Low Rates of Hardware Removal and Tendon Rupture for the Acu-Loc 2 Volar Distal Radius Plate: A Minimum One-Year Follow-Up Study.

AIM: Volar locking plates designed for far distal radius fracture fixation can have a significant hardware removal rate and risk of tendon rupture. Plate design has a role in the rate of complications. This study assessed the hardware removal and tendon rupture rate of the Acu-Loc 2 volar distal radius (VDR) plate often used in the treatment of far distal radial fractures. METHOD: We searched our electronic healthcare records system for all patients who had undergone fixation with an Acu-Loc 2 VDR plate (Acumed, Hillsboro, OR, USA) at a tertiary center between January 2017 and December 2021. Patients were excluded if their follow-up time was less than one year or if they could not be contacted by telephone follow-up. Pre-operative radiographs were examined for fracture classification. Follow-up time was defined as the last contact in the clinic or by telephone. RESULTS: A total of 92 patients underwent an open reduction and internal fixation (ORIF) with an Acu-Loc 2 VDR plate. A total of 85 patients met the inclusion criteria for this study. Our cohort included 33 males (38.8%) and 52 females (61.2%). The mean age was 50 years. Twenty-seven fractures (31.0%) were extra-articular, and 60 fractures (69.0%) were intra-articular. The mean follow-up time for the patients was 593.3 days (range 369 to 1185 days). Four patients (4.7%) had their hardware removed. Three (3.5%) patients underwent removal due to tendon irritation and one patient (1.2%) due to a peri-prosthetic fracture around the plate. There were no tendon ruptures recorded. CONCLUSION: The Acu-Loc 2 VDR plate had a low medium-term hardware removal rate and no tendon ruptures. These rates are lower than would be expected when compared with other far distal plate designs.

Distal radius fracture osteosynthesis by volar locking plate: influence of epiphyseal screw positioning on risk of loss of reduction.

Ulnar variance is an important radiological parameter for good functional outcome after distal radius fracture osteosynthesis. Secondary loss of reduction due to radial shortening is a common complication after volar locking plate fixation. Some authors recommend beginning by placing the most ulnar epiphyseal screw, ensuring that it is positioned as close as possible to the distal radioulnar and radiocarpal joints. The hypothesis of our study was that the positioning of the ulnar epiphyseal screw relative to the distal radioulnar and radiocarpal joints influences the maintenance of reduction during follow-up. 190 distal radius fractures were treated with volar locking plate fixation and divided into two cohorts: cohort A with <2 mm and cohort B with ≥2 mm loss of ulnar variance. Minimum follow-up was 45 days. The positioning of the most ulnar epiphyseal screw was evaluated using a single variable, the ulno-distal index. Means were compared using t-tests and proportions using chi-squared tests. The alpha risk was set at 5%. The intra- and inter-observer reliability of the ulno-distal index measurement were assessed. Mean ulno-distal index was significantly lower in cohort A at 11.28 mm, compared to 13.33 mm in cohort B; p < 0.0001. Ulno-distal index <12 mm was a significant protective factor: p < 0.0001 and relative risk 0.558. No other intrinsic or extrinsic factors of secondary loss of reduction significantly influenced the risk of ulnar variance alteration. The study confirmed the hypothesis that, in distal radius fracture treated with volar locking plate fixation, the closer the ulnar epiphyseal screw to the distal radioulnar joint and radiocarpal joint, the lower the risk of ulnar variance alteration.

Management of Lunate Facet Escape after Distal Radius Fracture Volar Plating: Surgical Technique.

Fractures involving the lunate facet of the distal radius (commonly called the volar ulnar corner or "critical corner") are often difficult to recognize radiographically. "Lunate facet escape" refers to the displacement of this fragment after attempted distal radius fracture closed or open reduction methods. Lunate facet escape can have severe consequences including carpal collapse with pain, instability, and arthritis. Challenges to lunate facet fixation include irregular cortical contour that makes plate fixation difficult, as well as deforming forces by inserting structures. The goal of the management of a distal radius fracture with lunate facet involvement is first identification, then adequate stabilization until osseous healing occurs. However, subsequent lunate facet escape can pose a challenging clinical and surgical dilemma. Here we discuss our preferred approach to treat lunate facet escape after distal radius fracture volar locking plating failure.

