Ultraviolet spectrophotometry as method to determine the concentration of ß-myrcene released from chitosan in aqueous medium.

Myrcene (ß-myrcene), found in essential oils from plant species such as hops and cannabis, has many advantageous properties, but its use is limited due to volatility and low solubility in water. One way to circumvent these limitations is to encapsulate the essential oils in a polymer matrix. However, these hydrophobic molecules are difficult to quantify when dispersed in water. Seeking to study the release of this terpene in drug release tests from polymeric matrices, this work aimed to develop an easy and cheap UV spectrophotometric method for the quantification of ß-myrcene in aqueous medium. To achieves this goal, samples were prepared in 0.05% (w/v) polysorbate 80 solution, with concentrations of ß-myrcene ranging from 0.01% to 0.1% (v/v), and were analyzed at 226 nm. Each sample was analyzed in triplicate and repeated on three different days, to evaluate the repeatability of the results. The results were subjected to Q, F and Student's t-tests. The regression parameters obtained for ß-myrcene were above 0.99 and through statistical analysis, it was possible to confirm the repeatability for the results. The values of the limits of detection and quantification indicated that the method is not affected by intrinsic factors of the equipment. The results of accuracy, robustness and selectivity showed recovery rates within acceptable limits. This demonstrates that the quantification of ß-myrcene in aqueous medium by UV spectrophotometry is feasible.

Calixarenes and cyclodextrins as off- and on-fluorescence probes for carbazole.

Absorption and fluorescence spectra of the nitrogen polycyclic aromatic hydrocarbon carbazole (CZL) were analyzed with native cyclodextrins (CD;α,ß,γ); derivatizedCD(hydroxypropyl-ß-cyclodextrin,HPCD; methyl-ß-cyclodextrin,MeCD) and p-sulfonated calixarenes (SCAn, with n = 6 and 8) macrocycles. The results showed a slight increase in the absorbance ofCZLwithCD, but the mixture ofCZLwithSCAshowed lower absorption than the sum of the individual spectra. Also, changes in fluorescence were observed by adding the macrocycles, quenching withSCA, and significant increases withCD. The higher fluorescence enhancement was withHPCDrationalized as a complex formation with 1:1 stoichiometry, with an average value for the association constant (KA) of (12 ± 1) x 102M-1, and a quantum yield ratio between the complexedCZLand freeCZL(ΦCZL-HPCD/ΦCZL) of (1.56 ± 0.02) at neutral pH and 25.0 °C. These increases in fluorescence were used as an on-fluorescence switch to develop a supramolecular analytical method forCZLin aqueous samples. The best analytical parameters were inHPCD(LOD = 1.41 ± 0.01 ng mL-1). The method was validated in aqueous samples of river and tap water with recoveries between 96%-104%. The proposed supramolecular method is quick, direct, selective and represents an alternative and low-cost analysis method.

Development and validation of a versatile analytical method for absolute quantification of seven oligosaccharides in human, bovine, and goat milk.

Oligosaccharides are significant in mammalian milk, where they serve as prebiotics that promote the growth of beneficial gut bacteria in infants. Comprehensive research of milk oligosaccharides requires precise and validated analytical methods for compositional studies. To address this need, the focus of our study was to develop and validate an analytical method using UPLC-MS/MS to quantify seven specific oligosaccharides found in mammalian milk. The developed and optimized method has adequate linearity, accuracy, and precision parameters. The detection (LOD) and quantification (LOQ) limits for the seven compounds ranged from 0.0018 to 0.0030 µg/mL and 0.0054-0.0063 µg/mL, respectively. The sample preparation method yielded recovery rates above 90.5 %. Furthermore, no significant matrix effect was observed. The validated method was successfully applied to human, goat, and bovine milk samples, demonstrating its proficiency in identifying variances in the concentration of oligosaccharides across different mammals. This versatile method will allow future research about factors affecting oligosaccharide composition.

A Validated HPLC-UV-ESI-IT-MS Method for the Quantification of Carnosol in Lepechinia mutica, a Medicinal Plant Endemic to Ecuador.

