Enhancing environmental sustainability: Butea monosperma leaves as a key component in WO3-based composites for water purification and therapeutic applications.

In this research, a novel nano-biocomposite material, namely, tungsten trioxide-Butea monosperma leaf powder (WO3@BLP), is an effective and eco-friendly adsorbent used for the mitigation of congo red (CR) and crystal violet (CV) dyes from its aqueous phase. The as-prepared WO3@BLP was characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), DLS analysis, and TGA. Many factors such as solution pH, WO3@BLP dose, temperature, contact time, and initial CR/CV dye concentrations were exploited to monitor the adsorption efficiency of WO3@BLP composites. The biosorption of both CR and CV dyes followed the Langmuir isotherm, with maximum adsorption capacities (qmax) reaching 84.91 mg g-1 for CR at pH 2.3 and 162.75 mg g-1 for CV at pH 8, fitting of kinetics data to the PSO model with closed values of qeexp (mg g-1) and qecal (mg g-1), i.e., 25.69 to 25.38 mg g-1 for CR dye and 29.06 to 29.08 mg g-1 for CV dye. The interaction mechanism behind the adsorption of CR and CV dyes onto the WO3@BLP bionanocomposite includes electrostatic interaction and surface complexation. The synthesized materials were tested for antifungal activity against three different Candida cells, i.e., C. albicans ATCC 90028, C. glabrata ATCC 90030, and C. tropicalis ATCC 750, by using broth dilution method on the minimum inhibiting concentration (MIC). Furthermore, the cytotoxicity of nano-formulated WO3@BLP was studied by in vitro hemolytic assay on a human host. Overall, this research presents a pioneering nano-biocomposite, WO3@BLP, as a sustainable adsorbent for CR and CV dye removal, adhering to Langmuir isotherm and pseudo-second-order kinetics. Its multifaceted approach includes elucidating interaction mechanisms, demonstrating antifungal activity, and assessing cytotoxicity, marking a significant advancement in environmental remediation.

Photocatalytically self-cleaning graphene oxide nanofiltration membranes reinforced with bismuth oxybromide for high-performance water purification.

Graphene oxide (GO) membranes have emerged as promising candidates for water purification applications, owing to their unique physicochemical attributes. Nevertheless, the trade-off between permeability and selectivity, coupled with their vulnerability to membrane fouling, poses significant challenges to their widespread industrial deployment. In this study, we introduce an innovative in-situ growth and layer-by-layer assembly technique for fabricating multilayer GO membranes reinforced with bismuth oxybromide (BiOBr) on commonly employed Nylon substrates. This method allows for the creation of two-dimensional lamellar membranes capable of photocatalytic self-cleaning and tunable nanochannel dimensions. The synthesized GO/BiOBr composite membranes exhibit remarkable water permeance rates (approximately 493.9 LMH/bar) and high molecular rejection efficiency (>99 % for Victoria Blue B and Congo Red dyes). Notably, these membranes showcase an enhanced photocatalytic self-cleaning performance upon exposure to visible light. Our work provides a viable route for the fabrication of functionalized GO-based nanofiltration membranes with BiOBr inclusions, offering a synergistic combination of high water permeability, modifiable nanochannels, and effective self-cleaning capabilities through photocatalysis.

Performance Evaluation of Sinusoidal Power Supplies for Ozone Generation in Water Purification Applications.

Ozone generation is a water disinfection method, superior to chlorine in terms of fewer byproducts and no residual taste. However, its high production cost limits its widespread adoption. This paper designs an ozone generation sinusoidal power supply for water treatment. Ozone generation requires a high-frequency and high-voltage power supply to produce ozone from oxygen molecules. The study evaluates two power supply topologies, one with a parallel LC filter and the other with an LCL filter, assessing their feasibility, effectiveness, and reliability. Theoretically, the LCL filter achieves higher gains than the parallel LC filter. The larger inductance in the parallel LC filter reduces gain, while the larger inductance in the LCL filter increases gain. Simulation and practical results validate these findings, achieving gains of 40 for the parallel LC filter and 150 for the LCL filter.

