Diversidad de ninfas de Leptohyphidae (Ephemeroptera) en el río Quenane-Quenanito, piedemonte llanero colombiano / Diversity of Leptohyphidae (Ephemeroptera) nymphs in the Quenane-Quenanito river, Colombian plain foothills

Resumen Introducción: Varias presiones antrópicas sufren los ecosistemas acuáticos del piedemonte llanero en Colombia. La respuesta a estresores ambientales aún se desconoce en organismos bioindicadores como Leptohyphidae. Objetivo: Determinar la diversidad de ninfas de Leptohyphidae del río Quenane-Quenanito, en dos periodos hidrológicos contrastantes y su relación con algunas variables fisicoquímicas. Métodos: En diciembre (2014) y febrero (2015) se recolectaron organismos con red Surber en seis estaciones a lo largo del río. Se analizó la diversidad alfa y beta y se aplicó análisis de redundancia y modelos lineales generalizados con el fin de establecer la relación entre los taxones y las variables ambientales. Resultados: Se identificaron 369 organismos pertenecientes a cuatro géneros (Amanahyphes, Traverhyphes, Tricorythopsis y Tricorythodes), dos especies y ocho morfoespecies. Se reporta por primera vez para el departamento del Meta Amanahyphes saguassu. Se registró la mayor diversidad de ninfas en la transición a la sequía y la mayor abundancia en sequía. La diversidad beta señaló que la configuración del ensamblaje cambia a nivel espacial y temporal. Conclusiones: Los organismos de Leptohyphidae prefieren hábitats de corrientes, particularmente en el periodo de sequía, donde hallan alimento (hojarasca, detritos) y refugio para establecerse exitosamente; actividades antrópicas como la urbanización afectan notablemente la diversidad. La alta diversidad registrada en este pequeño río de piedemonte llanero refleja la necesidad de incrementar este tipo de trabajos y esfuerzos de recolección de material de estudio en la región.

Abstract Introduction: Various anthropic pressures affect the aquatic ecosystems of the foothills of Colombia. The response to environmental stressors is still unknown in bioindicator organisms such as Leptohyphidae. Objective: To determine the diversity of Leptohyphidae nymphs of the Quenane-Quenanito river, in two contrasting hydrological periods and its relationship with some physicochemical variables. Methods: In December (2014) and February (2015), organisms were collected with a Surber net at six stations along the current. Alpha and beta diversity was analyzed and redundancy analysis and generalized linear model were applied to establish the relationship between taxa and environmental variables. Results: Were identified 369 organisms belonging to four genera (Amanahyphes, Traverhyphes, Tricorythopsis, and Tricorythodes), two species, and eight morphospecies. Amanahyphes saguassu is reported for the first time for the Meta department. High diversity of Leptohyphidae nymphs was recorded in the transition to drought season and greater abundance in drought. Beta diversity indicated that the configuration of the assemblage changes spatially and temporally. Conclusions: Leptohyphidae organisms prefer fast habitats, particularly in the dry period where they find food (leaf litter, detritus) and shelter to establish themselves successfully; anthropic activities such as urbanization notably affect diversity. The high diversity recorded in this small river in the foothills of the plains reflects the need to increase this type of works and collection efforts of study material in the region.

Single Atom Ag Bonding Between PF3T Nanocluster and TiO2 Leads the Ultra-Stable Visible-Light-Driven Photocatalytic H2 Production.

Atomic Ag cluster bonding is employed to reinforce the interface between PF3T nano-cluster and TiO2 nanoparticle. With an optimized Ag loading (Ag/TiO2 = 0.5 wt%), the Ag atoms will uniformly disperse on TiO2 thus generating a high density of intermediate states in the band gap to form the electron channel between the terthiophene group of PF3T and the TiO2 in the hybrid composite (denoted as T@Ag05-P). The former expands the photon absorption band width and the latter facilitates the core-hole splitting by injecting the photon excited electron (from the excitons in PF3T) into the conduction band (CB) of TiO2. These characteristics enable the high efficiency of H2 production to 16 580 µmol h-1 g-1 and photocatalysis stability without degradation under visible light exposure for 96 h. Compared to that of hybrid material without Ag bonding (TiO2@PF3T), the H2 production yield and stability are improved by 4.1 and 18.2-fold which shows the best performance among existing materials in similar component combination and interfacial reinforcement. The unique bonding method offers a new prospect to accelerate the development of photocatalytic hydrogen production technologies.

