Effects of Drying Methods on Morphological Characteristics, Metabolite Content, and Antioxidant Capacity of Cordyceps sinensis.

Cordyceps sinensis is a rare and endangered medicinal herb in China and a typical medicinal and food plant. Most of the research related to Cordyceps sinensis focuses on its pharmacological effects, artificial cultivation and clinical applications. However, there are few comprehensive evaluations on the quality of Cordyceps sinensis under different drying methods. In this study, the effects of vacuum freeze-drying (DG), oven-drying (HG) and air-drying (YG) on the morphological characteristics, microstructure, antioxidant activity and metabolites of Cordyceps sinensis were investigated using wild Cordyceps sinensis as the research object. The results showed that in their appearance and morphology, the YG- and HG-method Cordyceps sinensis samples were darker in color and wilted, while the DG- method Cordyceps sinensis samples were golden yellow in color and had better fullness. In terms of microstructure, the stomata of the YG and HG method Cordyceps sinensis samples were relatively small and irregularly shaped, whereas those of the DG method Cordyceps sinensis samples were larger and neat. In terms of antioxidant capacity, the HG-method samples were the lowest, followed by the YG group, and the DG group had the highest total antioxidant capacity. A correlation analysis revealed a significant relationship between antioxidant capacity and lipids, lipid molecules, nucleosides, nucleotides, and analogs. A metabolomics analysis identified 1937 metabolites from 18 superclasses, with lipids, lipid-like molecules, organic acids and derivatives, organoheterocyclic compounds, and organic oxygen compounds being the predominant metabolites in Cordyceps sinensis. Differentially accumulated metabolites (DAMs) in DG samples showed higher levels of lipids and lipid molecules, organic oxygen compounds, organic acids and derivatives, and organoheterocyclic compounds compared to the other drying methods, suggesting DG as the optimal preservation method for Cordyceps sinensis. These findings offer insights for selecting appropriate drying methods and maintaining the post-drying quality of Cordyceps sinensis.

Comparison of different drying pretreatment combined with ultrasonic-assisted enzymolysis extraction of anthocyanins from Lycium ruthenicum Murr.

Extraction of anthocyanins from Lycium ruthenicum Murr. (L. ruthenicum) is a notable challenge in food production, requiring methods that balance efficiency and safety. In this study, we conducted a comparative analysis the extraction of anthocyanins by natural air drying (NAD), vacuum freeze drying (VFD), hot air drying (HAD), and vacuum microwave drying (MVD) combined with ultrasonic-assisted enzymolysis extraction (UAEE). The results demonstrated that the extraction yield and antioxidant activity of anthocyanins were significantly higher in VFD. This phenomenon can be attributed to the modification of raw material's microstructure, leading to an increased extraction yield of specific anthocyanins such as Cyanidin-3-galactoside, Delphinidin chloride, Cyanidin, and Petunidin. According to the pretreatment results, the extraction process of anthocyanins was further optimized. The highest yield (3.16 g/100 g) was obtained in following conditions: 0.24 % pectinase, 48 °C, solid:liquid = 1:21, and 21 min ultrasonic time. This study improves the commercial value and potential application of L. ruthenicum in food industry.

Effects of Different Drying Methods on Drying Characteristics, Microstructure, Quality, and Energy Consumption of Apricot Slices.

An appropriate drying method is crucial for producing high-quality dried apricots. In this study, the effects of four drying methods, hot air drying (HAD), infrared drying (IRD), pulse vacuum drying (PVD), and vacuum freeze-drying (VFD), on the drying kinetics and physical and nutritional characteristics of apricot slices were evaluated. PVD required the shortest time (16.25 h), followed by IRD (17.54 h), HAD (21.39 h), and VFD (34.64 h). VFD resulted in the best quality of apricot slices, with the smallest color difference (ΔE = 13.64), lowest water activity (0.312 ± 0.015) and browning degree (0.35), highest color saturation (62.84), lowest hardness (8.35 ± 0.47 N) and shrinkage (9.13 ± 0.65%), strongest rehydration ability (3.58 ± 0.11 g/g), a good microstructure, and high nutrient-retention rates (ascorbic acid content: 53.31 ± 0.58 mg/100 g, total phenolic content: 12.64 ± 0.50 mg GAE/g, and carotenoid content: 24.23 ± 0.58 mg/100 g) and antioxidant activity (DPPH: 21.10 ± 0.99 mmol Trolox/g and FRAP: 34.10 ± 0.81 mmol Trolox/g). The quality of PVD-treated apricot slices was second-best, and the quality of HAD-treated apricot slices was the worst. However, the energy consumption required for VFD was relatively high, while that required for PVD was lower. The results of this study provide a scientific basis for the large-scale industrial production of dried apricots.

