In-situ electrochemical impedance analysis of a commercial SOFC stack fueled by real wood gas.

The combination of solid oxide fuel cells (SOFCs) and wood gasification has the potential to significantly increase renewable electricity production and decrease emissions. Depending on the quality of the wood gas, degradation processes have a significant impact on the reliability and lifetime of the SOFC. Using electrochemical impedance spectroscopy (EIS) and subsequent distribution of relaxation times (DRT) analysis, the impact on the degradation of coupling wood gasification with a commercial SOFC stack is determined in this study. The thermal behavior of the SOFC stack under various operating conditions, as well as various synthetic wood gas mixtures classified by their hydrogen-to-carbon (H/C) ratio, was assessed. The decrease in the H/C ratio from 8 to 1, observed during syngas and real wood gas operation, leads to a rightward shift in the Nyquist plots, suggesting an increase in the SOFC stack's impedance. Correlations between variations in the H/C ratio and their effects on anodic electrooxidation, ionic conduction, gas transport, and diffusion were identified using DRT analysis to interpret the EIS results. By incorporating an upstream desulfurization system and ensuring an H/C ratio greater than 2, the coupling of biomass gasification with the SOFC stack was stable to degradation issues.

Tip-to-base conduit widening remains consistent across cambial age and climates in Fagus sylvatica L.

Water transport, mechanical support and storage are the vital functions provided by the xylem. These functions are carried out by different cells, exhibiting significant anatomical variation not only within species but also within individual trees. In this study, we used a comprehensive dataset to investigate the consistency of predicted hydraulic vessel diameter widening values in relation to the distance from the tree apex, represented by the relationship Dh ∝ Lß (where Dh is the hydraulic vessel diameter, L the distance from the stem apex and ß the scaling exponent). Our analysis involved ten Fagus sylvatica L. trees sampled at two distinct sites in the Italian Apennines. Our results strongly emphasize that vessel diameter follows a predictable pattern with the distance from the stem apex, and ß ~ 0.20 remains consistent across cambial age and climates. This finding supports the hypothesis that trees do not alter their axial configuration represented by scaling of vessel diameter to compensate for hydraulic limitations imposed by tree height during growth. The study further indicates that within-tree variability significantly contributes to the overall variance of the vessel diameter-stem length exponent. Understanding the factors that contribute to the intraindividual variability in the widening exponent is essential, particularly in relation to interspecific responses and adaptations to drought stress.

Morphological characteristics and phylogenetic analyses revealed four new wood inhabiting fungi (Agaricomycetes, Basidiomycota) in Xizang Autonomous Region, China.

Four new fungi from Xizang in southwest China, Caloceraramaria, Ceraceomycesrhizomorphus, Leptosporomyceslinzhiensis, and Ramariaxizangensis are described and illustrated based on the morphological and molecular evidence. Caloceraramaria is characterized by the ramal and bright orange basidiomata, a monomitic hyphal system with simple septa generative hyphae, usually 4-septate basidiospores; Ceraceomycesrhizomorphus is characterized by the cream to yellowish basidiomata with rhizomorphs, cylindrical basidiospores; Leptosporomyceslinzhiensis is characterized by white with pink basidiomata, cylindrical to oblong ellipsoid basidiospores; Ramariaxizangensis is characterized by flesh pink basidiomata, branched dichotomously in 4-5 ranks, a monomitic hyphal system with clamped generative hyphae, ellipsoid to cylindrical and densely warted basidiospores.

Ethnobotany in Angola: The contribution of late 19th century christian missionaries to the knowledge of medicinal wild plants.

