Accessories in clear aligner therapy: Laypeople's expectations for comfort and satisfaction.

Background: This study explored the layperson's perception of comfort, satisfaction, and willingness to use various accessories in clear aligner therapy. Methods: A total of 267 people analyzed standardized intraoral photographs of a female model in orthodontic treatment using: 1) only clear aligner (CA), the control group; 2) clear aligner+attachments (AT); 3) clear aligners+Cl II elastics (EL); 4) clear aligner+hybrid treatment with esthetic braces (HEB); 5) Clear aligner+hybrid treatment with metallic braces (HMB); 6) clear aligner+mini-implants (MI); 7) clear aligner+mini-implants and elastics for intrusion (MIE). In addition, a social media questionnaire was distributed to assess the willingness to undergo orthodontic treatment with various accessories. Results: There was a significant difference between CA and all the other groups (P<0.001), with CA being considered more comfortable and providing greater satisfaction compared to other accessories. Moreover, AT showed a significant difference in reducing treatment time compared to other groups. Conclusion: The CA was the most comfortable, exhibiting a higher satisfaction rate and a greater willingness to use it. The AT therapy was perceived as more comfortable and was associated with higher satisfaction and a greater likelihood of use, especially if it resulted in reduced treatment time. On the other hand, the participants reported that the HMB, MI, and MIE accessories were less comfortable.

Enhancing biofilm resistance and preserving optical translucency of 3D printed clear aligners through carboxybetaine-copolymer surface treatment.

OBJECTIVES: This study aimed to use a carboxybetaine methacrylate (CBMA) copolymer solution to surface treat 3D printed clear aligners at different fabrication stages, to impart antifouling properties, and assess the surface treatment at various fabrication stages' impact on physico-mechanical characteristics. METHODS: Surface treatments using a blend of 2-hydroxyethyl methacrylate (HEMA) and CBMA, termed CCS, were performed at various stages of 3D printed clear aligner fabrication. Experimental groups, CB1, CB2, and CB3, were determined by the stage of surface treatment during post-processing. CB1, CB2, and CB3 received treatment before post-curing, after post-curing, and after post-processing, respectively. Untreated samples served as controls. Physical and mechanical properties were assessed through tensile testing, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and UV-Vis spectroscopy. The surface was further characterized through scanning electron microscopy and contact angle measurements. The cytotoxicity was assessed with 7-day elution and agar diffusion assays. Lastly, bacterial biofilm resistance was evaluated using confocal laser scanning microscopy. Crystal violet assay was performed using Streptococcus mutans. RESULTS: Surface treatment during CB1 stage exerted the most significantly unfavorable influence on properties of the 3D printed aligner resin. CB2 samples showed the maximum preservation of translucency even after 7-day aging. CB2 and CB3 phases showed enhanced hydrophilicity of sample surfaces with reduced adhesion of multispecies biofilm and S. mutans. SIGNIFICANCE: Application of CCS surface treatment immediately after post-curing (CB2) can enhance the biofilm resistance of 3D printed clear aligners while maintaining high fidelity to optical translucency and constituent mechanical properties.

Effectiveness of Clear Aligners on Sequential Maxillary Molar Distalization: Discrepancy between Treatment Goal and Outcome.

Objectives: The purpose of this preliminary study was to determine the differences between planned and actual maxillary molar movements after the completion of treatment with an initial set of clear aligners including sequential maxillary molar distalization. Methods: The data records of 14 non-growing patients who completed orthodontic treatment with sequential maxillary molar distalization using clear aligners were retrospectively evaluated (n= 14, 4 males and 10 females, 33.61 ± 8.57 years). Data on planned tooth movements were obtained from ClinCheck software (ClinCheck Pro version 5.3). The amounts of actual tooth movements were obtained by performing superimposition of lateral cephalograms taken before and after treatment. The amounts of distal translation and tipping between planned and actual maxillary molar movements were compared with the paired Student's t-test. Results: The statistically significant differences between planned and actual translation movements of maxillary first and second molars were shown after completing treatment with the first series of aligners (p < 0.05). The average actual amount of molar distalization on maxillary first molars was less than the planned amount by 1.32 ± 0.42 mm. Similarly, the average actual amount of molar distalization on maxillary second molars was less than the planned amount by 1.57 ± 0.45 mm. The accuracy for molar distalization, namely, the percentage of actual distal translation to planned movement, was 40.11% for maxillary first molars and 35.39% for maxillary second molars. However, the difference between the planned and actual angulation movements was not significant (p > 0.05). Conslusions: In conclusion, the amounts of actual distal translation of maxillary molars through the utilization of clear aligners were significantly lower than planned. However, there were no statistically significant differences between the degrees of actual and planned molar angulation movement.

