Phase Fraction Estimation in Multicomponent Alloy from EDS Measurement Data.

To perform quality assessments of both metal alloys and many other engineering materials, measurements of the volume fractions of phases or microstructure components are utilized. For this purpose, quantitative analysis of the evaluated components' distribution on metallographic specimens is often employed. Phases or components of the microstructure are identified based on the variation in signal received in the band of light seen. Problems with the correct identification of measurement results in this spectral band can be caused by the inhomogeneity of the etching when the alloy components are segregated. Additional uncertainty arises when the analyzed image pixel contains a boundary between grains of different phases. This article attempts to use the results of local chemical composition measurements as a source signal for quantitative evaluation of phase composition. For this purpose, quantitative maps of elemental concentration distributions, obtained with a Tescan Mira GMU high-resolution scanning electron microscope in QuantMap mode, were used as input data for the phase composition evaluation of an EN AC 46000 alloy sample. The X-ray microanalysis signal generation area may contain grains of more than one phase. Therefore, evaluation of the phase fractions in areas of individual measurements were calculated by looking for the minimum of the objective function, calculated as the sum of the squares of the deviations of the results of measurements of the concentration of individual elements from the weighted average values of solubilities of these elements in the phases.

De-MA.ch: A Web Database for Electron and X-ray Microanalysis to Assist Electron Microscope Lab Managers and Users.

Lab managers and users of scanning electron microscope or electron probe microanalyzer facilities aiming for qualitative or quantitative X-ray analyses require comprehensive, yet flexible documentation structures for their daily work and available reference material, with a complete X-ray data library, a repository of energy- and wavelength-dispersive spectra, and an instrument scheduling mechanism. An online multilaboratory database system available at https://de-ma.ch is presented with the primary goals of providing information on microanalytical reference materials, analytical setups, characteristic X-ray data, and for managing reservation and training requests. This website is designed for multiuser facilities, where experience ranges from beginners to expert users. Registered users will find these tools useful in developing and maintaining high-quality, reproducible, and efficient analyses, whereas lab managers will keep records of their microanalytical reference material database and analytical protocols. The database also serves an educational purpose by (a) providing information on reference materials, (b) encouraging students to select appropriate X-ray lines to analyze, (c) providing analytical setups for point analysis or mapping, (d) identifying unknown X-ray lines, (e) displaying energy- or wavelength-dispersive spectra, and (f) recalculating mineral formula from quantitative wt% analysis results, based on a number of oxygen atoms or cations.

Salt tolerance in mungbean is associated with controlling Na and Cl transport across roots, regulating Na and Cl accumulation in chloroplasts and maintaining high K in root and leaf mesophyll cells.

Salinity tolerance requires coordinated responses encompassing salt exclusion in roots and tissue/cellular compartmentation of salt in leaves. We investigated the possible control points for salt ions transport in roots and tissue tolerance to Na+ and Cl- in leaves of two contrasting mungbean genotypes, salt-tolerant Jade AU and salt-sensitive BARI Mung-6, grown in nonsaline and saline (75 mM NaCl) soil. Cryo-SEM X-ray microanalysis was used to determine concentrations of Na, Cl, K, Ca, Mg, P, and S in various cell types in roots related to the development of apoplastic barriers, and in leaves related to photosynthetic performance. Jade AU exhibited superior salt exclusion by accumulating higher [Na] in the inner cortex, endodermis, and pericycle with reduced [Na] in xylem vessels and accumulating [Cl] in cortical cell vacuoles compared to BARI Mung-6. Jade AU maintained higher [K] in root cells than BARI Mung-6. In leaves, Jade AU maintained lower [Na] and [Cl] in chloroplasts and preferentially accumulated [K] in mesophyll cells than BARI Mung-6, resulting in higher photosynthetic efficiency. Salinity tolerance in Jade AU was associated with shoot Na and Cl exclusion, effective regulation of Na and Cl accumulation in chloroplasts, and maintenance of high K in root and leaf mesophyll cells.

Physiological and Biochemical Aspects of Silicon-Mediated Resistance in Maize against Maydis Leaf Blight.

