Recycling Fe and improving organic pollutant removal via in situ forming magnetic core-shell Fe3O4@CaFe-LDH in Fe(II)-catalyzed oxidative wastewater treatment.

Due to its high efficiency, Fe(II)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants. A lot of chemical Fe sludge along with various refractory pollutants was concomitantly produced, which may cause secondary environmental problems without proper disposal. We here innovatively proposed an effective method of achieving zero Fe sludge, reusing Fe resources (Fe recovery = 100%) and advancing organics removal (final TOC removal > 70%) simultaneously, based on the in situ formation of magnetic Ca-Fe layered double hydroxide (Fe3O4@CaFe-LDH) nano-material. Cations (Ca2+ and Fe3+) concentration (≥ 30 mmol/L) and their molar ratio (Ca:Fe ≥ 1.75) were crucial to the success of the method. Extrinsic nano Fe3O4 was designed to be involved in the Fe(II)-catalytic wastewater treatment process, and was modified by oxidation intermediates/products (especially those with COO- structure), which promoted the co-precipitation of Ca2+ (originated from Ca(OH)2 added after oxidation process) and by-produced Fe3+ cations on its surface to in situ generate core-shell Fe3O4@CaFe-LDH. The oxidation products were further removed during Fe3O4@CaFe-LDH material formation via intercalation and adsorption. This method was applicable to many kinds of organic wastewater, such as bisphenol A, methyl orange, humics, and biogas slurry. The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs. This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(II)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.

Synthesis of δ-MnO2 via ozonation routine for low temperature formaldehyde removal.

Nowadays, it is still a challenge to prepared high efficiency and low cost formaldehyde (HCHO) removal catalysts in order to tackle the long-living indoor air pollution. Herein, δ-MnO2 is successfully synthesized by a facile ozonation strategy, where Mn2+ is oxidized by ozone (O3) bubble in an alkaline solution. It presents one of the best catalytic properties with a low 100% conversion temperature of 85°C for 50 ppm of HCHO under a GHSV of 48,000 mL/(g·hr). As a comparison, more than 6 times far longer oxidation time is needed if O3 is replaced by O2. Characterizations show that ozonation process generates a different intermediate of tetragonal ß-HMnO2, which would favor the quick transformation into the final product δ-MnO2, as compared with the relatively more thermodynamically stable monoclinic γ-HMnO2 in the O2 process. Finally, HCHO is found to be decomposed into CO2 via formate, dioxymethylene and carbonate species as identified by room temperature in-situ diffuse reflectance infrared fourier transform spectroscopy. All these results show great potency of this facile ozonation routine for the highly active δ-MnO2 synthesis in order to remove the HCHO contamination.

Thermo-activated in situ rectal gel preparation for Ibuprofen using eutectic mixture.

This study aimed to develop a thermosensitive in situ gel formulation for rectal delivery of Ibuprofen as an efficient alternative dosage form. Utilizing poloxamer 188, poloxamer 407, and HPMC via cold technique method, a thermosensitive in situ gel was successfully prepared. The concentration of Ibuprofen in the formulations was 1.2 % (w/w). The prepared gels underwent assessment for clarity, gelation temperature, gelation time, gel strength, spread ability, syringe-ability, pH, viscosity, FTIR, and drug content. The selected formulations exhibited a gelation temperature within the range of 30 °C to 36 °C, with consistent amount of drug soluble in the formulations (93 % - 110 %). Mucoadhesive studies, in vitro release tests, ex vivo modeling of drug release, kinetic studies modeling, and histopathology testing were also conducted. The formulation comprising 18 % poloxamer 407, 12 % poloxamer 188, and 1 % sodium chloride (FS15) demonstrated suitable gelation temperature and desirable drug release rate. In vitro drug release tests indicated completion within one hour for both FS10 (20 % P407 & 10 % P188) and FS15 (18 % P407 & 12 % P188), with consistent and predictable release patterns observed through kinetic modeling analysis. Microscopic histopathology examination confirmed the safety of the selected formula, exhibiting no irritation in the mucosal membrane of the sheep. In conclusion, Ibuprofen thermosensitive in situ gel presents a promising and convenient strategy as a rectal carrier and an alternative dosage form to solid suppositories.

In Situ Collection and SERS Detection of Nitrite in Exhalations on Facemasks Based on Wettability Differences.