Shear Bond Strength of Clear Aligner Attachment Using 4-META/MMA-TBB Resin Cement on Glazed Monolithic Zirconia.

Increasing demand for adult orthodontic treatment using clear aligners has highlighted challenges in bonding clear aligner attachments to various restorations. Specifically, the bond strength of clear aligner attachments to glazed monolithic zirconia has not been extensively studied. This study aims to compare the shear bond strength (SBS) and mode of failure (MOF) of conventional bonding methods versus Superbond C&B (4-META/MMA-TBB resin cement) for clear aligner attachments on glazed monolithic zirconia. Fifty sintered and glazed zirconia samples were divided into five groups and attached with clear aligner attachments: Si (silane), B (bonding agent), SiB (bonding agent and silane), SU (Superbond C&B), and SiSU (silane and Superbond C&B). SBS and MOF of these samples were analyzed. Results indicated a significant difference in bond strength among the groups. SiSU exhibited the highest bond strength, followed by SU, while B had the lowest bond strength. SEM analysis revealed that SiSU and SU predominantly exhibited mixed failure, indicating high bond strength without affecting the glazed layers of the zirconia. In contrast, B exhibited only adhesive failure at the interface, resulting in insufficient bond strength for effective orthodontic treatment. In conclusion, using 4-META/MMA-TBB resin cement provides high bond strength for clear aligner attachments on glazed zirconia with minimal material damage during debonding.

Investigation of the Mechanical Properties of Thermoplastic Materials Influenced by Different Chemicals.

Objective: The quality of orthodontic forces in aligners is mainly influenced by their mechanical properties. At present, there is insufficient information on how environmental factors affect the mechanical function of aligners, and studies have shown that patients do not pay enough attention to removing aligners while eating and drinking. Therefore, in this study, we investigated the effect of different chemicals on the mechanical properties of thermoplastic materials. Methods: In this study, 175 thermoplastic samples from Easy-Vac gasket (3A Medes, Korea) were prepared, and their chemical composition, tensile strength, and hardness before and after exposure to solutions of orange juice, Cola, chlorhexidine mouthwash, and distilled water were measured. One-Way analysis of variance (ANOVA), Tamhane's test, and Tukey's test were used for statistical analysis. Results: The tensile strength of the sheets increased with continuous exposure to orange juice and chlorhexidine mouthwash, and their hardness decreased with continuous exposure to carbonated beverages. There was no change in the chemical composition of the samples after exposure to different chemicals. Conclusion: Although these changes are statistically significant, they do not have a significant effect on the result of aligner performance. Therefore, the only concern is the cariogenicity of orange juice and Cola during treatment with aligners and the administration of chlorhexidine mouthwash.

Evaluation of the effects of temperature and centrifugation time on elimination of uncured resin from 3D-printed dental aligners.

The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.95g) at room temperature (RT, 23 °C) and high temperature (HT, 55 °C) for 2, 4, and 6 min. The control group received no treatment (NT). Cleaning efficiency was assessed through rheological analysis, weight measurement, transparency evaluation, SEM imaging, 3D geometry evaluation, stress relaxation, and cell viability tests. Results showed increased temperature and longer centrifugation times significantly reduced aligner viscosity, weight (P < 0.05), and transmittance. IPA-cleaned aligners exhibited significantly lower transparency and rougher surfaces in SEM images. All groups met ISO biocompatibility standards in cytotoxicity tests. The NT group had higher root mean square (RMS) values, indicating greater deviation from the original design. Stress relaxation tests revealed over 95% recovery in all groups after 60 min. The findings suggest that a 2-min HT centrifugation process effectively removes uncured resin without significantly impacting the aligners' physical and optical properties, making it a clinically viable option.

