Combining slow-release fertilizer and plastic film mulching reduced the carbon footprint and enhanced maize yield on the Loess Plateau.

Agricultural practices significantly contribute to greenhouse gas (GHG) emissions, necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production. Plastic film mulching is commonly used in the Loess Plateau region. Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity. Combining these techniques represents a novel agricultural approach in semi-arid areas. However, the impact of this integration on soil carbon storage (SOCS), carbon footprint (CF), and economic benefits has received limited research attention. Therefore, we conducted an eight-year study (2015-2022) in the semi-arid northwestern region to quantify the effects of four treatments [urea supplied without plastic film mulching (CK-U), slow-release fertilizer supplied without plastic film mulching (CK-S), urea supplied with plastic film mulching (PM-U), and slow-release fertilizer supplied with plastic film mulching (PM-S)] on soil fertility, economic and environmental benefits. The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions (≥71.97%). Compared to other treatments, PM-S increased average grain yield by 12.01%-37.89%, water use efficiency by 9.19%-23.33%, nitrogen accumulation by 27.07%-66.19%, and net return by 6.21%-29.57%. Furthermore, PM-S decreased CF by 12.87%-44.31% and CF per net return by 14.25%-41.16%. After eight years, PM-S increased SOCS (0-40 cm) by 2.46%, while PM-U decreased it by 7.09%. These findings highlight the positive effects of PM-S on surface soil fertility, economic gains, and environmental benefits in spring maize production on the Loess Plateau, underscoring its potential for widespread adoption and application.

Correlating grain yield with irrigation in a spatio-temporal context on the North China Plain.

Irrigation plays a crucial role in enhancing agricultural productivity. The spatiotemporal variability and correlation between historical irrigation and grain yield not only illuminate existing challenges in irrigation, but also offer valuable insights for formulating effective irrigation strategies, which have been previously overlooked. Taking the North China Plain (NCP) as a case study, this study aims to elucidate regional divergence patterns and the dynamic evolution of the spatiotemporal relationship between grain yield and irrigation through time series analysis, GIS spatial analysis, and geographically weighted regression (GWR). The findings reveal that grain yields are higher in the northern regions of NCP compared to the southern regions, with significant variations among prefecture-level cities; maize yields slightly surpass wheat yields. Moreover, there has been a noticeable decrease in irrigation across approximately 49 % of the areas since 2004. Spatial autocorrelation analysis indicates clear spatial aggregation for both grains yields and irrigation. The coupled correlation between wheat yield and effective irrigation has shown a slight increase from 1990 to 2015, while that of maize has significantly decreased. The positive impact of irrigation on grain yield has nearly vanished since 2002. It is recommended to implement sprinkler irrigation in low-yield, low-irrigation areas in the south; deficit irrigation and water-saving technologies may benefit regions with medium yield and negative correlation with irrigation in central parts; maintaining current irrigation strategies is suggested for high-yield and high-irrigation regions. Additionally, relying solely on irrigation to boost yields is unsustainable; it is critical to adopt a combination of agricultural management practices along with planting high water-utilization efficient crop varieties. This study underscores the significance of developing rational irrigational strategies based on a comprehensive understanding of the intricate relationship between irrigation and grain yields-ensuring food security while sustaining agricultural water utilization.

Genotype-by-environment interaction and stability analysis of grain yield of bread wheat (Triticum aestivum L.) genotypes using AMMI and GGE biplot analyses.

Bread wheat is a vital staple crop worldwide; including in Ethiopia, but its production is prone to various environmental constraints and yield reduction associated with adaptation. To identify adaptable genotypes, a total of 12 bread wheat genotypes (G1 to G12) were evaluated for their genotype-environment interaction (GEI) and stability across three different environments for two years using Additive Main Effect and Multiplicative Interaction (AMMI) and genotype main effect plus genotype-by-environment interaction (GGE) biplots analysis. GEI is a common phenomenon in crop improvement and is of significant importance in genotype assessment and recommendation. According to combined analysis of variance, grain yield was considerably impacted by environments, genotypes, and GEI. AMMI and GGE biplots analysis also provided insights into the performance and stability of the genotypes across diverse environmental conditions. Among the 12 genotypes, G6 was selected by AMMI biplot analysis as adaptive and high-yielding genotype; G5 and G7 demonstrated high stability and minimal interaction with the environment, as evidenced by their IPCA1 values. G7 was identified as the most stable and high-yielding genotype. The GGE biplot's polygon view revealed that the highest grain yield was obtained from G6 in environment three (E3). E3 was selected as the ideal environment by the GGE biplot. The top three stable genotypes identified by AMMI stability value (ASV) were G5, G7, and G10, while the most stable genotype determined by Genotype Selection Index (GSI) was G7. Even though G6 was a high yielder, it was found to be unstable according to ASV and ranked third in stability according to GSI. Based on the study's findings, the GGE biplot genotype view for grain yield identified Tay genotype (G6) to be the most ideal genotype due to its high grain yield and stability in diverse environments. G7 showed similar characteristics and was also stable. These findings provide valuable insights to breeders and researchers for selecting high-yielding and stable, as well as high-yielding specifically adapted genotypes.

