Analysis of Vibration Signals Based on Machine Learning for Crack Detection in a Low-Power Wind Turbine.

Currently, renewable energies, including wind energy, have been experiencing significant growth. Wind energy is transformed into electric energy through the use of wind turbines (WTs), which are located outdoors, making them susceptible to harsh weather conditions. These conditions can cause different types of damage to WTs, degrading their lifetime and efficiency, and, consequently, raising their operating costs. Therefore, condition monitoring and the detection of early damages are crucial. One of the failures that can occur in WTs is the occurrence of cracks in their blades. These cracks can lead to the further deterioration of the blade if they are not detected in time, resulting in increased repair costs. To effectively schedule maintenance, it is necessary not only to detect the presence of a crack, but also to assess its level of severity. This work studies the vibration signals caused by cracks in a WT blade, for which four conditions (healthy, light, intermediate, and severe cracks) are analyzed under three wind velocities. In general, as the proposed method is based on machine learning, the vibration signal analysis consists of three stages. Firstly, for feature extraction, statistical and harmonic indices are obtained; then, the one-way analysis of variance (ANOVA) is used for the feature selection stage; and, finally, the k-nearest neighbors algorithm is used for automatic classification. Neural networks, decision trees, and support vector machines are also used for comparison purposes. Promising results are obtained with an accuracy higher than 99.5%.

Optimum k-Nearest Neighbors for Heading Synchronization on a Swarm of UAVs under a Time-Evolving Communication Network.

Heading synchronization is fundamental in flocking behaviors. If a swarm of unmanned aerial vehicles (UAVs) can exhibit this behavior, the group can establish a common navigation route. Inspired by flocks in nature, the k-nearest neighbors algorithm modifies the behavior of a group member based on the k closest teammates. This algorithm produces a time-evolving communication network, due to the continuous displacement of the drones. Nevertheless, this is a computationally expensive algorithm, especially for large groups. This paper contains a statistical analysis to determine an optimal neighborhood size for a swarm of up to 100 UAVs, that seeks heading synchronization using a simple P-like control algorithm, in order to reduce the calculations on every UAV, this is especially important if it is intended to be implemented in drones with limited capabilities, as in swarm robotics. Based on the literature of bird flocks, that establishes that the neighborhood of every bird is fixed around seven teammates, two approaches are treated in this work: (i) the analysis of the optimum percentage of neighbors from a 100-UAV swarm, that is necessary to achieve heading synchronization, and (ii) the analysis to determine if the problem is solved in swarms of different sizes, up to 100 UAVs, while maintaining seven nearest neighbors among the members of the group. Simulation results and a statistical analysis, support the idea that the simple control algorithm behaves like a flock of starlings.

Rice Labeling according to Grain Quality Features Using Laser-Induced Breakdown Spectroscopy.

Rice is an important source of nutrition and energy consumed around the world. Thus, quality inspection is crucial for protecting consumers and increasing the rice's value in the productive chain. Currently, methods for rice labeling depending on grain quality features are based on image and/or visual inspection. These methods have shown subjectivity and inefficiency for large-scale analyses. Laser-induced breakdown spectroscopy (LIBS) is an analytical technique showing attractive features due to how quick the analysis can be carried out and its capability of providing spectra that are true fingerprints of the sample's elemental composition. In this work, LIBS performance was evaluated for labeling rice according to grain quality features. The LIBS spectra of samples with their grain quality numerically described as Type 1, 2, and 3 were measured. Several spectral processing methods were evaluated when modeling a k-nearest neighbors (k-NN) classifier. Variable selection was also carried out by principal component analysis (PCA), and then the optimal k-value was selected. The best result was obtained by applying spectrum smoothing followed by normalization by using the first fifteen principal components (PCs) as input variables and k = 9. Under these conditions, the method showed excellent performance, achieving sample classification with 94% overall prediction accuracy. The sensitivities ranged from 90 to 100%, and specificities were in the range of 92-100%. The proposed method has remarkable characteristics, e.g., analytical speed and analysis guided by chemical responses; therefore, the method is not susceptible to subjectivity errors.

