Acoustic cavitation-induced microstructure evolution in ultrasonically brazed Al/Cu joints using Zn-Al alloy fillers.

Tailoring the phase constitutions of the interfacial reaction layers under the assistance of ultrasonic vibration is a convenient method to fabricate high-strength Al/Cu brazing joints. In this study, 1060-Al and T2-Cu dissimilar metals were ultrasonically brazed with Zn-3Al (wt. %) filler metals. Effects of ultrasonic brazing time on the microstructure and mechanical properties of joints were investigated. Results showed that the CuZn5 intermetallic compound (IMC) layer and Cu-based diffusion layer were created on the Cu substrate surface in the joint ultrasonically brazed at 400 ℃ for 2 s. However, the CuZn5 IMC layer was gradually transformed into a thin Al4.2Cu3.2Zn0.7 IMC layer by increasing the ultrasonic vibration time to 15 s. A well-matched coherent interface was formed between the Al4.2Cu3.2Zn0.7 ternary phase and the Cu-based diffusion layer. The phase transition of the Cu-side interfacial layer correlated closely with the acoustic cavitations induced super-saturation regions near the Cu substrate surface. The measured tensile strength of the Al/Zn-3Al/Cu joint ultrasonically brazed for 15 s was 89.3 MPa, which was approximately 2.5 times higher than that brazed for 2 s, and the tensile failure mainly occurred at the interface between the Al4.2Cu3.2Zn0.7 layer and the Cu-based diffusion layer.

Strategy to Simultaneously Manipulate Direct Zn Nucleation and Hydrogen Evolution via Surface Modifier Hydrolysis for High-Performance Zn-Ion Batteries.

The demand for safer batteries is growing rapidly due to fire incidents in electronic devices that use Li-ion batteries. Zn-ion batteries are among the most promising candidates to replace Li-ion batteries because they use a water-based electrolyte and are not explosive. However, Zn-ion batteries suffer from persistent corrosion and dendritic crystal formation during the charge-discharge process, which decrease their reversibility and hinder their commercial usage. Extensive research has been conducted to address these issues, but there are significant limitations due to high process and time costs. In this study, the modulation of the Zn-electrolyte interface to overcome these challenges is attempted using acetamide-derived thioacetamide (TAA), a surface modifier used in electroplating. TAA undergoes hydrolysis in an aqueous solution and produces weakly acidic byproducts and sulfide ions. These species are adsorbed onto the Zn metal surface, which induces uniform Zn2+ deposition, facilitates the formation of a stable interfacial layer, and inhibits side reactions due to the reduced water activity. Consequently, the symmetric cell with TAA achieves a low polarization of 50 mV and stable cycling for 700 h at 1 mA cm-2. Additionally, a Zn|V6O13 full cell exhibits electrochemical reversibility, maintaining a capacity retention of 64% over 300 cycles. Therefore, this study offers useful insights into the development of a simple manufacturing process to ensure the competitiveness of Zn-ion batteries for practical applications using functional electrolyte additives.

Two Doses of Zn Induced Different Microbiota Profiles and Dietary Zinc Supplementation Affects the Intestinal Microbial Profile, Intestinal Microarchitecture and Immune Response in Pigeons.

We aimed to explore the effects of two different doses of Zn on the fecal microbiota in pigeons and the correlation between these effects and intestinal immune status. Zn doses affected pigeon growth performance, and pigeons in the T60 (60 mg/kg Zn) and T90 (90 mg/kg Zn) groups exhibited higher villus height and crypt depth in duodenum and ileum compared to the control group, respectively. Supplementation with Zn increased the expression of the IL8, CD798, TJP and NKTR genes (p < 0.05), while enhancing serum immunoglobulin (Ig) G, IgM, and IgA concentrations compared to the control pigeons (p < 0.05). T60 treatment reduced relative Actinobacteriota abundance, while Lactobacillus spp. abundance was highest in the T90 group compared to the two other groups. The core functional genera significantly associated with immune indices in these pigeons were Rhodococcus erythropolis and Lactobacillus ponti. Our findings will help facilitate the application of dietary Zn intake in pig production.

Fe based MOF encapsulating triethylenediamine cobalt complex to prepare a FeN3-CoN3 dual-atom catalyst for efficient ORR in Zn-air batteries.

