Mechanosignaling-related angiocrine factors drive osteoblastic phenotype in response to zirconia.

BACKGROUND: The growing use of zirconia as a ceramic material in dentistry is attributed to its biocompatibility, mechanical properties, esthetic appearance, and reduced bacterial adhesion. These favorable properties make ceramic materials a viable alternative to commonly used titanium alloys. Mimicking the physiological properties of blood flow, particularly the mechanosignaling in endothelial cells (ECs), is crucial for enhancing our understanding of their role in the response to zirconia exposure. METHODS: In this study, EC cultures were subjected to shear stress while being exposed to zirconia for up to 3 days. The conditioned medium obtained from these cultures was then used to expose osteoblasts for a duration of 7 days. To investigate the effects of zirconia on osteoblasts, we examined the expression of genes associated with osteoblast differentiation, including Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Additionally, we assessed the impact of mechanosignaling-related angiocrine factors on extracellular matrix (ECM) remodeling by measuring the activities of matrix metalloproteinases 2 and 9 (MMP2 and MMP9) during the acquisition of the osteogenic phenotype, which precedes mineralization. RESULTS: Our data revealed that mechanosignaling-related angiocrine factors play a crucial role in promoting an osteoblastic phenotype in response to zirconia exposure. Specifically, exposed osteoblasts exhibited significantly higher expression levels of genes associated with osteoblast differentiation, such as Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Furthermore, the activities of MMP2 and MMP9, which are involved in ECM remodeling, were modulated by mechanosignaling-related angiocrine factors. This modulation is likely an initial event preceding the mineralization phase. CONCLUSION: Based on our findings, we propose that mechanosignaling drives the release of angiocrine factors capable of modulating the osteogenic phenotype at the biointerface with zirconia. This process creates a microenvironment that promotes wound healing and osseointegration. Moreover, these results highlight the importance of considering the mechanosignaling of endothelial cells in the modulation of bone healing and osseointegration in the context of blood vessel effects. Our data provide new insights and open avenues for further investigation into the influence of mechanosignaling on bone healing and the osseointegration of dental devices.

Effects of LED Lights on Bulk Fill Resin Polymerization

The present study analyzed the microhardness and degree of conversion of three Bulk Fill resins (M1 - Filtek Bulk Fill; M2 - Tetric N-Ceram Bulk Fill and M3 - Opus Bulk Fill) polymerized by single peak and polywave Light-emitting Diode Curing Lights. A total 90 test specimens (n=10) were obtained using a Teflon matrix for the purpose of testing microhardness; and for degree of conversion: 135 specimens (n=5) by using a 2 x 6 cm matrix. The specimens were light polymerized using 3 light sources (L1 - Optilight Max, L2 - Bluephase, L3 - VALO). They were kept in artificial saliva om an oven at 37±1°C during the experiment. The degree of conversion was measured by FTIR 24 h after obtaining each test specimen. The microhardness readouts were performed with a microdurometer at the time intervals of 48 hours (T0), 7 days (T1), 14 days (T2) and 21 days (T3). M1L3 was found to show the highest microhardness values in T2, and M1 showed the lowest degree of conversion in the deep third with L1. It was concluded that Filtek Bulk Fill resin showed the best results in comparison with the other resins.

El presente estudio analizó la microdureza y el grado de conversión de tres resinas Bulk Fill (M1 - Filtek Bulk Fill; M2 - Tetric N-Ceram Bulk Fill y M3 - Opus Bulk Fill) polimerizadas por lámparas de curado de diodo emisor de luz de pico único y polionda. Se obtuvieron un total de 90 especímenes de prueba (n=10) utilizando una matriz de teflón con el propósito de probar la microdureza; y para grado de conversión: 135 especímenes (n=5) utilizando una matriz de 2 x 6 cm. Las muestras se fotopolimerizaron utilizando 3 fuen- tes de luz (L1 - Optilight Max, L2 - Bluephase, L3 - VALO). Se mantuvieron en saliva artificial en estufa a 37 ±1°C durante el experimento. El grado de conversión se midió por FTIR 24 h después de obtener cada muestra de prueba. Las lecturas de microdureza se realizaron con un microdurómetro en los intervalos de tiempo de 48 horas (T0), 7 días (T1), 14 días (T2) y 21 días (T3). Se encontró que M1L3 mostraba los valores más altos de microdureza en T2, y M1 mostraba el grado más bajo de conversión en el tercio profundo con L1. Se concluyó que la resina Filtek Bulk Fill mostró los mejores resultados en comparación con las demás resinas.

Effect of the type of resin cement on the fracture resistance of chairside CAD-CAM materials after aging.

