Mesoporous Nitrogen-Doped Holey Reduced Graphene Oxide: Preparation, Purification, and Application for Metal-Free Electrochemical Sensing of Dopamine.

Holey graphenic nanomaterials with porosity within the basal plane attract significant interest. It is observed that the perforation of graphene can enhance the specific surface area of the nanosheet, ensuring effective wetting and penetration of electrolytes to the electrode surface, facilitating rapid charge transfer, and boosting the electrocatalytic efficacy of the transducers. This study reports the first example of nitrogen-doped holey reduced graphene oxide with a mesoporous morphology of the graphene basal plane (N-MHG). It is shown that N-MHG can be synthesized through a one-step hydrothermal treatment of GO using NH3 and H2O2. A straightforward procedure for the purification of N-MHG has also been developed. AFM, TEM, and Raman analyses have revealed that N-MHG possesses a highly mesoporous network structure with a pore size ranging from 10 to 50 nm. X-ray photoelectron spectroscopy data have indicated a partial reduction of the graphene oxide sheets during the etching process but also show a 3-5 times higher content of C═O and O-C═O fragments compared to rGO. This could account for the remarkable stability of the N-MHG aqueous suspension. An electrochemical sensor for dopamine analysis is assembled on a glassy carbon electrode with N-MHG/Nafion membrane and characterized by cyclic voltammetry and electrochemical impedance spectroscopy.

Challenges faced with 3D-printed electrochemical sensors in analytical applications.

Prototyping analytical devices with three-dimensional (3D) printing techniques is becoming common in research laboratories. The attractiveness is associated with printers' price reduction and the possibility of creating customized objects that could form complete analytical systems. Even though 3D printing enables the rapid fabrication of electrochemical sensors, its wider adoption by research laboratories is hindered by the lack of reference material and the high "entry barrier" to the field, manifested by the need to learn how to use 3D design software and operate the printers. This review article provides insights into fused deposition modeling 3D printing, discussing key challenges in producing electrochemical sensors using currently available extrusion tools, which include desktop 3D printers and 3D printing pens. Further, we discuss the electrode processing steps, including designing, printing conditions, and post-treatment steps. Finally, this work shed some light on the current applications of such electrochemical devices that can be a reference material for new research involving 3D printing.

Sulfanilamide Electrochemical Sensor Using Phenolic Substrates and CO2 Laser Pyrolysis.

The concentration of environmental pollutants needs to be monitored constantly by reliable analytical methods since they pose a public health risk. Developing simple and affordable sensors for such pollutants can allow for large-scale monitoring economically. Here, we develop a simple electrochemical sensor for sulfanilamide (SFD) quantification using a phenolic resin substrate and a CO2 laser to pyrolyze the sensor geometry over the substrate. The sensors are modified with carbon nanotubes via a simple drop-casting procedure. The carbon nanotube loading effect the electrochemical performance toward a redox probe and analytical performance for SFD detection is investigated, showing no net benefit beyond 1 mg L-1 of carbon nanotubes. The effects of the modification on the SFD oxidation are shown to be more than just an electrode area effect and possibly attributed to the fast electron transfer kinetics of the carbon nanotubes. SFD detection is performed at small solution volumes under static (800 µL) and hydrodynamic conditions (3 mL) in a fully integrated, miniaturized batch-injection analyses cell. Both methods have a similar linear range from 10.0 to 115.0 µmol L-1 and high selectivity for SFD determination. Both systems are used to quantify SFD in real samples as a proof of concept, showcasing the proposed device's applicability as a sensor for environmental and public health monitoring of SFD.

Determination of Fluoxetine in Weight Loss Herbal Medicine Using an Electrochemical Sensor Based on rGO-CuNPs.

The rising popularity of herbal medicine as a weight loss remedy, fueled by misleading propaganda, raises concerns about the manufacturing processes and potential inclusion of controlled substances such as fluoxetine (FLU). The objective of this work is to develop and evaluate the performance of an electrochemical device by modifying a glassy carbon electrode (GC) with a nanocomposite based on reduced graphene oxide (rGO) and copper nanoparticles (CuNPs) for detecting FLU in manipulated herbal medicines. Scanning electron microscopy (FEG-SEM) and cyclic voltammetry (CV) were applied for morphological and electrochemical characterization and analysis of the composite's electrochemical behavior. Under optimized conditions, the proposed sensor successfully detected FLU within the range of 0.6 to 1.6 µmol L-1, showing a limit of detection (LOD) of 0.14 µmol L-1. To determine the presence of FLU in herbal samples, known amounts of the analytical standard were added to the sample, and the analyses were performed using the standard addition method, yielding recoveries between -2.13 and 2.0%.