GC-IMS-Based Volatile Characteristic Analysis of Hypsizygus marmoreus Dried by Different Methods.

Gas chromatography-ion mobility spectroscopy (GC-IMS) was used to analyze the volatile components in dried Hypsizygus marmoreus of different drying methods, including hot air drying (HAD), heat pump drying (HPD), heated freeze-drying (HFD), and unheated freeze-drying (UFD). A total of 116 signal peaks corresponding to 96 volatile compounds were identified, including 25 esters, 24 aldehydes, 23 alcohols, 13 ketones, 10 heterocyclic compounds, 8 carboxylic acids, 7 terpenes, 3 sulfur-containing compounds, 2 nitrogen-containing compounds, and 1 aromatic hydrocarbon. The total content of volatile compounds in H. marmoreus dried by the four methods, from highest to lowest, was as follows: HAD, HPD, HFD, and UFD. The main volatile compounds included carboxylic acids, alcohols, esters, and aldehydes. Comparing the peak intensities of volatile compounds in dried H. marmoreus using different drying methods, it was found that the synthesis of esters, aldehydes, and terpenes increased under hot drying methods such as HAD and HPD, while the synthesis of compounds containing sulfur and nitrogen increased under freeze-drying methods such as HFD and UFD. Nine common key characteristic flavor compounds of dried H. marmoreus were screened using relative odor activity values (ROAV > 1), including ethyl 3-methylbutanoate, acetic acid, 2-methylbutanal, propanal, methyl 2-propenyl sulfate, trimethylamine, 3-octanone, acetaldehide, and thiophene. In the odor description of volatile compounds with ROAV > 0.1, it was found that important flavor components such as trimethylamine, 3-octanone, (E)-2-octenal, and dimethyl disulfide are related to the aroma of seafood. Their ROAV order is HFD > UFD > HPD > HAD, indicating that H. marmoreus using the HFD method have the strongest seafood flavor. The research findings provide theoretical guidance for selecting drying methods and refining the processing of H. marmoreus.

Effect of different drying methods on the structure and properties of porous starch.

In order to investigate the effects of different drying methods on the properties of porous starch. The present study used four drying methods, namely hot air drying (HD), spray drying (SPD), vacuum freeze drying (FD) and supercritical carbon dioxide drying (SCD) to prepare maize and kudzu porous starch. Findings indicated that the physicochemical properties (e.g., morphology, crystallinity, enthalpy value, porosity, surface area and water absorption capacity as well as dye absorption capacity, particle size) of porous starch were significantly affected by the drying method. Compared with other samples, SCD-treated porous starch exhibited the highest surface areas of the starch (2.943 and 3.139 m2/g corresponding to kudzu and maize, respectively), amylose content (22.02 % and 16.85 % corresponding to kudzu and maize, respectively), MB and NR absorption capacity (90.63 %, 100.26 % and 90.63 %, 100.26 %, corresponding to kudzu ad maize, respectively), and thermal stability, whereas HD-treated porous starch showed the highest water-absorption capacity (123.8 % and 131.31 % corresponding to kudzu and maize, respectively). The dye absorption of the maize and kudzu porous starch was positively correlated with surface area, according to Pearson's correlation analysis. Therefore, in this study, our aim was to explore the effects of different drying methods on the Structure and properties of porous starch, and provide reference for selecting the best drying method for its application in different fields.

Advanced fabrication of complex biopolymer microcapsules via RSM-optimized supercritical carbon dioxide solution-enhanced dispersion: A comparative analysis of various microencapsulation techniques.