A Small World Graph Approach for an Efficient Indoor Positioning System.

The main goal of an Indoor Positioning System (IPS) is to estimate the position of mobile devices in indoor environments. For this purpose, the primary source of information is the signal strength of packets received by a set of routers. The fingerprint technique is one of the most used techniques for IPSs. By using supervised machine learning techniques, it trains a model with the received signal intensity information so it can be used to estimate the positions of the devices later in an online phase. Although the k-Nearest Neighbors (kNN) is one of the most widely used classification methods due to its accuracy, it has no scalability since a sample that needs to be classified must be compared to all other samples in the training database. In this work, we use a novel hierarchical navigable small world graph technique to build a search structure so the location of a sample can be efficiently found, allowing the IPSs to be used in large-scale scenarios or run on devices with limited resources. To carry out our performance evaluation, we proposed a synthetic IPS dataset generator as well as implemented a complete real-world, large-scale IPS testbed. We compared the performance of our graph-based solution with other known kNN variants, such as Kd-Tree and Ball-Tree. Our results clearly show the performance gains of the proposed solution at 98% when compared to the classic kNN and at least 80% when compared to tree-based approaches.

Regression Models for Symbolic Interval-Valued Variables.

This paper presents new approaches to fit regression models for symbolic internal-valued variables, which are shown to improve and extend the center method suggested by Billard and Diday and the center and range method proposed by Lima-Neto, E.A.and De Carvalho, F.A.T. Like the previously mentioned methods, the proposed regression models consider the midpoints and half of the length of the intervals as additional variables. We considered various methods to fit the regression models, including tree-based models, K-nearest neighbors, support vector machines, and neural networks. The approaches proposed in this paper were applied to a real dataset and to synthetic datasets generated with linear and nonlinear relations. For an evaluation of the methods, the root-mean-squared error and the correlation coefficient were used. The methods presented herein are available in the the RSDA package written in the R language, which can be installed from CRAN.

A Method for Chlorophyll-a and Suspended Solids Prediction through Remote Sensing and Machine Learning.

Total Suspended Solids (TSS) and chlorophyll-a concentration are two critical parameters to monitor water quality. Since directly collecting samples for laboratory analysis can be expensive, this paper presents a methodology to estimate this information through remote sensing and Machine Learning (ML) techniques. TSS and chlorophyll-a are optically active components, therefore enabling measurement by remote sensing. Two study cases in distinct water bodies are performed, and those cases use different spatial resolution data from Sentinel-2 spectral images and unmanned aerial vehicles together with laboratory analysis data. In consonance with the methodology, supervised ML algorithms are trained to predict the concentration of TSS and chlorophyll-a. The predictions are evaluated separately in both study areas, where both TSS and chlorophyll-a models achieved R-squared values above 0.8.

Pelvic floor pressure distribution profile in urinary incontinence: a classification study with feature selection.

BACKGROUND: Pelvic floor pressure distribution profiles, obtained by a novel instrumented non-deformable probe, were used as the input to a feature extraction, selection, and classification approach to test their potential for an automatic diagnostic system for objective female urinary incontinence assessment. We tested the performance of different feature selection approaches and different classifiers, as well as sought to establish the group of features that provides the greatest discrimination capability between continent and incontinent women. METHODS: The available data for evaluation consisted of intravaginal spatiotemporal pressure profiles acquired from 24 continent and 24 incontinent women while performing four pelvic floor maneuvers: the maximum contraction maneuver, Valsalva maneuver, endurance maneuver, and wave maneuver. Feature extraction was guided by previous studies on the characterization of pressure profiles in the vaginal canal, where the extracted features were tested concerning their repeatability. Feature selection was achieved through a combination of a ranking method and a complete non-exhaustive subset search algorithm: branch and bound and recursive feature elimination. Three classifiers were tested: k-nearest neighbors (k-NN), support vector machine, and logistic regression. RESULTS: Of the classifiers employed, there was not one that outperformed the others; however, k-NN presented statistical inferiority in one of the maneuvers. The best result was obtained through the application of recursive feature elimination on the features extracted from all the maneuvers, resulting in 77.1% test accuracy, 74.1% precision, and 83.3 recall, using SVM. Moreover, the best feature subset, obtained by observing the selection frequency of every single feature during the application of branch and bound, was directly employed on the classification, thus reaching 95.8% accuracy. Although not at the level required by an automatic system, the results show the potential use of pelvic floor pressure distribution profiles data and provide insights into the pelvic floor functioning aspects that contribute to urinary incontinence.

