Biodiesel production from eggshells derived bio-nano CaO catalyst - microemulsion fuel blends for up-gradation of biodiesel.

The utilization of bio-oil derived from biomass presents a promising alternative to fossil fuels, though it faces challenges when directly applied in diesel engines. Microemulsification has emerged as a viable strategy to enhance bio-oil properties, facilitating its use in hybrid fuels. This study explores the microemulsification of Jatropha bio-oil with ethanol, aided by a surfactant, to formulate a hybrid liquid fuel. Additionally, a bio-nano CaO heterogeneous catalyst synthesized from eggshells is employed to catalyse the production of Jatropha biodiesel from the microemulsified fuel using microwave irradiation. The catalyst is characterized through UV-Vis, XRD, and SEM analysis. The investigation reveals a significant reduction in CO, CO2, and NOX emissions with the utilization of microemulsion-based biodiesel blends. Various blends of conventional diesel, Jatropha biodiesel, and ethanol are prepared with different ethanol concentrations (5, 10, and 20 wt%). Engine performance parameters, including fuel consumption, NOX emission, and brake specific fuel consumption, are analyzed. Results indicate that the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend exhibits superior performance compared to conventional diesel, Jatropha biodiesel, and other blends. The fuel consumption of the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend is measured at 554.6 g/h, surpassing that of conventional diesel and other biodiesel blends. The presence of water (0.14 %) in the blend reduces the heating value, consequently increasing the energy requirement. CO and CO2 emissions for the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend are notably lower compared to conventional C-18 hydrocarbons and various biodiesel blends. These findings accentuate the efficacy of the microemulsion process in enhancing fuel characteristics and reducing emissions. Further investigations could explore optimizing the emulsifying agents and their impact on engine performance and emission characteristics, contributing to the advancement of sustainable fuel technologies.

Efficacy of Shen Cao Gan Jiang Tang on Non-severe COVID-19 Patients: A Multicenter, Randomized, Open-Label Clinical Trial.

Background In the face of the escalating COVID-19 pandemic amid shortages of medications and vaccines, a Vietnamese herbal formula known as Shen Cao Gan Jiang Tang (SCGJT) has been put into use for non-severe COVID-19 patients. This study aims to assess its efficacy and safety. Methods A multicenter, open-label, randomized controlled trial was conducted on 300 patients with non-severe COVID-19, randomly assigned into two groups: 150 receiving standard care (control group) and 150 receiving additional SCGJT for 10 days (SCGJT group). Time to resolution of symptoms, symptom severity, disease progression, time to discharge, the National Early Warning Score 2 (NEWS2) score, usage of Western drugs, time to viral clearance, and safety outcomes were continuously monitored. Results The SCGJT group exhibited faster symptom resolution (median: 9 vs. 13 days) and improved symptom severity, including cough, fatigue, hypogeusia, muscle aches, nasal congestion, runny nose, and sore throat, compared to the control group. Although there was a lower rate of severe progression in the SCGJT group (0.7% vs. 4.7%), the difference was not statistically significant. The time to discharge was significantly shorter in the SCGJT group (median: 7 vs. 8 days). Changes in the NEWS2 score did not show significant differences between groups. SCGJT has been demonstrated to reduce the need for symptomatic relief medications and hasten SARS-CoV-2 viral clearance. No adverse events were reported, and routine tests showed no significant differences. Conclusions SCGJT is safe and has potential clinical efficacy in non-severe COVID-19 patients. However, data regarding preventing severe progression remains inconclusive. Further studies should be conducted in light of the current state of the COVID-19 pandemic.

Energy Storage Application of CaO/Graphite Nanocomposite Powder Obtained from Waste Eggshells and Used Lithium-Ion Batteries as a Sustainable Development Approach.