Small volar fragment in the lunate fossa leads to volar tilt loss after volar plate fixation for AO/OTA type-C distal radius fracture.

OBJECTIVES: The relationship between volar fragment size and postoperative volar tilt loss in complete articular distal radius fracture is not well known. In this study, we measured precise radiological parameters to help identify other factors that might contribute to volar tilt loss. MATERIAL AND METHODS: We retrospectively reviewed the radiological examinations and charts of 256 patients with distal radial fracture who underwent volar locking plate fixation between March 2014 and July 2022. Radiological parameters were measured based on preoperative CT and immediate postoperative radiographs. Univariate and multivariate linear regression analysis was performed to identify relevant factors associated with volar tilt loss following volar locking plate fixation. The receiver operating characteristic curve was used to identify the cutoff value of the independent parameters. RESULTS: On univariate analysis, 2 radiologic parameters on preoperative CT (volar fragment length at the lunate fossa, and teardrop angle) and 4 on immediate postoperative X-ray (radial inclination, radial length, capitate shift, and volar tilt) were significantly associated with postoperative volar tilt loss. On multivariate linear regression analysis, the risk of volar tilt loss increased as the capitate moved toward the back of the radial shaft. The cut-off for anteroposterior length in the lunate fossa was 6.5 mm. CONCLUSIONS: AO/OTA type-C distal radius fractures with <6.5 mm anteroposterior length in the lunate fossa had significantly higher rates of malunion with dorsal deformity. In addition, preoperative teardrop angle <37.2 ° and immediate postoperative volar tilt <3.7º are also predictors of postoperative volar tilt loss.

Teardrop Alignment Changes After Volar Locking Plate Fixation of Distal Radius Fractures With Volar Ulnar Fragments.

BACKGROUND: We assessed factors associated with change in radiographic teardrop angle following volar locking plate (VLP) fixation of volarly displaced intra-articular distal radius fractures with volar ulnar fragments (VUF) within the ICUC database. The primary outcome was change in radiographic alignment on follow-up imaging, defined as a change in teardrop angle from intra-operative fluoroscopy greater than 5°. METHODS: Patients with distal radius fractures treated with a VLP within the ICUC database, an international collaborative and publicly available dataset, were identified. The primary outcome was volar rim loss of reduction on follow-up imaging, defined as a change in radiographic alignment from intra-operative fluoroscopy, teardrop angle less than 50°, or loss of normal radiocarpal alignment. Secondary outcomes were final range of motion (ROM) of the affected extremity. Radiographic Soong classification was used to grade plate position. Descriptive statistics were used to assess variables' distributions. A Random Forest supervised machine learning algorithm was used to classify variable importance for predicting the primary outcome. Traditional descriptive statistics were used to compare patient, fracture, and treatment characteristics with volar rim loss of reduction. Volar rim loss of reduction and final ROM in degrees and as compared with contralateral unaffected limb were also assessed. RESULTS: Fifty patients with volarly displaced, intra-articular distal radius fractures treated with a VLP were identified. Six patients were observed to have a volar rim loss of reduction, but none required reoperation. Volar ulnar fragment size, Soong grade 0, and postfixation axial plate position in relation to the sigmoid notch were significantly associated (P < .05) with volar rim loss of reduction. All cases of volar rim loss of reduction occurred when VUF was 10.8 mm or less. CONCLUSIONS: The size of the VUF was the most important variable for predicting volar rim loss of reduction followed by postfixation plate position in an axial position to the sigmoid notch and the number of volar fragments in the Random Forest machine learning algorithm. There were no significant differences in ROM between patients with volar ulnar escape and those without.