The diphenolic diterpene carnosol was isolated from several species of the family Lamiaceae, including Lepechinia mutica, a medicinal plant endemic to Ecuador. The compound has exhibited high antioxidant, anti-inflammatory, antimicrobial, neuroprotective, and antifungal properties, as well as promising cytotoxicity against prostate, breast, skin, leukemia, and human colon cancer cell lines. In this paper, we developed and validated a simple, accurate, and reliable analytical HPLC-UV-ESI-IT-MS method, carried out on a C18 column, which is potentially suitable to quantify carnosol in plant extracts. The procedure complied with the established ICH validation parameters of analytical range (linearity in the range of 0.19-5.64 µg/g dried leaves; REAVERGE = 4.9%; R2 = 0.99907), analysis repeatability (RSD = 2.8-3.6%), intermediate precision (RSD = 1.9-3.6%), accuracy (estimated as % carnosol recovery in the range of 81 to 108%), and robustness. Finally, the LOD (0.04 µg/mg) and LOQ (0.19 µg/mg) values of carnosol/dried leaves were determined. Using this validated method, the content of carnosol in L. mutica was estimated to be 0.81 ± 0.04 mg/g of dried leaves (0.081%).

The bitter side of teas: Pesticide residues and their impact on human health.

Tea (Camellia sinensis) is one of the most widely consumed non-alcoholic beverages globally, known for its rich composition of bioactive compounds that offer various health benefits to humans. However, the cultivation of tea plants often faces challenges due to their high vulnerability to pests and diseases, resulting in the heavy use of pesticides. Consequently, pesticide residues can be transferred to tea leaves, compromising their quality and safety and potentially posing risks to human health, including hormonal and reproductive disorders and cancer development. In light of these concerns, this review aims to: (I) present the maximum limits of pesticide residues established by different international regulatory agencies; (II) explore the characteristics of pesticides commonly employed in tea cultivation, encompassing aspects such as digestion, bioaccessibility, and the behavior of pesticide transfer; and (III) discuss the effectiveness of detection and removal methods for pesticides, the impacts of pesticides on both tea plants and human health and investigate emerging alternatives to replace these substances. By addressing these critical aspects, this review provides valuable insights into the management of pesticide residues in tea production, with the goal of ensuring the production of safe, high-quality tea while minimizing adverse effects on human health.

Osmoprotectants play a major role in the Portulaca oleracea resistance to high levels of salinity stress-insights from a metabolomics and proteomics integrated approach.

Introduction: Purslane (Portulaca oleracea L.) is a non-conventional food plant used extensively in folk medicine and classified as a multipurpose plant species, serving as a source of features of direct importance to the agricultural and agri-industrial sectors. This species is considered a suitable model to study the mechanisms behind resistance to several abiotic stresses including salinity. The recently achieved technological developments in high-throughput biology opened a new window of opportunity to gain additional insights on purslane resistance to salinity stress-a complex, multigenic, and still not well-understood trait. Only a few reports on single-omics analysis (SOA) of purslane are available, and only one multi-omics integration (MOI) analysis exists so far integrating distinct omics platforms (transcriptomics and metabolomics) to characterize the response of purslane plants to salinity stress. Methods: The present study is a second step in building a robust database on the morpho-physiological and molecular responses purslane to salinity stress and its subsequent use in attempting to decode the genetics behind its resistance to this abiotic stress. Here, the characterization of the morpho-physiological responses of adult purslane plants to salinity stress and a metabolomics and proteomics integrative approach to study the changes at the molecular level in their leaves and roots is presented. Results and discussion: Adult plants of the B1 purslane accession lost approximately 50% of the fresh and dry weight (from shoots and roots) whensubmitted to very high salinity stress (2.0 g of NaCl/100 g of the substrate). The resistance to very high levels of salinity stress increases as the purslane plant matures, and most of the absorbed sodium remains in the roots, with only a part (~12%) reaching the shoots. Crystal-like structures, constituted mainly by Na+, Cl-, and K+, were found in the leaf veins and intercellular space near the stoma, indicating that this species has a mechanism of salt exclusion operating on the leaves, which has its role in salt tolerance. The MOI approach showed that 41 metabolites were statistically significant on the leaves and 65 metabolites on the roots of adult purslane plants. The combination of the mummichog algorithm and metabolomics database comparison revealed that the glycine, serine, and threonine, amino sugar and nucleotide sugar, and glycolysis/gluconeogenesis pathways were the most significantly enriched pathways when considering the total number of occurrences in the leaves (with 14, 13, and 13, respectively) and roots (all with eight) of adult plants; and that purslane plants employ the adaptive mechanism of osmoprotection to mitigate the negative effect of very high levels of salinity stress; and that this mechanism is prevalent in the leaves. The multi-omics database built by our group underwent a screen for salt-responsive genes, which are now under further characterization for their potential to promote resistance to salinity stress when heterologously overexpressed in salt-sensitive plants.