PURPOSE: The study objective was to evaluate the influence of the type of resin cement on the flexural strength and load to fracture of two chairside CAD-CAM materials after aging. MATERIALS AND METHODS: A polymer-infiltrated ceramic network (PICN) and a nanoceramic resin (RNC) were used to produce the specimens. Two types of dual-cure resin cements, a self-adhesive and a universal, were investigated. Bilayer specimens were produced (n = 10) and aged for 6 months in a humid environment before the biaxial flexural strength test (σf). Bonded specimens were subjected to a mechanical aging protocol (50 N, 2 Hz, 37℃ water, 500,000 cycles) before the compressive load test (Lf). σf and Lf data were analyzed using two-way ANOVA and Tukey tests (α = .05). Chi-square test was used to analyze the relationship between failure mode and experimental group (α = .05). RESULTS: The type of resin cement and the interaction between factors had no effect on the σf and Lf of the specimens, while the type of restorative material was significant. RNC had higher σf and Lf than PICN. There was a significant association among the type of cracks identified for specimens tested in Lf and the restorative material. CONCLUSION: The type of resin cement had no effect on the flexural strength and load to fracture of the two investigated CAD-CAM chairside materials after aging.

Bioactive Restorative Materials Applied over Coronal Dentine-A Bibliometric and Critical Review.

The objective of the research was to examine the scientific literature concerning restorative materials with bioactive properties for the purpose of covering dentin. Searches were performed in various databases including MEDLINE, Scopus, Web of Science, Cochrane Library, Lilacs/BBO, and Embase. Inclusion criteria involved studies that utilized the terms "dentin" and "bioactive", along with "ion-releasing", "smart materials", "biomimetic materials" and "smart replacement for dentin". The information extracted included the title, authors, publication year, journal and the country of affiliation of the corresponding author. The studies were categorized based on their study design, type of material, substrate, analytical method, and bioactivity. A total of 7161 records were recovered and 159 were included for data extraction. Most of the publications were in vitro studies (n = 149), testing different types of materials in sound dentine (n = 115). Most studies were published in Dental Materials (n = 29), and an increase in publications could be observed after the year 2000. Most of the articles were from the USA (n = 34), followed by Brazil (n = 28). Interfacial analysis was the most investigated (n = 105), followed by bond strength (n = 86). Bioactivity potential was demonstrated for most tested materials (n = 148). This review presents insights into the current trends of bioactive materials development, clearly showing a severe lack of clinical studies.

Effect of Color and Surface Roughness of Glass Ionomer Cements Submitted to Solutions Based on Ilex paraguariensis

ABSTRACT: The present study analyzed the color change (DE) and surface roughness (Ra) of glass ionomer cements (GICs) subjected to typical herbaceous South American beverage action - Ilex paraguariensis. 90 specimens (n = 10) were made: M1 - GIC Riva Light Cure® (SDI); M2 - GIC Riva Self Cure® (SDI); M3 - GIC Vitremer® (3M ESPE). After light curing/ polymerization of GICs, specimens were divided for being submitted to solutions for one hour a day for 21 days: S1 - Yerba Mate Pajarito Traditional (Pajarito); S2 - Erva Mate Chimarrão (Barão de Cotegipe); S3 - Water (control). Four DE and Ra readings were taken: T0 - initial; T1 - 7 days; T2 - 14 days and T3 - 21 days, with a spectrophotometer and a roughness meter respectively. The obtained data were submitted to ANOVA statistical analysis and Bonferroni. S1 and S2 at T1 and T2 there was no statistical difference between the materials, and at T3 Materials M1=M2, M1=M3, and M2>M3. For S3 at T1, T2 and T3 there was no difference between the materials. Analyzing surface roughness, there was no statistical significance. Concluded that all materials changed color with greater influence of time, but without changing surface roughness.

RESUMEN: En el presente estudio se analizó el cambio de color (DE) y la rugosidad superficial (Ra) de los cementos ionómero de vidrio (CIV) sometidos a la acción típica de las bebidas herbáceas sudamericanas - Ilex paraguariensis. Se realizaron 90 especímenes (n = 10): M1 - GIC Riva Light Cure® (SDI); M2 - GIC Riva Self Cure® (SDI); M3 - GIC Vitremer® (3M ESPE). Después de la fotopolimerización/ polimerización de los CIV, los especímenes se dividieron y fueron sometidos a soluciones durante una hora al día durante 21 días: S1 - Yerba Mate Pajarito Tradicional (Pajarito); S2 - Erva Mate Chimarrão (Barão de Cotegipe); S3 - Agua (control). Se tomaron cuatro lecturas de DE y Ra: T0 - inicial; T1 - 7 días; T2 - 14 días y T3 - 21 días, con espectrofotómetro y rugosímetro respectivamente. Los datos obtenidos fueron sometidos a análisis estadístico ANOVA y Bonferroni. S1 y S2 en T1 y T2 no hubo diferencia estadística entre los materiales y en T3 Materiales M1=M2, M1=M3 y M2>M3. Para S3 en T1, T2 y T3 no hubo diferencia entre los materiales. Al analizar la rugosidad de la superficie, no hubo significación estadística. En conclusion, todos los materiales cambiaron de color con mayor influencia del tiempo, pero sin cambiar la rugosidad de la superficie.

