Validation of DOE Factorial/Taguchi/Surface Response Models of Mechanical Properties of Synthetic and Natural Fiber Reinforced Epoxy Matrix Hybrid Material.

A validation of the factorial, Taguchi and response surface methodology (RSM) statistical models is developed for the analysis of mechanical tests of hybrid materials, with an epoxy matrix reinforced with natural Chambira fiber and synthetic fibers of glass, carbon and Kevlar. These materials present variability in their properties, so for the validation of the models a research methodology with a quantitative approach based on the statistical process of the design of experiments (DOE) was adopted; for which the sampling is in relation to the design matrix using 90 treatments with three replicates for each of the study variables. The analysis of the models reveals that the greatest pressure is obtained by considering only the source elements that are significant; this is reflected in the increase in the coefficient of determination and in the predictive capacity. The modified factorial model is best suited for the research, since it has an R2 higher than 90% in almost all the evaluated mechanical properties of the material; with respect to the combined optimization of the variables, the model showed an overall contribution of 99.73% and global desirability of 0.7537. These results highlight the effectiveness of the modified factorial model in the analysis of hybrid materials.

Pyroclastic Dust from Arequipa-Peru Decorated with Iron Oxide Nanoparticles and Their Ecotoxicological Properties in Water Flea D. magna.

A novel magnetic composite made of Peruvian pyroclastic dust material decorated with maghemite nanoparticles was synthesized and characterized using a variety of analytic techniques. The 13 nm maghemite nanoparticles were grown on the pyroclastic dust using the conventional coprecipitation chemical route. A short-term acute assay was developed to study the ecotoxicological behavior of the water flea, Daphnia magna. A 24 h-lethal concentration (LC50) value equal to 123.6 mg L-1 was determined only for the magnetic composite. While the pyroclastic dust material did not exhibit a lethal concentration, it caused morphologically significant changes (p < 0.05) for heart and tail parameters at high concentrations. Morphologies exposed to the magnetic composite above the 24 h-LC50 revealed less tolerance and significant changes in the body, heart, antenna, and eye. Hence, it affects biomarker growth and swimming. The reproduction rate was not affected by the raw pyroclastic dust material. However, the number of individuals showed a decrease with increasing composite concentrations. The present study indicates the LC50 value, which can be used as a reference concentration for in-situ water cleaning with this material without damaging or changing the Daphnia magna ecosystem.

Advances in porphyrins and chlorins associated with polysaccharides and polysaccharides-based materials for biomedical and pharmaceutical applications.

Over the last decade, the convergence of advanced materials and innovative applications has fostered notable scientific progress within the biomedical and pharmaceutical fields. Porphyrins and their derivatives, distinguished by an extended conjugated π-electron system, have a relevant role in propelling these advancements, especially in drug delivery systems, photodynamic therapy, wound healing, and (bio)sensing. However, despite their promise, the practical clinical application of these macrocycles is hindered by their inherent challenges of low solubility and instability under physiological conditions. To address this limitation, researchers have exploited the synergistic association of porphyrins and chlorins with polysaccharides by engineering conjugated systems and composite/hybrid materials. This review compiles the principal advances in this growing research field, elucidating fundamental principles and critically examining the applications of such materials within biomedical and pharmaceutical contexts. Additionally, the review addresses the eventual challenges and outlines future perspectives for this poignant research field. It is expected that this review will serve as a comprehensive guide for students and researchers dedicated to exploring state-of-the-art materials for contemporary medicine and pharmaceutical applications.

Tailoring/Tuning Properties of Polyester Urea-Urethanes through Hybridization with Titania Obtained Using the Sol-Gel Process.

