Residuo de Elaeis guineensis (Arecaceae) como absorbente de combustibles para aplicación pasiva en ingeniería contra incendios / Elaeis guineensis (Arecaceae) residue as a fuel sorbent for passive application in fire-fighting engineering

Resumen Introducción: Los vertidos de líquidos inflamables pueden producir accidentes graves, principalmente en plantas industriales y en carretera. Para prevenir la dispersión de derrames, se utilizan diversas formas de recolecta, como la absorción con sólidos porosos. Residuos agroindustriales pueden ser aprovechados como materiales sorbentes de líquidos inflamables. Objetivo: Determinar la capacidad de absorción de las biomasas residuales del pedúnculo de la palma aceitera (Elaeis guineensis) y del endocarpio del fruto de coyol (Acrocomia sp.) para cuatro líquidos orgánicos inflamables. Métodos: Las biomasas residuales de E. guineensis y de Acrocomia sp. se evaluaron como sorbentes para combustibles derramados (diésel, queroseno de aviación, queroseno comercial y gasolina). Se midió la cantidad de líquido absorbida por las biomasas a 24 ºC durante una semana, y su cinética de desorción a 50 ºC, usando balanzas de secado. Resultados: La propiedad sorbente del material de Acrocomia sp. no fue satisfactoria, comparada con el pedúnculo de E. guineensis, debido a diferencias en arquitectura residual del material orgánico. Esta última biomasa muestra una capacidad de absorción para los combustibles de 2.4 ± 0.2 cm3 g-1 a 24 ºC. La diatomita absorbe mayor cantidad de los combustibles estudiados, pero la difusión de estos fluidos a 50 ºC por la matriz mineral es solo 0.26 ± 0.09 veces lo observado para el material de E. guineensis, como resultado del mayor grado de tortuosidad de los poros de la diatomita. Conclusiones: El pedúnculo de palma aceitera (E. guineensis) mostró un adecuado potencial desempeño para la aplicación pasiva en la mitigación de los riesgos de incendio, con respecto a la diatomita. El endocarpio del fruto de Acrocomia sp. no resultó útil para esta operación de recuperación.

Abstract Introduction: Spills of flammable liquids can lead to serious accidents, mainly in industrial plants and on roads. To prevent the spread of spills, various forms of collection are used, such as absorption with porous solids. Agroindustrial waste can be used as sorbent materials for flammable liquids. Objective: To determine the sorption capacity of the residual empty-fruit bunch of oil-palm (Elaeis guineensis) and the macaw palm (Acrocomia sp.) nutshell for four organic flammable liquids. Methods: The residual biomasses of E. guineensis and Acrocomia sp. were assessed as sorbents for spilled fuels (diesel, jet fuel, commercial kerosene, and gasoline). Volumetric measurement of liquid-fuel absorption at 24 ºC was taken during a week. Desorption was measured at 50 ºC as the drying kinetics, by using moisture scales. Results: The sorption capacity of the Acrocomia sp. material was not satisfactory, compared to the E. guineensis residual material, due to differences in the residual architecture of the organic material. This last can absorb 2.4 ± 0.2 cm3 g-1 at 24 ºC, during a one-week period. Diatomite absorbs greater quantities of the organic liquids but, the fluids diffusion at 50 ºC is 0.26 ± 0.09 times more slowly in the mineral matrix, because of the greater pore tortuosity in this mineral matrix. Conclusions: The oil-palm empty fruit bunch of E. guineensis, showed lesser but adequate performance than the sorbing behavior for fire hazard mitigation of diatomite. The nutshell of macaw palm (Acrocomia sp.) did not prove to be useful for this recovery operation.

ZnO nanoparticles encapsulated cellulose-lignin film for antibacterial and biodegradable food packaging.

