Reducing Carbon Footprint of Disposable Pulse Lavage Systems in Total Hip and Knee Arthroplasty.

Pulse lavage is recommended in all modern total joint arthroplasty operations in the UK. The common current pulse lavage is a disposable battery-operated system. AC and power tool powered models are commercially available in the UK. We performed a carbon emissions analysis of each model to evaluate the reduction in the carbon footprint of the arthroplasty operations at one trust and extrapolated the data to scale the possible economic and environmental benefits. Introducing a power tool driven pulse lavage system can reduce the carbon footprint of pulse lavage by 50% compared to the battery and AC-powered options. Additionally, we have reduced the economic impact of one trust by switching to a "greener" alternative pulse lavage system. In trusts where a power tool-driven pulse lavage is not possible, we advocate using AC-powered kits that are less wasteful than the more commonly used battery-powered options.

A Missed Diagnosis of Intraprosthetic Dislocation in a Dual-Mobility Bearing Following Closed Reduction.

Dual-mobility bearings have been found to reduce the rate of dislocation following both primary and revision total hip arthroplasty. Their unique design involves two articulating surfaces which increases construct stability but also leaves them susceptible to a unique complication known as intraprosthetic dislocation (IPD). We report the case of a 33-year-old female who sustained an IPD following closed reduction. Following a missed radiographic diagnosis, the patient experienced pain and mechanical symptoms secondary to her implant failure. Surgical removal of the dislodged liner with component revision was required. This case highlights several crucial steps in the management of patients with dislocated total hip arthroplasties including implant identification and careful review of postreduction radiographs. We also discuss several strategies to properly diagnose, manage, and avoid IPD.

Preoperative Templating for Total Hip Arthroplasty: A Method for Calibrating Digital Radiographs Using Patient Demographics and Anthropometric Measurements.

Background Preoperative templating aids the surgeon in estimating implant size and placement. Calibration markers are used to set the correct magnification of digital images before templating. Improper marker placement or complete absence can lead to inaccuracy or an inability to calibrate images altogether. Aims This study describes a method for calibrating images using a patient's femoral head size (FHS) predicted using demographics and anthropometric data. Materials and methods A formula predicting the FHS was derived from a cohort of 507 patients who underwent hemiarthroplasty for an intracapsular fractured neck of the femur through multivariate regression analysis. A separate validation cohort (n=50) who had undergone total hip arthroplasty (THA) had postoperative radiographs calibrated using the predicted FHS and the native contralateral hip as a surrogate calibration marker. The THA femoral head implant size was subsequently measured and compared with the actual implant size selected intraoperatively. Measurements were performed by two independent assessors to determine intra- and interobserver reliability. Results Multivariate regression analyses showed four variables significantly correlated with the size of the femoral head: gender (p < 0.001), height (p < 0.001), weight (p < 0.001), and race (Asian) (p = 0.01). Using these, a regression model to predict the FHS was obtained with an R2 value of 0.65 and a standard error of 2.18 mm. The validation cohort showed that THA head implant size could be accurately measured with an average root-mean-squared error (RMSE) of 1.41 mm (SD = 0.97 mm; %RMSE = 4.7%). The implant head size was measured to be within 5%, 10%, and 15% RMSE in 57.5%, 93.0%, and 100.0% of cases, respectively. There was excellent intraobserver (R2 = 0.94 and 0.95) and interobserver (R2 = 0.94) reliability. Conclusions The novel method proposed and validated in this study, using a predicted FHS to calibrate digital images, provides an alternative means of templating THA for fractured neck of the femur patients, in whom external calibration markers are often absent.

Complications and Costs Associated With Ethnicity Following Total Hip Arthroplasty: A Retrospective Matched Cohort Study.

