Enhanced Adsorptivity of Hexavalent Chromium in Aqueous Solutions Using CTS@nZVI Modified Wheat Straw-Derived Porous Carbon.

Using KOH-modified wheat straw as the precursor, wheat straw biochar was produced through carbonization at 500 °C. Subsequently, a synthetic material containing nano-zero-valent iron (nZVI) was prepared via liquid phase reduction (nZVI-WSPC). To enhance its properties, chitosan (CTS) was used by crosslinking to form the new adsorbent named CTS@nZVI-WSPC. The impact of CTS on parameters such as mass ratio, initial pH value, and adsorbent dosage on the adsorption efficiency of Cr(VI) in solution was investigated through one-factor experiments. Isotherm adsorption and thermodynamic analysis demonstrated that the adsorption of Cr(VI) by CTS@nZVI-WSPC conforms to the Langmuir model, with a maximum adsorption capacity of 147.93 mg/g, and the adsorption process is endothermic. Kinetic analysis revealed that the adsorption process follows a pseudo-second-order kinetic model. The adsorption mechanism, as elucidated by SEM, FTIR, XPS, and XRD, suggests that the process may involve multiple mechanisms, including pore adsorption, electrostatic adsorption, chemical reduction, and surface chelation. The adsorption capacity of Cr(VI) by CTS@nZVI-WSPC remains high after five cycles. The adsorbent is simple to operate, economical, efficient, and reusable, making it a promising candidate for the treatment of Cr(VI) in water.

Influence of biochar on succession of fungal communities during food waste composting.

This study aims to examine the effects of biochar on fungal dynamics during food waste composting. The different dosage of wheat straw biochar from 0 to 15% (0%, 2.5%, 5%, 7.5%, 10%, and 15%) were used as an additive to composting and examined for 42 days. The results showed that Ascomycota (94.64%) and Basidiomycota (5.36%) were the most dominant phyla. The most common fungal genera were Kluyveromyces (3.76%), Candida (5.34%), Trichoderma (2.30%), Fusarium (0.46%), Mycothermus-thermophilus (5.67%), Trametes (0.46%), and Trichosporon (3.38%). The average number of operational taxonomic units were 469, with the greatest abundance seen in the 7.5% and 10% treatments. Redundancy analysis revealed that different concentrations of biochar applied treatments have significantly distinct fungal communities. Additionally, correlation analyses of fungal interactions with environmental elements, performed through a heatmap, also indicate a distinct difference among the treatments. The study clearly demonstrates that 15% of biochar has a positive impact on fungal diversity and improves the food waste composting.

Exploring the synergistic effects of biochar and arbuscular mycorrhizal fungi on phosphorus acquisition in tomato plants by using gene expression analyses.

Arbuscular mycorrhizal (AM) fungi are symbiotic organisms that contribute significantly to plant mineral nutrition, mainly phosphate. However, their benefits are constricted by the availability of phosphate in the soil, and thus they are recalcitrant as amendment in highly fertilized soils. Biochars are by-products of the pyrolysis of biomass in the absence of oxygen. They can improve soil properties and act as a source of nutrients for plants. However, depending on their origin, the final composition of biochars is extremely variable and thus, their efficiency unpredictable. In order to gain mechanistic insights into how the combined application of biochars and AM fungi contribute to plant phosphate nutrition and growth, we used gene expression analyses of key symbiotic marker genes. We compared for this analysis two biochars originated from very different feedstocks (chicken manure and wheat straw) on tomato plants with or without the AM fungus Rhizophagus irregularis. Our results show that the synergy between AM fungi and biochars as P biofertilizers is greatly governed by the origin of the biochar that determines the speed at which phosphate is released to the soil and absorbed by the plant. Thus, chicken manure biochar quickly impacted on plant growth by readily releasing P, but it turned out detrimental for symbiosis formation, decreasing colonization levels and expression of key symbiotic plant marker genes such as SlPT4 or SlFatM. In contrast, wheat straw biochar was inferior at improving plant growth but stimulated the establishment of the symbiosis, producing plants with the same concentration of phosphate as those with the chicken manure. Taken together, slow P releasing biochars from plant residues appears to be a more promising amendment for long terms experiments in which biofertilizers such as AM fungi are considered. Furthermore, our results indicate that implementing plant transcriptomic analyses might help to mechanistically dissect and better understand the effects of biochars on plant growth in different scenarios.

