Transcutaneous Delivery of Dexamethasone Sodium Phosphate Via Microneedle-Assisted Iontophoretic Enhancement - A Potential Therapeutic Option for Inflammatory Disorders.

AIM: This study aimed to fabricate dexamethasone sodium phosphate loaded microneedle arrays (MNA) and investigate their efficiency in combination with iontophoresis for the treatment of hind paw oedema in rats. METHODS: Drug loaded polyvinyl alcohol, polyvinyl pyrrolidone and D-sorbitol-based MNA11 were fabricated by vacuum micromolding. Physicochemical, morphological, thermal, in-silico, in-vitro insertion ability (on parafilm) and drug release studies were performed. Ex-vivo permeation, in-vivo insertion and anti-inflammatory studies were performed in combination with iontophoresis. RESULTS: MNA11 displayed sharp-tipped projections and acceptable physicochemical features. Differential scanning calorimetry results indicated that drug loaded MNA11 were amorphous solids. Drug interacted with PVP and PVA predominately via hydrogen bonding. Parafilm displayed conspicuously engraved complementary structure of MNA11. Within 60 min, 91.50 ± 3.1% drug released from MNA11. A significantly higher i.e., 95.06 ± 2.5% permeation of drug was observed rapidly (within 60 min) from MNA11-iontophoresis combination than MNA11 i.e., 84.07 ± 3.5% within 240 min. Rat skin treated using MNA11 and MNA11-iontophoresis showed disruptions / microchannels in the epidermis without any damage to underlying anatomical structures. MNA11-iontophoresis combination led to significant reduction (83.02 ± 3.9%) in paw oedema as compared to MNA11 alone (72.55 ± 4.1%). CONCLUSION: MNA11-iontophoresis combination can act as a promising candidate to deliver drugs transcutaneously for treating inflammatory diseases.

Improving corneal permeability of dexamethasone using penetration enhancing agents: First step towards achieving topical drug delivery to the retina.

With an ever-increasing burden of vision loss caused by diseases of the posterior ocular segment, there is an unmet clinical need for non-invasive treatment strategies. Topical drug application using eye drops suffers from low to negligible bioavailability to the posterior segment as a result of static and dynamic defensive ocular barriers to penetration, while invasive delivery systems are expensive to administer and suffer potentially severe complications. As the cornea is the main anatomical barrier to uptake of topically applied drugs from the ocular surface, we present an approach to increase corneal permeability of a corticosteroid, dexamethasone sodium-phosphate (DSP), using a novel penetration enhancing agent (PEA). We synthesised a novel polyacetylene (pAc) polymer and compared its activity to two previously described cell penetrating peptide (CPP) based PEAs, TAT and penetratin, with respect to increasing transcorneal permeability of DSP in a rapid ex-vivo porcine corneal assay over 60 min. The transcorneal apparent permeability coefficients (Papp) for diffusion of pAc, and fluorescein isothiocyanate (FITC) conjugated TAT and penetratin were up to 5 times higher (p < 0.001), when compared to controls. When pAc was used in formulation with DSP, an almost 5-fold significant increase was observed in Papp of DSP across the cornea (p = 0.0130), a significant 6-fold increase with TAT (p = 0.0377), and almost 7-fold mean increase with penetratin (p = 0.9540). Furthermore, we investigated whether the PEAs caused any irreversible damage to the barrier integrity of the corneal epithelium by measuring transepithelial electrical resistance (TEER) and immunostaining of tight junction proteins using zonula occludens-1 (ZO-1) and occludin antibodies. There was no damage or structural toxicity, and the barrier integrity was preserved after PEA application. Finally, an in-vitro cytotoxicity assessment of all PEAs in human retinal pigment epithelium cells (ARPE-19) demonstrated that all PEAs were very well-tolerated, with IC50 values of 64.79 mM for pAc and 1335.45 µM and 87.26 µM for TAT and penetratin, respectively. Our results suggest that this drug delivery technology could potentially be used to achieve a significantly higher intraocular therapeutic bioavailability after topical eye drop administration, than currently afforded.

