Electrochemical Activation of LiGaO2: Implications for Ga-Doped Garnet Solid Electrolytes in Li-Metal Batteries.

Ga-doped Li7La3Zr2O12 garnet solid electrolytes exhibit the highest Li-ion conductivities among the oxide-type garnet-structured solid electrolytes, but instabilities toward Li metal hamper their practical application. The instabilities have been assigned to direct chemical reactions between LiGaO2 coexisting phases and Li metal by several groups previously. Yet, the understanding of the role of LiGaO2 in the electrochemical cell and its electrochemical properties is still lacking. Here, we are investigating the electrochemical properties of LiGaO2 through electrochemical tests in galvanostatic cells versus Li metal and complementary ex situ studies via confocal Raman microscopy, quantitative phase analysis based on powder X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron energy loss spectroscopy. The results demonstrate considerable and surprising electrochemical activity, with high reversibility. A three-stage reaction mechanism is derived, including reversible electrochemical reactions that lead to the formation of highly electronically conducting products. The results have considerable implications for the use of Ga-doped Li7La3Zr2O12 electrolytes in all-solid-state Li-metal battery applications and raise the need for advanced materials engineering to realize Ga-doped Li7La3Zr2O12for practical use.

Management of functional constipation-associated halitosis: a retrospective study.

The features of functional constipation (FC)-associated halitosis were identified in the author's previous report. In this report, the author aimed to further investigate its treatment and efficacy. This retrospective study reviewed 100 FC patients, including 82 (82%) halitosis patients and 18 (18%) non-halitosis patients. They underwent the organoleptic test (OLT) to diagnose halitosis, and the organoleptic score (OLS) (0-5) was used to evaluated halitosis severity. The Cleveland Clinical Constipation Score (CCCS) (0-30) was used to evaluate FC severity. Patients were treated with the laxative polyethylene glycol electrolyte powder (PGEP) for four weeks. These tests were performed before and after treatment. The author found that, before treatment, the CCCS was 20.00 (18.00-23.00) for all patients, 21.00 (19.00-24.00) for halitosis patients, and 18.00 (17.00-18.25) for non-halitosis patients. A significant difference was observed between halitosis patients and non-halitosis patients (P < 0.001). The OLS for halitosis patients was 3.00 (3.00-4.00). A positive correlation (r = 0.814, 95% CI: 0.732-0.872, P < 0.001) was found between OLS and CCCS. A CCCS ≥18 predicted over 50% probability of halitosis. After treatment, the CCCS significantly decreased to 11.50 (6.00-14.75) (P < 0.001), and OLS significantly decreased to 1.00 (0.00-2.00) (P < 0.001). A positive correlation (r = 0.770, 95% CI: 0.673-0.841, P < 0.001) persisted between OLS and CCCS. A pre-treatment CCCS ≥21 predicted over 50% probability of post-treatment halitosis, while a post-treatment CCCS ≥12 predicted over 50% probability of post-treatment halitosis. The author concludes that the severity of FC parallels the severity of FC-associated halitosis, and can predict the probability of halitosis. Laxative treatment with PGEP is effective in improving FC-associated halitosis.

Clinical factors associated with hyponatremia correction during treatment with oral Urea.

