Photoluminescence Confocal Mapping of a Novel Nd3+/Yb3+: Zn2SiO4 Composite thin film on Si (100) Substrate Utilizing a 980 nm Pumping Source.

A fixed Nd3+ and varied Yb3+ ion concentration were incorporated in a Zinc-Silicate (SZNYX) composite solution using ex-situ sol-gel solution to fabricate a novel thin film (TF) on Si (100)-substrate. The upconversion luminescence (UCL) spectra of the thin films were measured under 980 nm laser excitation, with the most optimized result for Yb3+ ion concentration of 1.5 mol%. Additionally, a 2-D photoluminescence (PL) confocal mapping of the SZNY15-TF material confirmed uniform PL distribution throughout the space under the same excitation wavelength. Structural characterization via XRD revealed the tetragonal Zn2SiO4 nano-crystalline nature of the film at three distinct annealing temperatures. Morphological characterization using the Field-emission scanning electron Microscope (FESEM) coupled with energy dispersion spectrometer (EDS) affirmed the nanoflower structure and the purity of doping purity in the samples, respectively. These findings collectively confirm the promising UCL properties of the SZNYX-TF samples, suggesting potential applications in photonic.

[Effect of different initial processing treatments on commercial characters and chemical components of Fritillaria taipaiensis].

To investigate the effects of different initial processing methods on the quality of Fritillaria taipaiensis, this study explored the effects of anti-browning treatment, drying methods, and drying temperatures on the commercial characters, chromaticity values, and alkaloid and nucleoside components of Fritillariae Taipaiensis Bulbus. The results were comprehensively evaluated through correlation analysis(CA), principal component analysis(PCA), and hierarchical clustering analysis(HCA). Compared with those of the direct drying group(WD60), the chromaticity values(ΔE*) of the groups with scraped outer skin( FHB1) and mixed lime powder treatments(FHB2) were significantly reduced, indicating the inhibition of the browning process. The total alkaloid content of the group with mixed raw soil treatment(FHB3) and the FHB2 group showed no significant change, whereas that of the group with 5%Na Cl O solution rinse treatment(FHB4) was the lowest. Compared with air-blast dried(WD50) samples, the ΔE* values of freezedried(FS6) and vacuum-dried(FS5) samples were significantly decreased, with an increase in total alkaloid contents. Conversely,the ΔE* values of shade-dried(FS1) and sun-dried(FS2) samples were significantly increased, with severe browning and low total alkaloid contents. The total alkaloid contents of heat-pump-dried(FS4) samples showed no significant change, and their ΔE* value was significantly decreased, with a light degree of browning and favorable commercial characters. The total alkaloid content of air-blast dried samples initially increased and then decreased within the range of 40-80 ℃, and the highest content was recorded at 70 ℃. The ΔE* values of high-temperature air-blast dried samples(70-80 ℃) were smaller with a light degree of browning, whereas their texture was compact and lacked powder. CA revealed a significant relationship between the uracil content and chromaticity value of the samples(P< 0. 05). The clustering relationships among samples subjected to different treatments were visualized via PCA and HCA. The results showed that FHB2 and air-blast drying(50-60 ℃) were more suitable for large-scale production, and heat pump drying could be a promising direction for future development. This study provides a scientific basis for optimizing the initial processing methods of Fritillaria taipaiensis.

Analyzing the effect of blue-blocking lenses on color vision tests using the chromaticity coordinate method.