This work aimed to enhance hemp seed oil encapsulation within a hemp seed protein-alginate complex by optimizing parameters in the solution-enhanced dispersion process, employing supercritical carbon dioxide (SEDS) without reliance on organic solvents or elevated temperatures. By response surface methodology (RSM), the microencapsulation efficacy (MEE), particle size (PS) and peroxide value (PV) was determined with respect to three parameters; temperature (°C), pressure (bar) and feed flow rate (mL/min). The optimum conditions were predicted at temperature (40 °C), pressure (150 bar) and feed flow rate (2 mL/min) to offer an MEE of 89.47%, PS of 7.81 µm and PV of 2.91 (meq/kg oil). In addition, the SEDS method was compared with spray- and freeze-drying for encapsulating hemp seed oil. The findings demonstrated SEDS' superiority, exhibiting exceptional attributes such as the highest MEE, smallest PS and the production of spherical, smooth microcapsules. This highlights its effectiveness in comparison to spray- and freeze-drying methods.

Optimization of bacterial cellulose production by Komagataeibacter sucrofermentans in synthetic media and agrifood side streams supplemented with organic acids and vitamins.

The effect of thiamine (TA), ascorbic acid (AA), citric acid, and gallic acid (GA) on bacterial cellulose (BC) production by Komagataeibacter sucrofermentans, in synthetic (Hestrin and Schramm, HS) and natural substrates (industrial raisins finishing side stream extract, FSSE; orange juice, OJ; green tea extract, GTE), was investigated. The Response Surface Methodology was found reliable for BC yield prediction and optimization. Higher yields were achieved in the FSSE substrates, especially those supplemented with AA, TA, and GA (up to 19.4 g BC/L). The yield in the non-fortified substrates was 1.1-5.4 and 11.6-15.7 g/L, in HS and FSSE, respectively. The best yield in the natural non-fortified substrate FSSE-OJ-GTE (50-20-30 %), was 5.9 g/L. The porosity, crystallinity, and antioxidant properties of the produced BC films were affected by both the substrate and the drying method (freeze- or oven-drying). The natural substrates and the process wastewaters can be further exploited towards added value and sustainability. Take Home Message Sentence: Raisin and citrus side-streams can be efficiently combined for bacterial cellulose production, enhanced by other vitamin- and phenolic-rich substrates such as green tea.

Effects of different drying methods on Rubus chingii Hu fruit during processing.

In this study, the dried fruits of Rubus chingii Hu (Chinese name: Fu-Pen-Zi; FPZ) were processed and dried by three methods-in the shade, the sun, and the oven. The composition regarding the standard ingredient, color, and antioxidant capacities were investigated pro- and post-processing. The technique of headspace-solid-phase-microextraction-gas-chromatography-mass spectrometry (HS-SPME-GC-MS) and flavoromics were used to analyze the flavor-conferring metabolites of FPZ. The results obtained revealed that the highest use value and antioxidant capacities were detected in the FPZ fruits processed and dried in the shade. A total of 358 metabolites were detected from them mainly consisting of terpenoids, heterocyclic compounds, and esters. In differential analysis, the down-regulation of the metabolites was much greater than their up-regulation after all three drying methods. In an evaluation of the characteristic compounds and flavors produced after the three methods, there were variations mainly regarding the green and fruity odors. Therefore, considerable insights may be obtained for the development of novel agricultural methods and applications in the pharmaceutical and cosmetic industries by analyzing and comparing the variations in the chemical composition detected pre- and post-processing of the FPZ fruits. This paper provides a scientific basis for quality control in fruits and their clinical applications.

Transdermal Drug Delivery System of Linagliptin Sustained-release Microparticle Gels: In vitro Characterization and In vivo Evaluation.