The reuse of waste materials has recently become appealing due to pollution and cost reduction factors. Using waste materials can reduce environmental pollution and product costs, thus promoting sustainability. Approximately 95% of calcium carbonate-containing waste eggshells end up in landfills, unused. These eggshells, a form of bio-waste, can be repurposed as catalytic electrode material for various applications, including supercapacitors, after being converted into CaO. Similarly, used waste battery electrode materials pose environmental hazards if not properly recycled. Various types of batteries, particularly lithium-ion batteries, are extensively used worldwide. The recycling of used lithium-ion batteries has become less important considering its low economic benefits. This necessitates finding alternative methods to recover and reuse the graphite rods of spent batteries. Therefore, this study reports the conversion of waste eggshell into calcium oxide by high-temperature calcination and extraction of nanographite from spent batteries for application in energy storage fields. Both CaO and CaO/graphite were characterized for their structural, morphological, and chemical compositions using XRD, SEM, TEM, and XPS techniques. The prepared CaO/graphite nanocomposite material was evaluated for its efficiency in electrochemical supercapacitor applications. CaO and its composite with graphite powder obtained from used lithium-ion batteries demonstrated improved performance compared to CaO alone for energy storage applications. Using these waste materials for electrochemical energy storage and conversion devices results in cheaper, greener, and sustainable processes. This approach not only aids in energy storage but also promotes sustainability through waste management by reducing landfills.

Ferrate(VI)-based oxidation for ultrafiltration membrane fouling mitigation in shale gas produced water pretreatment: Role of high-valent iron intermediates and hydroxyl radicals.

Ultrafiltration (UF) is increasingly used in the pretreatment of shale gas produced water (SGPW), whereas severe membrane fouling hampers its actual operation. In this work, ferrate(VI)-based oxidation was proposed for membrane fouling alleviation in SGPW pretreatment, and the activation strategies of calcium peroxide (CaO2) and ultraviolet (UV) were selected for comparison. The findings indicated that UV/Fe(VI) was more effective in removing fluorescent components, and the concentration of dissolved organic carbon was reduced by 24.1 %. With pretreatments of CaO2/Fe(VI) and UV/Fe(VI), the terminal specific membrane flux was elevated from 0.196 to 0.385 and 0.512, and the total fouling resistance diminished by 52.7 % and 76.2 %, respectively. Interfacial free energy analysis indicated that the repulsive interactions between pollutants and membrane were notably enhanced by Fe(VI)-based oxidation, thereby delaying the deposition of cake layers on the membrane surface. Quenching and probe experiments revealed that high-valent iron intermediates (Fe(IV)/Fe(V)) played significant roles in both CaO2/Fe(VI) and UV/Fe(VI) processes. Besides, hydroxyl radicals (•OH) were also important reactive species in the UV/Fe(VI) treatment, and the synergistic effect of Fe(IV)/Fe(V) and •OH showed a positive influence on SGPW fouling mitigation. In general, these findings establish a theoretical underpinning for the application of Fe(VI)-based oxidation for UF membrane fouling mitigation in SGPW pretreatment.

Bio-fabrication of calcium oxide nanoparticles from Coccinia grandis as a potential photocatalyst for dye degradation with antimicrobial activity.

In the current study, Coccinia grandis fruit extract was used to synthesize calcium oxide nanoparticles (CaO NPs) in an economical and environmentally friendly manner. UV-Vis spectroscopy and Fourier transform infrared spectroscopy revealed that the phytoconstituents found in Coccinia grandis fruit extract facilitated the production of CaO NPs by acting as better stabilizing, biodegradable, and reducing agents. The synthesized CG-CaO NPs were also tested for photocatalytic activity in the breakdown of selective dyes such as methyl red, methyl orange, and methylene blue in the presence of sunlight. The degradation percentage was determined by analyzing the color removal rates for all dye components. After 6 h of reaction, the IC50 values for methyl red, methyl orange, as well as methylene blue dyes were 73, 107, and 133, respectively. The CG-CaO NPs were further evaluated for their antimicrobial activity against specific bacteria and fungi using the agar-well diffusion method. 200 µg/mL CG-CaO NPs inhibited Aspergillus niger, Escherichia coli, Salmonella typhi, Streptococcus mutans, and Staphylococcus aureus at zones of 13, 14, 16, 14, and 15 mM, respectively. Further checkerboard assay confirmed the antagonism effect with gentamicin. Also, Artemia salina toxicity assay showed that the LD50 value of CaO NPs was 400 µg/mL of CaO NPs. The findings confirm that Coccinia grandis-mediated CG-CaO NPs can be used effectively in antimicrobial and environmental settings.