Hybrid materials have been studied because in these materials the properties of organic components, such as elasticity and biodegradability, could be combined with the properties of inorganic components, such as good biological response, thereby transforming them into a single material with improved properties. In this work, Class I hybrid materials based on polyester-urea-urethanes and titania were obtained using the modified sol-gel method. This was corroborated using the FT-IR and Raman techniques which highlighted the formation of hydrogen bonds and the presence of Ti-OH groups in the hybrid materials. In addition, the mechanical and thermal properties and degradability were measured using techniques, such as Vickers hardness, TGA, DSC, and hydrolytic degradation; these properties could be tailored according to hybridization between both organic and inorganic components. The results show that Vickers hardness increased by 20% in hybrid materials as compared to polymers; also, the surface hydrophilicity increases in the hybrid materials, improving their cell viability. Furthermore, cytotoxicity in vitro test was carried out using osteoblast cells for intended biomedical applications and they showed non-cytotoxic behavior.

On the Donor: Acceptor Features for Poly(3-hexylthiophene): TiO2 Quantum Dots Hybrid Materials Obtained via Water Vapor Flow Assisted Sol-Gel Growth.

Here, we present a novel methodology for the preparation of P3HT:TiO2 quantum dots hybrid materials via water vapor flow-assisted sol-gel growth focusing on the structural, optical and electrical property characterization complemented with first-principles calculations as a promising donor-acceptor system for polymer and hybrid solar cells. X-ray diffraction and UV-Vis spectroscopy analyses suggest that the increasing concentration of TiO2 quantum dots leads to the formation of higher amounts of amorphous regions while the crystalline regions exhibited interesting aspect ratio modifications for the P3HT polymer. Raman spectra evidenced the formation of charge carriers in the P3HT with increasing TiO2 quantum dots content and the P3HT:TiO2 50:50 weight ratio resulted in the best composition for optimizing the bulk electronic conductivity, as evidenced by impedance spectroscopy studies. Our DFT calculations performed for a simplified model of the P3HT:TiO2 interface revealed that there is an important contribution of the thiophene carbon atoms states in the conduction band at the Fermi level. Finally, our DFT calculations also reveal an evident gain of electron density at the TiO2 (101) surface while the thiophene rings showed a loss of the electron density, thus confirming that the P3HT:TiO2 junction acts as a good donor-acceptor system. In our opinion, these results not only present a novel methodology for the preparation of P3HT:TiO2 quantum dots hybrid materials but also reveal some key aspects to guide the more rational design of polymer and hybrid solar cells.

Investigation of the applicability of silica-graphene hybrid materials as stationary phases for capillary liquid chromatography.

Graphene and graphene-derived substances are cutting-edge materials receiving increasing attention in the analytical chemistry field. Graphene oxide sheets bonded to amino silica particles functionalized with octadecyl (C18) groups and endcapped, also known as SiGO-C18ec, have been successfully employed as extraction phases and in analytical columns associated with conventional liquid chromatography (LC). In this work, SiGO-C18ec particles of 3, 5, and 10 µm nominal id were employed to pack capillary LC columns (100 mm long x 0.3 mm id), and their performance in the gradient mode was evaluated and compared. A 3 µm C18 capillary LC column (50 x 0.3 mm) was used as a reference column. Eight analytes having different polarities and topological surface areas were selected as a probe in this study: carbofuran clomazone, hexazinone, carbamazepine, citalopram, clomipramine, desipramine, and ochratoxin A. Studies about orthogonality were performed to investigate the orthogonality between the SiGO-C18ec and C18 phases. Among the SiGO-C18ec phases investigated, the column packed with 5 µm SiGO-C18ec particles presented the best peak capacity (29) in 15 min. Additionally, the performance of the columns packed with 5 µm SiGO-C18ec particles overcame the performance of the C18 columns used. Significant orthogonality was found between C18 and SiGO-C18ec packed columns; however, no significant differences were found between columns packed with SiGO-C18ec particles of different diameters.

A high-performance electrochemical sensor based on a mesoporous silica/titania material and cobalt(II) phthalocyanine for sensitive pentachlorophenol determination.