Maydis leaf blight (MLB), caused by the necrotrophic fungus Bipolaris maydis, has caused considerable yield losses in maize production. The hypothesis that maize plants with higher foliar silicon (Si) concentration can be more resistant against MLB was investigated in this study. This goal was achieved through an in-depth analysis of the photosynthetic apparatus (parameters of leaf gas exchange chlorophyll (Chl) a fluorescence and photosynthetic pigments) changes in activities of defense and antioxidative enzymes in leaves of maize plants with (+Si; 2 mM) and without (-Si; 0 mM) Si supplied, as well as challenged and not with B. maydis. The +Si plants showed reduced MLB symptoms (smaller lesions and lower disease severity) due to higher foliar Si concentration and less production of malondialdehyde, hydrogen peroxide, and radical anion superoxide compared to -Si plants. Higher values for leaf gas exchange (rate of net CO2 assimilation, stomatal conductance to water vapor, and transpiration rate) and Chl a fluorescence (variable-to-maximum Chl a fluorescence ratio, photochemical yield, and yield for dissipation by downregulation) parameters along with preserved pool of chlorophyll a+b and carotenoids were noticed for infected +Si plants compared to infected -Si plants. Activities of defense (chitinase, ß-1,3-glucanase, phenylalanine ammonia-lyase, polyphenoloxidase, peroxidase, and lipoxygenase) and antioxidative (ascorbate peroxidase, catalase, superoxide dismutase, and glutathione reductase) enzymes were higher for infected +Si plants compared to infected -Si plants. Collectively, this study highlights the importance of using Si to boost maize resistance against MLB considering the more operative defense reactions and the robustness of the antioxidative metabolism of plants along with the preservation of their photosynthetic apparatus.

Low-Temperature X-ray Microanalysis Sheds New Light on Mineral Nutrition Aspects of Insect Leaf Galling.

Manipulation of host plant physiology by leaf-galling insects is a multifaceted process. Among fundamental knowledge gaps surrounding this scientifically intriguing phenomenon is the appropriation of plant mineral nutrients and moisture for galling advantage. Small, soluble mineral ions and watery cell contents in dense gall tissues risk disruption during routine sample preparations. In this study, an X-ray microanalysis was applied to investigate gall mineral nutrition. Morphologically diverse leaf galls were sampled from three Australian rainforest tree species. Using cryo-analytical scanning electron microscopy, real-time X-ray analytical maps of cellular mineral nutrients and water were integrated with anatomical images of gall and leaf cross-sectional surfaces. A comparison of host-leaf and gall anatomies bore direct evidence of drastic changes to leaf cells through the galling process. Distinct "wet" and "dry" regions within galls were anatomically and/or chemically differentiated, suggesting specific functionality. "Wet" regions comprising hydrated cells including soft gall-cavity linings where larvae are known to feed contained soluble plant mineral nutrients, while C-rich "dry" tissues largely devoid of mineral nutrients likely contribute structural support. Mapping immobile nutrients such as Mn may provide a means of "matching" specific gall cell types to those in ungalled host-leaf tissues. The findings here provided otherwise inaccessible insights into leaf-gall mineral nutrition.

Detection and Quantification of Extraterrestrial Platinum Group Element Alloy Micronuggets from Archean Impactite Deposits by Low-Voltage Scanning Electron Microscopy/Energy-Dispersive X-ray Spectrometry.

Rare, heterogeneously composed platinum group element alloy micronuggets (PGNs) occur in primitive meteorites, micrometeorites, and terrestrial impactite deposits. To gain insight into the nature of these phases, we developed a workflow for the characterization of PGNs using modern scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry at a low accelerating voltage of 6 kV. Automated feature analysis-a combination of morphological image analysis and elemental analysis with stage control-allowed us to detect PGNs down to 200 nm over a relatively large analysis area of 53 mm2 with a conventional silicon drift detector (SDD). Hyperspectral imaging with a high-sensitivity, annular SDD can be performed at low beam current (∼100 pA) which improves the SEM image resolution and minimizes hydrocarbon contamination. The severe overlapping peaks of the platinum group element L and M line families at 2-3 keV and the Fe and Ni L line families at <1 keV can be resolved by peak deconvolution. Quantitative elemental analysis can be performed at a spatial resolution of <80 nm; however, the results are affected by background subtraction errors for the Fe L line family. Furthermore, the inaccuracy of the matrix correction coefficients may influence standards-based quantification with pure element reference samples.