Single-atom catalysts show good oxygen reduction reaction (ORR) performance in metal-air battery. However, the symmetric electron distribution results in discontented adsorption energy of ORR intermediates and a lower ORR activity. Herein, Fe-Co dual-atom catalyst with FeN3-CoN3 configuration was prepared by encapsulating nitrogen-rich ion (triethylenediamine cobalt complex, [Co(en)3]3+) in Fe based MOF cage to greatly enhance ORR performance. Due to the confinement effect of the MOF cage, the encapsulated [Co(en)3]3+ is closer to Fe of MOF, thus easily generating FeN3-CoN3 sites. The FeN3-CoN3 sites can break the symmetric electron distribution of single-atom sites, optimizing adsorption energy of oxygen intermediate. Thus, FeCo-NC exhibits extraordinary ORR activity with a high half-wave potential of 0.915 V and 0.789 V in alkaline and acidic electrolyte, respectively, while it was 0.874 V and 0.79 V for Pt/C. The liquid and solid Zn-air batteries with FeCo-NC as cathode show higher peak power density and specific capacity. DFT results indicate that FeN3-CoN3 site can reduce the reaction energy barrier of the rate-determining step resulting in an excellent ORR performance.

Duplex Fluorinated and Atomic Layer Deposition-Derived ZrO2 Coatings Improve the Corrosion Resistance and Mechanical Properties of Mg-2Zn-0.46Y-0.5Nd (wt.%) Alloy Plates and Screws.

This study investigated the corrosion resistance and mechanical properties of Mg-2Zn-0.46Y-0.5Nd (wt.%) alloy plates and screws with fluorinated coatings and atomic layer deposition (ALD)-derived zirconia (ZrO2) coatings in vitro under physiological stress conditions. Synthetic polyurethane hemimandible replicas were split and fixed as the following three groups of magnesium alloy plates and screws: no additional surface coating treatment (Group A), with fluorinated coatings (Group B), and with duplex fluorinated and ALD-derived 100 nm ZrO2 coatings (Group C). A circulating stress of 1-10 N was applied to the distal bone segment, and a 4-week simulated body fluid immersion test was employed to study the remaining material volume and the mechanical properties of the different groups. Compared with Group A and Group B, the degradation rate of magnesium alloy plates and screws' head regions was significantly slowed down under the protection of duplex MgF2/ZrO2 coatings (p < 0.01). There was no significant difference in the degradation rate of the screw shaft region between groups (p = 0.077). In contrast to fluoride coatings, duplex MgF2/ZrO2 coatings maintained the mechanical strength of magnesium alloy plates and screws after a 14 day in vitro SBF immersion test. We conclude that duplex MgF2/ZrO2 coatings exhibited a certain protective effect on the Mg alloy plates and screws under physiological stress conditions.

Characterisation of Fe Distribution in the Liquid-Solid Boundary of Al-Zn-Mg-Si Alloy Using Synchrotron X-ray Fluorescence Microscopy.

Al-Zn-Mg-Si alloy coatings have been developed to inhibit the corrosion of cold-rolled steel sheets by offering galvanic and barrier protection to the substrate steel. It is known that Fe deposited from the steel strip modifies the microstructure of the alloy. We cast samples of Al-Zn-Mg-Si coating alloys containing 0.4 wt% Fe and directionally solidified them using a Bridgman furnace to quantify the effect of this Fe addition between 600 °C and 240 °C. By applying a temperature gradient, growth is encouraged, and by then quenching the sample in coolant, the microstructure may be frozen. These samples were analysed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) to determine the morphological effects of the Fe distribution across the experimental temperature range. However, due to the sub 1 wt% concentration of Fe, synchrotron X-ray fluorescence microscopy (XFM) was applied to quantitatively confirm the Fe distribution. Directionally solidified samples were scanned at 7.05 keV and 18.5 keV using X-ray fluorescence at the Australian Synchrotron using the Maia array detector. It was found that a mass nucleation event of the Fe-based τ6 phase occurred at 495 °C following the nucleation of the primary α-Al phase as a result of a peritectic reaction with remaining liquid.