Glass ionomer cement modified by a imidazolium salt: adding antifungal properties to a biomaterial.

We present the structural modification of a commercially available glass ionomer cement by inserting the imidazolium salt 1-n-hexadecyl-3-methylimidazolium chloride (C16MImCl), composing a new biomaterial with antifungal biofilm activity. Test specimens were prepared using a commercial glass ionomer cement to which 10 ppm of cetylpyridinium chloride (reference ionic antifungal agent) or C16MImCl were added. The feasibility and hypoallergenicity of the new biomaterial were assessed by microhardness plastic deformation and chorioallantoic membrane assays. Colony counting and scanning electron microscopy were used to evaluate the modified specimens' antibiofilm activity against three multidrug-resistant Candida species. The modified glass ionomer cement presented a strong antibiofilm activity against Candida spp., without losing its original micromechanical and hypoallergenic properties, rendering it a promising candidate for further application in dentistry.

Is it worth using low-cost glass ionomer cements for occlusal ART restorations in primary molars? 2-year survival and cost analysis of a Randomized clinical trial.

OBJECTIVE: To evaluate the 2-year survival rate and the cost-effectiveness of Atraumatic Restorative Treatment (ART) using three different glass ionomer cements (GICs) for restoring occlusal dentin caries lesions in primary molars. METHODS: One hundred and fifty (150) 4-8-year-old children were selected, randomly allocated and treated in school tables according to the restorative material: Fuji IX Gold Label (GC Corp), Vitro Molar (nova DFL) and Maxxion R (FGM), the latter two being low-cost brands. Materials and professionals' costs were considered to analyse baseline total cost, and from this the cumulative cost of each treatment was calculated. Restoration assessments were performed after 2, 6, 12 and 24 months by an independent calibrated examiner. Restoration survival was estimated using Kaplan-Meier survival analysis and Cox regression was used to test association with clinical factors. Bootstrap regression (1,000 replications) compared material´s cost over time and Monte-Carlo simulation was used to build cost-effectiveness scatter plots. RESULTS: The overall survival rate of occlusal ART restorations after 2 years was 53% (Fuji IX = 72.7%; Vitro Molar = 46.5%; Maxxion R = 39.6%). Restorations performed with Vitro Molar and Maxxion R were more likely to fail when compared to Fuji IX. At baseline, Fuji IX was the more expensive option (p < 0.001), however, considering the simulation of accumulated cost caused by failures until 2-year evaluation, no difference was found between the groups. CONCLUSIONS: After 2 years' follow up, restorations performed with Fuji IX proved to be superior in terms of survival, with a similar overall cost, when compared to low-cost glass ionomers cements (Vitro Molar and Maxxion R).

Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of composition strategies.

PURPOSE: A systematic review was conducted to determine whether there were composition strategies available to reduce and control polymerization shrinkage stress development in resin-based restorative dental materials. DATA SOURCES: This report was reported in accordance with the PRISMA Statement. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO. STUDY SELECTION: Only laboratory studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis, or theoretical and mathematical models were excluded. Of the 6113 eligible articles, 62 studies were included in the qualitative analysis, and the meta-analysis was performed with 58 studies. The composition strategy was subdivided according to the modified part of the material: filler phase, coupling agent, or resin matrix. A global comparison was performed with random-effects models (α = 0.05). The only subgroup that did not show a statistical difference between the alternative strategy and the control was 'the use of alternative photo-initiators' (p = 0.29). CONCLUSION: Modification of the resin matrix made the largest contribution to minimizing stress development. The technology used for decreasing stress in the formulation of low-shrinkage and bulk-fill materials was shown to be a promising application for reducing and controlling stress development.

Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of technique protocol and photo-activation strategies.