Engineering a novel water-in-oil biocompatible microemulsion system for the ocular delivery of dexamethasone sodium phosphate in the treatment of acute uveitis.

Due to their unique characteristics, microemulsions (ME) represent one of the most promising delivery systems which can conquer poor ocular drug bioavailability providing long residence time. Development of a ME system, relying on the use of a safe and non-irritant surfactant combination derived from sustainable resources and which can consolidate the small ME droplets, is the goal of this work. Herein, we report the design and characterization of a novel biocompatible, eco-friendly ME system loaded with the hydrophilic dexamethasone sodium phosphate (DEXP) using a novel surfactant mixture composed of D-α-tocopherol polyethylene glycol succinate (TPGS) and Plantacare® (coco-Glycosides). Capryol™ PGMC and double-distilled water were used as the respective oil and aqueous phases and the MEs were prepared by the water titration method, suitable for scaling up. Optimization of ME formulae was conducted by varying Plantacare® grades, TPGS to Plantacare® mass ratios and drug loading. The formulae were characterized in terms of physical appearance, droplet size (PS), size distribution (PDI), zeta potential (ZP), and stability. The optimized DEXP-loaded ME formula attained acceptable PS, PDI, and ZP values of 43 ± 5 nm, 0.35 ± 0.07, -12 ± 4 mV, respectively. TEM images confirmed a small PS ≤ 100 nm. The in vivo safety of ME was proved by the Draize test. The ME formula prompted excellent mucoadhesion and transcorneal permeation. The confocal studies showed deep penetration into the rabbits' corneas. In vivo studies using endotoxin-induced uveitis showed high ocular efficacy and a significant reduction in inflammatory cells, including interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α). The obtained results elect the novel engineered ME system as a promising tool for the ocular delivery of hydrophilic moieties in the management of various ophthalmic diseases.

Efficacy of Dexamethasone Diluted Saline Irrigant on Postoperative Sequelae in Patients Undergoing Lower Third Molar Surgery: A Prospective Clinical Study.

Background Third molar impaction surgery is one of the most common yet challenging procedures done as a part of minor oral surgery. Years of research and improvisation of techniques have been done, yet there are still a lot of postoperative sequelae after surgical removal of the impacted tooth. In our study, we have compared the efficacy of dexamethasone diluted saline solution over plain saline solution used as an irrigant in the reduction of postoperative sequelae for lower third molar surgery. Aim The aim of the study was to evaluate the efficacy of dexamethasone diluted saline solution over plain saline solution in the reduction of postoperative sequelae for lower third molar surgery. Materials and methods The research was conducted at Saveetha Dental College and Hospital in the Department of Oral and Maxillofacial Surgery. The study consisted of 48 individuals, 24 of whom had dexamethasone saline as an irrigant (8 mg of dexamethasone was diluted in 100 ml of plain saline) (Group 1), and 24 in whom plain saline was used as an irrigant (Group 2) in the lower third molar surgery. Patients were evaluated postoperatively for pain and swelling. The postoperative swelling was measured on postoperative day two and day seven. Postoperative pain was measured on day two, day four, and day seven after surgery using a visual analog scale. Data were analyzed using SPSS (IBM Corp., Armonk, NY) with P-values less than 0.05 considered statistically significant. The statistical test used to compare the outcomes between the two groups was the independent samples t-test. Results It was found that study participants in the dexamethasone saline irrigation group reported statistically significantly lesser pain than participants receiving plain saline irrigation on day two (P = 0.001), day four (P = 0.001), and day seven (P = 0.001), respectively. Also, there was a reduction in swelling among participants in the dexamethasone saline irrigation group when compared to the normal saline irrigation group, which was statistically significant (P = 0.001) on day two, while the postoperative swelling was not statistically significant on day seven (P = 0.08) between the two study groups. Conclusion Based on the results obtained, it can be concluded that dexamethasone saline solution (8 mg/100 mL) was more effective as an irrigant in reducing the postoperative sequelae than regular saline solution in the lower third molar surgery.

