High-Density Dermal Matrix for Soft Tissue Augmentation Using a Matrix Tissue Graph Technique-A Comprehensive Multicenter Analysis of 20 Implants: A 1-Year Follow-Up Retrospective Study.

Background: In this multicenter case series analysis, the authors present successful instances of 20 single-screw-retained and implant-supported prosthetic rehabilitation samples. Methods: A high-density heterologous dermal matrix (Derma® Osteobiol by Tecnoss, Torino, Italy) was employed with a specific technique named the matrix tissue graft (MTG) in all these cases characterized by an inadequate initial supra-crestal tissue height (thin if 1 mm or medium if 2 mm) to enhance the peri-implant soft tissues both vertically and horizontally. Results: The implants were deemed successful in all cases, yielding a success proportion of 100% (one-sided 97.5% confidence interval = 83.2-100%). The buccal and lingual gains were, respectively, 2.2 ± 0.38 mm (range 1.7-3.22 mm) and 0.83 ± 0.33 mm (range 0.1-1.5 mm). These measurements were calculated as the maximum distance between two superimposed .stl file models (derived from two different IOS devices) scanned before implant placement and 1 year after dermal matrix healing. Conclusions: An outstanding vertical and horizontal gain was obtained using this heterologous derma matrix placed above the bone crest and surrounding the dental implants.

Investigating the Role of SNAI1 and ZEB1 Expression in Prostate Cancer Progression and Immune Modulation of the Tumor Microenvironment.

Prostate cancer (PCa) is an immunologically cold tumor and the molecular processes that underlie this behavior are poorly understood. In this study, we investigated a primary cohort of intermediate-risk PCa (n = 51) using two NanoString profiling panels designed to study cancer progression and immune response. We identified differentially expressed genes (DEGs) and pathways associated with biochemical recurrence (BCR) and clinical risk. Confirmatory analysis was performed using the TCGA-PRAD cohort. Noteworthy DEGs included collagens such as COL1A1, COL1A2, and COL3A1. Changes in the distribution of collagens may influence the immune activity in the tumor microenvironment (TME). In addition, immune-related DEGs such as THY1, IRF5, and HLA-DRA were also identified. Enrichment analysis highlighted pathways such as those associated with angiogenesis, TGF-beta, UV response, and EMT. Among the 39 significant DEGs, 11 (28%) were identified as EMT target genes for ZEB1 using the Harmonizome database. Elevated ZEB1 expression correlated with reduced BCR risk. Immune landscape analysis revealed that ZEB1 was associated with increased immunosuppressive cell types in the TME, such as naïve B cells and M2 macrophages. Increased expression of both ZEB1 and SNAI1 was associated with elevated immune checkpoint expression. In the future, modulation of EMT could be beneficial for overcoming immunotherapy resistance in a cold tumor, such as PCa.

Computer-Aided Design/Computer-Aided Manufacturing of Customized Abutment for Rehabilitating a Malpositioned Implant Using Digital Flow: A Case Report.

This study presented a rehabilitation option for malpositioned implants; this involved obtaining their position and inclination through intraoral scanning, and producing a customized abutment with CAD/CAM technology. The patient in this case report presented a root fracture in tooth 21 and was subjected to extraction, implant installation, and immediate provisional prosthesis. The implant was installed with a distal inclination due to anatomical limitations. After osseointegration, an intraoral scanning transfer provided a digital model (file extension .stl), which reproduced the implant's position and inclination. Then, the file was sent so that a customized abutment (CAD/CAM) could be manufactured, promoting the final rehabilitation of the case; this allowed for good hygiene, load distribution in the dynamic interocclusal relationship, and favorable esthetics, whereas many would otherwise recommend implant removal. The result presented lower costs, a shorter time frame, and a lower morbidity for the patient.

Intraoral scanners in children: evaluation of the patient perception, reliability and reproducibility, and chairside time-A systematic review.

Purpose: The aim of this systematic review is to evaluate the perception of the patient, the chairside time, and the reliability and/or reproducibility of intraoral scanners for full arch in pediatric patients. Methods: A data search was performed in four databases (Medline-Pubmed, Scopus, ProQuest and Web of Science) in accordance with the PRISMA 2020 statements. Studies were classified in three categories (patient perception, scanning or impression time and reliability and/or reproducibility). The resources, the data extraction and the quality assessment were carried out independently by two operators. The variables recorded were population characteristics, material and methods aspects and included country, study design and main conclusion. A quality assessment of the selected studies was performed with QUADAS-2 tool, and Kappa-Cohen Index was calculated to analyze examiner agreement. Results: The initial search obtained 681 publications, and finally four studies matching inclusion criteria were selected. The distribution of the studies in the categories was three for the analysis of the patient's perception and scanning or impression time; and two items to assess the reliability and/or reproducibility of intraoral scans. All included studies have a repeated measures-transversal design. The sample size ranged between 26 and 59 children with a mean age. The intraoral scanners evaluated were Lava C.O.S, Cerec Omnicam, TRIOS Classic, TRIOS 3-Cart and TRIOS Ortho. The quality assessment of the studies using QUADAS-2 tool revealed a low risk of bias while evaluating patient perception, but an unclear risk of bias in the analysis of accuracy or chairside time. In relation to the applicability concerns, the patient selection was of high risk of bias. All studies agreed that the patient perception and comfort is better with intraoral scanners in comparison with the conventional method. The accuracy or reliability of the digital procedure is not clear, being clinically acceptable. In relation with the chairside time, it depends on the intraoral scanner, with contradictory data in the different analyzed studies. Conclusion: The use of intraoral scanners in children is a favorable option, finding a significantly higher patient perception and comfort with intraoral scanners compared to the conventional impression method. The evidence for reliability or reproducibility is not strong to date, however, the differences between the intraoral measurements and the digital models would be clinically acceptable.