Significance: Blue light with wavelengths of 380-445 nm can harm the retina, leading to the development of blue-blocking lenses (BBLs). Understanding whether BBLs affect color vision test outcomes and color discrimination ability is crucial for people in color-associated jobs. Aim: This study aimed to evaluate the effect of BBLs on color vision tests and analyze color discrimination using mathematical models of color spaces. Approach: Six pseudoisochromatic (PIC) tests and two Farnsworth-Munsell (FM) tests were conducted to assess participants' color vision. Friedman signed rank test was used to compare the outcomes of the Farnsworth-Munsell 100-Hue Tests (FM 100-Hue Tests) between the BBLs and ordinary lenses groups. The CIE color difference formula and a spectral illuminometer were employed to evaluate the color differences with and without BBLs. Results: All subjects showed normal outcomes in all PIC tests and Farnsworth-Munsell Dichotomous D-15 Tests (FM D-15 Tests). There were no significant differences between ordinary lenses group and BBLs groups in FM 100-Hue Tests. In the color space, the effect of BBLs on each color light was equivalent to a translation on the CIE 1931 chromaticity diagram with minor distortion. Since BBLs do not disrupt the continuity of the chromaticity diagram, or cause different colors to appear the same, they do not lead to color confusion. However, colors with short wavelengths exhibited more changes in color difference when wearing BBLs. Conclusions: BBLs do not impair the wearer's ability to discriminate colors or perform color vision tests accurately. However, BBLs can cause color differences especially in the recognition of blue hues.

Biomimetic Optical-Filter Sensor System for Discrimination of Infrared Chemical Signatures Against a Cold Sky Background.

Passive infrared (IR) systems enable rapid detection of chemical vapors but are limited by size, weight, cost, and power. Previously, the authors reported a novel passive sensor that utilizes multiple IR filter/detector combinations to discriminate between different chemical vapors based on their unique IR absorption spectra in the same manner the human eye uses to generate colors. This approach enables a very small, compact, and low-power sensor system with the capability to discriminate between chemical vapors of interest and background chemicals. All previous work showed the capability of this sensor system in discriminating chemical vapors against a hot blackbody in a laboratory environment. Now the authors demonstrate the ability of this sensor system to discriminate between the chemical vapor agent simulant dimethyl methylphosphonate and ethanol against the cold sky in an outdoor environment.

Synthesis and evaluation of fluorescent resins with europium-ß-diketonate complex for orthodontic use.

No effective technique exists for removing adhesive remnants following bracket debonding. We propose that fluorescence imaging using europium ions (Eu3+) offers an effective solution for minimizing iatrogenic enamel damage. This study aimed to assess the impact of different mixing ratios of monomer mixtures on the photoluminescence and flexural properties of a newly developed fluorescent adhesive. Four monomer blends with varying urethane dimethacrylate (UDMA) to triethylene glycol dimethacrylate (TEGDMA) ratios were prepared and polymerized. The blends contained 0.1 wt% of tris(1,3-diphenyl-1,3-propanedionato)(1,10-phenanthroline) Eu(III), [Eu(DBM)3Phen], as the phosphor. Optical measurements and flexural tests were conducted for each resin specimen. The emission spectra exhibited narrow bands corresponding to the 4f-4f transitions of the Eu3+ ions. The photoluminescence properties remained unaffected by the mixing ratio, whereas the mechanical properties tended to improve with higher UDMA content. We conclude that the Eu(DBM)3Phen-containing resin shows promise as a fluorescent orthodontic adhesive that contributes to preserving enamel health.

Novel Tb³âº-Doped LaAl2B4O10 phosphors: Structural analysis, luminescent properties, and energy transfer mechanism.

This study explores the structural and luminescent properties of terbium (Tb³âº)-doped lanthanum aluminium borate (LaAl2B4O10, abbreviated as LAB) phosphors, a novel host lattice for Tb³âº doping. LAB:Tb³âº phosphors, with varying dopant concentrations, were synthesized using a microwave-assisted combustion synthesis approach and characterized using X-ray diffraction (XRD), Rietveld refinement, and photoluminescence spectroscopy at both room and low temperatures. The structural analysis confirmed the hexagonal crystal structure of LAB and revealed successful incorporation of Tb³âº ions without altering the fundamental lattice. Luminescence studies demonstrated that the LAB:Tb³âº phosphors show strong green emission primarily attributed to the 5D4→7F5 transition of Tb³âº. The optimal doping concentration was determined to be 5 wt% Tb³âº, which provided maximum luminescence efficiency. This concentration also allowed for a critical study of energy transfer mechanisms within the phosphor, revealing dipole-dipole interactions with a critical distance of 9.80 Å between Tb³âº ions. Additionally, the CIE chromaticity coordinates of LAB:0.05 Tb³âº were precisely determined to be (0.289, 0.4460), indicating the potential for high-quality green emission suitable for solid-state lighting and display technologies. This work not only demonstrates the potential of LAB:Tb3+ as a highly efficient green luminescent material, but also sheds light on the mechanisms responsible for energy transfer and concentration quenching.