Development and validation of an LC-MS/MS method to quantify ceftaroline in microdialysate samples from plasma and brain: Application to a preclinical pharmacokinetic investigation.

A bioanalytical LC-MS/MS method was developed and validated to determine ceftaroline in microdialysate samples from plasma and brain. Ceftaroline was separated using a C18 column and a mobile phase consisting of water and acetonitrile, both with 5 mM of ammonium formate and acid formic 0.1%, eluted as gradient. Ceftaroline was monitored using electrospray ionization operating on positive mode (ESI+) monitoring the transition 604.89 > 209.3 m/z. The method showed linearity in the concentration range of 0.5-500 ng/mL for brain microdialysate and 0.5-2500 ng/mL for plasma microdialysate with coefficients of determination ≥0.997. The inter-and intra-day precision, the accuracy, and the stability of the drug in different conditions were in accordance with the acceptable limits determined by international guidelines. Plasma pharmacokinetics and brain distribution of the drug were carried out after intravenous administration of 20 mg/kg of ceftaroline to male Wistar rats. The estimated geometric mean (geometric coefficient of variation) area under the curve (AUC0-∞) was 4.68 (45.8%) mg·h/L and 1.20 (54.2%) mg·h/L for plasma and brain, respectively, resulting in a brain exposure of about 33% (AUCfree brain/AUCfree plasma). The results indicate that ceftaroline presents good penetration in the brain when considering free plasma and free brain concentrations.

A Semi-Analytical Method for Channel and Pipe Flows for the Linear Phan-Thien-Tanner Fluid Model with a Solvent Contribution.

This work presents a semi-analytical method for laminar steady-state channel and pipe flows of viscoelastic fluids using the Linear Phan-Thien-Tanner (LPTT) constitutive equation, with solvent viscosity contribution. For the semi-analytical method validation, it compares its results and two analytical solutions: the Oldroyd-B model and the simplified LPTT model (without solvent viscosity contribution). The results adopted different values of the dimensionless parameters, showing their influence on the viscoelastic fluid flow. The results include the distribution of the streamwise velocity component and the extra-stress tensor components in the wall-normal direction. In order to investigate the proposed semi-analytical method, different solutions were obtained, both for channel and pipe flows, considering different values of Reynolds number, solvent viscosity contribution in the homogeneous mixture, elongational parameter, shear parameter, and Weissenberg number. The results show that the proposed semi-analytical method can find a laminar solution using the non-Newtonian LPTT model with solvent viscosity contribution and verify the effect of the parameters in the resulting flow field.

Functionalized graphene quantum dots obtained from graphene foams used for highly selective detection of Hg2+ in real samples.