Dimerization of Full-length Aß -42 Peptide: A Comparison of Different Force Fields and Water Models.

Among the two isoforms of amyloid- i.e., Aß-40 and Aß-42, Aß-42 is more toxic due to its increased aggregation propensity. The oligomerization pathways of amyloid-ß may be investigated by studying its dimerization process at an atomic level. Intrinsically disordered proteins (IDPs) lack well-defined structures and are associated with numerous neurodegenerative disorders. Molecular dynamics simulations of these proteins are often limited by the choice of parameters due to inconsistencies in the empirically developed protein force fields and water models. To evaluate the accuracy of recently developed force fields for IDPs, we study the dimerization of full-length Aß-42 in aqueous solution with three different combinations of AMBER force field parameters and water models such as ff14SB/TIP3P, ff19SB/OPC, and ff19SB/TIP3P using classical MD and Umbrella Sampling method. This work may be used as a benchmark to compare the performance of different force fields for the simulations of IDPs.

Dual Hole Transport Layers Heterojunction and Band Alignment Engineered Mo:BiVO4 Photoanodes for Efficient Water Splitting.

BiVO4-based photoanode is one of the most promising photoanodes for photoelectrocatalytic water splitting. However, the serious problem of interface charge recombination limits its further development. Here, a Mo:BiVO4/NiOx/CPF-TCzB/NiCoBi photoanode is constructed with double hole transport layer and an energy level gradient to achieve an effective photo-generated holes extraction and accumulation at the surface electrocatalyst. The conjugated polycarbazole framework CPF-TCzB is used as hole transport layer to eliminate the charge recombination center between Mo:BiVO4 and NiCoBi electrocatalyst and realize the extraction and storage of photo-generated hole; NiOx nanoparticles are further inserted between Mo:BiVO4 and CPF-TCzB to form a gradient energy level, eliminating the energy level barrier and optimizing band alignment. As a result, Mo:BiVO4/NiOx/CPF-TCzB/NiCoBi achieves a much higher photocurrent densities of 3.14 mA cm-2 than that of Mo:BiVO4 (0.42 mA cm-2) at 0.6 V versus RHE. This work provides an specific way to adjust the band structure of BiVO4-based photoanodes and realize efficient hole extraction and storage for PEC water splitting.

Statistical physical modeling insights for urinary analgesic drug adsorption on carbon nanomaterial derivative.

The presence of phenazopyridine in water is an environmental problem that can cause damage to human health and the environment. However, few studies have reported the adsorption of this emerging contaminant from aqueous matrices. Furthermore, existing research explored only conventional modeling to describe the adsorption phenomenon without understanding the behavior at the molecular level. Herein, the statistical physical modeling of phenazopyridine adsorption into graphene oxide is reported. Steric, energetic, and thermodynamic interpretations were used to describe the phenomenon that controls drug adsorption. The equilibrium data were fitted by mono, double, and multi-layer models, considering factors such as the numbers of phenazopyridine molecules by adsorption sites, density of receptor sites, and half saturation concentration. Furthermore, the statistical physical approach also calculated the thermodynamic parameters (free enthalpy, internal energy, Gibbs free energy, and entropy). The maximum adsorption capacity at the equilibrium was reached at 298 K (510.94 mg g-1). The results showed the physical meaning of adsorption, indicating that the adsorption occurs in multiple layers. The temperature affected the density of receptor sites and half saturation concentration. At the same time, the adsorbed species assumes different positions on the adsorbent surface as a function of the increase in the temperature. Meanwhile, the thermodynamic functions revealed increased entropy with the temperature and the equilibrium concentration.

A Functional Switch Between Asperfumene and Fusicoccadiene Synthase and Entrance to Asperfumene Biosynthesis through a Vicinal Deprotonation-Reprotonation Process.

