Environmental, economic, and social impacts of sugar cane bagasse and eggshell wastes for soil stabilization.

Sustainability is a core topic for all sectors including geotechnical engineering (e.g., design of foundations, earthworks structures, and pavements for major infrastructure and building projects). Despite being comprised of environmental, economic, and social pillars, most sustainability studies in this area have focused on the first. Furthermore, social impacts and the three pillars integration are little explored. As a result, there is a lack of systemic and holistic assessments of innovative geotechnical alternatives. This research advances in this area by performing a complete sustainability assessment and integration of the environmental, economic, and social pillars of two expansive soil stabilization alternatives: (i) sugar cane bagasse ash combined with hydrated eggshell lime alkali-activated by sodium hydroxide (NaOH) and (ii) Portland cement. Individual analyses were carried out to determine the environmental, economic, and social impacts, and the single sustainability index. Alkali-activated binder dosages showed higher impacts in 4 out of 10 environmental categories. For both binders, high-density/low-binder dosages contributed to environmental and economic sustainability as they require lower quantities of raw materials and diesel for materials transportation. The total costs of alkali-activated binder dosages ($189.79 and $154.45) were higher than that of Portland cement ($72.49 and $54.04), mainly due to the high cost of NaOH acquisition. However, the alkali-activated binder dosages implied lower carbon dioxide (CO2) emissions and thus lower social cost of CO2. The alternative binder presented a higher positive social impact. The alkali-activated high-density/low binder dosage is the most sustainable soil stabilization strategy.

Glycerol Production from Undetoxified Lignocellulose Hydrolysate by a Multiresistant Engineered Candida glycerinogenes.

Glycerol is an important platform compound with multidisciplinary applications, and glycerol production using low-cost sugar cane bagasse hydrolysate is promising. Candida glycerinogenes, an industrial yeast strain known for its high glycerol production capability, has been found to thrive in bagasse hydrolysate obtained through a simple treatment without detoxification. The engineered C. glycerinogenes exhibited significant resistance to furfural, acetic acid, and 3,4-dimethylbenzaldehyde within undetoxified hydrolysates. To further enhance glycerol production, genetic modifications were made to Candida glycerinogenes to enhance the utilization of xylose. Fermentation of undetoxified bagasse hydrolysate by CgS45 resulted in a glycerol titer of 40.3 g/L and a yield of 40.4%. This process required only 1 kg of bagasse to produce 93.5 g of glycerol. This is the first report of glycerol production using lignocellulose, which presents a new way for environmentally friendly industrial production of glycerol.

Sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement to upgrade the lipid and fatty acid production in Chlorococcum sp. for biodiesel through an optimized binary solvent system.

Cost is the crucial impediment in commercializing microalgal biodiesel. Therefore, cultivating microalgae in cost-effective nutrients reduces the upstream process cost remarkably. Thus, in this study, sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement for Chlorococcum sp. and subsequent lipid extraction via an optimized solvent system for biodiesel production was investigated. Characterization of SBH revealed the presence of various monosaccharides and other sugar derivatives such as glucose, fructose, xylose, arabinose, etc. The maximum dry cell weight of 1.7 g/L was estimated in cultures grown in 10 mL SBH. Different solvents such as diethyl ether (DEE), chloroform (CHL), ethyl acetate (ETA), hexane (HEX), methanol (MET), ethanol (ETOH), acetone (ACE) and also combination of solvents (2:1 ratio) such as DEE: MET, CHL: MET, HEX: MET, HEX: ETOH was tested for lipid extraction efficacy. Among solvents used, 12.3% and 18.4% of lipids were extracted using CHL and CHL: MET, respectively, from 10 mL SBH amended cultures. However, the biodiesel yield was found to be similar at about 70.16 % in both SBH and no SBH-added cultures. The fatty acid profile of the biodiesel shows palmitic, oleic, linoleic, linolenic, and arachidonic acid as principal fatty acids. Further, the levels of SFAs, MUFAs, and PUFAs in 10 mL SBH-added cells were 24.67, 12.89, and 34.24%, respectively. Eventually, the fuel properties of Chlorococcum sp. biodiesel, satisfying international biodiesel standards, make the biodiesel a viable diesel substitute in the future.

CO2-Assisted Sugar Cane Gasification Using Transition Metal Catalysis: An Impact of Metal Loading on the Catalytic Behavior.