Quantification of Unsupported Thin-Film X-ray Spectra Using Bulk Standards.

A quantification model which uses standard X-ray spectra collected from bulk materials to determine the composition and mass thickness of single-layer and multilayer unsupported thin films is presented. The multivariate model can be iteratively solved for single layers in which each element produces at least one visible characteristic X-ray line. The model can be extended to multilayer thin films in which each element is associated with only one layer. The model may sometimes be solved when an element is present in multiple layers if additional information is added in the form of independent k-ratios or model assumptions. While the algorithm is suitable for any measured k-ratios, it is particularly well suited to energy-dispersive X-ray spectrometry where the bulk standard spectra can be used to deconvolve peak interferences in the thin-film spectra. The algorithm has been implemented and made available in the Open Source application National Institute of Standards and Technology DTSA-II. We present experimental data and Monte Carlo simulations supporting the quantification model.

Monitoring of surrogate zoonotic parasites of Anisakidae and Echinobothrium deeghai as bioindicators by application of energy dispersive X-ray microanalysis (EDXMA).

The unique characteristic of quickly altered but stable response by helminth parasites against metals and elements in a variety of aquatic ecosystems because of pollution conditions merit these as significant markers of fish health as well as of marine and freshwater ecosystems. Biomagnification of toxicants released in aquatic reservoirs by human mediated processes incorporating mining in coastal zones, industrial and agricultural inputs contributed to damaging consequences of human health due particularly to human consumption of edible fish and other biota that are exposed to contaminants in aquatic ecosystems. The metals and elements analysed could be arranged in decreasing order of concentration were found to be, P > Ca > Cd > Mn > Hg > Pb > As > Zn > S > Fe > Al > Cr > Mg > Cl. The association between Echinobothrium deeghai and Rotundocollarette capoori demonstrated surrogate relationship to drain in highly toxic heavy metals like Hg, Cr, As, Cd, from the ambience in the micro-environment of cestodes and nematodes and thus acted as benefactors for the life of the brackish water oceanodromous fish.

Variability in cadmium stress tolerance among four maize genotypes: Impacts on plant physiology, root morphology, and chloroplast microstructure.

Cadmium (Cd) is detrimental to both plants and humans. Maize (Zea mays L.) genotypes exhibit variations in Cd accumulations. This study examined variations in Cd accumulation and tolerance among four maize genotypes with contrasting root morphology. The four maize genotypes were cultivated in a semi-hydroponic system with three Cd concentrations (0, 10, 20 µmol L-1). The effects of Cd on plant growth and physiology were assessed 39 days after transplanting. Results showed that root characteristics were positively correlated with root Cd accumulation and the bioconcentration factor under Cd20 treatment. Genotypes Shengrui999 and Zhengdan958 exhibited higher total Cd content than Xundan29 and Zhongke11 under Cd20 conditions. Cd toxicity led to membrane degradation of chloroplast mesophyll cells, loosening and swelling of grana lamella, and reduced starch reserves. The greater tolerance of Shengrui999 and Zhengdan958 was contributed to factors such as root biomass, shallower root depth, higher Cd content, accumulation of osmolyte such as soluble protein, antioxidant activities such as catalase (CAT), and the presence of phytohormone gibberellic acid. The study establishes a link between root morphology, Cd accumulation, and tolerance in maize plants, as demonstrated by the higher Cd accumulation and shallower root system in Cd-tolerant genotypes. This research provides a foundation for breeding maize cultivars better suited for adaptation to moderate Cd-contaminated environments.

TEM-EDS microanalysis: Comparison among the standardless, Cliff & Lorimer and absorption correction quantification methods.