BACKGROUND: Linagliptin (LNG) exhibits poor bioavailability and numerous side effects, significantly limiting its use. Transdermal drug delivery systems (TDDS) offer a potential solution to overcome the first-pass effect and gastrointestinal reactions associated with oral formulations. OBJECTIVE: The aim of this study was to develop LNG microparticle gels to enhance drug bioavailability and mitigate side effects. METHODS: Linagliptin hyaluronic acid (LNG-HA) microparticles were prepared by spray drying method and their formulation was optimized via a one-factor method. The solubility and release were investigated using the slurry method. LNG-HA microparticle gels were prepared and optimised using in vitro transdermal permeation assay. The hypoglycaemic effect of the LNG-HA microparticle gel was examined on diabetic mice. RESULTS: The results indicated that the LNG-HA microparticle encapsulation rate was 84.46%. Carbomer was selected as the gel matrix for the microparticle gels. Compared to the oral API, the microparticle gel formulation demonstrated a distinct biphasic release pattern. In the first 30 minutes, only 43.56% of the drug was released, followed by a gradual release. This indicates that the formulation achieved a slow-release effect from a dual reservoir system. Furthermore, pharmacodynamic studies revealed a sustained hypoglycemic effect lasting for 48 hours with the LNG microparticle gel formulation. CONCLUSION: These findings signify that the LNG microparticle gel holds significant clinical value for providing sustained release and justifies its practical application.

Comparison of the effects of three drying methods on lignin properties.

In the last few years, a serious effort has been initiated to develop standard methods for lignin characterization at the national and international levels. Thus, several Canadian and ISO standards were recently developed. The current results were generated in an effort to assist the ISO/TC6 Committee come up with a reliable standard method for the measurement of the dry solids content of lignins. In particular, this work investigated the drying of lignin using three different drying methods: conduction oven drying (105 °C), vacuum oven drying at (60 °C), and freeze drying. Ten different lignins were used in this study including wet and air-dried softwood and hardwood kraft lignins in the acid and base forms from the industrial LignoForce™ process and hydrolysis lignin from the TMP-Bio™ process. The results showed that 7 h, 48 h and 24 h were sufficient to reach a constant solids content in the case of all lignins when oven drying, vacuum oven drying under negative pressure (150 mbar), and freeze drying (25 mT) were used, respectively. Kraft lignins in the base form showed higher sensitivity to degradation compared to lignins in the acid form. The total hydroxyl group content of air-dried and wet hardwood lignins in the base form decreased by more than 50 % after vacuum oven-drying for 71.5 h or oven-drying for 16 h compared to freeze-drying for 68 h. The decrease in the total hydroxyl groups was more pronounced (70 %) when the wet softwood lignin in the base form was dried in the oven compared to freeze drying for 68 h.

Influence of Five Drying Methods on Active Compound Contents and Bioactivities of Fresh Flowers from Syringa pubescens Turcz.

The flower of Syringa pubescens Turcz. is used in Chinese folk medicine and also as a flower tea for healthcare. The effects of five drying methods on the active compound contents, the antioxidant abilities, anti-inflammatory properties and enzyme inhibitory activities were evaluated. The plant materials were treated using shade-drying, microwave-drying, sun-drying, infrared-drying and oven-drying. The seven active compounds were simultaneously determined using an HPLC method. Furthermore, the chemical profile was assessed using scanning electron microscopy, ultraviolet spectroscopy and infrared spectroscopy. The antioxidant capacities and protective effects on L02 cells induced with hydrogen peroxide were measured. The anti-inflammatory effects on lipopolysaccharide-induced RAW264.7 cells were investigated. The enzyme inhibitory activities were determined against α-amylase, α-glucosidase cholinesterases and tyrosinase. The results indicated that drying methods had significant influences on the active compound contents and biological properties. Compared with other samples, the OD samples possessed low IC50 values with 0.118 ± 0.004 mg/mL for DPPH radical, 1.538 ± 0.0972 for hydroxyl radical and 0.886 ± 0.199 mg/mL for superoxide radical, while the SHD samples had stronger reducing power compared with other samples. The SHD samples could be effective against H2O2-induced injury on L02 cells by the promoting of T-AOC, GSH-PX, SOD and CAT activities and the reducing of MDA content compared with other samples. Furthermore, SPF samples, especially the SHD sample, could evidently ameliorate inflammation through the inhibition of IL-6, IL-1ß and TNF-α expression. All the studied SPF samples exhibited evidently inhibitory effects on the four enzymes. The IC50 values of inhibitory activity on α-glucosidase and α-amylase from SHD sample were 2.516 ± 0.024 and 0.734 ± 0.034 mg/mL, respectively. SD samples had potential inhibitory effects on cholinesterases and tyrosinase with IC50 values of 3.443 ± 0.060 and 1.732 ± 0.058 mg/mL. In consideration of active compound contents and biological activities, it was recommended that SHD and SD be applied for drying SPF at an industrial scale.