[Changes in fingerprint and chromaticity values of Mori Cortex during stir-frying process].

This study aims to reveal the dynamics of the HPLC fingerprint, chromaticity values, and main chemical components of Mori Cortex during the stir-frying process. The fingerprints of raw and processed products of Mori Cortex were established. The content of mulberroside A, oxyresveratrol, kuwanon G, and kuwanon H in the samples and the chromaticity values of the samples were determined. Furthermore, the similarity evaluation of fingerprints and the correlation analysis between fingerprints and chromaticity values were carried out. The results showed that the fingerprints of raw and processed products of Mori Cortex had high similarity, and the overall changes in the content of the main chemical components in the stir-frying process were similar. According to the experience, when the stir-frying is moderate, the total chromaticity value difference |ΔE~*_(ab)| is above 1.5. With the extension of stir-frying time, the L~* and E~*_(ab) values keep decreasing, and the a~* value keeps increasing. The results of the correlation analysis between fingerprints and chromaticity values showed that peaks 1(5-hydroxy maltol), 2(mulberroside A), 3, 4, 6, 7, 11(oxyresveratrol), 14, 17(kuwanon G), and 18(kuwanon H) had significant correlations with the chromaticity values. Quantitative analysis of the four components with higher content showed that the content of the four components decreased to varying degrees when the stir-frying was excessive. In addition, 5-hydroxy maltol was produced after stir-frying of Mori Cortex, and the fingerprint and chromaticity values showed regular changes during the stir-frying process. The chromaticity can be included in the evaluation of the stir-frying process of Mori Cortex, which provides a reference for standardizing the quality of stir-fried Mori Cortex.

Synthesis, Spectral Characterization and Photoluminescence of 3-chloro-6-methoxy-2-(methylsulfanyl)quinoxaline in Different Solvents: An Experimental and Theoretical Investigation Using DFT.

In the present work, we synthesized 3-chloro-6-methoxy-2-(methyl sulfanyl) quinoxaline (3MSQ) using a microwave-assisted synthesis method. The physicochemical structural analysis of the synthesized compound utilizing 1H-NMR, 13C-NMR, and FT-IR spectroscopy techniques. The photophysical properties of 3MSQ was examined through absorption and fluorescence spectroscopy. Spectroscopic analyses revealed a bathochromic shift in both absorption and fluorescence spectra, attributed to the π → π* transition. Ground and excited state dipole moments was experimentally determined using the solvatochromic shift method, employing various correlations such as Lippert's, Bakhshiev's, Kawski-Chamma-Viallet's equations, and solvent polarity parameters. Our findings indicate that the excited state dipole moments exceed those of the ground state, suggesting increased polarity in the excited state. Further, the while detailed bond length, bond angles, dihedral angles, Mulliken charge distribution, ground state dipole moments and HOMO-LUMO energy gap estimated through ab initio computations using Gaussian-09W. The value of energy band gap obtained from both the methods are in good agreement. Furthermore, employing DFT computational analysis, we identified reactive centers such as electrophilic and nucleophilic sites using molecular electrostatic potential (MESP) 3D plots. Additionally, CIE chromaticity analysis was performed to understand the photoluminescent properties of 3MSQ. The insights derived from these analyses contribute to a better understanding of the molecule's electronic structure, photophysical properties, and solute-solvent interactions, thus providing valuable information regarding its behaviour and characteristics under diverse conditions. These results contribute to a comprehensive understanding of the molecular structure and properties of 3-chloro-6-methoxy-2-(methyl sulfanyl) quinoxaline (3MSQ).