Available quantification methods for energy dispersive X-ray microanalysis in transmission electron microscopy, such as the standardless method (SLM), the Cliff-Lorimer approximation (CLA) and the absorption correction method (ACM), are compared. As expected, the CLA and ACM give superior results with respect to the SLM. As far as absorption can be considered negligible, CLA and ACM perform similarly. However, starting from mass-thickness of the order of 22 × 10-6 g/cm2, absorption become significant and the ACM gives better results. More accurate analyses can be obtained with the ACM if distinct kO/Si factors are determined for light and heavy minerals, respectively, placing a divide at 2.90 g/cm3. Caution must be used when k-factors are derived indirectly from minerals with very different structure/chemistry, suggesting that separate k-factors data sets are required for accurate EDS quantification, at least for the major and diverse broad classes of minerals. Element diffusion of monovalent cations and channelling effects may represent a complication, especially in very anisotropic minerals such as phyllosilicates, where these two phenomena may occur together.

The effect of TIG welding on the structure and hardness of butt joints made of Inconel 718.

The tests discussed in the article aimed to analyse the structure and hardness of the heat affected zone and that of the weld in thin butt joints (1.0 mm) made of Inconel 718 using the TIG method and variable welding linear energy restricted within the range of 45 J/mm to 80 J/mm. The test joints were subjected to visual tests, macro and microscopic metallographic tests, scanning electron microscopy-based structural observations and hardness measurements. The tests concerned with the effect of the TIG welding of butt joints made of 1.0 mm thick sheets (Inconel 718) in laboratory conditions revealed that the most favourable quality of the sheets was obtained when welding arc linear energy was restricted within the range of approximately 45 J/mm to 80 J/mm. An increase in linear energy within the above-presented range led to an increase in the width of the weld and that of the HAZ (observed in the joints subjected to macroscopic metallographic tests). In addition, an increase in linear energy restricted within the aforesaid range increased the grain size in matrix γ (in the HAZ) from approximately 10 µm-20 µm. The structure of the weld contained the zone of columnar grains oriented towards the fusion line as well as large groups of primary grains having the dendritic structure with clearly visible axes of primary dendrites of varied orientation. In addition, the weld structure also contained precipitates in the form of low-melting eutectics located in interdendritic spaces.

Enhanced Na+ and Cl- sequestration and secretion selectivity contribute to high salt tolerance in the tetraploid recretohalophyte Plumbago auriculata Lam.

MAIN CONCLUSION: Enhanced secretion of Na+ and Cl- in leaf glands and leaf vacuolar sequestration of Na+ or root retention of Cl-, combined with K+ retention, contribute to the improved salt tolerance of tetraploid recretohalophyte P. auriculata. Salt stress is one of the major abiotic factors threatening plant growth and development, and polyploids generally exhibit higher salt stress resistance than diploids. In recretohalophytes, which secrete ions from the salt gland in leaf epidermal cells, the effects of polyploidization on ion homeostasis and secretion remain unknown. In this study, we compared the morphology, physiology, and ion homeostasis regulation of diploid and autotetraploid accessions of the recretohalophyte Plumbago auriculata Lam. after treatment with 300 mM NaCl for 0, 2, 4, 6, and 8 days. The results showed that salt stress altered the morphology, photosynthetic efficiency, and chloroplast structure of diploid P. auriculata to a greater extent than those of its tetraploid counterpart. Moreover, the contents of organic osmoregulatory substances (proline and soluble sugars) were significantly higher in the tetraploid than in the diploid, while those of H2O2 and malondialdehyde (MDA) were significantly lower. Analysis of ion homeostasis revealed that the tetraploid cytotype accumulated more Na+ in stems and leaves and more Cl- in roots but less K+ loss in roots compared with diploid P. auriculata. Additionally, the rate of Na+ and Cl- secretion from the leaf surface was higher, while that of K+, Mg2+, and Ca2+ secretion was lower in tetraploid plants. X-ray microanalysis of mesophyll cells revealed that Na+ mainly accumulated in different cellular compartments in the tetraploid (vacuole) and diploid (cytoplasm) plants. Our results suggest that polyploid recretohalophytes require the ability to sequester Na+ and Cl-(via accumulation in leaf cell vacuoles or unloading by roots) and selectively secrete these ions (through salt glands) together with the ability to prevent K+ loss (by roots). This mechanism required to maintain K+/Na+ homeostasis in polyploid recretohalophytes under high salinity provides new insights in the improved maintenance of ion homeostasis in polyploids under salt stress.

