ABSTRACT
Infrared Thermography (IRT) has become an assistance tool in medicine and is used to noninvasively evaluate heat elimination during and after inflammatory processes or during the recovery period. However, its application in veterinary patients undergoing physiotherapy is a field that requires deep research. This review aims to analyze the application of IRT in the monitoring of animal physiotherapy, using the thermal changes that are present in patients undergoing gait or lameness issues (e.g., inflammation, pain, increased local temperature) as a neurobiological basis. Rehabilitation techniques such as acupuncture, physical therapies, thermotherapy, photo-biomodulation, and electrostimulation have been reported to have an anti-inflammatory effect that decreases the amount of local heat production, which is heat that can be recorded with IRT. Therefore, IRT could be used as a complementary tool to evaluate the effectiveness of the therapy, and it is suggested that further studies evaluate the accuracy, sensibility, and sensitivity of IRT.
ABSTRACT
Many tropical species live close to their thermal limits within a narrow niche. Here, we investigate the ecophysiological limits of the tropical tree Podocarpus trinitensis, which is endemic to Trinidad and Tobago where most populations exist as isolated stands on hilltops. Five wild stands from a range of elevations were compared in the field with measurements of leaf temperature, canopy cover, stomatal conductance (gs), chlorophyll content and several chlorophyll fluorescence parameters. A parallel greenhouse experiment was used to acclimate seedlings to 'CONTROL' and 'HEAT' treatments (with mid-day air temperatures of 34.5 and 37 °C respectively), after which the above parameters were measured along with photosynthetic light and temperature response curves, leaf morphology and in vitro Fv/Fm thermostability. There was a positive association between improved physiological performance and elevation. In the high elevation sites, leaf temperatures were significantly lower while most of the physiological parameters were higher (gs, chlorophyll content, ɸ PSII, ETRmax and Isat90). In the greenhouse, HEAT and CONTROL plants were similar for most parameters, except leaf temperature (which was coupled with air temperature) and leaf mass per unit area (which was higher in HEAT plants). Temperature response curves showed an optimum temperature for photosynthesis of 30 ± 0.5 °C (TOpt) and in vitro Fv/Fm indicated a critical temperature of 47.4 ± 0.38 °C for HEAT and 48.2 ± 0.24 °C for CONTROL (T50), with no indication of heat acclimation. Podocarpus trinitensis was found to be shade tolerant. In the field, seedlings established under a close canopy (>95% canopy cover) and had a low light saturation point (LCP). In the greenhouse, where more light was available, seedlings retained a low light compensation point, light saturation point (LSP) and maximum photosynthetic rate (Amax). The results suggest that P. trinitensis is moderately heat tolerant with the higher elevation sites being more habitable, but stands are also able to survive near sea level under a closed canopy. The narrow niche, along with the 30 ± 0.5 °C optimum temperature for photosynthesis and the lack of thermal plasticity in critical temperature, suggests that P. trinitensis has little room to acclimate to temperatures higher than those currently experienced.
Subject(s)
Tracheophyta , Trees , Trees/physiology , Photosynthesis/physiology , Chlorophyll , Plant Leaves/physiology , Temperature , Seedlings/physiologyABSTRACT
Hg-Cd-Te (MCT) cameras can be used to analyze the thermal emission or the infrared reflective response of physical systems. However, measurements performed with this instrument need to be corrected for the thermal emission from the environment surrounding the camera. In this work we analyzed this effect under conditions typically met in field applications, when environmental temperature variations are common. The dark current signal on a Xeva MCT 320 CL TE4 camera was studied as a function of ambient temperature and the integration time used for image acquisition. The MCT sensor at the focal plane was kept at a constant nominal temperature of 210 K by a thermoelectric cooler unit throughout the experiment. Integration times for data acquisition varied between 2.0 to 12.0 ms. The camera body temperature was monitored within ±0.2°C, ranging from about 17.0°C to 27.0°C. The camera unit was allowed to reach thermal stabilization in a controlled-temperature lab before each measurement session. Both the integration time, and temperature range intervals were chosen to represent typical field deployment conditions. The average dark current signal showed a clear linear dependence with integration time, for a constant environmental temperature setting. The slope of this linear relation increased with the ambient temperature, whereas the intercept was insensitive to temperature changes. The standard deviation of the dark current signal was a function of integration time, but independent of the ambient temperature setting. These results allowed modeling the dark current signal as a function of the integration time and the camera body temperature. To minimize the dark current for a given integration time setting, measurements should be performed under the coldest possible conditions, in opposition to manufacturer recommendations. As a direct consequence of these results, the useful dynamic range for science applications with this MCT camera is reduced with increasing integration times and ambient temperatures. For instance, when acquiring images with 5 ms integration time, at 22°C ambient temperature, the resulting dark current signal reduces the maximum useful dynamic range in about 20%. The results shown here can be promptly adapted to other applications with MCT cameras, especially in situations with a non-controlled thermal environment, or when analyzing the reflective properties of cold targets.