The diterpene synthase AfAS was identified from Aspergillus fumigatiaffinis. Its amino acid sequence and - according to a structural model - active site architecture are highly similar to those of the fusicocca-2,10(14)-diene synthase PaFS, but AfAS produces a structurally much more complex diterpene with a novel 6-5-5-5 tetracyclic skeleton called asperfumene. The cyclisation mechanism of AfAS was elucidated through isotopic labelling experiments and DFT calculations. The reaction cascade proceeds in its initial steps through similar intermediates as for the PaFS cascade, but then diverges through an unusual vicinal deprotonation-reprotonation process that triggers a skeletal rearrangement at the entrance to the steps leading to the unique asperfumene skeleton. The structural model revealed only one major difference between the active sites: The PaFS residue F65 is substituted by I65 in AfAS. Intriguingly, site-directed mutagenesis experiments with both diterpene synthases revealed that position 65 serves as a bidirectional functional switch for the biosynthesis of tetracyclic asperfumene versus structurally less complex diterpenes.

Groundwater quality assessment using machine learning models: a comprehensive study on the industrial corridor of a semi-arid region.

Water plays a significant role in sustaining the lives of humans and other living organisms. Groundwater quality analysis has become inevitable, because of increased contamination of water resources and global warming. This study used machine learning (ML) models to predict the water quality index (WQI) and water quality classification (WQC). Forty groundwater samples were collected near the Ranipet industrial corridor, and the hydrogeochemistry and heavy metal contamination were analyzed. WQC prediction employed random forest (RF), gradient boosting (GB), decision tree (DT), and K-nearest neighbor (KNN) models, and WQI prediction used extreme gradient boosting (XGBoost), support vector regressor (SVR), RF, and multi-layer perceptron (MLP) models. The grid search method is used to evaluate the ML model by F1 score, accuracy, recall, precision, and Matthews correlation coefficient (MCC) for WQC and the coefficient of determination (R2), mean absolute error (MAE), mean square error (MSE), and median absolute percentage error (MAPE) for WQI. The WQI results indicate that the groundwater quality of the study area is very poor and unsuitable for drinking or irrigation purposes. The performance metrics of the RF model excelled in predicting both WQC (accuracy = 97%) and WQI (R2 = 91.0%), outperforming other models and emphasizing ML's superiority in groundwater quality assessment. The findings suggest that ML models perform well and yield better accuracy than conventional techniques used in groundwater quality assessment studies.

An integrated approach through controlled experiment and LCIA to evaluate water quality and ecological impacts of irrigated paddy rice.

This study used an integrated approach to mainly assess the water quality of paddy field during cultivation and quantify its equivalent ecological damages. Accordingly, an isolated pilot area with 0.6 ha and subsurface drainage pipes was prepared for flow measurement and multiple pollutant examination (DO, EC, pH, COD, TKN, TN, TP, NO3, butachlor) under controlled condition during 94 days of rice cultivation. Based on life cycle impact assessment (LCIA) database, the indices of ReCiPe (2016) were used to convert the examined nutrient and herbicide pollution. Results showed that TKN and TP were significant pollutants and reached the maximum concentrations of 7.2 and 4.9 mg/L in pilot outflow, respectively. Here, their average discharged loads were 56.2 gN/day and 45.3 gP/day. These loads equal leaching 8.5% and 9.4% of applied urea and phosphate fertilizers, respectively. The nutrient export coefficients were 8.4 kgN/ha and 6.8 kgP/ha. Nevertheless, the majority of this pollution was transferred by inflow. The net export coefficients were 0.3 kgN/ha and 2.6 kgP/ha while net leaching rates were 0.3%TN and 3.3%TP. The trend of combined ecological damages also showed that the 11-17th day of cultivation imposed the highest ecological risks. The state-of-the-art index of ecological footprint per food production estimates the equivalent ratio of lost lives by impaired ecosystem against lives saved from starvation. This index showed that 7% of the potential of produced paddy rice in this area for saving lives would be spoiled by releasing pollution to the terrestrial ecosystem in the long term. Yet, it can be enhanced as a matter of direct discharge to the freshwater. Therefore, using suitable agricultural operations or improving farm management practices for pollution abatement or assimilation potential is highly recommended.

Balancing aquaculture and estuarine ecosystems: machine learning-based water quality indices for effective management.