Effectiveness of different intrusion modes of maxillary anterior teeth with mini-implants in clear aligner treatment: a three-dimensional finite element analysis.

BACKGROUND: The intrusion of maxillary anterior teeth is often required and there are various intrusion modes with mini-implants in clear aligner treatment. The objective of this study was to evaluate the effectiveness of maxillary anterior teeth intrusion with different intrusion modes, aiming to provide references for precise and safe intrusion movements in clinical practice. METHODS: Cone-beam computed tomography and intraoral optical scanning data of a patient were collected. Finite element models of the maxilla, maxillary dentition, periodontal ligaments (PDLs), clear aligner (CA), attachments, and mini-implants were established. Different intrusion modes of the maxillary anterior teeth were simulated by changing the mini-implant site (between central incisors, between central and lateral incisor, between lateral incisor and canine), loading site (between central incisors, on central incisor, between central and lateral incisor, between lateral incisor and canine), and loading mode (labial loading and labiolingual loading). Ten conditions were generated and intrusive forces of 100 g were applied totally. Then displacement tendency of the maxillary anterior teeth and CA, and stress of the PDLs were analyzed. RESULTS: For the central incisor under condition L14 and for the canine under conditions L11, L13, L23, and L33, the intrusion amount was negative. Under other conditions, the intrusion amount was positive. The labiolingual angulation of maxillary anterior teeth exhibited positive changes under all conditions, with greater changes under linguoincisal loading. The mesiodistal angulation of canine exhibited positive changes under labial loading, while negative changes under linguoincisal loading except for condition L14. CONCLUSIONS: The intrusion amount, labiolingual and mesiodistal angulations of the maxillary anterior teeth were affected by the mini-implant site, loading site, and loading mode. Labial and linguoincisal loading may have opposite effects on the intrusion amount of maxillary anterior teeth and the mesiodistal angulation of canine. The labiolingual angulation of the maxillary incisors would increase under all intrusion modes, with greater increases under linguoincisal loading.

Research on path planning for clear aligner flexible manufacturing.

In recent years, clear aligner can enhance individual appearance with dental defects, so it used more and more widely. However, in manufacturing process, there are still some problems, such as low degree of automation and high equipment cost. The problem of coordinate system mismatch between gingival curve point cloud and dental CAD model is faced to. The PCA-ICP registration algorithm is proposed, which includes coarse match algorithm and improve-ICP registration algorithm. The principal component analysis (PCA) based method can roughly find the posture relationship between the two point clouds. Using z-level dynamic hierarchical, the ICP registration can accurately find the posture between these two clouds. The final registration maximum distance error is 0.03 mm, which is smaller than robot machining error. Secondly, the clear aligner machining process is conducted to verify the registration effectiveness. Before machining, the path is generated based on the well registered gingival curve. After full registration, the tool path is calculated by establishing a local coordinate system between the workpiece and the tool to avoid interference. This path is calculated and generated as an executable program for ABB industrial robots. Finally, the robot was used for flexible cutting of clear aligners and was able to extract products, ensuring the effectiveness of the proposed research. This method can effectively solve the limitations of traditional milling path planning under such complex conditions.

A digitalized analysis of incisal changes among orthodontically treated patients: A retrospective comparative study.

Background: To compare incisor angulation and/or position changes among orthodontically treated patients with metal brackets and clear aligners. Methods: A total of sixty-two participants of both sexes, aged-16-40 years old, with CL I skeletal pattern and mild crowding following strict eligibility criteria were included. The patients were divided into two groups based on their treatment approach. Pre and post lateral cephalograms were collected from Riyadh Elm University (REU) and then digitally analyzed using WEBCEPH (Medical Image Analysis) software. Eight angular and two linear measurements were used for the assessment. Results: The upper incisor angulation and position showed statistically significant differences when orthodontic clear aligners were used. In contrast, no significant difference was observed with the conventional orthodontic treatment. However, the upper incisal palatal root torque decreased after clear aligner therapy compared to conventional treatment. The inter-incisal angle demonstrated a significant increase with clear aligners compared to conventional treatment. Conclusions: The current study revealed the importance of definitive guidelines upon and after treatment, in addition to determining incisor changes. Orthodontic clear aligners are distinct from conventional treatments in controlling the incisors' angulation and position. The expansion treatment modality precedes Interproximal reduction in increasing the arch perimeter.