Suitable Stereoscopic Configuration of Electrolyte Additive Enabling Highly Reversible and High-Rate Zn Anodes.

Electrolyte additive engineering is a crucial method for enhancing the performance of aqueous zinc-ion batteries (AZIBs). Recently, most research predominantly focuses on the role of functional groups in regulating electrolytes, often overlooking the impact of molecule stereoscopic configuration. Herein, two isomeric sugar alcohols, mannitol and sorbitol, are employed as electrolyte additives to investigate the impact of the stereoscopic configuration of additives on the ZnSO4 electrolyte. Experimental analysis and theoretical calculations reveal that the primary factor for improving Zn anode performance is the regulation of the solvation sheath by these additives. Among the isomers, mannitol exhibits stronger binding energies with Zn2+ ions and water molecules due to its more suitable stereoscopic configuration. These enhanced bindings allow mannitol to coordinate with Zn2+, contributing to solvation structure formation and reducing the active H2O molecules in the bulk electrolyte, resulting in suppressed parasitic reactions and inhibited dendritic growth. As a result, the zinc electrodes in mannitol-modified electrolyte exhibit excellent cycling stability of 1600 h at 1 mA cm-2 and 900 h at 10 mA cm-2, respectively. Hence, this study provides novel insights into the importance of suitable stereoscopic molecule configurations in the design of electrolyte additives for highly reversible and high-rate Zn anodes.

A Comprehensive Approach Combining Short-Chain Polyphosphate and Bacterial Biostimulants for Effective Nutrient Solubilization and Enhanced Wheat Growth.

Phosphorus constitutes a crucial macronutrient for crop growth, yet its availability often limits food production. Efficient phosphorus management is crucial for enhancing crop yields and ensuring food security. This study aimed to enhance the efficiency of a short-chain polyphosphate (PolyP) fertilizer by integrating it with plant growth-promoting bacteria (PGPB) to improve nutrient solubilization and wheat growth. Specifically, the study investigated the effects of various bacterial strains on wheat germination and growth when used in conjunction with PolyP. To achieve this, a greenhouse experiment was conducted in which the wheat rhizosphere was amended with a short-chain PolyP fertilizer. Based on the morphological aspect, eight bacteria, designated P1 to P8, were isolated and further characterized. Plant growth-promoting traits were observed in all bacterial strains, as they presented the ability to produce Indole Acetic Acid (IAA) in significant amounts ranging from 7.5 ± 0.3 µg/mL to 44.1 ± 2 µg/mL, expressed by B. tropicus P4 and P. soyae P1, respectively. They also produced ammonia, hydrogen cyanide (HCN), and siderophores. Their effect against the plant pathogen Fusarium culmorum was also assessed, with P. reinekei P2 demonstrating the highest biocontrol activity as it presented a total inhibitory effect. Additionally, some strains exhibited the ability to solubilize/hydrolyze phosphorus, potassium, and zinc. In vivo, the initial growth potential of wheat seeds indicated that those inoculated with the isolated strains exhibited elevated germination rates and enhanced root growth. Based on their plant growth-promoting traits and performance in the germination assay, three strains were selected for producing the best results, specifically phosphorus hydrolyzation/solubilization, zinc solubilization, IAA production, HCN, and siderophores production. Wheat seeds were inoculated by drenching in a bacterial suspension containing 1010 CFU/mL of log phase culture, and an in planta bioassay was conducted in a growth chamber using three selected strains (Pseudomonas soyae P1, Pseudomonas reinekei P2, and Bacillus tropicus P4), applied either individually or with PolyP on a P-deficient soil (28 mg/kg of P Olsen). Our findings demonstrated that the combination of Pseudomonas soyae P1 and PolyP achieved the highest shoot biomass, averaging 41.99 ± 0.87 g. Notably, applying P. soyae P1 or Bacillus tropicus P4 alone yielded similar results to the use of PolyP alone. At the heading growth stage, the combination of Bacillus tropicus P4 and PolyP significantly increased the Chlorophyll Content Index (CCI) to 37.02 µmol/m2, outperforming both PolyP alone (24.07 µmol/m2) and the control (23.06 µmol/m2). This study presents an innovative approach combining short-chain PolyP with bacterial biostimulants to enhance nutrient availability and plant growth. By identifying and characterizing effective bacterial strains, it offers a sustainable alternative to conventional fertilizers.

