Long-term performance: strength and metal encapsulation in alkali-activated iron ore tailings.

Understanding the strength behavior and leaching characteristics of mining tailings stabilized with alkali-activated cements in the short, medium, and long term is crucial for the feasibility of material applications. In this context, this study assessed the stabilization/solidification of iron ore tailings (IOT) using alkali-activated binder (AAB) composed of sugarcane bagasse ash and eggshell lime at curing times of 7, 28, 60, 90, 180, and 365 days. Additionally, leaching tests were conducted, along with the examination of possible changes in the chemical and mineralogical composition resulting from exposure to acidic environments. Tests included unconfined compression strength (UCS), leaching, X-ray diffraction, and Fourier-transform infrared spectroscopy for the IOT-AAB mixtures. The highest increase in UCS was observed between 7 and 60 days, reaching 6.47 MPa, with minimal variation thereafter. The AAB-bonded IOT exhibited no metal toxicity over time. Elements Ba, Mn, Pb, and Zn present in IOT and ash were encapsulated in the cemented matrix, with complete encapsulation of all metals observed from 90 days of curing time. The mineralogy of the stabilized/solidified tailings showed no changes resulting from leaching tests. Characteristic bands associated with the presence of N-A-S-H gel were identified in both pre-leaching and post-leaching samples for all curing times analyzed. Exposure to acidic environments altered bands related to carbonate bonds formed in the IOT-AAB mixture.

Proposed simplified methodological approach for designing geopolymer concrete mixtures.

The development of geopolymer concrete offers promising prospects for sustainable construction practices due to its reduced environmental impact compared to conventional Portland cement concrete. However, the complexity involved in geopolymer concrete mix design often poses challenges for engineers and practitioners. In response, this study proposes a simplified approach for designing geopolymer concrete mixtures, drawing upon principles from Portland cement concrete mix design standards and recommended molar ratios of oxides involved in geopolymer synthesis. The proposed methodology aims to streamline the mix design process while optimizing key factors such as chemical composition, alkali activation solution, water content, and curing conditions to achieve desired compressive strength and workability. By leveraging commonalities between Portland cement concrete and geopolymer concrete, this approach seeks to facilitate the adoption of geopolymer concrete in practical construction applications. The proposed mix design guidelines have been validated through examples for concrete cured under different conditions, including outdoor and oven curing. Future research should focus on validating the proposed methodology through experimental studies and exploring cost-effective alternatives for alkali activation solutions to enhance the feasibility and scalability of geopolymer concrete production. Overall, the proposed simplified approach holds promise for advancing the utilization of geopolymer concrete as a sustainable alternative in the construction industry.

Assessment of the chemical composition of buriti (Mauritia flexuosa Liliopsida) and cassava (Manihot esculenta Crantz) residues and their possible application in the bioproduction of coconut aroma (6 pentyl-α-pyrone).

This work aimed to define strategies to increase the bioproduction of 6 pentyl-α-pyrone (bioaroma). As first strategy, fermentations were carried out in the solid state, with agro-industrial residues: Mauritia flexuosa Liliopsida. and Manihot esculenta Crantz in isolation, conducting them with different nutrient solutions having Trichoderma harzianum as a fermenting fungus. Physicochemical characterizations, centesimal composition, lignocellulosic and mineral content and antimicrobial activity were required. Fermentations were conducted under different humidification conditions (water, nutrient solution without additives and nutrient solutions with glucose or sucrose) for 9 days. Bioaroma was quantified by gas chromatography, assisted by solid-phase microextraction. The results showed the low production of this compound in fermentations conducted with sweet cassava (around 6 ppm (w/w)). The low bioproduction with sweet cassava residues can probably be related to its starch-rich composition, homogeneous substrate, and low concentration of nutrients. Already using buriti, the absence of aroma production was detected. Probably the presence of silicon and high lignin content in buriti minimized the fungal activity, making it difficult to obtain the aroma of interest. Given the characteristics presented by the waste, a new strategy was chosen: mixing waste in a 1:1 ratio. This fermentation resulted in the production of 156.24 ppm (w/w) of aroma using the nutrient solution added with glucose. This combination, therefore, promoted more favorable environment for the process, possibly due to the presence of fermentable sugars from sweet cassava and fatty acids from the buriti peel, thus proving the possibility of an increase of around 2500% in the bioproduction of coconut aroma.