Here we report the use of graphene quantum dots (GQDs), obtained from 3D graphene foam, functionalized with 8-hydroxyquinoline (8-HQ) for the sensitive and selective detection of Hg2+ via front-face fluorescence. The great surface area and active groups within the GQDs permitted the functionalization with 8-HQ to increase their selectivity toward the analyte of interest. The fluorescence probe follows the Stern-Volmer model, yielding a direct relationship between the degree of quenching and the concentration of the analyte. Diverse parameters, including the pH and the use of masking agents, were optimized in order to improve the selectivity toward Hg2+ down to a limit of detection of 2.4 nmol L-1. It is hereby demonstrated that the functionalized GQDs work perfectly fine under adverse conditions such as acidic pH and in the presence of a large number of cationic and anionic interferences for the detection of Hg2+ in real samples. Parallel measurements using cold vapor atomic fluorescence spectrometry also demonstrated an excellent correlation with the front-face fluorescence method applied here for real samples including tap, river, underground, and dam waters.

Rapid determination of L-ascorbic acid content in vitamin C serums by ultra-high-performance liquid chromatography-tandem mass spectrometry.

OBJECTIVE: This study aimed to develop and validate a rapid, simple, accurate and precise analytical method for the quantification of L-AA in vitamin C serums. Moreover, the developed method was further applied to determine L-AA in eight different brands of vitamin C serums. A complementary study was also carried out to evaluate the stability of L-AA in the vitamin C serum samples after 15, 30, 45 and 60 days of storage at ambient temperature (15-35°C). METHODS: Ultra-high-performance liquid chromatography-tandem mass spectrometry was applied. RESULTS: Quantitative analyses were performed with a total chromatographic run time of 1.5 min by matrix-matched calibration, and the analytical curve was linear over the range of 1-1700 µg L-1 with a correlation coefficient of 0.9998. The limits of detection (LOD) and quantification (LOQ) were 0.3 and 1.0 µg L-1 , respectively. Intra- and inter-assay precisions, expressed in terms of relative standard deviation, ranged from 0.3% and 2.2%, respectively, and recoveries in concentration levels of 1 and 5 µg L-1 were 103.9% and 101.2%, respectively. The proposed analytical method was successfully applied to determine the L-AA content in eight commercial vitamin C serum samples. The stability of the target analyte in samples stored at ambient temperature (15-35°C) was evaluated throughout 60 days with a 15-day interval between analyses. At 0 days, L-AA content in samples ranged from 1.05 to 169.91 mg L-1 , which decreases over time. CONCLUSION: The proposed method could be powerful in routine analyses to ensure the quantification of L-AA in vitamin C serums since it proved to be a simple, reliable, fast, precise, accurate and sensitive analytical method.

OBJECTIF: Cette étude visait à développer et valider une méthode analytique rapide, simple, exacte et précise pour la quantification de l'acide L-ascorbique dans les sérums à la vitamine C. De plus, la méthode développée a été appliquée pour déterminer l'acide L-ascorbique dans huit différentes marques de sérums à la vitamine C. Une étude complémentaire a également été réalisée pour évaluer la stabilité de l'acide L-ascorbique dans les échantillons de sérum à la vitamine C après 15, 30, 45 et 60 jours de conservation à température ambiante (15 à 35 °C). MÉTHODES: La chromatographie en phase liquide à haute performance avec spectrométrie de masse en tandem a été employée. RÉSULTATS: Des analyses quantitatives ont été réalisées avec une durée totale d'exécution chromatographique de 1,5 minute par calibration matricielle appariée, et la courbe analytique était linéaire sur la plage de 1 à 1700 µg L-1 avec un coefficient de corrélation de 0,9998. La limite de détection (LD) et la limite de quantification (LQ) ont été déterminées à 0,3 et 1,0 µg L−1 , respectivement. Les précisions intra- et inter-essais, exprimées en termes d'écart-type relatif, étaient de 0,3 % et 2,2 %, respectivement, et les récupérations aux niveaux de concentration de 1 et 5 µg L-1 étaient de 103,9 % et 101,2 %, respectivement. La méthode analytique proposée a été employée avec succès pour déterminer la teneur en acide L-ascorbique de huit échantillons de sérum à la vitamine C commerciaux. La stabilité de l'analyte cible dans les échantillons conservés à température ambiante (15 à 35 °C) a été évaluée sur 60 jours avec un intervalle de 15 jours entre les analyses. À 0 jour, la teneur en acide L-ascorbique dans les échantillons était comprise entre 1,05 et 169,91 µg L-1 , ce qui diminue au fil du temps. CONCLUSION: La méthode proposée pourrait être puissante dans les analyses de routine pour assurer la quantification de l'acide L-ascorbique dans les sérums à la vitamine C puisqu'elle s'est avérée être une méthode analytique simple, fiable, rapide, précise, exacte et sensible.