The synthesis and characterization of a novel titania/silica hybrid xerogel subsequently modified with 4-methylpyridine (4-Pic), named TiSi4Pic+Cl- is reported. The physicochemical, structural and thermal properties of TiSi4Pic+Cl- were characterized using several techniques. Anchoring cobalt(II) phthalocyanine (CoTsPc) in TiSi4Pic+Cl- showed greater electroanalytical sensitivity over other sensors built with these materials. A novel electroanalytical method was developed to quantify the noxious biocide pentachlorophenol (PCP) for environmental monitoring. The peak current intensity increased linearly with the analyte concentration in the range between 0.99 and 4.21 µmol L-1, based on the oxidation process (at + 0.81 V, vs. Ag/AgCl) of differential pulse voltammetry (DPV). The estimated limit of detection (LOD) was 29 nmol L-1. Recovery tests in environmental samples showed a PCP concentration of 2.05 ± 0.03 µmol L-1 (n = 3). The method was statistically validated by comparing the PCP concentrations with those obtained by molecular absorption spectrometry and high-performance liquid chromatography-diode array detection (HPLC-DAD). At a 95% confidence level, no difference between the results was found, therefore confirming the excellent accuracy of the proposed method.

Dexamethasone-Loaded Ureasil Hydrophobic Membrane for Bone Guided Regeneration.

Physical barrier membranes have been used to release active substances to treat critical bone defects; however, hydrophilic membranes do not present a prolonged release capacity. In this sense, hydrophobic membranes have been tested. Thus, this study aimed to develop hydrophobic membranes based on mixtures of ureasil-polyether-type materials containing incorporated dexamethasone (DMA) for the application in guided bone regeneration. The physicochemical characterization and biological assays were carried out using small-angle X-ray scattering (SAXS), an in vitro DMA release study, atomic force microscopy (AFM), a hemolysis test, and in vivo bone formation. The swelling degree, SAXS, and release results revealed that the u-PPO400/2000 membrane in the proportion of 70:30 showed swelling (4.69% ± 0.22) similar to the proportions 90:10 and 80:20, and lower than the proportion 60:40 (6.38% ± 0.49); however, an equal release percentage after 134 h was observed between the proportions 70:30 and 60:40. All u-PPO materials presented hemocompatibility (hemolysis ≤2.8%). AFM results showed that the treatments with or without DMA did not present significant differences, revealing a flat/smooth surface, with no pores and/or crystalline precipitates. Finally, in vivo results revealed that for both the commercial hydrophilic membrane and u-PPO400/2000 (70:30) after 60 days, the bone formation volume was 21%. In conclusion, hybrid membranes present unique characteristics for treating critical bone defects, considering the delayed and prolonged release results associated with the physical barrier capacity.

Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices.

In this work, the surface modification of zinc oxide nanoparticles (ZnO-NPs) with 3-glycidyloxy-propyl-trimethoxysilane (GPTMS) was investigated. The ZnO-NPs were synthesized using the physical method of continuous arc discharge in controlled atmosphere (DARC-AC). The surface modification was carried out using a chemical method with constant agitation for 24 h at room temperature. This surface functionalization of zinc oxide nanoparticles (ZnO-NPs-GPTMS) was experimentally confirmed by infrared spectroscopy (FT-IR), TGA, and XRD, and its morphological characterization was performed with SEM. The increase in mechanical bending properties in the two final hybrid materials compared to the base polymers was verified. An average increase of 67% was achieved with a moderate decrease in ductility. In the case of compressive strength, they showed mixed results, maintaining the properties. With respect to thermal properties, it was observed that inorganic reinforcement conferred resistance to degradation on the base material, giving a greater resistance to high temperatures.

On the Versatile Role of Electrospun Polymer Nanofibers as Photocatalytic Hybrid Materials Applied to Contaminated Water Remediation: A Brief Review.

A wide variety of materials, strategies, and methods have been proposed to face the challenge of wastewater pollution. The most innovative and promising approaches include the hybrid materials made of polymeric nanofibers and photocatalytic nanoparticles. Electrospun nanofibers with unique properties, such as nanosized diameter, large specific surface area, and high aspect ratio, represent promising materials to support and stabilize photocatalytic nanosized semiconductors. Additionally, the role performed by polymer nanofibers can be extended even further since they can act as an active medium for the in situ synthesis of photocatalytic metal nanoparticles or contribute to pollutant adsorption, facilitating their approach to the photocatalytic sites and their subsequent photodegradation. In this paper, we review the state of the art of electrospun polymer/semiconductor hybrid nanofibers possessing photocatalytic activity and used for the remediation of polluted water by light-driven processes (i.e., based on photocatalytic activity). The crucial role of polymer nanofibers and their versatility in these types of procedures are emphasized.