Electrospun scaffolds based on a PCL/starch blend reinforced with CaO nanoparticles for bone tissue engineering.

Electrospun nanocomposite scaffolds with improved bioactive and biological properties were fabricated from a blend of polycaprolactone (PCL) and starch, and then combined with 5 wt% of calcium oxide (CaO) nanoparticles sourced from eggshells. SEM analyses showed scaffolds with fibrillar morphology and a three-dimensional structure. The hydrophilicity of scaffolds was improved with starch and CaO nanoparticles, which was evidenced by enhanced water absorption (3500 %) for 7 days. In addition, PCL/Starch/CaO scaffolds exhibited major degradation, with a mass loss of approximately 60 % compared to PCL/Starch and PCL/CaO. The PCL/Starch/CaO scaffolds decreased in crystallinity as intermolecular interactions between the nanoparticles retarded the mobility of the polymeric chains, leading to a significant increase in Young's modulus (ca. 60 %) and a decrease in tensile strength and elongation at break, compared to neat PCL. SEM-EDS, FT-IR, and XRD analyses indicated that PCL/Starch/CaO scaffolds presented a higher biomineralization capacity due to the ability to form hydroxyapatite (HA) in their surface after 28 days. The PCL/Starch/CaO scaffolds showed attractive biological performance, allowing cell adhesion and viability of M3T3-E1 preosteoblastic cells. In vivo analysis using a subdermal dorsal model in Wistar rats showed superior biocompatibility and improved resorption process compared to a pure PCL matrix. This biological analysis suggested that the PCL/Starch/CaO electrospun mats are suitable scaffolds for guiding the regeneration of bone tissue.

An in-depth investigation of global sea surface temperature behavior utilizing chaotic modeling.

Sea surface temperature (SST), with its complex and dynamic behavior, is a major driver of ocean-atmosphere interactions. The purpose of this study is to investigate the behavior of SST and its prediction using a chaotic approach. Average mutual information (AMI) and Cao methods were used to reconstruct the phase space. The Lyapunov exponent and correlation dimension were used to investigate chaos. The Lyapunov exponent index was used to predict SST with a 5-year average prediction horizon using the local prediction method between 2023 and 2027. The results showed a 3-month delay time for the Pacific and Antarctic Oceans, and a 2-month delay time for the Atlantic, Indian, and Arctic Oceans. The optimal embedding dimension for all oceans is between 6 and 7. Our analysis reveals that the dynamics of SST in all oceans exhibit varying degrees of chaos, as indicated by the correlation dimension. The local prediction method achieves relatively accurate short-term SST predictions due to the clustering of SST points around specific attractors in the phase space. However, in the long term, the accuracy of this method decreases as the points in the phase space of SST can spread randomly. The model performance ranking with a Percent Mean Relative Absolute Error shows that the Indian Ocean has the best performance compared to other oceans, while the Atlantic, Pacific, and Antarctic and Arctic Oceans are in the next ranks. This study contributes to understanding the dynamics of SST and has practical value for use in the development of climate models.

Biochemical analysis of three red grapevine varieties during three phenological periods grown under Mediterranean climate conditions.