ETHNOPHARMACOLOGICAL RELEVANCE: Angola has an extraordinary plant diversity and a great ethnobotanical potential. However, there is a general lack of information about the first botanical explorations in the country and their contribution to the knowledge of the medicinal flora. AIM OF THE STUDY: The main aim of this study was to unveil the ethnobotanical legacy of José Maria Antunes and Eugène Dekindt, priests of the first Catholic mission in Huíla (Angola) and shed light on their contribution to the knowledge of medicinal wild plants of the country, including information on the uses, plant parts used, and preparation methods documented in the late 19th century. The findings are discussed considering recent ethnobotanical studies to offer a more comprehensive understanding of the historical and traditional uses of plants in Angola over the last two centuries. MATERIALS AND METHODS: Based on the information available in manuscripts and on the study of botanical collections preserved in herbaria of Portugal and Angola, we extracted relevant information about the species used in traditional medicine by the rural population of Huíla, the health conditions treated, and the mode of preparation and application. RESULTS: Our results revealed that Antunes and Dekindt conducted the first ethnobotanical study in Huíla, and documented a large number of medicinal wild plants. From these, we report 191 medicinal species, including 25 endemic and four introduced species, belonging to 56 plant families and 146 genera. Fabaceae family presents the highest richness of medicinal plants (39 taxa), followed by Rubiaceae (13), Asteraceae (10), and Apocynaceae (9). The illnesses reported were classified into 15 different categories, with the highest number of species (49) corresponding to unspecific conditions, such as general pains, chills, and fever. Thirty-seven species were reported for respiratory diseases, 31 for musculoskeletal problems, and 30 for digestive issues. Leaves were the most used plant part for medicinal purposes (84 species). Infusion was the most frequently described preparation method (40 species), followed by maceration (24 species), and powdering (36 species). CONCLUSIONS: The legacy of Antunes and Dekindt's work improves our understanding of Angola's botanical richness and traditional uses of plant resources. Our findings highlight the presence of unique medicinal resources in Angola, especially among endemic species, which hold the potential to improve the quality of life of rural communities. Moreover, our research underscores the lack of knowledge of medicinal species, emphasizing the risk of losing valuable historical information.

Self-Assembled MXene Supported on Carbonization-Free Wood for a Symmetrical All-Wood Eco-Supercapacitor.

As an emerging two-dimensional (2D) material, MXene has garnered significant interest in advanced energy storage systems, yet the stackable structure, poor mechanical stability, and lack of moldability limit its large-scale applications. To address this challenge, herein, the self-assembly of MXene on carbonization-free wood was obtained to serve as high-performance electrodes for symmetrical all-wood eco-supercapacitors by a steam-driven self-assembly method. This method can be implemented in a low-temperature environment, significantly simplifying traditional high-temperature annealing processes and generating minimal impact on the environment, human health, and resource consumption. The environmentally friendly steam-driven self-assembly strategy can be further extended into various wood-based electrodes, regardless of the types and structures of wood. As a typical platform electrode, the optimized MXene@delignified balsa wood (MDBW) achieves high areal capacitance and specific capacitance values of 2.99 F cm-2 and 580.55 F g-1 at an extensive mass loading of 5.16 mg cm-2, respectively, with almost loss-free capacitance after 10,000 cycles at 50 mA cm-2. In addition, an all-solid-state symmetrical all-wood eco-supercapacitor was further assembled based on MDBW-20 as both positive and negative electrodes to achieve a high energy density of 19.22 µWh cm-2 at a power density of 0.58 mW cm-2. This work provides an effective strategy to optimize wood-based electrodes for the practical application of biomass eco-supercapacitors.

Cultivation of novel Atribacterota from oil well provides new insight into their diversity, ecology, and evolution in anoxic, carbon-rich environments.

BACKGROUND: The Atribacterota are widely distributed in the subsurface biosphere. Recently, the first Atribacterota isolate was described and the number of Atribacterota genome sequences retrieved from environmental samples has increased significantly; however, their diversity, physiology, ecology, and evolution remain poorly understood. RESULTS: We report the isolation of the second member of Atribacterota, Thermatribacter velox gen. nov., sp. nov., within a new family Thermatribacteraceae fam. nov., and the short-term laboratory cultivation of a member of the JS1 lineage, Phoenicimicrobium oleiphilum HX-OS.bin.34TS, both from a terrestrial oil reservoir. Physiological and metatranscriptomics analyses showed that Thermatribacter velox B11T and Phoenicimicrobium oleiphilum HX-OS.bin.34TS ferment sugars and n-alkanes, respectively, producing H2, CO2, and acetate as common products. Comparative genomics showed that all members of the Atribacterota lack a complete Wood-Ljungdahl Pathway (WLP), but that the Reductive Glycine Pathway (RGP) is widespread, indicating that the RGP, rather than WLP, is a central hub in Atribacterota metabolism. Ancestral character state reconstructions and phylogenetic analyses showed that key genes encoding the RGP (fdhA, fhs, folD, glyA, gcvT, gcvPAB, pdhD) and other central functions were gained independently in the two classes, Atribacteria (OP9) and Phoenicimicrobiia (JS1), after which they were inherited vertically; these genes included fumarate-adding enzymes (faeA; Phoenicimicrobiia only), the CODH/ACS complex (acsABCDE), and diverse hydrogenases (NiFe group 3b, 4b and FeFe group A3, C). Finally, we present genome-resolved community metabolic models showing the central roles of Atribacteria (OP9) and Phoenicimicrobiia (JS1) in acetate- and hydrocarbon-rich environments. CONCLUSION: Our findings expand the knowledge of the diversity, physiology, ecology, and evolution of the phylum Atribacterota. This study is a starting point for promoting more incisive studies of their syntrophic biology and may guide the rational design of strategies to cultivate them in the laboratory. Video Abstract.