Volar Locking Plating of Extra-articular Distal Radius Fracture: A Retrospective Clinical Study Comparing Locking Screws versus Smooth Locking Pegs.

Background Open reduction and internal fixation of distal radius fractures is one of the most common procedures performed in wrist surgery. The use of volar locking plate has gained increasing interest in the past decade. Epiphyseal fixation can be done either with locking screws or smooth locking pegs, with no evidence supporting the use of one rather than the other. Purpose The aim of this study is to compare the stability of distal radius fixation by volar locking plate using locking screws or smooth locking pegs. Methods Adult patients with A2-A3 AO fractures treated with a volar plate with locking screws only or smooth locking pegs only were retrospectively included. Radiographic assessment was performed to evaluate extra-articular parameters in the intraoperative postreduction and fixation period and after bony healing. Forty-seven distal radius fractures were included. Results Twenty-four fractures had fixation with locking screws and 23 had fixation with smooth locking pegs. For both groups, all radiographic parameters measured showed a statistically significant difference between the intraoperative postreduction and fixation period and the remote postoperative period after union of the fracture ( p < 0.05) attesting a slight loss of reduction. Nevertheless, there were no significant differences between the groups in radiographic extra-articular parameters. Conclusion This clinical study shows that there is no difference in stability fixation between locking screws or smooth locking pegs in A2-A3 distal radius fractures. Clinical Relevance The use of smooth locking pegs only for epiphyseal fixation appears to be safe in volar plating of A2-A3 distal radius fractures in adult patients and could be an alternative to locking screws. More clinical data are needed to confirm these results. Level of Evidence Level III; retrospective comparative study.

Study of the position of six volar locking plates for distal radius fracture relative to the watershed line.

INTRODUCTION: Volar plate malpositioning in the treatment of distal radial fracture can lead to tendinitis or even tendon tear, especially when the plate position is very distal. We studied the impact of design on plate position in the distal radius. The primary aim was to compare the position of six volar wrist plates relative to the watershed line using the Soong classification. The secondary objectives were to assess the epidemiology of volar locking plate fixation within the administrative Département of Finistère (northwestern France) and to study whether the type of fracture played a role in plate position. HYPOTHESIS: The plate design itself influences positioning relative to the watershed line on the Soong classification. MATERIALS AND METHODS: A total of 2723 volar locking plate fixation cases were analyzed and categorized according to the Soong classification. Plates used were divided into six groups based on design: Zimmer Biomet®, Newclip Technics®, Stryker®, Synthes®, Medartis® and Medartis® Footprint. The number of Soong 0 + 1 plates (i.e., plates graded 0 and 1 taken together) was determined for each design, then compared using the Marascuilo procedure with a significance level of α = 0.05. RESULTS: On the Marascuilo procedure, we found significant differences in the number of Soong grade 0 + 1 plates. The Zimmer Biomet and Newclip Technics® plates were significantly more often proximal to the watershed line than the Synthes and Medartis Footprint plates. Plate position with the Medartis® design was significantly more proximal to the watershed line than for its companion design, the Medartis® Footprint plate. The rate of volar locking plate fixation of distal radial fractures over the past 10 years increased in Finistère. Also, the type of fracture affected the choice of plate when different designs were available within a hospital center (Medartis® Footprint plate used in 2R3A fractures). CONCLUSION: Our study highlights a significant difference in volar locking plate position relative to the watershed line between the various models available. Plate design is a deciding factor when treating distal radial fracture, to avoid impingement when implant removal is not routinely planned.

CT-Based Micromotion Analysis After Locking Plate Fixation of AO Type C Distal Radius Fractures.