BACKGROUND: Minority patients often have greater numbers of complications, revisions, and costs after total hip arthroplasty (THA). This study investigates how race correlates with specific surgical complications, revisions, and total costs following THA both before and after propensity matching. METHODS: Data from 2014-2016 were collected from a large commercial insurance database known as PearlDiver. THA patients were assigned under Current Procedural Terminology (CPT-27130) and International Statistical Classification of Diseases (ICD-9-P-8151) codes and then divided into groups based on racial status in the database. Patients of different ethnicities including White, Black, Asian, and Hispanic patients were compared in regard to age, gender, comorbidities, lengths of stay, and surgical complications and costs at thirty days, ninety days, and one year using unequal variance t-tests. Black, Asian, and Hispanic patients are collectively referred to as minority patients. Patient comparisons were done both before and after matching for age, gender, tobacco use, diabetes, and obesity comorbidities. RESULTS: A total of 73,688 White (93%), 4,822 Black (6%), 268 Asian (0.3%), and 420 Hispanic (0.5%) THA patients were included. Significantly more minority patients underwent THA under the age of 65 and had higher comorbidity indices and lengths of stay. Black patients had significantly higher complication rates, but there was no significant difference in rates of revision in any minority group. Minority patients were charged 9%-83% more. After matching, Black and Hispanic patients maintained higher comorbidity indices and lengths of stay. Black patients had a spectrum of complication rates but significantly decreased revision rates. Furthermore, after matching, minority patients were charged 5%-65% more. CONCLUSIONS: Black patients experienced significantly greater rates of complications and higher total costs; whereas, Asian and Hispanic patients did not have significant differences in complications but did have higher costs. Therefore, this study aligns with previous studies and supports our hypothesis that Black ethnicity patients have worse outcomes than White ethnicity patients after THA, advocating for reducing health disparities and establishing more equitable healthcare, but does not support our hypothesis for Asian and Hispanic patients, likely due to a small study population size, warranting further research into the topic.

The Complication of a Retained Broken Distal Interlocking Screw Within a Cephalomedullary Nail During Conversion Hip Arthroplasty: A Case Report.

In patients who undergo femoral fracture fixation with a cephalomedullary nail, the breakage of one or more of the distal interlocking screws is a well-described phenomenon. The presence of a broken interlocking screw in patients who require the removal of their cephalomedullary nail presents a unique challenge. The broken interlocking screw may be retrieved, or the screw may be retained if it is not engaged within the nail and the nail can safely be removed while leaving the broken screw fragment behind. We report a hip conversion arthroplasty case with a broken interlocking screw where the nail was removed with ease and the broken screw was assumed to have been left behind. Cerclage wires were placed for an apparent proximal femoral fracture. Postoperative X-rays demonstrated a large lucency tracking from the prior location of the distal interlocking screw to the calcar region. This finding made it evident that the broken screw had been retained in the nail and was dragged up the femur upon nail removal, causing a large gouge spanning the entire femur.

Incidence of Symptomatic Venous Thromboembolism (VTE) in 8,885 Elective Total Hip Arthroplasty Patients Receiving Post-operative Aspirin VTE Prophylaxis.