The effect of nitrogen-sulphur fertilizer with nitrification inhibitor on winter wheat (Triticum aestivum L.) nutrition.

The high input of nitrogen is often required in today's agriculture, especially for the most cultivated crops largely involved in human and animal nutrition, such as winter wheat. Nitrogen is a mobile nutrient in the soil, and the high doses of N are often associated with possible losses through volatilization or leaching. One of the possible options to increase nitrogen use efficiency is the application of fertilizers with inhibitors. The main objective of the presented three-year experiment established under the field conditions at the two experimental sites was to examine the effect of nitrogen-sulphur fertilizer (ammonium nitrate sulphate) with the inhibitors of nitrification (IN) (dicyandiamide and 1,2,4 triazole). In addition to the nitrogen content in two forms, this fertilizer also contains sulphur, which can possibly enhance the utilization of nitrogen due to their well-known synergy. The treatments included in the experiment were: 1. Unfertilized, 2. N technology 3. N + S technology and 4. N + S + IN. The total dose of applied N for every fertilized treatment was 159 kg/ha. Treatments 2 and 3 were fertilized with three split doses of N, treatment 4 was fertilized only two times due to the addition of IN (a higher dose of fertilizer in the second application). The results obtained from the three-year experiment showed a significantly higher yield of grain (8.18 t/ha) after the fertilization with N + S + IN in comparison with N + S (7.67 t/ha) and N (7.61 t/ha), which proved the positive effect of IN on nitrogen use efficiency during the vegetation. The differences between qualitative parameters of wheat grain (hectolitre weight, protein and gluten content) were evaluated as statistically insignificant for each fertilized treatment. This similar result is likely due to the IN application, which provided a continuous nitrogen supply during vegetation comparable to the three split nitrogen applications. Thus, our results showed, that the addition of IN to the higher dose of fertilizer applied earlier in the vegetation can provide comparable results in terms of quality to the technologies based on three split fertilizations. The three-year experiment established at two experimental sites has proved, that the application of ammonium sulphate nitrate fertilizers with IN in a higher dose is a better option to the commonly used nitrogen technology, which was also supported by the economic evaluation and the highest net profit.

Wheat yield and grain-filling characteristics due to cultivar replacement in the Haihe Plain in China.

Background: The Haihe Plain plays an important role in wheat production and food security in China and has experienced continuous cultivar replacement since the 1950s.This study assessed the evolution of the yield and grain-filling characteristics of the main winter wheat cultivars in the Haihe Plain over the last seven decades (1950s to date). Methods: Cultivar characterization indicated that the increase in yield was negatively affected by spike number and positively affected by the number of kernels per spike before the 2000s and kernel weight after the 2000s. Field trials were conducted across two ecological zones over two consecutive wheatgrowing seasons. The results showed that genetic gains in grain yield, spike number, and kernel weight during 1955 to 2021 were 0.629%, 0.574%, and 0.332% year-1 on a relative basis or 39.12 kg ha-1, 24,350 hm-2, and 0.15 g year-1 on an absolute basis, respectively. However, the increase in the kernel number per spike was not significant. Moreover, cultivar replacement explained 25.6%, 12.8%, and 37.5% of the total variance in grain yield, spike number, and kernel weight, respectively. In summary, during the initial grain-filling stage, wheat cultivar replacement led to the shortening of grain-filling duration and rapid grain-filling rate. However, a longer active grain-filling duration was produced by prolonged durations of rapid and late grain-filling. Additionally, the experimental year had a greater effect on the kernel number, which explained 53.2% of the total variance. Ultimately, modern wheat cultivars had a greater kernel weight. Results: Although the increase in kernel weight has affected grain yield during cultivar replacements in the Haihe Plain, the potential for further yield increase through kernel weight enhancement alone is limited. Consequently, future breeding efforts and cultivation practices should focus on improving spike traits and canopy architecture to enhance productivity.

Enhancing kernel oil and tailoring fatty acid composition by genomics-assisted selection for dgat1-2 and fatb genes in multi-nutrient-rich maize: new avenue for food, feed and bioenergy.