A three-years survey of microbial contaminants in industrial hemp inflorescences from two Italian cultivation sites.

BACKGROUND: The use of industrial Cannabis sativa L. for recreational, cosmeceutical, nutraceutical, and medicinal purposes has gained momentum due to its rich content of valuable phytochemicals, such as cannabidiol (CBD) and cannabigerol (CBG). However, there are concerns regarding the risk of microbial contamination in plants grown outside controlled environments. Microbes associated with hemp can be either epiphytes or endophytes and may pose a risk of infectious illness for humans. METHODS: Seven Italian hemp genotypes, including Bernabeo, Carmagnola, Carmaleonte, Codimono, CS, Eletta Campana, and Fibranova, were cultivated in two distinct geographic locations, Catania and Rovigo, for three consecutive years from 2019 to 2021. Total aerobic microbes (TAMC), total combined yeasts/moulds (TYMC), the presence of bile-tolerant Gram-negative bacteria, and the absence of Escherichia coli and Salmonella spp. were evaluated and compared. The main phytocannabinoid content was measured and correlated with microbial contamination. RESULTS: Most samples analyzed in this study did not meet the European Pharmacopoeia microbiological limits. The detection of potential pathogens, such as E. coli and Salmonella spp., in the samples indicates that the use of inflorescences may represent a possible source of infection. Microbial contamination varied among harvesting seasons and production sites, with agroclimatic conditions influencing microbial load and composition. The presence of potentially pathogenic bacteria was less associated with seasonal climate variability and more likely affected by sporadic contamination from external sources. CBD concentration exhibited a negative correlation with bile-tolerant Gram-negative bacteria and total yeasts/moulds levels. Samples with lower CBD content were more contaminated than those with higher CBD levels, suggesting a potential protective effect of this phytochemical on the plant. CONCLUSIONS: The threshing residues (inflorescences, floral bracts, and leaves) of industrial hemp varieties represent a valuable product and a source of beneficial phytochemicals that warrants further exploration. While post-harvest sterilization methods may reduce microbiological risks, they may also degrade heat- and light-sensitive bioactive phytochemicals. The most promising strategy involves implementing best agronomic practices to maintain healthy and uncontaminated cultures. Rigorous monitoring and quality certification protocols are essential to mitigate the microbiological risk associated with the consumption of hemp-derived products.

Synthesis of zeolite from industrial wastes: a review on characterization and heavy metal and dye removal.

Increasing world population, urbanization, and industrialization have led to an increase in demand in production and consumption, resulting in an increase in industrial solid wastes and pollutant levels in water. These two main consequences have become global problems. The high Si and Al content of solid wastes suggests that they can be used as raw materials for the synthesis of zeolites. In this context, when the literature studies conducted to obtain synthetic zeolites are evaluated, it is seen that hydrothermal synthesis method is generally used. In order to improve the performance of the hydrothermal synthesis method in terms of energy cost, synthesis time, and even product quality, additional methods such as alkaline fusion, ultrasonic effect, and microwave support have been developed. The zeolites synthesized by different techniques exhibit superior properties such as high surface area and well-defined pore sizes, thermal stability, high cation exchange capacity, high regeneration ability, and catalytic activity. Due to these specific properties, zeolites are recognized as one of the most effective methods for the removal of pollutants. The toxic properties of heavy metals and dyes in water and their carcinogenic effects in long-term exposure pose a serious risk to living organisms. Therefore, they should be treated at specified levels before discharge to the environment. In this review study, processes including different methods developed for the production of zeolites from industrial solid wastes were evaluated. Studies using synthetic zeolites for the removal of high levels of health and environmental risks such as heavy metals and dyes are reviewed. In addition, EPMA, SEM, EDX, FTIR, BET, AFM, and 29Si and 27Al NMR techniques, which are characterization methods of synthetic zeolites, are presented and the cation exchange capacity, thermodynamics of adsorption, effect of temperature, and pH are investigated. It is expected that energy consumption can be reduced by large-scale applications of alternative techniques developed for zeolite synthesis and their introduction into the industry. It is envisaged that zeolites synthesized by utilizing wastes will be effective in obtaining a green technology. The use of synthesized zeolites in a wide variety of applications, especially in environmental problems, holds great promise.