To meet the increasing needs of fuels, especially non-fossil fuels, the production of "bio-oil" is proposed and many efforts have been undertaken to find effective ways to transform bio-wastes into valuable substances to obtain the fuels and simultaneously reduce carbon wastes, including CO2. This work is devoted to the gasification of sugar cane bagasse to produce CO in the process assisted by CO2. The metals were varied (Fe, Co, or Ni), along with their amounts, in order to find the optimal catalyst composition. The materials were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), and electron diffraction, and were tested in the process of CO2-assisted gasification. The catalysts based on Co and Ni demonstrate the best activity among the investigated systems: the conversion of CO2 reached 88% at ~800 °C (vs. 20% for the pure sugarcane bagasse). These samples contain metallic Co or Ni, while Fe is in oxide form.

Sugarcane-bagasse-ash in enhanced mesophilic Co-digestion for biogas and nutrient recovery: A concept of developing rural circular bioeconomy.

Conductive agro-industrial wastes as accelerants in the anaerobic digestion (AD) of organic waste is a good technique for developing a rural circular economy, such as producing bioenergy and biofertilizer. This study disclosed the a role of sugar cane bagasse ash (SCBA) in enhancing the bioenergy (biogas) yield and digestate fertility via anaerobic co-digestion (AcoD) of buffalo dung (BD) and vegetable residue (VR) under mesophilic conditions (37 á´¼C). Firstly, an optimal BD/VR ratio (1:3) was determined based on biogas yield by introducing five different BD/VR ratios (1:0, 3:1, 1:1, 1:3, and 0:1) into AcoD systems. Secondly, the biogas yield was increased further by adding SCBA at five different concentrations (0, 0.5, 1, 1.5, and 2 wt%). Experimental results disclosed that the 1.5 wt% of SCBA gave the highest cumulative biogas yield (153.67 mL/g VS), COD removal rate (31.18%), and fertility (5.08%). Moreover, a framework is suggested to understand the role of SCBA in the enhanced DIET mechanism. This work documents an environmentally friendly and economical technique for developing a rural circular bioeconomy via the AD of organic agro-waste.

Power Output Enhancement of Natural Rubber Based Triboelectric Nanogenerator with Cellulose Nanofibers and Activated Carbon.

The growing demand for energy and environmental concern are crucial driving forces for the development of green and sustainable energy. The triboelectric nanogenerator (TENG) has emerged as a promising solution for harvesting mechanical energy from the environment. In this research, a natural rubber (NR)-based TENG has been developed with an enhanced power output from the incorporation of cellulose nanofibers (CNF) and activated carbon (AC) nanoparticles. The highest voltage output of 137 V, a current of 12.1 µA, and power density of 2.74 W/m2 were achieved from the fabricated NR-CNF-AC TENG. This is attributed to the synergistic effect of the electron-donating properties of cellulose material and the large specific surface area of AC materials. The enhancement of TENG performance paves the way for the application of natural-based materials to convert mechanical energy into electricity, as a clean and sustainable energy source.

Sustainable valorization of sugarcane residues: Efficient deconstruction strategies for fuels and chemicals production.

The global climate crisis and the ongoing increase in fossil-based fuels have led to an alternative solution of using biomass for fuel production. Sugarcane bagasse (SCB) is an agricultural residue with a global production of more than 100 million metric tons and it has various applications in a biorefinery concept. This review brings forth the composition, life cycle assessment, and various pretreatments for the deconstruction techniques of SCB for the production of valuable products. The ongoing research in the production of biofuels, biogas, and electricity utilizing the bagasse was elucidated. SCB is used in the production of carboxymethyl cellulose, pigment, lactic acid, levulinic acid, and xylooligosaccharides and it has prospective in meeting the demand for global energy and environmental sustainability.

