ABSTRACT
In vitro testing for evaluating degradation mode and rate of candidate biodegradable metals to be used as intravascular stents is crucial before going to in vivo animal models. In this study, we show that X-ray microfocus computed tomography (microCT) presents a key added value to visualize degradation mode and to evaluate degradation rate and material surface properties in 3D and at high resolution of large regions of interest. The in vitro degradation behavior of three candidate biodegradable stent materials was evaluated: pure iron (Fe), pure zinc (Zn), and a quinary Zn alloy (ZnAgCuMnZr). These metals were compared to a reference biostable cobaltchromium (CoCr) alloy. To compare the degradation mode and degradation rate evaluated with microCT, scanning electron microscopy (SEM) and inductively-coupled plasma (ICP) were included. We confirmed that Fe degrades very slowly but with desirable uniform surface corrosion. Zn degrades faster but exhibits localized deep pitting corrosion. The Zn alloy degrades at a similar rate as the pure Zn, but more homogeneously. However, the formation of deep internal dendrites was observed. Our study provides a detailed microCT-based comparison of essential surface and corrosion properties, with a structural characterization of the corrosion behavior, of different candidate stent materials in 3D in a non-destructive way.
Subject(s)
Absorbable Implants , Materials Testing , Stents , X-Ray Microtomography , Zinc , Zinc/chemistry , Alloys/chemistry , Iron/chemistry , CorrosionABSTRACT
INTRODUCTION: The aims of this study were to update our experience with biodegradable polydioxanone (PDO) airway stents in children, focusing on effectiveness and safety, and to analyze the factors involved in the different outcomes observed. MATERIALS AND METHODS: Retrospective study of patients managed with PDO stents from 2012 to 2023. Variables collected: demographics, comorbidities, indication, clinical baseline, stent size, location, complications, clinical outcome, and time of follow-up. Statistical analyses were performed to detect the eventual contribution of variables in the different outcomes observed. RESULTS: Fifty-four PDO stents were placed in 26 patients (median age, 4 months). All showed severe symptoms of central airway obstruction due to tracheomalacia in nine patients, bronchomalacia five, tracheobronchomalacia 10, and tracheal stenosis two. Stent placement was uneventful in every case: 29 stents in the trachea and 25 in the main bronchi. 53.8% of patients needed successive stenting, and all exhibited comorbidities. Complete clinical resolution was observed in eight cases (30.7%), partial improvement in 13 (50%), unchanged in 4 (15.3%), and worsened in one. Age had a significant positive impact on outcome (6 vs. 3 months; p = 0.024). Additionally, smaller stents were associated with a better outcome (20 vs. 26 mm; p = 0.044). Granulation tissue was the most frequent complication (34.6%). Five patients (19.2%) died due to severe comorbidities, follow-up was complete in survivors (median, 58 months). CONCLUSIONS: PDO stents are safe and effective when dealing with severe tracheobronchial obstruction. Stent-related granulation tissue continues to be a relevant matter of concern. This issue, together with increased degradation times, deserves further research.
ABSTRACT
BACKGROUND: Biliary complications are common in pediatric liver transplant. Strictures resistant to interventional radiology procedures can be extremely challenging to manage and may result in the need of surgery or retransplantation. METHODS: This case report illustrates the use of biodegradable stents post left lateral segment live donor liver transplant in a pediatric patient with a recalcitrant chronic stricture of the biliary-enteric anastomosis. The patient developed a high stricture requiring multiple interventions and eventual access of both the segment II and segment III ducts of the graft. RESULTS: To ensure adequate biliary drainage, two biodegradable stents were deployed using a "kissing-stent" technique. The stents were successfully deployed and allowed the patient to remain free from an internal-external biliary drain for 11 months, with eventual redeployment of an additional biodegradable stent. CONCLUSION: In patients with recalcitrant stenosis of the biliary anastomosis, biodegradable stents may provide durable drainage, optimizing graft function and delaying retransplantation in addition to keeping patients without external devices, thus improving quality of life.