Recycling of Industrial Waste as Soil Binding Additives-Effects on Soil Mechanical and Hydraulic Properties during Its Stabilisation before Road Construction.

To improve the in situ soil stabilization, different chemical additives are used (ion exchange compounds, additives based on H2SO4 or vinyl polymers, and organic additives using lignosulfonates). One interesting alternative is the production of additives from various waste materials. The extensive testing of waste-based blends with soil was performed; the mechanical (unconfined compressive strength (UCS)) and hydraulic (capillary rise, water absorption, and frost resistance (FR)) soil properties were measured. The optimization process led to obtaining additive compositions ensuring high strength and sealing properties: by-pass ash from the ceramics industry, waste H2SO4, pyrolytic waxes/oils from waste mixed plastics, waste tires and HDPE, and emulsion from chewing gum waste. For sandy soil, the following additives were the most promising: emulsion from pyrolytic wax (EPW) from waste PE foil (WPEF) with the addition of waste H2SO4, pyrolytic-oil emulsion from waste tires, EPW from waste mixed plastics with the addition of "by-pass" waste ash and NaOH, EPW from WPEF with the addition of NaOH, and EPW from WPEF reaching up to 93% FR, a 79.6% 7-day UCS increase, and a 27.6% of 28-day UCS increase. For clay: EPW from WPEF with the addition of NaOH, EPW from WPEF with the addition of waste H2SO4, and solely EPW from WPEF reaching up to 7.5% FR, an 80.7% 7-day UCS increase, and a 119.1% 28-day UCS increase.

Synthesis and characterization of hydroxyapatite nanoparticles from calcium hydroxide fouled with gases evolved from smokestack of glass industry.

In glass industry, the evolved gases and fumes from burning the gas fuel absorbed in calcium hydroxide to minimize the pollution of environment. After a period of time, the calcium hydroxide fouled with sulphate and carbonate as action of the absorbed SO3 and CO2 gases. Based on our interest to treatment the solid waste materials, this study intended to convert the obtained waste of calcium hydroxide fouled with gases to valuable products. Firstly, this waste was treated with water, caustic soda and acids. The results confirmed the conversion of waste to pure calcium sulfate by treatment with 6 v/v% sulfuric acid. Secondly, the obtained calcium sulfate was reacted with ammonium dihydrogen phosphate solution for preparation of calcium hydroxyapatite (HAp) nanoparticles. The produced HAp sample was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and scanning electron microscopy (SEM), thermal gravimetric analysis (TGA) and N2 adsorption measurements. The obtained findings confirmed that the HAp can be produced after calcination at 700 °C, nanorods-like of sizes ranged from 11 to 15 nm and with main surface functional groups of hydroxyapatite. TGA and DTA data indicated that HAp is thermally stable up to 700 °C. Also, the obtained HAp has Ca/P molar ratio of 1.60 and exhibited high total surface area of 146 m2/g with mesoporous structure which make this material can be used in medical and water purification applications.

Solid-state fermentation using wheat bran to produce glucose syrup and functional cereal bars.

Wheat bran is one of the most abundant by-products from grain milling, which can be used as substrate for solid-state fermentation (SSF) to obtain enzymes able to convert this agro-industrial waste into glucose syrup, which in turn can be applied for the production of different food products. The present study aimed to determine centesimal composition of wheat bran, obtain enzymatic extract that converts wheat bran into wheat glucose syrup (WGS), produce rice flakes cereal bars (RFCB), and evaluate their nutritional composition and the presence of functional compounds, as well as their antioxidant potential. Determination of centesimal composition of wheat bran demonstrated its nutritional potential. Enzymatic extract was obtained and it converted wheat bran into WGS, which were applied to rice flakes producing RFCB. These cereal bars proved to be a source of dietary fiber (1.8 g) and soluble protein (7.2 g) while RCFB produced with corn glucose syrup did not present these nutritional components. In addition, RFCB produced with WGS showed polyphenolic compounds, among them flavonoids, which exhibited antioxidant activity by DPPH and ABTS radical scavenging (47.46% and 711.89 µM Trolox Equivalent/g, respectively), and iron ion reduction (71.70 µM Trolox equivalent/g). Final product showed a decrease in caloric value and sodium content. Therefore, the present study showed that the bioprocess of SSF yields a nutritional, ecological, and functional food product, which might be of great interest for food industry, adding nutritional and functional value to a well-stablished product.