Hypoglycemic effect of rosmarinic acid-rich infusion (RosCE) from Origanum vulgare in alloxan-induced diabetic rats.

Origanum vulgare, known for its medicinal value, is officially accepted in many countries. The flowers and leaves are used globally in homeopathy. In Brazilian folk medicine, O. vulgare has been used to treat diabetes mellitus. This study evaluated the hypoglycemic activity of an infusion extract (RosCE) of commercially available O. vulgare leaves in alloxan-induced diabetic rats. Oral administration of RosCE resulted in the reduction of blood glucose levels after the first day of treatment, compared to the diabetic control group. These results showed that RosCE displays hypoglycemic activity, which may be due to the combined effect of rosmarinic acid, and other minor compounds. Reversed phase-high performance liquid chromatography-diode array detection was used to identify and quantify the major constituents of RosCE. This study presents evidence that supports the folkloric use of O. vulgare for the treatment of hyperglycemia, confirming the use of its infusion as an antidiabetic herbal medicine.

Application of capillary zone electrophoresis to determine second-generation H1 antihistaminic drugs, loratadine and rupatadine

Abstract The second generation of H1 antihistamines from the piperidine group are often used for treating allergic diseases due to their action on histaminic receptors, the primary mediator of allergy. Moreover, the antihistamines have anti-inflammatory action, mediated through platelet-activating factor blocking activity. A simple and rapid capillary zone electrophoresis method was developed and validated for the determination of loratadine (LOR) and rupatadine (RUP) in tablets. The analyses were carried out using a fused silica capillary of 50.2 cm (40 cm effective length), 75 µm i.d. The background electrolyte was composed of boric acid 35 mmol/L, pH 2.5. Voltage of 20 kV, hydrodynamic injection of 3447.3 Pa for 3s, temperature at 25 ºC, and UV detection at 205 nm were applied. Electrophoretic separation was achieved at 1.8 and 2.8 min for RUP and LOR, respectively. The method was linear for both drugs in a range of 50.0 to 400.0 µg/mL (r>0.99). The limits of detection and quantification were 46.37 and 140.52 µg/mL, for LOR and 29.60 and 89.69 µg/mL for RUP respectively. The precision was less than 5.0 % for both drugs. The average recovery was approximately 100 %. The proposed novel method can significantly contribute to the rapid detection of counterfeit products and in quality control of drug products containing antihistamines

Oil field-produced water treatment: characterization, photochemical systems, and combined processes.

Produced water, a mixture of inorganic and organic components, comprises the largest effluent stream from oil and gas activities. The removal of contaminants from this wastewater is receiving special attention of the researchers since most of them are persistent and difficult to remove with simple techniques. Several technologies from conventional to advanced oxidation processes have been employed to treat produced water. However, the achievement of greater efficiency may be conditioned to a combination of different wastewater treatment techniques. Hereupon, the present paper discusses three important aspects regarding produced water treatment: analytical methods used for characterization, relevant aspects regarding photochemical systems used for advanced oxidation processes, and combined techniques for treating oil field wastewaters. Analytical methods employed for the quantification of the main species contained in produced water are presented for a proper characterization. Photochemical aspects of the reaction systems such as operating conditions, types of irradiation sources, and technical details of reactors are also addressed. Finally, research papers concerning combined treatment techniques are discussed focusing on the essential contributions. Thus, this manuscript aims to assist in the development of novel techniques and the improvement of produced water treatment to obtain a high-quality treated effluent and reduce environmental impacts.

Validation of an Analytical Method for the Simultaneous Determination of Hyaluronic Acid Concentration and Molecular Weight by Size-Exclusion Chromatography.