Covalent organic frameworks as highly versatile materials for the removal and electrochemical sensing of organic pollutants.

The presence of persistent organic compounds in water has become a worldwide issue due to its resistance to natural degradation, inducing its environmental resilience. Therefore, the accumulation in water bodies, soils, and humans produces toxic effects. Also, low levels of organic pollutants can lead to serious human health issues, such as cancer, chronic diseases, thyroid complications, immune system suppression, etc. Therefore, developing efficient and economically viable remediation strategies motivates researchers to delve into novel domains within material science. Moreover, finding approaches to detect pollutants in drinking water systems is vital for safeguarding water safety and security. Covalent organic frameworks (COFs) are valuable materials constructed through strong covalent interactions between blocked monomers. These materials have tremendous potential in removing and detecting persistent organic pollutants due to their high adsorption capacity, large surface area, tunable porosity, porous structure, and recyclability. This review discusses various synthesis routes for constructing non-functionalized and functionalized COFs and their application in the remediation and electrochemical sensing of persistent organic compounds from contaminated water sources. The development of COF-based materials has some major challenges that need to be addressed for their suitability in the industrial configuration. This review also aims to highlight the importance of COFs in the environmental remediation application with detailed scrutiny of their challenges and outcomes in the current research scenario.

3D-printed electrochemical cells with laser engraving: developing portable electroanalytical devices for forensic applications.

A new electrochemical device fabricated by the combination of 3D printing manufacturing and laser-generated graphene sensors is presented. Cell and electrodes were 3D printed by the fused deposition modeling (FDM) technique employing acrylonitrile butadiene styrene filament (insulating material that composes the cell) and conductive filament (lab-made filament based on graphite dispersed into polylactic acid matrix) to obtain reference and auxiliary electrodes. Infrared-laser engraved graphene, also reported as laser-induced graphene (LIG), was produced by laser conversion of a polyimide substrate, which was assembled in the 3D-printed electrochemical cell that enables the analysis of low volumes (50-2000 µL). XPS analysis revealed the formation of nitrogen-doped graphene multilayers that resulted in excellent electrochemical sensing properties toward the detection of atropine (ATR), a substance that was found in beverages to facilitate sexual assault and other criminal acts. Linear range between 5 and 35 µmol L-1, detection limit of 1 µmol L-1, and adequate precision (RSD = 4.7%, n = 10) were achieved using differential-pulse voltammetry. The method was successfully applied to beverage samples with recovery values ranging from 80 to 105%. Interference studies in the presence of species commonly found in beverages confirmed satisfactory selectivity for ATR sensing. The devices proposed are useful portable analytical tools for on-site applications in the forensic scenario.

Advancement in Paper-Based Electrochemical Biosensing and Emerging Diagnostic Methods.

The utilization of electrochemical detection techniques in paper-based analytical devices (PADs) has revolutionized point-of-care (POC) testing, enabling the precise and discerning measurement of a diverse array of (bio)chemical analytes. The application of electrochemical sensing and paper as a suitable substrate for point-of-care testing platforms has led to the emergence of electrochemical paper-based analytical devices (ePADs). The inherent advantages of these modified paper-based analytical devices have gained significant recognition in the POC field. In response, electrochemical biosensors assembled from paper-based materials have shown great promise for enhancing sensitivity and improving their range of use. In addition, paper-based platforms have numerous advantageous characteristics, including the self-sufficient conveyance of liquids, reduced resistance, minimal fabrication cost, and environmental friendliness. This study seeks to provide a concise summary of the present state and uses of ePADs with insightful commentary on their practicality in the field. Future developments in ePADs biosensors include developing novel paper-based systems, improving system performance with a novel biocatalyst, and combining the biosensor system with other cutting-edge tools such as machine learning and 3D printing.

Voltammetric analysis of luminescent markers in gunshot residues.