PURPOSE: A systematic review was conducted to determine whether there were any alternative technique or additional step strategies available to reduce and control polymerization shrinkage stress development in dental resin-based restorative materials. DATA SOURCES: This report followed the PRISMA Statement. A total of 36 studies were included in this review. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO. STUDY SELECTION: Only in vitro studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis or mathematical models were excluded. Of the 6.113 eligible articles, 36 studies were included in the qualitative analysis, and the meta-analysis was performed with 25 studies. A global comparison was performed with random-effects models (α = 0.05). The strategies were subdivided as follows: the use of an alternative technique protocol of placing the material inside the tooth cavity; the modification of the irradiation intensity or total energy delivered to the material; the use of an alternative light-curing source; or the use of an alternative photo-activation mode. All alternative strategies showed statistically significant differences when compared with their respective controls (p < 0.05). CONCLUSION: The use of alternative light-curing sources contributed more to minimizing stress development than placing the material by means of an alternative technique protocol or by modifying the irradiant intensity or total energy delivered to the material during photo-activation. Moreover, the use of an alternative photo-activation mode (intermittent light, exponential, soft-start or pulse delay modes) was shown to be an effective strategy for reducing and controlling stress development in resin-based dental materials.

Novo componente de transferência para implantes. Estudo in vitro / New transfer component for dental implants. In vitro study

Os autores avaliaram, em um microscópio eletrônico de varredura (MEV), a precisão da moldagem de transferência de implantes de hexágono externo por meio de um novo modelo de transferente, comparando-o com a técnica do transferente quadrado. Foram realizadas 40 moldagens, 20 com componente de transferência quadrado (grupo-controle) e 20 com o componente de transferência implant smart transfer ­ IST (grupo-teste), a partir de um modelo acrílico padronizado com três réplicas de implantes de hexágono externo posicionados na região posterior, simulando uma condição clínica em mandíbula. Uma estrutura metálica padrão em liga de titânio foi parafusada sobre os análogos dos modelos obtidos sob torque de 10 Ncm. Foram realizadas leituras na face vestibular e na face lingual do conjunto análogo/estrutura padrão, tendo a posição central como ponto de eleição. Os resultados foram analisados estatisticamente (p-valor=0,05) e, embora tenham havido diferenças médias entre os grupos, as mesmas não foram estatisticamente significantes. Foi possível concluir que não existe diferença na precisão das moldagens de implantes realizadas com componente de transferência quadrado e o modelo implant smart transfer para prótese parcial fixa.

The authors evaluated by scanning electron microscopy (SEM), precision impression transfer of external hex implants through a new transfer model by comparing it with the technical square transfer. Fourty impressions were made; 20 with square transfer component (control) and 20 with the IST transfer component (test) from a standard acrylic model with three external hexagon implant replicas positioned in the posterior region simulating a clinical jaw condition. A titanium framework was screwed onto the implant analogs with a 10 Ncm torque. Three measurements were performed on the buccal aspect and three on the lingual surface, with the middle position as election point. The results were analyzed statistically (p=0.05), although there have been average differences between the groups, they were not statistically significant. It was concluded there was no difference in the accuracy of impression made with square transfer component and implant smart transfer model for fixed partial dentures.

Toxicity analysis of ocular prosthesis acrylic resin with or without pigment incorporation in human conjunctival cell line.

The aim of this study was to evaluate the influence of pigment incorporation on the cytotoxicity of ocular prosthesis N1 color acrylic resin. Nine samples were manufactured by heat-polymerization in water bath and divided into 3 groups: acrylic resin without pigment incorporation (group R), acrylic resin with pigment incorporation (group RP), and acrylic pigment (group P). Eluates formed after 72h of sample immersion in medium were incubated with conjunctival cell line (Chang conjunctival cells) for 72h. The negative control group consisted in medium without samples (group C). The cytotoxic effect from the eluates was evaluated using MTT assay (cell proliferation), ELISA assay (quantification of IL1ß, IL6, TNF α and CCL3/MIP1α) and RT-PCR assay (mRNA expression of COL IV, TGF ß and MMP9). Data were submitted to ANOVA with Bonferroni post-tests (p<0.05). All groups were considered non-cytotoxic based on cell proliferation. However, resin with pigment incorporation showed significant IL6 quantity increase. Resin without pigment incorporation exhibited higher mRNA expression of COL IV, MMP9 and TGF ß, however it was also observed for the negative control group. The materials exhibited divergent biological behavior. Despite the pigment incorporation that resulted in an increase of IL6, no cytotoxicity was observed based on cell proliferation.

Restorative materials containing antimicrobial agents: is there evidence for their antimicrobial and anticaries effects? A systematic review.