Foodborne illness caused by consuming foods contaminated by pathogens remains threating to the public health. Despite considerable efforts of using renewable source materials, it is highly demanding to fabricate food packaging with multiple properties including eco-friendliness, bactericidal effect and biocompatibility. Here, sodium lignosulfonate (SL) and ZnO nanoparticles (ZnO NPs) were used as functional filler and structure components, respectively, on the cellulose nanofibers (CNFs)-based films, which endows the produced membrane (CNF/SL-ZnO) the UV-light blocking, antioxidant, and antimicrobial characteristics. Due to the interconnected polymeric structure, the prepared CNF/SL-ZnO films possessed considerable mechanical properties, thermal stability, and good moisture barrier capability. Moreover, the tested samples exhibited an improved shelf life in food packaging. Furthermore, metagenome analysis revealed superior biodegradability of obtained films with negligible side effect on the soil microenvironment. Therefore, the biocompatible, degradable, and antibacterial CNF/SL-ZnO film holds enormous potential for sustainable uses including food packaging.

Electrochemical biofilter enhances performance of volatile organic compounds abatement.

An electrochemical biofilter (EBF) was developed for enhancing the removal of volatile organic compounds (VOCs) through current. The removal efficiency (RE) of toluene exhibited a notable increase of 15% while the biomass growth rate exhibited a corresponding decline of 46% under an optimal current intensity of 50 mA. Meanwhile, the efficacy of the EBF system was markedly enhanced upon the removal of n-hexane, styrene, dichloromethane, and diisobutylene. The results indicated that there was an 11% to 49% increase in RE and a 0% to 64% reduction in biomass growth rates under the influence of the current. The current stimulation inhibited the accumulation of microorganisms, thereby alleviating biofilm clogging. The relative abundance of gram-positive phyla, including Firmicutes and Actinobacteria, increased by 15% and 23%, respectively, while the traditionally dominant genera within the Proteobacteria phylum, such as Rhodococcus and Dokdonella, exhibited a decline. In addition, the presence of hydrogen peroxide, free chlorine, and superoxides in the leachate indicated that the oxidative reaction increased in EBF system. This study provides an attractive pathway for current stimulation to enhance degradation of VOCs and alleviate biofilm clogging.

Chronic obstructive pulmonary disease related to wood smoke and impact of the combined exposure to tobacco.

BACKGROUND: Global Initiative for Chronic Obstructive Lung Disease (GOLD) 2023 highlights the need to explore aetiotypes of chronic obstructive pulmonary disease (COPD) beyond the tobacco-smoking COPD. Exposure to wood smoke (WS) is a risk factor for COPD in women, but the effect of the combined exposure to tobacco smoke (TS) in the general population and among COPD patients, and the characteristics of WS-COPD are unclear. METHOD: This was an analysis of data from PREPOCOL (Prevalence of COPD in Five Colombian Cities Situated at Low, Medium, and High Altitude), a random cross-sectional population-based study (n = 5,539) focusing on the effect of combined WS and TS exposure and WS-COPD characterisation. RESULTS: Prevalence of COPD was significantly higher in those exposed to both WS and TS (16.0%) than in those exposed to WS (6.7%) or TS (7.8%) only (P < 0.001). Exposure to WS was associated with COPD in men (OR 1.53, P = 0.017). WS-COPD individuals were more frequently female, older, shorter and had higher forced expiratory volume in 1 sec (FEV1) (all P < 0.05). Those exposed to both WS and TS had more symptoms and worse airflow limitation (P < 0.001). CONCLUSIONS: This was the first random population-based study showing that WS is an associated risk factor for COPD also in men, and that people exposed to both WS and TS have a significantly higher prevalence of COPD. Similarly, COPD subjects exposed to both types of smoke have more symptoms and greater airflow obstruction. This suggests an additive effect of WS and TS.