Characterization of Brazilian coffee based on isotope ratio mass spectrometry (δ13C, δ18O, δ2H, and δ15N) and supervised chemometrics.

Authentication of ground coffee has become an important issue because of fraudulent activities in the sector. In the current work, sixty-seven Brazilian coffees produced in different geographical origins using organic (ORG, n = 25) and conventional (CONV, n = 42) systems were analyzed for their stable isotope ratios (δ13C, δ18O, δ2H, and δ15N). Data were analyzed by inferential analysis to compare the factors whereas linear discriminant analysis (LDA), k-nearest neighbors (k-NN), and support vector machines (SVM) were used to classify the coffees based on their origin. ORG and CONV cultivated coffees could not be differentiated according to C stable isotope ratio (δ13C; p = 0.204), but ORG coffees presented higher values of the N stable isotope ratio (δ15N; p = 0.0006). k-NN presented the best classification results for both ORG and CONV coffees (87% and 67%, respectively). SVM correctly classified coffees produced in São Paulo (75% accuracy), while LDA correctly classified 71% of coffees produced in Minas Gerais.

False Positive Reduction by an Annular Model as a Set of Few Features for Microcalcification Detection to Assist Early Diagnosis of Breast Cancer.

Early automatic breast cancer detection from mammograms is based on the extraction of lesions, known as microcalcifications (MCs). This paper proposes a new and simple system for microcalcification detection to assist in early breast cancer detection. This work uses the two most recognized public mammogram databases, MIAS and DDSM. We are introducing a MC detection method based on (1) Beucher gradient for detection of regions of interest (ROIs), (2) an annulus model for extraction of few and effective features from candidates to MCs, and (3) one classification stage with two different classifiers, k Nearest Neighbor (KNN) and Support Vector Machine (SVM). For dense mammograms in the MIAS database, the performance metrics achieved are sensitivity of 0.9835, false alarm rate of 0.0083, accuracy of 0.9835, and area under the ROC curve of 0.9980 with a KNN classifier. The proposed MC detection method, based on a KNN classifier, achieves, a sensitivity, false positive rate, accuracy and area under the ROC curve of 0.9813, 0.0224, 0.9795 and 0.9974 for the MIAS database; and 0.9035, 0.0439, 0.9298 and 0.9759 for the DDSM database. By slightly reducing the true positive rate the method achieves three instances with false positive rate of 0: 2 on fatty mammograms with KNN and SVM, and one on dense with SVM. The proposed method gives better results than those from state of the art literature, when the mammograms are classified in fatty, fatty-glandular, and dense.

Statistical analysis of wheat under different seed treatments: development of a discriminative model based on physicochemical and rheological properties.

BACKGROUND: Quality control in the wheat industry comprises numerous analyses that are time-consuming and demand numerous procedures and specific apparatus. The application of multivariate calibration techniques contributes to the interpretation of the data generated during these analyses. The present study aimed to correlate a representative number of wheat properties with the treatment applied to the wheat seeds using multivariate calibration techniques. RESULTS: In the present study, a wheat pilot planting experiment applying different fungicides combination as a seed treatment (carbendazim, carbendazim + thiram, carboxin + thiram, and triadimenol) was conducted. The resulting wheat grains were subjected to 33 analyses routinely performed in industry. A principal components analysis indicated all analyses were relevant for the different seed treatment discrimination. Afterwards, a k-nearest neighbors discriminative model was developed and was able to classify the seed treatments. In accordance with this model, the most relevant variables for the seed treatment discrimination were the rheological properties of the dough. CONCLUSION: It was possible to develop a discriminative model that directly correlated the wheat seed treatment with the properties of the resulting grains and flours. © 2017 Society of Chemical Industry.