In Mediterranean regions, severe summers are becoming more common, leading to restrictions to vine productivity and yield quality, requiring sustainable practices to support this sector. We assessed the behaviour of three red grapevine varieties from the Douro Region to examine their tolerance to summer climate stress from the perspective that the less common varieties may have potential for increased use in a climate change scenario. Leaf and fruit biochemical profile, antioxidant activity and fruit colorimetric parameters were assessed at different phenological stages in Aragonez (AR), Tinto Cão (TC) and Touriga Nacional (TN) grape varieties. All three varieties exhibit significant variability in phenological timing, influenced by genetic and environmental factors. Photosynthetic pigment strategies differed among varieties. Chlorophyll content in AR was high to cope with high radiation, while TN displaying a balanced approach, and TC had lower pigment levels, with higher levels of phenolics, antioxidants, and soluble sugars, particularly during stress. The variations in berry biochemical profile highlight the distinct characteristics of the varieties. TC and TN show potential for coping with climate change, having elevated total acidity, while AR has larger and heavier berries with distinct coloration. These findings reinforce the need to study the behaviour of different varieties in each Terroir, to understand their diverse strategies to deal with summer climate stress. This will help in selecting the most suitable variety for these conditions under vineyard management in the Douro Region.

A oferta do café de rua nas capitais São Paulo e Vitória / The offer of coffee on the streets of the state capitals São Paulo and Vitória / La oferta de café en las calles de las capitales estatales São Paulo y Vitória

A pandemia gerou impactos sociais e econômicos, como o trabalho informal dos que se ocupam do serviço de café de rua, ampliado na retomada pós-isolamento. O artigo analisa as significações construídas pelas instalações do serviço nas ruas de São Paulo (SP) e Vitória (ES), enquanto manifestações do empreendedo-rismo por necessidade. O corpus foi coletado em dias úteis, no início das manhãs, em diversos pontos das capitais. A semiótica discursiva sustentou a análise, e o seu método permitiu traçar isotopias conectoras de figuras e temas. Os resultados apontam para comunicação dos sentidos da informalidade, casualidade e familiaridade, marcados pela presença feminina, pela autonomia imposta aos sujeitos produtor/vendedor e consumidor e pela conexão entre a energia proporcionada pela bebida e o trabalho. Esses significadosvêm embebidos no risco vivido por esses sujeitos, aconchegados entre si e alijados da proteção de políticas públicas de trabalho, condições sanitárias, serviços de transporte e saúde.

The pandemic has generated social and economic impacts, such as the informal work of those who sell coffee on the streets, expanded in the post-isolation resumption. The article analyzes the meanings constructed by the service facilities in São Paulo (SP) and Vitória (ES), as demonstrations of the entrepreneurship by necessity. The corpus was collected on weekdays, in places of the state capitals. Discursive semiotics underpins the analysis, suggesting connective isotopies of figures and themes. The results point to the communication of the senses of informality, casualness and familiarity, marked by the female presence, by the autonomy imposed on the subjects producer/seller and consumer and by the connection between the energy given by the drink and the work. These meanings are embedded in the risk experienced by these subjects, snuggled among themselves and excluded from the protection of public policies of work, sanitary conditions, transportation and health services.

La pandemia generó impactos sociales y económicos, como el trabajo informal de quienes se ocupan del servicio de café en las calles, ampliado en la reanudación post-aislamiento. El artículo analiza los signifi-cados construidos por las instalaciones de servicios en las calles de São Paulo (SP) y Vitória (ES), como manifestaciones de emprendimiento por necesidad. El corpus fue recolectado entresemana, en puntos de las capitales. La semiótica discursiva sustenta el análisis y permitió trazar isotopías conectoras de figuras y temas. Los resultados apuntan para la comunicación de los significados de informalidad, marcados por la presencia femenina, por la autonomía impuesta a los sujetos productor/vendedor y consumidor, y por la conexión entre la energía dada por la bebida y el trabajo. Estos significados están incrustados en el riesgo vivido por estos sujetos, y excluidos de la protección de las políticas públicas laborales, las condiciones sanitarias, los servicios de transporte y salud.

Golm1 facilitates the CaO2-DOPC-DSPE200-PEI -CsPbBr3 QDs -induced apoptotic death of hepatocytes through the stimulation of mitochondrial autophagy and mitochondrial reactive oxygen species production through interactions with P53/Beclin-1/Bcl-2.