CONTEXTE: L'Initiative mondiale pour les maladies pulmonaires obstructives chroniques (Global Initiative for Chronic Obstructive Lung Disease, GOLD) 2023 met en évidence l'importance d'explorer les différents étiotypes de la maladie pulmonaire obstructive chronique (COPD, pour l'anglais « chronic obstructive pulmonary disease ¼) en dehors de la COPD liée au tabagisme. L'exposition à la fumée de bois (WS, pour l'anglais « wood smoke ¼) représente un facteur de risque de la COPD chez les femmes, cependant, l'impact de l'exposition simultanée à la fumée de tabac (TS, pour l'anglais « tobacco smoke ¼) chez la population générale et chez les patients atteints de COPD, ainsi que les caractéristiques spécifiques de la WS-COPD, demeurent peu clairs. MÉTHODES: Il s'agit d'une étude transversale aléatoire basée sur la population (n = 5 539) qui analyse les données de PREPOCOL (Prevalence of COPD in Five Colombian Cities Situated at Low, Medium, and High Altitude). L'étude se concentre sur l'effet de l'exposition combinée à la WS et à la TS ainsi que sur la caractérisation de la WS-COPD. RÉSULTATS: La prévalence de la COPD était significativement plus élevée chez les personnes exposées à la fois à la WS et à la TS (16,0%) que chez celles exposées uniquement à la WS (6,7%) ou à la TS (7,8%) (P < 0,001). L'exposition à la WS était associée à la COPD chez les hommes (OR 1,53 ; P = 0,017). Les personnes atteintes de WS-COPD étaient plus fréquemment des femmes, d'un âge plus avancé, de plus petite taille et présentaient un volume expiratoire maximal en 1 seconde (FEV1) plus élevé (tous P < 0,05). Les personnes exposées à la fois à la WS et à la TS ont montré plus de symptômes et une plus grande limitation du débit d'air (P < 0,001). CONCLUSION: Il s'agit de la première étude aléatoire basée sur la population qui démontre que la WS est un facteur de risque lié à la COPD, même chez les hommes, et que les individus exposés à la fois à la WS et à la TS présentent une prévalence significativement plus élevée de la COPD. De plus, les personnes souffrant de COPD qui sont exposés aux deux types de fumée manifestent davantage de symptômes et une obstruction pulmonaire plus sévère. Cela laisse supposer qu'il y a un effet cumulatif de la WS et de la TS.

Characterization of HDPE microparticles in sludge aerobic digestion and their influence on the process.

The occurrence of microplastics (MPs) in wastewater has been studied in the last years. The high efficiency of their removal from wastewater is linked to their transfer to the sludge. In this work, the effect of high-density polyethylene (HDPE) on aerobic digestion was evaluated and these MPs were monitored, characterizing them by three different techniques. Two parallel batch digesters were monitored. AD-Control (meaning Aerobic Digester) operated as a reference, with no external HDPE particles, whereas these polymeric fragments were introduced to the second aerobic digester (AD-HDPE) using ring pulls as microplastic support. FTIR, Raman spectroscopies and fluorescence analysis of these microparticles showed some relevant results that should be highlighted. Higher fluorescence appeared after 7 days in the digester. It coincided with an increase of active volatile suspended solids (AVSS) in the AD-HDPE, which means that an increase of the microbial activity took place. Despite the presence of HDPE particles in the sludge, the digester performance was not compromised. Besides, the HDPE particles did not affect the microbial diversity (Shannon index) of the bacterial community at the end of the experiment compared to the bacterial community of the aerobic digester control tank. Based on the analysis of the relative abundances of microbial taxa, it was concluded that HDPE had selective effects on sludge microbial community, increasing the relative abundance of Bacteroridota phylum.

Development of an integrated fixed-film activated sludge (IFAS) reactor treating landfill leachate for the biological nitrogen removal through nitritation-denitritation.