Effects of different tooth movement patterns and aligner thicknesses on maxillary arch expansion with clear aligners: a three-dimensional finite element study.

Objectives: The objective of this study was to investigate the biomechanical effects of different tooth movement patterns and aligner thicknesses on teeth and periodontal tissues during maxillary arch expansion with clear aligners, to facilitate more precise and efficient clinical orthodontic treatments. Methods: Three-dimensional models including teeth, maxilla, periodontal ligament, and aligner were constructed and subjected to finite element analysis. Tooth displacement trends and periodontal ligament stresses were measured for seven tooth displacement patterns (divided into three categories including overall movement of premolars and molars with gradually increasing molar expansion in each step; distributed movement of premolars and molars; and alternating movement between premolars and molars at intervals) and two aligner thicknesses (0.5 mm and 0.75 mm) during maxillary arch expansion with clear aligners. Results: When expanding the maxillary arch with clear aligners, the effective expansion of the target teeth mainly showed a tilting movement trend. Increasing the amount of molar expansion increased the buccal displacement of the first molar but decreased the buccal displacement of the premolars. The mean buccal displacement of the target teeth was greater in the posterior teeth interval alternating movement group (0.026 mm) than in the premolar/molar distributed movement group (0.016 mm) and the overall movement group (0.015 mm). Increasing aligner thickness resulted in greater buccal displacement of the crowns and increased stress on the periodontal ligaments. Conclusion: Increasing the amount of molar expansion reduces the efficiency of premolar expansion. Alternating movement of premolars and molars at intervals achieves a higher arch expansion efficiency, but attention should be paid to the anchorage of adjacent teeth. Increasing the thickness of the aligner increases the expansion efficiency but may also increase the burden on the periodontal tissues.

Uprighting and protraction of two unilateral mandibular molars using a cantilever arm through a sophisticated biomechanical system with clear aligner: A case report.

Although clear aligner can be efficient and predictable in some tooth movements, mandibular molar protraction is the least predictable owing to biological and biomechanical limitations. This case report presents a 20-year-old female with poor prognosed left mandibular first molar (#36), deviated dental midline and mild crowding. After extraction of #36, clear aligners and an Albert cantilever were used for treatment. Through carefully designed dual mechanical system, we achieved uprighting and protraction of #37 within 27 months, with crown and root movements of 9.9mm and 12.1mm, respectively. The predictability of the crown and root movement was 107.6% and 84.6%. Coincident dental and facial midline, class I molar and canine relationship and good root parallelism were also achieved. Large-distance mandibular molar protraction can be achieved effectively with a combination of Albert cantilever arm and clear aligner.

Tip, torque and rotation of maxillary molars during distalization using Invisalign: a CBCT study.

BACKGROUND: Desirable molar distalization by bodily movement is challenging and can be difficult to achieve. This study investigated changes in molar angulation (mesiodistal tipping), molar inclination (buccolingual torque) and rotation during distalization using clear aligner therapy (CAT). MATERIALS AND METHODS: This retrospective study included 38 cone beam computed tomographic images (CBCTs) taken for patients treated with molar distalization using CAT. The study evaluated pre- (T0) and post-treatment (T1) CBCTs of 19 adult patients (36.68 ± 13.50 years) who underwent maxillary molar distalization using Invisalign® aligners (Align Technology, Inc., San José, CA, USA) with a minimum of 2 mm distalization. Changes in maxillary molar tip, torque and rotation were measured for 61 molars (183 roots). Paired t-test was used to evaluate the differences between pre- and post-treatment readings. The level of significance was set at p ≤ 0.05. The reproducibility of measurements was assessed by the intraclass correlation coefficient (ICC). RESULTS: Molar angulation did not show significant change after distalization (p = 0.158) however, there was significant increase in buccal molar inclination (p = 0.034) and mesiobuccal molar rotation (p < 0.001). CONCLUSION: Molar distalization of 2 mm did not cause significant molar tipping. Maxillary molars showed significant buccal inclination (increased torque) and mesiobuccal rotation after distalization.