Differences in foliar phosphorus fractions, rather than in cell-specific phosphorus allocation, underlie contrasting photosynthetic phosphorus use efficiency among chickpea genotypes.

Although significant intraspecific variation in photosynthetic phosphorus (P) use efficiency (PPUE) has been shown in numerous species, we still know little about the biochemical basis for differences in PPUE among genotypes within a species. Here, we grew two high PPUE and two low PPUE chickpea (Cicer arietinum) genotypes with low P supply in a glasshouse to compare their photosynthesis-related traits, total foliar P concentration ([P]) and chemical P fractions (i.e. inorganic P (Pi), metabolite P, lipid P, nucleic acid P, and residual P). Foliar cell-specific nutrient concentrations including P were characterized using elemental X-ray microanalysis. Genotypes with high PPUE showed lower total foliar [P] without slower photosynthetic rates. No consistent differences in cellular [P] between the epidermis and mesophyll cells occurred across the four genotypes. In contrast, high PPUE was associated with lower allocation to Pi and metabolite P, with PPUE being negatively correlated with the percentage of these two fractions. Furthermore, a lower allocation to Pi and metabolite P was correlated with a greater allocation to nucleic acid P, but not to lipid P. Collectively, our results suggest that a different allocation to foliar P fractions, rather than preferential P allocation to specific leaf tissues, underlies the contrasting PPUE among chickpea genotypes.

Energy-Dispersive X-Ray Spectrum Simulation with NIST DTSA-II: Comparing Simulated and Measured Electron-Excited Spectra.

Electron-excited X-ray microanalysis with energy-dispersive spectrometry (EDS) proceeds through the application of the software that extracts characteristic X-ray intensities and performs corrections for the physics of electron and X-ray interactions with matter to achieve quantitative elemental analysis. NIST DTSA-II is an open-access, fully documented, and freely available comprehensive software platform for EDS quantification, measurement optimization, and spectrum simulation. Spectrum simulation with DTSA-II enables the prediction of the EDS spectrum from any target composition for a specified electron dose and for the solid angle and window parameters of the EDS spectrometer. Comparing the absolute intensities for measured and simulated spectra reveals correspondence within ±25% relative to K-shell and L-shell characteristic X-ray peaks in the range of 1­11 keV. The predicted M-shell intensity exceeds the measured value by a factor of 1.4­2.2 in the range 1­3 keV. The X-ray continuum (bremsstrahlung) generally agrees within ±10% over the range of 1­10 keV. Simulated EDS spectra are useful for developing an analytical strategy for challenging problems such as estimating trace detection levels.

Assessing the Impact of Secondary Fluorescence on X-Ray Microanalysis Results from Semiconductor Thin Films.

The impact of secondary fluorescence on the material compositions measured by X-ray analysis for layered semiconductor thin films is assessed using simulations performed by the DTSA-II and CalcZAF software tools. Three technologically important examples are investigated: AlxGa1−xN layers on either GaN or AlN substrates, InxAl1−xN on GaN, and Si-doped (SnxGa1−x)2O3 on Si. Trends in the differences caused by secondary fluorescence are explained in terms of the propensity of different elements to reabsorb either characteristic or bremsstrahlung X-rays and then to re-emit the characteristic X-rays used to determine composition of the layer under investigation. Under typical beam conditions (7­12 keV), the quantification of dopants/trace elements is found to be susceptible to secondary fluorescence and care must be taken to prevent erroneous results. The overall impact on major constituents is shown to be very small with a change of approximately 0.07 molar cation percent for Al0.3Ga0.7N/AlN layers and a maximum change of 0.08 at% in the Si content of (SnxGa1−x)2O3/Si layers. This provides confidence that previously reported wavelength-dispersive X-ray compositions are not compromised by secondary fluorescence.

Salt tolerance in relation to elemental concentrations in leaf cell vacuoles and chloroplasts of a C4 monocotyledonous halophyte.