Background: Volar locking plate fixation (VLPF) is the most common method for operative fixation of distal radius fractures (DRF). The dorsal ulnar corner (DUC) can be difficult to stabilize as the fragment is small and not exposed when using the volar approach. The purpose of this study was to study fracture fragment migration after VLPF of AO type C DRF, using a volume registration technique of paired CT scans with special focus on the DUC fragment. Materials and Methods: This pilot study included ten patients with AO type C DRF, all operated with VLPF. The primary outcome was radiographic outcome. Postoperative and 1-year scans were compared and analyzed. Fragment migration was assessed with CT-based micromotion analysis (CTMA), a software technique used for volume registration of paired CT scans. Results: All plates were stable over time. Two patients showed signs of screw movement (0.2-0.35 mm and 0.35- > 1 mm respectively). Postoperative reduction was maintained, and there was no fragment migration at the 1-year follow-up except for one case with increased dorsal tilt. The DUC fragment was found in 8/10 cases, fixated in 7/8 cases, and not dislocated in any case at the 1-year follow-up. Conclusion: The CTMA results indicate that variable-angle VLPF after AO type C DRF can yield and maintain a highly stable reduction of the fracture fragments. The DUC fragment remained stable regardless of the number of screws through the fragment. CT volume registration can be a valuable tool in the detailed assessment of fracture fragment migration following volar plate fixation of DRFs.

Comparison of the cast and volar locking plate in the treatment of intra-articular distal radius fractures in elderly patients over 75 years of age.

Background: We aimed to compare radiologically and clinically closed reduction circular casting (CRCC) and volar locking plate (VLP) treatment options in elderly patients over 75 years with intraarticular distal radius fracture (DRF). Material and method: Elderly patients aged ≥75 years with at least one year of follow-up from the clinic archive who underwent conservative (CRCC) and surgical (VLP) treatment for AO type C DRF were retrospectively included in the study. Thirty-seven patients treated conservatively with CRCC and 31 treated surgically with VLP were compared as two groups. Quick Disability of the Arm, Shoulder, and Hand (QDASH) and Visual Analog scores (VAS) were evaluated functionally. In addition, a rapid assessment of physical activity (RAPA) score evaluation was performed since these patients were elderly. In addition, radiologic findings, wrist range of motion, and complications were evaluated. Results: There was no difference between the CRCC and VLP groups regarding QDASH, VAS, and RAPA scores at the last follow up. Radiologically, there were significant differences between the groups regarding radial height, volar tilt, radial inclination and joint stepping. (respectively p= <0.001, p= <0.001, p= <0.001, p= <0.001). Conclusion: In elderly patients over 75 years of age with intra-articular DRF, surgical treatment with VLP results in better radiologic results compared to conservative treatment with CRCC, although both treatment options lead to similar results in terms of functional outcomes.

The Effect of an Intraoperative Real-Time Counter on Radiation Exposure Events During Operative Treatment of Distal Radius Fractures.

PURPOSE: Occupational radiation exposure can have adverse health consequences for surgeons. The purpose of this study was to determine if utilization of an intraoperative, real-time radiograph counter results in decreased radiation exposure events (REEs) during open reduction and internal fixation (ORIF) of distal radius fractures (DRFs). METHODS: We reviewed all cases of isolated ORIF DRFs performed at a single center from January 2021 to February 2023. All cases performed on or after January 1, 2022 used an intraoperative radiograph counter, referred to as a "shot-clock" (SC) group. Cases prior to this date were performed without a SC and served as a control group (NoSC group). Baseline demographics, fracture, and surgical characteristics were recorded. Final intraoperative radiographs were reviewed to record reduction parameters (radial inclination, volar tilt, and ulnar variance). REEs, fluoroscopy exposure times, and total radiation doses milligray (mGy) were compared between groups. RESULTS: A total of 160 ORIF DRF cases were included in the NoSC group, and 135 were included in the SC group. The NoSC group had significantly more extra-articular fractures compared with the SC group. Reduction parameters after ORIF were similar between groups. The mean number of REEs decreased by 48% in the SC group. Cases performed with the SC group had significantly lower total radiation doses (0.8 vs 0.5 mGy) and radiation exposure times (41.9 vs 24.2 seconds). Mean operative times also decreased for the SC group (70 minutes) compared with that for the NoSC group (81 minutes). CONCLUSIONS: A real-time intraoperative radiograph counter was associated with decreased REEs, exposure times, and total radiation doses during ORIF DRFs. Cases performed with a SC had significantly shorter operative times without compromising reduction quality. Using an intraoperative SC counter during cases requiring fluoroscopy may aid in decreasing radiation exposure, which serves as an occupational hazard for hand and upper-extremity surgeons. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic II.