Subject(s)
Liver Transplantation , Humans , Child , Constriction, Pathologic/surgery , Living Donors , Quality of Life , StentsABSTRACT
Objectives: To examine the 16-year developmental history, research hotspots, and emerging trends of zinc-based biodegradable metallic materials from the perspective of structural and temporal dynamics. Methods: The literature on zinc-based biodegradable metallic materials in WoSCC was searched. Historical characteristics, the evolution of active topics and development trends in the field of zinc-based biodegradable metallic materials were analyzed using the bibliometric tools CiteSpace and HistCite. Results: Over the past 16 years, the field of zinc-based biodegradable metal materials has remained in a hotspot stage, with extensive scientific collaboration. In addition, there are 45 subject categories and 51 keywords in different research periods, and 80 papers experience citation bursts. Keyword clustering anchored 3 emerging research subfields, namely, #1 plastic deformation #4 additive manufacturing #5 surface modification. The keyword alluvial map shows that the longest-lasting research concepts in the field are mechanical property, microstructure, corrosion behavior, etc., and emerging keywords are additive manufacturing, surface modification, dynamic recrystallization, etc. The most recent research on reference clustering has six subfields. Namely, #0 microstructure, #2 sem, #3 additive manufacturing, #4 laser powder bed fusion, #5 implant, and #7 Zn-1Mg. Conclusion: The results of the bibliometric study provide the current status and trends of research on zinc-based biodegradable metallic materials, which can help researchers identify hot spots and explore new research directions in the field.
ABSTRACT
Transcatheter pulmonary valve replacement is a minimally-invasive alternative treatment for right ventricular outflow tract dysfunction and has been rapidly evolving over the past years. Heart valve prostheses currently available still have major limitations. Therefore, one of the significant challenges for the future is the roll out of transcatheter tissue engineered pulmonary valve replacement to more patients. In the present study, biodegradable poly-ε-caprolactone (PCL) nanofiber scaffolds in the form of a 3D leaflet matrix were successfully seeded with human endothelial colony-forming cells (ECFCs), human induced pluripotent stem cell-derived MSCs (hMSCs), and porcine MSCs (pMSCs) for three weeks for the generation of 3D tissue-engineered tri-leaflet valved stent grafts. The cell adhesion, proliferation, and distribution of these 3D heart leaflets was analyzed using fluorescence microscopy and scanning electron microscopy (SEM). All cell lineages were able to increase the overgrown leaflet area within the three-week timeframe. While hMSCs showed a consistent growth rate over the course of three weeks, ECFSs showed almost no increase between days 7 and 14 until a growth spurt appeared between days 14 and 21. More than 90% of heart valve leaflets were covered with cells after the full three-week culturing cycle in nearly all leaflet areas, regardless of which cell type was used. This study shows that seeded biodegradable PCL nanofiber scaffolds incorporated in nitinol or biodegradable stents will offer a new therapeutic option in the future.
Subject(s)
Induced Pluripotent Stem Cells , Polyesters , Humans , Animals , Swine , Polyesters/pharmacology , Tissue Engineering , Tissue Scaffolds , StentsABSTRACT
Challenges associated with drug-releasing stents used in percutaneous transluminal coronary angioplasty (PTCA) encompass allergic reactions, prolonged endothelial dysfunction, and delayed stent clotting. Although absorbable stents made from magnesium alloys seem promising, fast in vivo degradation and poor biocompatibility remain major challenges. In this study, zirconia (ZrO2) layers were used as the foundational coat, while calcium phosphate (CaP) served as the surface layer on unalloyed magnesium specimens. Consequently, the corrosion current density was decreased to 3.86, from 13.3 µA/cm2. Moreover, a heparin-controlled release mechanism was created by co-depositing CaP, gelatin (Gel), and heparin (Hep) on the specimens coated with CaP/ZrO2, thereby boosting magnesium's blood compatibility and prolonging the heparin-releasing time. Techniques like X-ray diffractometry (XRD), focused ion beam (FIB) system, toluidine blue testing, UV-visible spectrometry, field emission scanning electron microscopy (FESEM), and surrogate tests for endothelial cell viability were employed to examine the heparin-infused coatings. The drug content rose to 484.19 ± 19.26 µg/cm2 in multi-layered coatings (CaP-Gel-Hep/CaP-Hep/CaP/ZrO2) from 243.56 ± 55.18 µg/cm2 in a single layer (CaP-Hep), with the controlled release spanning beyond 28 days. Also, cellular viability assessments indicated enhanced biocompatibility of the coated samples relative to those without coatings. This suggests the potential of magnesium samples after coating ZrO2 and CaP with Gel as candidates for porous biodegradable stents or even scaffolds in biomedical applications.