Stereo-Structural Fine Tuning of Chromaticity.

Lanthanoid carboxylates were synthesized and in situ self-assembled to illustrate temperature-driven evolution in chromaticity. Evolution in structure (crystallinity), composition, luminosity, and chromaticity were investigated revealing the coupled role of divergence in order/structure (spatial organization), and composition in tuning observed color. Loss of crystallinity or increase in residual carbon leads to decrease in luminosity even with increase in hue. Comparing Ho and Er congeners shows that the density of accessible transition states relates to shifts in low and high wavelength components of color. This work demonstrates that, just as interface dipoles can lead to change in semiconductor band gap, structure and composition can analogously alter observed color.

Investigations on anticancer activity of Eu3+ doped hydroxyapatite nanocomposites against MCF7 and 4T1 breast cancer cell lines: A structural and luminescence Perspective.

Breast cancer remains a significant global health concern, necessitating the development of novel therapeutic approaches. In this study, we investigate the role of Eu3+ doped hydroxyapatite nanocomposites (Han: Eu3+) in the treatment of MCF7 and 4T1 breast cancer cell lines. Furthermore, we explored the structural and luminescent properties of these nanocomposites. Han: Eu3+ were synthesized using a modified co-precipitation method, and their morphology and crystal structure were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD) in which the average crystalline size of Han: Eu3+ was found to be 25 nm, rendering them suitable for cellular uptake and targeted therapy. To gain insights into the luminescent properties of Han: Eu3+, their excitation and emission spectra were recorded using photoluminescence spectrometer. The characteristic red emission of Eu3+ ions was observed upon excitation, validating the successful doping of Eu3+ into the Han lattice, which was confirmed by the CIE chromaticity coordinate study. These luminescent properties of Han: Eu3+ hold promise for potential applications in bioimaging. To evaluate the efficacy of Han: Eu3+ in breast cancer treatment, MCF7 and 4T1 cell lines were exposed to varying concentrations of the nanocomposites. Cell viability assays revealed a concentration-dependent reduction in cell viability, indicating the potential anticancer activity of Han: Eu3+. The findings of this study contribute to the expanding field of nanomedicine, bringing targeted breast cancer treatments and us closer to more effective.

The effect of speed sintering on the optical properties and microstructure of multi-layered cubic zirconia.

PURPOSE: Speed sintering was introduced to fabricate time-efficient chairside restorations, however, its influence on the microstructure and optical properties of zirconia is still unclear. This study investigated the influence of speed sintering on the microstructure and optical properties of ultra-translucent multi-layered cubic zirconia. MATERIALS AND METHODS: Ultra-translucent cubic zirconia (Katana™ UTML; Kuraray Noritake Dental Inc., Aichi, Japan) was cut into a total of 80 specimens, twenty within each layer of the blank. The specimens were divided into 2 groups: speed and conventional sintering. The translucency parameter, opalescence, chromaticity, and color difference were recorded using a spectrophotometer. Scanning electron microscope images were used for crystallographic analysis. One-way ANOVA and Tukey's post-hoc test (p < 0.05) were used for data analysis. RESULTS: Speed sintering significantly reduced the translucency and opalescence compared to conventional sintering excluding the opalescence of the dentin layer. Chromaticity significantly decreased with speed sintering in less chromatic layers and significantly increased in more chromatic layers. Mean color change ranged between 0.65 and 1.25 across different layers. Mean crystal size decreased with speed sintering. CONCLUSIONS: With speed sintering, translucency, and opalescence decrease while chromaticity increases in the more chromatic layers. Additionally, no clinically perceptible color change was found compared to conventional sintering.

Quality difference analysis of raw and vinegar-processed products of Qingpi based on color and component correlation.