Extraction of bioactive compounds from pecan nutshell: An added-value and low-cost alternative for an industrial waste.

The pecan nutshell [Carya illinoinensis (Wangenh) C. Koch] (PNS) is a source of bioactives with important beneficial properties for the human health. PNS represents between 40-50 % of total mass of the nut, resulting as waste without any added value for the food industry. Even though a variety of methods were already developed for bioactive extraction from this waste, unconventional methodologies, or those which apart from green chemistry principles, were discarded considering the cost of production, the sustainable development goals of United Nations and the feasibility of real inclusion of the technology in the food chain. Then, to add-value to this waste, a low-cost, green and easy-scalable extraction methodology was developed based on the determination of seven relevant factors by means of a factorial design and a Response Surface Methodology, allowing the extraction of bioactives with antioxidant capacity. The pecan nutshell extract had a high concentration of phenolic compounds (166 mg gallic acid equivalents-GAE/g dry weight-dw), flavonoids (90 mg catechin equivalent-CE/g dw) and condensed tannins (189 mg CE/g dw) -related also to the polymeric color (74.6 %)-, with high antioxidant capacities of ABTS+. radical inhibition (3665 µmol Trolox Equivalent-TE/g dw) and of iron reduction (1305 µmol TE/g dw). Several compounds associated with these determinations were identified by HPLC-ESI-MS/MS, such as [Epi]catechin-[Epi]catechin-[Epi]gallocatechin, myricetin, dihydroquercetins, dimers A and B of protoanthocyanidins, ellagitannins and ellagic acid derivatives. Hence, through the methodology developed here, we obtained a phenolic rich extract with possible benefits for human health, and of high industrial scalability for this co-product transformation.

Uncovering the recycling potential of industrial waste in Sri Lanka.

The generation of industrial waste is mainly dependent on several factors, including the type of industry, production capacity, technology use and raw materials involved in the manufacturing processes. The present study is a cross-sectional study that was conducted with 580 industries under six industrial sectors in Sri Lanka in 2022. The main objective of this research was to investigate solid waste generation and estimate the recyclable fraction in the waste. Furthermore, this study calculated the prevailing recycling rate of each industrial sector and the waste generation per person employed in the sector. Industrial processes, the types and quantities of waste, waste disposal methods and management activities in terms of recycling and disposal were evaluated through a structured questionnaire and random field observations. The study identified that the composition of selected recyclable items was 16.7% of the total waste generated in the industrial sector. The prevailing rate of recycling in different sectors was as follows: manufacturing of food products (36.6%), manufacturing of beverages (82.3%), manufacturing of textiles (68.6%), manufacturing of chemical and chemical products (28.5%), manufacturing of rubber and plastic (46.5%) and manufacturing of metallic mineral products (17.8%) from the total generated recyclable material. The study further estimated the waste intensity (waste generation per unit of product output) of the industrial sectors as follows: 0.38 (manufacturing of food products), 0.36 (manufacturing of beverages), 0.27 (manufacturing of textiles), 0.26 (manufacturing of chemical and chemical products), 0.17 (manufacturing of rubber and plastic) and 0.16 (manufacturing of non-metallic mineral products).

Exploring the geotechnical and microstructural properties of composite mixtures for landfill liner materials: an experimental investigation.