Halophytes accumulate and sequester high concentrations of salt in vacuoles while maintaining lower levels of salt in the cytoplasm. The current data on cellular and subcellular partitioning of salt in halophytes are, however, limited to only a few dicotyledonous C3 species. Using cryo-scanning electron microscopy X-ray microanalysis, we assessed the concentrations of Na, Cl, K, Ca, Mg, P and S in various cell types within the leaf-blades of a monocotyledonous C4 halophyte, Rhodes grass (Chloris gayana). We also linked, for the first time, elemental concentrations in chloroplasts of mesophyll and bundle sheath cells to their ultrastructure and photosynthetic performance of plants grown in nonsaline and saline (200 mM NaCl) conditions. Na and Cl accumulated to the highest levels in xylem parenchyma and epidermal cells, but were maintained at lower concentrations in photosynthetically active mesophyll and bundle sheath cells. Concentrations of Na and Cl in chloroplasts of mesophyll and bundle sheath cells were lower than in their respective vacuoles. No ultrastructural changes were observed in either mesophyll or bundle sheath chloroplasts, and photosynthetic activity was maintained in saline conditions. Salinity tolerance in Rhodes grass is related to specific cellular Na and Cl distributions in leaf tissues, and the ability to regulate Na and Cl concentrations in chloroplasts.

The f-ratio model for quantitative X-ray microanalysis.

The f-ratio method is a new quantitative X-ray microanalysis method developed based on a cold field emission scanning electron microscope/energy dispersive spectroscopy system. The f-ratio is calculated with the characteristic X-ray intensities, and the Monte Carlo simulation is employed to build the theoretical relation between the system composition and the f-ratio. In this study, the f-ratio model is formulated with the elemental concentrations and the f-ratio coefficients. The f-ratio models in the binary S-Fe system and the ternary O-Al-Si system were studied, and the beam energy effects were investigated. The quantitative analyses were performed on the standard pyrite (FeS2) and kyanite (Al2SiO5) specimens, and the results show that the f-ratio model is able to achieve a satisfying accuracy.

Quantitative Electron-Excited X-ray Microanalysis With Low-Energy L-shell X-ray Peaks Measured With Energy-Dispersive Spectrometry.

Quantification of electron-exited X-ray spectra following the standards-based "k-ratio" (unknown/standard intensity) protocol with corrections for "matrix effects" (electron energy loss and backscattering, X-ray absorption, and secondary X-ray fluorescence) is a well-established method with a record of rigorous testing and extensive experience. Two recent studies by Gopon et al. working in the Fe­Si system and Llovet et al. working in the Ni­Si system have renewed interest in studying the accuracy of measurements made using L-shell X-ray peaks. Both have reported unexpectedly large deviations in analytical accuracy when analyzing intermetallic compounds when using the low photon energy Fe or Ni L-shell X-ray peaks with pure element standards and wavelength-dispersive X-ray spectrometry. This study confirms those observations on the Ni-based intermetallic compounds using energy-dispersive X-ray spectrometry and extends the study of analysis with low photon energy L-shell peaks to a wide range of elements, Ti to Se. Within this range of elements, anomalies in analytical accuracy have been found for Fe, Co, and Ge in addition to Ni. For these elements, the use of compound standards instead of pure elements usually resulted in significantly improved analytical accuracy. However, compound standards do not always provide satisfactory accuracy as is demonstrated for L-shell peak analysis in the Fe­S system: FeS and FeS2 unexpectedly do not provide good accuracy when used as mutual standards.