The hyaluronic acid (HA) global market growth can be attributed to its use in medical, cosmetic, and pharmaceutical applications; thus, it is important to have validated, analytical methods to ensure confidence and security of its use (and to save time and resources). In this work, a size-exclusion chromatography method (HPLC-SEC) was validated to determine the concentration and molecular distribution of HA simultaneously. Analytical curves were developed for concentration and molecular weight in the ranges of 100-1000 mg/L and 0.011-2.200 MDa, respectively. The HPLC-SEC method showed repeatability and reproducibility greater than 98% and limits of detection and quantification of 12 and 42 mg/L, respectively, and was successfully applied to the analysis of HA from a bacterial culture, as well as cosmetic, and pharmaceutical products.

Isolation of diterpenes from Araucaria sp Brazilian brown propolis and development of a validated high-performance liquid chromatography method for its analysis.

Propolis comprises a complex resinous product composed of plant's parts or exudates, pollen, bee wax, and enzymes. Brazilian brown propolis from Araucaria sp displays several biological activities. Considering the lack of validated analytical methods for its analysis, we are reporting the development of a validated high-performance liquid chromatography with photodiode array detector method to analyze Araucaria brown propolis. The crude propolis were extracted and chromatographed, furnishing six main diterpenes. The isolated standards were used to draw the analytical curves, allowing the studies of selectivity, precision, accuracy, recovery, robustness, the determination of limits of detection and limits of quantification. The mobile phase consisted of 0.1% acetic acid in water and acetonitrile, using an octadecylsilane column, 1 mL/min flow rate and detection at 200 or 241 nm. Relative standard deviation values obtained for intra-day and inter-day precision were lower than 4% for all diterpenes. From the five parameters for robustness, wavelength detection and flow rate were the critical ones. Limits of detection and quantification ranged from 0.808 to 10.359 µg/mL and from 2.448 to 31.392 µg/mL, respectively. The recoveries were between 105.03 and 108.13%, with relative standard deviation values around 5.0%. The developed method is precise, sensitive, and reliable for analyzing Araucaria brown propolis.

Brazilian southeast brown propolis: gas chromatography method development for its volatile oil analysis, its antimicrobial and leishmanicidal activities evaluation.

INTRODUCTION: Propolis is widely used in folk medicine, and many factors can affect its chemical composition, including abiotic factors that can influence plants and bees. Therefore, analytical methods are powerful techniques in the quality control of such products. OBJECTIVE: Develop and validate an analytical method for quantifying volatile compounds in Brazilian brown propolis, and evaluate its biological activities. METHODS: A gas chromatography flame ionisation detector (GC-FID) analytical method was validated, attending the parameters of international validation guidelines as ANVISA 2017 and ICH 2005, for quantification of compounds present in volatile oils from propolis. Evaluation of cytotoxic, antimicrobial, and leishmanicidal activities of the oil. RESULTS: The compounds 1,8-cineole, terpinen-4-ol, α-copaene, ß-caryophyllene, γ-muurolene, nerolidol, spathulenol, and γ-palmitolactone were isolated from the volatile fraction of a Brazilian brown propolis and used in the method validation. All the validation parameters of the method were satisfactory. The volatile fraction displayed a significant leishmanicidal activity, with half maximal inhibition concentration (IC50 ) = 21.3 µg/mL against amastigote forms and IC50 = 25.1 µg/mL against promastigote forms of Leishmania amazonensis. The oil also displayed an antibacterial effect by inhibiting the growth of Streptococcus mutans and Staphylococcus aureus at 25 µg/mL and 50 µg/mL, respectively, but it was not cytotoxic against AGP-01, He-La and CHO-K1cell lines, with IC50 > 100 µg/mL. CONCLUSION: The GC-FID method can be a useful tool in the quality control of propolis material. The southeast brown propolis showed a high chemical complexity in its volatile fraction, which displayed leishmanicidal activity and bactericidal activity.

A new highly selective colorimetric Schiff base chemosensor for determining the copper content in artisanal cachaças.