BACKGROUND AND HYPOTHESIS: Oral urea is being used more commonly to treat hyponatremia, but factors contributing to the correction rate are unknown. We hypothesized that clinically relevant factors can be identified to help guide hyponatremia correction with oral urea. METHODS: Retrospective study in two university hospitals including hospitalized patients with hyponatremia (plasma sodium < 135 mmol/L) treated with oral urea. Linear mixed-effects models were used to identify factors associated with hyponatremia correction. Rates of overcorrection, osmotic demyelination and treatment discontinuation were also assessed. RESULTS: We included 161 urea treatment episodes in 140 patients (median age 69 years, 46% females, 93% syndrome of inappropriate antidiuresis). Oral urea succeeded fluid restriction in 117 treatment episodes (73%), was combined with fluid restriction in 104 treatment episodes (65%) and was given as only treatment in 27 treatment episodes (17%). A median dose of 30 grams/day of urea for 4 days (interquartile range 2-7 days) increased plasma sodium from 127 to 134 mmol/L and normalized hyponatremia in 47% of treatment episodes. Older age (ß 0.09, 95%CI 0.02 to 0.16), lower baseline plasma sodium (ß -0.65, 95%CI -0.78 to -0.62), and higher cumulative urea dose (ß 0.03, 95%CI -0.02 to -0.03) were independently associated with a greater rise in plasma sodium. Concurrent fluid restriction was associated with a greater rise in plasma sodium only during the first 48 h of treatment (ß 1.81, 95%CI 0.40 to 3.08). Overcorrection occurred in 5 cases (3%), no cases of osmotic demyelination were identified, and oral urea was discontinued in 11 cases (11%) due to side-effects. CONCLUSION: During treatment with oral urea, older age, higher cumulative dose, lower baseline plasma sodium and initial fluid restriction are associated with a greater correction rate of hyponatremia. These factors may guide clinicians to achieve a gradual correction of hyponatremia with oral urea.

An Electrolyte Engineered Homonuclear Copper Complex as Homogeneous Catalyst for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries suffer from severe polysulfide shuttle, retarded sulfur conversion kinetics and notorious lithium dendrites, which has curtailed the discharge capacity, cycling lifespan and safety. Engineered catalysts act as a feasible strategy to synchronously manipulate the evolution behaviors of sulfur and lithium species. Herein, a chlorine bridge-enabled binuclear copper complex (Cu-2-T) is in situ synthesized in electrolyte as homogeneous catalyst for rationalizing the Li-S redox reactions. The well-designed Cu-2-T provides completely active sites and sufficient contact for homogeneously guiding the Li2S nucleation/decomposition reactions, and stabilizing the lithium working interface according to the synchrotron radiation X-ray 3D nano-computed tomography, small angle neutron scattering and COMSOL results. Moreover, Cu-2-T with the content of 0.25 wt% approaching saturated concentration in electrolyte further boosts the homogeneous optimization function in really operated Li-S batteries. Accordingly, the capacity retention of the Li-S battery is elevated from 51.4% to 86.3% at 0.2 C, and reaches 77.0% at 1.0 C over 400 cycles. Furthermore, the sulfur cathode with the assistance of Cu-2-T realizes the stable cycling under the practical scenarios of soft-packaged pouch cell and high sulfur loading (6.5 mg cm-2 with the electrolyte usage of 4.5 µL mgS -1).

Suppressing Formation of Zn─Mn─O Phases by In Situ Ti Decoration of MnO2 for Long Lifespan MnO2-Zn Battery.

Mildly-acidic MnO2-Zn batteries are considered as a promising alternative for large-scale energy storage systems for their low toxicity, high safety, and low cost. Though, the degradation of MnO2 with cycling still hinders the further development of the batteries. In this study, it is observed that the decrease in available capacity of MnO2 with charge and discharge is accompanied by a structural transformation with the emergence of Zn─Mn─O phases. An electrodeposition test indicates that the Zn─Mn─O phase is formed from a co-precipitation of Zn and Mn during the charge process. Further, the structural change of MnO2 is suppressed and its cycle stability is improved with the addition of TiOSO4 as a facile electrolyte additive. As a result, under a current of 1200 mA g-1, the MnO2 electrode still gives a capacity of 230 mAh g-1 for over 1500 cycles. Capacity retention is 75% after 10 000 cycles under a current rate of 4800 mA g-1. These findings provide fundamental insights on the degradation mechanism of MnO2 and a new strategy to improve the electrochemical performance of aqueous MnO2-Zn batteries.

Dual-Function Alloying Nitrate Additives Stabilize Fast-Charging Lithium Metal Batteries.