BACKGROUND: Venous thromboembolism (VTE) is a potentially reducible cause of morbidity and mortality in patients undergoing elective hip arthroplasty surgery. The balance of post-operative VTE prophylaxis and risk of post-operative haemorrhage remains at the forefront of surgeon's mind. The National Institute for Health and Care Excellence (NICE) published updated guidelines in 2018 which recommend the use of both mechanical and pharmacological methods in patients undergoing elective total hip arthroplasty (THA). OBJECTIVES: The aim of this study was to present the symptomatic VTE incidence in 8,885 patients who underwent THA between January 1998 and March 2018 with Aspirin as the primary agent for pharmacological thromboprophylaxis. Intermittent calf compression stockings are routinely used from the time of surgery until mobilization (usually the following day) with prophylactic doses of low molecular weight heparin (LMWH) during inpatient stay (from 2005 onwards) and then Aspirin 150mg once daily for six weeks on hospital discharge (or Aspirin only prior to 2005), with use of other therapies occasionally as required. METHODS: Analysis of prospective data collection from consecutive patients at a single institution undergoing THA was performed with the incidence of symptomatic deep vein thrombosis (DVT) and pulmonary embolism (PE) occurring within six months of the index operation as the primary outcome measure. Ninety-day all-cause mortality of this cohort of patients was also analysed. RESULTS: 8,885 patients were reviewed. This included 7230 primary, 224 complex primary and 1431 revision cases. The overall incidence of symptomatic VTE after elective THA was 1.11% (99/8885) - with the incidence of symptomatic DVT of 0.59% (52/8885) and the incidence of symptomatic PE of 0.53% (47/8885). There was no significant difference (χ2 test, p=0.239) in the symptomatic VTE incidence between primary (1.20% - 89/7230), complex primary (0.89% - 2/224) and revision cases (0.70% - 10/1431). The 90-day all-cause mortality was 0.88% (78/8885). Cardiovascular and respiratory disease were the main causes of death following surgery. Only 0.03% of deaths (n= 3) within 90 days of index surgery were due to PE. There was no significant difference (p=0.327) in length of stay (and hence amount of pharmacologic prophylaxis with LMWH received by patients before commencement of Aspirin) with the average length of stay for those patients who did not suffer a VTE of 6.8 days compared with 7.6 days for those who did suffer a VTE. CONCLUSION: Our results support the use of aspirin as an effective form of prophylaxis against symptomatic VTE following THA in contradiction to NICE and American Academy of Orthopaedic Surgery (AAOS) recommendations. It is not associated with an increased incidence in symptomatic DVT, PE or death compared to other published studies. The fact that it is inexpensive, readily available, requires no monitoring and does not pose an increased risk of bleeding are other advantages of using aspirin for VTE prophylaxis.

Simultaneous Bilateral Neck of Femur Fracture After Spiritual Therapy.

Bilateral simultaneous fracture of the neck of the femur is an extremely rare injury; out of the reported cases, 50% are caused by electrical shock. We reported a rare case of simultaneous bilateral femur neck fracture caused by electrical shock as a part of spiritual therapy. The patient underwent bilateral open reduction and internal fixation with cannulated screws. Unfortunately, the fixation failed, and the patient underwent bilateral total hip arthroplasty. The patient was satisfied with the outcome at the final follow-up.

[Effect of robotic-arm assisted total knee arthroplasty on femoral rotation alignment and its short-term effectiveness].

OBJECTIVE: To investigate the improvement of femoral rotation alignment in total knee arthroplasty (TKA) by robotic-arm assisted positioning and osteotomy and its short-term effectiveness. METHODS: Between June 2020 and November 2020, 60 patients (60 knees) with advanced osteoarthritis of the knee, who met the selection criteria, were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. Patients were treated with robotic-arm assisted TKA (RATKA) in trial group, and with conventional TKA in control group. There was no significant difference in gender, age, side and course of osteoarthritis, body mass index, and the preoperative hip-knee-ankle angle (HKA), lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), posterior condylar angle (PCA), knee society score-knee (KSS-K) and KSS-function (KSS-F) scores between the two groups ( P>0.05). The clinical (KSS-K, KSS-F scores) and imaging (HKA, LDFA, MPTA, PCA) evaluation indexes of the knee joints were compared between the two groups at 3 months after operation. RESULTS: All patients were successfully operated. The incisions in the two groups healed by first intention, with no complications related to the operation. Patients in the two groups were followed up 3-6 months, with an average of 3.9 months. KSS-K and KSS-F scores of the two groups at 3 months after operation were significantly higher than those before operation ( P<0.05), but there was no significant difference between the two groups ( P>0.05). X-ray re-examination showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred. HKA, MPTA, and PCA significantly improved in both groups at 3 months after operation ( P<0.05) except LDFA. There was no significant difference in HKA, LDFA, and MPTA between the two groups ( P>0.05). PCA in trial group was significantly smaller than that in control group ( t=2.635， P=0.010). CONCLUSION: RATKA can not only correct knee deformity, relieve pain, improve the quality of life, but also achieve the goal of restoring accurate femoral rotation alignment. There was no adverse event after short-term follow-up and the effectiveness was satisfactory.