Interpenetrating Polymer Networks of Poly(2-hydroxyethyl methacrylate) and Poly(N, N-dimethylacrylamide) as Potential Systems for Dermal Delivery of Dexamethasone Phosphate.

In this study, a series of novel poly(2-hydroxyethyl methacrylate) (PHEMA)/poly(N,N'-dimethylacrylamide) (PDMAM) interpenetrating polymer networks (IPNs) were synthesized and studied as potential drug delivery systems of dexamethasone sodium phosphate (DXP) for dermal application. The IPN composition allows for control over its swelling ability as the incorporation of the highly hydrophilic PDMAM increases more than twice the IPN swelling ratio as compared to the PHEMA single networks, namely from ~0.5 to ~1.1. The increased swelling ratio of the IPNs results in an increased entrapment efficiency up to ~30% as well as an increased drug loading capacity of DXP up to 4.5%. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) show the formation of a solid dispersion between the drug DXP and the polymer (IPNs) matrix. Energy-dispersive X-ray (EDX) spectroscopy shows an even distribution of DXP within the IPN structure. The DXP release follows Fickian diffusion with ~70% of DXP released in 24 h. This study demonstrates the potential of the newly developed IPNs for the dermal delivery of DXP.

Conceptualization and Investigation of Multicomponent Polymer Networks as Prospective Corticosteroid Carriers.

Dexamethasone (DXM) is a highly potent and long-acting synthetic glucocorticoid with anti-inflammatory, anti-allergic, and immunosuppressive effects. However, the systemic application of DXM can cause undesirable side effects: sleep disorders, nervousness, heart rhythm disorders, heart attack, and others. In the present study, multicomponent polymer networks were developed as potential new platforms for the dermal application of dexamethasone sodium phosphate (DSP). First, a copolymer network (CPN) comprising hydrophilic segments of different chemical structures was synthesized by applying redox polymerization of dimethyl acrylamide onto poly(ethylene glycol) in the presence of poly(ethylene glycol) diacrylate (PEGDA) as a crosslinker. On this basis, an interpenetrating polymer network structure (IPN) was obtained by introducing a second network of PEGDA-crosslinked poly(N-isopropylacrylamide). Multicomponent networks obtained were characterized by FTIR, TGA, and swelling kinetics in different solvents. Both CPN and IPN showed a high swelling degree in aqueous media (up to 1800 and 1200%, respectively), reaching the equilibrium swelling within 24 h. Additionally, IPN showed temperature-responsive swelling in an aqueous solution as the equilibrium swelling degree decreased considerably with an increase in the temperature. In order to evaluate the networks' potential as drug carriers, swelling in DSP aqueous solutions of varied concentration was investigated. It was established that the amount of encapsulated DSP could be easily controlled by the concentration of drug aqueous solution. In vitro DSP release was studied in buffer solution (BS) with pH 7.4 at 37 °C. The results obtained during DSP loading and release experiments proved the feasibility of the developed multicomponent hydrophilic polymer networks as effective platforms for potential dermal application.

Simultaneous Determination of Moxifloxacin Hydrochloride and Dexamethasone Sodium Phosphate in Rabbit Ocular Tissues and Plasma by LC-MS/MS: Application for Pharmacokinetics Studies.

Treatment of ocular infection involves pharmacotherapy with steroids and antibiotic drops, such as moxifloxacin hydrochloride (MFH) and dexamethasone sodium phosphate (DSP). To characterize the pharmacokinetics of these two compounds, we performed and validated a liquid chromatography-mass spectrometry (LC-MS/MS) method to quantify them in rabbit ocular tissues and plasma. We used protein precipitation to extract the compounds. The analyte and internal standard (IS) were separated using a Shim-pack Scepter C18 column. The mobile phase was composed of 0.1% formic acid water (A) and methanol (B). MFH and DSP were detected using positive ion electrostatic ionization (ESI) in multiple reaction monitoring mode (MRM). The calibration curves for both compounds showed good linearity over concentrations ranging from 0.5 to 200 ng/mL in rabbit ocular tissues and plasma. The lower limit of quantification for both MFH and DSP was 0.5 ng/mL. We validated this method for selectivity, linearity (r2 > 0.99), precision, accuracy, matrix effects, and stability. Thus, we used this method to assess the pharmacokinetic (PK) characteristics of MFH and DSP in rabbit ocular tissues and plasma after single doses. Our results indicate that this method can be used for the simultaneous analysis of moxifloxacin hydrochloride and dexamethasone sodium phosphate in clinical samples.