Lithium metal is regarded as the "holy grail" of lithium-ion battery anodes due to its exceptionally high theoretical capacity (3800 mAh g-1) and lowest possible electrochemical potential (-3.04 V vs Li/Li+); however, lithium suffers from the dendritic formation that leads to parasitic reactions and cell failure. In this work, we stabilize fast-charging lithium metal plating/stripping with dual-function alloying M-nitrate additives (M: Ag, Bi, Ga, In, and Zn). First, lithium metal reduces M, forming lithiophilic alloys for dense Li nucleation. Additionally, nitrates form ionically conductive and mechanically stable Li3N and LiNxOy, enhancing Li-ion diffusion through the passivation layer. Notably, Zn-protected cells demonstrate electrochemically stable Li||Li cycling for 750+ cycles (2.0 mA cm-2) and 140 cycles (10.0 mA cm-2). Moreover, Zn-protected Li||Lithium Iron Phosphate full-cells achieve 134 mAh g-1 (89.2% capacity retention) after 400 cycles (C/2). This work investigates a promising solution to stabilize lithium metal plating/stripping for fast-charging lithium metal batteries.

Trace Small Molecular/Nano-Colloidal Multiscale Electrolyte Additives Enable Ultra-Long Lifespan of Zinc Metal Anodes.

Electrolyte additives are efficient to improve the performance of aqueous zinc-ion batteries (AZIBs), yet the current electrolyte additives are limited to fully water-soluble additives (FWAs) and water-insoluble additives (WIAs). Herein, trace slightly water-soluble additives (SWAs) of zinc acetylacetonate (ZAA) were introduced to aqueous ZnSO4 electrolytes. The SWA system of ZAA is composed of a FWA part and a WIA part in a dynamic manner of dissolution equilibrium. The FWA part exists as soluble small molecules, which efficiently regulate Zn2+ ion solvation structure, while the WIA part exists as insoluble nano-colloids, which in-situ form a thick and robust solid electrolyte interface film on zinc metal anodes (ZMAs). Such small molecular/nano-colloidal multiscale electrolyte additives of ZAA are capable to not only improve ionic conductivity and transference number but also inhibit corrosion, hydrogen evolution, and Zn dendrite on ZMAs. The SWA-based Zn∥Zn half battery delivers a superb cumulative plating capacity of 15 Ah cm-2 under 1 mAh cm-2 and 20 mA cm-2, and the SWA-based NH4V4O10∥Zn pouch cell obtains a capacity retention of 67.8% within 4000 cycles under 4 A g-1. The study provides innovative insights for rational design of electrolyte additives, which may pave the way for the practicality of AZIBs.

Structural Complexities in Sodium Ion Conductive Antiperovskite Revealed by Cryogenic Transmission Electron Microscopy.

We use low-dose cryogenic transmission electron microscopy (cryo-TEM) to investigate the atomic-scale structure of antiperovskite Na2NH2BH4 crystals by preserving the room-temperature cubic phase and carefully monitoring the electron dose. Via quantitative analysis of electron beam damage using selected area electron diffraction, we find cryogenic imaging provides 6-fold improvement in beam stability for this solid electrolyte. Cryo-TEM images obtained from flat crystals revealed the presence of a new, long-range-ordered supercell with a cubic phase. The supercell exhibits doubled unit cell dimensions of 9.4 Å × 9.4 Å as compared to the cubic lattice structure revealed by X-ray crystallography of 4.7 Å × 4.7 Å. The comparison between the experimental image and simulated potential map indicates the origin of the supercell is a vacancy ordering of sodium atoms. This work demonstrates the potential of using cryo-TEM imaging to study the atomic-scale structure of air- and electron-beam-sensitive antiperovskite-type solid electrolytes.

Improving the Oxygen Evolution Reaction Kinetics in Zn-Air Battery by Iodide Oxidation Reaction.

Zinc-air batteries (ZABs) have garnered considerable attention as a highly promising contender in the field of energy storage and conversion. Nevertheless, their performance is considerably impeded by the proliferation of dendrites on the Zinc anode and the slow kinetics of the redox reaction on the air cathode. Herein, taking Ag30%@LaCoO3 (Ag30%@LCO) heterojunction catalyst as the cathode, it is demonstrated that adding KI additives to the alkaline electrolyte can not only enhance the oxygen electrocatalytic reaction but also inhibit the formation of zinc anode dendrites, thereby achieving a comprehensive improvement in the performance of ZABs. Under the action of the KI additive, the optimized Ag30%@LCO catalyst shows a decreased overpotential from 460 to 220 mV at j = 10 mA cm-2, while the assembled ZAB shows reduced charging potential (1.8 V), and long cycle stability (180 h). Furthermore, the morphology characterization results indicate a reduction in dendrites on the Zn anode. Both experimental and calculated results indicate that the presence of I- as a reaction modifier alters the trajectory of the conventional oxygen evolution reaction, resulting in a more thermodynamically favorable pathway. The introduction of KI additives as electrolytes provides a straightforward approach to developing comprehensively improved ZABs.