Electrical integrity and week-long oscillation in fungal mycelia.

The electrical potential of the mycelia of a cord-forming wood decay fungus, Pholiota brunnescens, was monitored for over 100 days on a plain agar plate during the colonization onto a wood bait. Causality analyses of the electrical potential at different locations of the mycelium revealed a clear and stable causal relationship with the directional flow of the electrical potential from the hyphae at the bait location to other parts of the mycelium. However, this causality disappeared after 60 days of incubation, coinciding with the onset of slow electrical oscillation at the bait location, which occurred over one week per oscillation cycle. We speculated that the hyphae that initially colonized the bait may act as a temporary activity center, which generates electrical signals to other parts of the mycelium, thereby facilitating the colonization of the entire mycelial body to the bait. The week-long electrical oscillation represents the longest oscillation period ever recorded in fungi and warrants further investigation to elucidate its function and stability in response to environmental stimuli.

PmHs1pro-1 monitors Bsursaphelenchus xylophilus infection and activates defensive response in resistant Pinus massoniana.

Plant resistance (R) genes play a crucial role in the detection of effector proteins secreted by pathogens, either directly or indirectly, as well as in the subsequent activation of downstream defence mechanisms. However, little is known about how R genes regulate the defence responses of conifers, particularly Pinus massoniana, against the destructive pine wood nematode (PWN; Bursaphelenchus xylophilus). Here, we isolated and characterised PmHs1pro-1, a nematode-resistance gene of P. massoniana, using bioinformatics, molecular biology, histochemistry and transgenesis. Tissue-specific expressional pattern and localisation of PmHs1pro-1 suggested that it was a crucial positive regulator in response to PWN attack in resistant P. massoniana. Meanwhile, overexpression of PmHs1pro-1 was found to activate reactive oxygen species (ROS) metabolism-related enzymes and the expressional level of their key genes, including superoxide dismutase, peroxidase and catalase. In addition, we showed that PmHs1pro-1 directly recognised the effector protein BxSCD1of PWN, and induced the ROS burst responding to PWN invasion in resistant P. massoniana. Our findings illustrated the molecular framework of R genes directly recognising the effector protein of pathology in pine, which offered a novel insight into the plant-pathogen arms race.

Effects of potential key substances in woodchips smoldering smoke on the formation of heterocyclic amines and polycyclic aromatic hydrocarbons in Frankfurter sausages.

The Frankfurter sausages smoked with beech, oak, and alder, respectively, were used to clarify the underlying impact of the smoke chemical composition on the levels of heterocyclic amines (HAs) and polycyclic aromatic hydrocarbons (PAHs). The result indicated that different wood types significantly affected the profiles of target substances in food matrices. The beech-smoked samples had lower contents of total free HAs (5.98-6.80 ng/g dry-weight-DW), PAH4 (3.31-3.83 ng/g DW), and PAH8 (10.0-10.8 ng/g DW), whereas the alder pyrolysis usually led to higher hazardous residues (8.26-9.19 ng/g DW of total free HAs, 4.24-6.60 ng/g DW of PAH4 and 14.1-23.3 ng/g DW of PAH8). In addition, the differences in smoke chemical composition were attributed to the different proportions of 15 key identified substances. Among them, two aldehydes (5-methyl-furfural & furfural) and two phenols (phenol & 5-hydroxymaltol) may have synergistic or competitive inhibitory effects on the formation of HAs and PAHs in smoked meat products.