Enhancing maize kernel oil is vital for improving the bioavailability of fat-soluble vitamins. Here, we combined favourable alleles of dgat1-2 and fatb into parental lines of four multi-nutrient-rich maize hybrids (APTQH1, APTQH4, APTQH5 and APTQH7) using marker-assisted selection (MAS). Parental lines possessed favourable alleles of crtRB1, lcyE, vte4 and opaque2 genes. Gene-specific markers enabled successful foreground selection in BC1F1, BC2F1 and BC2F2, while background selection using genome-wide microsatellite markers (127-132) achieved 93% recurrent parent genome recovery. Resulting inbreds exhibited significantly higher oil (6.93%) and oleic acid (OA, 40.49%) and lower palmitic acid (PA, 14.23%) compared to original inbreds with elevated provitamin A (11.77 ppm), vitamin E (16.01 ppm), lysine (0.331%) and tryptophan (0.085%). Oil content significantly increased from 4.80% in original hybrids to 6.73% in reconstituted hybrids, making them high-oil maize hybrids. These hybrids displayed 35.70% increment in oil content and 51.56% increase in OA with 36.32% reduction in PA compared to original hybrids, while maintaining higher provitamin A (two-fold), vitamin E (nine-fold), lysine (two-fold) and tryptophan (two-fold) compared to normal hybrids. Lipid health indices showed improved atherogenicity, thrombogenicity, cholesterolaemic, oxidability, peroxidizability and nutritive values in MAS-derived genotypes over original versions. Besides, the MAS-derived inbreds and hybrids exhibited comparable grain yield and phenotypic characteristics to the original versions. The maize hybrids developed in the study possessed high-yielding ability with high kernel oil and OA, low PA, better fatty acid health and nutritional properties, higher multi-vitamins and balanced amino acids, which hold immense significance to address malnutrition and rising demand for oil sustainably in a fast-track manner.

The invertase gene PWIN1 confers chilling tolerance of rice at the booting stage via mediating pollen development.

Pollen fertility is a primary regulator of grain yield and is highly susceptible to cold and other environmental stress. We revealed the roles of rice cell wall invertase gene PWIN1 in pollen development and chilling tolerance. We uncovered its preferential expression in microspores and bicellular pollen and identified its knock-down and knock-out mutants. pwin1 mutants produced a higher proportion of abnormal pollen than wild-type plants. The contents of sucrose, glucose, and fructose were increased, while ATP content and primary metabolism activity were reduced in the mutant pollen. Furthermore, the loss of function of PWIN1 coincided with an increase in SnRK1 activity and a decrease in TOR activity. Under chilling conditions, pwin1 mutants displayed significantly reduced pollen viability and seed-setting rate, while overexpressing PWIN1 notably increased pollen viability and seed-setting rate as compared with the wild-type, indicating that PWIN1 is essential for rice pollen development and grain yield under cold stress. This study provides insights into the molecular mechanisms underlying rice pollen fertility during chilling stress, and a new module to improve chilling tolerance of rice at the booting stage by molecular design.

Effective multidimensional treatment identification of different chemical fertilizers: Response of insect dynamics and rice production.