ZIF-8 nanoparticles coated with macrophage-derived microvesicles for sustained, targeted delivery of dexamethasone to arthritic joints.

Dexamethasone sodium phosphate (Dex) is widely used in the clinic for the treatment of rheumatoid arthritis. However, it circulates in the blood for a short time and it is linked to a high risk of severe side effects caused by repeated dosing. Here, we encapsulated Dex onto zeolitic imidazolate framework-8 (ZIF-8) to prepare metal-organic framework nanoparticles with high drug loading efficiency. To prevent clearance by the mononuclear phagocyte system and extend time in circulation, the nanoparticles were also camouflaged with macrophage-derived microvesicles (MV) to obtain the biomimetic drug delivery system MV/Dex/ZIF-8. In vitro and in vivo experiments showed that the nanosystem had high drug loading and encapsulation efficiency, high stability, and long circulation time, and it permitted sustained drug release longer in inflamed joint tissues. Our study provides new insights into designing camouflaged drug carriers to prevent their phagocytosis and prolong their time in circulation.

Advanced application of stimuli-responsive drug delivery system for inflammatory arthritis treatment.

Inflammatory arthritis is a major cause of disability in the elderly. This condition causes joint pain, loss of function, and deterioration of quality of life, mainly due to osteoarthritis (OA) and rheumatoid arthritis (RA). Currently, available treatment options for inflammatory arthritis include anti-inflammatory medications administered via oral, topical, or intra-articular routes, surgery, and physical rehabilitation. Novel alternative approaches to managing inflammatory arthritis, so far, remain the grand challenge owing to catastrophic financial burden and insignificant therapeutic benefit. In the view of non-targeted systemic cytotoxicity and limited bioavailability of drug therapies, a major concern is to establish stimuli-responsive drug delivery systems using nanomaterials with on-off switching potential for biomedical applications. This review summarizes the advanced applications of triggerable nanomaterials dependent on various internal stimuli (including reduction-oxidation (redox), pH, and enzymes) and external stimuli (including temperature, ultrasound (US), magnetic, photo, voltage, and mechanical friction). The review also explores the progress and challenges with the use of stimuli-responsive nanomaterials to manage inflammatory arthritis based on pathological changes, including cartilage degeneration, synovitis, and subchondral bone destruction. Exposure to appropriate stimuli induced by such histopathological alterations can trigger the release of therapeutic medications, imperative in the joint-targeted treatment of inflammatory arthritis.

Trilayer microneedle array assisted transdermal and intradermal delivery of dexamethasone.

Dexamethasone is a synthesised glucocorticoid that is widely used in the treatment of various inflammatory skin conditions. Novel trilayer dissolving microneedle arrays were manufactured to assist dexamethasone delivery via the skin. Both transdermal delivery and intradermal delivery of dexamethasone can be achieved this way. Additionally, we proposed a novel strategy of co-formulating dexamethasone and its pro-drug dexamethasone sodium phosphate into the same dissolving microneedle array, with a view to achieving a fast onset of action and also sustained treatment. Here, a 3D-printing technique was employed, for the first time, to fabricate a baseplate for these microneedle arrays. The 3D-printed baseplates provided strong support to aid the insertion of the drug-encapsulated tips. A simple and rapid HPLC method was developed, and validated, to separate and quantify dexamethasone and dexamethasone sodium phosphate in the same sample. Ex-vivo studies found that these trilayer dissolving microneedle arrays could achieve a delivery efficiency of over 40% in intradermal delivery and over 50% in transdermal delivery. Trilayer microneedle-assisted delivery of this glucocorticoid provided a promising alternative to oral and parenteral routes of dexamethasone administration.