Development of binderless fiberboard from poplar wood residue with Trametes hirsuta.

The utilization of agricultural and forestry residues for the development and preparation of green binderless fiberboard (BF) is an effective way to realize high-value utilization of lignocellulose biomass resources. This study focuses on the fabrication of BF with excellent mechanical and waterproof properties, utilizing poplar wood residue (PWR) as raw material and Trametes hirsuta as a pretreatment method. During the fermentation process, lignin-degrading enzymes and biological factors, such as sugars, were produced by T. hirsuta, which activated lignin by depolymerizing lignin bonds and modifying structural functional groups, and forming new covalent bonds between poplar fibers, ultimately enhancing adhesion. Additionally, the activated lignin molecules and sugar molecules coalesce under high temperatures and pressures, forming a dense carbonization layer that bolsters the mechanical properties of the fiberboard and effectively shields it from rapid water infiltration. The bio-pretreated BF for 10 days shows a MOR and MOE of up to 36.1 Mpa and 3704.3 Mpa, respectively, which is 261% and 247.8% higher than that of the bio-untreated fiberboard, and the water swelling ratio (WSR) rate is only 5.6%. Chemical composition analysis revealed that repolymerization occurred among lignin, cellulose, and hemicellulose, especially the molecular weight of lignin changed significantly, with the Mw of lignin increasing from 312066 g/mol to 892362 g/mol, and then decreasing to 825021 g/mol. Mn increased from 277790 g/mol to 316987.5 g/mol and then decreased to 283299.5 g/mol at 21 days. Compared to other artificial fiberboards prepared through microbial pretreatment, the BF prepared by microorganisms in this study exhibited the highest mechanical properties among the poplar wood biobased panels.

Improving residential wood burning emission inventories with the integration of readily available data sources.

Residential wood burning (RWB) is the largest anthropogenic source of PM2.5 in many North American and European cities in the winter. The current lack of information on the locations, types, and intensity of use of wood burning appliances limits the ability to accurately assess the exposure of the population to RWB emissions. In this study, we generated a high spatial resolution emission inventory for RWB in the province of Quebec, Canada using a novel data driven approach. The method first combines real estate and socioeconomic census data through machine learning models to estimate ownership rates of fireplaces and wood stoves. These ownership rates are then combined with household survey data (on wood consumption and types of appliances), emission factors and building registry data to generate the emission inventory at a 1Km2 resolution. Our proposed approach was able to capture spatial patterns in RWB appliance ownership and intensity of use, which may be overlooked by using simple urban vs rural or population based spatial proxies. The machine learning models explained 80.3 % and 63 % of the variability in wood stove and fireplace ownership rates with each appliance type exhibiting different spatial trends. Wood stoves were common in rural areas and among lower income households, whereas fireplaces were more common in urban areas. Additionally, we observed large spatial and regional variability in emissions per residence due to differences in wood consumption, appliance ownership rates, and appliance mixes (e.g. conventional vs certified). Our results suggest that using simple spatial proxies based on population, urbanization levels or residence type are not enough to explain the spatial distribution of RWB emissions as they might overlook other factors such as socioeconomic factors or regional heating preferences. Finally, our spatially distributed emissions were strongly correlated (r = 0.86) with the increase in PM2.5 concentrations during peak-RWB hours on winter weekends at 42 reference stations across the province of Quebec.

Non-destructive wood identification using X-ray µCT scanning: which resolution do we need?