As one of the common carriers of biological information, along with human urine specimens and blood, exhaled breath condensate (EBC) carries reliable and rich information about the body's metabolism to track human physiological normal/abnormal states and environmental exposures. What is more, EBC has gained extensive attention because of the convenient and nondestructive sampling. Facemasks, which act as a physical filter barrier between human exhaled breath and inhaled substances from the external environment, are safe, noninvasive, and economic devices for direct sampling of human exhaled breath and inhaled substances. Inspired by the ability of fog collection of Namib desert beetle, a strategy for in situ collecting and detecting EBC with surface-enhanced Raman scattering is illustrated. Based on the intrinsic and unique wettability differences between the squares and the surrounding area of the pattern on facemasks, the hydrophilic squares can capture exhaled droplets and spontaneously enrich the analytes and silver nanocubes (AgNCs), resulting in good repeatability in situ detection. Using R6G as the probe molecule, the minimal detectable concentration can reach as low as 10-16 M, and the relative standard deviation is less than 7%. This proves that this strategy can achieve high detection sensitivity and high detection repeatability. Meanwhile, this strategy is applicable for portable nitrite analysis in EBC and may provide an inspiration for monitoring other biomarkers in EBC.

The corrosion behavior of carbon steel under coexistence of carbon dioxide and SRB.

The corrosion behavior of carbon steel under the coexistence of carbon dioxide and SRB was studied by means of corrosion weight loss, SEM, EDS, in situ pH test, and other methods. The results showed that Chloride ions, temperature, pH, and oxygen coexist with iron bacteria will affect the corrosion under the coexistence of CO2 and SRB, and SRB tends to grow in a favorable environment for itself, and the corrosion rate of X52N at 42 days is slightly higher than that at 21 days. However, the pitting depth increased sharply from 21.20 µm in 21 days to 39.79 µm in 42 days. So that the corrosion can be divided into two stages. First, SRB catalyze the dissolution of FeCO3, leading to local uniform corrosion. Second, SRB directly obtain electrons from the metal surface, resulting in local pitting. In addition, the environment under the stable mineralized biofilm was found to be slightly alkaline.

Multiplexing Imaging of Closely Located Single-Nucleotide Mutations in Single Cells via Encoded in situ PCR.

Mutation accumulation in RNAs results in closely located single-nucleotide mutations (SNMs), which is highly associated with the drug resistance of pathogens. Imaging of SNMs in single cells has significance for understanding the heterogeneity of RNAs that are related to drug resistance, but the direct "see" closely located SNMs remains challenging. Herein, we designed an encoded ligation-mediated in situ polymerase chain reaction method (termed enPCR), which enabled the visualization of multiple closely located SNMs in bacterial RNAs. Unlike conventional ligation-based probes that can only discriminate a single SNM, this method can simultaneously image different SNMs at closely located sites with single-cell resolution using modular anchoring probes and encoded PCR primers. We tested the capacity of the method to detect closely located SNMs related to quinolone resistance in the gyrA gene of Salmonella enterica (S. enterica), and found that the simultaneous detection of the closely located SNMs can more precisely indicate the resistance of the S. enterica to quinolone compared to the detection of one SNM. The multiplexing imaging assay for SNMs can serve to reveal the relationship between complex cellular genotypes and phenotypes.

Low-Temperature Decomposition and Oxidation of the Nerve Agent Simulant on Mesoporous Nickel Oxide and Cu-Doped Nickel Oxide.

In an effort to develop the next frontier filtration material for chemical warfare agent (CWA) decomposition, we synthesized mesoporous NiO and CuxNi1-xO (x = 0.10 and 0.20) and studied the decomposition of CWA simulant diisopropyl fluorophosphate (DIFP) on their surfaces. Mesoporous NiO and CuxNi1-xO were fully characterized and found to be a solid solution with no phase separation up to 20% copper dopant. The synthesized materials were successfully templated producing ordered mesoporous metal oxides with high surface areas (67.89- 94.38 m2/g). Through Raman spectroscopy, we showed that pure NiO contained a high concentration of Ni2+ vacancies, while Cu2+ reduced these defects. Through in situ infrared spectroscopy, we determined the surface species formed, potential pathways, and driving factors for decomposition. Upon exposure of DIFP, all materials produced similar decomposition products CO, CO2, carbonyls, and carbonates. However, decomposition reactions were sustained longer on mesoporous NiO, facilitated by the higher Ni2+ vacancy concentration. NiO was further studied with DIFP, first at low dosing temperatures (-50 °C), which still resulted in the production of CO and carbonates, and then, second, with a higher pretreatment temperature, which showed the importance of terminal hydroxyls/water to fully oxidize decomposition products to CO2. Mesoporous NiO demonstrated high decomposition and oxidation capabilities at temperatures below room temperature, all without any external excitation or noble metals, making it a promising frontier filtration material for CWA decomposition.