Custom Bone Regeneration (CBR): An Alternative Method of Bone Augmentation-A Case Series Study.

We performed this clinical study in order to evaluate the reliability of the Guided Bone Regeneration (GBR) surgical technique through the use of customized CAD CAM titanium meshes (Yxoss CBR® Reoss) in order to show an alternative method of bone augmentation. MATERIALS AND METHODS: Nine patients presenting 10 bone defects were referred to solve oral dysfunction due to edentulous atrophic ridges. Guided bone regeneration was performed with titanium meshes combined with autogenous bone grafting and heterologous bovine bone mineral grafting, and exclusively a "poncho technique" soft tissue approach for all the cases. After a mean 9 months of graft healing (range 6-12 months), titanium meshes were removed, and implant surgery was subsequently performed. The results we obtained were positive in terms of volumetric increases in height, length and thickness of the atrophic ridges without biological complications detectable before implant surgery. RESULTS: Out of nine, one site met titanium mesh exposure: however, in all 10 sites a three-dimensional volumetric bone implementation was obtained. The statistical results were estimated by uploading and superimposing cbct scans before and after CBR surgery for each patient, so it was possible evaluate the maximum linear vertical and horizontal bone gain through dedicated Cad Cam software (Exocad GmbH®). The average horizontal gain was 6.37 ± 2.17 mm (range 2.78-9.12 mm) and vertical gain was 5.95 ± 2.06 mm (range 2.68-9.02 mm). A total of 18 implants were placed into the grafted sites with a 100% survival rate (clearly they are relative percentages to be compared to the short time elapsed). CONCLUSIONS: The results we obtained in this study suggest that this CBR procedure (Yxoss® by Reoss) is reliable and safe for bone regeneration to allow implant-prosthetic restoration in horizontal, vertical and combined bone defects. The soft tissue management is diriment: all the cases were managed with a "poncho" flap approach to decrease exposure complication.

Comparison of Dental Surface Image Registration and Fiducial Marker Registration: An In Vivo Accuracy Study of Static Computer-Assisted Implant Surgery.

This study compared the accuracy of static computer-assisted implant surgery (sCAIS) planned through dental surface image registration and fiducial marker registration. Stone models of 30 patients were converted into digital dental casts by using a desktop scanner. Cone-beam computed tomography (CBCT) was performed and superimposed to the digital dental casts with two methods: matching the dental surface images or matching the fiducial markers on a stereolithographic radiographic template. Following the implant planning, stereolithographic surgical guides were fabricated, and 56 fully guided implants were inserted by the same doctor. Deviations between planned and inserted implants were measured and compared using postoperative CBCT images. After adjustment for other potential influencing factors, compared with the fiducial marker registration group, significantly larger mean lateral deviations were noted in the dental surface registration group at both the implant platform and apex (p = 0.0188 and 0.0371, respectively). However, the mean lateral deviations for the dental surface registration (0.83 ± 0.51 mm at implant platform and 1.24 ± 0.68 mm at implant apex) were comparable to the literature. In conclusion, our findings indicate that although sCAIS planned using dental surface image registration was not statistically as accurate as that using fiducial marker registration, its accuracy was satisfactory for clinical use.

A New Proposal: a Digital Flow for the Construction of a Haas-Inspired Rapid Maxillary Expander (HIRME).