Effective management of fertilizers is essential in influencing the prevalence of insects in rice (Oryza sativa L.) fields. Over two years (2019-20 and 2020-21), an experiment conducted at Bangladesh Rice Research Institute (BRRI), Habiganj, during the boro season aimed to identify the most effective multidimensional treatment (EMT) by testing various combinations of chemical fertilizers and its effect on rice insects. The goal was to optimize rice grain yield while minimizing harmful insect infestation and supporting natural enemies. Eight different chemical fertilizer applications were used as follows: T1 contained a full mix of nitrogen (N), phosphorus (P), potassium (K), and sulfur (S); T2 had PKS but lacked N; T3 had NKS but lacked P; T4 had NPS but lacked K; T5 had NPK but lacked S; T6 had KS but lacked N and P; T7 had PS but lacked N and K; and T8 lacked all four elements - N, P, K, and S. The relationship between the dynamics of harmful insects and natural enemies was highly positively correlated (r = 0.72 to 0.97). In two consecutive growing years, the 2020-21 season exhibited notably higher counts of harmful insects, with Rice Leafroller (RLR) dominating in the booting stage and White Backed Planthopper (WBPH) in mid-tillering, while Green Mirid Bug (GMB) prevailed among natural enemies across both stages, surpassing insect pest counts, notably GMB, Lady bird beetle (LBB), Carabid beetle (CDB), and Staphylinid (STD). However, the yield was notably higher in the 2019-20 growing season despite these pest pressures. Throughout the mid-tillering and booting stages, T1 consistently exhibited the highest average populations of harmful insects and natural enemies, while T7 demonstrated the lowest count of harmful insects, followed by T2 at both growth stages. Additionally, the highest grain yield (GY) was consistently recorded in T1, followed by T5, T6, and T3, with yields of 7.98 t/ha, 7.63 t/ha, 7.38 t/ha, and 7.33 t/ha, respectively. In both stages, beneficial insects prevailed over harmful ones in all fertilizer applications, with significant declines noted in T2 and T7. Factor analysis showed successful selection for EMT in the MGIDI index for all variables except INT and GY during the 2019-20 season, with selection differentials (SD) ranging from -0.10 to 8.29. However, in 2020-21, selection was achieved for all variables with SD ranging from 0.37 to 6.08. According to the MGIDI index, the top-ranked EMTs were identified as T4 and T3 for the 2019-20 period, and T3 and T5 for the 2020-21 period. The EMT shared in both years, T3, proved effective because of its positive impact on enhancing natural enemies throughout both periods (with SD ranging from 4.76 to 8.29 for 2019-20 and 3.03 to 6.08 for 2020-21), and its notable contribution to rice grain yield (SD = 0.37) in 2020-21. This study uniquely integrates EMT to optimize rice grain yield while simultaneously managing harmful insect infestations and supporting natural enemies, addressing a critical need in sustainable rice cultivation. The suggestion is to give preference to fertilizer application T3, which omits P but contains N and K, to improve rice grain yield and boost natural enemies, thereby reducing harmful insect infestation. Moreover, future investigations should concentrate on refining fertilizer blends to strike a harmony between maximizing yield and fostering ecological robustness in rice cultivation.

Nutrient requirements determined by grain yield and protein content to optimize N, P, and K fertilizer management in China.

Nutrient requirement for crop growth, defined as the amount of nutrient that crops take up from soil to produce a specific grain yield, is a key parameter in determining fertilizer application rate. However, existing studies primarily focus on identifying nitrogen (N), phosphorus (P), and potassium (K) requirements solely in relation to grain yield, neglecting grain protein content, a crucial index for wheat grain quality. Addressing this gap, we conducted multi-site, multi-cultivar, and multi-year field trials across three ecological regions of China from 2016 to 2020 to elucidate variations in nutrient requirements for grain yield and grain protein. The research findings revealed that wheat grain yield ranged from 4.1 to 9.3 Mg ha-1 (average 6.9 Mg ha-1) and grain protein content ranged from 98 to 157 g kg-1 (average 127 g kg-1) across the three regions. Notably, the N requirement exhibited a nonlinear correlation with the wheat grain yield but a linear increase with increasing grain protein, while the P and K requirements positively correlated with grain yield and protein content. Regression models were formulated to determine the nutrient requirements (MENR), enabling the prediction of N, P, and K requirements for leading cultivars with varying grain yields and protein contents. Implementing nutrient requirements based on MENR projections resulted in substantial reductions in fertilizer rates: 22.0 kg ha-1 N (10.7 %), 9.9 kg ha-1 P (20.2 %), and 8.1 kg ha-1 K (16.3 %). This translated to potential savings of 0.4 Mt. N, 0.23 Mt. P, and 0.17 Mt. K, consequently mitigating 5.5 Mt. CO2 greenhouse-gas emission and yielding an economic benefit of 0.8 billion US$ annually in China. These findings underscore the significance of considering grain yield and protein content in estimating nutrient requirements for fertilizer recommendations to realize high-yielding, high-protein wheat production, and minimize overfertilization and associated environmental risks.

Coupled one-off alternate furrow irrigation with nitrogen topdressing at jointing optimizes soil nitrate-N distribution and wheat nitrogen productivity in dryland.