The dried young fruit of Citrus reticulata Blanco, known as Qingpi, is commonly used in clinic both with its raw and vinegar-processed products. However, the distinctions in quality between these two products remain unclear, and the methods for identification are considerably intricate. In this study, an electronic eye technique was applied to assess the overall color of Qingpi products before and after processing. The luminosity (L*) and yellow-blue (b*) values of Qingpi decreased after vinegar processing, while red-green (a*) values increased. The discriminant function models based on color parameters were established to effectively classify the two products. The chemical compositions of different Qingpi products were characterized using ultra-high performance liquid chromatography fingerprint technology, and 10 distinct components were considered as potential chemical markers. The correlation analysis revealed a significant relationship between chromatic values and chemical components. In conclusion, the results of this study suggested that chromaticity can be effectively considered as a valuable instrument for the prediction of component content in both raw and vinegar-processed Qingpi products. This study will provide new ideas and methods for identification and quality evaluation of Qingpi processed products, as well as provide a reference for standardizing traditional Chinese medicine processing techniques.

Fluorescence Study of Pr3+ Doped CdS Nanoparticles and its Applications in Sensors and Detectors.

Fluorescence spectra of Pr3+ doped CdS nanoparticles, synthesized by chemical precipitation method, have been recorded at room temperature. The synthesized particles are nearly spherical shaped and the grain size is decreased with the increase in Pr3+ concentration. The chemical identity of the nanoparticles was confirmed by EDAX spectrum, the absorption peaks was confirmed by FTIR spectrum and then the recorded values were compared with the CIE diagram. The oscillator strengths of the 4f ↔ 4I transitions are parameterized in terms of three phenomenological Judd-Ofelt intensity parameters Ωλ (λ = 2, 4 and 6). Using the fluorescence data and these Ωλ parameters, theoretical and experimental study of various radiative properties viz., spontaneous emission probability (A), radiative life time , fluorescence branching ratio and stimulated emission cross-section were evaluated. The values of these parameters indicate that 3P0→ 3H4 transition can be considered to be good laser transition in the visible colour region. Also, excitation with 493 nm, leads to similar blue regions. The synthesized Pr3+ doped CdS nanomaterials could be useful for sensing and detecting devices, particularly for temperature sensing measurement and bio-sensing detection.

Research on Clinical Characteristics of Metaplastic Chronic Atrophic Gastritis Patients from Complexion Diagnosis Based on Gender Difference / 世界科学技术-中医药现代化

Objective Based on gender differences,this paper discusses the characteristics of facial color diagnosis in male and female patients with metaplastic chronic atrophic gastritis(CAG),and explores the pathological mechanism of different gender patients from the perspective of TCM pathogenesis,so as to provide personalized reference for TCM prevention and treatment of metaplastic CAG.Methods In this study,the complexion information of patients with chronic non atrophic gastritis(CNG)and CAG was collected by MT-BX-01 four-diagnostic instrument.The color colorimetric characteristics of male and female metaplastic CAG patients and CNG patients were analyzed by case-control study.Results In female patients,the L value and a value of liver region in CAG with mild intestinal metaplasia(IM)group,moderate and severe IM were significantly lower than those in CNG group(P<0.05).In male patients,the L value of spleen region in CAG with moderate and severe IM group was significantly higher than that in CNG group(P<0.05).Conclusion There is a certain gender difference in the facial color characteristics of patients with metaplastic CAG.The facial chromaticity value of female patients with metaplastic CAG changes most significantly in the liver area,while that of male patients mainly in the spleen area.It is suggested that the incidence of female metaplastic CAG is mostly related to liver,while that of male is mostly related to spleen,which provides a personalized method for clinical diagnosis and treatment of metaplastic CAG based on gender differences.

Effect of dissolved ozone flotation thickening process on coliform bacteria and antibiotics simultaneous abatement: A pilot-scale study.