Surgical options for distal radius fractures of type C in elderly patients over 65 years old: a comparison of external fixation with Kirschner wires and volar locking plate.

BACKGROUND: ue to the lack of consensus on the optimal surgical treatment for distal radius fractures (DRF) in elderly patients over 65 years old, the purpose of this study was to compare the efficacy of external fixation (EF) with Kirschner wires and volar locking plate (VLP) in the treatment of DRF through a retrospective cohort study. We hypothesized that there would be no significant difference in overall complications and functional recovery between the two methods. METHODS: We retrospectively analyzed 62 patients over 65 years old who underwent surgical treatment for C-type DRF between 2019 and 2022. Based on the different treatment methods, they were divided into the EF group and the VLP group. General data, inpatient data, and postoperative complications during follow-up were recorded. The X-ray images before surgery, after surgery, and at the last follow-up were analyzed, and the results of wrist motion range, Gartland-Werley wrist joint score, and DASH score were evaluated 6 months after surgery for both groups. RESULT: Thirty patients underwent closed reduction and external fixation combined with Kirschner wire fixation, while 32 underwent open reduction and VLP fixation. The EF group had significantly shorter operation time, intraoperative blood loss, injury-to-surgery time, and hospital stay compared to the VLP group (all p < 0.001). At the last follow-up, the radiographic parameters (ulnar variance and radial inclination) and wrist joint function (wrist dorsiflexion and forearm supination) were better in the VLP group than in the EF group (p = 0.04, p = 0.01, p = 0.001, p = 0.02, respectively). However, there was no significant difference in overall Gartland-Werley wrist joint score, DASH score, and incidence of postoperative complications between the two groups (p = 0.31, p = 0.25, p = 0.47, respectively). CONCLUSION: For patients aged 65 and above with distal radius fractures (DRF) of type C, VLP and external fixation with Kirschner wires yield comparable functional outcome and complications rate at the short term. However, VLP allowed restoration of better radiological parameters.

Outcomes of Volar Plating Distal Radius Fractures Based on Surgical Timing.

BACKGROUND: While complexity of distal radius fractures varies, volar plating is the most prevalent surgical option in adult injuries. The time between date of injury and surgical intervention varies according to several factors, including the timing of presentation and the surgeon's availability. This study aims to understand the impact of a delay in surgical intervention on operative time, patient-reported outcomes, and reoperation rates. METHODS: A retrospective review was performed on patients treated with volar plating of distal radius fractures from 2017 to 2020 at a single institution by multiple surgeons. Perioperative medical records were reviewed. Patients were divided into 2 groups using a cut-off date of surgery performed 12 days after injury. Descriptive analyses were used to compare demographics, fracture characteristics, operative information, and outcome data including postoperative Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) scores and reoperation rates between groups. RESULTS: A total of 257 patients were included. There was no difference in age, gender, smoking status, fracture type, or postoperative QuickDASH scores between groups. Patients fixed at 12 days or more after injury had a higher rate of reoperation, higher American Society of Anesthesiologists scores, and more surgeon experience. CONCLUSIONS: Volar distal radius fixation at 12 or more days after injury had no discernible differences with fracture type, operative time, or tourniquet time; however, a higher rate of reoperation was found in this group compared to earlier intervention. These data may provide important prognostic information that can be used to educate patients who present in a delayed fashion.