A combination of infraclavicular and suprascapular nerve blocks for total shoulder arthroplasty: A case series.

BACKGROUND: Shoulder arthroplasty is associated with significant post-operative pain. Interscalene plexus block is the gold standard for pain management in patients undergoing this surgery, however, alternatives are currently being developed. We hypothesized that a combination of anterior suprascapular nerve block and lateral sagittal infraclavicular block would provide effective post-operative analgesia. Primary aims for this study were to document numeric rating scale (NRS) pain score and use of oral morphine equivalents (OMEq) during the first 24 hours after surgery. Secondary aim was to determine the incidence of hemidiaphragmatic paralysis. METHODS: Twenty patients (ASA physical status I-III) scheduled for shoulder arthroplasty were studied. Four mL ropivacaine 0.5% was administered for the suprascapular nerve block and 15 mL ropivacaine 0.75% for the infraclavicular block. Surgery was performed under general anaesthesia. Paracetamol and prolonged-release oxycodone were prescribed as post-operative analgesics. Morphine and oxycodone were prescribed as rescue pain medication. Diaphragm status was assessed by ultrasound. RESULTS: Median NRS (0-10) at 1, 3, 6, 8 and 24 hours post-operatively were 1, 0, 0, 0 and 3, respectively. NRS at rest during the first 24 post-operative hours was 4 (2.5-4.5 [0-5]), median (IQR [range]). Maximum NRS was 6.5 (5-8 [0-10]) median (IQR [range]). Total OMEq during the first 24 post-operative hours was 52.5 mg (30-60 [26.4-121.5]) median (IQR [range]). Hemidiaphragmatic paralysis was diagnosed in one patient (5%). CONCLUSIONS: The combination of suprascapular and infraclavicular nerve block shows an encouraging post-operative analgesic profile and a low risk for hemidiaphragmatic paralysis after total shoulder arthroplasty.

Total Knee Arthroplasty in Ambulatory Surgery Centers: The New Reality!

By streamlining surgical care and eliminating postoperative hospitalization, the transition to ambulatory total knee arthroplasty (TKA) has the potential to improve efficiency and minimize the costs of care. However, practical, legal, and financial implications remain to be addressed. The Centers for Medicare and Medicaid Services has also yet to address concerns generated by the removal of TKA from the Inpatient-Only List and provide guidance on patient selection. Rolling out regulatory changes that impact high-volume procedures, such as TKA, in a short period of time and without appropriate feedback can only lead to further confusion. As surgeons, we are in a unique business model that requires us to constantly innovate to deliver high quality care, while also taking financial cuts as a result of our innovations.

[Effect of three-dimensional printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty].

OBJECTIVE: To investigate the effect of three-dimensional (3D) printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty (TKA). METHODS: Between January 2018 and October 2018, 60 patients (60 knees) with advanced knee osteoarthritis who received TKA and met the selection criteria were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. The TKA was done with the help of 3D printing guide plate in the guide group and following traditional procedure in the control group. There was no significant difference in gender, age, disease duration, side, and preoperative hip-knee-ankle angle (HKA), posterior condylar angle (PCA), patella transverse axis-femoral transepicondylar axis angle (PFA), Hospital for Special Surgery (HSS) score, and American Knee Society (AKS) score ( P>0.05). RESULTS: All incisions healed by first intention and no complications related to the operation occurred. All patients were followed up 10-12 months, with an average of 11 months. HSS score and AKS score of the two groups at 6 months after operation were significantly higher than those before operation ( P<0.05), but there was no significant difference between the two groups ( P>0.05). Postoperative X-ray films showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred during follow-up. HKA, PCA, and PFA significantly improved in the two groups at 10 months after operation compared with those before operation ( P<0.05). There was no significant difference in HKA at 10 months between the two groups ( t=1.031, P=0.307). PCA and PFA in the guide group were smaller than those in the control group ( P<0.05). CONCLUSION: Application of 3D printing guide plate in TKA can not only correct the deformity of the knee joint and alleviate the pain symptoms, but also achieve the goal of the accurate femoral rotation alignment and good patellar tracking.