Currently, SEM-EDS is used to detect gunshot residue (GSR) from the presence of Ba, Pb, and Sb in the sample. However, the development of new nontoxic ammunition (NTA) has prevented conventional metals from being found. In this work, we aim to determine the presence of an inorganic luminescent chemical marker based on rare earth in gunshot residues using the technique of squarewave voltammetry (SWV). After firing, the luminescent complex [(Eu2 Zr)(btc)3 (Hbtc)0.5 .6H2 O], which is used as a chemical marker, can be detected under a UV lamp. An aqueous solution with 0.1 mol L-1 KCl as supporting electrolyte can be easily collected on carbon paste electrode surfaces for SWV analysis A = 100 mV, f = 10 Hz, and step potential of 5 mV are required. The luminescent marker incorporated into the carbon paste electrode showed two anodic peak currents in the region of 0.4 V (vs Ag/AgCl) and at 0.75 V (vs Ag/AgCl) and also a cathodic one in 0.4 V (vs Ag/AgCl). SEM-EDS was able to analyze the same voltammetric results for conventional and nontoxic ammunition containing the luminescent marker. Therefore, voltammetry and SEM-EDS are valid for detecting the new residue marker in GSR. Despite this, the electrochemical method is still more advantageous because of its low cost and lack of expensive equipment and supplies in forensic laboratories.

Novel solid inks based on beeswax, graphite and graphene applied to the fabrication of paper-based sensor for galactose determination.

In this study, we present for the first time a simple and novel method for the fabrication of paper-based electrochemical sensors. The device development was carried out in a single stage with a standard wax printer. Hydrophobic zones were delimited with commercial solid ink, while electrodes were generated using new composite solid inks of graphene oxide/graphite/beeswax (GO/GRA/beeswax) and graphite/beeswax (GRA/beeswax). Subsequently, the electrodes were electrochemically activated by applying an overpotential. Various experimental variables for the GO/GRA/beeswax composite synthesis and electrochemical system obtention were evaluated. The activation process was examined by SEM, FTIR, cyclic voltammetry, electrochemical impedance spectroscopy and contact angle measurement. These studies showed morphological and chemical changes in the electrode active surface. As a result, the activation stage considerably improved the electron transfer on the electrode. The manufactured device was successfully applied for galactose (Gal) determination. This method presented a linear relation in the Gal concentration range from 84 to 1736 µmol L-1, with a LOD of 0.1 µmol L-1. The variation within and between-assay coefficients were 5.3% and 6.8%, respectively. The strategy here exposed for paper-based electrochemical sensors design is an unprecedented alternative system and represents a promising tool for mass production of economic analytical devices.

On-Site Therapeutic Drug Monitoring of Paracetamol Analgesic in Non-Invasively Collected Saliva for Personalized Medicine.

Paracetamol or acetaminophen is the main non-opioid analgesic recommended for mild pain by the World Health Organization (WHO) analgesic ladder. However, the high levels used of paracetamol are associated with the hepatotoxicity and nephrotoxicity caused by accumulation of toxic metabolites. The sensor is produced on a polyester substrate containing a full electrochemical device with working, auxiliary, and reference electrodes in which, guiding personalized medicine solutions are not reported. Temporal paracetamol profiles in human saliva are performed with the subject taking different amounts of commercial analgesic pills. The variation of saliva paracetamol levels is demonstrated to be interference free from electroactive interfering species and human saliva constituents. In addition, the sensor displays to be useful as a disposable device for the fast detection of paracetamol in untreated raw saliva following pill intake. The maximum concentration (Cmax ) and half-life time (t1/2 ) for paracetamol are 143.27 µm and 110 min. The results demonstrate the potential of a simple strategy with electrochemical devices for noninvasive personalized therapy toward guiding drug interventions through tracking of active substance, detecting, and correcting insufficiency of absorption to meet individual needs avoiding overdoses, side effects, and intoxication.

Recent progress and future perspectives of polydopamine nanofilms toward functional electrochemical sensors.

Since its discovery in 2007, polydopamine nanofilms have been widely used in many areas for surface functionalization. The simple and low-cost preparation method of the nanofilms with tunable thickness can incorporate amine and oxygen-rich chemical groups in virtually any interface. The remarkable advantages of this route have been successfully used in the field of electrochemical sensors. The self-adhesive properties of polydopamine are used to attach nanomaterials onto the electrode's surface and add chemical groups that can be explored to immobilize recognizing species for the development of biosensors. Thus, the combination of 2D materials, nanoparticles, and other materials with polydopamine has been successfully demonstrated to improve the selectivity and sensitivity of electrochemical sensors. In this review, we highlight some interesting properties of polydopamine and some applications where polydopamine plays an important role in the field of electrochemical sensors.

An electrochemical sensor-based carbon black associated with a modified mixed oxide (SiO2/TiO2/Sb2O5) for direct determination of thiamethoxam in raw honey and water samples.