Clear aligner therapy practices among orthodontists practicing in Canada.

BACKGROUND: The acceptability and preference for clear aligner therapy (CAT) has been increasing among orthodontists, but there is still a lack of consensus regarding CAT best practices. Consequently, this study aimed to investigate CAT practices among orthodontists practicing in Canada. METHODS: The survey was conducted among orthodontists practicing in Canada using a modified previously published survey. Sixty orthodontists participated (6.1% response rate). It consisted of 11 sections with open and closed questions related to demographic information and particularities about using or not using CAT. The survey responses were exported from REDCap to a Microsoft Excel (Microsoft, Redmond, Wash) spreadsheet, then statistically analyzed using SPSS software (SPSS for Windows, version 21.0; IBM Inc., Armonk, NY, USA). The comments were categorized under themes and subthemes. Data were organized in descriptive statistics, expressing frequencies and percentages. RESULTS: Almost 30% of the orthodontist's annual caseload was treated with CAT, most frequently prescribed to adult patients. Case complexity and patient cooperation were the factors that most influenced the decision to prescribe CAT. Almost half of orthodontists reported sometimes combining CAT with adjunctive fixed appliances. CONCLUSIONS: Most orthodontists prescribe CAT, and its use is based on the malocclusion's complexity. Orthodontists who do not prescribe CAT believe that fixed appliance therapy has superior treatment outcomes.

A Cross-Sectional Survey of the Use of Clear Aligners by General Dentists in Australia.

OBJECTIVES: The primary aim of the investigation was to survey clear aligner therapy (CAT) use among general dentists in Australia. A secondary aim was to evaluate the factors that influenced general dentists in Australia not to provide CAT. MATERIAL AND METHODS: General dentists registered with the Australian Health Practitioner Regulation Agency were invited to participate in a structured cross-sectional electronic survey. The survey covered demographics, preferred CAT systems and practices, relevant treatment planning and retention protocols, patient-reported CAT issues, pertinent respondent opinions, and reasons for not providing CAT. Descriptive statistics were computed via GraphPad Prism v10 (GraphPad Software Inc., La Jolla, CA, USA). RESULTS: Most of the 264 (n = 172; 65.2%) respondents indicated that they provided CAT. The majority (n = 82; 58.6%) reported that they treated between 1 and 20 patients with CAT annually. Invisalign was the most used system (n = 83; 61.2%), with 55 (41.7%), indicating that they used more than one system. Most (n = 124; 98.4%) were comfortable using CAT for mild crowding, whereas 73.4% (n = 94) were not comfortable in treating severe crowding with CAT. The median (IQR) number of patients per respondent treated with extraction of a permanent incisor or premolar was 0 (0). Issues regarding tooth positions were reportedly always or mostly in need of change in the initial treatment plan by 68.7%. Problems regarding patient compliance with CAT wear protocols (n = 67; 45.6%) and the predictability of treatment outcomes (n = 31; 21.1%) were the most identified themes of the free-text comments. Over 80% of those who did not provide CAT indicated that they preferred to refer to an orthodontist for management. CONCLUSION: Almost two-thirds of the respondents provided CAT. Invisalign was the most used system. The majority use CAT combined with nonextraction treatment. Most of those who did not provide CAT preferred to refer to an orthodontist for patient management.

Integration of autonomous maximal smile 3D image with digital 3D dental model and investigation of its accuracy.