Mitophagy is a distinct physiological process that can have beneficial or deleterious effects in particular tissues. Prior research suggests that mitophagic activity can be triggered by CaO2-PM-CsPbBr3 QDs, yet the specific role that mitophagy plays in hepatic injury induced by CaO2-PM-CsPbBr3 QDs has yet to be established. Accordingly, in this study a series of mouse model- and cell-based experiments were performed that revealed the ability of CaO2-PM-CsPbBr3 QDs to activate mitophagic activity. Golm1 was upregulated in response to CaO2-PM-CsPbBr3 QDs treatment, and overexpressing Golm1 induced autophagic flux in the murine liver and hepatocytes, whereas knocking down Golm1 had the opposite effect. CaO2-PM-CsPbBr3 QDs were also able to Golm1 expression, in turn promoting the degradation of P53 and decreasing the half-life of this protein. Overexpressing Golm1 was sufficient to suppress the apoptotic death of hepatocytes in vitro and in vivo, whereas the knockdown of Golm1 had the opposite effect. The ability of Golm1 to promote p53-mediated autophagy was found to be associated with the disruption of Beclin-1 binding to Bcl-2, and the Golm1 N-terminal domain was determined to be required for p53 interactions, inducing autophagic activity in a manner independent of helicase activity or RNA binding. Together, these results indicate that inhibiting Golm1 can promote p53-dependent autophagy via disrupting Beclin-1 binding to Bcl-2, highlighting a novel approach to mitigating liver injury induced by CaO2-PM-CsPbBr3 QDs.

Green preparation of CaO-based CO2 adsorbent by calcium-induced hydrogenation of shell wastes at room/moderate temperature.

Capturing CO2 using clamshell/eggshell-derived CaO adsorbent can not only reduce carbon emissions but also alleviate the impact of trash on the environment. However, organic acid was usually used, high-temperature calcination was often performed, and CO2 was inevitably released during preparing CaO adsorbents from shell wastes. In this work, CaO-based CO2 adsorbent was greenly prepared by calcium-induced hydrogenation of clamshell and eggshell wastes in one pot at room/moderate temperature. CO2 adsorption experiments were performed in a thermogravimetric analyzer (TGA). The adsorption performance of the adsorbents obtained from the mechanochemical reaction (BM-C/E-CaO) was superior to that of the adsorbents obtained from the thermochemical reaction (Cal-C/E-CaO). The CO2 adsorption capacity of BM-C-CaO at 650 °C is up to 36.82 wt%, but the adsorption decay rate of the sample after 20 carbonation/calcination cycles is only 30.17%. This study offers an alternative energy-saving method for greenly preparing CaO-based adsorbent from shell wastes.

Biodiesel Production by Methanolysis of Rapeseed Oil-Influence of SiO2/Al2O3 Ratio in BEA Zeolite Structure on Physicochemical and Catalytic Properties of Zeolite Systems with Alkaline Earth Oxides (MgO, CaO, SrO).

Alkaline earth metal oxide (MgO, CaO, SrO) catalysts supported on BEA zeolite were prepared by a wet impregnation method and tested in the transesterification reaction of rapeseed oil with methanol towards the formation of biodiesel (FAMEs-fatty acid methyl esters). To assess the influence of the SiO2/Al2O3 ratio on the catalytic activity in the tested reaction, a BEA zeolite carrier material with different Si/Al ratios was used. The prepared catalysts were tested in the transesterification reaction at temperatures of 180 °C and 220 °C using a molar ratio of methanol/oil reagents of 9:1. The transesterification process was carried out for 2 h with the catalyst mass of 0.5 g. The oil conversion value and efficiency towards FAME formation were determined using the HPLC technique. The physicochemical properties of the catalysts were determined using the following research techniques: CO2-TPD, XRD, BET, FTIR, and SEM-EDS. The results of the catalytic activity showed that higher activity in the tested process was confirmed for the catalysts supported on the BEA zeolite characterized by the highest silica/alumina ratio for the reaction carried out at a temperature of 220 °C. The most active zeolite catalyst was the 10% CaO/BEA system (Si/Al = 300), which showed the highest triglyceride (TG) conversion of 90.5% and the second highest FAME yield of 94.6% in the transesterification reaction carried out at 220 °C. The high activity of this system is associated with its alkalinity, high value of the specific surface area, the size of the active phase crystallites, and its characteristic sorption properties in relation to methanol.