Unlocking 4.9 V Quasi-Solid-State Lithium Metal Battery via Solvent Screening and Interfacial Manipulation.

Parlous structure integrity of the cathode and erratic interfacial microdynamics under high potential take responsibility for the degradation of solid-state lithium metal batteries (LMBs). Here, high-voltage LMBs have been operated by modulating the polymer electrolyte intrinsic structure through an intermediate dielectric constant solvent and further inducing the gradient solid-state electrolyte interphase. Benefiting from the chemical adsorption between trimethyl phosphate (TMP) and the cathode, the gradient interphase rich in LiPFxOy and LiF is induced, thereby ensuring the structural integrity and interface compatibility of the commercial LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode even at the 4.9 V cutoff voltage. Eventually, the specific capacity of NCM811|Li full cell based on TMP-modulated polymer electrolyte increased by 27.7% from 4.5 to 4.9 V. Such a universal screening method of electrolyte solvents and its derived electrode interfacial manipulation strategy opens fresh avenues for quasi-solid-state LMBs with high specific energy.

Carbonate Ester-Based Sodium Metal Battery with High-Capacity Retention at -50°C Enabled by Weak Solvents and Electrodeposited Anode.

Sodium metal batteries (SMBs) have received increasing attention due to the abundant sodium resources and high energy density, but suffered from the sluggish interfacial kinetic and unstable plating/stripping of sodium anode at low temperature, especially when matched with ester electrolytes. Here, we develop a stable ultra-low-temperature SMBs with high-capacity retention at -50°C in a weak solvated carbonate ester-based electrolyte, combined with an electrodeposited Na (Cu/Na) anode. The Cu/Na anode with electrochemically activated "deposited sodium" and stable inorganic-rich solid electrolyte interphase (SEI) was favor for the fast Na+ migration, therefore accelerating the interfacial kinetic process. As a result, the Cu/Na || NaCrO2 battery exhibited the highest capacity retention (compared to room-temperature capacity) in carbonate ester-based SMBs (98.05% at -25°C, 91.3% at -40°C, 87.9% at -50°C, respectively). The cyclic stability of 350 cycles at -25°C with a high energy efficiency of 96.15% and 70 cycles at -50°C can be achieved. Even in chill atmospheric environment with the fluctuant temperature, the battery can still operate over one month. This work provides a new opportunity for the development of low-temperature carbonate ester-based SMBs.

The zinc ion concentration dynamically regulated by an ionophore in the outer Helmholtz layer for stable Zn anode.

The Zn dendrite limits the practical application of aqueous zinc-ion batteries in the large-scale energy storage systems. To suppress the growth of Zn dendrites, a zinc ionophore of hydroxychloroquine (defined as HCQ) applied in vivo treatment is investigated as the electrolyte additive. HCQ dynamically regulates zinc ion concentration in the outer Helmholtz layer, promoting even Zn plating at the anode/electrolyte interface. This is evidenced by the scanning electron microscopy, which delivers planar Zn plating after cycling. It is further supported by the X-ray diffraction spectroscopy, which reveals the growth of Zn (002) plane. Additionally, the reduced production of H2 during Zn plating/stripping is detected by the in-situ differential electrochemical mass spectrometry (DEMS), which shows the resistance of Zn (002) to hydrogen evolution reaction. The mechanism of dynamic regulation for zinc ion concentration is demonstrated by the in-situ optical microscopy. The hydrated zinc ion can be further plated more rapidly to the uneven location than the case in other regions, which is resulted from the dynamic regulation for zinc ion concentration. Therefore, the uniform Zn plating is formed. A cycling life of 1100 h is exhibited in the Zn||Zn symmetric cell at 1.6 mA cm-2 with the capacity of 1.6 mAh cm-2. The Zn||Cu battery exhibits a cycling life of 200 cycles at 4 mA cm-2 with a capacity of 4 mAh cm-2 and the average Coulombic efficiency is larger than 99 %. The Zn||VO2 battery with HCQ modified electrolyte can operate for 1500 cycles at 4 A g-1 with a capacity retention of 90 %. This strategy in the present work is wished to advance the development of zinc-ion batteries for practical application.