Effect of three-dimensional printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty / 中国修复重建外科杂志

Objective: To investigate the effect of three-dimensional (3D) printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty (TKA). Methods: Between January 2018 and October 2018, 60 patients (60 knees) with advanced knee osteoarthritis who received TKA and met the selection criteria were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. The TKA was done with the help of 3D printing guide plate in the guide group and following traditional procedure in the control group. There was no significant difference in gender, age, disease duration, side, and preoperative hip-knee-ankle angle (HKA), posterior condylar angle (PCA), patella transverse axis-femoral transepicondylar axis angle (PFA), Hospital for Special Surgery (HSS) score, and American Knee Society (AKS) score ( P>0.05). Results: All incisions healed by first intention and no complications related to the operation occurred. All patients were followed up 10-12 months, with an average of 11 months. HSS score and AKS score of the two groups at 6 months after operation were significantly higher than those before operation ( P0.05). Postoperative X-ray films showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred during follow-up. HKA, PCA, and PFA significantly improved in the two groups at 10 months after operation compared with those before operation ( P<0.05). There was no significant difference in HKA at 10 months between the two groups ( t=1.031, P=0.307). PCA and PFA in the guide group were smaller than those in the control group ( P<0.05). Conclusion: Application of 3D printing guide plate in TKA can not only correct the deformity of the knee joint and alleviate the pain symptoms, but also achieve the goal of the accurate femoral rotation alignment and good patellar tracking.

[Gait analysis after total knee arthroplasty assisted by three-dimensional printing navigation template].

OBJECTIVE: To explore the gait trajectory characteristics of patients after total knee arthroplasty (TKA) assisted by three-dimensional (3D) printing navigation template. METHODS: Twenty female patients (20 knees) with knee osteoarthritis who were treated with TKA assisted by 3D printing navigation template between February 2017 and February 2018 were selected as the 3D printing group. The patients were 50-69 years old, with an average age of 57.2 years. The disease duration was 4-7 years, with an average of 5.6 years. The osteoarthritis was classified as Kellgren-Lawrence Ⅲ level in 5 cases and Ⅳ level in 15 cases. The preoperative hip-knee-ankle angle (HKA) was (170.8±5.6)°. All patients were varus deformity. According to age and affected side, 20 healthy female volunteers were selected as the control group. The volunteers were 51-70 years old, with an average age of 56.7 years. Preoperative HKA was (178.8±0.6)°. There was significant difference in HKA between the two groups ( P>0.05). The HKA, Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and visual analogue scale (VAS) scores of the 3D printing group before and after operation were compared. At 6 months after operation, the gait trajectory characteristics of 3D printing group and control group were analyzed by Vicon gait capture system. The kinematics parameters included velocity, cadence, stride length, maximum knee flexion angle (stance), minimum knee flexion angle (stance), maximum knee flexion angle (swing), mean hip rotation angle (stance), mean ankle rotation angle (stance). RESULTS: The incisions of 3D printing group healed by first intention, with no complications. All patients were followed up 7-12 months (mean, 9.0 months). The WOMAC and VAS scores at 6 months after operation were significant lower than those before operation ( P<0.05). The HKA was (178.8±0.8)° at 4 weeks after operation and the difference was significant when compared with that before operation ( t=39.203, P=0.000). The position of the prosthesis was good. The femoral posterior condyle osteotomy line, surgical transepicondylar axis, and patella transverse line were parallel, varus deformity was corrected, and lower limb alignment was restored to neutral position. Gait analysis at 6 months after operation showed that the differences in all kinematics parameters between the two groups were significant ( P<0.05). CONCLUSION: Assisted by 3D printing navigation template, TKA can alleviate pain symptoms and correct deformity, with satisfactory early effectiveness. Compared with healthy people, the early postoperative gait of the patients were characterized by decreasing velocity, cadence, stride length, knee flexion range, and increasing compensatory hip and ankle rotation range.