Polydopamine coating for enhanced electrostatic adsorption of methylene blue by multiwalled carbon nanotubes in alkaline environments.

The removal of dye molecules in alkaline environments is an issue that should receive increased attention. In this study, the interaction mechanism between polydopamine-modified multiwalled carbon nanotubes (P-MWCNTs) and multiwalled carbon nanotubes (MWCNTs) with the cationic dye methylene blue (MB) in alkaline environments was explained in depth by adsorption, spectroscopy, and density functional theory (DFT). The mechanism of action and dominant forces between the adsorbent and adsorbate were analyzed graphically by introducing energy decomposition analysis (EDA) and an independent gradient model (IGM) into the DFT calculations. In addition, the force distribution was investigated through an isosurface. Moreover, batch adsorption studies were conducted to evaluate the performance of MWCNTs and P-MWCNTs for MB removal in alkaline environments. The maximum MB adsorption capacities of the MWCNTs and P-MWCNTs in solution were 113.3 mg‧g-1 and 230.4 mg‧g-1, respectively, at pH 9. The IGM and EDA showed that the better adsorption capacity of the P-MWCNTs originated from the enhancement of the electrostatic effect by the proton dissociation of polydopamine. Moreover, the adsorption of MB by MWCNTs and P-MWCNTs in alkaline environments was governed by dispersion and electrostatic effects, respectively. Through this study, it is hoped that progress will be made in the use of DFT to explore the mechanism of adsorbent-adsorbate interactions.

Phosphorus recovery via struvite crystallization in batch and fluidized-bed reactors: Roles of microplastics and dissolved organic matter.

Struvite crystallization, a promising technology for nutrient recovery from wastewater, is facing considerable challenges due to the presence of emerging contaminants such as microplastics (MPs) ubiquitously found in wastewater. Here, we investigate the roles of MPs and humic acid (HA) in struvite crystallization in batch and fluidized-bed reactors (FBRs) using synthetic and real wastewater with a Mg:N:P molar ratio of 1:3:(1-1.3) at an initial pH of 11. Batch reactor (BR) experiment results show that MPs expedited the nucleation and growth rates of struvite (e.g., the rate of crystal growth in the presence of 30 mg L-1 of polyethylene terephthalate (PET) was 1.43 times higher than that in the blank system), while HA hindered the formation of struvite. X-ray diffraction and the Rietveld refinement analysis revealed that the presence of MPs and HA can result in significant changes in phase compositions of the reclaimed precipitates, with over 80 % purity of struvite found in the precipitates from suspensions in the presence of 30 mg L-1 of MPs. Further characterizations demonstrated that MPs act as seeds of struvite nucleation, spurring the formation of well-defined struvite, while HA favors the formation of newberyite rather than struvite in both reactors. These findings highlight the need for a more comprehensive understanding of the interactions between emerging contaminants and struvite crystallization processes to optimize nutrient recovery strategies for mitigating their adverse impact on the quality and yield of struvite-based fertilizers. ENVIRONMENTAL IMPLICATION: The presence of microplastics in wastewater poses a significant challenge to struvite crystallization for nutrient recovery, as it accelerates nucleation and growth rates of struvite crystals. This can lead to changes in the phase compositions of the reclaimed precipitates, with implications for the quality and yield of struvite-based fertilizers. Additionally, the presence of humic acid hinders the formation of struvite, favoring the formation of other minerals like newberyite. Understanding the interactions between emerging contaminants and struvite crystallization processes is crucial for optimizing nutrient recovery strategies and mitigating the environmental impact of these contaminants on water quality and struvite-based fertilizers.

Low H2O2 consumption Fenton-like catalysts for pollutant cleavage based on the construction of a dual reaction center.