Cross-Linkable Binders for Si Anodes in High-Energy-Density Lithium-Ion Batteries.

Although silicon (Si) has a high theoretical capacity, the large volume expansion during lithiation has greatly hindered its application in high-energy-density lithium-ion batteries (LIBs). Among the strategies for improving the performance of Si anode, the role of binders should not be underestimated. Here, a novel strategy for designing a cross-linkable binder for Si anode has been proposed. The binder with hydroxyl and nitrile groups can be in situ covalently cross-linked through the amide group in the batteries. The cross-linked binder (c-POAH) shows high elasticity and strong adhesion to Si particles and the current collector. Si||Li half coin cells using the c-POAH binder have excellent cycle performance and the capacity retention ratio is 67.1% after 100 cycles at 0.2 C. Scanning electronic microscopy images show that the c-POAH binder can contribute to suppressing the pulverization of the Si anode. Moreover, the investigation with X-ray photoelectronic spectrum demonstrates that the decomposition of the liquid electrolyte on Si anode has been mitigated and the c-POAH binder can promote the formation of a more stable SEI film. Our strategy of endowing the binder with good elasticity through in situ cross-linking has opened up a new route for developing binders, which will definitely promote the application of Si anodes in high-energy-density LIBs.

Programming of in Situ Tumor Vaccines via Supramolecular Nanodrug/Hydrogel Composite and Deformable Nanoadjuvant for Cancer Immunotherapy.

The development of in situ tumor vaccines offers promising prospects for cancer treatment. Nonetheless, the generation of plenary autologous antigens in vivo and their codelivery to DC cells along with adjuvants remains a significant challenge. Herein, we developed an in situ tumor vaccine using a supramolecular nanoparticle/hydrogel composite (ANPMTO/ALCD) and a deformable nanoadjuvant (PPER848). The ANPMTO/ALCD composite consisted of ß-cyclodextrin-decorated alginate (Alg-g-CD) and MTO-encapsulated adamantane-decorated nanoparticles (ANPMTO) through supramolecular interaction, facilitating the long-term and sustained production of plenary autologous antigens, particularly under a 660 nm laser. Simultaneously, the produced autologous antigens were effectively captured by nanoadjuvant PPER848 and subsequently transported to lymph nodes and DC cells, benefiting from its optimized size and deformability. This in situ tumor vaccine can trigger a robust antitumor immune response and demonstrate significant therapeutic efficacy in inhibiting tumor growth, suppressing tumor metastasis, and preventing postoperative recurrence, offering a straightforward approach to programming in situ tumor vaccines.

Multilayer porous Co-Fe bimetallic electrocatalyst based on multi-walled carbon nanotubes for rechargeable zinc-air batteries.

The rational design of efficient, stable, low-cost non-precious metal-based electrocatalysts with enhanced oxygen reduction reaction (ORR) activity has attracted widespread attention. In this study, a novel electrocatalyst, Fe/Co-N-MWCNT, was prepared by in-situ growth of ZIF-8 and Fe/Co-Phen on multi-walled carbon nanotubes (MWCNTs), then pyrolysis under different temperature to obtain optimal one. During the pyrolysis process, the incorporation of Fe and Co facilitated the formation of metal active sites and Fe-Co alloy, thereby promoting electron transfer and enhancing the ORR activity. Compared to Pt/C (E1/2 = 0.854V, JL = 4.90 mA cm-2), Fe/Co-N-MWCNT demonstrated a comparable half-wave potential (E1/2 = 0.812V) and an enhanced limiting current density (JL = 5.37 mA cm-2). Furthermore, Fe/Co-N-MWCNT was stable and showed no significant change after 2000 cycles, with only a negative shift of 7 mV in E1/2. Ampere response testing revealed that the current decay of Fe/Co-N-MWCNT after 10000 s was only about 7.8%, while that of Pt/C was about 18.4%. Due to its excellent catalytic stability, Fe/Co-N-MWCNT was demonstrated to be an excellent candidate for rechargeable zinc-air batteries. The outstanding electrocatalytic performance of Fe/Co-N-MWCNT can be attributed to its high pyridinic nitrogen content, the unique structure and abundant metal active sites.