The judicious management of water and nitrogen (N) is pivotal for augmenting crop productivity and N use efficiency, while also mitigating environmental concerns. With the advent of the High-Farmland Construction Program in China, one-off irrigation has become feasible for most dryland fields, presenting a novel opportunity to explore the synergistic strategies of water and N management. This study delves into the impact of one-off alternate furrow irrigation (AFI) and topdressing N fertilizer (TN) on soil nitrate-N distribution, and N productivity-including plant N accumulation, translocation, and allocation, and grain yield, protein content, N use efficiency of winter wheat (Triticum aestivum L.) in 2018-2019 and 2019-2020. Experimental treatments administered at the jointing stage comprised of two irrigation methods-every (EFI) and alternative (AFI) furrow irrigation at 75 mm, and two topdressing N rates-0 (NTN) and 60 (TN) kg N ha-1. Additionally, a conventional local farmer practice featuring no irrigation and no topdressing N (NINTN) was served as control. Compared to NINTN, EFINTN substantially increased aboveground N accumulation, grain yield, and protein yield, albeit with a reduction in grain protein content by 8.1%-10.6%. AFI, in turn, led to higher nitrate-N accumulation in the 60-160 cm soil depth at booting and anthesis, but diminished levels at maturity, resulting in a significant surge in N accumulation from anthesis to maturity and its contribution to grain, N fertilizer partial factor productivity (PFPN), and N uptake efficiency (NUPE), thereby promoting grain yield by 9.9% and preserving grain protein content. Likewise, TN enhanced soil nitrate-N at key growth stages, reflected in marked improvements in N accumulation both from booting to anthesis and from anthesis to maturity, as well as in grain yield, protein content, and protein yield. The combination of AFI and TN (AFITN) yielded the highest grain yield, protein content, with PFPN, NUPE, and N internal efficiency outstripping those of EFINTN, but not AFINTN. In essence, one-off AFI coupled with TN at the jointing stage is a promising strategy for optimizing soil nitrate-N and enhancing wheat N productivity in dryland where one-off irrigation is assured.

Contribution of Antioxidant System Components to the Long-Term Physiological and Protective Effect of Salicylic Acid on Wheat under Salinity Conditions.

Salicylic acid (SA) plays a crucial role in regulating plant growth and development and mitigating the negative effects of various stresses, including salinity. In this study, the effect of 50 µM SA on the physiological and biochemical parameters of wheat plants under normal and stress conditions was investigated. The results showed that on the 28th day of the growing season, SA pretreatment continued to stimulate the growth of wheat plants. This was evident through an increase in shoot length and leaf area, with the regulation of leaf blade width playing a significant role in this effect. Additionally, SA improved photosynthesis by increasing the content of chlorophyll a (Chl a) and carotenoids (Car), resulting in an increased TAP (total amount of pigments) index in the leaves. Furthermore, SA treatment led to a balanced increase in the levels of reduced glutathione (GSH) and oxidized glutathione (GSSG) in the leaves, accompanied by a slight but significant accumulation of ascorbic acid (ASA), hydrogen peroxide (H2O2), proline, and the activation of glutathione reductase (GR) and ascorbate peroxidase (APX). Exposure to salt stress for 28 days resulted in a reduction in length and leaf area, photosynthetic pigments, and GSH and ASA content in wheat leaves. It also led to the accumulation of H2O2 and proline and significant activation of GR and APX. However, SA pretreatment exhibited a long-term growth-stimulating and protective effect under stress conditions. It significantly mitigated the negative impacts of salinity on leaf area, photosynthetic pigments, proline accumulation, lipid peroxidation, and H2O2. Furthermore, SA reduced the salinity-induced depletion of GSH and ASA levels, which was associated with the modulation of GR and APX activities. In small-scale field experiments conducted under natural growing conditions, pre-sowing seed treatment with 50 µM SA improved the main indicators of grain yield and increased the content of essential amino acids in wheat grains. Thus, SA pretreatment can be considered an effective approach for providing prolonged protection to wheat plants under salinity and improving grain yield and quality.

Genetic Gain and Inbreeding in Different Simulated Genomic Selection Schemes for Grain Yield and Oil Content in Safflower.

Safflower (Carthamus tinctorius L.) is a multipurpose minor crop consumed by developed and developing nations around the world with limited research funding and genetic resources. Genomic selection (GS) is an effective modern breeding tool that can help to fast-track the genetic diversity preserved in genebank collections to facilitate rapid and efficient germplasm improvement and variety development. In the present study, we simulated four GS strategies to compare genetic gains and inbreeding during breeding cycles in a safflower recurrent selection breeding program targeting grain yield (GY) and seed oil content (OL). We observed positive genetic gains over cycles in all four GS strategies, where the first cycle delivered the largest genetic gain. Single-trait GS strategies had the greatest gain for the target trait but had very limited genetic improvement for the other trait. Simultaneous selection for GY and OL via indices indicated higher gains for both traits than crossing between the two single-trait independent culling strategies. The multi-trait GS strategy with mating relationship control (GS_GY + OL + Rel) resulted in a lower inbreeding coefficeint but a similar gain compared to that of the GS_GY + OL (without inbreeding control) strategy after a few cycles. Our findings lay the foundation for future safflower GS breeding.

Natural allelic variation confers diversity in the regulation of flag leaf traits in wheat.