ABSTRACT
Common biliary tract is ≈4 mm in diameter to deliver bile from liver to small intestine to help digestion. The abnormal narrowing leads to severe symptoms such as pain and nausea. Stents are an effective treatment. Compared with non-degradable stents which require repeated removal, biodegradable stents have the advantage of reducing secondary injury related to endoscopic operation and patient burden. However, current biodegradable materials may cause tissue hyperplasia and the treatment method does not target etiology of stricture. So recurrence rates after biodegradable stent implantation are still high. Here, a biodegradable helical stent fabricated from biosynthetic P(3HB-co-4HB) is reported. Tunable properties can be acquired through altering culture substrates. Stent shows shape memory in various solvents. The stent has an optimized design with helical structure and outer track. The self-expanding of helical structure and double drainage realized by outer track greatly improve drainage of bile. Importantly, stent-loading triamcinolone acetonide can inhibit proliferation of fibroblasts and reduce incidence of restricture. Therapeutic effect is also demonstrated in minipigs with biliary stricture. The results of minipig experiments show that biliary duct in treatment group is unobstructed and tissue hyperplasia is effectively inhibited.
Subject(s)
Cholestasis , Plastics , Animals , Humans , Swine , Constriction, Pathologic/surgery , Hyperplasia , Swine, Miniature , Cholestasis/therapy , StentsABSTRACT
BACKGROUND: This systematic review aimed to analyse the use of the SX-ELLA biodegradable stent (BDS) for benign oesophageal strictures through the assessment of clinical and technical success, differences in pre- and post-BDS insertion dysphagia scores, rates of stent migration, and safety. METHODS: A systematic review was reported according to PRISMA guidelines, with a prospectively registered protocol. The databases PubMed, Embase, SCOPUS, and ClinicalTrials.gov were searched up to March 2022. Studies assessing the use of the SX-ELLA BDS in adults with benign oesophageal strictures were included. A pooled data analysis was conducted to analyse the clinical and technical success associated with BDS use, rate of stent migration, and safety. RESULTS: Of the 1509 articles identified, 16 studies treating 246 patients were eligible for inclusion. BDS was clinically successful in 41.9% of cases (95% CI = 35.7 - 48.1%), defined as those who experienced complete symptom resolution following BDS insertion. Technical success was achieved in 97.2% of patients (95% CI = 95.1 - 99.3%). A pooled analysis concluded a decrease in mean dysphagia score of 1.8 points (95% CI = 1.68 - 1.91) following BDS insertion. Re-intervention was required in 89 patients (36.2%, 95% CI = 30.2 - 42.2%), whilst stent migration occurred in 6.5% of patients (95% CI = 3.4 - 9.6%). A total of 37 major clinical complications related to BDS insertion were reported (15.0%, 95% CI = 10.5 - 19.5%). CONCLUSION: The pooled data analysis demonstrates the high technical and moderate clinical success of the SX-ELLA biodegradable stent, supporting its use for benign oesophageal strictures in adults. However, greater evidence is required for more robust conclusions to be made in terms of success when compared to alternative methods of intervention, such as endoscopic dilation.
Subject(s)
Deglutition Disorders , Esophageal Stenosis , Adult , Humans , Constriction, Pathologic , Data Analysis , Deglutition Disorders/etiology , Deglutition Disorders/surgery , Esophageal Stenosis/etiology , Esophageal Stenosis/surgery , Stents/adverse effectsABSTRACT
BACKGROUND: To evaluate whether insertion of self-biodegradable stent into the pylorus to prevent delayed-gastric emptying after pylorus-preserving gastrectomy is feasible and safe through porcine experiment. METHODS: Self-biodegradable dumbbell-shaped pyloric stents were designed from absorbable suture materials: poly(glycolide-co-caprolactone) (PGCL) or poly-p-dioxanone (PPDO). After gastrotomy on ten pigs, each stent was inserted: two shams, four PGCL stents, and four PPDO stents. Body weight (Bwt), body temperature (BT), complete blood cell (CBC) count, and plain X-ray were evaluated. On postoperative day (POD) 13, euthanasia was performed for histologic evaluation. RESULTS: Operation was successfully performed in all ten pigs. Without tagging suture, both stents migrated before POD 3. The migration was delayed up to POD 13, when the tagging sutures (-t) were applied between stent and stomach wall. Self-degradation of PGCL started from POD 3, and stents were completely excreted from the abdomen by POD 8. Although PPDO were also weakened as self-degradation progressed, its shape was maintained in gastrointestinal tract for 13 days. Unexpected sudden death occurred in the pig with PPDO-t2 on POD 10, which is more likely due to acute volvulus rather than stent-related complication. There was no significant difference between three groups in terms of Bwt, BT, CBC, and histology (sham vs. PGCL vs. PPDO, all p > 0.05). CONCLUSION: The concept of biodegradable stents made of absorbent suture material seems feasible in porcine experiment. Among them, PGCL which has shown rapid absorption, appears to be a more suitable material for transient pyloric absorbable stent when considering safety aspect.