Microbial production and recovery of hybrid biopolymers from wastes for industrial applications- a review.

Agro-industrial wastes to be a global concern since agriculture and industrial processes are growing exponentially with the fast increase of the world population. Biopolymers are complex molecules produced by living organisms, but also found in many wastes or derived from wastes. The main drawbacks for the use of polymers are the high costs of the polymer purification processes from waste and the scale-up in the case of biopolymer production by microorganisms. However, the use of biopolymers at industrial scale for the development of products with high added value, such as food or biomedical products, not only can compensate the primary costs of biopolymer production, but also improve local economies and environmental sustainability. The present review describes some of the most relevant aspects related to the synthesis of hybrid materials and nanocomposites based on biopolymers for the development of products with high-added value.

H-BN nanosheets obtained by mechanochemical processes and its application in lamellar hybrid with graphene oxide.

Nowadays, hexagonal boron nitride nanosheets (h-BNNS) have shown promising results among 2D nanomaterials. A great effort has been made in recent years to obtain h-BNNS with a high-yield process to enable its large-scale application in industrial plants. In this work, we developed a mechanochemical method for obtaining h-BN nanosheets assisted by NaOH aqueous solution as process aid and aimed the ideal balance between yield, quality and process sustainability. Images obtained by transmission electron microscope suggested a great exfoliation of the h-BNNS in the range of 12-38 layers observed for well dispersed nanosheets. The macroscopic stability study, the polydispersity index, hydrodynamic diameter, and Zeta potential measurements suggested that material prepared in autoclave and ball milling followed by tip sonication process at 40 °C (h-BNNS-T40) could be considered the most promising material. The process used in this case reached a yield of about 37% of nanosheets with an optimal balance between quality and practicality. A hybrid lamellar material was also prepared by drop-casting and dip-coating techniques. An increase on thermal stability in oxidizing atmosphere was observed with respect to the pure graphene oxide (GO). Fourier transformation infrared spectroscopy and RAMAN suggested the presence of chemical interactions between h-BNNS and GO in the hybrid. This fact supports the interest of extending the study of this hybrid (which has an easy preparation method) to further explore its applicability.

Synthesis and Characterization of LiFePO4-PANI Hybrid Material as Cathode for Lithium-Ion Batteries.

This work focuses on the synthesis of LiFePO4-PANI hybrid materials and studies their electrochemical properties (capacity, cyclability and rate capability) for use in lithium ion batteries. PANI synthesis and optimization was carried out by chemical oxidation (self-assembly process), using ammonium persulfate (APS) and H3PO4, obtaining a material with a high degree of crystallinity. For the synthesis of the LiFePO4-PANI hybrid, a thermal treatment of LiFePO4 particles was carried out in a furnace with polyaniline (PANI) and lithium acetate (AcOLi)-coated particles, using Ar/H2 atmosphere. The pristine and synthetized powders were characterized by XRD, SEM, IR and TGA. The electrochemical characterizations were carried out by using CV, EIS and galvanostatic methods, obtaining a capacity of 95 mAhg-1 for PANI, 120 mAhg-1 for LiFePO4 and 145 mAhg-1 for LiFePO4-PANI, at a charge/discharge rate of 0.1 C. At a charge/discharge rate of 2 C, the capacities were 70 mAhg-1 for LiFePO4 and 100 mAhg-1 for LiFePO4-PANI, showing that the PANI also had a favorable effect on the rate capability.

Qualitative and Semiquantitative Determination of the Atomic and Molecular Tungsten Distributions in Hybrid Hydroxyurethanes-Poly(dimethylsiloxane) Films Containing Phosphotungstates ([PW12O40]3-).