This study focused on the removal of the total coliforms, fecal coliforms and four target antibiotics in the dissolved ozone flotation (DOF) thickening sludge process. Additionally, the thickened effluent chromaticity and its effect on thickened sludge hydrolysis process were investigated. Ozonation in the DOF process could inactivate coliforms by oxidizing cellular components and destroying genetic material, as well as altering the chemical structure of antibiotics, leading to the degradation of antibiotics. At an O3 dosage of 16 mg/g TS, the concentration of total coliforms and fecal coliforms decreased by 2.2 log and 2.4 log, corresponding to an overall removal rate of 99.4 % and 99.7 %, respectively. The total degradation rate of four target antibiotics (tetracycline (TC), oxytetracycline (OTC), norfloxacin (NOR), ofloxacin (OFL)) were 66.5 %, 68.8 %, 53.3 % and 57.5 %, respectively. The chromaticity removal rate of the thickened effluent reached 95 %. Analysis of fluorescence spectra indicated alterations in the fluorescence properties of dissolved organic matter, resulting in a decrease in fluorescence intensity by ozonation. The thickened sludge had higher hydrolysis rates, resulting in a greater production of volatile fatty acids (VFAs). This was mainly attributed to the increased amount of soluble protein and carbohydrate in the substrate after DOF treatment, which was more conducive for the rapid conversion of hydrolysis into VFAs during the initial stage. These results provided new ideas for upgrading and transforming the thickening process of wastewater treatment plants (WWTPs).

Structural, optical, and thermoluminescence characterizations of 1 mol% Dy3+ion-activated Fluro Boro-phosphate glass for photonic devices.

A novel Fluro boro-phosphate host matrix doped with the 1 mol% of Dy3+ ions (50B2O3 + 20P2O5 + 10TiO2 + 10SrCO3 + 4BaF2 + 5BaCO3 + 1Dy2O3) was prepared using a conventional melt-quenching mechanism, and its structural characteristics were explored through the Powder-XRD, FT-IR, FT-Raman, EDAX and SEM spectroscopic analysis. The XRD spectrum of the glass confirmed its non-crystalline or amorphous structure. FT-IR and FT-Raman spectrum studies revealed that various borate and phosphate groups present with a variety of stretching and bending vibrations. Scanning Electron Microscope (SEM) and Energy Dispersive X-ray analysis (EDAX) analysis have been used to examine the surface morphology and the presence of elements, respectively in the prepared glass. The optical absorption spectrum was used to explore the electronic band structure through the measurements of optical band-gap energy and Urbach energy. The luminescence spectrum reveals the emission characteristics of Dy3+ ions due to the electric-dipole and magnetic-dipole transitions. It is found that the decay time of the 4F9/2 excited level at a concentration of 1 mol% Dy3+ in the glass matrix is tri-fit non-exponential. The CIE chromaticity coordinates and the concentration influence on Y/B intensity ratios were computed for the creation of white light from the luminescence spectrum. The present work also discusses the findings after figuring out the correlated color temperature associated (CCT) with the color purity (Pe). The Thermoluminescence (TL) characteristics and the kinetic parameters of the glass were studied after the γ-irradiation with a dose of 2 kGy. EPR investigation revealed the paramagnetic characteristics through the hyperfine structure of Dy3+ ions and the electron-hole pair formation upon irradiation in the glass matrix.

Various Color Light Emission from Single, Double, and Triple Eu3+/Tb3+/Tm3+ Doped Borate Glass Excited by UV Light.

Lithium-aluminum-borate glasses doped with single, double, or triple Tm3+, Tb3+, or Eu3+ ions, respectively, at several concentrations were prepared. Structural characterization was performed using optical absorption and luminescence spectroscopy. The transition for the rare earth ions under study was observed in optical absorption and some for-host glass at wavelengths less than 300 nm. The luminescence of Eu3+, Tb3+, and Tm3+ is presented as bright red, green, and blue emissions, respectively. White light was produced by adjusting the excitation wavelength and doping concentration of Tm2O3, Eu2O3, and Tb4O7. The sample doped with triple rare earth ions produced color emissions from Tb and Tm to Eu, which varied in hue based on the excitation wavelengths of 350, 360, and 370 nm. The glass samples under investigation may be promising for optoelectronic devices and security applications such as data encryption.