Foliar Spraying with ZnSO4 or ZnO of Vitis vinifera cv. Syrah Increases the Synthesis of Photoassimilates and Favors Winemaking.

Zinc enrichment of edible food products, through the soil and/or foliar application of fertilizers, is a strategy that can increase the contents of some nutrients, namely Zn. In this context, a workflow for agronomic enrichment with zinc was carried out on irrigated Vitis vinifera cv. Syrah, aiming to evaluate the mobilization of photoassimilates to the winegrapes and the consequences of this for winemaking. During three productive cycles, foliar applications were performed with ZnSO4 or ZnO, at concentrations ranging between 150 and 1350 g.ha-1. The normal vegetation index as well as some photosynthetic parameters indicated that the threshold of Zn toxicity was not reached; it is even worth noting that with ZnSO4, a significant increase in several cases was observed in net photosynthesis (Pn). At harvest, Zn biofortification reached a 1.2 to 2.3-fold increase with ZnSO4 and ZnO, respectively (being significant relative to the control, in two consecutive years, with ZnO at a concentration of 1350 g.ha-1). Total soluble sugars revealed higher values with grapes submitted to ZnSO4 and ZnO foliar applications, which can be advantageous for winemaking. It was concluded that foliar spraying was efficient with ZnO and ZnSO4, showing potential benefits for wine quality without evidencing negative impacts.

High-Performance Bifunctional Electrocatalysts for Flexible and Rechargeable Zn-Air Batteries: Recent Advances.

Flexible rechargeable Zn-air batteries (FZABs) exhibit high energy density, ultra-thin, lightweight, green, and safe features, and are considered as one of the ideal power sources for flexible wearable electronics. However, the slow and high overpotential oxygen reaction at the air cathode has become one of the key factors restricting the development of FZABs. The improvement of activity and stability of bifunctional catalysts has become a top priority. At the same time, FZABs should maintain the battery performance under different bending and twisting conditions, and the design of the overall structure of FZABs is also important. Based on the understanding of the three typical configurations and working principles of FZABs, this work highlights two common strategies for applying bifunctional catalysts to FZABs: 1) powder-based flexible air cathode and 2) flexible self-supported air cathode. It summarizes the recent advances in bifunctional oxygen electrocatalysts and explores the various types of catalyst structures as well as the related mechanistic understanding. Based on the latest catalyst research advances, this paper introduces and discusses various structure modulation strategies and expects to guide the synthesis and preparation of efficient bifunctional catalysts. Finally, the current status and challenges of bifunctional catalyst research in FZABs are summarized.

High-Performance Aqueous Zinc-Organic Battery with a Photo-Responsive Covalent Organic Framework Cathode.

Covalent organic framework (COF) materials, known for their robust porous character, sustainability, and abundance, have great potential as cathodes for aqueous Zn-ion batteries (ZIBs). However, their application is hindered by low reversible capacity and discharge voltage. Herein, a donor-acceptor configuration COF (NT-COF) is utilized as the cathode for ZIBs. The cell exhibits a high discharge voltage plateau of ≈1.4 V and a discharge capacity of 214 mAh g-1 at 0.2 A g-1 when utilizing the Mn2+ electrolyte additive in the ZnSO4 electrolyte. A synergistic combination mechanism is proposed, involving the deposition/dissolution reactions of Zn4SO4(OH)6·4H2O and the co-(de)insertion reactions of H+ and SO4 2- in NT-COF. Meanwhile, the NT-COF with a donor-acceptor configuration facilitates efficient generation and separation of electron-hole pairs upon light exposure, thereby enhancing electrochemical reactions within the battery. This leads to a reduction in charging voltage and internal overvoltage, ultimately minimizing electricity consumption. Under ambient weather conditions, the cell exhibits an average discharge capacity of 430 mAh g-1 on sunny days and maintains consistent cycling stability for a duration of 200 cycles (≈19 days) at 0.2 A g-1. This research inspires the advancement of Zn-organic batteries for high-energy-density aqueous electrochemical energy storage systems or photo-electrochemical batteries.