A comparative physicochemical and pharmacological evaluation of dexamethasone sodium phosphate and betamethasone sodium phosphate mucoadhesive gels for the treatment of oral submucous fibrosis in rats

Abstract The present study is aimed to formulate steroidal oral mucoadhesive gels of dexamethasone sodium phosphate and betamethasone sodium phosphate. Six gel formulations each of dexamethasone sodium phosphate and betamethasone sodium phosphate prepared using two different polymers carboxymethyl cellulose sodium and hydroxypropyl methylcellulose, in variable proportions. All the formulations subjected for assessment of various physicochemical parameters and mechanical properties. The formulations BSP5 and DSP5, both containing 1.25 % carboxymethyl cellulose sodium, 1.25 % hydroxypropyl methylcellulose, exhibiting mucoadhesive strength of 12.300 ± 0.004 and 12.600 ± 0.01, adhesiveness of 28.04 ± 00 and 30.02 ± 00, cohesiveness of 28.04 ± 00 and 30.02 ± 00, drug release of 86.869 ± 0.380 % and 88.473 ± 0.457 % respectively were considered as promising ones and were further subjected for stability studies and in vivo study in male albino rats. Formulation DSP5 upon oral application for 4 months in arecoline induced oral submucous fibrosis rats, showed more than 80 % reduction in fibrosis as compared with BSP5 which showed nearly 50 % reduction. These results were concluded on the basis of histopathological profile and weight gain among the experimental animals during in vivo study. Hence, DSP5 by minimizing the painful injuries and morbidities justifies being suitable noninvasive model for OSMF treatment.

Quantitative determination of dexamethasone sodium phosphate in bulk and pharmaceuticals at suitable pH values using the spectrophotometric method.

Dexamethasone sodium phosphate (DSP) is an ester of dexamethasone with anti-inflammatory action. This study provides new insights to develop a simple, precise, and accurate spectrophotometric method for the quantitative determination of DSP in bulk and pharmaceuticals. The method was validated before being applied to determine the DSP in six pharmaceutical injection forms from different companies. DSP is soluble in phosphate buffer, so it was used as a solvent, and a pH of 6 was found to be suitable for determination purposes. The DSP solution was scanned in the ultraviolet range (200-400 nm) using a double-beam spectrophotometer with a 1-cm quartz cell. The wavelength (λ max) of DSP was set at 242.5 nm, following the Beer-Lambert law for concentrations from 2 to 50 µg/ml. Dexa AIWA (Germany) showed the best results, being very close to the bulk value with no significant variation. Similarly, Dexamed (Cyprus) and HEMAZON (Syria) showed no significant differences from the bulk; however, the three remaining injections, DEXAKAL (India), DEXABRU (India), and DEXARON (China), showed significant variations from the bulk. Estimated limit of detection and limit of quantitation values for DSP were 0.83 and 2.5 µg/ml, respectively, with a regression coefficient of 0.999. Recovery studies were then used to determine the accuracy of the suggested method. The percentage of recovery was found to be 98.58%-102.52%. All results are suggesting a pivotal method for the routine analysis of DSP both in pure form and the commercially pharmaceutical forms.

Macrophage activation syndrome triggered by systemic lupus erythematosus flare: successful treatment with a combination of dexamethasone sodium phosphate, intravenous immunoglobulin, and cyclosporine: a case report.