Delirium after hip hemiarthroplasty for proximal femoral fractures in elderly patients: risk factors and clinical outcomes.

BACKGROUND: The primary aim of the present study was to verify the potential risk factors for developing a delirium after hip fracture surgery. The secondary aim of this study was to examine the related clinical outcomes after a delirium developed post-hip fracture surgery. PATIENTS AND METHODS: Data were extracted from a prospective hip fracture database and completed by retrospective review of the hospital records. A total of 463 patients undergoing hip fracture (hip hemiarthroplasty) surgery in a level II trauma teaching hospital between January 2011 and May 2016 were included. Delirium was measured using the Delirium Observation Screening Scale, the confusion assessment method, and an observatory judgment by geriatric medicine specialists. RESULTS: The results showed that 26% of the patients (n=121) developed a delirium during hospital stay with a median duration during admission of 5 days (IQR 3-7). The multivariable model showed that the development of delirium was significantly explained by dementia (OR 2.75, P=0.001), age (OR 1.06, P=0.005), and an infection during admission (pneumonia, deep surgical site infection, or urinary tract infection) (OR 1.23, P=0.046). After 1 year of follow-up, patients who developed delirium after hip fracture surgery were significantly more discharged to (semi-independent) nursing homes (P<0.001) and had a significantly higher mortality rate (P<0.001) compared to patients without delirium after hip fracture surgery. CONCLUSIONS: The results showed that 26% of the patients undergoing hip fracture surgery developed a delirium. The risk factors including age, dementia, and infection during admission significantly predicted the development of the delirium. No association was confirmed between delirium and time of admission or time to surgery. The development of delirium after hip fracture surgery was subsequently found to be a significant predictor of admission to a nursing home and mortality after 1 year.

Gait analysis after total knee arthroplasty assisted by three-dimensional printing navigation template / 中国修复重建外科杂志

Objective: To explore the gait trajectory characteristics of patients after total knee arthroplasty (TKA) assisted by three-dimensional (3D) printing navigation template. Methods: Twenty female patients (20 knees) with knee osteoarthritis who were treated with TKA assisted by 3D printing navigation template between February 2017 and February 2018 were selected as the 3D printing group. The patients were 50-69 years old, with an average age of 57.2 years. The disease duration was 4-7 years, with an average of 5.6 years. The osteoarthritis was classified as Kellgren-Lawrence Ⅲ level in 5 cases and Ⅳ level in 15 cases. The preoperative hip-knee-ankle angle (HKA) was (170.8±5.6)°. All patients were varus deformity. According to age and affected side, 20 healthy female volunteers were selected as the control group. The volunteers were 51-70 years old, with an average age of 56.7 years. Preoperative HKA was (178.8±0.6)°. There was significant difference in HKA between the two groups ( P>0.05). The HKA, Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and visual analogue scale (VAS) scores of the 3D printing group before and after operation were compared. At 6 months after operation, the gait trajectory characteristics of 3D printing group and control group were analyzed by Vicon gait capture system. The kinematics parameters included velocity, cadence, stride length, maximum knee flexion angle (stance), minimum knee flexion angle (stance), maximum knee flexion angle (swing), mean hip rotation angle (stance), mean ankle rotation angle (stance). Results: The incisions of 3D printing group healed by first intention, with no complications. All patients were followed up 7-12 months (mean, 9.0 months). The WOMAC and VAS scores at 6 months after operation were significant lower than those before operation ( P<0.05). The HKA was (178.8±0.8)° at 4 weeks after operation and the difference was significant when compared with that before operation ( t=39.203, P=0.000). The position of the prosthesis was good. The femoral posterior condyle osteotomy line, surgical transepicondylar axis, and patella transverse line were parallel, varus deformity was corrected, and lower limb alignment was restored to neutral position. Gait analysis at 6 months after operation showed that the differences in all kinematics parameters between the two groups were significant ( P<0.05). Conclusion: Assisted by 3D printing navigation template, TKA can alleviate pain symptoms and correct deformity, with satisfactory early effectiveness. Compared with healthy people, the early postoperative gait of the patients were characterized by decreasing velocity, cadence, stride length, knee flexion range, and increasing compensatory hip and ankle rotation range.