Design of Atomically Dispersed CoN4 Sites and Co Clusters for Synergistically Enhanced Oxygen Reduction Electrocatalysis.

Constructing dual-site catalysts consisting of atomically dispersed metal single atoms and metal atomic clusters (MACs) is a promising approach to further boost the catalytic activity for oxygen reduction reaction (ORR). Herein, a porous CoSA-AC@SNC featuring the coexistence of Co single-atom sites (CoN4) and S-coordinated Co atomic clusters (SCo6) in S, N co-doped carbon substrate is successfully synthesized by using porphyrinic metal-organic framework (Co-TPyP MOF) as the precursor. The introduction of the sulfur source creates abundant microstructural defects to anchor Co metal clusters, thus modulating the electronic structure of its surrounding carbon substrate. The synergistic effect between the two types of active sites and structural advantages, in turn, results in high ORR performance of CoSA-AC@SNC with half-wave potential (E1/2) of 0.86 V and Tafel slope of 50.17 mV dec-1. Density functional theory (DFT) calculations also support the synergistic effect between CoN4 and SCo6 by detailing the catalytic mechanism for the improved ORR performance. The as-fabricated Zn-air battery (ZAB) using CoSA-AC@SNC demonstrates impressive peak power density of 174.1 mW cm-2 and charge/discharge durability for 148 h. This work provides a facile synthesis route for dual-site catalysts and can be extended to the development of other efficient atomically dispersed metal-based electrocatalysts.

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment.

Antimony selenide (Sb2Se3) has sparked significant interest in high-efficiency photovoltaic applications due to its advantageous material and optoelectronic properties. In recent years, there has been considerable development in this area. Nonetheless, defects and suboptimal [hk0] crystal orientation expressively limit further device efficiency enhancement. This study used Zinc (Zn) to adjust the interfacial energy band and strengthen carrier transport. For the first time, it is discovered that the diffusion of Zn in the cadmium sulfide (CdS) buffer layer can affect the crystalline orientation of the Sb2Se3 thin films in the superstrate structure. The effect of Zn diffusion on the morphology of Sb2Se3 thin films with CdxZn1-xS buffer layer has been investigated in detail. Additionally, Zn doping promotes forming Sb2Se3 thin films with the desired [hk1] orientation, resulting in denser and larger grain sizes which will eventually regulate the defect density. Finally, based on the energy band structure and high-quality Sb2Se3 thin films, this study achieves a champion power conversion efficiency (PCE) of 8.76%, with a VOC of 458 mV, a JSC of 28.13 mA cm-2, and an FF of 67.85%. Overall, this study explores the growth mechanism of Sb2Se3 thin films, which can lead to further improvements in the efficiency of Sb2Se3 solar cells.

Bioformulation of mineral solubilizing microbes as novel microbial consortium for the growth promotion of wheat (Triticum aestivum) under the controlled and natural conditions.

Microbes are a worthwhile organism of the earth that could be formulated as consortium which can be utilized as biofertilizers. Consortium-based bioinoculants or biofertilizers are superior to single strain-based inoculants for sustainable agricultural productivity and increased micronutrient content in yield. The aim of present study was to evaluate the effect of different combinations of beneficial bacteria that are more effective than single-based bioinoculants. The current work focuses on the isolation of rhizospheric microorganisms from various cereals and pseudocereal crops and the development of a single inoculum as well as a bacterial consortium which were evaluated on wheat crop. A total 214 rhizospheric bacteria were sorted out and, screened for mineral solubilizing attributes i.e., phosphorus, potassium, zinc and selenium solubilization. Among all the bacterial isolates, four potential strains exhibiting P, K, Zn and Se-solubilizing attributes were identified with the help of 16S rRNA gene sequencing as Rahnella aquatilis EU-A3Rb1, Erwinia aphidicola EU-A2RNL1, Brevibacillus brevis EU-C3SK2, and Bacillus mycoides EU-WRSe4, respectively. The identified strains formulated as a consortium which were found to improve the plant growth and physiological parameters in comparison to single culture inoculants and control. To the best of our knowledge, the present investigation is the first report that has developed the consortium from bacterial strains Rahnella aquatilis EU-A3Rb1, Erwinia aphidicola EU-A2RNL1, Brevibacillus brevis EU-C3SK2, and Bacillus mycoides EU-WRSe4. A combination of bacterial strains could be used as liquid inoculants for cereal crops growing in mountainous regions.