Biochar as smart organic catalyst to regulate bacterial dynamics during food waste composting.

The impact of wheat straw biochar (WSB) on bacterial dynamics succession during food waste (FW) composting was analyzed. Six treatments [0(T1), 2.5(T2), 5 (T3), 7.5 (T4), 10 (T5), and 15 %(T6)] dry weight WSB were used with FW and saw dust for composting. At the highest thermal peak at 59 ℃ in T6, the pH varied from 4.5 to 7.3, and electrical conductivity among the treatments varied from 1.2 to 2.0 mScm1. Firmicutes (25-97 %), Proteobacteria (8-45 %), and Bacteroidota (5-50 %) were among the dominate phyla of the treatments. Whereas, Bacillus (5-85 %), Limoslactobacillus (2-40 %), and Sphingobacterium (2-32 %) were highest among the identified genus in treatments but surprisingly Bacteroides was in greater abundance in the control treatments. Moreover, heatmap constructed with 35 various genera in all the treatments showed that Gammaproteobacterial genera contributed in large proportion after 42 days in T6. Additionally, a dynamic shift from Lactobacillus fermentum to higher abundance of Bacillus thermoamylovorans was reported on 42 days of FW composting. Biochar 15 % amendment can improve FW composting by influencing bacterial dynamics.

Insight into the adsorption isotherms and kinetics of Pb (II) on pellet biochar via in-situ non-destructive 3D visualization using micro-computed tomography.

The micro-CT technique was applied in adsorption visualization of Pb (II) on the pellet biochar derived from wheat straw to provide information on understanding the complex heavy metal-biochar interaction during the process. The 3D distribution of Pb (II) on the biochar was well in line with the results of isothermal and kinetic adsorption experiments as well as those of simulation with Langmuir and Weber-Morris intraparticle diffusion (IPD) models. It was shown that Pb (II) was preferentially adsorbed on the surface of the biochar at an initial Pb (II) concentration of 50 mg/L. However, at a higher initial concentration of 100 mg/L, the adsorption process occurred in a two-stage regime, namely rapid surface adsorption followed by slow intraparticle diffusion. This research offered a new way for investigation of the complex adsorption behavior of heavy metals on biochar, as well as construction and optimization of related adsorption models.

Improved adsorption properties of tetracycline on KOH/KMnO4 modified biochar derived from wheat straw.

Modification of pristine biochars has received increasing attentions due to the significant potential in enhancing adsorption performance. In this work, the co-modification of KOH and KMnO4 on biochar (K-Mn-BC) was performed, with the effect of KOH/KMnO4 modification on biochar properties and their adsorption toward tetracycline (TC) being extensively explored. Results showed that KOH/KMnO4 modification can significantly regulate biochars to form hierarchical structure. The obtained K-Mn-BC was characterized with a high specific surface area (1524.6 m2 g-1) and total pore volume (0.85 cm3 g-1). In addition, the K-Mn-BC exhibited a high adsorption capacity of 584.19 mg g-1 toward TC at 318 K, and pseudo-second-order (R2:0.993～0.998) and Langmuir (R2: 0.834～0.874) models can fit well with the adsorption behavior. Moreover, the obtained K-Mn-BC can efficiently adsorb TC within a wide pH range (3.0-10.0), and were not affected by the co-existing ions. The possible mechanisms for the high adsorption capacity were ascribed to the pore filling and π-π interaction, following by hydrogen bonding and metal complexation. The obtained K-Mn-BC is a suitable adsorbent for TC removal from water due to the hierarchical structure, high adsorption capacity, and stable adsorption effect.