Flag leaf (FL) dimension has been reported as a key ecophysiological aspect for boosting grain yield in wheat. A worldwide winter wheat panel consisting of 261 accessions was tested to examine the phenotypical variation and identify quantitative trait nucleotides (QTNs) with candidate genes influencing FL morphology. To this end, four FL traits were evaluated during the early milk stage under two growing seasons at the Leibniz Institute of Plant Genetics and Crop Plant Research. The results showed that all leaf traits (Flag leaf length, width, area, and length/width ratio) were significantly influenced by the environments, genotypes, and environments × genotypes interactions. Then, a genome-wide association analysis was performed using 17,093 SNPs that showed 10 novel QTNs that potentially play a role in modulating FL morphology in at least two environments. Further analysis revealed 8 high-confidence candidate genes likely involved in these traits and showing high expression values from flag leaf expansion until its senescence and also during grain development. An important QTN (wsnp_RFL_Contig2177_1500201) was associated with FL width and located inside TraesCS3B02G047300 at chromosome 3B. This gene encodes a major facilitator, sugar transporter-like, and showed the highest expression values among the candidate genes reported, suggesting their positive role in controlling flag leaf and potentially being involved in photosynthetic assimilation. Our study suggests that the detection of novel marker-trait associations and the subsequent elucidation of the genetic mechanism influencing FL morphology would be of interest for improving plant architecture, light capture, and photosynthetic efficiency during grain development.

Multi-trait index: selection and recommendation of superior black bean genotypes as new improved varieties.

Common bean provides diet rich in vitamins, fiber, minerals, and protein, which could contribute into food security of needy populations in many countries. Developing genotypes that associate favorable agronomic and grain quality traits in the common bean crop could increase the chances of adopting new cultivars black bean. In this context, the present study aimed at selection of superior black bean lines using multi-variate indexes, Smith-Hazel-index, and genotype by yield*trait biplot analysis. These trials were conducted in Campos dos Goytacazes - RJ, in 2020 and 2021. The experimental design used was randomized blocks, with 28 treatments and three replications. The experimental unit consisted of four rows 4.0 m long, spaced at 0.50 m apart, with a sowing density of 15 seeds per meter. The two central rows were used for the evaluations. The selection of superior genotypes was conducted using the multiple trait stability index (MTSI), multi-trait genotype-ideotype distance index (MGIDI), multi-trait index based on factor analysis and genotype-ideotype distance (FAI-BLUP), Smith-Hazel index, and Genotype by Yield*Trait Biplot (GYT). The multivariate indexes efficiently selected the best black bean genotypes, presenting desirable selection gains for most traits. The use of multivariate indexes and GYT enable the selection of early genotypes with higher grain yields. These lines G9, G13, G17, G23, and G27 were selected based on their performance for multiple traits closest to the ideotype and could be recommended as new varieties.

The trade-off between grain weight and grain number in wheat is explained by the overlapping of the key phases determining these major yield components.

Enhancing grain yield is a primary goal in the cultivation of major staple crops, including wheat. Recent research has focused on identifying the physiological and molecular factors that influence grain weight, a critical determinant of crop yield. However, a bottleneck has arisen due to the trade-off between grain weight and grain number, whose underlying causes remain elusive. In a novel approach, a wheat expansin gene, TaExpA6, known for its expression in root tissues, was engineered to express in the grains of the spring wheat cultivar Fielder. This modification led to increases in both grain weight and yield without adversely affecting grain number. Conversely, a triple mutant line targeting the gene TaGW2, a known negative regulator of grain weight, resulted in increased grain weight but decreased grain number, potentially offsetting yield gains. This study aimed to evaluate the two aforementioned modified wheat genotypes (TaExpA6 and TaGW2) alongside their respective wild-type counterparts. Conducted in southern Chile, the study employed a Complete Randomized Block Design with four replications, under well-managed field conditions. The primary metrics assessed were grain yield, grain number, and average grain weight per spike, along with detailed measurements of grain weight and dimensions across the spike, ovary weight at pollination (Waddington's scale 10), and post-anthesis expression levels of TaExpA6 and TaGW2. Results indicated that both the TaExpA6 and the triple mutant lines achieved significantly higher average grain weights compared to their respective wild types. Notably, the TaExpA6 line did not exhibit a reduction in grain number, thereby enhancing grain yield per spike. By contrast, the triple mutant line showed a reduced grain number per spike, with no significant change in overall yield. TaExpA6 expression peaked at 10 days after anthesis (DAA), and its effect on grain weight over the WT became apparent after 15 DAA. In contrast, TaGW2 gene disruption in the triple mutant line increased ovary size at anthesis, leading to improved grain weight above the WT from the onset of grain filling. These findings suggest that the trade-off between grain weight and number could be attributed to the overlapping of the critical periods for the determination of these traits.