The aim of this systematic literature review was to investigate whether the incorporation of antimicrobial agents into dental restorative materials truly exerts an antimicrobial effect against common cariogenic bacteria (primary outcome), and whether the inclusion of antimicrobial agents is able to prevent caries around restorations (secondary outcome). MEDLINE, via PubMed, was searched for papers published between 1980 and 30 November 2014. A total of 1126 articles were retrieved. After inclusion/exclusion assessment, 147 full text articles were read and included in the review, comprising 130 in vitro, 1 in situ, and 4 in vivo studies, as well as 12 literature reviews. In about 78% of in vitro studies, and in all identified in situ and in vivo studies, a positive antimicrobial effect had been found. However, the anticaries effect had not been tested in any of the selected studies. It was concluded that there is indeed evidence that restorative dental materials containing antimicrobial agents exert an antimicrobial effect, both in laboratory and in clinical studies. However, no evidence has been found regarding the role of these agents in preventing or controlling dental caries, or in preventing caries around restorations.

Planejamento integrado periodontal e restaurador – relato de caso clínico / Integrated Periodontal and Restorative Planning – Case report

A aparência dos dentes e do tecido gengival ao redor dos mesmos tem um papel muito importante na estética da região anterior da maxila tendo em vista que, anormalidades na simetria e no contorno podem afetar significativamente a harmonia de uma dentição natural. O aumento de coroa clínica estético seguido de reanatomização dos dentes vem se tornando uma opção viável para pacientes com discrepâncias gengivais e dentárias. O objetivo do presente trabalho é apresentar o planejamento integrado periodontal e restaurador proposto em um caso clínico. O paciente foi diagnosticado com alterações na linha gengival do sorriso e presença de discrepâncias dentárias. Ele foi submetido à instrução de higiene bucal e rigoroso controle de placa bacteriana. Após o estudo do caso com auxílio de modelos de gesso, optou-se pela realização do aumento de coroa clínica estética e reanatomização dos dentes antero-superiores com resina composta. Este trabalho evidenciou a necessidade de um conhecimento multidisciplinar do cirurgião-dentista para realização de um plano de tratamento adequado, visando maior harmonia e estética do sorriso, buscando a satisfação do paciente para o sucesso final do tratamento.

The appearance of the teeth and the soft tissue around them have an important role in aesthetics of the maxillary anterior region since abnormalities in symmetry and contour can significantly affect the harmony of a natural dentition. The surgical crown lengthening and reconstruction of anterior teeth are becoming a viable option for patients with dento-gingival discrepancies. The aim of the present study is to show the integrated Periodontal and Restorative treatment planning porposed for the patient. The one showed excessive gingival display and tooth discrepancies. First of all the patient got oral hygiene instruction and underwent a rigorous plaque control. After analysing the case with the aid of study models, aesthetics crown lengthening was perfomed and reconstruction of anterior teeth with composite resin restorations were done. This paper has highlighted the need for a multidisciplinary knowledge of the dentist to suggest an appropriate treatment plan, seeking greater harmony and aesthetics of the smile and patients’ satisfaction for the success of treatment.

Effect of splinting in accuracy of two implant impression techniques.

Because there is no consensus in the literature about the need for a splint between copings, the aim of this study was to evaluate, in vitro, the accuracy of 2 impression techniques for implant-supported prostheses. A master cast was fabricated with four parallel implant abutment analogs and a passive framework. Two groups with 5 casts each were formed: Group 1 (squared impression copings with no splint: S) and Group 2 (splinted squared impression copings, using metal drill burs and Pattern resin: SS). The impression material used was polyvinyl siloxane with open trays for standard preparation of the casts. For each cast, the framework was positioned, and a titanium screw was tightened with 10 N·cm torque in analog A, after which measurements of the abutment-framework interface gaps were performed at analogs C and D. This process was repeated for analog D. These measurements were analyzed using software. A one-way analysis of variance (ANOVA) with a confidence interval of 95% was used to analyze the data. Significant differences were detected between S and SS in relation to the master cast (P ≤ 0.05). The median values of the abutment-framework interface gaps were as follows: master cast: 39.64 µm; squared impression copings with no splint: 205.86 µm; splinted squared impression copings: 99.19 µm. Under the limitations of this study, the technique presented for Group 2 produces better results compared with the technique used for Group 1.