Pseudomonas sp. NGC7 as a microbial chassis for glucose-free muconate production from a variety of lignin-derived aromatics and its application to the production from sugar cane bagasse alkaline extract.

cis,cis-Muconate (ccMA) is a promising platform for use in synthesizing various polymers. A glucose-free ccMA production using Pseudomonas sp. NGC7 from hardwood lignin-derived aromatic compounds was previously reported. In that system, syringyl nucleus compounds were essential for growth. Here, it is shown that NGC7 is available for glucose-free ccMA production even from a mixture of lignin-derived aromatics that does not contain syringyl nucleus compounds. By introducing a gene set for the protocatechuate (PCA)-shunt consisting of PCA 3,4-dioxygenase and PCA decarboxylase into an NGC7-derived strain deficient in PCA 3,4-dioxygenase and ccMA cycloisomerase, it was succeeded in constructing a ccMA-producing strain that grows on a lignin-derived aromatics mixture containing no syringyl nucleus compounds. Finally, it is demonstrated that the engineered strain produced ccMA from sugar cane bagasse alkaline extract in 18.7 mol%. NGC7 is thus shown to be a promising microbial chassis for biochemicals production from lignin-derived aromatics.

Efficient short-time hydrothermal depolymerization of sugarcane bagasse in one-pot for cellulosic ethanol production without solid-liquid separation, water washing, and detoxification.

In these studies, a low-cost and energy efficiency production of cellulosic ethanol from sugarcane bagasse (SCB) using one-pot without solid-liquid separation, water washing, and detoxification was performed. Firstly, SCB was pretreated using liquid hot water as the only reagent at 210 °C for a short time (0 min), and the solid liquid ratio (SLR) was 1:20 (w/v). Then, the whole slurry of pretreated SCB was enzymatically hydrolyzed and fermented for cellulosic ethanol in one-pot. The results indicated that the one-pot preparation for ethanol achieved a high total fermentable sugar conversion of 84.52 ± 1.24%, containing 88.61 ± 1.57% of glucose and 78.01 ± 1.63% of xylose. Moreover, the ethanol yield reached 257 ± 5.51 mg/g SCB, which was 77.56 ± 1.64% of the theoretical ethanol conversion from SCB. Importantly, there was no wastewater discharge in the whole process. Overall, the present work provides an economically feasible method for ethanol production.

Unveiling Xylanolytic Enzymes Production of Talaromyces wortmannii DR49 on Industrial Agro Wastes

Abstract Xylan degradation is an important step in different industries, such as in biorefinery for biomass hydrolysis. Talaromyces wortmannii is a known fungus due to second metabolite production but only few works showed the xylanolytic potential of this fungus. In this way, the aim of this study was to evaluate the production of xylanolytic enzymes from T. wortmannii DR49 on industrial agro wastes. Cultivation in shake flask showed highest xylanase titration (10.3 U/mL; 9.5 U/mL) for wheat bran (WB) and hydrothermal pretreated sugar cane bagasse (HB); in β-xylosidase production WB and xylose were the best carbon sources (0.57 U/mL; 0.34 U/mL) respectively. STR cultivation revealed that 29°C and pH 6.0 were the best conditions for xylanase (14.5 U/mL) and β-xylosidase (1.7 U/mL) production. T. wortmannii DR49 showed to be a potential candidate for xylanolytic enzymes production using agro wastes in bioreactors, which has never been previously reported in this fungus.

Corrosion Behavior of Steel-Reinforced Green Concrete Containing Recycled Coarse Aggregate Additions in Sulfate Media.

Novel green concrete (GC) admixtures containing 50% and 100% recycled coarse aggregate (RCA) were manufactured according to the ACI 211.1 standard. The GC samples were reinforced with AISI 1080 carbon steel and AISI 304 stainless steel. Concrete samples were exposed to 3.5 wt.% Na2SO4 and control (DI-water) solutions. Electrochemical testing was assessed by corrosion potential (Ecorr) according to the ASTM C-876-15 standard and a linear polarization resistance (LPR) technique following ASTM G59-14. The compressive strength of the fully substituted GC decreased 51.5% compared to the control sample. Improved corrosion behavior was found for the specimens reinforced with AISI 304 SS; the corrosion current density (icorr) values of the fully substituted GC were found to be 0.01894 µA/cm2 after Day 364, a value associated with negligible corrosion. The 50% RCA specimen shows good corrosion behavior as well as a reduction in environmental impact. Although having lower mechanical properties, a less dense concrete matrix and high permeability, RCA green concrete presents an improved corrosion behavior thus being a promising approach to the higher pollutant conventional aggregates.

Corrosion Behavior of AISI 304 Stainless Steel Reinforcements in SCBA-SF Ternary Ecological Concrete Exposed to MgSO4.