Preparation and characterization of wheat straw biochar loaded with aluminium/lanthanum hydroxides: a novel adsorbent for removing fluoride from drinking water.

In this work, a novel adsorbent of aluminium/lanthanum loaded wheat straw biochar (Al-La-WSB), was prepared by using a facile approach and used for fluoride removal. The Al-La-WSB and its pristine wheat straw biochar (WSB) were characterized by scanning electronic microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray powder diffraction (XRD) methods. Batch adsorption experiments were carried out to investigate adsorbent performance, the highest removal rate was observed at pH 9, contact time of 7 h and Al-La-WSB dose of 1 g L-1. Lagergren pseudo-second-order kinetics and Langmuir isotherm model fitted the experimental data well. The maximum fluoride adsorption capacity of Al-La-WSB at different experiment temperature of 298, 308 and 318 K, was 51.28 mg g-1, 46.73 mg g-1 and 50.25 mg g-1, respectively, which was better than most reported adsorbents. The Al-La-WSB performed well over a considerable wide pH range of 3-10 and carried positive charge at pH < 4.8. The presence co-existing ions of SO42-, HCO3-, Cl- and NO3- had a minor impact on fluoride adsorption besides PO43-. Regeneration experiment results showed that the Al-La-WSB had an excellent reusability. According to the adsorbent characterization and batch adsorption experiment, the adsorption of fluoride on the Al-La-WSB was primarily a chemisorption, involving electrostatic interactions and ion exchange, which nitrate ion and hydroxyl played a major role. The results suggested that the Al-La-WSB could be a great adsorbent for removing fluoride from drinking water.

A performance evaluation study of nano-biochar as a potential slow-release nano-fertilizer from wheat straw residue for sustainable agriculture.

Agro-Wastes are identified as to manufacture potential valuable organic biochar fertilizer product economically while also managing the waste. Biochar (BC) produced from agriculture waste is helps to improve the soil because of its neutral pH, addition of organic carbon to the soil and lower salt index values. This study focused on the development of nano-biochar into a more enhanced biochar product where it was checked whether the biochar derived from wheat straw can absorb nutrients and then act as support matter for releasing micro-nutrients and macro-nutrients for the plants on slow liberation basis. Wheat biochar (WBC) and wheat nano-biochar (WBNC) were synthesized by pyrolysis at two different temperatures and nutrients were fused into the WBC via impregnation technique. Physical parameters such as Proximate, Ultimate analysis & other were also studied and inspected by standard control procedures. Studies were also carried out on water retention (WR), water absorbance (WA), swelling ratio (SR) and equilibrium water content (EWC) for all samples; data was collected and compared for the better sample. Slow-release studies performed portrayed the release pattern of nutrients for prolonged periods, which are very important for the plant growth, yield and productivity. Overall, the experimental results displayed that BNC produced at 350 °C showed promising features of (SI:0.05, SR: 3.67, WA:64%, EWC:78.6%, FC:53.05% and pH:7.22), is a good substance however the nano-biochar has improved results; environmental friendly & could be utilized as a potential fertilizer on slow release for sustainable and green agriculture application.

Chemical stabilization of Cd-contaminated soil using fresh and aged wheat straw biochar.