Qualidade de três tipos de cimentos de ionômeros de vidro utilizados em Postos de Saúde Pública: um estudo in vitro / Quality of three ionomers cements used in Public Health Service: an in vitro study

A resistência à tração diametral (TD) é um requisito essencial para o sucesso clínico das restaurações. Dessa forma, este estudo objetivou avaliar a resistência à TD de três tipos cimentos ionômero de vidro (CIV) em comparação com uma resina composta, todos utilizados em seis postos de saúde pública do município de Duque de Caxias/RJ. O TD foi realizado em uma máquina universal com uma célula de carga de 200 Kgf. Os valores médios de resistência à TD, em MPa, foram: 11,46 (CIV A), 10 (CIV B), 31 (CIV C) e 38,13 (Resina). Os resultados foram analisados pelos testes Anova e Turkey (p < 0,05). Concluiu-se que os CIVs apresentaram resistência à TD semelhante entre eles, porém inferior à resina, mas ainda sendo uma ótima opção para restauração preconizada pelo Serviço Público de Saúde (SUS).

The diametric tensile strength (DT) is a prerequisite for clinical success of restoration. Thus, this study aimed to evaluate the resistance of DT of three types of glass ionomer cements (IO) for restorative, and compare with a composite resin. Eight samples of each material were using by bipartite matrices. All of the materials were used according to manufacturers. The DT test was performed using a universal testing machine with a load of 200 kgf. The results were analyzed using Anova and Turkey (p <0.05). Mean values for resistance to DT in MPa were: 11.46 (IO A), 10 (IO B), 31 (IO C) and 38.13 (Resin composite). We concluded that IO showed similar DT among themselves.

Agentes antimicrobianos nos sistemas adesivos / Quality of three ionomers cements used in Public Health Service: an in vitro study

A resistência à tração diametral (TD) é um requisito essencial para o sucesso clínico das restaurações. Dessa forma, este estudo objetivou avaliar a resistência à TD de três tipos cimentos ionômero de vidro (CIV) em comparação com uma resina composta, todos utilizados em seis postos de saúde pública do município de Duque de Caxias/RJ. O TD foi realizado em uma máquina universal com uma célula de carga de 200 Kgf. Os valores médios de resistência à TD, em MPa, foram: 11,46 (CIV A), 10 (CIV B), 31 (CIV C) e 38,13 (Resina). Os resultados foram analisados pelos testes Anova e Turkey (p < 0,05). Concluiu-se que os CIVs apresentaram resistência à TD semelhante entre eles, porém inferior à resina, mas ainda sendo uma ótima opção para restauração preconizada pelo Serviço Público de Saúde (SUS).

The diametric tensile strength (DT) is a prerequisite for clinical success of restoration. Thus, this study aimed to evaluate the resistance of DT of three types of glass ionomer cements (IO) for restorative, and compare with a composite resin. Eight samples of each material were using by bipartite matrices. All of the materials were used according to manufacturers. The DT test was performed using a universal testing machine with a load of 200 kgf. The results were analyzed using Anova and Turkey (p <0.05). Mean values for resistance to DT in MPa were: 11.46 (IO A), 10 (IO B), 31 (IO C) and 38.13 (Resin composite). We concluded that IO showed similar DT among themselves.

Biocompatibility and setting time of CPM-MTA and white Portland cement clinker with or without calcium sulfate

Objective: To evaluate the biocompatibility and the setting time of Portland cement clinker with or without 2% or 5% calcium sulfate and MTA-CPM. Material and Methods: Twenty-four mice (Rattus norvegicus) received subcutaneously polyethylene tubes filled with Portland cement clinker with or without 2% or 5% calcium sulfate and MTA. After 15, 30 and 60 days of implantation, the animals were killed and specimens were prepared for microscopic analysis. For evaluation of the setting time, each material was analyzed using Gilmore needles weighing 113.5 g and 456.5 g, according to the ASTM specification Number C266-08 guideline. Data were analyzed by ANOVA and Tukey's test for setting time and Kruskal-Wallis and Dunn test for biocompatibility at 5% significance level. Results: Histologic observation showed no statistically significant difference of biocompatibility (p>0.05) among the materials in the subcutaneous tissues. For the setting time, clinker without calcium sulfate showed the shortest initial and final setting times (6.18 s/21.48 s), followed by clinker with 2% calcium sulfate (9.22 s/25.33 s), clinker with 5% calcium sulfate (10.06 s/42.46 s) and MTA (15.01 s/42.46 s). Conclusions: All the tested materials showed biocompatibility and the calcium sulfate absence shortened the initial and final setting times of the white Portland cement clinker.