The study aimed to develop an electrochemical sensor based on glassy carbon, mixed oxide (SiO2/TiO2/Sb2O5), and carbon black. The material was synthesized, characterized, and used to determine thiamethoxam in raw honey and water. The morphologic structure and electrochemical performance of the sensor was characterized by scanning electron microscopy and cyclic voltammetry. Differential pulse voltammetry with a concentration of 0.1 mol L-1 of Britton-Robinson buffer at pH 7.0 allowed the generation of a method to determine thiamethoxam in a linear range of 0.25 to 100.5 µmol L-1 and with a limit of detection of 0.012 µmol L-1. The system efficiently quantified traces of thiamethoxam in raw honey and tap water samples. The modified sensor did not present interferences of K+, Na+, Ca2+, Mg2+, glyphosate, imidacloprid, and carbendazim. In addition, the device showed good recovery values for thiamethoxam when applied directly to honey and water samples without any treatment, presenting an electrochemical sensor to monitor real-time hazardous substances in environmental and food matrices.

Electrochemical Sensor for Hydrogen Peroxide Based on Prussian Blue Electrochemically Deposited at the TiO2-ZrO2-Doped Carbon Nanotube Glassy Carbon-Modified Electrode.

In this investigation, a hydrogen peroxide (H2O2) electrochemical sensor was evaluated. Prussian blue (PB) was electrodeposited at a glassy carbon (GC) electrode modified with titanium dioxide- and zirconia-doped functionalized carbon nanotubes (TiO2.ZrO2-fCNTs), obtaining the PB/TiO2.ZrO2-fCNTs/GC-modified electrode. The morphology and structure of the nanostructured material TiO2.ZrO2-fCNTs was characterized by transmission electron microscopy, the specific surface area was determined via Brunauer-Emmett-Teller, X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The electrochemical properties were studied by cyclic voltammetry and chronoamperometry. Titania-zirconia nanoparticles (5.0 ± 2.0 nm) with an amorphous structure were directly synthesized on the fCNT walls, aged during periods of 20 days, obtaining a well-dispersed distribution with a high surface area. The results indicated that the TiO2.ZrO2-fCNT-nanostructured material exhibits good electrochemical properties and could be tunable by enhancing the modification conditions and method of synthesis. Covering of the nanotubes with TiO2-ZrO2 nanoparticles is one of the main factors that affected immobilization and sensitivity of the electrochemical biosensor. The electrode modified with TiO2-ZrO2 nanoparticles with the 20-day aging time was superior regarding its reversibility, electric communication, and high sensitivity and improves the immobilization of the PB at the electrode. The fabricated sensor was used in the detection of H2O2 in whey milk samples, presenting a linear relationship from 100 to 1,000 µmol L-1 between H2O2 concentration and the peak current, with a quantification limit (LQ) of 59.78 µmol L-1 and a detection limit (LD) of 17.93 µmol L-1.

Recent developments on graphene and its derivatives based electrochemical sensors for determinations of food contaminants.

The sensing of food contaminants is essential to prevent their adverse health effects on the consumers. Electrochemical sensors are promising in the determination of electroactive analytes including food pollutants, biomolecules etc. Graphene nanomaterials offer many benefits as electrode material in a sensing device. To further improve the analytical performance, doped graphene or derivatives of graphene such as reduced graphene oxide and their nanocomposites were explored as electrode materials. Herein, the advancements in graphene and its derivatives-based electrochemical sensors for analysis of food pollutants were summarized. Determinations of both organic (food colourants, pesticides, drugs, etc.) and inorganic pollutants (metal cations and anions) were considered. The influencing factors including nature of electrode materials and food pollutants, pH, electroactive surface area etc., on the sensing performances of modified electrodes were highlighted. The results of pollutant detection in food samples by the graphene-based electrode have also been outlined. Lastly, conclusions and current challenges in effective real sample detection were presented.

Natural deep eutectic solvent: A novelty alternative as multi-walled carbon nanotubes dispersing agent for the determination of paracetamol in urine.