OBJECTIVES: This study aims to establish an approach to integrate autonomous maximal smile (AMS) 3D facial image with digital 3D dental models to demonstrate the digital orthodontic set-up in the 3D facial context. METHODS: Using Geomagic Studio software, the AMS 3D facial image and pre-treatment dental model were manually and globally registered. Subsequently, the pre-treatment dental model was substituted with the predicted post-treatment dental model. The intraoral region of the AMS 3D facial image was removed, achieving a conjunctive display of the AMS 3D facial image and the post-treatment dental set-up. The distances between four groups of corresponding landmark pairs on the AMS 3D facial image and the pre-treatment dental set-up were calculated, and the accuracy of the registration operation was evaluated by paired t-test. RESULTS: The novel approach effectively facilitated the integration of AMS 3D facial images with the pre-treatment and predicted post-treatment 3D dental models. The average distances between the pairs of points were (1.19±0.55) mm and (1.55±0.59) mm for the two registrations, respectively. Notably, no statistically significant difference was observed between the two measurements (P>0.05), indicating a high agreement (intraclass correlation coefficient=0.914). CONCLUSIONS: This study established an approach to integrate AMS 3D facial images with digital 3D dental models. Through this approach, the digital orthodontic set-up design can be displayed in the context of a 3D facial image, which may help to improve the quality of outcome set-up in digital orthodontics, such as clear aligner therapy.

Predictability of expansion movements performed by clear aligners in mixed dentition in both arches: a retrospective study on digital casts.

BACKGROUND: to evaluate the predictability of expansion achieved in patients in early mixed dentition treated with Clear Aligners (CA), analyzing the efficiency of the expansion at the end of the first set of aligners and at the end of the therapy in the upper and lower arch. METHODS: 36 patients (20 F, 16 M; mean age 8.3 ± 1.5 years) were selected retrospectively from the Department of Orthodontics of the Hospital of Rome "Tor Vergata". All subjects were treated with CA with no other auxiliaries than attachments. For each patient a standardized sequential expansion protocol was planned for both arches. Digital dental casts were created at three observation periods from an intraoral scanner: prior to treatment (T0), at the end of the first set of aligners (T1), at the end of treatment (T2). The 3D models in planned position determined by the first Clincheck (CC) were obtained for comparison with T1 and T2. Six linear transversal measurements were used to evaluate the dimensional changes and the predictability of expansion movements, comparing T1-CC and T2-CC. RESULTS: a statistically significant increase within the pre-treatment and the final outcomes for all the variables examined was found. In the upper arch, the greatest level of predictability was detected at the level of the first (46.44%) and second deciduous molar width (44.95%) at T1. The analysis of T2-CC changes showed a significant increase in the percentage of predictability of expansion at the level of the first permanent molars, at mesial (54.86%) and distal (58.92%) width. In the lower arch, a higher percentage of predictability than the upper arch was reported at T1-CC and T2-CC, with the greatest values at the level of second (T1-CC: 48.70%; T2-CC: 75.32%) and first deciduous molar width (T1-CC: 45.71%; T2-CC: 72.75%). CONCLUSIONS: CA can induce significant transversal increments. The predictability of expansion is variable, but it did not exceed the 50% during the first set of aligners. It was necessary to apply refinement set to achieve a good predictability for expansion of about 70%. The expansion in the lower arch was observed to be more predictable than in the upper arch.

Dentists' Perception of Mysmartalign Clear Aligner Treatment.

Aim and Objective: To assess the dentist perception of efficiency, treatment outcome, and stability of the tooth movement treated with mysmartalign clear aligner therapy (MSA CAT). Materials and Method: A cross-sectional web-based questionnaire survey was carried out to evaluate the dentist perception of MYSMARTALIGN (MSA). To determine the sample size, a pilot study has been carried out and the final sample arrived was 4990 subjects. The current study's inclusion criteria took into account those who had finished their BDS and MDS as well as dentists and orthodontists who had been using the MSA CAT system on their patients for the previous 7 years. Results: The result of the study showed that most research participants (3650) used MSA to treat mild to moderate malocclusion, and 3996 participants said that initial digital treatment plans have been authorised with no revisions. In view of efficiency, 3894 doctors were satisfied with the final outcome. Conclusions: Finally concluded that recent survey showed that dentists were very satisfied with the effectiveness and treatment results of the MSA clear aligner procedure.

Finite element analysis of the mechanical behavior of 3D printed orthodontic attachments used in aligner treatment.