High energy consumption has seriously hindered the development of Fenton-like reactions for the removal of refractory organic pollutants in water. To solve this problem, we designed a novel Fenton-like catalyst (Cu-PAN3) by coprecipitation and carbon thermal reduction. The catalyst exhibits excellent Fenton-like catalytic activity and stability for the degradation of various pollutants with low H2O2 consumption. The experimental results indicate that the dual reaction centers (DRCs) are composed of Cu-N-C and Cu-O-C bridges between copper and graphene-like carbon, which form electron-poor/rich centers on the catalyst surface. H2O2 is mainly reduced at electron-rich Cu centers to free radicals for pollutant degradation. Meanwhile, pollutants can be oxidized by donating electrons to the electron-poor C centers of the catalyst, which inhibits the ineffective decomposition of H2O2 at the electron-poor centers. This therefore significantly reduces the consumption of H2O2 and reduces energy consumption.

Sandwich-structured continuous ZIF-8/Ti3C2 MXene/ZIF-8 for efficient sterilization: Enhanced photocatalytic activity, photothermal effect, and environmental safety.

The development of effective water purification systems is crucial for controlling and remediating environmental pollution, especially in terms of sterilization. Herein, we demonstrate elaborately designed composite nanosheets with a sandwich structure, composed of two-dimensional (2D) Ti3C2 MXene nanosheet core and conformal ZIF-8 ultrathin outer layers, and their potential applications in photocatalytic sterilization. The study results indicate that the conformal ZIF-8-MXene nanosheet exhibits an expanded light absorption range (826 nm), improved photothermal conversion efficiency (6.2 °C s-1), and photocurrent response, thus boosting photocatalytic sterilization efficiency (6.63 log10 CFU mL-1) against Escherichia coli under simulated sunlight within 90 min. Interestingly, 2D ZIF-8 layers exhibit positive zeta potential (19 mV), good hydrophilicity (40.6°), and local photogenerated-hole accumulation, possessing efficient bacteria-trapping efficiency. Membrane filters fabricated from optimized composite nanosheets exhibit an outstanding bacteria-trapping and sterilization efficiency (almost 100 %) against Escherichia coli under simulated sunlight within 30 min of the flow photocatalytic experiments. This work not only presents a rational structural design of the conformal and ultrathin anchoring of ZIF-8 onto a 2D conductive material for bacteria-trapping and sterilization, but also opens new opportunities for using metal-organic frameworks in photocatalytic disinfection of drinking water.

Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal.

The removal of toxic heavy metal ions from water resources is crucial for environmental protection and public health. In this study, we address this challenge by developing a surface functionalization technique for the selective adsorption of these contaminants. Our approach involves atomic layer deposition (ALD) followed by vapor-phase silanization of porous substrates. We utilized porous silica gel powder (∼100 µm particles, 89 m2/g surface area, ∼30 nm pores) as an initial substrate. This powder was first coated with ∼0.5 nm ALD Al2O3, followed by vapor-phase grafting of a thiol-functional silane. The modified powder, particularly in acidic conditions (pH = 4), showed high selectivity in adsorbing Cd(II), As(V), Pb(II), Hg(II), and Cu(II) heavy metal ions in mixed ion solutions over common benign ions (e.g., Na, K, Ca, and Mg). Langmuir adsorption isotherms and breakthrough adsorption studies were conducted to assess heavy metal binding affinity and revealed the order of Cd(II) < Pb(II) < Cu(II) < As(V) < Hg(II), with a significantly higher affinity for As(V) and Hg(II) ions. Time-dependent uptake studies demonstrated rapid removal of heavy metal ions from aqueous environments, with Hg(II) exhibiting the fastest adsorption kinetics on thiol-modified surfaces. These findings highlight the potential of ALD and vapor-phase silanization to create effective adsorbents for the targeted removal of hazardous contaminants from water.

Remediation of Safranin-O and Acid Fuchsin by Using Ti3C2 MXene /rGo-Cu2O Nanocomposite: Preparation, Characterization, Isotherm, Kinetics and Thermodynamic Studies.