In this study, ternary ecological concrete (TEC) mixtures were produced with partial substitution of the ordinary Portland cement (OPC) by 10%, 20%, and 30% of sugar cane bagasse ash (SCBA) and silica fume (SF); a control mixture (100% OPC) was prepared according to ACI 211.1 standard. The studied TEC specimens were reinforced with AISI 304 stainless steel and AISI 1018 carbon steel rebars. TEC reinforced specimens were immersed in two different electrolytes, a control (DI-water) and 3.5 wt.% MgSO4 solution, for 180 days. The electrochemical corrosion was monitored by corrosion potential (Ecorr) according to ASTM C-876-15 standard, and the linear polarization resistance (LPR) technique using ASTM G59 standard. The Ecorr and current density icorr results show that AISI 304 stainless steel rebars have a high corrosion resistance, with icorr values below 0.1 µA/cm2, which is interpreted as a level of negligible corrosion. The best corrosion performance was found for the TEC mixture made with a 20% addition of blend of sugar cane bagasse ash-silica fume (SCBA-SF) to the OPC.

Adsorption and Desorption Performance and Mechanism of Tetracycline Hydrochloride by Activated Carbon-Based Adsorbents Derived from Sugar Cane Bagasse Activated with ZnCl2.

Adsorption and desorption behaviors of tetracycline hydrochloride by activated carbon-based adsorbents derived from sugar cane bagasse modified with ZnCl2 were investigated. The activated carbon was tested by SEM, EDX, BET, XRD, FTIR, and XPS. This activated carbon exhibited a high BET surface area of 831 m2 g-1 with the average pore diameter and pore volume reaching 2.52 nm and 0.45 m3 g-1, respectively. The batch experimental results can be described by Freundlich equation, pseudo-second-order kinetics, and the intraparticle diffusion model, while the maximum adsorption capacity reached 239.6 mg g-1 under 318 K. The effects of flow rate, bed height, initial concentration, and temperature were studied in fixed bed adsorption experiments, and adsorption data were fitted with six dynamic adsorption models. The results of characterizations and the batch experiments were analyzed to study the adsorption and desorption mechanisms. Tetracycline hydrochloride and activated carbon were bonded together by π-π interactions and cation-π bonds. Ethanol was used as an eluent which bonded with 10 hydrogen bond acceptors on tetracycline hydrochloride to form a complex by hydrogen bonding to achieve recycling.

Pozzolanic properties of ultrafine sugar cane bagasse ash produced by controlled burning.

This paper evaluated the feasibility of using residual sugar cane bagasse ash with a high carbon content (as-received SCBA) as raw material to produce a pozzolan after controlled recalcination and grinding. Initially, the as-received SCBA was re-burned using rotary (continuous) and muffle (batch) kilns, both at 600 °C for 1 h. Next, the resulting ash was ground in a closed-circuit ball mill with an air classifier system to obtain a product with 50% passing particle size of approximately 10 µm (SCBA600). SCBA600 was then characterized in terms of oxide composition, loss on ignition, density, specific surface area, and pozzolanic activity. A hydration study was carried out using isothermal calorimetry, thermogravimetric analysis and mercury intrusion porosimetry. Additionally, the performance of SCBA600 in mortars was evaluated by axial compression tests. The combination of recalcination at 600 °C, low-energy ultrafine grinding of the material and classification resulted in pozzolanic SCBA. The results also showed that including SCBA600 in cement mortars reduced total accumulated heat and portlandite content in cement-based pastes, in addition to refining pore structure and significantly increasing compressive strength after 3 days of curing.

Reciclagem de éter-aminas, utilizadas na flotação de minério de ferro, por meio da adsorção / Recycling of éther-amines, used in iron ore flotation, by adsorption

RESUMO O presente trabalho teve por objetivo verificar uma possível rota de reciclagem para as éter-aminas, utilizadas para aumentar a eficiência do processo de flotação catiônica reversa do minério de ferro. Estudou-se um método de separação físico-química utilizando TANFLOC como floculante. As águas de rejeito contêm, em sua maior parte, amina e sílica, e o objetivo desse método era separar a sílica do rejeito. A separação físico-química, porém, não foi eficaz, visto que o processo não foi capaz de flocular somente a sílica, floculando também parte da éter-amina. Foi avaliado também o processo de adsorção e, para tanto, utilizaram-se como materiais adsorventes a serragem Angelim e bagaço de cana-de-açúcar, ambos in natura. Esses materiais foram capazes de remover aproximadamente 95 e 90% de éter-amina, com capacidades adsortivas de 4,2 e 2,7 mg.g-1, respectivamente, utilizando massa de 1,5 g e estabelecendo tempo de equilíbrio de 30 minutos. Verificou-se que a eficiência de remoção é maior em pH próximo a 10. Pelos estudos termodinâmicos foi possível concluir, para a serragem, que o processo é termodinamicamente favorável e exotérmico. Para o bagaço de cana não foi possível analisar o comportamento termodinâmico. Além disso, o processo de dessorção permitiu recuperar em torno de 80% de éter-amina, além da possibilidade de regeneração e reutilização dos materiais adsorventes, o que mostra a viabilidade de reciclar a éter-amina pelo mecanismo de adsorção.