Enhanced phenanthrene biodegradation in river sediments by harnessing calcium peroxide nanoparticles and minerals in Sphingomonas sp. DSM 7526 cultivation.

Coupling chemical oxidation and biodegradation to remediate polycyclic aromatic hydrocarbon (PAH)-contaminated sediment has recently gained significant attention. In this study, calcium peroxide nanoparticles (nCaO2) were utilized as an innovative oxygen-releasing compound for in-situ chemical oxidation. The study investigates the bioremediation of phenanthrene (PHE)-contaminated sediment inoculated with Sphingomonas sp. DSM 7526 bacteria and treated with either aeration or nCaO2. Using three different culture media, the biodegradation efficiencies of PHE-contaminated anoxic sediment, aerobic sediment, and sediment treated with 0.2% w/w nCaO2 ranged from 57.45% to 63.52%, 69.87% to 71.00%, and 92.80% to 94.67%, respectively. These values were significantly higher compared to those observed in non-inoculated sediments. Additionally, the type of culture medium had a prominent effect on the amount of PHE removal. The presence of minerals in the culture medium increased the percentage of PHE removal compared to distilled water by about 2-10%. On the other hand, although the application of CaO2 nanoparticles negatively impacted the abundance of sediment bacteria, resulting in a 30-42% decrease in colony-forming units after 30 days of treatment, the highest PHE removal was obtained when coupling biodegradation and chemical oxidation. These findings demonstrate the successful application of bioaugmentation and chemical oxidation processes for treating PAH-contaminated sediment.

Enhanced multi-metals stabilization: Synergistic insights from hydroxyapatite and peroxide dosing strategies.

Sediment contamination by heavy metals is a pressing environmental concern. While in situ metal stabilization techniques have shown promise, a great challenge remains in the simultaneous immobilization of multi-metals co-existing in contaminated sediments. This study aims to address this challenge by developing a practical method for stabilizing multi-metals by hydroxyapatite and calcium peroxide (HAP/CaO2) dosing strategies. Results showed that dosing 15.12 g of HAP/CaO2 at a ratio of 3:1 effectively transformed labile metals into stable fractions, reaching reaction kinetic equilibrium within one month with a pseudo-second-order kinetic (R2 > 0.98). The stable fractions of Nickel (Ni), Chromium (Cr), and lead (Pb) increased by approximately 16.9 %, 26.7 %, and 21.9 %, respectively, reducing heavy metal mobility and ensuring leachable concentrations complied with the stringent environmental Class I standard. Mechanistic analysis indicated that HAP played a crucial role in Pb stabilization, exhibiting a high rate of 0.0176 d-1, while Cr and Ni stabilization primarily occurred through the formation of hydroxide precipitates, as well as the slowly elevated pH (>8.5). Importantly, the proposed strategy poses a minimal environmental risk to benthic organisms exhibits almost negligible toxicity towards Vibrio fischeri and the Chironomus riparius, and saves about 71 % of costs compared to kaolinite. These advantages suggest the feasibility of HAP/CaO2 dosing strategies in multi-metal stabilization in contaminated sediments.

Multi-level Reactive Oxygen Species Amplifier to Enhance Photo-/Chemo-Dynamic/Ca2+ Overload Synergistic Therapy.