The composite attachment loss during orthodontic clear aligner therapy is an adverse event that commonly happens in clinical practice and can affect the overall outcome and length of treatment. The aim of our research is to provide a basis for the further study of an innovative digital protocol and application method for orthodontic aligner attachments. Two 3D models were designed, one based on the proposed protocol and the other on the conventional method for aligner attachment application. Four attachment shapes were used to identify the maximum values for the von Mises equivalent stresses, the maximum displacements values and the areas in which these values were recorded through FEM analysis. The results of the mechanical simulation show lower values of von Mises stress recorded in the 3D printed attachments assemblies, independent of their shape, when simulated under the same boundary and load conditions. The trapezoidal prism shaped 3D printed model has a 3.7 times smaller displacement value (0.088 [mm]) compared to the adhesive resin model (0.326 [mm]). In conclusion, the proposed protocol for aligner attachments and the introduction of innovative materials is a promising method of solving conventional attachment problems in current orthodontic treatments.

Effects of different intrusion patterns during anterior teeth retraction using clear aligners in extraction cases: an iterative finite element analysis.

Background: Overtreatment design of clear aligner treatment (CAT) in extraction cases is currently primarily based on the clinical experience of orthodontists and is not supported by robust evidence on the underlying biomechanics. This study aimed to investigate the biomechanical effects of overtreatment strategies involving different maxillary anterior teeth intrusion patterns during anterior teeth retraction by CAT in extraction cases. Materials and methods: A finite element model of the maxillary dentition with the first premolar extracted was constructed. A loading method of clear aligners (CAs) based on the initial state field was proposed. The iterative method was used to simulate the long-term orthodontic tooth movement under the mechanical load exerted by the CAs. Three groups of CAs were utilized for anterior teeth retraction (G0: control group; G1: incisors intrusion group; G2: anterior teeth intrusion group). Tooth displacement and occlusal plane rotation tendency were analyzed. Results: In G0, CAT caused lingual tipping and extrusion of the incisors, distal tipping and extrusion of the canines, mesial tipping, and intrusion of the posterior teeth. In G1, the incisors showed minimal extrusion, whereas the canines showed increased extrusion and distal tipping tendency. G2 showed the smallest degree of posterior occlusal plane angle rotation, while the inclination tendency of the canines and second premolars decreased. Conclusion: 1. In CAT, tooth displacement tendency may change with increased wear time. 2. During anterior teeth retraction, the incisor intrusion pattern can provide effective vertical control for the lateral incisors but has little effect on the central incisors. Anterior teeth intrusion patterns can alleviate the inclination of canines and second premolars, resulting in partial relief of the roller-coaster effect.

Clear Aligners in Pediatric Dentistry: A Scoping Review.

Today not just adults but also children are affected by their looks and appearance. Their facial and dental appearance primarily influence how they present themselves in the outside world. Poor esthetic appearance at any age, especially when it comes to children, affects their psychological status. In earlier times, correction of dentition used to be done with crude methods, after which came the concept of braces, which were fixed on the labial surfaces. Even with these, the patients are equally concerned with their looks throughout the treatment, and thus neither adults nor children are eager to use the standard metallic-looking orthodontic gear. To tackle this problem, researchers have developed several solutions, and clear aligners are the modern and aesthetic answer. For effective tooth movement into the desired position, thin, transparent, plastic aligners known as invisible aligners are used, which are created using the computer-aided design/computer-aided manufacturing (CAD-CAM) technology. These aligners are analogous to the splints that cover the clinical crowns as well as the marginal gingiva. The treatment requires proper patient motivation as there can be poor compliance by patients. However, it can offer greater dental hygiene, comfort, and an excellent aesthetic experience during treatment. This review highlights the history of fabrication of clear aligners, examining the efficacy, advantages, and disadvantages of transparent aligners for pediatric patients and also dentists. It weighs aspects like aesthetic appeal, comfort, oral hygiene, treatment predictability, and practice efficiency when comparing transparent aligners, like Invisalign, to conventional orthodontic treatments. It also ascertains the applicability and worth of clear aligners in contemporary orthodontic practice, while examining patient happiness, compliance, and overall treatment results.