Metal mining and smelting activities can introduce a substantial amount of potentially toxic elements (PTE) into the environment that can persist for an extended period. That can limit the productivity of the land and creates dangerous effects on ecosystem services. The effectiveness of wheat straw biochar to immobilize Cd in contaminated soil due to metal smelting activities was investigated in this study. The biochar carbon stability and long-term provisioning of services depend on the biochar production conditions, nature of the feedstock, and the biotic and abiotic environmental conditions in which the biochar is being used. Within this context, three types of wheat straw biochar were produced using a screw reactor at 400 °C, 500 °C, and 600 °C and tested in a laboratory incubation study. Soil was amended with 2 wt% of biochar. Both fresh and aged forms of biochar were used. Biochars produced at lower temperatures were characterized by lower pH, a lower amount of stable C, and higher amounts of acidic surface functional groups than the freshly produced biochars at higher production temperatures. At the end of the 6 months of incubation time, compared to the soil only treatment, fresh and aged forms of wheat straw biochar produced at 600 °C reduced the Cd concentration in soil pore water by 22% and 15%, respectively. Our results showed that the aged forms of biochar produced at higher production temperatures (500 °C and 600 °C) immobilized Cd more efficiently than the aged forms of lower temperature biochar (400 °C). The findings of this study provide insights to choose the production parameters in wheat straw biochar production while considering their aging effect to achieve successful stabilization of Cd in contaminated soils.

Efficiency of Wheat Straw Biochar in Combination with Compost and Biogas Slurry for Enhancing Nutritional Status and Productivity of Soil and Plant.

In the present study, we investigated the impact of different combinations of wheat straw biochar, compost and biogas slurry on maize growth, physiology, and nutritional status in less productive soils. The experiment was performed as a completely randomized block design in a greenhouse pot experiment. The compost and biogas slurry were applied with and without biochar. The results revealed that a combination of biochar, compost, and biogas slurry enhanced the cation exchange capacity (31%), carbon (83%), phosphorus (67%) and potassium (81%) contents in the soil. Likewise, a significant increase in soil microbial biomass carbon (15%) and nitrogen (37%) was noticed with the combined use of all organic amendments. Moreover, the combined application of biochar, compost and biogas slurry enhanced soil urease and ß-glucosidase activity up to 96% and 67% over control respectively. In addition, plant height, chlorophyll content, water use efficiency and 1000-grain weight were also enhanced up to 54%, 90%, 53% and 21% respectively, with the combined use of all amendments. Here, biochar addition helped to reduce the nutrient losses of compost and biogas slurry as well. It is concluded that biochar application in combination with compost and biogas slurry could be a more sustainable, environment-friendly and cost-effective approach, particularly for less fertile soils.

Improvement effect of pyrolyzed agro-food biochar on the properties of magnesium phosphate cement.

This study extends the application of pyrolyzed biochar and investigates its influence on the mechanical, sorption and microstructure properties of magnesium phosphate cement mortar. Biochar was produced by the pyrolysis of wheat straw biomass by controlled burning and its replacement level was kept up to 1.5%. At the age of 30 days, the compressive and flexural strength of mortar containing 1.5% biochar was 17.3% and 9.0% higher as compared to the control mortar, which was associated with the micro-filler and internal reservoir effect of biochar particles. Inclusion of biochar considerably improved the resistance of magnesium phosphate cement in the water environment. Sorptivity and water absorption of mortar containing 1.5% biochar was reduced by 33.8% and 25% respectively than the control mortar. Biochar densified the microstructure of mortars by filling the microcracks and blocking the pores. X-ray diffraction and Fourier transform infrared spectroscopy did not provide any information about the formation of new hydration products. Elemental analysis of mortar samples using energy dispersive spectroscopy showed the presence of some elements, which indicates the possibility of new hydration products. Based on the positive results in this study, future study will include the detailed chemical effect of biochar on magnesium phosphate cement.

Biochar counteracts nitrification inhibitor DMPP-mediated negative effect on spinach (Spinacia oleracea L.) growth.