The present study directs the need for the development of an economical composite mix comprised locally available soil and industrial waste which satisfy the design parameters of the municipal solid waste (MSW) landfill. The local soil, bentonite, and fly ash mixtures are mixed in different proportions to evaluate the geotechnical and microstructural characteristics for suggesting an optimum composite mix that fulfills the design parameters of landfill liners. The curing periods of different mixes are also considered while evaluating the unconfined compressive strength (UCS) characteristics. The microstructure of the mixtures is examined using advanced imaging techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDAX) to gain insights into the changes at the microscale level due to the inclusion of fly ash. It is observed that soil-bentonite-fly ash composite mix in a ratio of 65:15:20 aligns with the optimal design characteristics required for a landfill liner. Notably, for this composite mix, both liquid limit (LL) and plastic limit (PL) show a significant increase of 48.57% and 32.33% respectively, while the optimum moisture content (OMC) rises by 11.25%. Conversely, maximum dry density (MDD) experiences an 8.79% decrease. Moreover, the free swell index (FSI) escalates by 113%, whereas hydraulic conductivity (HC) records a substantial reduction of 96.04%. Moreover, the UCS exhibited a notable increase of 209% after a 28-day curing period. The highest strength is achieved initially by soil mixed with 20% fly ash, followed by a blend containing 15% bentonite. Therefore, proper fly ash content in filler and other binder materials is an effective and sustainable approach that not only solves the disposal issue but also enhances the material's engineering characteristics, justifying its suitability to be used as a landfill liner.

Influence of kaolin and red clay on ceramic specimen properties when galvanic sludge is incorporated to encapsulate heavy metals.

This study presented the influence of two types of clay: kaolin (Kao) and red clay (RC) on the chemical and physical properties of ceramic specimens when galvanic sludge (GS) is incorporated to encapsulate heavy metals. Samples were obtained of GS from the industrial district of Manaus - Amazonas State, Brazil, and kaolin (Kao), and red clay (RC) from the Central Amazon. A fourth sample was prepared by mixing GS, Kao, and RC in the ratio 1:1:8 (GS + Kao + RC). This mixture was ground, and ceramic specimens were prepared, and heat treated at 950 °C and 1200 °C for three hours for phase detection, compressive strength, leaching of Fe, Ni and Cr metals and life cycle assessment. Galvanic sludge, Kao, and RC were also, and heat treated to at 950 °C and 1200 °C for three hours, obtaining GS950, GS1200, Kao950, Kao1200, RC950, and RC1200. The samples were submitted to XRF, XRD, Rietveld refinement, Mössbauer spectroscopy, TG/DTG/DSC, and SEM. The results show that the formation of nickel oxide and a spinel solid solution of the type Fe3+{Fe1-y3+,Fe1-x2+,Nix2+,Cry3+}O4 (in which [] = tetrahedral site, {} octahedral site) occurs in GS1200, which is caused by sulfate decomposition to SO2. At 1200 °C, heavy metals are encapsulated, forming other phases such as nickel silicate and hematite. Life cycle assessment was used to verify the sustainability and value of GS in clay for making bricks, and it indicated that the production of ceramics is feasible, reduces the use of clays, and is sustainable.

Fabrication and Properties of the Montmorillonite/Nanobioglass Hybrid Reinforcement from Agroindustrial Waste for Bone Regeneration.

Nowadays, bone systems have a series of consequences that compromise the quality of life mainly due to wear and decreased bioactivity, generally in elderly people and children. In this context, the combination of montmorillonite (MMT-NPs) in a vitreous system such as nanobioglass facilitates the adsorption of biomolecules on the surface and within the interlamellar spaces, enabling the entry of ions by a cation exchange process focusing on increasing the rate of bone formation. This work aims to synthesize and characterize an eco-friendly hybrid reinforcement containing MMT-NPs with nanobioglass doped with magnesium nanoparticles (MgNPs-BV). In this way, MMT-NPs@MgNPs-BV was synthesized by the impregnation method, where an experimental design was used to verify the synthesis conditions. The ideal condition by experimental design was carried out in terms of the characterization and biological activity, where we demonstrated MMT-NPs of 30% w w-1, MgNPs-BV of 6% w w-1, and a calcination temperature of 1273.15 K with a cell viability around 66.87%, an average crystallite diameter of 12.5 nm, and a contact angle of 17.7°. The characterizations confirmed the impregnation method with an average particle size of 51.4 ± 13.1 nm. The mechanical tests showed a hardness of 2.6 GPa with an apparent porosity of 22.2%, similar to human bone. MMT-NPs@MgNPs-BV showed a cell proliferation of around 96% in osteoblastic cells (OFCOL II), with the formation of the apatite phase containing a relation of Ca/P of around 1.63, a biodegradability of 82%, and rapid release of ions with a Ca/P ratio of 1.42. Therefore, the eco-friendly hybrid reinforcement with MMT-NPs and MgNPs-BV shows potential for application with a matrix for biocompatible nanocomposites for bone regeneration.