Reactive oxygen species (ROS)-involved photodynamic therapy (PDT) and chemodynamic therapy (CDT) hold great promise for tumor treatment. However, hypoxia, insufficient H2O2, and overexpressed glutathione (GSH) in the tumor microenvironment (TME) hinder ROS generation significantly. Herein, we reported CaO2@Cu-TCPP/CUR with O2/H2O2/Ca2+ self-supply and GSH depletion for enhanced PDT/CDT and Ca2+ overload synergistic therapy. CaO2 nanospheres were first prepared and used as templates for guiding the coordination between the carboxyl of tetra-(4-carboxyphenyl)porphine (TCPP) and Cu2+ ions as hollow CaO2@Cu-TCPP, which facilitated GSH-activated TCPP-based PDT and Cu+-mediated CDT. The hollow structure was then loaded with curcumin (CUR) to form CaO2@Cu-TCPP/CUR composites. Cu-TCPP prevented degradation of CaO2, while Cu2+ ions reacted with GSH to deplete GSH, produce Cu+ ions, and release TCPP, CaO2, and CUR. CaO2 reacted with H2O to generate O2, H2O2, and Ca2+ to achieve O2/H2O2/Ca2+ self-supply for TCPP-based PDT, Cu+-mediated CDT, and CUR-enhanced Ca2+ overload therapy. Thus, this multilevel ROS amplifier enhances synergistic therapy with fewer side effects and drug resistance.

Drying characteristics of sewage sludge pre-conditioned by CaO and sawdust under low-temperature drying conditions.

Heat pump drying is a low-carbon method of sludge drying. The operating temperature of a heat pump is generally not more than 70℃. To improve the drying efficiency of heat pump dryers, the effects of air parameters and additives on sludge drying characteristics at low temperatures were studied. The sludge drying experiments were conducted at an air temperature 50-70℃ and an air velocity of 0.5-1.7 m/s. The experimental results showed that the increase of air temperature, velocity and the addition ratio of additives can accelerate the sludge drying process. The average and maximum drying rates of sludge pre-conditioned by CaO and sawdust increased by 14.23% and 25.71%, respectively, compared with those of pure sludge. The two-way analysis of variance (ANOVA) revealed that the influence of air temperature on the sludge drying was higher than that of air velocity. Five reference models were fitted by the drying experiment data. The Page model has the highest R2, so it is the most suitable model to predict the drying time of sludge at low temperatures.

The Degradation of Aqueous Oxytetracycline by an O3/CaO2 System in the Presence of HCO3-: Performance, Mechanism, Degradation Pathways, and Toxicity Evaluation.

This research constructed a novel O3/CaO2/HCO3- system to degrade antibiotic oxytetracycline (OTC) in water. The results indicated that CaO2 and HCO3- addition could promote OTC degradation in an O3 system. There is an optimal dosage of CaO2 (0.05 g/L) and HCO3- (2.25 mmol/L) that promotes OTC degradation. After 30 min of treatment, approximately 91.5% of the OTC molecules were eliminated in the O3/CaO2/HCO3- system. A higher O3 concentration, alkaline condition, and lower OTC concentration were conducive to OTC decomposition. Active substances including ·OH, 1O2, ·O2-, and ·HCO3- play certain roles in OTC degradation. The production of ·OH followed the order: O3/CaO2/HCO3- > O3/CaO2 > O3. Compared to the sole O3 system, TOC and COD were easier to remove in the O3/CaO2/HCO3- system. Based on DFT and LC-MS, active species dominant in the degradation pathways of OTC were proposed. Then, an evaluation of the toxic changes in intermediates during OTC degradation was carried out. The feasibility of O3/CaO2/HCO3- for the treatment of other substances, such as bisphenol A, tetracycline, and actual wastewater, was investigated. Finally, the energy efficiency of the O3/CaO2/HCO3- system was calculated and compared with other mainstream processes of OTC degradation. The O3/CaO2/HCO3- system may be considered as an efficient and economical approach for antibiotic destruction.

Synthesis of spherical CaO pellets incorporated with Mg, Y, and Ce inert carriers for CO2 capture.