Ni-Rich Layered Oxide Cathodes/Sulfide Electrolyte Interface in Solid-State Lithium Battery.

Because of the high specific capacity and low cost, Ni-rich layered oxide (NRLO) cathodes are one of the most promising cathode candidates for the next high-energy-density lithium-ion batteries. However, they face structure and interface instability challenges, especially the battery safety risk caused by using an intrinsic flammable organic liquid electrolyte. In this regard, a solid electrolyte with high safety is of great significance to promote the development of energy storage. Among them, sulfide electrolytes are considered to be the most potential substitutes for liquid electrolytes because of their high ionic conductivity and good processing properties. Nevertheless, the interfacial incompatibility between the sulfide electrolyte and NRLO cathode is the critical challenge for high-performance sulfide all-solid-state lithium batteries (ASSLBs). In this review, we summarize the problems of the Ni-rich cathode/sulfide solid electrolyte interface and the strategies to improve the interface stability. On the basis of these insights, we highlight the scientific problems and technological challenges that need to be resolved urgently and propose several potential directions to further improve the interface stability. The objective of this study is to provide a comprehensive understanding and insightful recommendations for the enhancement of the sulfide ASSLBs with NRLO cathode.

Adrenal Mass and Hypokalaemia: The Zebra Among Horses.

Pheochromocytoma rarely presents with unexplained hypokalaemia, although there are some case reports in the literature. The mechanism behind this could be the increased cellular potassium uptake promoted by beta-2-adrenoreceptor hyperactivation and insulin resistance. We present the case of a 68-year-old hypertensive female patient with a unilateral adrenal mass discovered on angio-CT and typical signs of adrenergic hyperstimulation (hypertensive crisis, headache, and sweating) associated with multiple arrhythmic episodes but with normal plasma and urinary catecholamine levels. During the work-up for hormonal hypersecretion and the cessation of anti-aldosterone medication, the patient presented resistant hypokalaemia. Due to uncorrectable hypokalaemia, we were unable to perform hormonal investigations for primary hyperaldosteronism and referred the patient for laparoscopic adrenalectomy. The histological diagnosis revealed left pheochromocytoma. Postoperatively, the patient experienced rebound hyperkalaemia. In a patient with a unilateral adrenal mass and hypokalaemia, besides primary hyperaldosteronism and adrenocorticotropic hormone-independent hypercortisolism, a possible pheochromocytoma should be ruled out as well by the clinician before surgery.

Across Interfacial Li+ Conduction Accelerated by a Single-Ion Conducting Polymer in Ceramic-Rich Composite Electrolytes for Solid-State Batteries.

Composite electrolytes have been accepted as the most promising species for solid-state batteries, exhibiting the synergistic advantages of solid polymer electrolytes (SPEs) and solid ceramic electrolytes (SCEs). Unfortunately, the interrupted Li+ conduction across the SPE and SCE interface hinders the ionic conductivity improvement of composite electrolytes. In our study on a ceramic-rich composite electrolyte (CRCE) membrane composed of borate polyanion-based lithiated poly(vinyl formal) (LiPVFM) and Li1.3Al0.3Ti1.7(PO4)3 (LATP) particles, it is found that the strong interaction between the polyanions in LiPVFM and LATP particles results in a uniform distribution of ceramic particles at a high proportion of 50 wt % and good robustness of the electrolyte membrane with a Young's modulus of 9.20 GPa. More importantly, ab initio molecular dynamics simulation and experimental results demonstrate that Li+ conduction across the SPE and SCE interface is induced by the polyanion-based polymer due to its high lithium-ion transference number and similar Li+ diffusion coefficient with the SCE. Therefore, the unblocked Li+ conduction among ceramic particles dominates in the CRCE membrane with a high ionic conductivity of 6.60 × 10-4 S cm-1 at 25 °C, a lithium-ion transference number of 0.84, and a wide electrochemical stable window of 5.0 V (vs Li/Li+). Consequently, the high nickel ternary cathode LiNi0.8Mn0.1Co0.1O2-based batteries with CRCE deliver a high-rate capability of 135.08 mAh g-1 at 1.0 C and a prolonged cycle life of 100 cycles at 0.2 C between 3.0 and 4.3 V. The polyanion-induced Li+ conduction across the interface sheds new light on solving composite electrolyte problems for solid-state batteries.