Expiration Date Effect on Mechanical and Chemical Properties of Glass Ionomer Cements

ABSTRACT: The glass ionomer cements (GICs) is a generic name given to a group of materials widely used in clinical dentistry which if used after the specified expiration date, material properties may be affected. to evaluate the Vick ers microhardness, surface morphology and the energy dispersive X-ray microanalysis (EDX), of GICs with different expiration dates that were stored at room temperature. specimens of highly viscous glass ionomer cement (HVGIC) (Ketac Cem and Ketac Molar) and resin-modified glass ionomer cement (RMGIC) (Vitrebond) with different expiration dates (current, close to their expiration and expired) were prepared for Vickers microhardness test and scanning electronic microscopy (SEM) with EDX, measuring 5 mm in diameter and 2 mm length, per the manufacturer's instructions, in standard cylindrical teflon molds. For the comparison of obtained values, the ANOVA test was used, while Tukey test was used for the multiple comparisons. In all the GICs used, the microhardness decreased as the expiration date approached, finding a significant statistical differen ce (P<0.05) in Ketac Molar and Vitrebond. SEM sample analysis revealed similar cohesive cracks in all tested materials. The EDX analysis revealed the presence of the elements F, Al and Si in all GICs and Ca only in Ketac Molar and Ketac Cem. The elements were found in a higher atomic percentage in the GICs with an current date and in a lower percentage in those with an expired date. HVGIC and RMGIC with an expiration date finish and that were stored at room temperature, suffer significant physical and chemical changes, which could put doubts its clinical effectiveness.

RESUMEN: El cemento de ionómero de vidrio (CIV) es un nombre genérico que se le da a un grupo de materiales ampliamente utilizados en odontología clínica que si se usan después de la fecha de vencimiento especificada, las propiedades del material pueden verse afectadas. evaluar la microdureza Vickers, la morfología superficial y el microanálisis de energía dispersa de rayos X (EDX), de CIV con diferentes fechas de caducidad almacenados a temperatura ambiente. Muestras de cemento de ionómero de vidrio de alta viscosidad (CIVAV) (Ketac Cem y Ketac Molar) y cemento de ionómero de vidrio modificado con resina (CIVMR) (Vitrebond) con diferentes fechas de vencimiento (vigente, próximo a su vencimiento y vencido) de 5 x 2 mm, fueron preparadas para microscopía electrónica de barrido (MEB) con EDX y microdureza Vickers, según las instrucciones del fabricante, en moldes de teflón cilíndricos estándar. Para la comparación de los valores obtenidos se utilizó la prueba ANOVA, mientras que para las comparaciones múltiples se utilizó la prueba de Tukey. En todos los CIV utilizados, la microdureza disminuyó a medida que se acercaba la fecha de vencimiento, encontrándose una diferencia estadística significativa (P <0.05) en Ketac Molar y Vitrebond. El análisis de la muestra en MEB reveló grietas cohesivas similares en todos los materiales probados. El análisis EDX reveló la presencia de los elementos F, Al y Si en todos los GIC y Ca solo en Ketac Molar y Ketac Cem. Los elementos se encontraron en mayor porcentaje atómico en los GIC con fecha vigente y en menor porcentaje en aquellos con una fecha vencida. Los CIVAV y CIVMR con fecha de caducidad vencida y que fueron alma- cenados a temperatura ambiente, sufrieron cambios físicos y químicos importantes, lo que podría poner en duda su efectividad clínica.

The barrier to radial oxygen loss impedes the apoplastic entry of iron into the roots of Urochloa humidicola.

Lack of O2 and high concentrations of iron (Fe) and manganese (Mn) commonly occur in waterlogged soils. The development of a barrier to impede radial O2 loss (ROL) is a key trait improving internal O2 transport and waterlogging tolerance in plants. We evaluated the ability of the barrier to ROL to impede the entry of excess Fe into the roots of the waterlogging-tolerant grass Urochloa humidicola. Plants were grown in aerated or stagnant deoxygenated nutrient solution with 5 µM or 900 µM Fe. Quantitative X-ray microanalysis was used to determine cell-specific Fe concentrations at two positions behind the root apex in relation to ROL and the formation of apoplastic barriers. At a mature zone of the root, Fe was 'excluded' at the exodermis where a suberized lamella was evident, a feature also associated with a strong barrier to ROL. In contrast, the potassium (K) concentration was similar in all root cells, indicating that K uptake was not affected by apoplastic barriers. The hypothesis that the formation of a tight barrier to ROL impedes the apoplastic entry of toxic concentrations of Fe into the mature zones of roots was supported by the significantly higher accumulation of Fe on the outer side of the exodermis.