The use of nitrification inhibitors (NIs) such as 3,4-dimethylpyrazole phosphate (DMPP) has been suggested to diminish agricultural soil nitrate (NO3-) loss and increase nitrogen (N) use efficiency (NUE). However, the yield of ammonium (NH4+)-sensitive plants such as spinach (Spinacia oleracea L.) may be adversely affected by the application of NIs at high N levels and, on the other hand, the efficiency of the NIs may also be affected by soil amendments such as biochar. These two issues are still not adequately addressed. The aim of this study was to evaluate the effect of different N levels including DMPP or not in a calcareous soil with and without amendment of wheat straw biochar on spinach yield, NUE, nitrate concentration of spinach leaf, activity of enzymes nitrate reductase (NR) and nitrite reductase (NiR), and soil ammonium (NH4+) and NO3- concentration under greenhouse conditions. This experiment was carried out with different N rates factor at seven levels (un-fertilized, N0; fertilized with 50 mg N kg-1 soil, N50; fertilized with 75 mg N kg-1 soil, N75; fertilized with 100 mg N kg-1 soil, N100; fertilized with N50 + DMPP; fertilized with N75 + DMPP; and fertilized with N100 + DMPP) and biochar (BC) factor at two levels (0, 0%BC; and 2% (w/w), 2%BC) with six replications over a 56-day cultivation period of spinach. Results showed that the application of DMPP had no significant effect on the yield of spinach plant at low and medium levels of N (50 and 75 mg N kg-1 soil), but decreased the yield of this plant at the higher level of N (100 mg N kg-1 soil). However, application of BC decreased the negative effect of DMPP on spinach yield as the yield in spinach plants fertilized with N75 + DMPP and N100 + DMPP significantly increased. Both application of DMPP and addition of BC to soil decreased leaf NO3- concentration by 29.2% and 16.3% compared to control, respectively. Biochar compared to control decreased NR activity by 46.3%. With increasing N rate, NR and NiR activities increased, but DMPP decreased the activities of both enzymes. Biochar reduced the efficiency of DMPP as soil NH4+ concentration was higher in the treatments containing DMPP without BC at 56 days after planting. Biochar and DMPP could increase the quality of spinach plant through decreasing the leaf NO3- concentration. In general, wheat straw biochar counteracted DMPP-mediated negative effect on growth of spinach plant at high level of N by decreasing the efficiency of this inhibitor. These results provide the useful information for managing the application rate of N fertilizers including DMPP in biochar-amended soil.

Time-dependent evolution of Zn(II) fractions in soils remediated by wheat straw biochar.

Biochar is a cost-effective and multifunctional carbon material, which can be used to immobilize heavy metal (HM) in soil. To date, the immobilization of different HM by various biochars are well-studied, however, little is known about the release condition of the immobilized HM. As the released HM may bring a threat to the soil environment, it is critical to understand the release pattern of biochar-sorbed HM in soil. Herein, six wheat straw-derived biochars (WBs) pyrolyzed under different temperature and duration time were loaded with zinc(Zn (II)), and the evolution of Zn(II) fractions in soils remediated by WBs over time was investigated by Community Bureau of Reference (BCR) three-step sequential extraction method. The main Zn(II) species sorbed on WBs were the Zn(II) sorbed on the acidic functional groups of WB and that sorbed on WB surface via electrostatic interaction. Generally, Zn(II) sorbed on high-temperature WB was more mobile than that sorbed on low-temperature WB. In the red soil, the soluble and exchangeable Zn(II) (i.e., Zn(II) in Fraction 1) in WB was inclined to transform to organic matter associated-Zn(II) (i.e., Zn(II) in Fraction 3) and residual Zn(II) (i.e., Zn(II) in Fraction 4). In the yellow-brown soil, the soluble and exchangeable Zn(II) in WB was prone to convert into amorphous Fe/Mn oxide associated-Zn(II) (i.e., Zn(II) in Fraction 2) and residual Zn(II). These results imply that Zn(II) sorbed by WB has the risk to be released into the soil environment, and WB produced at low temperature are more suitable to remediate soils with low/neutral pH.

Dynamics of fungal diversity and interactions with environmental elements in response to wheat straw biochar amended poultry manure composting.