The current work investigated the performance of an Integrated Fixed-Film Activated Sludge Sequencing Batch Reactor (IFAS-SBR) for Biological Nitrogen Removal (BNR) from mature landfill leachate through the nitritation-denitritation process. During the experimental period two IFAS-SBR configurations were examined using two different biocarrier types with the same filling ratio (50%). The dissolved oxygen (DO) concentration ranged between 2 and 3 mg/L and 4-6 mg/L in the first (baseline-IFAS) and the second (S8-IFAS) setup, respectively. Baseline-IFAS operated for 542 days and demonstrated a high and stable BNR performance maintaining a removal efficiency above 90% under a Nitrogen Loading Rate (NLR) up to 0.45 kg N/m3-d, while S8-IFAS, which operated for 230 days, was characterized by a limited and unstable BNR performance being unable to operate sufficiently under an NLR higher than 0.20 kg N/m3-d. It also experienced a severe inhibition period, when the BNR process was fully deteriorated. Moreover, S8-IFAS suffered from extensive biocarrier stagnant zones and a particularly poor sludge settleability. The attached biomass cultivated in both IFAS configurations had a negligible content of nitrifying bacteria, probably attributed to the insufficient DO diffusion through the biofilm, caused by the low DO concentration in the liquid in the baseline case and the extensive stagnant zones in the S8-IFAS case. As a result of the high biocarrier filling ratio, the S8-IFAS was unstable and low. This was probably attributed to the mass transfer limitations caused by the biocarrier stagnant zones, which hinder substrate and oxygen diffusion, thus reducing the biomass activity and increasing its vulnerability to inhibitory and toxic factors. Hence, the biocarrier filling fraction is a crucial parameter for the efficient operation of the IFAS-SBR and should be carefully selected taking into consideration both the media type and the overall reactor configuration.

Construction of a BiOI/ZnO heterojunction on biomass Juncus effusus fiber for photodegradation of organic pollutants.

Semiconductor heterojunction engineering and three-dimensional (3D) architecture construction have been considered highly desirable strategies to enhance photocatalytic performance. Herein, a BiOI/ZnO composite photocatalyst with a 3D flower-like architecture was successfully prepared, which was stably immobilized on three-dimensional porous lignocellulosic biomass Juncus effusus (JE) fiber. The outstanding photocatalytic performance of the BiOI/ZnO-JE fiber was confirmed by the degradation of tetracycline hydrochloride (TC, 90%), ciprofloxacin (CIP, 79%), and norfloxacin (NOR, 81%). The enhanced photocatalytic activities were mainly attributed to the synergistic absorption performance of the lignocellulosic JE and the effective transfer and separation of charges. Moreover, the hydroxyl (·OH) and superoxide radicals (·O2-) are the main reactive species in the photocatalytic process according to the analysis. This work may provide a novel perspective for constructing high-performance lignocellulosic-based photocatalytic materials.

The formation of gold in woody biomass combustion ashes.

This paper investigates the enrichment of gold through combustion and ash-leaching techniques utilizing woody biomass as a fuel source. It delves into the formation of gold in ashes derived from the fixed grate combustion of pelletized woody biomass containing noble metals, conducted at a pilot-scale boiler. The biomass sample was gathered from a brownfield land at an abandoned mining area, avoiding induced phytoextraction. The fuel contained <0.05 mg/kg gold, while the bottom ash, after heat exchanger ash, deposited ash, and fly ash contained 1.52 mg/kg, 1.99 mg/kg, 2.64 mg/kg, and 3.52 mg/kg of gold, respectively. Although the amount of fly ash is lower compared to bottom ash, the concentration of gold is the highest in fly ash, which follows the after heat exchanger ash and bottom ash. The concentration of gold was enriched by a three-stage procedure of water leaching, acid leaching (10 % HCl), and alkaline leaching (5 % NaOH), after which 12.1 mg/kg and 12.6 mg/kg gold was found in the residues obtained from leached bottom ash and deposited ash, respectively. SEM was utilized to depict the morphology of gold, which appears in bottom ash as individual neat particles with a purity higher than 98 %. Pure gold particles in the size of 1-2 µm are presented in the after heat exchanger ash; meanwhile, gold in fly ash is primarily associated with potassium, sodium, sulfur, and oxygen. The findings in this study pave the way for reclaiming gold from bio-ores as well as assist in better understanding the formation of this precious metal in these secondary resources.