This study delves into the environmental impact of inland aquaculture on estuarine ecosystems by examining the water quality of four estuarine streams within the key inland aquaculture zone of South India. In this region, extensive and intensive aquaculture practices are common, posing potential challenges to estuarine health. The research explores the predictive capabilities of the Gaussian elimination method (GEM) and machine learning techniques, specifically multi-linear regression (MLR) and support vector regressor (SVR), in forecasting the water quality index of these streams. Through comprehensive evaluation using performance metrics such as coefficient of determination (R2) and average mean absolute percentage error (MAPE), MLR and SVR demonstrate higher prediction efficiency. Notably, employing key water parameters as inputs in machine learning models is also more effective. Biochemical oxygen demand (BOD) emerges as a critical water parameter, identified by both MLR and SVR, exhibiting high specificity in predicting water quality. This suggests that MLR and SVR, incorporating key water parameters, should be prioritized for future water quality monitoring in intensive aquaculture zones, facilitating timely warnings and interventions to safeguard water quality.

Satellite-based rainwater harvesting sites assessment for Dera Ghazi Khan, Punjab, Pakistan.

Water scarcity in arid regions poses significant livelihood challenges and necessitates proactive measures such as rainwater harvesting (RWH) systems. This study focuses on identifying RWH sites in Dera Ghazi Khan (DG Khan) district, which recently experienced severe water shortages. Given the difficulty of large-scale ground surveys, satellite remote sensing data and Geographic Information System (GIS) techniques were utilized. The Analytic Hierarchy Process (AHP) approach was employed for site selection, considering various criteria, including land use/land cover, precipitation, geological features, slope, and drainage. Landsat 8 OLI imagery, GPM satellite precipitation data, soil maps, and SRTM DEM were key inputs. Integrating these data layers in GIS facilitated the production of an RWH potential map for the region. The study identified 9 RWH check dams, 12 farm ponds, and 17 percolation tanks as suitable for mitigating water scarcity, particularly for irrigation and livestock consumption during dry periods. The research region was classified into four RWH zones based on suitability, with 9% deemed Very Good, 33% Good, 53% Poor, and 5% Very Poor for RWH projects. The generated suitability map is a valuable tool for hydrologists, decision-makers, and stakeholders in identifying RWH potential in arid regions, thereby ensuring water reliability, efficiency, and socio-economic considerations.

Prolonged water-only fasting in the management of low-grade follicular lymphoma: a case series.

BACKGROUND: Follicular lymphoma typically follows an indolent and relapsing course often requiring several treatment cycles to achieve remission. Some patients opt to use complementary and alternative therapies particularly when observation is a treatment option. CASE PRESENTATION: Here we present a case series of three patients, a 50-year-old, White, Hispanic female, 56-year-old, White, non-Hispanic male, and 49-year-old, White, non-Hispanic male, who elected to undergo one or more prolonged water-only fasting and refeeding interventions to manage low to intermediate grade follicular lymphoma. Fasting was well tolerated in each patient. Each patient also experienced a reduction in the size and avidity of hypermetabolic lymph nodes as independently determined by their respective oncologists. CONCLUSION: The reported cases demonstrate positive outcomes in low-grade follicular lymphoma coinciding with prolonged water-only fasting and exclusively whole-plant-food dietary interventions. These findings highlight the potential of such interventions and warrant further exploration through preliminary observational research.

Monitoring iohexol and its transformation products as evidence of reclaimed water irrigation input to contiguous waterbodies.