Multimodal Machine Learning-Based Ductal Carcinoma in situ Prediction from Breast Fibromatosis.

Objective: To develop a clinical-radiomics model using a multimodal machine learning method for distinguishing ductal carcinoma in situ (DCIS) from breast fibromatosis. Methods: The clinical factors, ultrasound features, and related ultrasound images of 306 patients (198 DCIS patients) were retrospectively collected. Patients in the development and validation cohort were 184 and 122, respectively. The independent clinical and ultrasound factors identified by the multivariable logistic regression analysis were used for the clinical-ultrasound model construction. Then, the region of interest of breast lesions was delineated and radiomics features were extracted. Six machine learning algorithms were trained to develop a radiomics model. The algorithm with higher and more stable prediction ability was chosen to convert the output of the results into the Radscore. Further, the independent clinical predictors and Radscore were enrolled into the logistic regression analysis to generate a combined clinical-radiomics model. The receiver operating characteristic curve analysis, DeLong test, and decision curve analysis were adopted to compare the prediction ability and clinical efficacy of three different models. Results: Among the six classifiers, logistic regression model was selected as the final radiomics model. Besides, the combined clinical-radiomics model exhibited a superior ability in distinguishing DCIS from breast fibromatosis to the clinical-ultrasound model and the radiomics model. Conclusion: The combined model by integrating clinical-ultrasound factors and radiomics features performed well in predicting DCIS, which might promote prompt interventions to improve the early diagnosis and prognosis of the patients.

In Situ Hydrogel with Immobilized Mn-Porphyrin for Reactive Oxygen Species Scavenging, Oxygen Generation, and Risedronate Delivery in Bone Defect Treatment.

We propose a hydrogel immobilized with manganese porphyrin (MnP), a biomimetic superoxide dismutase (SOD), and catalase (CAT) to modulate reactive oxygen species (ROS) and hypoxia that impede the repair of large bone defects. Our hydrogel synthesis involved thiolated chitosan and polyethylene glycol-maleimide conjugated with MnPs (MnP-PEG-MAL), which enabled in situ gelation via a click reaction. Through optimization, a hydrogel with mechanical properties and catalytic effects favorable for bone repair was selected. Additionally, the hydrogel was incorporated with risedronate to induce synergistic effects of ROS scavenging, O2 generation, and sustained drug release. In vitro studies demonstrated enhanced proliferation and differentiation of MG-63 cells and suppressed proliferation and differentiation of RAW 264.7 cells in ROS-rich environments. In vivo evaluation of a calvarial bone defect model revealed that this multifunctional hydrogel facilitated significant bone regeneration. Therefore, the hydrogel proposed in this study is a promising strategy for addressing complex wound environments and promoting effective bone healing.

Comparison of clinical outcomes of a corneal wavefront- and topography-guided platforms for laser in situ keratomileusis on virgin eyes: an expanded cohort study.

PURPOSE: To compare the clinical outcomes of myopiacorrected with corneal-wavefront-guided (CWG) laser in situ keratomileusis (LASIK) with AMARIS 1050S (SCHWIND eye-tech-solutions GmbH & Co. KG) and corneal-topography-guided (CTG) LASIK with WaveLight EX500 (Alcon Laboratories, Fort Worth, TX). METHODS: In this prospective, pseudo-randomized expanded cohort study, a total of 266 patients were subjected to binocular LASIK surgery, either with WaveLight EX500 (WaveLight group) or Amaris 1050S (AMARIS group) platforms. Data related to right eyes were selected for analysis. Corneal higher-order aberration (HOA) was selected as the primary endpoint; while visual acuity and refraction were the secondary endpoints. All the endpoints were assessed at 3 months postoperatively. RESULTS: There were 134 eyes in the AMARIS group and 132 eyes in the WaveLight group. After 3 months of postoperative follow-up, spherical and coma aberrations were significantly lower (P < 0.05) in the WaveLight group (spherical aberration: - 0.104 ± 0.199 µm; coma aberration: - 0.117 ± 0.202 µm) in comparison with the AMARIS group (spherical aberrations: 0.254 ± 0.146 µm; coma aberrations: 0.316 ± 0.297 µm). In the AMARIS group, 96.3% of the eyes achieved an uncorrected distance visual acuity (UDVA) of 20/20 while in the WaveLight group, 96.2% of the eyes achieved an UDVA of 20/20. Furthermore, the mean postoperative manifest refraction spherical equivalent (MRSE) was - 0.02 ± 0.28 in the AMARIS group and - 0.05 ± 0.21 in the WaveLight group (P = 0.34). CONCLUSIONS: Both WaveLight EX500 and Amaris 1050S LASIK showed excellent refractive and visual outcomes. In addition, the WaveLight group showed minimal spherical and coma aberrations when compared to the AMARIS group.