Metal alkoxides: A new type of reversible anode materials for stable and high-rate lithium-ion batteries.

Metal-organic compounds have attracted significant attention for lithium-ion battery (LIB) anodes. However, their practical application is severely hindered by the poor structural stability and sluggish Li+ reaction kinetics. Herein, we proposed a new type of metal-organic compound, metal alkoxides, for high-performance LIBs. A series of metal-alkoxide/graphene composites with different transition metal centers and alkoxide anions are prepared to investigate the structural stability, Li-storage ability, and Li+ diffusion kinetics. The results reveal that the metal centers and alkoxide anions have significant influence on the structural stability, molar mass, and electronic structures, which are highly related to the Li-storage performance. Among them, Co-EG/rGO (EG represents the ethylene glycol anion) delivers the best performance involving high specific capacity (975 mAh g-1 at 0.2 A g-1), excellent rate capability (400.8 mAh g-1 at 10 A g-1), and stable cycling performance (86.8 % capacity retention after 600 cycles) due to its stable structure, smaller molar mass, and favorable electronic structure. Moreover, the Li-storage mechanism and solid electrolyte interphase (SEI) evolution of the Co-EG/rGO electrode are studied in detail through multiple ex-situ/in-situ characterizations. This work provides a new type of metal alkoxide anode material for high-rate and long-life LIBs toward practical energy applications.

"Seaweed Structure" design for solid gel electrolyte with hydroxide ion conductivity enabling flexible zinc air batteries.

The construction of solid-state electrolytes for flexible zinc-air batteries is extremely challenging. A flexible and highly conductive solid electrolyte designed with a "seaweed structure" is reported in this work. Sodium alginate serves as the backbone to form a robust network structure, and the grafted quaternary ammonium groups provide channels for rapid ion transport, achieving excellent flexibility and hydroxide conductivity. The conductivity of the modified electrolyte membrane (QASA) is 5.23 × 10-2 S cm-1 at room temperature and reaches up to 8.51 × 10-2 S cm-1 at 75 °C. In the QASA based battery, bending at any angle is realized, and the power density is up to 57.28 mW cm-2. This work provides a new way to prepare high conductivity, green solid-state zinc-air batteries, and opens up a research line of thought for flexible energy storage materials.

Research on the Influence of Core Sensing Components on the Performance of Galvanic Dissolved Oxygen Sensors.