In recent years, MXene has become one of the most intriguing two-dimensional layered (2Dl) materials extensively explored for various applications. In this study, a Ti3C2 MXene/rGo-Cu2O Nanocomposite (TGCNCs) was developed to eliminate Safranin-O effectively (SO) and Acid Fuchsin (AF) as cationic dyes from the aquatic environment. Multistep was involved in the preparation of the adsorbent system, including the Preparation of Ti3C2, after that, GO synthesis by the Humer method, followed by rGO production, then added CuSO4 to obtain a final Nanocomposite (NCs) called "TGCNCs". The structure of TGCNCs can be varied in several ways, including FTIR, SEM, TGA, Zeta, EDX, XRD, and BET, to affirm the efficacious preparation of TGCNCs. A novel adsorbent system was developed to remove SO and AF, both cationic dyes. Various adsorption conditions have been optimized through batch adsorption tests, including the pH of the solution (4-12), the effect of dosage (0.003-0.03 g), the impact of the contact time (5-30 min), and the effect of beginning dye concentration (25-250 mg/L). Accordingly, the TGCNCs exhibited excellent fitting for Freundlich isotherm mode, resulting in maximum AF and SO adsorption capacities of 909.09 and 769.23 mg.g-1. This research on adsorption kinetics suggests that a pseudo-second-order (PSO) model would fit well with the experimental data ( = 0.998 and = 0.990). It is evident from the thermodynamic parameters that adsorption is an endothermic process that is spontaneous and favourable. During the adsorption of SO and AF onto NCs, it is hypothesized that these molecules interact intramolecularly through stacking interactions, H-bond interactions, electrostatic interactions, and entrapment within the polymeric Poros structure nanocomposite. Regeneration studies lasting up to five cycles were the most effective for both organic dyes under study.

New Zein Protein Composites with High Performance in Phosphate Removal, Intrinsic Antibacterial, and Drug Delivery Capabilities.

Herein, poly(N-(4-aminophenyl)methacrylamide)-carbon nano-onions [abbreviated as PAPMA-CNOs (f-CNOs)] integrated gallic acid cross-linked zein composite fibers (ZG/f-CNOs) were developed for the removal/recovery of phosphate from wastewater along with controlled drug delivery and intrinsic antibacterial characteristics. The composite fibers were produced by Forcespinning followed by a heat-pressure technique. The obtained ZG/f-CNOs composite fibers presented several favorable characteristics of nanoadsorbents and drug carriers. The composite fibers exhibited excellent adsorption capabilities for phosphate ions. The adsorption assessment demonstrated that composite fibers process highly selective sequestration of phosphate ions from polluted water, even in the presence of competing anions. The ZG/f-CNOs composite fibers presented a maximum phosphate adsorption capacity (qmax) of 2500 mg/g at pH 7.0. This represents the most efficient phosphate adsorption system among all of the reported nanocomposites to date. The isotherm studies and adsorption kinetics of the adsorbent showed that the adsorption experiments followed the pseudo-second-order and Langmuir isotherm model (R2 = 0.9999). After 13 adsorption/desorption cycles, the adsorbent could still maintain its adsorption efficiency of 96-98% at pH 7.0 while maintaining stability under thermal and chemical conditions. The results mark significant progress in the design of composite fibers for removing phosphates from wastewater, potentially aiding in alleviating eutrophication effects. Owing to the f-CNOs incorporation, ZG/f-CNOs composite fibers exhibited controlled drug delivery. An antibiotic azithromycin drug-encapsulated composite fibers presented a pH-mediated drug release in a controlled manner over 18 days. Furthermore, the composite fibers displayed excellent antibacterial efficiency against Gram-positive and Gram-negative bacteria without causing resistance. In addition, zein composite fibers showed augmented mechanical properties due to the presence of f-CNOs within the zein matrix. Nonetheless, the robust zein composite fibers with inherent stimuli-responsive drug delivery, antibacterial properties, and phosphate adsorption properties can be considered promising multifunctional composites for biomedical applications and environmental remediation.

Magnetic bio-composite based on zirconium and chitosan modified activated carbon from peanut husk with enhanced antibacterial and adsorptive potential for alizarin red and congo red in wastewater.