The Essentials of Debriefing and Reflective Practice.

Debriefing is a specific type of reflective learning. Debriefing follows an experience, with the goal of taking meaningful learning away from the experience. It is often used following a simulation-based educational experience but the same techniques can be used following actual clinical care. Early studies in simulation suggest that learning does not occur in simulation-based education in the absence of debriefing. There are phases of a debriefing discussion and specific conversational strategies that are used to engage learners and provoke engaging learning discussions. Standards of practice call for facilitators with specialized training and a debriefing method that is theory based.

Creating an Effective Simulation Environment.

Simulation is a teaching and learning strategy that is used commonly in healthcare education in academia and practice settings. Nurses at the bedside may recall times in their formal education where simulation was used as a form of clinical learning or evaluation of their performance. It is possible that with the rise of nurse residency programs and in situ simulation that bedside nurses are experiencing simulation regularly within the workplace as a means of professional development. This article will set the stage for educators to develop high-quality simulation experiences.

Simulation Modalities in Clinical Practice.

For maximum effectiveness of a simulation-based educational experience, the correct modality must be chosen. Modality refers to the equipment or platform used to conduct the simulation. There are a variety of options available to clinical simulation educators, ranging from simple task trainers to full-body manikins to virtual experiences. The correctly chosen modality will allow the learners to achieve the learning objectives.

Implementing Simple and Effective Simulation Experiences.

Implementing simple and effective nursing simulation experiences at the bedside or in a simulation center in a hospital setting can be an impactful way to enhance skill development, encourage critical thinking, and improve patient safety. However, there are often challenges and barriers to the bedside nurses participating in simulation in the hospital setting. Applying the Healthcare Simulation Standards of Best Practice will give the bedside nurse and educator consistency in implementing and planning effective simulations.

A spatiotemporal molecular atlas of mouse spinal cord injury identifies a distinct astrocyte subpopulation and therapeutic potential of IGFBP2.

Spinal cord injury (SCI) triggers a cascade of intricate molecular and cellular changes that determine the outcome. In this study, we resolve the spatiotemporal organization of the injured mouse spinal cord and quantitatively assess in situ cell-cell communication following SCI. By analyzing existing single-cell RNA sequencing datasets alongside our spatial data, we delineate a subpopulation of Igfbp2-expressing astrocytes that migrate from the white matter (WM) to gray matter (GM) and become reactive upon SCI, termed Astro-GMii. Further, Igfbp2 upregulation promotes astrocyte migration, proliferation, and reactivity, and the secreted IGFBP2 protein fosters neurite outgrowth. Finally, we show that IGFBP2 significantly reduces neuronal loss and remarkably improves the functional recovery in a mouse model of SCI in vivo. Together, this study not only provides a comprehensive molecular atlas of SCI but also exemplifies how this rich resource can be applied to endow cells and genes with functional insight and therapeutic potential.

Green preparation of regenerable biohybrids with xanthan gum-stabilized biogenic mackinawite nanoparticles for efficient treatment from high-concentration uranium wastewater.

The high efficiency, economy, sustainability and no secondary pollution of U(VI) removal is an important and challenging topic for U(VI) wastewater treatment. Here, the regenerable biohybrids with xanthan gum (XG) stabilized biogenic mackinawite nanoparticles (BX-FeS) were prepared, where XG acted as carrier facilitated the Fe2+ attachment and induced the low size, high stability and activity of nearly spherical FeS nanoparticles. Results showed that BX-FeS kept high activity after storing two years and good performance for U(VI) removal in broad pH range and co-existence of ions, and had greater removal efficiency (97.9 %) than biogenic B-FeS (67.1 %). Moreover, BX-FeS preformed high adsorption capacity in uranium wastewater (658.0 mg/g), and lower cost compared with zerovalent-iron and silica gel. Importantly, BX-FeS maintained high activity within three regeneration cycles driven by Desulfovibrio desulfuricans, inhibited the secondary pollution (Fe3+, SO42-) of reaction. This study provides a new strategy for sustainable and efficient treatment of U(VI) wastewater.