ABSTRACT
A method for the synthesis of a linear block copolymer (PNIPAM-b-PANI), containing a thermoresponsive block (poly(N-isopropylacrylamide), PNIPAM) and a Near Infrared (NIR) light-absorbing block (polyaniline, PANI), is reported. The synthetic approach involves a two-step successive polymerization reaction. First, the radical polymerization of NIPAM is done using 4-aminothiophenol as a chain transfer agent for the obtention of thermosensitive block terminated with an aniline (ANI) moiety. Second, the oxidative polymerization of ANI is initiated in ANI moiety of thermosensitive block to grow the second conductive PANI block. 1H nuclear magnetic resonance (NMR) and FT-IR spectroscopy shows the characteristics peaks of both polymeric blocks revealing the successful copolymerization process. Static Light Scattering (SLS) and UV-Visible combined measurements allowed the determination of the Mw for PNIPAM-b-PANI macromolecule: 5.5 × 105 g mol-1. The resulting copolymer is soluble in water (8.3 g L-1) and in non-aqueous solvents, such as ethanol, formic acid, acetonitrile, and others. Both polymer blocks chains show the properties of the polymer chains. The block copolymer shows a lower critical solution temperature (LCST) at the same temperature (32-34 °C) than PNIPAM, while the copolymer shows pH dependent UV-vis-NIR absorption similar to PANI. The PNIPAM block suffers a coil to globule transition upon NIR light irradiation (785 nm, 100 mW), as shown by turbidimetry and Atomic Force Microscopy (AFM), due to local heating (more than 9 °C in 12 min) induced by the NIR absorption at the PANI block. Furthermore, the electrical conductivity of PNIPAM-b-PANI thin films is demonstrated (resistivity of 5.3 × 10-4 Ω-1 cm-1), indicating that the PANI block is present in its conductive form.
ABSTRACT
Temperature is a major driver of biological phenomena, from metabolism to ecological interactions and rates of evolutionary diversification. However, species vary greatly in their thermal tolerance, as well as the temperature under which they perform best. This study aimed to investigate the effect of experimental manipulation of environmental temperatures on the individual mortality and phenotypic composition of colonies of Melipona interrupta. To fulfill these objectives, 30 colonies in equivalent developmental conditions were artificially subjected to different temperatures. Temperatures were monitored by thermo-hygrometers, and immature mortality and sex and caste ratios were observed in brood combs during 14 months. A strong effect of external temperature on immatures was detected on deviations from 28 to 30 °C (the natural average temperature inside the colony), causing an increase in mortality. Likewise, a significant effect of temperature on sex ratio was detected, with male:female ratio decreasing at temperatures below and above 28-30 °C. Lastly, there was no clear evidence for an effect of temperature on caste ratio, although queens appeared to become relatively more frequent at warmer temperatures. The results of this study allow us to conclude that anthropogenic changes, whose effect can be extrapolated to the similar natural changes, that modify the environmental temperatures to which M. interrupta colonies are exposed are likely to compromise their survival, mainly through individual mortality.