Analysis of Structural, Photoluminescence, and Colorimetric Performance of Gd-Incorporated BNT Ceramic.

Structural, optical, photoluminescence and colorimetric analyses of Gd (1-5 mol %) doped BNT ceramics synthesized by the solid-state reaction technique are reported. Structural analyses of all the samples are done by the X-ray diffraction method. It is shown that the samples have rhombohedral crystal structures with an R3C space group. The energy band gap of all the phosphors is computed from the UV-visible absorbance spectra. Photoluminescence behaviors are analyzed from the excitation along with the emission spectra of the prepared materials. The critical quenching concentration with the critical energy transfer distance is observed owing to the dipole-dipole interactions between the materials. Colorimetric analyses are carried out with the help of CIE chromaticity. Moreover, the color purity, correlated color temperature, color rendering index, and luminous efficiency of radiation values are evaluated by using the chromaticity coordinates.

Rapid evaluation of Ziziphi Spinosae Semen and its adulterants based on the combination of FT-NIR and multivariate algorithms.

Ziziphi Spinosae Semen (ZSS) is a valued seed renowned for its sedative and sleep-enhancing properties. However, the price increase has been accompanied by adulteration. In this study, chromaticity analysis and Fourier transform near-infrared (FT-NIR) combined with multivariate algorithms were employed to identify the adulteration and quantitatively predict the adulteration ratio. The findings suggested that the utilization of chromaticity extractor was insufficient for identification of adulteration ratio. The raw spectrum of ZMS and HAS adulterants extracted by FT-NIR was processed by SNV + CARS and 1d + SG + ICO respectively, the average accuracy of machine learning classification model was improved from 77.06 % to 97.58 %. Furthermore, the R2 values of the calibration and prediction set of the two quantitative prediction regression models of adulteration ratio are greater than 0.99, demonstrating excellent linearity and predictive accuracy. Overall, this study demonstrated that FT-NIR combined with multivariate algorithms provided a significant approach to addressing the growing issue of ZSS adulteration.

[Discrimination of different processing degrees and quantitative study of processing end point of vinegar-processing Cyperi Rhizoma pieces based on electronic sensory technology].

In this study, CM-5 spectrophotometer and Heracles NEO ultra-fast gas-phase electronic nose were used to analyze the changes in color and odor of vinegar-processed Cyperi Rhizoma(VPCR) pieces. Various analysis methods such as DFA and partial least squares discriminant analysis(PLS-DA) were combined to identify different processing degrees and quantify the end point of processing. The results showed that with the increase in vinegar processing, the brightness parameter L~* of VPCR pieces decreased gradua-lly, while the red-green value a~* and yellow-blue value b~* initially increased and reached their maximum at 8 min of processing, followed by a gradual decrease. A discriminant model based on the color parameters L~*, a~*, and b~* was established(with a discrimination accuracy of 98.5%), which effectively differentiated different degrees of VPCR pieces. Using the electronic nose, 26 odor components were identified from VPCR samples at different degrees of vinegar processing. DFA and PLS-DA models were established for different degrees of VPCR pieces. The results showed that the 8-min processed samples were significantly distinct from other samples. Based on variable importance in projection(VIP) value greater than 1, 10 odor components, including 3-methylfuran, 2-methylbuty-raldehyde, 2-methylpropionic acid, furfural, and α-pinene, were selected as odor markers for differentiating the degrees of vinegar processing in VPCR. By combining the changes in color and the characteristic odor components, the optimal processing time for VPCR was determined to be 8 min. This study provided a scientific basis for the standardization of vinegar processing techniques for VPCR and the improvement of its quality standards and also offered new methods and ideas for the rapid identification and quality control of the end point of processing for other traditional Chinese medicine.