Irrigation with reclaimed water alleviates water supply shortages, but excess application often results in impairment of contiguous waterbodies. This project investigated the potential use of iohexol, an iodinated contrast media used in medical imaging, together with its bio- and phototransformation products as unique reconnaissance markers of reclaimed water irrigation intrusion at three golf courses within the state of Florida. Inter-facility iohexol concentrations measured in reclaimed waters ranged over ~2 orders of magnitude while observed intra-facility seasonal differences were ≤1 order of magnitude. A ~50 % reduction in iohexol was observed post-disinfection for reclaimed water facilities utilizing UV light while none was observed with use of chlorine. Iohexol biotransformation products were observed to decline or shift to lower molecular weight compounds when exposed to UV light but not during disinfection using chlorine. Iohexol biotransformation products were observed in most of the samples but were more prevalent in samples collected during the dry season. Much fewer iohexol phototransformation products were observed in chlorinated reclaimed water, and they were only observed in UV light irradiated reclaimed water when the pre-disinfectant iohexol concentration was ≥5000 ng/L or from solar exposure of reclaimed water spiked with 10 µM of iohexol. For the Hillsborough golf course overlaying an aquifer, the groundwater did not contain iohexol or phototransformation products but did contain biotransformation products. It is not known if these biotransformation products are from active or historical intrusion. The additional presence of sucralose in the aquifer suggests that intrusion has occurred within the past 3 years. This study demonstrates three crucial points in attempting to utilize iohexol to denote reclaimed water intrusion from irrigation overapplication: (1) interpretable results are obtained when iohexol concentrations in the reclaimed water employed for irrigation are ≥1000 ng/L, with higher concentrations in the range of ≥5000 ng/L better able to meet analytical sensitivity requirements after further dilution or degradation in the environment; (2) it is beneficial to assess iohexol transformation products in tandem with iohexol monitoring to account for environmental transformations of iohexol during storage and transport to the receiving water of concern; and (3) inclusion of monitoring for sucralose, an artificial sweetener ubiquitous in wastewater sources that is comparatively stable in the environment, can aid in interpretating whether reclaimed water intrusion based on identification of iohexol and transformation products in the receiving water is attributable to historic or ongoing irrigation overapplications.

Multi-method characterization of groundwater nitrate and sulfate contamination by karst mines in southwest China.

Groundwater contamination by nitrate and sulfate in mining areas is a significant challenge. Consequently, the inputs sources of these contaminants and their evolution have received considerable attention, with the knowledge gained critical for improved management of water quality. This study integrated data on multiple stable isotopes and water chemistry data and a Bayesian isotope mixing model to investigate the relative contributions of inputs sources of sulfate and nitrate sources to bodies of water in a karst mining area in southwest China. The outcomes indicated that hydrochemical component in the water bodies of the study area is mainly derived from the dissolution of silicate rocks, carbonate rocks and sulfate minerals as well as the oxidation of sulfides. The human and agricultural wastewater, soil nitrogen, and fertilizers were the predominant inputs sources of nitrate to the mine water environment; the predominant inputs sources of sulfide were mineral oxidation, evaporite dissolution, atmospheric deposition, and sewage. Groundwater is mainly recharged from atmospheric precipitation, and surface water is closely hydraulically connected to groundwater. Nitrogen and oxygen isotope composition and water chemistry indicative of nitrification dominate the nitrogen cycle in the study area. The oxidation of pyrite and bacterial sulfate reduction (SRB) had no significant impact on the stable isotopes of groundwater. The results of this study demonstrate the inputs of different sources to nitrate and sulfate in karst mines and associated transformation processes. The results of this study can assist in the conservation of groundwater quality in mining areas and can act as a reference for future related studies.

Rapid eco-friendly selective dye removal using modified chitosan-based sponges: Synthesis, characterization, and application.

The ongoing challenge of water scarcity persists alongside a concerning rise in water pollution driven by population expansion and industrial development. As a result, urgent measures are imperative to address the pressing need for a clean and sustainable water supply. In this study, a sustainable and green approach was utilized to prepare four chitosan-based sponges from a chemically modified chitosan with different alkyl chains in aqueous medium and at room temperature. The resulting sponges displayed excellent stability in water with outstanding dye removal efficiency. The adsorption capacity was associated with the alkyl chain length incorporated to the polymer backbone. All sponges displayed a high adsorption capacity of methyl orange (MO) ranges between 238 and 380 mg g-1, while a low capacity were obtained for methylene blue (MB) and Rhodamine B (RB). Competitive adsorption experiments were conducted on binary and ternary mixtures to assess the selective removal of MO from a mixture of dyes in which the separation factor was found to be ranging between 1.6 and 32. The adsorption kinetics isotherms of all sponges followed the pseudo-second-order, and the Langmuir model was found to be more suitable than the Freundlich for the adsorption of MO on the sponges. The chitosan-based sponges showed stable performance, robustness and reusability over 5 adsorption-desorption cycles, indicating their great potential for water treatment applications.

Tardigrade distribution in soils of high Arctic habitats.