Sintering and elutriation are two main problems of the calcium looping process for high-temperature CO2 capture. In the process of CO2 capture, the operation temperature is generally higher than the Taman temperature, resulting in the agglomeration and sintering of the sorbents. The traditional sorbent powers need to be granulated for practical application in a circulating fluidized bed to avoid elutriation. By using a new agar-assisted technology to granulate CaO powder incorporated with Mg, Y, and Ce inert supports, the problems of sintering and elutriation can be mitigated within one step. The incorporated inert supports are uniformly dispersed in the CaO/CaCO3 particles as an inert scaffold, and the inert scaffold is used as a skeleton to resist sintering, alleviate its agglomeration phenomenon, and keep the specific surface area to a certain extent. The Ce-incorporated CaO pellets have been proven to exhibit the best carbonation conversion and sorption capacity. The sorption capacity of 10% CeO2-incorporated CaO pellets reached 0.574 g CO2/g sorbent, more than 43% higher than that of the pure CaO pellets. In addition, the effects of the solid-liquid ratio during the preparation stage on CO2 performance were also investigated, demonstrating that a solid-liquid ratio of 1:5 was the optimal ratio to produce satisfying sorbents. The mitigated sintering and achieved spherical CaO pellets greatly promote the practical application of the calcium looping process for CO2 capture.

Ammonia removal and simultaneous immobilization of manganese and magnesium from electrolytic manganese residue by a low-temperature CaO roasting process.

A large amount of open-dumped electrolytic manganese residue (EMR) has posed a severe threat to the ecosystem and public health due to the leaching of ammonia (NH4+) and manganese (Mn). In this study, CaO addition coupled with low-temperature roasting was applied for the treatment of EMR. The effects of roasting temperature, roasting time, CaO-EMR mass ratio and solid-liquid ratio were investigated. The most cost-effective and practically viable condition was explored through response surface methodology. At a CaO: EMR ratio of 1:16.7, after roasting at 187 °C for 60 min, the leaching concentrations of NH4+ and Mn dropped to 10.18 mg/L and 1.05 mg/L, respectively, below their discharge standards. In addition, the magnesium hazard (MH) of EMR, which was often neglected, was studied. After treatment, the MH of the EMR leachate was reduced from 60 to 37. Mechanism analysis reveals that roasting can promote NH4+ to escape as NH3 and convert dihydrate gypsum to hemihydrate gypsum. Mn2+ and Mg2+ were mainly solidified as MnO2 and Mg(OH)2, respectively. This study proposes an efficient and low-cost approach for the treatment of EMR and provides valuable information for its practical application.

Study on Fu-Fang-Jin-Qian-Cao Inhibiting Autophagy in Calcium Oxalate-induced Renal Injury by UHPLC/Q-TOF-MS-based Metabonomics and Network Pharmacology Approaches.

INTRODUCTION: Fu-Fang-Jin-Qian-Cao is a Chinese herbal preparation used to treat urinary calculi. Fu-Fang-Jin-Qian-Cao can protect renal tubular epithelial cells from calcium oxalateinduced renal injury by inhibiting ROS-mediated autopathy. The mechanism still needs further exploration. Metabonomics is a new subject; the combination of metabolomics and network pharmacology can find pathways for drugs to act on targets more efficiently. METHODS: Comprehensive metabolomics and network pharmacology to study the mechanism of Fu-Fang-Jin-Qian-Cao inhibiting autophagy in calcium oxalate-induced renal injury. Based on UHPLC-Q-TOF-MS, combined with biochemical analysis, a mice model of Calcium oxalateinduced renal injury was established to study the therapeutic effect of Fu-Fang-Jin-Qian-Cao. Based on the network pharmacology, the target signaling pathway and the protective effect of Fu- Fang-Jin-Qian-Cao on Calcium oxalate-induced renal injury by inhibiting autophagy were explored. Autophagy-related proteins LC3-II, BECN1, ATG5, and ATG7 were studied by immunohistochemistry. RESULTS: Combining network pharmacology and metabolomics, 50 differential metabolites and 2482 targets related to these metabolites were found. Subsequently, the targets enriched in PI3KAkt, MAPK and Ras signaling pathways. LC3-II, BECN1, ATG5 and ATG7 were up-regulated in Calcium oxalate-induced renal injury. All of them could be reversed after the Fu-Fang-Jin-Qian- Cao treatment. CONCLUSIONS: Fu-Fang-Jin-Qian-Cao can reverse ROS-induced activation of the MAPK signaling pathway and inhibition of the PI3K-Akt signaling pathway, thereby reducing autophagy damage of renal tubular epithelial cells in Calcium oxalate-induced renal injury.