BACKGROUND: Taxonomic identification of wood specimens provides vital information for a wide variety of academic (e.g. paleoecology, cultural heritage studies) and commercial (e.g. wood trade) purposes. It is generally accomplished through the observation of key anatomical features. Classic methodologies mostly require destructive sub-sampling, which is not always acceptable. X-ray computed micro-tomography (µCT) is a promising non-destructive alternative since it allows a detailed non-invasive visualization of the internal wood structure. There is, however, no standardized approach that determines the required resolution for proper wood identification using X-ray µCT. Here we compared X-ray µCT scans of 17 African wood species at four resolutions (1 µm, 3 µm, 8 µm and 15 µm). The species were selected from the Xylarium of the Royal Museum for Central Africa, Belgium, and represent a wide variety of wood-anatomical features. RESULTS: For each resolution, we determined which standardized anatomical features can be distinguished or measured, using the anatomical descriptions and microscopic photographs on the Inside Wood Online Database as a reference. We show that small-scale features (e.g. pits and fibres) can be best distinguished at high resolution (especially 1 µm voxel size). In contrast, large-scale features (e.g. vessel porosity or arrangement) can be best observed at low resolution due to a larger field of view. Intermediate resolutions are optimal (especially 3 µm voxel size), allowing recognition of most small- and large-scale features. While the potential for wood identification is thus highest at 3 µm, the scans at 1 µm and 8 µm were successful in more than half of the studied cases, and even the 15 µm resolution showed a high potential for 40% of the samples. CONCLUSIONS: The results show the potential of X-ray µCT for non-destructive wood identification. Each of the four studied resolutions proved to contain information on the anatomical features and has the potential to lead to an identification. The dataset of 17 scanned species is made available online and serves as the first step towards a reference database of scanned wood species, facilitating and encouraging more systematic use of X-ray µCT for the identification of wood species.

Carbon stock quantification in a floodplain restoration chronosequence along a Mediterranean-montane riparian corridor.

Uncertainty in the global carbon (C) budget has been reduced for most stocks, though it remains incomplete by not considering aquatic and transitional zone carbon stocks. A key issue preventing such complete accounting is a lack of available C data within these aquatic and aquatic-terrestrial transitional ecosystems. Concurrently, quantifiable results produced by restoration practices that explicitly target C stock accumulation and sequestration remain inconsistent or undocumented. To support a more complete carbon budget and identify impacts on C stock accumulation from restoration treatment actions, we investigated C stock values in a Mediterranean-montane riparian floodplain system in California, USA. We quantified the C stock in aboveground biomass, large wood, and litter in addition to the C and total nitrogen in the upper soil profile (5 cm) across 23 unique restoration treatments and remnant old-growth forests. Treatments span 40 years of restoration actions along seven river kilometers of the Cosumnes River, and include process-based (limited intervention), assisted (horticultural planting and other intensive restoration activities), hybrid (a combination of process and assisted actions), and remnant (old-growth forests that were not created with restoration actions) sites. Total C values measured up to 1100 Mg ha-1 and averaged 129 Mg ha-1 with biomass contributing the most to individual plot measurements. From 2012 to 2020, biomass C stock measurements showed an average 32 Mg ha-1 increase across all treatments, though treatment specific values varied. While remnant forest plots held the highest average C values across all stocks (336 Mg ha-1), C values of different stocks varied across treatment type. Process-based restoration treatments held more average biomass C (120 Mg ha-1) than hybrid (23 Mg ha-1) or assisted restoration treatments (50 Mg ha-1), while assisted restoration treatments held more average total C in soil and litter (58 Mg ha-1) than hybrid (35 Mg ha-1) and process-based restoration treatments (37 Mg ha-1). Regardless of treatment type, time was a significant factor for all C stock values. These findings support a more inclusive global carbon budget and provide valuable insight into restoration treatment actions that support C stock accumulation.

A comprehensive review on preparation and functional application of the wood aerogel with natural cellulose framework.

As the traditional aerogel has defects such as poor mechanical properties, complicated preparation process, high energy consumption and non-renewable, wood aerogel as a new generation of aerogel shows unique advantages. With a natural cellulose framework, wood aerogel is a novel nano-porous material exhibiting exceptional properties such as light weight, high porosity, large specific surface area, and low thermal conductivity. Furthermore, its adaptability to further functionalization enables versatile applications across diverse fields. Driven by the imperative for sustainable development, wood aerogel as a renewable and eco-friendly material, has garnered significant attention from researchers. This review introduces preparation methods of wood aerogel based on the top-down strategy and analyzes the factors influencing their key properties intending to obtain wood aerogels with desirable properties. Avenues for realizing its functionality are also explored, and research progress across various domains are surveyed, including oil-water separation, conductivity and energy storage, as well as photothermal conversion. Finally, potential challenges associated with wood aerogel exploitation and utilization are addressed, alongside discussions on future prospects and research directions. The results emphasize the broad research value and future prospects of wood aerogels, which are poised to drive high-value utilization of wood and foster the development of green multifunctional aerogels.

Linear and nonlinear regression modelling of industrial dye adsorption using nanocellulose@chitosan nanocomposite beads.