Ulnar-Sided Sclerosis of the Lunate Does Not Affect Outcomes in Patients Undergoing Volar Locking Plate Fixation for Distal Radius Fracture.

BACKGROUND AND AIM: Radial shortening after distal radius fracture causes ulnar impaction, and a mild reduction loss of radial height occurs even after volar locking plate fixation. This study aimed to determine whether preoperative ulnar-sided sclerosis affects clinical outcomes after volar locking plate fixation for distal radius fracture (DRF). METHOD: Among 369 patients who underwent volar locking plate fixation for DRF, 18 with preoperative ulnar-sided sclerosis of the lunate were included in Group A and compared to a 1:4 age-, sex- and fracture-pattern-matched cohort without sclerosis (72 patients, Group B). The visual analog scale (VAS), Disabilities of the Arm, Shoulder, and Hand (DASH) score, and grip strength were assessed as clinical outcomes. Ulnar variance (UV), radial inclination, radial length, and volar tilt at two weeks after surgery and the final follow-up were measured as radiographic outcomes. RESULTS: The mean VAS and DASH scores and grip strength did not differ between the two groups. The mean UV at two weeks after surgery and the last follow-up was significantly higher in Group A. The mean changes in UV were +0.62 mm in Group A and +0.48 mm in Group B. There were no significant intergroup differences. Neither UV nor its changes showed any association with DASH and VAS scores. CONCLUSIONS: Preoperative ulnar-sided sclerosis of the lunate did not affect clinical outcomes after volar locking plate fixation, even if UV increased postoperatively.

Management of complex wrist fractures with volar and dorsal locked (double-locked) K-lock.

This article is a technical note to outline a novel technique of fixation in complex, comminuted distal radius fractures using a double-locked K-wire construct using a new implant called K-lock. In these (AO) C-type fractures, with significant dorsal comminution, it is often difficult to attain stable and secure fixation of the dorsal rim fragments, especially the dorsal lunate fossa fragment. This often results in patients being treated by temporary spanning devices or asking to have a restricted use of the hand during a given period to avoid loss of position. If dorsal plating is necessary, because of the severity of the comminution, a double-locked K-wire (locked in both the dorsal and volar plates) offers a fixation option and may create a significantly stronger construct and allow confident early mobilization. The K-lock was recently launched by Newclip Technics as an adjunct to the Xpert Wrist 2.4 set as a fragment-specific fixation option. The wire has less chance of displacing or fracturing the fragment and has a smooth surface compared with a screw; this wire would be safer close to the joint in severe distal intra-articular comminution. Of the 9 cases performed so far (as is our usual practice), despite the complexity of the fractures, none were immobilized postoperatively and all started hand therapy in the first week. Most were driving by 2 weeks and returned to light work at 4 weeks and heavy work or sports at 6 to 8 weeks. This principle of fixation may also be extended to other fractures where dual plating is used.

An isolated rupture of the flexor digitorum tendon of the index finger following volar locking plate fixation of a distal radius fracture: A case report.

Volar locking plates (VLP) have been widely used recently to treat distal radius fractures and are considered the gold standard. One of the most common complications of distal radius fracture surgery is flexor pollicis longus rupture, which may also occur in other tendons. Here, we report a case of isolated rupture of the flexor digitorum profundus to the index finger after VLP fixation of a distal radial fracture. Only a few cases of this have been reported in the literature. In previously reported cases, the cause of tendon rupture was repetitive mechanical stress due to implant protrusion. In our case, the plate was placed too distally; however, soft tissue completely covered the distal part of the plate. There was obvious synovitis within the carpal tunnel; therefore, pressure within the carpal tunnel may have increased. The cause of rupture in our case was thought to be a combination of direct mechanical stress and poor circulation due to inadequate VLP fixation.

Effect of uncertain clinical conditions on the early healing and stability of distal radius fractures.