Thermal treatment enhances the resisting exercise fatigue effect of Phyllanthus emblica L.: novel evidence from tannin conversion in vitro, metabolomics, and gut microbiota community analysis.

Polyphenols are the main component of Phyllanthus emblica (PE). However, polyphenols are so easy to transform that it is unknown that how drying methods driven by heating affect the anti-fatigue effect of PE. This manuscript investigated the effects of five drying methods on the chemical composition transformation and anti-fatigue of PE, and discussed the action mechanism. The results suggested that the anti-fatigue effect of PE with hot-air-dried at 100 °C was the best, which was as 1.63 times as that with freeze-drying. Ellagic acid (EA) may be a key component of PE in anti-fatigue, and its mechanism of action may be related to regulating intestinal microbiota, protecting mitochondria, and regulating energy metabolism. This study first revealed the thermal transformation of polyphenols in PE, found the most effective strategy for enhancing the anti-fatigue function, and explores its action mechanism.

Effects of different over-fired drying methods on the aroma of Lu'an Guapian tea.

Over-fired drying, a crucial process in the production of Lu'an Guapian (LAGP) tea, greatly enriches the tea's aroma. In this study, the aroma compounds of LAGP tea processed through pulley charcoal drying (PCD), roller drying (RD), roller-conveyor drying (RCD), and hot air drying (HD) were analyzed using gas chromatography-mass spectrometry. A subsequent analysis of aroma extraction dilution analysis and odor activity values revealed that (E)-ß-ionone, dimethyl sulfide, (E,E)-2,4-heptadienal, geraniol, linalool, benzeneacetaldehyde, coumarin, 2-ethyl-3,5-dimethyl-pyrazine, indole, hexanal, (Z)-jasmone, and (Z)-3-hexen-1-ol were the key contributors to the samples' aroma variation. Moreover, a quantitative descriptive analysis and aroma recombination and omission experiments analysis revealed that (E)-ß-ionone is the most critical contributor to the formation of floral aroma in tea processed using PCD, whereas (E,E)-2,4-heptadienal is responsible for the more pronounced fresh aroma in tea processed using HD. In addition, 2-ethyl-3,5-dimethyl-pyrazine contributes to the formation of a roasted aroma in tea processed using RD and RCD. The study results provide a theoretical basis for choosing the processing method, especially for drying, to obtain high-quality LAGP tea.

Aroma Difference Analysis of Partridge Tea (Mallotus oblongifolius) with Different Drying Treatments Based on HS-SPME-GC-MS Technique.

Partridge tea has high medicinal value due to its rich content of terpenoids, phenols, flavonoids, and other related bioactive components. In order to study the best drying method for partridge tea, four treatments, including outdoor sun drying (OD), indoor shade drying (ID), hot-air drying (HAD), and low-temperature freeze-drying (LTD), were performed. The results showed that the OD and HAD treatments favored the retention of the red color of their products, while the ID and LTD treatments were more favorable for the retention of the green color. The HS-SPME-GC-MS results showed that a total of 82 compounds were identified in the four drying treatments of partridge tea, and the most abundant compounds were terpenoids (88.34-89.92%). The HAD-treated tea had the highest terpenoid content (89.92%) and high levels of flavor compounds typical of partridge tea (52.28%). OPLS-DA and PCA showed that α-copaene, ß-bourbonene, caryophyllene, α-guaiene, and δ-cadinene could be considered candidate marker compounds for judging the aroma quality of partridge tea with different drying treatments. This study will not only provide a basis for processing and flavor quality control but also for spice and seasoning product development in partridge tea.

Strategies for improving loading of emulsion-based functional oil powder.