Maxillary expansion is a common orthodontic treatment used for the correction of posterior crossbite resulting from reduced maxillary width. Transverse maxillomandibular discrepancies are a major cause of several malocclusions and may be corrected in different manners; in particular, the rapid maxillary expansion (RME) performed in the early mixed dentition has now become a routine procedure in orthodontic practice. The aim of this study is to propose a procedure that reduces the patient cooperation as well as the lab work required in preparing a customized Haas-inspired rapid maxillary expander (HIRME) that can be anchored to deciduous teeth and can be utilized in mixed dentition with tubes on the molars and hooks and brackets on the canines. This article thus presents an expander that is completely digitally developed, from the first moment of taking the impression with an optical scanner to the final solidification phase by the use of a 3D printer. This digital flow takes place in a CAD environment and it starts with the creation of the appliance on the optical impression; this design is then exported as an stl extension and is sent to the print service to obtain a solid model of the device through a laser sintering process. This "rough" device goes through a post-processing procedure; finally, a commercial expansion screw is laser-welded. This expander has all the advantages of a cast-metal Haas-type RME that rests on deciduous teeth; moreover, it has the characteristic of being developed with a completely digitized and individualized process, for the mouth of the young patient, as well as being made completely of cobalt-chrome, thus ensuring greater adaptability and stability in the patient's mouth.

Monolithic Zirconia FPD on Modified Titanium Bonding Bases in Limited Interocclusal Distance: A Case Report.

A 62-year-old male patient sought treatment for missing maxillary teeth. A diagnostic cast demonstrated that the interocclusal distance was insufficient. A 5-unit screw-retained implant-supported fixed partial denture (FPD) was used to restore missing maxillary teeth. The restoration of multiple missing teeth using an implant-supported FPD is challenging when the interocclusal distance is limited due to lack of retention and inadequate esthetics. In this case, a hexagonal, screw-retained, and subgingivally located titanium-based zirconia implant-supported FPD with a conical abutment base was used for restoration to overcome the limited interocclusal distance. This implant-supported FPD, consisting of CAD/CAM-designed monolithic zirconia cemented to a titanium bonding base in the laboratory, is expected to facilitate predictable retention and adequate esthetics as well as provide ease of retrieval.

O momento da impressão 3D na odontologia / The moment of 3D priting in dentistry

A era digital está acontecendo na odontologia. Cada vez mais empresas surgem com inovações no mundo digital, que antes só era dominado por grandes empresas, como Amanngirrbach, Zirkonzahn, Straumann e Holland, empresas as quais dominam o mercado de fresadoras odontológicas. Mas, com a prototipagem 3D das impressoras tudo isso mudou, empresas de menor porte têm a opção de trazer para o mercado máquinas que nos deixam com uma opção muito ágil na área odontológica. Trabalhos como provisórios, dentaduras e protocolos acrílicos podem ser impressos em tempo recorde, e a parte de fresagem de cera, que as fresadoras fazem, a impressora consegue entregar com maestria, com tempo e custo operacional inferior.(AU).

Digital age is happening in dentistry. More and more companies are coming up with innovations in the digital world that were once dominated by large companies such as Amanngirrbach, Zirkonzahn, Straumann and Holland, which dominate the dental milling machines market. But with 3D printing prototyping all this has changed, smaller companies have the option of bringing into the machines that leave us with a very nimble option in the dental area. The work with provisionals, dentures, and acrylic protocols can be printed out in a Record time, and the wax milling that milling machines make are delivered masterfully by the printer within less time and lower operating costs.

Colonial cell disaggregation and intracellular microcystin release following chlorination of naturally occurring Microcystis.

Colonial cell disaggregation and release of intracellular microcystin were evaluated following chlorine treatment of naturally occurring Microcystis. Microscopic observations of water samples collected from Lake Mead, Nevada, USA, confirmed the presence of colonial Microcystis with cells protected by an outer sheath up to 30 µm thick. During chlorination, two stages of cell decomposition were observed, stage 1: colonial cell disaggregation, and stage 2: unicellular degradation. Following a [Cl2]0:DOC0 ratio of 0.15 (t = 20 min, pH = 8.2-8.5) in unfiltered Lake Havasu samples, total particle count increased from (1.0 ± 0.11) × 10(5) to 4.2 × 10(5) particles/mL and fluorescent particle count increased from (1.2 ± 0.50) × 10(4) to 1.2 × 10(5) particles/mL, illustrating colonial cell disaggregation. Although total and fluorescent particles increased, the concentration of chlorophyll-a (Chl-a) decreased from 81 µg/L to 72 µg/L, and continued to decrease at higher [Cl2]0:DOC0 ratios. The preliminary second order rate constant for the reaction between Microcystis and chlorine in natural waters was estimated using either Chl-a (k = 15 M(-1) s(-1)) or fluorescence particle count (k = 38 M(-1) s(-1)) as an indicator of cell damage following colonial disaggregation (i.e., at [Cl2]0:DOC0 ratio ≥0.15). Complete release of intracellular microcystin-LR (MC-LR) was observed in both Lake Havasu and Lake Mead samples when applying a [Cl2]0:DOC0 ratio of 0.30 (t = 20 min), which was equivalent to a chlorine exposure of 8 min-mg/L for Lake Havasu samples. With chlorination, DOC increased by 3-18% indicating release of either colony-bound or cell-bound DOC. The results demonstrated the ability of chlorine to disaggregate/inactivate natural Microcystis colonies, and identified oxidation conditions resulting in complete release of intracellular MC-LR.