Sustainable Application of Waste Sludges from the Wastewater Treatment Plant Generated during the Production of Heating Devices in the Construction Industry.

This research presented, for the first time, the results of the successful application of the waste press sludges, WSLP (plant for lacquer and paint) and WSEP (powdery enamel plant), from a wastewater treatment plant generated during heating device production in the construction industry. The results of WSEP characterization and its influence on cement paste, mortar, and concrete properties showed that this material could be used as a cement replacement (with a maximum replacement amount of 20%) in producing mortar and concrete. Although waste WSLP sludge does not possess pozzolanic properties and does not meet the criteria prescribed by the standards for application in mortar and concrete due to its chemical inertness and fineness, as well as its extended setting time, it can be used as a replacement for stone filler or other powdered mineral admixture in the production of self-compacting concrete (SCC) in amounts up to 100%, with a maximum quantity of up to 100 kg/m3. The obtained results indicate that with the appropriate conversion, waste sludges, despite representing hazardous waste, can be used as safe products in the construction industry; i.e., the waste material can become a useful and valuable raw material by applying (respecting) all of the principles of the green economy.

High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes.

The article presents the possibility of increasing the water resistance of gypsum binders (GBs) obtained based on synthetic gypsum by introducing additives derived from industrial wastes. Regularities were obtained for the influence of the type and amount of additives on the water/gypsum ratio (W/G), strength indicators and water resistance of high-strength GB. The introduction of a single-component additive to improve water resistance does not have a significant effect. Complex additives based on Portland cement, granulated blast-furnace slag, electric steel-smelting slag, expanded clay dust and granite screenings of various fractions have been developed that make the maximum contribution to improving the water resistance of a high-strength GB based on synthetic calcium sulphate dihydrate, which made it possible to increase the water-resistance coefficient from 0.39 to 0.82.

Review on the modifications of natural and industrial waste CaO based sorbent of calcium looping with enhanced CO2 capture capacity.

The calcium looping cycle (CaL) possesses outstanding CO2 capture capacity for future carbon-capturing technologies that utilise CaO sorbents to capture the CO2 in a looping cycle. However, sorbent degradation and the presence of inert materials stabilise the sorbent, thereby reducing the CO2 capture capacity. Consequently, the CaO sorbent that has degraded must be replenished, increasing the operational cost for industrial use. CaO sorbents have been modified to enhance their CO2 capture capacity and stability. However, various CaO sorbents, including limestone, dolomite, biogenesis calcium waste and industrial waste, exhibit distinct behaviour in response to these modifications. Thus, this work comprehensively reviews the CO2 capture capacity of sorbent improvement based on various CaO sorbents. Furthermore, this study provides an understanding of the effects of CO2 capture capacity based on the properties of the CaO sorbent. The properties of various CaO sorbents, such as surface area, pore volume, particle size and morphology, are influential in exhibiting high CO2 capture capacity. This review provides insights into the future development of CaL technology, particularly for carbon-capturing technologies that focus on the modifications of CaO sorbents and the properties that affect the CO2 capture capacity.

Innovations in Food Packaging for a Sustainable and Circular Economy.

Packaging is fundamental to maintaining the quality of food, but its contribution with a negative footprint to the environment must be completely changed worldwide to reduce pollution and climate change. Innovative and sustainable packaging and new strategies of reutilization are necessary to reduce plastic waste accumulation, maintain food quality and safety, and reduce food losses and waste. The purpose of this chapter is to present innovations in food packaging for a sustainable and circular economy. First, to present the eco-design packaging approach as well as new strategies for recycled or recyclable materials in food packaging. Second, to show current trends in new packaging materials developed from the use of agro-industrial wastes as well as new methods of production, including 3D/4D printing, electrostatic spinning, and the use of nanomaterials.