Functional oil is type of oil that is beneficial to human health and has nutritional value, however, functional oils are rich in bioactive substances such as polyunsaturated fatty acids which are sensitive to environmental factors and are susceptible to oxidation or decomposition. Construction of emulsion-based oil powder is a promising approach for improving the stability and solubility of functional oils. However, the low effective loading of oil in powder is the main challenge limiting encapsulation technology. This manuscript focuses on reviewing the current research progress of emulsion-based functional oil powder construction and systematically summarizes the processing characteristics of emulsion-based oil powder with high payload and summarizing the strategies to enhance the payload of powder in term of emulsification and drying, respectively. The impact of emulsion formation on oil powder production is discussed from different characteristics of emulsions, including emulsion composition, emulsification methods and emulsion types. In addition, the current status of improving material loading performance by various modifications to the drying technology is discussed, including the addition of drying processing additives, changes in drying parameters and the effect of innovative technological means.

Influence of Pre-Treatment and Drying Methods on the Quality of Dried Carrot Properties as Snacks.

The aim of the current research was to evaluate the effect of pre-treatment and drying methods on the properties of dried carrots. Carrots were blanched (B) (1 or 3 min) or osmotic dehydrated (OD) (15 or 30 min) and dried by either convection (CD), microwave-convection (MW-CD), microwave-vacuum (MVD), or freeze-drying (FD). FD carrots showed the highest dry matter content (93.6-95.8%) and the lowest water activity (0.24-0.38). MVD carrots had lower dry matter content (79.5-95.8%) and two times more water activity (0.447-0.637) than FD. The highest color difference (∆E) in relation to raw material was noted in MVD samples (22-35) and the smallest in CD and FD (7-18), mainly due to the increase in brightness of the dried carrot. In general dried MCD carrot samples were characterized by the highest max force (hardness) (21.6-42.5 N; on average 34.7 N) in the breaking test and the lowest hardness was observed in the CD (10.8 N) ones. Pre-treatment and drying caused a significant decrease in the content of carotenoids (2.0-2.7 times) and chlorophyll (2.7-4.5 times) compared to the fresh carrot but a retention or increase in the total content of phenolics and antioxidant activity, especially in microwave-vacuum-dried carrots with an increase of even 2.7-2.9 times compared to raw material. High phenolic content (195.6-277.4 mg GA/100 g d.m.) was found in pre-osmotic dehydrated samples, and lower phenolic content was found in blanched samples (110.7-189.6 mg GA/100 g d.m.). Significantly, the highest average antioxidant activity was found in microwave-vacuum-dried samples (228.9 µmol Trolox/100 g d.m.). The results of this study indicate that microwave-vacuum-drying as an alternative to freeze-drying, including in combination with thermal or osmotic treatment, is very promising for the production of dried carrot snacks.

Effect of Extraction Methods on the Antioxidant Potential and Cytotoxicity of the Combined Ethanolic Extracts of Daucus carota L., Beta vulgaris L., Phyllanthus emblica L. and Lycopersicon esculentum against Gastric Adenocarcinoma Cells.

Frequent consumption of fruits and vegetables in the daily diet may alleviate the risk of developing chronic diseases. Daucus carota L. (carrot), Beta vulgaris L. (beetroot) Phyllanthus emblica L. (amla), and Lycopersicon esculentum M (tomatoes) are traditionally consumed functional foods that contain a high concentration of antioxidants, ascorbic acid, polyphenols, and numerous phytochemicals. This study assessed how three distinct preparation methods affect the phenolic, flavonoid, carotenoid, and ascorbic acid contents, antioxidant level, and cytotoxicity of the combined fruit extract. The fruit samples were taken in the ratio of carrot (6): beetroot (2): tomato (1.5): amla (0.5) and processed into a lyophilized slurry (LS) extract, lyophilized juice (LJ) extract, and hot-air oven-dried (HAO) extract samples. The sample extracts were assessed for their phytoconstituent concentrations and antioxidant and cytotoxic potential. The total phenolic content in LS, LJ, and HAO extracts was 171.20 ± 0.02, 120.73 ± 0.02, and 72.05 ± 0.01 mg gallic acid equivalent/100 g, respectively and the total flavonoid content was 23.635 ± 0.003, 20.754 ± 0.005, and 18.635 ± 0.005 mg quercetin equivalent/100 g, respectively. Similarly, total ascorbic acid content, carotenoids, and antioxidant potential were higher in the LS and LJ extracts than in HAO. Overall, the LS extract had a substantially higher concentration of phytochemicals and antioxidants, as well as higher cytotoxic potential, compared to the LJ and HAO extracts. The LS extract was tested in the MKN-45 human gastric cancer cell line to demonstrate its effective antioxidant potential and cytotoxicity. Hence, lyophilization (freezing) based techniques are more effective than heat-based techniques in preserving the phytoconstituents and their antioxidant and cytotoxic potential.