Creating new adsorbents is crucial for removing contaminants from water due to increased industrialization, which has worsened water pollution in recent years. In this study, a magnetic biocomposite, Zirconium (Zr)-doped chitosan (CS)-coated iron oxide nanoparticles (Fe3O4-NPs)-peanut husk (PH)-based activated carbon (AC) (Zr-CS/Fe3O4-NPs@PH-AC), was synthesized for efficient removal of alizarin red (AR) and congo red (CR) dyes, alongside antibacterial applications. Characterization via scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis revealed micropores and mesopores development due to chemical activation of PH biomaterial and Fe3O4-NPs addition. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) identified functional groups and structural properties. Vibrating sample magnetometry (VSM) analyzed magnetic properties. Optimal conditions for AR/CR removal were determined, including Zr-CS/Fe3O4-NPs@PH-AC dose, dye dose, contact time, and temperature, achieving maximum removal percentages. Experimentally determined maximum adsorption capacities for AR and CR were 374.3 and 154.1 mg·g-1, respectively. Cytotoxicity studies affirmed the eco-friendly and non-toxic nature of the adsorbent by exhibiting the reduction in the cell viability from 100 % to 88.68 % from the 0 to 200 µg·L-1 respectively. Additionally, the biocomposite exhibited significant antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) due to magnetic NPs. The material in this study shows extreme compatibility for numerous applications.

Antifouling Asymmetric Block Copolymer Nanofilms via Freestanding Interfacial Polymerization for Efficient and Sustainable Water Purification.

Membrane materials that resist nonspecific or specific adsorption are urgently required in widespread applications. In water purification, inevitable membrane fouling not only limits separation performance, but also remarkably increases operation requirements, and augments extra maintenance costs and higher energy consumption. In this work, we report a freestanding interfacial polymerization (IP) fabrication strategy for in-situ creation of asymmetric block copolymer (BCP) nanofilms with antifouling properties, greatly outperforming the conventional surface post-modification approaches. The resultant asymmetric BCP nanofilms with highly-dense, highly-hydrophilic polyethylene glycol (PEG) brushes, can be readily formed via a typical IP process of a double-hydrophilic BCP composed of an antifouling PEG block and a membrane-forming multiamine block. The asymmetric BCP nanofilms have been applied for efficient and sustainable natural water purification, demonstrating extraordinary antifouling capabilities accompanied with superior separation performance far beyond commercial polyamide nanofiltration membranes. The antifouling behaviors of BCP nanofilms derived from the combined effect of the hydration layer, electrostatic repulsion and steric hindrance were further elucidated by water flux and fouling resistance in combination with all-atom molecular dynamics simulation. This work opens up a new avenue for large-scale and low-cost creation of broad-spectrum, asymmetric membrane materials with diverse functional "defect-free" surfaces in real-world applications.

Application of catalytic technology based on the piezoelectric effect in wastewater purification.

The demands of human life and industrial activities result in a significant influx of toxic contaminants into aquatic ecosystems. In particular, organic pollutants such as antibiotics and dye molecules, bacteria, and heavy metal ions are represented, posing a severe risk to the health and continued existence of living organisms. The method of removing pollutants from water bodies by utilizing the principle of the piezoelectric effect in combination with chemical catalytic processes is superior to other wastewater purification technologies because it can collect water energy, mechanical energy, etc. to achieve cleanliness and high removal efficiency. Herein, we briefly introduced the piezoelectric mechanisms and then reviewed the latest advances in the design and synthesis of piezoelectric materials, followed by a summary of applications based on the principle of piezoelectric effect to degrade pollutants in water for wastewater purification. Moreover, water purification technologies incorporating the piezoelectric effect, including piezoelectric effect-assisted membrane filtration, activation of persulfate, and battery electrocatalysis are elaborated. Finally, future challenges and research directions for the piezoelectric effect are proposed.

Removal of endocrine disruptors and pharmaceuticals by graphene oxide-based membranes in water: A review.