Tardigrades are omnipresent microfauna with scarce record on their ecology in soils. Here, we investigated soil inhabiting tardigrade communities in five contrasting polar habitats, evaluating their abundance, diversity, species richness, and species composition. Moreover, we measured selected soil physico-chemical properties to find the drivers of tardigrade distribution among these habitats. In spite of reported tardigrade viability in extreme conditions, glacier forelands represented a habitat almost devoid of tardigrades. Even dry and wet tundra with soil developing for over more than 10 000 years held low abundances compared to usual numbers of tardigrades in temperate habitats. Polar habitats also differ in species composition, with Diaforobiotus islandicus being typical species for dry and Hypsibius exemplaris for wet tundra. Overall, tardigrade abundance was affected by the content of nutrients as well as physical properties of soil, i.e. content of total nitrogen (TN), total organic carbon (TOC), stoniness, soil texture and the water holding capacity (WHC). While diversity and species composition were significantly related to soil physical properties such as the bulk density (BD), soil texture, stoniness, and WHC. Physical structure of environment was, therefore, an important predictor of tardigrade distribution in polar habitats. Since many studies failed to identify significant determinants of tardigrade distribution, we encourage scientists to include physical properties of tardigrade habitats as explanatory variables in their studies.

Health risk and germ cell toxicity of five commercially available sachet waters in Nigeria: a public health concern.

Background: Sachet water is the most common form of portable water commercially available in Nigeria. Methodology: Using the murine sperm count and sperm abnormality assay, the germ cell toxicity of five common commercially available sachet waters in Nigeria was assessed in this study. The levels of hormones such as Follicle Stimulating Hormone (FSH), Luteinizing Hormone (LH) and Total Testosterone (TT); and activities of catalase (CAT), alanine aminotransferase (ALT), superoxide dismutase (SOD), aspartate aminotransferase (AST), and alkaline phosphatase (ALP) were evaluated. The heavy metal and physicochemical parameters of the sachet waters were also analyzed. Healthy male mice were allowed to freely drink the sachet waters for 35 days after which they were sacrificed. Results: The findings indicated that the concentrations of some heavy metals (As, Cr, and Cd) in the sachet waters exceeded the limit by regulatory organizations. The data of the total carcinogenic risk (TCR) and total non-carcinogenic risk (THQ) of some heavy metals associated with the ingestion of sachet water for adults and children showed that the values exceeded the acceptable threshold, and thus, is indicative of a high non-carcinogenic and carcinogenic risks. The data of the sperm abnormality assay showed that in the exposed mice, the five sachet waters induced a statistically significant (P < 0.05) increase in abnormal sperm cells and a significantly lower mean sperm count. Additionally noted were changes in the serum activities of TT, FSH, ALP, AST, ALT, and LH. Conclusion: Thus, the sachet waters studied contained agents that can induce reproductive toxicity in exposed humans. This is of public health importance and calls for immediate action by regulatory bodies.

Case study: Evaluating deep-water start techniques and training demands in seated slalom waterskiing for an athlete with paraplegia.

Purpose: Recreational and competitive slalom waterskiing is increasingly popular among individuals with spinal cord injuries (SCI), particularly for those with paraplegia using sit-skis. A key component of slalom skiing is the deep-water start (DWS), yet little is known about the physiological and physical demands of this activity when the athlete is seated. This study aims to fill this gap by focusing on the training requirements for a seated slalom athlete. Materials and methods: Focusing on a young male athlete with paraplegia, this case study evaluates the effectiveness and efficiency of traditional (TDWS) and alternative (ADWS) DWS techniques during seated slalom waterskiing sessions. It assesses internal training load (TL) through heart rate (HR) zones and session rating of perceived exertion (sRPE), alongside pre- and post-session handgrip strength measurements to gauge peripheral muscle fatigue. Results and conclusions: Performing the ADWS, achieving a full success rate, proved more effective but slightly more time-consuming than TDWS, which had limited success. HR during DWS maneuvers ranged from 63.2 to 81.3% of maximal HR, with most sessions occurring below the ventilatory threshold, thus perceived as hard effort. A moderate yet non-significant correlation was found between HR and sRPE-based TL. A significant reduction in handgrip strength post-session underscores the activity's demands. These insights illuminate the technical, physiological, and physical challenges in mastering DWS for seated slalom athletes with SCI, providing valuable guidance for the development of tailored training programs and techniques in this sport.