Nanocellulose@chitosan (nc@ch) composite beads were prepared via coagulation technique for the elimination of malachite green dye from aqueous solution. As malachite green dye is highly used in textile industries for dyeing purpose which after usage shows fatal effects to the ecosystems and human beings also. In this study the formulated nanocellulose@chitosan composite beads were characterized by Particle size analysis (PSA), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis were done to evaluate nanoparticles size distribution, morphological behaviour, functional group entities and degree of crystallinity of prepared beads. The nanocomposite beads adsorption performance was investigated for malachite green (MG) dye and BET analysis were also recorded to know about porous behaviour of the nanocomposite beads. Maximum removal of malachite green (MG) dye was found to be 72.0 mg/g for 100 ppm initial dye concentration. For accurate observations linear and non-linear modelling was done to know about the best-fitted adsorption model during the removal mechanism of dye molecules, on evaluating it has been observed that Langmuir isotherm and Freundlich isotherm show best-fitted observation in the case of linear and non-linear isotherm respectively (R2 = 0.96 & R2 = 0.957). In the case of kinetic linear models, the data was well fitted with pseudo-second-order showing chemosorption mechanism (R2 = 0.999), and in the case of non-linear kinetic model pseudo first order showed good fit showing physisorption mechanism during adsorption (R2 = 0.999). The thermodynamic study showed positive values for ΔH° and ΔS° throughout the adsorption process respectively, implying an endothermic behaviour. In view of cost effectiveness, desorption or regeneration study was done and it was showed that after the 5th cycle, the removal tendency had decreased from 48 to 38 % for 20-100 ppm dye solution accordingly. Thus, nanocomposite beads prepared by the coagulation method seem to be a suitable candidate for dye removal from synthetic wastewater and may have potential to be used in small scale textile industries for real wastewater treatment.

Implications of accounting for marker-based population structure in the quantitative genetic evaluation of genetic parameters related to growth and wood properties in Norway spruce.

BACKGROUND: Forest geneticists typically use provenances to account for population differences in their improvement schemes; however, the historical records of the imported materials might not be very precise or well-aligned with the genetic clusters derived from advanced molecular techniques. The main objective of this study was to assess the impact of marker-based population structure on genetic parameter estimates related to growth and wood properties and their trade-offs in Norway spruce, by either incorporating it as a fixed effect (model-A) or excluding it entirely from the analysis (model-B). RESULTS: Our results indicate that models incorporating population structure significantly reduce estimates of additive genetic variance, resulting in substantial reduction of narrow-sense heritability. However, these models considerably improve prediction accuracies. This was particularly significant for growth and solid-wood properties, which showed to have the highest population genetic differentiation (QST) among the studied traits. Additionally, although the pattern of correlations remained similar across the models, their magnitude was slightly lower for models that included population structure as a fixed effect. This suggests that selection, consistently performed within populations, might be less affected by unfavourable genetic correlations compared to mass selection conducted without pedigree restrictions. CONCLUSION: We conclude that the results of models properly accounting for population structure are more accurate and less biased compared to those neglecting this effect. This might have practical implications for breeders and forest managers where, decisions based on imprecise selections can pose a high risk to economic efficiency.

Spathaspora marinasilvae sp. nov., a xylose-fermenting yeast isolated from galleries of passalid beetles and rotting wood in the Amazonian rainforest biome.

Four yeast isolates were obtained from rotting wood and galleries of passalid beetles collected in different sites of the Brazilian Amazonian Rainforest in Brazil. This yeast produces unconjugated allantoid asci each with a single elongated ascospore with curved ends. Sequence analysis of the internal transcribed spacer-5.8 S region and the D1/D2 domains of the large subunit ribosomal RNA (rRNA) gene showed that the isolates represent a novel species of the genus Spathaspora. The novel species is phylogenetically related to a subclade containing Spathaspora arborariae and Spathaspora suhii. Phylogenomic analysis based on 1884 single-copy orthologs for a set of Spathaspora species whose whole genome sequences are available confirmed that the novel species represented by strain UFMG-CM-Y285 is phylogenetically close to Sp. arborariae. The name Spathaspora marinasilvae sp. nov. is proposed to accommodate the novel species. The holotype of Sp. marinasilvae is CBS 13467 T (MycoBank 852799). The novel species was able to accumulate xylitol and produce ethanol from d-xylose, a trait of biotechnological interest common to several species of the genus Spathaspora.