BACKGROUND: Macrophage activation syndrome is classified as a secondary form of hemophagocytic lymphohistiocytosis. It is a hyperinflammatory complication observed to be comorbid with a variety of autoimmune diseases, including adult-onset Still's disease and systemic juvenile idiopathic arthritis. Macrophage activation syndrome is less commonly detected in adult patients with systemic lupus erythematosus, which, if untreated, can be fatal, though determining the optimum treatment strategy is still a challenge. CASE PRESENTATION: Herein, we report a case of macrophage activation syndrome in a 33-year-old Egyptian female as an unusual complication of a systemic lupus erythematosus flare in adult patients. Our patient was initially treated with a combination of intravenous methylprednisolone pulse therapy and intravenous immunoglobulin therapy, which was followed by a course of oral prednisolone and oral cyclosporine with little response. Switching from oral prednisone to intravenous dexamethasone sodium phosphate showed a more favorable clinical and biochemical response. CONCLUSION: Macrophage activation syndrome is less commonly detected in adult patients with systemic lupus erythematosus. Our case demonstrates that dexamethasone sodium phosphate can be a successful alternative treatment for patients with systemic lupus erythematosus complicated by macrophage activation syndrome in whom the response to pulse methylprednisolone was inadequate to manage their illness, proving to be remarkably effective in a relatively short time frame.

A Dry Powder Platform for Nose-to-Brain Delivery of Dexamethasone: Formulation Development and Nasal Deposition Studies.

Nasal route of administration offers a unique opportunity of brain targeted drug delivery via olfactory and trigeminal pathway, providing effective CNS concentrations at lower doses and lower risk for adverse reactions compared to systemic drug administration. Therefore, it has been recently proposed as a route of choice for glucocorticoids to control neuroinflammation processes in patients with severe Covid-19. However, appropriate delivery systems tailored to enhance their efficacy yet need to emerge. In this work we present the development of sprayable brain targeting powder delivery platform of dexamethasone sodium phosphate (DSP). DSP-loaded microspheres, optimised employing Quality-by-Design approach, were blended with soluble inert carriers (mannitol or lactose monohydrate). Powder blends were characterized in terms of homogeneity, flow properties, sprayability, in vitro biocompatibility, permeability and mucoadhesion. Nasal deposition studies were performed using 3D printed nasal cavity model. Mannitol provided better powder blend flow properties compared to lactose. Microspheres blended with mannitol retained or enlarged their mucoadhesive properties and enhanced DSP permeability across epithelial model barrier. DSP dose fraction deposited in the olfactory region reached 17.0% revealing the potential of developed powder platform for targeted olfactory delivery. The observed impact of nasal cavity asymmetry highlighted the importance of individual approach when aiming olfactory region.

Silk fibroin hydrogel/dexamethasone sodium phosphate loaded chitosan nanoparticles as a potential drug delivery system.

The application of nanoparticles-loaded hydrogel as a novel formulation has gotten much attention for a potential drug delivery method for desire drug controlling and targeting. This study prepared a sustained release formulation using dexamethasone sodium phosphate-loaded chitosan nanoparticles embedded in silk fibroin hydrogel. Dexamethasone sodium phosphate-loaded chitosan nanoparticles (DEX-CSNPs) was developed using the ionotropic-gelation technique and inserted in the silk fibroin hydrogel (SFH). Mean particle size, polydispersity index (PDI), and zeta potential of DEX-CSNPs were 488.05±38.69 nm, 0.15±0.07, 32.12±2.42 mV, respectively. The encapsulation efficiency (EE), drug loading capacity (LC), and the cumulative amount of released drug of DEX-loaded CSNPs, which detected in phosphate buffer saline (PBS) solution, were 67.6±6.7%, 15.7±5.7%, and 75.84%, respectively. The DEX-CSNPs were then mixed with silk fibroin (SF) solution and induced gelation by sonication to prepare a drug-releasing system. As a result, the scanning electron microscopy (SEM) image shows that the prepared drug delivery system had a properly interconnected porous structure. Smaller pore size, greater porosity, higher water uptake, and swelling ratio were achieved by incorporating CSNPs and DEX-loaded CSNPs. The cytotoxicity study was performed for the L929 fibroblast cell line. The drug release kinetics study was performed on a prepared drug delivery system. Finally, the release test results showed a suitable extended-release of DEX from the carrier over 16 days. Overall, the developed drug-releasing system can be a promising candidate for drug delivery applications.