BACKGROUND AND OBJECTIVES: The healing outcomes of distal radius fracture (DRF) treated with the volar locking plate (VLP) depend on surgical strategies and postoperative rehabilitation. However, the accurate prediction of healing outcomes is challenging due to a range of certainties related to the clinical conditions of DRF patients, including fracture geometry, fixation configuration, and physiological loading. The purpose of this study is to investigate the influence of uncertainty and variability in fracture/fixation parameters on the mechano-biology and biomechanical stability of DRF, using a probabilistic numerical approach based on the results from a series of experimental tests performed in this study. METHODS: Six composite radius sawboneses fitted with titanium VLP (VLP 2.0, Austofix) were loaded to failure at a rate of 2 N/s. The testing results of the elastic and plastic behaviour of the VLP were used as inputs for a probabilistic-based computational model of DRF, which simulated mechano-regulated tissue differentiation and fixation elastic capacity at the fracture site. Finally, the probability of success in early indirect healing and fracture stabilisation was predicted. RESULTS: The titanium VLP is a strong and ductile fixation whose flexibility and elastic capacity are governed by flexion working length and bone-to-plate distance, respectively. A fixation with optimised designs and configurations is critical to mechanically stabilising the early fracture site. Importantly, the uncertainty and variability in fracture/fixation parameters could compromise early DRF healing. The physiological loading uncertainty is the most adverse factor, followed by the negative impact of uncertainty in fracture geometry. CONCLUSIONS: The VRP 2.0 fixation made of grade II titanium is a desirable fixation that is strong enough to resist irreparable deformation during early recovery and is also ductile to deform plastically without implant failure at late rehabilitation.

Risk of Volar Locking Plate Removal After Distal Radius Fractures: Time-to-Event Analysis.

PURPOSE: The primary purpose of this study was to describe the rate of volar locking plate (VLP) removal after distal radius fracture and how long it takes for the risk of VLP removal to stabilize. The secondary purpose was to describe the reasons for VLP removal and analyze the relationship between it and the Soong index. METHODS: This was a single-center retrospective cohort study. Patients aged >18 years with distal radius fracture who underwent VLP fixation were included. Hardware removal, time until VLP removal, and the primary reason for removal were recorded. The implant prominence was measured as described by Soong. We used Kaplan-Meier curves and risk tables to describe the risk of VLP removal and variation over time. Multivariable logistic regression was used to assess the relationship between Soong grade and VLP removal. RESULTS: A total of 313 wrists were included. There were 35 cases of VLP removal, with an overall incidence of 11.2% at 15 years of follow-up. The incidence rate was 1.2 per 100 individuals per year for the entire cohort. The risk of VLP removal decreased from 6.2% in the first postoperative year to 1.7% in the second year and 1.4% in the third year. Beyond that, the rate remained <1% per year throughout the follow-up period. The median hardware removal time was 11 months. The main reasons for VLP removal were tenosynovitis, implant-associated pain, and screw protrusion. We found no association between Soong grade and VLP removal. CONCLUSIONS: Volar locking plate removal after distal radius fracture was more common in the first year after surgery and remained notable until the third year. Regular monitoring and patient education to assess possible complications related to hardware are important during this period. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Questions, answers and challenges: Summarising the guidance for distal radius fractures.

This article summarises the current recommendations from the American Academy of Orthopaedic Surgeons (AAOS), the British Orthopaedic Association (BOA), the British Society for Surgery of the Hand (BSSH) and the National Institute of Health and Care Excellence (NICE) for the management of distal radius fractures (DRF). We performed an audit of DRF management at our local emergency hospital. Results and conclusion: Despite DRF representing a large portion of our workload, there remains a paucity of evidence to base recommendations on. Recommendations can be conflicting, and some seem aspirational rather than achievable. Our local audit highlights the challenges of putting guidelines into practice. Treatment plans should incorporate best practice guidance but ultimately be individualised to each patient.

The Minimum Clinically Important Difference for the Patient-Rated Wrist Evaluation in Surgical Fixation of Distal Radius Fractures: Does Hand Dominance Make a Difference?