In this study, hybrid poly(dimethylsiloxane)-derived hydroxyurethanes films (PDMSUr-PWA) containing phosphotungstic acid (H3PW12O40/PWA) were characterized using field emission gun scanning electron microscopy (FEG-SEM), in attenuated total reflectance Fourier transform mid-infrared mode (ATR FT-MIR), and analyzed using synchrotron radiation micro-X-ray fluorescence (SR-µXRF), synchrotron radiation grazing incidence X-ray fluorescence (SR-GIXRF), laser-induced breakdown spectroscopy (LIBS), and instrumental neutron activation analysis (NAA) in order to correlate the distribution patterns of tungsten and properties of PDMSUr-PWA films. PDMS constitute elastomers with good mechanical, thermal, and chemical (hydrophobicity/non-hygroscopy) resistance. Currently, products based on urethanes (e.g., polyurethanes) are widely used in many applications as plastics, fiber-reinforced polymers, high-performance adhesives, corrosion-resistant coatings, photochromic films, among others. The possibility to combine inorganic and organic components can produce a hybrid material with unique properties. PWA has an important role as agent against the corrosion of steel surfaces in different media, besides exhibiting amazing catalytic and photochromic properties in these films. PWA kept its structure inside of these hybrid films through interactions between the organic matrix of PDMSUr and silanol from the inorganic part (organically modified silica), as was shown using ATR FT-MIR spectra. The FEG-SEM/SR-µXRF/wide-angle X-ray scattering (WAXS)/X-ray diffraction (XRD)/energy dispersive X-ray results proved the presence of PWA in the composition of domains of PDMSUr-PWA films. At PWA concentrations higher than 50 wt%/wt, tungsten segregation across the thickness is predominant, while that at PWA concentrations lower than 35 wt%/wt, tungsten segregation at surface is predominant. Inhomogeneities in the tungsten distribution patterns (at micrometric and millimetric level) may play an important role in the mechanical properties of these films (elastic modulus and hardness).

Immobilization of papain enzyme on a hybrid support containing zinc oxide nanoparticles and chitosan for clinical applications.

A new hybrid bionanomaterial composed of zinc oxide nanoparticles (ZnO NPs) and chitosan was constructed after enzymatic immobilization of papain for biomedical applications. In this work, we report the preparation and characterization steps of this bionanomaterial and its biocompatibility in vitro. The properties of the immobilized papain system were investigated by transmission electron microscopy, zeta potential, DLS, UV-vis absorption spectroscopy, FTIR spectroscopy, and X-ray diffraction. The prepared bionanomaterial exhibited a nanotriangular structure with a size of 150 nm and maintained the proteolytic activity of papain. In vitro analyses demonstrated that the immobilized papain system decreased the activation of phagocytic cells but did not induce toxicity. Based on the results obtained, we suggest that the novel bionanomaterial has great potential in biomedical applications in diseases such as psoriasis and wounds.

Synthesis, characterization and application of a novel ion hybrid imprinted polymer to adsorb Cd(II) in different samples.

Two new ionic imprinted hybrid polymers (IIHP) and their corresponding non imprinted hybrid polymers (NIHP) were synthesized. The prepared IIHP was highly selective to Cd2+. To prepare the IIHP, 1-vinylimidazole (VIN) was used as the functional monomer, (3-mercaptopropyl) trimethoxysilane (MP) or (3-aminopropyl) trimethoxysilane (AMP) was used as the functional organosilane, trimethylolpropane (TRIM) was used as the crosslinking agent, AIBN was used as a radical initiator and TEOS was used as a functional precursor. The functional monomer was selected considering calculations based on the density functional theory (DFT). The fabricated materials were characterized via field emission gun scanning electron microscopy (FEG-SEM), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX) and thermogravimetric analysis (TGA). The maximum adsorption capacity of Cd2+ was achieved at a pH of 7.2 in the tris-HCl medium. The adsorption test indicated that the reaction followed pseudo second order kinetics, and the equilibrium sorption data fitted well into the Langmuir isotherm model. The relative selectivity coefficients of polymers IIHP-VIN-AMP and IIHP-VIN-MP, as evaluated in binary mixtures of Cd2+ and interferent cations (Pb2+, Zn2+, Hg2+, Cu2+, Ni2+, Ca2+, Mg2+, and Na+) at different molar ratios, were greater than one due to the presence of specific recognition sites for Cd2+ ions. Moreover, the selective materials exhibited a high reusability and reproducibility in the context of Cd2+ adsorption. These adsorbent materials, specifically IIHP-VIN-MP, exhibited a % removal efficiency of more than 90% for the Cd2+ in river water samples.