This work demonstrated the feasibility of applying the Schiff base 5-bromo-2-salicyl-beta-alanine as a colorimetric chemosensor for the spectrophotometric quantification of the copper content in artisanal cachaças. For this, the experimental conditions were optimized to obtain an efficient, sensitive, reversible, and highly selective chemosensor to Cu2+ ions. The complex stoichiometry was 1:1, with a formation constant of 5.82 × 102 L mol-1 and molar absorptivity of 5.82 × 103 mol L-1 cm-1. Then, a spectrophotometric analytical method was developed and validated according to the Brazilian legislation. The linearity of the analytical curve was demonstrated by ANOVA, at a confidence level of 95%. The limits of detection and quantification were 0.0659 and 0.200 mg L-1, respectively. The coefficients of variation for both the intra- and inter-day precisions were lower than 3.83%, and the accuracy presented a mean recovery of 100.55 ±â€¯2.87%. The absence of a matrix effect was confirmed by the standard addition method, and the copper content in three artisanal cachaças from different geographical origins was estimated as lower than 2.93 mg L-1. This result was in accordance with the Brazilian legislation but reinforces the need to carry out stricter quality control to achieve exportation standards. Therefore, the proposed method can be considered a simple, selective, linear, precise, and accurate tool that involves only a simple complexation reaction through the addition of the chemosensor solution in a buffered medium. As a consequence, the simplicity, practicality, rapidity, and low cost of synthesis of the proposed Schiff base chemosensor are highlighted.

A sustainable UPLC-UV method for quantification of donepezil hydrochloride in biorelevant media applied to dissolution profile comparison.

Donepezil hydrochloride is one of the most prescribed anti-Alzheimer's drugs, despite being available for more than two decades, chromatographic methods for the quantification of the drug in biorelevant media that mimics pH physiological conditions in vivo (pH 1.2, 4.5, and 6.8) are not available in the literature. These media are used in the dissolution test, an important tool, for registration and quality control of medicines. Considering the need for methods with this purpose, this work aimed to develop and validate a sustainable UPLC-UV method for quantification of donepezil hydrochloride in tablets, specifically on assay and dissolution profile, with reduced environmental impacts. The proposed method has a run time of 2 min and requires for each run, only 0.8 mL of solvents, providing excellent green analysis. The method proved to be selective, linear, precise, accurate, robust in the range of 2-14 µg/mL. Three products (reference, similar, and generic) were analyzed and showed very rapid dissolution. The average content varied from 100.2 ± 0.6% to 109.5 ± 2.1%. Using dissolution efficiency (DE), the drug release profiles were compared in different biorelevant media.

Green method for glucose determination using microfluidic device with a non-enzymatic sensor based on nickel oxyhydroxide supported at activated biochar.

This paper reports the use of nickel ions supported at activated biochar carbon paste electrode (NiAB-CPME) coupled in a microfluidic thread-based electroanalytical device (µTED) for non-enzymatic glucose determination. Biochar was initially prepared from castor oil cake at 400 °C and activated by HNO3 refluxing. Activation process promoted an increase of functional groups, surface area and porosity in comparison to precursor biochar. Activated biochar (AB) has shown an excellent performance to spontaneous preconcentration of Ni(II) ions. In alkaline conditions a stable voltammetric profile associated to Ni(OH)2/NiOOH redox pair was verified and a significant catalytic effect was observed in presence of glucose which was used for its monitoring. Microfluidic device was assembled at a plastic platform printed using 3D printer being easy to construction using low cost materials. Non-enzymatic amperometric glucose sensor coupled in µTED showed a good repeatability of 3.84% for successive injections of glucose (n = 10), a constant flow rate of 1.11 µL s-1 and an analytical frequency of 61 injections per hour. A linear dynamic range (LDR) from 5.0 to 100.0 µmol L-1, limit of detection (LOD) of 0.137 µmol L-1 and limit of quantification (LOQ) 0.457 µmol L-1 glucose were obtained. The proposed device was applied to glucose determination in real biological samples of human saliva and blood serum. Finally, the method was considered a green analytical procedure with Eco-Scale score of 81.