Harvesting insect pests for animal feed: potential to capture an unexploited resource.

The demand for animal protein grows as the human population increases. Technological and genetic advances in traditional animal agriculture will not produce enough protein to meet future needs without significant innovations such as the use of insects as protein sources. Insect farming is growing insects, whereas insect harvesting is collecting insects from their natural habitats to produce high-quality protein for animal feed or human food. Intensive agricultural environments produce tremendous quantities of pestiferous insects and with the right harvest technologies these insects can be used as a protein supplement in traditional animal daily rations. An avenue to exploit these insects is to use traps such as the United States Department of Agriculture-Biomass Harvest Trap (USDA-BHT) to efficiently attract, harvest, and store insects from naturally abundant agricultural settings. The modular design allows for a low cost, easy to build and fix device that is user friendly and has customizable attractants to target various pest species. Although insect harvesting faces substantial challenges, including insect biomass quantity, seasonal abundance and preservation, food safety, and economic and nutritional evaluation, the potential for utilizing these pests for protein shows tremendous promise. In this forum, insect harvesting is discussed, including its potential, limitations, challenges, and research needs. In addition, the use of a mass trapping device is discussed as a tool to increase the biomass of insects collected from the environment.

Conceptualization, design, and construction of a novel insect mass trapping device: the USDA Biomass Harvest Trap (USDA-BHT).

The use of insects as animal feed has the potential to be a green revolution for animal agriculture as insects are a rich source of high-quality protein. Insect farming must overcome challenges such as product affordability and scalability before it can be widely incorporated as animal feed. An alternative is to harvest insect pests from the environment using mass trapping devices and use them as animal feed. For example, intensive agricultural environments generate large quantities of pestiferous insects and with the right harvest technologies, these insects can be used as a protein supplement in traditional animal daily rations. Most insect trapping devices are limited by the biomass they can collect. In that context, and with the goal of using wild collected insects as animal feed, the United States Department of Agriculture-Biomass Harvest Trap (USDA-BHT) was designed and built. The USDA-BHT is a valuable mass trapping device developed to efficiently attract, harvest, and store flying insects from naturally abundant agricultural settings. The trap offers a modular design with adjustable capabilities, and it is an inexpensive device that can easily be built with commonly available parts and tools. The USDA-BHT is also user-friendly and has customizable attractants to target various pest species.

A review on vulnerable atmospheric aerosol nanoparticles: Sources, impact on the health, ecosystem and management strategies.

The Earth's atmosphere contains ultrafine particles known as aerosols, which can be either liquid or solid particles suspended in gas. These aerosols originate from both natural sources and human activities, termed primary and secondary sources respectively. They have significant impacts on the environment, particularly when they transform into ultrafine particles or aerosol nanoparticles, due to their extremely fine atomic structure. With this context in mind, this review aims to elucidate the fundamentals of atmospheric-derived aerosol nanoparticles, covering their various sources, impacts, and methods for control and management. Natural sources such as marine, volcanic, dust, and bioaerosols are discussed, along with anthropogenic sources like the combustion of fossil fuels, biomass, and industrial waste. Aerosol nanoparticles can have several detrimental effects on ecosystems, prompting the exploration and analysis of eco-friendly, sustainable technologies for their removal or mitigation.Despite the adverse effects highlighted in the review, attention is also given to the generation of aerosol-derived atmospheric nanoparticles from biomass sources. This finding provides valuable scientific evidence and background for researchers in fields such as epidemiology, aerobiology, and toxicology, particularly concerning atmospheric nanoparticles.

Characterizing Chemical, Environmental, and Stimulated Subcellular Physical Characteristics of Size-Fractionated PMs Down to PM0.1.