BACKGROUND: Distal radius fractures (DRFs) are common orthopaedic injuries. They can be treated in many ways, but the volar locking plate (VLP) is more frequent. Currently, there is limited information regarding the minimum clinically important difference (MCID) in surgically treated DRFs. The purpose of this study was to calculate MCID values for the Patient-Reported Wrist Evaluation (PRWE) in the setting of VLP-treated DRFs. METHODS: A retrospective review was conducted for patients with isolated, surgically-treated DRFs with a VLP. Exclusions included any concomitant procedure other than a carpal tunnel release, skeletal immaturity, polytrauma, open fracture, or missing PRWE data. MCID was calculated using PRWE, an overall health question, and the anchor-based method. RESULTS: A total of 131 patients were identified. Approximately 54.2% injured their dominant hand. AO/OTA classification 23C was the most common (n=89, 67.9%). Average baseline, 6-week, and 12-week PRWE were 71.8 ± 19.6, 34.3 ± 20.1, and 21.2 ± 18.0 respectively. This corresponds to an average change from baseline PRWE at 6 weeks and 12 weeks of -37.5 ± 23.4 and -50.6 ± 22.3, respectively. Average MCID values for 6 weeks and 12 weeks were 43.1 ± 18 and 56.0 ± 20.0, respectively (p<0.001). Hand dominance did not correlate with MCID value (rs = 0.084 at six weeks, rs = 0.099 at 12 weeks). MCID value additionally did not correlate with sex, AO/OTA classification, smoking status, ASA score, or BMI. Treatment at a level 1 trauma center and diagnosis of anxiety and/or depression correlated with a higher 6-week MCID value (rs = 0.308 and rs = 0.410, respectively). Increasing age weakly correlated with higher 12-week MCID value (rs = 0.352). CONCLUSIONS: This study demonstrated an MCID calculation using an overall health anchor. MCID value varied with follow-up time and correlated weakly with age, diagnosis of anxiety and/or depression, and treatment facility, but it did not correlate with injury of the dominant hand. Future research should analyze how to apply MCID and identify successful treatment in the setting of DRF care.

Assessment of Technical Competence in Distal Radius Fracture Fixation by a Volar Locking Plate: A Global Delphi Consensus Study.

PURPOSE: Volar locking plate fixation of distal radius fractures is a common orthopedic procedure and should be mastered by graduating orthopedic residents. Surgical education is transitioning from a traditional time-based approach to competency-based medical education. Valid and objective assessment is essential for successful transition. The purpose of this study was to develop a comprehensive, procedure-specific assessment tool to evaluate technical competence in volar locking plate osteosynthesis of a distal radius fracture. METHODS: International orthopedic/trauma experts involved in resident education participated as panelists in a four-round online Delphi process to reach consensus on the content of the assessment tool. Round 1 was an item-generating round, in which the panelists identified potential assessment parameters. In round 2, the panelists rated the importance of each suggested assessment parameter and reached consensus on which to include in the assessment tool. Round 3 yielded specific assessment score intervals for specific bone and fracture models and is not reported in this study. In round 4, the panelists assigned weights to the assessment parameters on a 1-10 scale to determine how each parameter should have an impact on the overall results. RESULTS: Eighty-seven surgeons, representing 42 countries, participated in the study. Round 1 resulted in 45 assessment parameters, grouped into five procedural steps. After round 2, the number of parameters was reduced to 39. After the final round, an additional parameter was removed and weights were assigned to the remaining parameters. CONCLUSIONS: Using a systematic methodology, a preliminary assessment tool to evaluate technical competence in distal radius fracture fixation was developed. A consensus of international experts supports the content validity of the assessment tool. CLINICAL RELEVANCE: This assessment tool represents the first step in the evidence-based assessment essential for competency-based medical education. Before implementation, further studies exploring validity of variations of the assessment tool in different educational contexts are required.