Co2TiO4/Reduced Graphene Oxide Nanohybrids for Electrochemical Sensing Applications.

For the first time, the synthesis, characterization, and analytical application for hydrogen peroxide quantification of the hybrid materials of Co2TiO4 (CTO) and reduced graphene oxide (RGO) is reported, using in situ (CTO/RGO) and ex situ (CTO+RGO) preparations. This synthesis for obtaining nanostructured CTO is based on a one-step hydrothermal synthesis, with new precursors and low temperatures. The morphology, structure, and composition of the synthesized materials were examined using scanning electron microscopy, X-ray diffraction (XRD), neutron powder diffraction (NPD), and X-ray photoelectron spectroscopy (XPS). Rietveld refinements using neutron diffraction data were conducted to determine the cation distributions in CTO. Hybrid materials were also characterized by Brunauer-Emmett-Teller adsorption isotherms, Scanning Electron microscopy, and scanning electrochemical microscopy. From an analytical point of view, we evaluated the electrochemical reduction of hydrogen peroxide on glassy carbon electrodes modified with hybrid materials. The analytical detection of hydrogen peroxide using CTO/RGO showed 11 and 5 times greater sensitivity in the detection of hydrogen peroxide compared with that of pristine CTO and RGO, respectively, and a two-fold increase compared with that of the RGO+CTO modified electrode. These results demonstrate that there is a synergistic effect between CTO and RGO that is more significant when the hybrid is synthetized through in situ methodology.

When a Red-NIR-Emissive Cs2 [Mo6 Br14 ] Interacts with an Active Diureasil-PEO Matrix: Design of Tunable and White-Light-Emitting Hybrid Material.

Hybrid materials that combine diureasil matrices and octahedral molybdenum clusters have been synthesized to design lead-, cadmium- and rare-earth-free emitters for lighting or optoelectronic applications. This association leads to homogeneous and stable hybrids, for which the emission color can be tailored in the entire visible range, including white light; this is thanks to effective energy transfers from the host to the nanocluster.

Advances in Magnetic Noble Metal/Iron-Based Oxide Hybrid Nanoparticles as Biomedical Devices.

The study of the noble metal magnetic hybrid nanoparticles is a really promising topic from both the scientific and the technological points of views, with applications in several fields. Iron oxide materials which are hybridized with noble metal nanoparticles (NPs) have attracted increasing interest among researchers because of their cooperative effects on combined magnetic, electronic, photonic, and catalytic activities. This review article contains a summary of magnetic noble metal/iron oxide nanoparticle systems potentially useful in practical biomedical applications. Among the applications, engineered devices for both medical diagnosis and treatments were considered. The preparation to produce different structures, as blends or core-shell structures, of several nanometric systems was also considered. Several characterization techniques available to describe the structure, morphology and different kinds of properties of hybrid nanoparticles are also included in this review.

Designing hybrid materials with multifunctional interfaces for wound dressing, electrocatalysis, and chemical separation.

An infinite number of possibilities can emerge from the combination of phases in hybrid systems. Interfacing phases is a strategy to obtain a set of properties in one system that are beyond the abilities of single phases. Herein, the progress in materials science exploring hybrid systems are discussed from the point of view of three important applications: wound dressing; electrocatalysis; and chemical separation. These three unrelated applications exemplify the broad impact of hybrid materials, which can be coherently designed to achieve outstanding performance. Many inspiring works have been published in the last few years, remodeling the edges of human knowledge on hybrid materials. However, the challenges in the coherent design seem to rely on the development of synthetic processes to achieve stronger integration among the phases in a hybrid material.