The galvanic dissolved oxygen sensor finds widespread applications in multiple critical fields due to its high precision and excellent stability. As its core sensing components, the oxygen-permeable membrane, electrode, and electrolyte significantly impact the sensor's performance. To systematically investigate the comprehensive effects of these core sensing components on the performance of galvanic dissolved oxygen sensors, this study selected six types of oxygen-permeable membranes made from two materials (Perfluoroalkoxy Polymer (PFA) and Fluorinated Ethylene Propylene Copolymer (FEP)) with three thicknesses (0.015 mm, 0.03 mm, and 0.05 mm). Additionally, five concentrations of KCl electrolyte were configured, and four different proportions of lead-tin alloy electrodes were chosen. Single-factor and crossover experiments were conducted using the OxyGuard dissolved oxygen sensor as the experimental platform. The experimental results indicate that under the same membrane thickness conditions, PFA membranes provide a higher output voltage compared to FEP membranes. Moreover, the oxygen permeability of FEP membranes is more significantly affected by temperature. Furthermore, the oxygen permeability of the membrane is inversely proportional to its thickness; the thinner the membrane, the better the oxygen permeability, resulting in a corresponding increase in sensor output voltage. When the membrane thickness is reduced from 0.05 mm to 0.015 mm, the sensor output voltage for PFA and FEP membranes increases by 86% and 74.91%, respectively. However, this study also observed that excessively thin membranes might compromise measurement accuracy. In a saturated, dissolved oxygen environment, the sensor output voltage corresponding to the six oxygen-permeable membranes used in the experiment exhibits a highly linear inverse relationship with temperature (correlation coefficient ≥ 98%). Meanwhile, the lead-tin ratio of the electrode and electrolyte concentration have a relatively minor impact on the sensor output voltage, demonstrating good stability at different temperatures (coefficient of variation ≤ 0.78%). In terms of response time, it is directly proportional to the thickness of the oxygen-permeable membrane, especially for PFA membranes. When the thickness increases from 0.015 mm to 0.05 mm, the response time extends by up to 2033.33%. In contrast, the electrode material and electrolyte concentration have a less significant effect on response time. To further validate the practical value of the experimental results, the best-performing combination of core sensing components from the experiments was selected to construct a new dissolved oxygen sensor. A performance comparison test was conducted between this new sensor and the OxyGuard dissolved oxygen sensor. The results showed that both sensors had the same response time (49 s). However, in an anaerobic environment, the OxyGuard sensor demonstrated slightly higher accuracy by 2.44%. This study not only provides a deep analysis of the combined effects of oxygen-permeable membranes, electrodes, and electrolytes on the performance of galvanic dissolved oxygen sensors but also offers scientific evidence and practical guidance for optimizing sensor design.

Highly Conductive and Stable Composite Polymer Electrolyte with Boron Nitride Nanotubes for All-Solid-State Lithium Metal Batteries.

All-solid-state lithium metal batteries (ASSLMBs) have emerged as the most promising next-generation energy storage devices. However, the unsatisfactory ionic conductivity of solid electrolytes at room temperature has impeded the advancement of solid-state batteries. In this work, a multifunctional composite solid electrolyte (CSE) is developed by incorporating boron nitride nanotubes (BNNTs) into polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP). BNNTs, with a high aspect ratio, trigger the dissociation of Li salts, thus generating a greater population of mobile Li+, and establishing long-distance Li+ transport pathways. PVDF-HFP/BNNT exhibits a high ionic conductivity of 8.0 × 10-4 S cm-1 at room temperature and a Li+ transference number of 0.60. Moreover, a Li//Li symmetric cell based on PVDF-HFP/BNNT demonstrates robust cyclic performance for 3400 h at a current density of 0.2 mA cm-2. The ASSLMB formed from the assembly of PVDF-HFP/BNNT with LiFePO4 and Li exhibits a capacity retention of 93.2% after 850 cycles at 0.5C and 25 °C. The high-voltage all-solid-state LiCoO2/Li cell based on PVDF-HFP/BNNT also exhibits excellent cyclic performance, maintaining a capacity retention of 96.4% after 400 cycles at 1C and 25 °C. Furthermore, the introduction of BNNTs is shown to enhance the thermal conductivity and flame retardancy of the CSE.

Diagnostic Protocols for Evaluating the Degradation Mechanisms in Gel-Polymer Lithium Batteries.

Gel polymer electrolytes (GPEs) present a promising alternative to standard liquid electrolytes (LE) for Lithium-ion Batteries (LIBs) and Lithium Metal Batteries bridging the advantages of both liquid and solid polymer electrolytes. However, their cycle life still lags behind that of standard LIBs, and their degradation mechanisms remain poorly understood. A significant challenge is the need for specific diagnostic protocols to systematically study the degradation mechanisms of GPE-based cells. Challenges include the separation of cell components and effective washing, as well as the study of the solid electrolyte interfaces, all complicated by the semi-solid nature of GPEs. This paper provides a brief review of existing literature and proposes a comprehensive set of diagnostic tools for dismantling and evaluating the degradation of GPE-based LIBs. Finally, these methods and recommendations are applied to LiNi0.5Mn1.5O4 (LNMO)-graphite cells, revealing electrolyte oxidation as a major source of cell degradation.