Membrane-based water treatment has emerged as a promising solution to address global water challenges. Graphene oxide (GO) has been successfully employed in membrane filtration processes owing to its reversible properties, large-scale production potential, layer-to-layer stacking, great oxygen-based functional groups, and unique physicochemical characteristics, including the creation of nano-channels. This review evaluates the separation performance of various GO-based membranes, manufactured by coating or interfacial polymerization with different support layers such as polymer, metal, and ceramic, for endocrine-disrupting compounds (EDCs) and pharmaceutically active compounds (PhACs). In most studies, the addition of GO significantly improved the removal efficiency, flux, porosity, hydrophilicity, stability, mechanical strength, and antifouling performance compared to pristine membranes. The key mechanisms involved in contaminant removal included size exclusion, electrostatic exclusion, and adsorption. These mechanisms could be ascribed to the physicochemical properties of compounds, such as molecular size and shape, hydrophilicity, and charge state. Therefore, understanding the removal mechanisms based on compound characteristics and appropriately adjusting the operational conditions are crucial keys to membrane separation. Future research directions should explore the characteristics of the combination of GO derivatives with various support layers, by tailoring diverse operating conditions and compounds for effective removal of EDCs and PhACs. This is expected to accelerate the development of surface modification strategies for enhanced contaminant removal.

Development and implementation of a novel mechanized planting method for ecological restoration of aquatic environments using degradable nutrition pots.

Submerged plants play a significant role in the remediation and purification of polluted water bodies. Reconstruction of submerged plants has been considered as an important ecological method to restore aquatic ecosystems. However, large-scale and efficient plantation of submerged plants in water restoration is a huge challenge. This paper proposes a novel mechanized planting method for submerged plants utilizing nutrition pots as planting units. Firstly, the details of the mechanized planting method were introduced. The mechanized planting method involves pre-planting the reproductive bodies of submerged plants in degradable nutrition pots, and then implanting them into the underwater soil through a planting device. Secondly, the interaction force between the nutrition pot and the soil was measured. It was found that the implantation force of nutrition pots increases with planting velocity. The planting force shows a significant increase trend when the water content in the soil decreases. Thirdly, the deformation of the nutrition pot was studied through simulations. It was discovered that the deformation of the nutrition pot mainly occurs at the bottom and the side walls near the bottom, and the limited deformation ensures the integrity of the nutrition pot. Finally, a planting device with a linear motion mechanism was designed, and a typical submerged plant, Vallisneria natans was tested, using agricultural paper seedling containers as the nutrition pots. It was demonstrated that the mechanized device successfully planted submerged plant nutrition pots into the soil, and the submerged plants survived and showed a clear growth trend. The mechanized planting method of submerged plants proposed in this article is expected to provide a new and friendly technology for ecological restoration of water source.

Sustainable chitosan-based materials as heterogeneous catalyst for application in wastewater treatment and water purification: An up-to-date review.

Water pollution is one of serious environmental issues due to the rapid development of industrial and agricultural sectors, and clean water resources have been receiving increasing attention. Recently, more and more studies have witnessed significant development of catalysts (metal oxides, metal sulfides, metal-organic frameworks, zero-valent metal, etc.) for wastewater treatment and water purification. Sustainable and clean catalysts immobilized into chitosan-based materials (Cat@CSbMs) are considered one of the most appealing subclasses of functional materials due to their high catalytic activity, high adsorption capacities, non-toxicity and relative stability. This review provides a summary of various upgrading renewable Cat@CSbMs (such as cocatalyst, photocatalyst, and Fenton-like reagent, etc.). As for engineering applications, further researches of Cat@CSbMs should focus on treating complex wastewater containing both heavy metals and organic pollutants, as well as developing continuous flow treatment methods for industrial wastewater using Cat@CSbMs. In conclusion, this review abridges the gap between different approaches for upgrading renewable and clean Cat@CSbMs and their future applications. This will contribute to the development of cleaner and sustainable Cat@CSbMs for wastewater treatment and water purification.

Surface Microstructure Drives Biofilm Formation and Biofouling of Graphene Oxide Membranes in Practical Water Treatment.