Air pollution, especially particulate matter (PM), is a significant environmental pollution worldwide. Studying the chemical, environmental, and life-related cellular physical characteristics of size-fractionated PMs is important because of their different degrees of harmful effects on human respiratory tracts and organ systems, causing severe diseases. This study evaluates the chemical components of size-fractionated PMs down to PM0.1 collected during a biomass-burning episode, including elemental/organic carbon and trace elements. Single particle sizes and distributions of PM0.1, PM0.5-0.1, PM1.0-0.5, and PM2.5-1.0 were analyzed by scanning electron microscopy and Zeta sizer. Two commonly used cell lines, e.g., HeLa and Cos7 cells, and two respiratory-related cell lines including lung cancer/normal cells were utilized for cell cytotoxicity experiments, revealing the key effects of particle sizes and concentrations. A high-speed scanning ion conductance microscope explored particle-stimulated subcellular physical characteristics for all cell lines in dynamics, including surface roughness (SR) and elastic modulus (E). The statistical results of SR showed distinct features among different particle sizes and cell types while a E reduction was universally found. This work provides a comprehensive understanding of the chemical, environmental, and cellular physical characteristics of size-fractionated PMs and sheds light on the necessity of controlling small-sized PM exposures.

In-situ electrochemical impedance analysis of a commercial SOFC stack fueled by real wood gas.

The combination of solid oxide fuel cells (SOFCs) and wood gasification has the potential to significantly increase renewable electricity production and decrease emissions. Depending on the quality of the wood gas, degradation processes have a significant impact on the reliability and lifetime of the SOFC. Using electrochemical impedance spectroscopy (EIS) and subsequent distribution of relaxation times (DRT) analysis, the impact on the degradation of coupling wood gasification with a commercial SOFC stack is determined in this study. The thermal behavior of the SOFC stack under various operating conditions, as well as various synthetic wood gas mixtures classified by their hydrogen-to-carbon (H/C) ratio, was assessed. The decrease in the H/C ratio from 8 to 1, observed during syngas and real wood gas operation, leads to a rightward shift in the Nyquist plots, suggesting an increase in the SOFC stack's impedance. Correlations between variations in the H/C ratio and their effects on anodic electrooxidation, ionic conduction, gas transport, and diffusion were identified using DRT analysis to interpret the EIS results. By incorporating an upstream desulfurization system and ensuring an H/C ratio greater than 2, the coupling of biomass gasification with the SOFC stack was stable to degradation issues.

Green synthesis of biomass-derived carbon quantum dots for photocatalytic degradation of methylene blue.

Water pollution, significantly influenced by the discharge of synthetic dyes from industries, such as textiles, poses a persistent global threat to human health. Among these dyes, methylene blue, particularly prevalent in the textile sector, exacerbates this issue. This study introduces an innovative approach to mitigate water pollution through the synthesis of nanomaterials using biomass-derived carbon quantum dots (CQDs) from grape pomace and watermelon peel. Utilizing the hydrothermal method at temperatures between 80 and 160 °C over periods ranging from 1 to 24 h, CQDs were successfully synthesized. A comprehensive characterization of the CQDs was performed using UV-visible spectroscopy, Fourier-transform infrared spectroscopy, dynamic light scattering, Raman spectroscopy, and luminescence spectroscopy, confirming their high quality. The photocatalytic activity of the CQDs in degrading methylene blue was evaluated under both sunlight and incandescent light irradiation, with measurements taken at 20 min intervals over a 2 h period. The CQDs, with sizes ranging from 1-10 nm, demonstrated notable optical properties, including upconversion and down-conversion luminescence. The results revealed effective photocatalytic degradation of methylene blue under sunlight, highlighting the potential for scalable production of these cost-effective catalytic nanomaterials for synthetic dye degradation.

Intraspecific variation in Janzen-Connell effect is mediated by stress and plant-soil feedbacks.