Rapid and simultaneous determination of dexamethasone and dexamethasone sodium phosphate using HPLC-UV: Application in microneedle-assisted skin permeation and deposition studies.

Dexamethasone is a fluorinated derivative of the natural glucocorticoid, cortisone, with a very high systemic anti-inflammatory effect. In this study, a simple and rapid high performance liquid chromatography (HPLC) method was developed and validated to quantify dexamethasone and its prodrug dexamethasone sodium phosphate in skin permeation studies. The separation of both the compounds was achieved on a Vydac Denali C18 column(250 × 4.6 mm, 5 µm) with a mobile phase composed of 5 mM ammonium acetate buffer-acetonitrile-methanol (43:32:25, v/v) at a flow rate of 0.9 mL/min and UV detection at 240 nm. The standard curves were found to be linear in the range from 0.5 to 100 µg/mL for both the drugs and the method could successfully separate the drug peaks from interfering peaks of endogenous skin constituents. Accuracy values of both the drugs were within 98.60 to 108.60% (intra-day) and 98.70 to 107.20% (inter-day) and precision values were within 2% at the studied concentrations. The developed method was used to investigate the effect of microneedles on transdermal delivery of dexamethasone sodium phosphate. The hydrolysis of dexamethasone sodium phosphate to dexamethasone in the presence of rat skin homogenate and rat plasma was also evaluated to confirm the conversion that occurs during skin permeation and in the blood circulation. The skin permeation and deposition characteristics of microneedle-assisted diffusion were compared to those achieved by passive diffusion. The observed data demonstrated that transdermal permeation of dexamethasone is significantly enhanced with microneedle pretreatment of rat skin, showing a marked increase in flux and permeability coefficient, compared to passive diffusion. This simple isocratic HPLC method can, be effectively applied for the evaluation of skin permeation of topical/transdermal dexamethasone formulations.

Dexamethasone Sodium Phosphate Loaded Modified Cyclodextrin Based Nanoparticles: An Efficient Treatment for Rheumatoid Arthritis.

The main aim of the current research was to develop a modified cyclodextrin based nanoparticulate drug delivery system to deliver dexamethasone sodium phosphate (DSP) for the treatment of rheumatoid arthritis (RA). DSP is a glucocorticoid (GC), and its limited application in RA therapy due to poor pharmacokinetics and its severe associated side effects. DSP loaded hydrophobically modified cyclodextrin based nanoparticles (DSP-NPs) prepared by a double emulsion solvent evaporation method. The nanoparticle size was <120 nm, good entrapment efficiency and excellent stability were obtained. TEM study showed that nanoparticles were perfectly spherical shape. The in-vitro drug release from nanoparticle follows the non-Fickian diffusion mechanism. The pharmacokinetic profile of DSP after encapsulation showing the 2.3-fold increase in AUC and extended mean residence time, which increases the chances of nanoparticles to extravasate into the site of inflammation by the EPR effect. The pharmacodynamic studies in the Adjuvant-induced Arthritis (AIA) rat model showing a significant reduction in arthritic score, paw thickness, and inflammatory cytokine level in serum. Adverse effects evaluation studies demonstrate a significant reduction in the associated undesirable effects on body weight, blood glucose level, renal impairment, and hematological abnormalities compared to marketed formulation. These results suggest that DSP-NPs can be used as an efficient therapy for RA.

Exosome-based biomimetic nanoparticles targeted to inflamed joints for enhanced treatment of rheumatoid arthritis.