Optimal seeding rate enhances seedling quality, mechanical transplanting quality, and yield in hybrid rice.

To determine the appropriate seeding rate for machine-transplanted hybrid rice, field experiments were conducted during 2022-2023 using the hybrid rice variety Huazhe You 210 as the material. Four seeding rate treatments were set up: 40 (T1), 60 (T2), 80 (T3) and 100 g tray-1 (T4), to investigate the effects of seeding rate on the seedling quality, transplanting quality, yield formation, and economic benefits of high-quality indica hybrid rice seedlings. The results showed that with increasing seeding rate, the seedling base stem diameter and seedling plumpness of hybrid rice seedlings decreased, but the root entwining force gradually increased, leading to a deterioration in individual seedling quality but an improvement in collective characteristics. As the seeding rate increased, the missing hill rate during mechanical planting of hybrid rice significantly decreased, while the number of seedlings per hill and the damaged seedling rate showed an upward trend. The growth volume of tillers, tillering spikelet rate, and harvest index of hybrid rice in the field showed an overall downward trend with increasing seeding rate, while the accumulation of dry matter initially increased and then decreased. The yield and economic benefits of hybrid rice grains showed an initial increase followed by a decrease with increasing seeding rate, with the highest yield and economic benefits achieved with the T2 treatment. In conclusion, the appropriate seeding rate for machine-transplanted hybrid rice is T2 (60 g tray-1), which can maintain good seedling quality and improve transplanting quality, coordinate larger collective growth and appropriate harvest index, contributing to high yield and good economic benefits.

Seed development-related genes contribute to high yield heterosis in integrated utilization of elite autotetraploid and neo-tetraploid rice.

Introduction: Autotetraploid rice holds high resistance to abiotic stress and substantial promise for yield increase, but it could not be commercially used because of low fertility. Thus, our team developed neo-tetraploid rice with high fertility and hybrid vigor when crossed with indica autotetraploid rice. Despite these advances, the molecular mechanisms underlying this heterosis remain poorly understood. Methods: An elite indica autotetraploid rice line (HD11) was used to cross with neo-tetraploid rice, and 34 hybrids were obtained to evaluate agronomic traits related to yield. WE-CLSM, RNA-seq, and CRISPR/Cas9 were employed to observe endosperm structure and identify candidate genes from two represent hybrids. Results and discussion: These hybrids showed high seed setting and an approximately 55% increase in 1000-grain weight, some of which achieved grain yields comparable to those of the diploid rice variety. The endosperm observations indicated that the starch grains in the hybrids were more compact than those in paternal lines. A total of 119 seed heterosis related genes (SHRGs) with different expressions were identified, which might contribute to high 1000-grain weight heterosis in neo-tetraploid hybrids. Among them, 12 genes had been found to regulate grain weight formation, including OsFl3, ONAC023, OsNAC024, ONAC025, ONAC026, RAG2, FLO4, FLO11, OsISA1, OsNF-YB1, NF-YC12, and OsYUC9. Haplotype analyses of these 12 genes revealed the various effects on grain weight among different haplotypes. The hybrids could polymerize more dominant haplotypes of above grain weight regulators than any homozygous cultivar. Moreover, two SHRGs (OsFl3 and SHRG2) mutants displayed a significant reduction in 1000-grain weight and an increase in grain chalkiness, indicating that OsFl3 and SHRG2 positively regulate grain weight. Our research has identified a valuable indica autotetraploid germplasm for generating strong yield heterosis in combination with neo-tetraploid lines and gaining molecular insights into the regulatory processes of heterosis in tetraploid rice.

Combined subsoiling and ridge-furrow rainfall harvesting during the summer fallow season improves wheat yield, water and nutrient use efficiency, and quality and reduces soil nitrate-N residue in the dryland summer fallow-winter wheat rotation.