Janzen-Connell (JC) effects, hypothesized to be partially driven by negative plant-soil feedbacks (PSFs), are considered to be a key mechanism that regulates tropical forest plant diversity and coexistence. However, intraspecific variation in JC effects may weaken this mechanism, with the strength of PSFs being a potentially key variable process. We conducted a manipulated experiment with seedlings from two populations of Pometia pinnata (Sapindaceae), a tropical tree species in southwest China. We aimed to measure the intraspecific difference in PSF magnitude caused by inoculating the soil from different P. pinnata source populations and growing seedlings under differing light intensity and water availability treatments, and at varying plant densities. We found negative PSFs for both populations with the inoculum soil originating from the same sites, but PSFs differed significantly with the inoculum soil from different sites. PSF strength responded differently to biotic and abiotic drivers; PSF strength was weaker in low moisture and high light treatments than in high moisture and low light treatments. Our study documents intraspecific variation in JC effects: specifically, P. pinnata have less defenses to their natively-sourced soil, but are more defensive to the soil feedbacks from soil sourced from other populations. Our results imply that drought and light intensity tended to weaken JC effects, which may result in loss of species diversity with climate change.

Self-Adapting Biomass Hydrogel Embodied with miRNA Immunoregulation and Long-Term Bacterial Eradiation for Synergistic Chronic Wound Therapy.

Chronic wound rescue is critical for diabetic patients but is challenging to achieve with a specific and long-term strategy. The prolonged bacterial inflammation is particularly prevalent in hyperglycemia-induced wounds, usually leading to severe tissue damage. Such a trend could further suffer from an environmental suitability provided by macrophages for persisting Staphylococcus aureus (S. aureus) and even deteriorate by their mutual reinforcement. However, the strategy of both suppressing bacteria growth and immunoreprogramming the inflammatory type of macrophages to break their vicious harm to wound healing is still lacking. Here, a self-adapting biomass carboxymethyl chitosan (CMC) hydrogel comprising immunomodulatory nanoparticles is reported to achieve Gram-negative/Gram-positive bacteria elimination and anti-inflammatory cytokines induction to ameliorate the cutaneous microenvironment. Mechanistically, antibacterial peptides and CMCs synergistically result in a long-term inhibition against methicillin-resistant S. aureus (MRSA) over a period of 7 days, and miR-301a reprograms the M2 macrophage via the PTEN/PI3Kγ/mTOR signaling pathway, consequently mitigating inflammation and promoting angiogenesis for diabetic wound healing in rats. In this vein, immunoregulatory hydrogel is a promising all-biomass dressing ensuring biocompatibility, providing a perspective to regenerate cutaneous damaged tissue, and repairing chronic wounds on skin.

Alternative green application areas for olive pomace catalytic pyrolysis biochar obtained via marble sludge catalyst.

Evaluating industrial wastes in the system with minimum preprocessing and generation economically valuable products from them have critical importance. In this regard, especially cheap, wieldy, and readily available catalysts have been researched to increase variety of useful products in pyrolysis systems, to reduce process time, and to increase quality and diversity of products. Therefore, in this study, marble sludge (named K1) was evaluated as catalyst at different dosages (10%, 20%, 30%, 50%) and pyrolysis temperatures (300, 500, 700 °C) in olive pomace (OP) pyrolysis and; the potential green applications of produced new biochars at new usage areas with different purposes based on characteristics were investigated. ANOVA test results showed that temperature and catalysts ratio had significant effect on pyrolysis product yields since significance value for K1 and temperature was lower than 0.05 for pyrolysis products. OP-K1 biochars had alkaline properties and high earth metal quantities. Moreover, increment in K1 ratio and temperature resulted in decrement of the biochar surface acidity. Therefore, it can be indicated that these biochars can have a potential usage for anaerobic digestion processes, lithium-ion batteries, and direct carbon solid oxide fuel cell (DC-SOFC) but further electrochemical property test should be performed. Moreover, produced biochars can be alternative fuels in some processes instead of coal since they have low S content and high heat values. Consequently, it is foreseen that produced biochars will have an important place in the development of potential usage areas with a new and environmentally friendly approach in different areas apart from the conventional uses of catalytic pyrolysis chars.