BACKGROUND: Glucocorticoids (GCs) show powerful treatment effect on rheumatoid arthritis (RA). However, the clinical application is limited by their nonspecific distribution after systemic administration, serious adverse reactions during long-term administration. To achieve better treatment, reduce side effect, we here established a biomimetic exosome (Exo) encapsulating dexamethasone sodium phosphate (Dex) nanoparticle (Exo/Dex), whose surface was modified with folic acid (FA)-polyethylene glycol (PEG)-cholesterol (Chol) compound to attain FPC-Exo/Dex active targeting drug delivery system. RESULTS: The size of FPC-Exo/Dex was 128.43 ± 16.27 nm, with a polydispersity index (PDI) of 0.36 ± 0.05, and the Zeta potential was - 22.73 ± 0.91 mV. The encapsulation efficiency (EE) of the preparation was 10.26 ± 0.73%, with drug loading efficiency (DLE) of 18.81 ± 2.05%. In vitro study showed this system displayed enhanced endocytosis and excellent anti-inflammation effect against RAW264.7 cells by suppressing pro-inflammatory cytokines and increasing anti-inflammatory cytokine. Further biodistribution study showed the fluorescence intensity of FPC-Exo/Dex was stronger than other Dex formulations in joints, suggesting its enhanced accumulation to inflammation sites. In vivo biodistribution experiment displayed FPC-Exo/Dex could preserve the bone and cartilage of CIA mice better and significantly reduce inflamed joints. Next in vivo safety evaluation demonstrated this biomimetic drug delivery system had no obvious hepatotoxicity and exhibited desirable biocompatibility. CONCLUSION: The present study provides a promising strategy for using exosome as nanocarrier to enhance the therapeutic effect of GCs against RA.

Chitosan Derivatives with Mucoadhesive and Antimicrobial Properties for Simultaneous Nanoencapsulation and Extended Ocular Release Formulations of Dexamethasone and Chloramphenicol Drugs.

The aim of this work was to evaluate the effectiveness of neat chitosan (CS) and its derivatives with 2-acrylamido-2-methyl-1-propanesulfonic acid (AAMPS) and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (MEDSP) as appropriate nanocarriers for the simultaneous ocular administration of dexamethasone sodium phosphate (DxP) and chloramphenicol (CHL). The derivatives CS-AAMPS and CS-MEDSP have been synthesized by free-radical polymerization and their structure has been proved by Fourier-Transformed Infrared Spectroscopy (FT-IR) spectroscopy. Both derivatives exhibited low cytotoxicity, enhanced mucoadhesive properties and antimicrobial activity against Staphylococcus aureus (S.aureus) and Escherichia coli (E. coli). Encapsulation was performed via ionic crosslinking gelation using sodium tripolyphosphate (TPP) as the crosslinking agent. Dynamic light scattering measurements (DLS) showed that the prepared nanoparticles had bimodal distribution and sizes ranging from 50-200 nm and 300-800 nm. Drugs were encapsulated in their crystalline (CHL) or amorphous (DexSP) form inside nanoparticles and their release rate was dependent on the used polymer. The CHL dissolution rate was substantially enhanced compared to the neat drug and the release time was extended up to 7 days. The release rate of DexSP was much faster than that of CHL and was prolonged up to 3 days. Drug release modeling unveiled that diffusion is the main release mechanism for both drugs. Both prepared derivatives and their drug-loaded nanoparticles could be used for extended and simultaneous ocular release formulations of DexSP and CHL drugs.

Solid Dosage Forms of Dexamethasone Sodium Phosphate Intended for Pediatric Use: Formulation and Stability Studies.

Undesirable taste has always been a key issue for oral dosage forms. The aim of the present study was to co-formulate dexamethasone sodium phosphate (DSP), in common pediatric oral forms, using sweet preserves and/or different types of chocolate as excipients. An array of different kinds of chocolate were co-formulated with DSP and were further characterized by means of dynamic light scattering (DLS), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and Fourier-transform infrared (FT-IR) spectroscopy. For the assay of active pharmaceutical ingredient (API), the chocolate samples were pre-treated by means of liquid extraction and analyzed using an high-performance liquid chromatographic (HPLC) method with a strong anion exchange column and a phosphate buffer (17 mM, pH = 3)/acetonitrile, 50:50 v/v as mobile phase. The developed chromatographic method was validated based on the International Conference on Harmonization (ICH) guidelines (%Mean Recovery = 99.4% and %Relative Standard Deviation, RSD = 0.43%). Furthermore, dissolution and in vitro digestion tests of chocolate formulations were evaluated. The DSP was found to be stable for at least 1 year in prepared preparations.