Both subsoiling tillage (ST) and ridge and furrow rainfall harvesting (RF) are widely implemented and play an important role in boosting wheat productivity. However, information about the effects of ST coupled with RF during the summer fallow season on wheat productivity and environmental issues remains limited. This study aims to explore the effects of ST coupled with RF on water harvesting, wheat productivity-yield traits, water and nutrient use efficiency and quality, and soil nitrate-N residue in dryland winter wheat-summer fallow rotation at the intersection of southern Loess Plateau and western Huang-Huai-Hai Plain in China in 2018-2022. Three tillage practices-deep plowing with straw turnover (PTST), subsoiling with straw mulching (STSM), and STSM coupled with RF (SRFSM)-are conducted during the summer fallow season. The results indicated that tillage practices during the summer fallow season significantly impacted wheat productivity and soil nitrate-N residue. Compared to PTST, STSM significantly enhanced rainfall fallow efficiency and water use efficiency by 7.0% and 14.2%, respectively, as well as N, P, and K uptake efficiency by 16.9%, 16.2%, and 15.3%, and thus increased grain yield by 14.3% and improved most parameters of protein components and processing quality, albeit with an increase in nitrate-N residue in the 0- to 300-cm soil depth by 12.5%. SRFSM, in turn, led to a further increase in water storage at sowing, resulting in an increase of water use efficiency by 6.8%, as well as N, P, and K uptake efficiency and K internal efficiency by 11.8%, 10.4%, 8.8%, and 4.7%, thereby significantly promoting grain yield by 10.2%, and improving the contents of all the protein components and enhancing the processing quality in grain, and simultaneously reducing the nitrate-N residue in the 0- to 300-cm soil layer by 16.1%, compared to STSM. In essence, this study posits that employing subsoiling coupled with ridge-furrow rainfall harvesting (SRFSM) during the summer fallow season is a promising strategy for enhancing wheat yield, efficiency, and quality, and simultaneously reducing soil nitrate-N residue within the dryland summer fallow-winter wheat rotation system.

Rice Big Grain1 improves grain yield in ectopically expressing rice and heterologously expressing tobacco plants.

Functional genomics through transgenesis has provided faster and more reliable methods for identifying, characterizing, and utilizing genes or quantitative trait loci linked to agronomic traits to target yield. The present study explored the role of Big Grain1 (BG1) gene of rice (Oryza sativa L.) in yield improvement of crop plants. We aimed to identify the genetic variation of OsBG1 in various indica rice cultivars by studying the allelic polymorphism of the gene, while also investigating the gene's potential to increase crop yield through the transgenic approach. Our study reports the presence of an extra 393 bp sequence having two 6 bp enhancer elements in the 3' regulatory sequence of OsBG1 in the large-grain cultivar IR64 but not in the small-grain cultivar Badshahbhog. A single copy of the OsBG1 gene in both the cultivars and a 4.1-fold higher expression of OsBG1 in IR64 than in Badshahbhog imply that the grain size is positively correlated with the level of OsBG1 expression in rice. The ectopic expression of OsBG1 under the endosperm-specific glutelin C promoter in Badshahbhog enhanced the flag leaf length, panicle weight, and panicle length by an average of 33.2%, 33.7%, and 30.5%, respectively. The length of anthers, spikelet fertility, and grain yield per plant increased in transgenic rice lines by an average of 27.5%, 8.3%, and 54.4%, respectively. Heterologous expression of OsBG1 under the constitutive 2xCaMV35S promoter improved the number of seed pods per plant and seed yield per plant in transgenic tobacco lines by an average of 2.2-fold and 2.6-fold, respectively. Improving crop yield is crucial to ensure food security and socio-economic stability, and identifying suitable genetic factor is the essential step towards this endeavor. Our findings suggest that the OsBG1 gene is a promising candidate for improving the grain yield of monocot and dicot plant systems by molecular breeding and genetic engineering.

[Effects of long-term positioning tillage on13C assimilate distribution and grain yield formation in wheat]. / 长期定位耕作模式对小麦13CåŒåŒ–ç‰©åˆ†é å’Œç±½ç²’äº§é‡å½¢æˆçš„å½±å“.

To provide a theoretical basis and technical support for the high-yield and high-efficiency production of wheat, we examined the effects of different tillage patterns on wheat grain yield of Jimai 22 and the physiological mechanisms in an experiment with three treatments: 14 years in rotary tillage (R), minimal and no tillage (S), and minimal and no tillage with a 2-year subsoiling interval (SS). We assessed the light interception by wheat plant canopy, the distribution of photosynthate transport, and grain yield for the three cultivation modes. The results showed that leaf area index was significantly higher for SS treatment than the other treatments at 14-28 days after anthesis. The interception rate and amount of photosynthetically active radiation in the upper and middle layers of wheat canopy were significantly higher for SS treatment than R and S treatments at 21 days after anthesis. The contribution rate of grain assimilation and the distribution proportion of 13C assimilated in grain, and the maximum and average filling rates, were the highest under SS treatment. The 1000-kernel weight for SS treatment increased by 8.7% and 9.6%, and the grain yield increased by 14.2% and 19.4% compared with R and S treatments, respectively. SS treatment significantly improved light energy utilization by wheat canopy, promoted the accumulation and transport of dry matter, increased the grain-filling rate, increased grain weight, which together contributed to the highest grain yield. Therefore, SS was the optimal tillage pattern under the conditions of this experiment.