Sodium lignosulfonate as an extracting agent of methylene blue dye using a polymer-enhanced ultrafiltration technique.

The purpose of this research was to evaluate the efficacy of sodium lignosulfonate (LS) as a dye adsorbent in the removal of methylene blue (MB) from water by polymer-enhanced ultrafiltration. Various parameters were evaluated, such as membrane molecular weight cut-off, pH, LS dose, MB concentration, applied pressure, and the effect of interfering ions. The results showed that the use of LS generated a significant increase in MB removal, reaching an elimination of up to 98.0 % with 50.0 mg LS and 100 mg L-1 MB. The maximum MB removal capacity was 21 g g-1 using the enrichment method. In addition, LS was reusable for up to four consecutive cycles of dye removal-elution. The removal test in a simulated liquid industrial waste from the textile industry was also effective, with a MB removal of 97.2 %. These findings indicate that LS is highly effective in removing high concentrations of MB dye, suggesting new prospects for its application in water treatment processes.

Development of xanthan gum intelligent oil-in-water ink and its application in pork freshness preservation.

To optimize the stability of oil-based inks and ensure their wide application in freshness indication, new natural indicator inks were prepared using a stable oil-in-water structure. This study selected natural Lycium ruthenicum anthocyanin as the dye and glucose as the pigment carrier. Soybean oil was introduced as a linker and xanthan gum as a thickener, and an oil-in-water ink with the function of freshness indication was successfully developed. In ensuring the safety of ink labels for use on food packaging, particular attention is paid to the origin and properties of the materials used. All ingredients are of food-grade or bio-friendly provenance, thereby ensuring the safety of the product when in direct contact with food. We measured the viscosity, particle size and fineness of the ink for micro characterization and evaluated its macro printing performance by its printing effect on A4 paper. According to the experimental results, when the water-oil ratio of the ink is 10:5, the average particle size of the emulsion system is 822.83 nm, and the fineness reaches 5 µm. These values are relatively low, which indicates that the stability of the ink system is high at this time, and the ink shows excellent rheological and printing characteristics. With this water-to-oil ratio, the ink can show the best results when printed on A4 paper, clearly displaying image details. In addition, in fresh pork applications, inks with a 10: 5 water-to-oil ratio provide an accurate and highly sensitive indication of the freshness of pork. When the freshness of the pork changes, the ink color responds promptly. This high sensitivity makes the ink ideal for use as a food freshness indication tool, providing consumers with an intuitive and reliable reference for pork freshness. As a further innovation, combining this ink-printed label with a WeChat app not only allows consumers to know the freshness of the food in real-time but also tracks the supply chain information of the food, providing a more comprehensive application prospect for freshness-indicating products.

Enhanced brackish water desalination in capacitive deionization with composite Zn-BTC MOF-incorporated electrodes.

In this study, composite electrodes with metal-organic framework (MOF) for brackish water desalination via capacitive deionization (CDI) were developed. The electrodes contained activated carbon (AC), polyvinylidene fluoride (PVDF), and zinc-benzene tricarboxylic acid (Zn-BTC) MOF in varying proportions, improving their electrochemical performance. Among them, the E4 electrode with 6% Zn-BTC MOF exhibited the best performance in terms of CV and EIS analyses, with a specific capacity of 88 F g-1 and low ion charge transfer resistance of 4.9 Ω. The E4 electrode showed a 46.7% increase in specific capacitance compared to the E1 electrode, which did not include the MOF. Physicochemical analyses, including XRD, FTIR, FESEM, BET, EDS, elemental mapping, and contact angle measurements, verified the superior properties of the E4 electrode compared to E1, showcasing successful MOF synthesis, desirable pore size, elemental and particle-size distribution of materials, and the superior hydrophilicity enhancement. By evaluating salt removal capacity (SRC) in various setups using an initially 100.0 mg L-1 NaCl feed solution, the asymmetric arrangement of E1 and E4 electrodes outperformed symmetric arrangements, achieving a 21.1% increase in SRC to 6.3 mg g-1. This study demonstrates the potential of MOF-incorporated electrodes for efficient CDI desalination processes.