Identification of Cellulose-Degrading Bacteria and Assessment of Their Potential Value for the Production of Bioethanol from Coconut Oil Cake Waste.

Bioconversion of lignocellulosic biomass is a highly promising alternative to rapidly reduce reliance on fossil fuels and greenhouse gas emissions. However, the use of lignocellulosic biomass is limited by the challenges of efficient degradation strategies. Given this need, Bacillus tropicus (B. tropicus) with cellulose degradation ability was isolated and screened from rotten dahlia. The strain efficiently utilized coconut oil cake (COC) to secrete 167.3 U/mL of cellulase activity. Electron microscopy results showed significant changes in the structure and properties of cellulose after treatment with B. tropicus, which increased the surface accessibility and the efficiency of the hydrolysis process. The functional group modification observed by Fourier transform infrared spectroscopy indicated the successful depolymerization of COC. The X-ray diffraction pattern showed that the crystallinity index increased from 44.8% to 48.2% due to the hydrolysis of the amorphous region in COC. The results of colorimetry also reveal an efficient hydrolysis process. A co-culture of B. tropicus and Saccharomyces cerevisiae was used to produce ethanol from COC waste, and the maximum ethanol yield was 4.2 g/L. The results of this work show that B. tropicus can be used to prepare biotechnology value-added products such as biofuels from lignocellulosic biomass, suggesting promising utility in biotechnology applications.

Slaughterhouse by-products composting: can microorganisms inoculum addition mitigate final compost odor emission?

Small slaughterhouses generate biowaste, which for economic reasons, is generally destined for composting. Inoculating appropriate microorganisms can improve biodegradation efficiency and mitigate odor generation during the composting process and can give rise to composts with neutral or pleasant odors. Therefore, the aim of this study was to compare the odor intensity reduction of compost generated with and without a formulated inoculum (Saccharomyces cerevisiae, Bacillus subtilis, and Rhodopseudomonas palustris). A set of experimental data was collected and analyzed according to the German "Verein Deutscher Ingenieure" odor protocol. The results showed that adding microorganisms was effective in reducing unpleasant odors in all three composts generated from swine, cattle, and poultry slaughterhouse by-products during both summer and winter seasons. Additionally, soil odor was predominant in composts that were inoculated in the two tested seasons (i.e., summer and winter). On the other hand, composts without inoculation had odors similar to peat for swine compost, ammonia for cattle compost, and manure for poultry compost, regardless of the season tested. Overall, composting process with appropriate inoculum can help in the correct disposal of slaughterhouse wastes by transforming organic matter into composts, which can have economic and environmental value as a soil conditioner and/or fertilizer.

Coproduction of alkaline protease and xylanase from genetically modified Indonesian local Bacillus halodurans CM1 using corncob as an inducing substrate.

The production of corn generates a substantial amount of agro-industrial waste, with corncob accounting for a significant portion of this waste. In this study, we focused on utilizing corncob as a carbon source and inducer to simultaneously produce two valuable industrial enzymes, protease, and xylanase, using a recombinant strain of B. halodurans CM1. Interestingly, xylan-rich corncob not only enhanced the xylanase activity but also induced protease activity of the modified B. halodurans CM1 strain. The effect of corncob concentration on the coproduction of protease and xylanase was investigated. Corncob with 6 % concentration induced protease activity of 1020.7 U/mL and xylanase activity of 502.8 U/mL in a 7 L bioreactor under the condition of 1 vvm aeration, 250 rpm agitation, 37 °C temperature, initial pH 9.0, and 40 h incubation period. The protease produced was an alkalothermophilic enzyme whose highest activity was at pH 12 and 50 °C, and it belonged to a serine protease family. This alkalothermophilic protease's activity to some degree was reduced by Co2+, Mg2+, Fe2+, Zn2+, and K+, but enhanced by Ca2+ and Ni2+ (at 5 mM). The protease was stable even under the presence of a 15 % concentration of acetone, DMSO, ethanol, and isopropyl alcohol. The protease activity at 30 °C was not considerably changed by the presence of detergent, indicating excellent potential as a washing detergent additive. According to these findings, corncob has the potential to be a substrate for the coproduction of protease and xylanase, which have a wide range of industrial uses.