The fungal dynamics and its correlation with physicochemical and gaseous emission were investigated using metagenomics and Heat map illustrator (HEMI). Five different concentrations of wheat straw biochar (WSB) were applied to poultry manure (PM) and composted for 50 days; those without the WSB treatment were used as a control. The results revealed the dominant phyla to be Chytridiomycota, Mucoromycota, Ascomycota and Basidiomycota, while Batrachochytrium, Rhizophagus, Mucor, and Puccinia were the superior genera. In particular, the diversity of Chytridiomycota and Ascomycota was more abundant among all of the treatments. Overall, the diversity of the fungal species was correspondent, but relative abundance varied significantly among all of the composts. Principle Coordinate Analysis (PCoA) and Non-Metric Multi- Dimensional Scaling (NMDS) indicated that different concentrations of WSB applied treatments have significantly distinct fungal communities. In addition, correlation analyses of fungal interactions with environmental elements via HEMI also indicate a clear difference among the treatments. Ultimately, the relative abundance of fungal composition significantly influenced the PM compost treated by the WSB.

Removal of cadmium in aqueous solution using wheat straw biochar: effect of minerals and mechanism.

The biochars were produced from wheat straw (WSBC) at different pyrolytic temperatures. Biochars were characterized by multiple instrumental techniques and were applied to remove Cd from aqueous solution. The removal mechanism was explored, and the quantitative information regarding the relative contribution of related mechanisms to Cd sorption on biochars was provided. The results showed that pseudo-second-order kinetic model, TC (two-compartment) model, and Freundlich isotherm could well fit the process of Cd sorption on biochars. The sorption could be divided into fast and slow adsorption stages. The order of the Cd removal capacity by biochar was WSBC700 > WSBC500 > WSBC300. Adsorption amount of Cd by biochar reduced when the biochar was rinsed with 1.0 M HCl, which indicated that acid-soluble minerals in biochar played an important role during the Cd removal process, especially for the biochar obtained at high pyrolytic temperature. Various equipments were used to investigate the interaction mechanism between biochar and Cd. Mineral precipitation, surface complexation, and cation-π interaction were the main mechanisms of Cd sorption on the biochars. The contribution of cation-π mechanism was in the range of 25.42-48.58%, 2.18-19.30% for surface complexation and 32.12-72.41% for mineral precipitation, respectively. The pyrolytic temperature significantly influenced the removal capacity and mechanism of Cd on biochars. The cation-π mechanism was predominant for biochar obtained at lower pyrolytic temperature. However, mineral precipitation mechanism played a crucial role for biochar obtained at high pyrolytic temperature. These results are helpful for the design or screening of "engineered biochar" to act as sorbents to remove or immobilized Cd in polluted soil or water. Graphical abstract ᅟ.

Wheat straw biochar amendments on the removal of polycyclic aromatic hydrocarbons (PAHs) in contaminated soil.

Soil amendments of wheat straw biochar (BC), lignocellulosic substrate (LS), BC+LS, and BC+LS+BR (surfactant Brij30) were investigated for the first time in order to remedy polycyclic aromatic hydrocarbons (PAHs)-polluted soil using pilot scale microcosm incubation. We hypothesized that the removal of PAHs could be inhibited due to the adsorption and immobilization of biochar and the inhibition depends on the molecular-weight of PAHs. The removal rates of phenanthrene (PHE) and Benzo[a]pyrene (BaP) ranked as C=BC>LS=LS+BC=LS+BC+BR and C=BC=LS+BC+BR>LS=LS+BC. Wheat straw biochar inhibited the removal of PHE and accelerated BaP removal. The activity of Dehydrogenase (DH) was depressed by the addition of the biochar while the activity of polyphenol oxidase (PPO) was stimulated. Lignocellulose and surfactant are favourable to sustain soil microbiological activity and the removal of PAHs although the diversity of bacterial community was not significantly changed. The findings implied that the components of PAHs are necessary to consider when the amendments are implemented by associated biochar in PAH-polluted soil.