A Protective Layer of UIO-66/Reduced Graphene Oxide to Stabilize Zinc-Metal Anodes toward High-Performance Aqueous Zinc-Ion Batteries.

Rechargeable aqueous Zn-ion batteries with a Zn anode hold great promise as promising candidates for advanced energy storage systems. The construction of protective layer coatings on Zn anode is an effective way to suppress the growth of Zn dendrites and water-induced side reactions. Herein, we reported a series of UIO-66 materials with different concentrations of reduced graphene oxide (rG) coated onto the surface of Zn foil (Zn@UIO-66/rGx; x = 0.05, 0.1, and 0.2). Benefiting from the synergistic effect of UIO-66 and rG, symmetric cells with Zn@UIO-66/rGx (x = 0.1) electrodes exhibit excellent reversibility (e.g., long cycling life over 1100 h at 1 mA cm-2/1 mAh cm-2) and superior rate capability (e.g., over 1100 and 400 h at 5 mA cm-2/2.5 mAh cm-2 and 10 mA cm-2/5 mAh cm-2, respectively). When the Zn@UIO-66/rG0.1 anode was paired with the NaV3O8·1.5H2O (NVO) cathode, the Zn@UIO-66/rG0.1||NVO cell also delivered a high reversible capacity of 189.9 mAh g-1 with an initial capacity retention of 61.3% after 500 cycles at 1 A g-1, compared to the bare Zn||NVO cell with only 92 cycles.

A Rechargeable "Rocking Chair" Type Zn-CO2 Battery.

Rising global temperatures and critical energy shortages have spurred researches into CO2 fixation and conversion within the realm of energy storage such as Zn-CO2 batteries. However, traditional Zn-CO2 batteries employ double-compartment electrolytic cells with separate carriers for catholytes and anolytes, diverging from the "rocking chair" battery mechanism. The specific energy of these conventional batteries is constrained by the solubility of discharge reactants/products in the electrolyte. Additionally, H2O molecules tend to trigger parasitic reactions at the electrolyte/electrode interfaces, undermining the long-term stability of Zn anodes. In this report, we introduce an innovative "rocking chair" type Zn-CO2 battery that utilizes a weak-acidic Zn(OTf)2 aqueous electrolyte compatible with both cathode and anode. This design minimizes side reactions on the Zn surface and leverages the high catalytic activity of the cathode material, allowing the battery to achieve a substantial discharge capacity of 6734 mAh g-1 and maintain performance over 65 cycles. Moreover, the successful production of pouch cells demonstrates the practical applicability of Zn-CO2 batteries. Electrode characterizations confirm superior electrochemical reversibility, facilitated by solid discharge products of ZnCO3 and C. This work advances a "rocking chair" Zn-CO2 battery with enhanced specific energy and a reversible pathway, providing a foundation for developing high-performance metal-CO2 batteries.

S-Block Metal Mg-Mediated Co─N─C as Efficient Oxygen Electrocatalyst for Durable and Temperature-Adapted Zn-Air Batteries.

In the quest to enhance Zn-air batteries (ZABs) for operating across a wide spectrum of temperatures, synthesizing robust oxygen electrocatalysts is paramount. Conventional strategies focusing on orbital hybridization of d-d and p-d aim to moderate the excessive interaction between the d-band of the transition metal active site and oxygen intermediate, yet often yield suboptimal performance. Herein, an innovative s-block metal modulation is reported to refine the electronic structure and catalytic behavior of Co─NC catalysts. Employing density functional theory (DFT) calculations, it is revealed that incorporating Mg markedly depresses the d-band center of Co sites, thereby fine-tuning the adsorption energy of the oxygen reduction reaction (ORR) intermediate. Consequently, the Mg-modified Co─NC catalyst (MgCo─NC) unveils remarkable intrinsic ORR activity with a significantly reduced activation energy (Ea) of 10.0 kJ mol-1, outstripping the performance of both Co─NC (17.6 kJ mol-1), benchmark Pt/C (15.9 kJ mol-1), and many recent reports. Moreover, ZABs outfitted with the finely tuned Mg0.1Co0.9─NC realize a formidable power density of 157.0 mW cm-2, paired with an extremely long cycle life of 1700 h, and an exceptionally minimal voltage gap decay rate of 0.006 mV h-1. Further, the Mg0.1Co0.9─NC-based flexible ZAB presents a mere 2% specific capacity degradation when the temperature fluctuates from 25 to -20 °C, underscoring its robustness and suitability for practical deployment in diverse environmental conditions.