Significant progress has been made previously in the research and development of graphene oxide (GO) membranes for water purification, but their biofouling behavior remains poorly understood. In this study, we investigated the biofilm formation and biofouling of GO membranes with different surface microstructures in the context of filtering natural surface water and for an extended operation period (110 days). The results showed that the relatively hydrophilic and smooth Fe(OH)3/GO membrane shaped a thin and spatially heterogeneous biofilm with high stable flux. However, the ability to simultaneously mitigate biofilm formation and reduce biofouling was not observed in the weakly hydrophilic and wrinkled Fe/GO and H-Fe(OH)3/GO membranes. Microbial analyses revealed that the hydrophilicity and roughness distinguished the bacterial communities and metabolic functions. The organic matter-degrading and predatory bacteria were more adapted to hydrophilic and smooth GO surfaces. These functional taxa were involved in the degradation of extracellular polymeric substances (EPS), and improved biofilm heterogeneity. In contrast, the weakly hydrophilic and wrinkled GO surfaces had reduced biodiversity, while unexpectedly boosting the proliferation of EPS-secreting bacteria, resulting in increased biofilm formation and aggravated biofouling. Moreover, all GO membranes achieved sustainable water purification during the entire operating period.

Spatially Confined Radical Addition Reaction for Electrochemical Synthesis of Carboxylated Graphene and its Applications in Water Desalination and Splitting.

Due to the chemical stability of graphene, synthesis of carboxylated graphene still remains challenging during the electrochemical exfoliation of graphite. In this work, a spatially confined radical addition reaction which occurs in the sub-nanometer scaled interlayers of the expanded graphene sheets for the electrochemical synthesis of highly stable carboxylated graphene is reported. Here, formate anions act as both intercalation ions and co-reactant acid for the confinement of electro-generated carboxylic radical (●COOH) in the sub-nanometer scaled interlayers, which facilitates the radical addition reaction on graphene sheets. The controllable carboxylation of graphene is realized by tuning the concentration of formate anions in the electrolyte solution. The high crystallinity of the obtained product indicates the occurrence of spatially confined ●COOH addition reaction between the sub-nanometer interlayers of expanded graphite. In addition, the carboxylated graphene have been used for water desalination and hydrogen/oxygen reduction reaction. Therefore, this work provides a new method for the in situ preparation of functionalized graphene through the electrolysis and its applications in water desalination and hydrogen/oxygen reduction reactions.

Enhancing the coagulation process for the removal of microplastics from water by anionic polyacrylamide and natural-based Moringaoleifera.

The existence of microplastics (MPs) in water is a significant global concern since they have the potential to pose a threat to human health. Therefore, there is a need to develop a sustainable treatment technology for MPs removal, as the conventional methods are inadequate to address this problem. Coagulation is a typical process in treatment plants that can capture MPs before releasing them into the environment. In this work, the removal behaviors of polyamide (PA), polystyrene (PS), and polyethylene (PE) MPs were systematically investigated through coagulation processes using aluminum sulfate (Al2(SO4)3) and Moringa oleifera (MO) seeds extract. Subsequently, the coagulation performance of Al2(SO4)3 was improved by the separate addition of anionic polyacrylamide (APAM) and naturally derived MO. Results showed that Al2(SO4)3 in combination with APAM had better performance than Al2(SO4)3 or MO alone. In the Al2(SO4)3+APAM system, the removal efficiencies were 93.47%, 81.25%, and 29.48% for PA, PS, and PE MPs, respectively. Furthermore, the effectiveness of the Al2(SO4)3 and MO blended system was approximately similar to the Al2(SO4)3+APAM system. However, the required amount of Al2(SO4)3 was decreased to 50% in the Al2(SO4)3+MO system compared to the optimal dosage in the Al2(SO4)3 system alone. The combination of 40 mg/L of Al2(SO4)3 and 60 mg/L of MO resulted in removal efficiencies of 92.99%, 80.48%, and 28.94% for PA, PS, and PE MPs, respectively. The high efficacy of these enhanced methods was due to the synergic effects of charge neutralization and agglomeration adsorption, which were validated through zeta potential assessments and visual analysis using scanning electron microscopy (SEM) images. In the case of experimental conditions, initial pH had little impact on removal efficiency, while NaCl salinity and stirring speed directly affected MPs removal. Consequently, this research took a step toward finding a green strategy to remove MPs from water systems.