This work reports for the first time the analytical performance of glassy carbon electrodes (GCE) modified with a dispersion of multi-wall carboxylated carbon nanotubes (MWCNTs-COOH) using a mixture of a natural deep eutectic solvent (NADES - LGH/lactic acid-glucose-water), ethylene glycol (EG) and water (GCE/MWCNT-LGH-EG) for the determination and N-(4-hydroxyphenyl) acetamide (paracetamol) (APAP) in urine samples. The optimization of both dispersion and measurement conditions was carried out using experimental design. The modified electrode exhibited enhanced current responses, demonstrating excellent electrochemical response towards APAP oxidation compared to MWCNTs-LGH, MWCNTs-EG, MWCNTs-H2O-EtOH and MWCNTs-H2O. The linear dependence between the anodic peak currents and the square root of scan rates over the range of 0.010-0.300 Vs-1 demonstrates that the electro oxidation of APAP occurs under diffusional control. The MWCNT-LGH-EG modified GCE displayed an analytical sensitivity of 10.72 mL µg-1 (r = 0.9994) and a detection limit of 100 ng mL-1 for the selective determination of APAP in urine samples. The proposed electrochemical sensor was successfully applied for quantifying APAP in urine samples in the presence of uric acid. In addition, the accuracy and precision of the method was contrasted against a HPLC reference method.

Synergistic Effect of Composite Nickel Phosphide Nanoparticles and Carbon Fiber on the Enhancement of Salivary Enzyme-Free Glucose Sensing.

An electrospinning method was used for the preparation of an in situ composite based on Ni2P nanoparticles and carbon fiber (FC). The material was tested for the first time against direct glucose oxidation reaction. The Ni2P nanoparticles were distributed homogeneously throughout the carbon fibers with a composition determined by thermogravimetric analysis (TGA) of 40 wt% Ni2P and 60 wt% carbon fiber without impurities in the sample. The electrochemical measurement results indicate that the GCE/FC/Ni2P in situ sensor exhibits excellent catalytic activity compared to the GCE/Ni2P and GCE/FC/Ni2P ex situ electrodes. The GCE/FC/Ni2P in situ sensor presents a sensitivity of 1050 µAmM-1cm-2 in the range of 5-208 µM and a detection limit of 0.25 µM. The sensor was applied for glucose detection in artificial saliva, with a low interference observed from normally coexisting electroactive species. In conclusion, our sensor represents a novel and analytical competitive alternative for the development of non-enzymatic glucose sensors in the future.

A descrição teórica da detecção eletroquímica do fármaco olanzapina, assistida pelo compósito do oxihidróxido de cobalto (III) com um corante esquaraínico

Introdução: a olanzapina é um dos fármacos antipsicóticos benzodiazepínicos mais usados no mundo. Apesar da sua eficiência, em concentrações excessivas, ela sói ser tóxica, como quaisquer outros fármacos desta classe. Assim, neste trabalho, se avaliou, pela primeira vez, a possibilidade da detecção eletroquímica do fármaco olanzapina, assistida pelo compósito do oxihidróxido de cobalto (III), emparelhado com o dióxido, com um corante esquaraínico. Método: o modelo matemático trivariante correspondente inclui dois cenários de oxidação do fármaco, possíveis para o caso, incluindo a eletropolimerização indireta da molécula da benzodiazepina condensada, bem como a oxidação do fármaco pelo átomo do enxofre. Este modelo tem sido desenvolvido e analisado mediante a teoria de estabilidade linear e análise de bifurcações. Resultados e discussão: a análise do modelo há mostrado que a hibridez do mecanismo do processo eletroanalítico, aliada à composição e descomposição dos compostos iônicos aquando da sua realização, aumenta a probabilidade da ocorrência do comportamento oscilatório, em relação ao caso mais simples e mais comum. No entretanto, a instabilidade oscilatória se realiza nos valores dos parâmetros, que estão além do limite de detecção. Por sua vez, o estado estacionário se obtém e se mantém facilmente, indicando um processo eletroanalítico eficiente, controlado pela difusão do analito. Conclusões: trata-se de um processo eletroanalítico eficiente, em que o composto de cobalto funciona como substância ativa, e o corante desempenha o papel de mediador

SUMMARY Introduction: olanzapine is one of the most used antipsychotic drugs in the world. Although it is efficient, it may be toxic in excess. Therefore, in this work the possibility of olanzapine electrochemical determination over an electrode, modified by the cobalt (III) oxyhydroxide in pair with its dioxide in a composite with squaraine dye. Methods: the trivariant correspondent mathematical model includes two scenarios of the drug oxidation, possible for the case, including the indirect electropolymerization of the condensed benzodiazepine molecule, like also its oxidation by sulfur atom. This model has been developed and analyzed by means of stability theory and bifurcation analysis. Results and discussion: the analysis of the model has shown that the mechanism hybridity of the electroanalytical process, alongside with the formation and decomposition of ionic compounds during its realization, augments the possibility for the oscillatory behavior realization, relatively to the simplest and commonest case. Nevertheless, the oscillatory instability is realized in parameter values far beyond the detection limit. On the other hand, the stable steady-state is easy to obtain and maintain, indicating an efficient electroanalytical process, controlled by the analyte diffusion. Conclusions: the electroanalytical process is efficient. The cobalt compound is acting as an active substance, and the dye is the mediator.