Large tibial geode, which developed several years after a left medial Oxford unicondylar knee arthroplasty, treated with curettage and bone grafting.

BACKGROUND: Tibial geodes are rare, and usually reported in association with rheumatoid arthritis. This case study reported the rare occurrence of a tibial geode in association with a left unicondylar knee arthroplasty (UKA). The patient, a 55-year-old male, was initially pleased with his UKA, which was performed at another institution. However, just over one year after the operation he began experiencing pain and discomfort. He did not present to the current institution until he was six years after UKA. This pain was movement and weight bearing related, although he still managed to maintain an active lifestyle working as a builder. After several years of follow-up, a computed tomography (CT) scan showed a significant increase in size of the geode. METHODS: The patient initially did not want to undergo further surgery, as he was self-employed, but it was decided, in conjunction with the patient, that it was time to operate because the stability of the prothesis was in question. Transcortical and retrograde curettage of the geode was performed and one and a half femoral head allografts were used to fill the geode. RESULTS: Follow-up since the operation showed good infilling of the geode and bone remodelling, with resolution of symptoms at 12 months. CONCLUSIONS: This case report was the first to report a symptomatic tibial geode in close association with UKA, which did not lead to revision surgery to total knee arthroplasty (TKA), but instead was successfully treated with currettage and bone grafting.

Application of next generation sequencing technology in the detection of pathogenic bacteria in synovial fluid of prosthetic joint infection / 中华骨科杂志

Objective To investigate the role of next generation sequencing technology in the detection of pathogenic bacteria in synovial fluid of prosthetic joint infection.Methods Nine samples of synovial fluid specimens of prosthetic joint infection patients with positive microbial culture from October,1 2016 to April 1,2017 were collected.Each specimen (200 μl) was used for next generation sequencing.Total DNA was extracted from synovial fluid samples.The collected DNA samples were amplified by PCR in the V4 region of 16S rDNA gene.The amplified products were sequenced using the Illumina Miseq platform,2× 250 bp double-end sequencing strategy.The sequencing results were compared with the SILVA database to analyze the types of bacteria and relative abundance in the DNA samples.A total of 200 μl sterile double-distilled deionized water was used as control.Results Nine cases of microbial culture positive prosthetic joint infection synovial fluid DNA samples were sequenced by 16S rDNA amplicon sequencing and yielded 3 132 415 high-quality reads and 3 752 operational taxonomic units (OTU).At the level of bacteria,a total of 9 different bacterial gates were detected on 9 DNA samples.At the level of bacteria,34 different bacteria were detected by 16S rDNA amplicon sequencing.Each DNA sample was detected by 16S rDNA amplicon sequencing and the bacterial genus was identical to that of laboratory culture.16S rDNA amplicon sequencing detected more species of bacteria [6(3,9.5)] than bacterial cultures [(1.0(1.0,1.0)].There was statistically significant difference in the number of bacteria detected in the same specimen between the 16S rDNA amplicon sequencing and the laboratory culture (Z=2.533,P=0.011).Among them,the dominant bacterial population (highest abundance) detected by 16S rDNA amplicon sequencing in four DNA samples was consistent with the results of laboratory culture.Conclusion In the prosthetic joint infection,the 16S rDNA amplicon sequencing technology can accurately detect pathogens that are consistent with the laboratory culture,and can detect other bacteria outside the laboratory culture.This technology can provide the basis for clinical diagnosis and antibiotic selection.