Subject(s)
Pylorus , Stomach Neoplasms , Humans , Animals , Swine , Pylorus/surgery , Pylorus/pathology , Stomach Neoplasms/surgery , Stomach Neoplasms/pathology , Feasibility Studies , Gastrectomy/methods , Stents , Abdomen/pathologyABSTRACT
A new series of zinc alloys is in development for bioresorbable stent implantation to alleviate the current materials' long-term complications. Characterization and optimization of the microstructure and corresponding mechanical properties during manufacturing stages will help researchers meet the required values. In this study, the effect of hot extrusion on the Zn-Ag-Mn-Cu-Zr-Ti alloy is characterized. Additionally, thermal treatments at 390 °C for 15, 25, 40, 60, and 120 min were performed to evaluate the effect of intermetallic phase fractions on the corrosion resistance and mechanical strength. Quantitative analysis of X-ray diffraction data demonstrates that the fractions of the MnZn13, ZrZn22, and Zn0.75Ag0.15Mn0.10 intermetallic phases decrease as the thermal treatment time increases. Corrosion tests reveal a reduction in the corrosion rate of the extruded alloy after thermal treatment. The results of uniaxial compression tests and tensile tests show lower strength and higher ductility in all heat-treated conditions compared with the as-extruded condition.
ABSTRACT
Urothelial tumour of the upper urinary tract is a rare neoplasm, but unfortunately, it has a high recurrence rate. The reduction of these tumour recurrences could be achieved by the intracavitary instillation of adjuvant chemotherapy after nephron-sparing treatment in selected patients, but current instillation methods are ineffective. Therefore, the aim of this in vitro study is to evaluate the cytotoxic capacity of a new instillation technology through a biodegradable ureteral stent/scaffold coated with a silk fibroin matrix for the controlled release of mitomycin C as an anti-cancer drug. Through a comparative study, we assessed, in urothelial carcinoma cells in a human cancer T24 cell culture for 3 and 6 h, the cytotoxic capacity of mitomycin C by viability assay using the CCK-8 test (Cell counting Kit-8). Cell viability studies in the urothelial carcinoma cell line confirm that mitomycin C embedded in the polymeric matrix does not alter its cytotoxic properties and causes a significant decrease in cell viability at 6 h versus in the control groups. These findings have a clear biomedical application and could be of great use to decrease the recurrence rate in patients with upper tract urothelial carcinomas by increasing the dwell time of anti-cancer drugs.
ABSTRACT
Strictures are among the most frequent complications in patients with Crohn's disease (CD), usually requiring a combined medical, surgical, and/or endoscopic approach to treatment. Currently, endoscopic balloon dilation (EBD) is the endoscopic treatment of choice, but its effectiveness is not universal, especially in the long term, and it is not free of complications. The technological evolution of stents in recent years has allowed their use in benign diseases of any origin and location, including inflammatory bowel disease (IBD). The current scientific evidence regarding the use of stents in strictures in IBD is limited and it should not be considered the first option in endoscopic treatment. Self-expandable metal stents (SEMS), but no biodegradable stents (BS), can work in cases that are refractory to anterior endoscopic treatment with EBD, in cases in which EBD is not possible, and in cases with strictures of greater length.
Subject(s)
Crohn Disease , Endoscopy, Gastrointestinal , Constriction, Pathologic/etiology , Constriction, Pathologic/surgery , Crohn Disease/complications , Crohn Disease/surgery , Dilatation/adverse effects , Endoscopy, Gastrointestinal/adverse effects , Humans , Stents/adverse effects , Treatment OutcomeABSTRACT
A major limitation of the treatment of low-grade upper tract urothelial carcinoma is the difficulty of intracavitary instillation of adjuvant therapy. Therefore, the aim of this in vitro study was to develop and to assess a new design of biodegradable ureteral stent coated with a silk fibroin matrix for the controlled release of mitomycin C as a chemotherapeutic drug. For this purpose, we assessed the coating of a biodegradable ureteral stent, BraidStent®, with silk fibroin and subsequently loaded the polymeric matrix with two formulations of mitomycin to evaluate its degradation rate, the concentration of mitomycin released, and changes in the pH and the weight of the stent. Our results confirm that the silk fibroin matrix is able to coat the biodegradable stent and release mitomycin for between 6 and 12 h in the urinary environment. There was a significant delay in the degradation rate of silk fibroin and mitomycin-coated stents compared to bare biodegradable stents, from 6-7 weeks to 13-14 weeks. The present study has shown the feasibility of using mitomycin C-loaded silk fibroin for the coating of biodegradable urinary stents. The addition of mitomycin C to the coating of silk fibroin biodegradable stents could be an attractive approach for intracavitary instillation in the upper urinary tract.