Avaliação da atividade antimicrobiana de um reembasador resiliente combinado a um polímero antimicrobiano sobre a formação de biofilme / Evaluation of antimicrobial activity of the resilient soft liner combined with antimicrobial polymer on biofilm formation

Este estudo avaliou a atividade antimicrobiana de um reembasador resiliente Coe Soft® (RRCS) combinado ao polímero antimicrobiano poli (2 tert-butilaminoetil) metacrilato (PTBAEMA) sobre formação de biofilme de Staphyloccocus aureus, Streptococcus mutans e Candida albicans. Espécimes circulares (15mm x 3mm) do RRCS foram confeccionados (n=27), esterilizados, divididos em três grupos de acordo com as concentrações de PTBAEMA a 0% (controle), 10% e 25% e individualmente inoculados em tubos de falcon contendo 5mL de caldo RPMI para os fungos, TSB para S. aureus e BHI para S. mutans e mantidos em overnight a 37ºC em incubadora com agitação orbital a 75rpm, sendo o S. mutans em microaerofilia. Após a inoculação dos espécimes seguiu-se a formação e maturação do biofilme a 37ºC sob agitação orbital a 75rpm. Em seguida cada espécime foi transferido para tubos contendo PBS e diluições seriadas foram realizadas. Alíquotas dessas diluições foram semeadas em placas de Petri e incubadas a 37ºC por 48h. Os dados obtidos foram transformados em log (UFC+1)/mL, considerando-se α=0,05. Os resultados demonstraram que o grupo contendo 25% de PTBAEMA inibiu completamente a formação de biofilme de S. aureus e S. mutans. Uma redução significativa na contagem de S. aureus e S. mutans (Kruskal- Wallis e Dunn; p=0,001) para o grupo contendo 10% de PTBAEMA foi observada quando comparada aos valores encontrados nos respectivos grupos controle. Para C. albicans não foi encontrada diferença significante entre grupos contendo PTBAEMA e o grupo controle (ANOVA; p>0,05). Conclui-se que os RRCS contendo 10% e 25% de PTBAEMA inibiram a formação de biofilme de S. aureus e S. mutans. Entretanto não teve efeito significante na formação de biofilme de C. albicans

This study evaluated the antimicrobial activity of the resilient reliner Coe Soft ® (RRCS) combined with antimicrobial polymer poly (2-tert butylaminoethyl) methacrylate (PTBAEMA) on Staphylococcus aureus, Streptococcus mutans and Candida albicans biofilm formation. RRCS circular specimens were prepared (n=27), sterilized, divided into three groups according to PTBAEMA concentrations of 0% (control), 10% and 25% and inoculated into individual falcon tubes containing 5 mL of RPMI broth for fungi, TSB for S. aureus and BHI for S. mutans and kept overnight at 37°C with orbital shaking incubator at 75rpm, and S. mutans in microaerophilic. The specimens' inoculations were followed by biofilm formation and its maturation at 37°C under orbital shaking at 75rpm. After that, each sample was transferred to tubes containing PBS and serial dilutions were performed. Aliquots of these dilutions were plated in Petri dishes and incubated at 37°C for 48h. The data were transformed into log (CFU +1)/mL, considering α = 0.05. The results showed that the group containing 25% of PTBAEMA inhibited completely biofilm formation of S. aureus and S. mutans. A significant reduction in counts of S. aureus and S. mutans (Kruskal- Wallis and Dunn; p = 0.001) were found in group containing 10% of PTBAEMA when compared to the values in the corresponding control groups. C. albicans had no significant differences between groups containing PTBAEMA and the control group (ANOVA; p> 0.05). It is concluded that the RRCS containing 10% and 25% PTBAEMA inhibited the biofilm formation of S. aureus and S. mutans. However, no significant effect was found on C. albicans biofilm formation

Assessment of the mechanical properties of glass ionomer cements for orthodontic cementation

OBJECTIVE: To evaluate the mechanical properties of three glass ionomers cements (GICs) used for band cementation in Orthodontics. METHODS: Two conventional glass ionomers (Ketac Cem Easy mix/3M-ESPE and Meron/Voco) and one resin modified glass ionomer (Multi-cure Glass ionomer/3M-Unitek) were selected. For the compressive strength and diametral tensile strength tests, 12 specimens were made of each material. For the microhardness test 15 specimens were made of each material and for the shear bond strength tests 45 bovine permanent incisors were used mounted in a self-cure acrylic resin. Then, band segments with a welded bracket were cemented on the buccal surface of the crowns. For the mechanical tests of compressive and diametral tensile strength and shear bond strength a universal testing machine was used with a crosshead speed of 1,0 mm/min and for the Vickers microhardness analysis tests a Microdurometer was used with 200 g of load during 15 seconds. The results were submitted to statistical analysis through ANOVA complemented by Tukey's test at a significance level of 5%. RESULTS: The results shown that the Multi-Cure Glass Ionomer presented higher diametral tensile strength (p < 0.01) and compressive strength greater than conventional GICs (p = 0.08). Moreover, Ketac Cem showed significant less microhardness (p < 0.01). CONCLUSION: The resin-modified glass ionomer cement showed high mechanical properties, compared to the conventional glass ionomer cements, which had few differences between them.