3D Porous Fibers with Spatial Traps and Excellent Zn2+ Transport Kinetics Enable Stable Zn-Based Aqueous Battery.

Adverse side reactions and uncontrolled Zn dendrites growth are the dominant factors that have restricted the application of Zn ion batteries. Herein, a 3D self-supporting porous carbon fibers (denoted as PCFs) host is developed with "trap" effect to adjust the Zn deposition. The unique open structural design of N-doped carbon can act as the zincophilic sites to induce uniform deposition and inhibit adverse side reactions. More importantly, the porous hollow PCFs host with "trap" effect can induce Zn deposition in the fiber by adjusting the local electric field and current density, thereby increasing the specific energy density of the battery and inhibiting dendrite growth. In addition, the 3D open frameworks can regulate Zn2+ flux to enable outstanding cycling performance at ultra-high current densities. As expected, the PCFs framework guarantees the uniform Zn plating and stripping with an outstanding stability over 6000 cycles at the current density of 40 mA cm-2. And the Zn@PCFs||MnO2 full battery shows an excellent lifespan over 1300 cycles at 2000 mA g-1.

Bimetal Oxides Anchored on Carbon Nanotubes/Nanosheets as High-Efficiency and Durable Bifunctional Oxygen Catalyst for Advanced Zn-Air Battery: Experiments and DFT Calculations.

To meet increasing requirement for innovative energy storage and conversion technology, it is urgent to prepare effective, affordable, and long-term stable oxygen electrocatalysts to replace precious metal-based counterparts. Herein, a two-step pyrolysis strategy is developed for controlled synthesis of Fe2O3 and Mn3O4 anchored on carbon nanotubes/nanosheets (Fe2O3-Mn3O4-CNTs/NSs). The typical catalyst has a high half-wave potential (E1/2 = 0.87 V) for oxygen reduction reaction (ORR), accompanied with a smaller overpotential (η10 = 290 mV) for oxygen evolution reaction (OER), showing substantial improvement in the ORR and OER performances. As well, density functional theory calculations are performed to illustrate the catalytic mechanism, where the in situ generated Fe2O3 directly correlates to the reduced energy barrier, rather than Mn3O4. The Fe2O3-Mn3O4-CNTs/NSs-based Zn-air battery exhibits a high-power density (153 mW cm-2) and satisfyingly long durability (1650 charge/discharge cycles/550 h). This work provides a new reference for preparation of highly reversible oxygen conversion catalysts.

Non-Epitaxial Electrodeposition of Overall 99% (002) Plane Achieves Extreme and Direct Utilization of 95% Zn Anode and By-Product as Cathode.

Zn anode protection in Zn-ion batteries (ZIBs) face great challenges of high Zn utilization rate (i.e., depth of discharge, DOD) and high current density due to the large difficulty in obtaining an extreme overall RTC (relative texture coefficient) of Zn (002) plane. Through the potent interaction of Mn(III)aq and H+ with distinct Zn crystal planes under an electric field, large-size Zn foils with a breakthrough (002) plane RTC of 99% (i.e., close to Zn single crystal) are electrodeposited on texture-less substrates, which is also applicable from recycled Zn. The ultra-high (002) plane RTC remarkably enhances cyclic performance of the Zn anode (70% DOD @ 45.5 mA cm-2), and the DOD is even up to 95% (@ 28.1 mA cm-2) with an electrolyte additive of polyaniline. Furthermore, MnO2, the by-product of electrodeposition, is directly used as cathode of both coin cell and pouch battery, surpassing the cyclic performance exhibited by the majority of Zn||MnO2 batteries in previous instances. These results demonstrate the great potential of our strategy for high-performance, low-cost and large-scale ZIBs.