ABSTRACT The present work has the objective of investigating the possible recycling route for ether-amines, used for improving the efficiency of the process of iron ore's reverse flotation. A physical-chemical separation method has been studied using TANFLOC as flocculant. The wastewater contains, mainly, amine and silica, and the objective of this method was to separate the silica from the waste by flocculation. However, this method was not effective, as flocculation was not able to flocculate only silica, but also part of the ether-amine. Furthermore, the process of adsorption was assessed, and for this it was used as materials adsorbents Angelim's sawdust and sugar cane bagasse, both in natura, with which it was possible to remove approximately 95 and 90% of ether-amines, with adsorptive capacity of 4,2 and 2,7 mg.g-1, respectively, by using a mass of 1.5 g and a settling time of 30 minutes. It was verified that the removal efficiency is greater at a pH around 10. Thermodynamic studies were carried out and they were able to state, for sawdust, that this process is thermodynamically favorable and exothermic. In the case of sugar cane bagasse, it was not possible to analyze its thermodynamic behavior. In addition, the use of desorption revealed the possibility of regaining around 80% of the ether-amines. This proved that it is possible to recycle ether-amines by the adsorption mechanism.

Characteristics and Applications of Sugar Cane Bagasse Ash Waste in Cementitious Materials.

Sugar cane bagasse ash (SCBA) is an abundant byproduct of the sugar and ethanol industry. SCBA is generally used as a fertilizer or is disposed of in landfills, which has led to intensified environmental concerns. In recent years, SCBA research has mainly been focused on utilization in construction materials due to the abundance and pozzolanic characteristics of SCBA. In this paper, a comprehensive review of the state-of-the-art morphology, physical properties, chemical composition, and mineralogical composition of SCBA is presented. Studies indicate that SCBA is a potentially promising construction material. The applications of SCBA as a pozzolanic material, a new source for preparing alkali-activated binders, aggregates, and fillers in construction materials, are summarized. The impacts of SCBA on fresh and hardened concrete properties are highlighted, including the physical properties, mechanical strength, microstructure, and durability. Key factors that govern pozzolanic activity are discussed in detail, including calcination and recalcination temperatures, and durations, fineness, loss on ignition (LOI), and crystal silicon dioxide. Finally, further research on the optimal and broad utilization of SCBA in construction materials is recommended.

Agroindustrial biomass for xylanase production by Penicillium chrysogenum: purification, biochemical properties and hydrolysis of hemicelluloses

Background: In this work, the xylanase production by Penicillium chrysogenum F-15 strain was investigated using agroindustrial biomass as substrate. The xylanase was purified, characterized and applied in hemicellulose hydrolysis. Results: The highest xylanase production was obtained when cultivation was carried out with sugar cane bagasse as carbon source, at pH 6.0 and 20°C, under static condition for 8 d. The enzyme was purified by a sequence of ion exchange and size exclusion chromatography, presenting final specific activity of 834.2 U·mg·prot-1. T he molecular mass of the purified enzyme estimated by SDS-PAGE was 22.1 kDa. The optimum activity was at pH 6.5 and 45°C. The enzyme was stable at 40°C with half-life of 35 min, and in the pH range from 4.5 to 10.0. The activity was increased in the presence of Mg+2 and Mn+2 and reducing agents such as DTT and ßmercaptoethanol, but it was reduced by Cu+2 and Pb+2 . The xylanase presented Km of 2.3 mM and Vmax of 731.8 U·mg·prot-1 with birchwood xylan as substrate. This xylanase presented differences in its properties when it was compared to the xylanases from other P. chrysogenum strains. Conclusion: The xylanase from P. chrysogenum F-15 showed lower enzymatic activity on commercial xylan than on hemicellulose from agroindustry biomass and its biochemistry characteristics, such as stability at 40°C and pH from 4.0 to 10.0, shows the potential of this enzyme for application in food, feed, pulp and paper industries and for bioethanol production.