OBJETIVO: avaliar as propriedades mecânicas de três cimentos de ionômero de vidro (CIVs) utilizados para cimentação de anéis ortodônticos. MÉTODOS: foram utilizados dois CIVs convencionais (Ketac Cem Easy mix/3M-ESPE e Meron/Voco) e um CIV modificado por resina (Multi-Cure Glass ionomer/3M-Unitek). Para os testes de resistência à compressão e tração diametral, foram confeccionados 12 corpos de prova de cada material. Para os testes de microdureza, foram confeccionados 15 corpos de prova de cada material; para os testes de resistência de união ao cisalhamento, foram utilizados 45 dentes bovinos incluídos em resina acrílica, sobre os quais foi cimentada uma lâmina de anel ortodôntico com braquete soldado a ela para a realização dos ensaios. Para os testes de compressão, tração diametral e cisalhamento, foi utilizada uma máquina universal de ensaios a uma velocidade de 1mm/min; para os testes de microdureza Vickers, foi utilizado um microdurômetro com 200g de carga durante 15 segundos. Os resultados foram submetidos à análise estatística ANOVA, complementada pelo teste de Tukey ao nível de significância de 5%. RESULTADOS: os resultados demonstraram que o Multi-Cure Glass Ionomer apresentou resistência à tração diametral significativamente maior (p < 0,01) e maior resistência à compressão (p = 0,08) em relação aos CIVs convencionais. Além disso, o Ketac Cem apresentou microdureza significativamente maior que os demais materiais (p < 0,01). CONCLUSÃO: o CIV modificado por resina apresentou propriedades mecânicas superiores às dos CIVs convencionais, que, por sua vez, apresentaram poucas diferenças entre si.

Análisis a través de microscopía electrónica de barrido de dos dientes con tratamiento endodóncico sometidos a altas temperaturas: estudio piloto / Scanning electron microscopy analysis of two endodontically treated teeth subjected to high temperatures: a pilot study

Introducción: el objetivo fue describir los cambios físico-químicos que ocurren en los tejidos y materiales dentales empleados en un tratamiento endodóncico convencional, al ser sometidos a altas temperaturas, a través de microscopía electrónica de barrido (MEB). Métodos: in vitro, se sometieron dos dientes premolares humanos a 200 y 400 ºC respectivamente, con el fin de estandarizar una técnica para la observación de los cambios físicos y químicos en los tejidos dentales (esmalte y dentina) y de los materiales de uso odontológico empleados comúnmente en endodoncia (gutapercha y cemento endodóncico a base de resina epóxica). Resultados: tanto los tejidos como los materiales dentales observados en este estudio piloto, presentaron gran resistencia a las altas temperaturas sin variar considerablemente su macroestructura, de tal manera que los cambios físicos (estabilidad dimensional, fisuras, grietas, fracturas, textura, carbonización) y químicos (elementos químicos constituyentes) pueden llegar a ser identificables y asociarse a cada rango de temperatura específico através del análisis MEB y espectrofotométrico. Conclusiones: los tejidos y los materiales dentales presentan gran resistencia a la acciónde altas temperaturas sin alterar su macroestructura de forma significativa. Del mismo modo, presentan cambios físicos y químicos que pueden contribuir con el proceso de identificación de un cadáver o restos humanos quemados, incinerados o carbonizados.

Introduction: the objective of this study was to describe the physicochemical changes occurring in dental tissues andmaterials used in a conventional endodontic treatment when subjected to high temperatures, by means of scanning electron microscopy(SEM) Methods: in vitro, two human premolar teeth were subjected to temperatures of 200°C and 400°C respectively, with the purpose ofstandardizing a technique for the observation of physical and chemical changes in dental tissues (enamel and dentin) and dental materialscommonly used in endodontic treatment (root canal gutta-percha and epoxy resin-based endodontic cement). Results: both the tissues and the dental materials analyzed in this pilot study presented great resistance to high temperatures without significantly changing their macrostructure; therefore, the physical changes (dimensional stability, cracks, crevices, fractures, texture, carbonization) and the chemical ones (constituent chemical elements) may turn out to be identifiable and associated with each specific temperature range by means of SEM and spectrophotometric analysis. Conclusions: dental tissues and materials display great resistance to the action of high temperatures, without significantly altering their macrostructure. Similarly, they experience physical and chemical changes that may contribute to theprocess of identification of a corpse or human remains that have been burned, incinerated or charred.