Introducción: la olanzapina es uno de los fármacos antipsicóticos más utilizados en el mundo. Aunque es eficaz, puede resultar tóxico en exceso. Por tanto, en este trabajo se plantea la posibilidad de la determinación electroquímica de olanzapina sobre un electrodo, modificado por el oxihidróxido de cobalto (III) en pareja con su dióxido en un composito con colorante de escuaraína. Métodos: el modelo matemático correspondiente incluye dos escenarios de oxidación del fármaco, posibles para el caso, que incluyen la electropolimerización indirecta de la molécula de benzodiazepina condensada, así como su oxidación por átomo de azufre. Este modelo ha sido desarrollado y analizado mediante teoría de estabilidad y análisis de bifurcación. Resultados y discusión: el análisis del modelo ha demostrado que el mecanismo de hibridación del proceso electroanalítico, junto con la formación y descomposición de compuestos iónicos durante su realización, aumenta la posibilidad de realización del comportamiento oscilatorio, relativamente al caso más simple y común. Sin embargo, la inestabilidad oscilatoria se realiza en valores de parámetros mucho más allá del límite de detección. Por otro lado, el estado estacionario estable es fácil de obtener y mantener, lo que indica un proceso electroanalítico eficiente, controlado por la difusión del analito. Conclusiones: el proceso electroanalítico es eficiente. El compuesto de cobalto actúa como sustancia activa y el colorante es el mediador.

Sandpaper-based electrochemical devices assembled on a reusable 3D-printed holder to detect date rape drug in beverages.

This study describes the development of a new electrochemical paper-based analytical device (ePAD) on alumina sandpaper substrate through a pencil-drawing process for square wave voltammetry measurements of midazolam maleate used as a "date rape drug" in beverages. The proposed ePAD was assembled on a reusable 3D printed holder to delimit its geometric area and ensure better robustness. The ePAD was characterized by scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy and Raman spectroscopy. The direct drawing of ePADs on sandpaper platforms through a graphite pencil has offered suitable repeatability (RSD = 1.0%) and reproducibility (RSD = 4.0%) using [Fe(CN)6]4- as redox probe. The proposed ePAD provided linear behaviour in the midazolam maleate concentration range between 2.5 and 150 mg L-1 and a limit of detection of 2.0 mg L-1. The feasibility of the ePAD for forensic application was successfully demonstrated through the detection of midazolam in different beverages (water, beer, liquor, and vodka). The intended application revealed low interference of other compounds present in beverages. Based on the achieved results, the proposed ePAD has offered great accuracy with no statistical difference at 95% confidence level from the data recorded by high performance liquid chromatography. The operational simplicity and the robustness ensured by the assembling on a reusable 3D printed holder make the ePAD drawn on sandpaper platform a powerful and promising analytical tool for the analysis of "date rape drugs" opening new possibilities for on-site forensic investigations.

Biomimetic electrochemical sensors: New horizons and challenges in biosensing applications.

The urge to meet the ever-growing needs of sensing technology has spurred research to look for new alternatives to traditional analytical methods. In this scenario, the glucometer is the flagship of commercial electrochemical sensing platforms, combining selectivity, reliability and portability. However, other types of enzyme-based biosensors seldom achieve the market, in spite of the large and increasing number of publications. The reasons behind their commercial limitations concern enzyme denaturation, and the high costs associated with procedures for their extraction and purification. In this sense, biomimetic materials that seek to imitate the desired properties of natural enzymes and biological systems have come out as an appealing path for robust and sensitive electrochemical biosensors. We herein portray the historical background of these biomimicking materials, covering from their beginnings until the most impactful applications in the field of electrochemical sensing platforms. Throughout the discussion, we present and critically appraise the major benefits and the most significant drawbacks offered by the bioinspired systems categorized as Nanozymes, Synzymes, Molecularly Imprinted Polymers (MIPs), Nanochannels, and Metal Complexes. Innovative strategies of fabrication and challenging applications are further reviewed and evaluated. In the end, we ponder over the prospects of this emerging field, assessing the most critical issues that shall be faced in the coming decade.

Electrochemical Sensors Based on Conducting Polymers for the Aqueous Detection of Biologically Relevant Molecules.

Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.