ABSTRACT
Background: Pulmonary artery stenosis is often associated with congenital heart disease. The aim of the study was to evaluate the efficacy and safety of stenting for branch pulmonary artery stenosis using a biodegradable nitride iron stent (IBS® Angel™) and right ventricular systolic and diastolic function. Methods: From July 2021 to February 2022, a total of 11 cases (ages ranged from 36 to 86 months old) were included in this pre and post-intervention, prospective, cohort and preclinical study. All cases underwent transthoracic echocardiographic (TTE), chest radiography, along with computed tomography (256-slice scanner, multiple-detector) and right heart catheterization. Different types of biodegradable nitride iron stents were implanted. TTE was performed serially 1 day, 1 month and 3 months after the procedure to evaluate the rate of restenosis and right ventricular function. Results: Stenting was successful in 11 patients. There were no major adverse cardiovascular events related to the device or to the procedure. Blood perfusion in the branch pulmonary artery was improved immediately. At follow-up, there was no significant restenosis that required re-intervention. None of the patients suffered from in-stent thrombosis, vascular embolism, stent displacement or heart failure. Compared with normal values, there were statistical with regards to FAC, E/A and E'/A'. Furthermore, we found that TAPSE correlated significantly with pulsed Doppler S wave (p = 0.008) and left ventricular ejection fraction (p < 0.01). The early trans-tricuspid inflow velocities E/E' (tissue doppler at the lateral tricuspid annulus) correlated significantly with E'/A' (p = 0.009). FAC and E'/A' were statistically different from those prior to stenting (p = 0.041 and p = 0.035) when tested one month postoperatively. At three months postoperatively, only E/A showed a statistical difference (p = 0.015). Conclusion: Our analysis suggests that biodegradable nitride iron stents are feasible, safe, and effective in children. Some small improvements were observed in right ventricular systolic and diastolic function after successful transcatheter intervention, although change was not statistically significant due to the small sample number. (A clinical Trial to Evaluate the Safety and Efficacy of IBS Angel in Patients With Pulmonary Artery Stenosis (IRIS); NCT04973540).
ABSTRACT
Magnesium (Mg)-based materials are considered as potential materials for biodegradable vascular stents, and some Mg-based stents have obtained regulatory approval. However, the development and application of Mg-based stents are still restricted by the rapid degradation rate of Mg and its alloys. In order to screen out the desirable Mg-based materials for stents, the degradation behavior still needs further systematic study, especially the degradation behavior under the action of near-physiological fluid. Currently, the commonly used Mg-based vascular stent materials include pure Mg, AZ31, and WE43. In this study, we systematically evaluated their corrosion behaviors in a dynamic environment and studied the effect of their degradation products on the behavior of vascular cells. The results revealed that the corrosion rate of different Mg-based materials was related to the composition of the elements. The dynamic environment accelerated the corrosion of Mg-based materials. All the same, AZ31 still shows good corrosion resistance. The effect of corrosive products on vascular cells was beneficial to re-endothelialization and inhibition of smooth muscle cell proliferation at the implantation site of vascular stent materials.
ABSTRACT
INTRODUCTION: Benign airway stenosis is a severe disease that can result in death with improper treatment. Clinicians must know about airway stents to choose the best one in their daily practice. AREAS COVERED: PubMed, Embase, and other electronic databases and websites were searched to identify relevant randomized controlled trials and meta-analyses. This review summarizes different types of airway stents and analyzes their advantages and disadvantages. EXPERT OPINION: Increasing attention has been given to the indications and prognosis of benign airway stenosis treated with different airway stents. With more investigations and data, better alternatives to silicone stents could be developed in the future.
Subject(s)
Airway Obstruction , Bronchial Diseases , Tracheal Stenosis , Airway Obstruction/therapy , Bronchial Diseases/therapy , Constriction, Pathologic/therapy , Humans , Stents , Tracheal Stenosis/therapyABSTRACT
Tetralogy of Fallot with absent pulmonary valve syndrome is commonly associated with trachea-bronchial anomalies, possibly due to airway compression caused by massively dilated pulmonary arteries secondary to severe pulmonary regurgitation. This airway obstruction may persist post-operatively also. We report a case of an infant who required a series of management strategies including bronchial stenting to manage his obstructive symptoms.