Optimization of mechanical properties and dimensional stability of densified wood using response surface methodology.

Wood has gained popularity as a building and decorative material due to its environmentally friendly and sustainable characteristics. Yet, its long maturation time poses a limitation on meeting the growing demand for wood products. This challenge has led to the plantation of fast-growing wood as an alternative solution. Unfortunately, the poor mechanical properties of fast-growing wood hinder its application. In this study, we developed novel densification-modified wood by combining alkali chemical pretreatment, cyclic impregnation, and mechanical hot-pressing techniques. Additionally, the response surface method was employed to rapidly determine the optimal preparation parameters, reducing the cost of preparation under various conditions. The optimized parameters resulted in densification-modified wood with a flexural strength and modulus of elasticity of 337.04 MPa and 27.43 GPa, respectively. Furthermore, the densified wood achieved excellent dimensional stability by reducing the water-absorbing thickness swelling to 1.15 % for 72-h water soaking. The findings indicated that the densification-modified wood possessed high tensile strength and elastic modulus, along with excellent dimensional stability. The proposed densified wood modification technology in this study offers new perspectives and design guidance for the application of outdoor engineering structures, energy-efficient buildings, and decorative materials.

Enhancement of thermal conductivity and abrasion resistance of woody carbon fiber composites via boride catalysis.

In order to investigate the effect of boron element on liquefied wood carbon fibers and their composites, boric acid and boron carbide were utilized to modify liquefied wood resin through copolymerization and blending methods respectively. Then boric acid-modified liquefied wood carbon fiber (BA-WCF) and boron carbide-modified liquefied wood carbon fiber (BC-WCF) were produced via melt spinning, curing, and carbonization treatments. As expected, this modification approach effectively prevents the formation of skin-core structures and accelerates the evolution of a graphite microcrystalline structure, thereby enhancing the mechanical properties of the carbon fibers. Particularly, the tensile strength and elongation at break of BA-WCF increased to 331.57 MPa and 7.57 % respectively, representing increments of 117 % and 86 % compared to the conventional fibers. Furthermore, the as-fabricated carbon fiber/resin composites (CFPRs), composing of BA-WCF or BC-WCF as fillers and liquefied wood resin as matrix, exhibited excellent interlaminar shear strength, outstanding abrasion resistance, and well thermal conductivity, as well as electrical performance, significantly outperforming the conventional carbon fiber/phenolic resin composites. The friction rate of BC-WP/BA-WCF/CF was 2.37 %, while its thermal conductivity could reach 1.927 W/(m·K). These promising attributes lay the groundwork for the development of high-performance carbon fiber-based materials, fostering their widespread utilization across various industries.

Wood cellulose films with different foldabilities triggered by dissolution and regeneration from concentrated H2SO4 and NaOH/urea aqueous solutions.

Forests are a major source of wealth for Canadians, and cellulose makes up the "skeleton" of wood fibers. Concentrated H2SO4 and NaOH/urea aqueous solutions are two efficient solvents that can rapidly dissolve cellulose. Our preliminary experiment obtained regenerated wood cellulose films with different mechanical properties from these two solvents. Therefore, herein, we aim to investigate the effects of aqueous solvents on the structure and properties of wood cellulose films. Regenerated cellulose (RC) films were produced by dissolving wood cellulose in either 64 wt% H2SO4 solution (RC-H4) or NaOH/urea aqueous solution (RC-N4). RC-H4 showed the higher tensile strength (109.78 ± 2.14 MPa), better folding endurance (20-28 times), and higher torsion angle (42°) than RC-N4 (62.90 ± 2.27 MPa, un-foldable, and 12°). The increased cellulose contents in the H2SO4 solutions from 3 to 5 wt% resulted in an improved tensile strength from 102.61 ± 1.99 to 132.93 ± 5.64 MPa and did not affect the foldability. RC-H4 also exhibited better water vapor barrier property (1.52 ± 0.04 × 10-7 g m-1 h-1 Pa-1), superior transparency (~90 % transmittance at 800 nm), but lower thermal stability compared to RC-N4. This work provides special insights into the regenerated wood cellulose from two aqueous solvents and is expected to facilitate the development of high-performance RC films from abundant forestry resources.