Sugar-cane bagasse derived cellulose enhances performance of polylactide and polydioxanone electrospun scaffold for tissue engineering.

Bagasse is a waste product of sugar extraction from sugar-cane with approximately 30% cellulose content. Cellulose was successfully extracted from sugar-cane bagasse using a modified mercerization-bleaching approach with a 40% yield. Extracted cellulose was converted to cellulose acetate for enhanced electrospinnability and blended with poly-l-Lactide or polydioxanone before solution electrospinning. Physico-chemical evaluation of the electrospun mats showed variable miscibility of blends. In vitro cell studies with L929 mouse fibroblast cells was quite conclusive as regards the biocompatibility of the blended mats with proliferative behavior of cells, extracellular matrix deposition and characteristic features of healthy cellular response. MTT assay indicated that the cellulose blended mats induced higher cell densities than the controls. Cellulose content influenced parameters such as fiber diameter, porosity and cell-matrix interaction of mats impacting on cell growth and behavior. Preliminary assessment of biomineralization potential of the mats by SEM showed nano-hydroxyapatite deposits on the electrospun fibers.

Evaluación de levaduras nativas productoras de etanol presentes en el bagazo de caña de azúcar / Evaluation of producing ethanol native yeasts present in sugar cane bagasse

RESUMEN La hidrólisis química o enzimática del bagazo de caña de azúcar permite la obtención de azúcares fermentables, utilizados en la producción biotecnológica de etanol, mediante el empleo de levaduras comerciales o autóctonas obtenidas de diferentes materiales lignocelulósicos. El objetivo de este trabajo fue valorar la capacidad de producción de e tanol de cepas de levaduras nativas, aisladas en medio YPD e hidrolizado de bagazo de caña de azúcar, concentrado hasta un 75 %. Utilizando como variables de estudio el tipo de cepa y el tiempo de proceso, se realizó un análisis multifactorial (ANOVA) para su evaluación. Los resultados obtenidos con la cepa seleccionada UAT-3, fueron para Yp/s de 0.441 7 g/g y QP de 0.076 7 g/L-h a las 120 h. Las condiciones de proceso utilizadas en el presente estudio permitieron aislar y seleccionar cepas nativas de Sacharomyces cereviseae, con características adecuadas para ser utilizadas en procesos biotecnológicos industriales de producción de etanol, utilizando como sustrato residuos o subproductos derivados de la in dustria azucarera como el bagazo de caña de azúcar.

ABSTRACT The chemical or enzymatic hydrolysis of sugar cane bagasse, allows the obtaining of fermentable sugars used in the biotechnological production of ethanol by using commercial or native yeasts obtained from different lignocellulosic materials. The purpose of this study was to assess the production capacity of ethanol from a native yeast strain isolated in YPD and hydrolyzed sugar cane bagasse concentrated up to 75 %. Using as study variables the type of strain and processing time, a multivariate analysis (ANOVA) was performed for its evaluation. The results achieved with the selected strain UAT-3, were 0.441 7 g/g for Yp/s and 0.076 7 g/L-h to 120 h for QP. The process conditions used in the present study allowed to isolate and select native strains of Sacharomyces cereviseae, with characteristics suitable to be used in industrial biotechnological proceses of ethanol production, using as substrate residues or by-products derived from the sugar industry such as bagasse of sugar.

Removal of Cu (II) ion from water using sugar cane bagasse cellulose and gelatin based composite hydrogels.

Several composite hydrogels were prepared by in situ incorporation of sugarcane bagasse cellulose (CB) and a natural polymer gelatin (GT) in to the polyacrylic copolymer network by free radical solution polymerization. The hydrogels were characterized by FTIR, XRD, TGA, DMA, SEM, EDAX, pH at point zero charge and swelling reversibility at varied pH in water. The effects of the synthesis parameters on sorption of Cu (II) from water by the resulting hydrogels were studied and the results were optimized by response surface methodology (RSM) with Box-Behnken design (BBD). The hydrogel prepared with optimized parameters was further studied for sorption of Cu (II) at varied process conditions.