ABSTRACT
Biodegradable stents have tremendous theoretical potential as an alternative to bare metal stents and drug-eluting stents for the treatment of obstructive coronary artery disease. Any bioresorbable or biodegradable scaffold material needs to possess optimal mechanical properties and uniform degradation behavior that avoids local and systemic toxicity. Recently, molybdenum (Mo) has been investigated as a potential novel biodegradable material for this purpose. With its proven moderate degradation rate and excellent mechanical properties, Mo may represent an ideal source material for clinical cardiac and vascular applications. The present study was performed to evaluate the mechanical performance of metallic Mo in vitro and the biodegradation properties in vivo. The results demonstrated favorable mechanical behavior and a uniform degradation profile as desired for a new generation ultra-thin degradable endovascular stent material. Moreover, Mo implants in mouse arteries avoided the typical cellular response that contributes to restenosis. There was minimal neointimal hyperplasia over 6 months, an absence of excessive smooth muscle cell (SMC) proliferation or inflammation near the implant, and avoidance of significant harm to regenerating endothelial cells (EC). Qualitative inspection of kidney sections showed a potentially pathological remodeling of kidney Bowman's capsule and glomeruli, indicative of impaired filtering function and development of kidney disease, although quantifications of these morphological changes were not statistically significant. Together, the results suggest that the products of Mo corrosion may exert beneficial or inert effects on the activities of inflammatory and arterial cells, while exerting potentially toxic effects in the kidneys that warrant further investigation.
ABSTRACT
INTRODUCTION: Biomaterial technology due to its lack of or minimal side effects in tissues has great potential. Traditionally biomaterials used were cobalt-chromium, stainless steel and nitinol alloys. Biomaterials such as magnesium (Mg) and zinc (Zn) have good biocompatibility and consequently can be a potential material for medical implants. To date, the effects of AZ31 alloy stent on cell apoptosis are still unclear. The current investigation was designed to determine the effect of AZ31 alloy stent on necrosis and apoptosis of common bile duct (CBD) epithelial cells. MATERIAL AND METHODS: We experimented with application of different concentrations of AZ31 alloy stent to primary mouse extrahepatic bile epithelial cells (MEBECs) and estimated the effect on apoptosis and necrotic cells. Apoptosis and pro-apoptosis expression were estimated through real-time PCR. For in vivo protocol, we used rabbits, implanted the AZ31 bile stent, and estimated its effect on the CBD. AZ31 (40%) concentration showed an effect on the apoptotic and necrotic cells. RESULTS: Real-time PCR revealed that AZ31 (40%) concentration increased the apoptotic genes such as NF-κB, caspase-3, Bax and Bax/Bcl-2 ratio as compared to the control group. In the in vivo experiment, AZ31 alloy stents were implanted into the CBD and showed an effect on the alteration the hematological, hepatic and non-hepatic parameters. CONCLUSIONS: To conclude, it can be stated that AZ31 induces apoptosis via alteration in genes including nuclear factor kappa-B (NF-κB), caspase-3, Bax and Bax/Bcl-2 ratio and improved the hematological, hepatic and non-hepatic parameters.
ABSTRACT
Thanks to the developments in implantable biomaterial technologies, invasive operating procedures, and widespread applications especially in vascular disease treatment, a milestone for interventional surgery was achieved with the introduction of vascular stents. Despite vascular stents providing a solution for embolisms, this technology includes various challenges, such as mechanical, electro-chemical complications, or in-stent restenosis (ISR) risks with long-term usage. Therefore, further development of biomaterial technologies is vital to overcome such risks and problems. For this purpose, recent research has focused mainly on the applications of surface modification techniques on biomaterials and vascular stents to increase their hemocompatibility. ISR risk has been reduced with the development and prevalent usage of the art technology stent designs of drug-eluting and biodegradable stents. Nevertheless, their problems have not been overcome completely. Furthermore, patients using drug-eluting stents are faced with further clinical challenges. Therefore, the bare metal stent, which is the first form of the vascular stent technology and includes the highest ISR risk, is still in common usage for vascular treatment applications. For this reason, further research is necessary to solve the remaining vital problems. In this scoping review, stent-based major cardiac events including ISR are analyzed depending on different designs and material selection in stent manufacturing. Recent and novel approaches to overcome such challenges are stated in detail.