Clinical outcomes of total hip arthroplasty for treatment of end-stage hip joint with pigmented villonodular synovitis / 局解手术学杂志

Objective To study the clinical efficacy of total hip arthroplasty for treatment of end-stage hip with pigmented villonodular synovitis(PVNS).Methods From January 2000 to March 2015,a total of 34 patients with hip PVNS were treated by total hip arthroplasty (THA) combined with synovectomy.Pelvic X-ray,CT and MRI examinations were performed before the surgery,and Harris hip joint function score was performed before and after surgery.Systematic rehabilitation training was performed after the operation,and the hip joint X-ray films were regularly reviewed.Results All the 34 patients were reviewed and observed for an average of 5.2 years (ranged from 1.5 to 7 years).The position of the prosthesis was good and the motion of the joint was satisfactory.The mean preoperative Harris hip scores improved from (45.0 ± 6.4) perioperatively to (90.2 ± 3.2) postoperatively,with statistically significant difference (t =0.468,P ＜ 0.05).None of the patients had clinical or radiographic evidence of recurrent PVNS.Conclusion Total hip arthroplasty combined with synovectomy is an effective therapeutic choice for end-stage hip with pigmented villonodular synovitis,which can improve the clinical results and prevent the disease recurrence.

Plate fixation of periprosthetic femur fractures: What happens to the cement mantle?

Osteosynthesis of periprosthetic femur fractures by screw fixation around the implanted prosthetic stem is currently regarded as the biomechanically superior option compared with cerclage. The aim of this biomechanical study was damage analysis of the cement mantle after revision screw insertion. A prosthetic stem (Bicontact) was implanted in 20 cadaveric femora in cemented technique. A locking compression plate (Synthes) was then applied to the lateral femur at the level of the prosthetic stem. The method of plate fixation to the femur was assigned randomly to three groups: bicortical non-locking screws, monocortical locking screws, and bicortical locking screws. This was followed by applying a fluctuating axial load (2100 N, 0.5 Hz) for 20,000 cycles. After testing, macroscopic and microscopic evaluations of the cement mantle were conducted. Cracks formed in the cement mantle in 14% of the 80 screw holes. The type of screw (bicortical or monocortical; locking or non-locking) had no significant effect on the number of cracks (p = 0.52). The relationship between manifestation of crack damage and cement mantle thickness was not significant (p = 0.36), whereas the relationship between crack formation and screw position was significant (p = 0.019). Those screws whose circumference was only partially within the cement mantle yielded a significantly lower number of cracks compared with screws positioned completely within the cement mantle or even touching the prosthetic stem. In order to reduce the incidence of crack formation in the cement mantle during plate osteosynthesis of periprosthetic femur fractures, the screws should not be either placed within the cement mantle or make direct contact with the stem.

A Randomized Controlled Trial of Two Distinct Shared Decision-Making Aids for Hip and Knee Osteoarthritis in an Ethnically Diverse Patient Population.

OBJECTIVES: To evaluate the use of decision aids for hip and knee osteoarthritis (OA) regarding the potential risks and benefits of different treatment options. METHODS: A prospective, randomized controlled trial was conducted of 147 patients with advanced hip or knee OA to compare the effect of two decision aids (booklet-only vs. booklet with DVD). RESULTS: Both decision aid programs were well received and demonstrated improvements in patient knowledge and willingness to participate in treatment decisions. The decision aids, however, had a marginal effect on patient willingness to participate in OA management, with an increase of 0.11 and 0.6 on a scale of 2 (P = 0.58) between groups. CONCLUSIONS: The decision aids were accepted for most patients and effective in improving patient knowledge and willingness to participate in the decision process. Nevertheless, the addition of a more expensive DVD to the booklet program did not improve patient acceptance or knowledge.