Phosphorous - Containing Activated Carbon Derived From Natural Honeydew Peel Powers Aqueous Supercapacitors.

The introduction of phosphorous (P), and oxygen (O) heteroatoms in the natural honeydew chemical structure is one of the most effective, and practical approaches to synthesizing activated carbon for possible high-performance energy storage applications. The performance metrics of supercapacitors depend on surface functional groups and high-surface-area electrodes that can play a dominant role in areas that require high-power applications. Here, we report a phosphorous and oxygen co-doped honeydew peel-derived activated carbon (HDP-AC) electrode with low surface area for supercapacitor via H3PO4 activation. This activator form phosphorylation with cellulose fibers in the HDP. The formation of heteroatoms stabilizes the cellulose structure by preventing the formation of levoglucosan (C6H10O5), a cellulose combustion product, which would otherwise offer a pathway for a substantial degradation of cellulose into volatile products. Therefore, heteroatom doping has proved effective, in improving the electrochemical properties.  The improved performance is attributed to the high phosphorous doping with a hierarchical porous structure, which enables the transportation of ions at higher current rates. The high specific capacitance of 486, and 478 F/g at 0.6, and 1.3 A/g in 1M H2SO4 electrolyte with a prominent retention of 98% is observed for 2M H3PO4 having an impregnation ratio of 1:4.

Effect of storage conditions on lignocellulose biofuels properties.

This article examines the effects of different storage conditions on selected physicochemical properties of three types of agro-biomass pellets: sunflower husks, wheat straw and hemp hurds, and wood pellets. The tests were carried out in a climatic chamber, which allows simulation of real storage conditions, i.e. conditions with high air humidity and variable (±) ambient air temperatures. The results showed higher degradability of agro-biomass pellets compared to woody biomass. The pellets degraded to a less extent at varying ± temperatures than at high humidity (90% RH). After complete moisture saturation, durability decreases for agro-pellets by an average of 9%, while after freezing and defreezing for sunflower husk pellets and woody pellets durability decreases by 2%, and for hemp hurd pellets by 11%. In contrast, strength-by-dropping index for agro-pellets decreased by 20% after being in the environment (30 °C and 90%RH) and 15% under varying temperature conditions. No change in the energy parameters of all pellets in the dry matter was noted. On the other hand, an increase in the moisture content of pellets when they are stored under different environmental conditions results in a decrease in calorific value.

An overview of biochar production techniques and application in iron and steel industries.

Integrating innovation and environmental responsibility has become important in pursuing sustainable industrial practices in the contemporary world. These twin imperatives have stimulated research into developing methods that optimize industrial processes, enhancing efficiency and effectiveness while mitigating undesirable ecological impacts. This objective is exemplified by the emergence of biochar derived from the thermo-chemical transformation of biomass. This review examines biochar production methods and their potential applications across various aspects of the iron and steel industries (ISI). The technical, economic, and sustainable implications of integrating biochar into the ISI were explored. Slow pyrolysis and hydrothermal carbonization are the most efficient methods for higher biochar yield (25-90%). Biochar has several advantages- higher heating value (30-32 MJ/kg), more porosity (58.22%), and significantly larger surface area (113 m2/g) compared to coal and coke. However, the presence of biochar often reduces fluidity in a coal-biochar mixture. The findings highlighted that biochar production and implementation in ISI often come with higher costs, primarily due to the higher expense of substitute fuels compared to traditional fossil fuels. The economic viability and societal desirability of biochar are highly uncertain and vary significantly based on factors such as location, feedstock type, production scale, and biochar pricing, among others. Furthermore, biomass and biochar supply chain is another important factor which determines its large scale implementation. Despite these challenges, there are opportunities to reduce emissions from BF-BOF operations by utilizing biochar technologies. Overall, the present study explored integrating diverse biochar production methods into the ISI aiming to contribute to the ongoing research on sustainable manufacturing practices, underscoring their significance in shaping a more environmentally conscious future.