[Effects of different drying methods on quality of male flowers of Eucommia ulmoides based on color and chemical composition].

To study the effects of different drying methods on the quality of male flowers of Eucommia ulmoides(MFOEU), we treated fresh MFOEU samples with drying in the shade(DS), vacuum freeze drying(VFD), high-or low-temperature hot air drying(HTHAD, LTHAD), microwave drying(MD), and vacuum drying(VD), respectively. The color, total flavonoid content, total polysaccharide content, and main active components such as geniposide, geniposidic acid, rutin, chlorogenic acid, galuteolin, pinoresinol diglucoside, and aucubin in MFOEU were taken as the evaluation indicators. The quality of MFOEU was comprehensively evaluated by entropy weight method combined with color index method, partial least squares discriminant analysis and content clustering heat map. The experimental results showed that VFD and DS basically kept the original color of MFOEU. The MFOEU treated with MD had higher content of total polysaccharides, phenylpropanoids, lignans, and iridoids. The MFOEU treated with LTHAD had higher content of total flavonoids and that treated with VD had lower content of active components. According to the results of comprehensive evaluation, the quality of MFOEU dried with different methods followed the order of MD>HTHAD>VFD>LTHAD>DS>VD. Considering the color of MFOEU, the suitable drying methods were DS and VFD. Considering the color, active components, and economic benefits of MFOEU, MD was the suitable drying method. The results of this study are of a reference value for the determination of suitable methods for MFOEU processing in the producing areas.

Effect of Drying Process on the Formation of the Characteristic Flavor of Oyster (Crassostrea hongkongensis).

Oysters are nutritious and tasty but difficult to store. Drying can extend the storage period of oysters and give them a unique flavor. In this study, the effects of four drying procedures, namely, vacuum freeze drying (VFD), vacuum drying (VD), natural sun-drying (NSD), and hot air drying (HAD), on the flavor characteristics of oysters (Crassostrea hongkongensis) were investigated using blanched oysters as a control (CK). Results showed that HAD produced more free amino acids than the other methods, but VFD retained the most flavor nucleotides. Compared with cold drying (VFD), hot drying (VD, NSD, and HAD) increased the abundance of organic acids, betaine, and aroma substances. Glutamic acid, alanine, AMP, hexanal, octanal, heptanal, (E, E)-2,4-heptadienal, (E)-2-decenal, nonanal, etc., are defined as the characteristic flavor compounds of dried oysters, with umami, sweet, green, fatty, and fruity aromas being the main organoleptic attributes of dried oysters. Glutamic acid, glycine, betaine, IMP, pentanal, ethyl heptanoate, (E, Z)-2,4-nonadienal, 1-octen-3-one, 2-hexenal, 2-octenal, hexanal, decanal were defined as markers to distinguish different drying methods. Overall, HAD showed improved flavor qualities and characteristics and was better suited for the highly commercialized production of dried oysters.

Effects of Drying Treatments on Nutritional Compositions, Volatile Flavor Compounds, and Bioactive Substances of Broad Beans.

In this study, different drying methods, including hot air drying, sun drying, and freeze drying were employed to dry fresh broad beans. The nutritional composition, volatile organic components and bioactive substances of the dried broad beans were systematically compared. The results indicated significant differences (p < 0.05) in nutritional composition, such as protein and soluble sugar content. Among the 66 identified volatile organic compounds, freeze drying and hot air drying significantly promote the production of alcohols and aldehydes, while sun drying effectively preserves esters. In terms of bioactive substances, broad beans dried by freeze drying exhibit the highest total phenol content as well as the strongest antioxidant capacity and gallic acid, followed by sun drying. The chemometric analysis revealed that the bioactive compounds in broad beans dried by three different methods were primarily composed of flavonoids, organic acids, and amino acids with significant differentiation. Notably, freeze-dried and sun-dried broad beans exhibited a higher concentration of differential substances.