Effects of Laser Treatment of Terbium-Doped Indium Oxide Thin Films and Transistors.

In this study, a KrF excimer laser with a high-absorption coefficient in metal oxide films and a wavelength of 248 nm was selected for the post-processing of a film and metal oxide thin film transistor (MOTFT). Due to the poor negative bias illumination stress (NBIS) stability of indium gallium zinc oxide thin film transistor (IGZO-TFT) devices, terbium-doped Tb:In2O3 material was selected as the target of this study. The XPS test revealed the presence of both Tb3+ and Tb4+ ions in the Tb:In2O3 film. It was hypothesized that the peak of the laser thermal effect was reduced and the action time was prolonged by the f-f jump of Tb3+ ions and the C-T jump of Tb4+ ions during the laser treatment. Studies related to the treatment of Tb:In2O3 films with different laser energy densities have been carried out. It is shown that as the laser energy density increases, the film density increases, the thickness decreases, the carrier concentration increases, and the optical band gap widens. Terbium has a low electronegativity (1.1 eV) and a high Tb-O dissociation energy (707 kJ/mol), which brings about a large lattice distortion. The Tb:In2O3 films did not show significant crystallization even under laser energy density treatment of up to 250 mJ/cm2. Compared with pure In2O3-TFT, the doping of Tb ions effectively reduces the off-state current (1.16 × 10-11 A vs. 1.66 × 10-12 A), improves the switching current ratio (1.63 × 106 vs. 1.34 × 107) and improves the NBIS stability (ΔVON = -10.4 V vs. 6.4 V) and positive bias illumination stress (PBIS) stability (ΔVON = 8 V vs. 1.6 V).

Stability mechanism of Monascus pigment-soy protein isolate-maltodextrin complex.

BACKGROUND: Monascus pigment (MP) is a natural food coloring with vital physiological functions but prone to degradation and color fading under light conditions. RESULTS: This study investigated the effect of complex formation of soybean protein isolate (SPI), maltodextrin (MD), and MP on the photostability of MP. Light stability was assessed through retention rate and color difference. Fluorescence spectroscopy (FS), circular dichroism (CD), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) explored MP, SPI, and MD interactions, clarifying the MP-SPI-MD complex mechanism on the light stability of MP. Microstructure and differential scanning calorimetry (DSC) analyzed the morphology and thermal properties. The retention rate of MP increased to approximately 80%, and minimal color difference was observed when adding SPI and MD simultaneously. FS revealed hydrophobic interaction between MP and SPI. FTIR analysis showed intensity changes and peak shifts in amide I band and amide II band, which proved the hydrophobic interaction. CD showed a decrease in α-helix content and an increase in ß-sheet content after complex formation, indicating strengthened hydrogen bonding interactions. Scanning electron microscopy (SEM) analysis demonstrated that MP was attached to the surface and interior of complexes. XRD showed MP as crystalline, while SPI and MD were amorphous, complexes exhibited weakened or absent peaks, suggesting MP encapsulation. The results of DSC were consistent with XRD. CONCLUSION: SPI and MD enveloped MP through hydrogen bonding and hydrophobic interaction, ultimately enhancing its light stability and providing insights for pigment-protein-polysaccharide interactions and improving pigment stability in the food industry. © 2024 Society of Chemical Industry.

Exceptional Stability against Water, UV Light, and Heat for CsPbBr3@Pb-MOF Composites.

All-inorganic lead halide perovskite nanocrystals (NCs) have been widely applied in optoelectronic devices owing to their excellent photoluminescence (PL) properties. However, poor stability upon exposure to water, UV light or heat strongly limits their practical application. Herein, CsPbBr3@Pb-MOF composites with exceptional stability against water, UV light, and heat are synthesized by ultrasonic processing the precursors of lead-based MOF (Pb-MOF), oleylammonium bromide (OAmBr) and cesium oleate (Cs-OA) solutions at room temperature. Pb-MOF can not only provide the lead source for the in situ growth of CsPbBr3 NCs, but also the protective layer of perovskites NCs. The formed CsPbBr3@Pb-MOF composites show a considerable PL quantum yield (PLQY) of 67.8%, and can maintain 90% of the initial PL intensity when immersed in water for 2 months. In addition, the outstanding PL stability against UV light and heat is demonstrated with CsPbBr3 NCs synthesized by the conventional method as a comparison. Finally, a green (light-emitting diode) LED is fabricated using green-emitting CsPbBr3@Pb-MOF composites and exhibits excellent stability without packaging when immersed in water for 30 days. This study provides a practical approach to improve the stability in aqueous phase, which may pave the way for future applications for various optoelectronic devices.

Nitrogen and sulfur co-doped carbon quantum dots as "on-off-on" fluorescence probes to detect Hg2+ and MnO4- and improving the photostability of Rhodamine B.

BACKGROUND: Carbon quantum dot (CQDs) are zero-dimensional carbon nanomaterials with a size of less than 10 nm CQDs are widely used in the field of ion detection by virtue of their fluorescence characteristics such as strong fluorescence intensity, good optical stability and tunable emission wavelength. Although the traditional atomic absorption method, electrochemical method and other metal ion detection methods are highly sensitive, the operation is complex, expensive and limited by the site. Therefore, we prepared the N, S-CQDs capable of detecting Hg2+ and MnO4- in water with the advantages of simple operation, low cost, and direct visual signal. RESULTS: N, S-CQDs with high-quantum yield (77.68%), uniform particle size (0.4 nm-2.6 nm) and green fluorescence were created utilizing a one-pot hydrothermal process with the precursors ASDA-Na4 and m-phenylenediamine. N, S-CQDs has good optical properties such as high fluorescence intensity, wavelength independence, up-conversion luminescence and fluorescence stability. We examined 27 common ions in water and found that the fluorescence of N, S-CQDs could be selectively quenched by Hg2+ and MnO4-, and the detection limits are 0.41 µM and 1.2 µM, respectively. The mechanism of quenching is further investigated. The fluorescence of N, S-CQDs-Hg2+ system can be restored by halogen ions (Cl-, Br-, I-), while the fluorescence of N, S-CQDs-MnO4- system can be partially restored by Fe2+. This forms an "on-off-on" mode of fluorescent probes. In addition, we also studied that trace amounts of N, S-CQDs can improve the photostability of RhB. SIGNIFICANCE: The N, S-CQDs are fluorescent probes in an "on-off-on" mode. N, S-CQDs with green fluorescence (on) can be quenched by Hg2+ and MnO4- (off). The fluorescence quenched by Hg2+ can be restored by halogen ions again, while the fluorescence quenched by MnO4- can partially be restored (on). This ion detection method can be used to visually detect the two ions in the field, with the advantages of low cost, simple operation and visual intuition.

Perovskite Solar Cell Using Isonicotinic Acid as a Gap-Filling Self-Assembled Monolayer with High Photovoltaic Performance and Light Stability.

High photovoltaic performance and light stability are required for the practical outdoor use of lead-halide perovskite solar cells. To improve the light stability of perovskite solar cells, it is effective to introduce a self-assembled monolayer (SAM) between the carrier transport layer and the perovskite layer. Several alternative approaches in their molecular design and combination with multiple SAMs support high photovoltaic conversion efficiency (PCE). Herein, we report a new structure for improving both PCE and light stability, in which the surface of an electron transport layer (ETL) was modified by combining a fullerene-functionalized self-assembled monolayer (C60SAM) and a suitable gap-filling self-assembled monolayer (GFSAM). Small-sized GFSAMs can enter the gap space of the C60SAM and terminate the unterminated sites on the ETL surface. The best GFSAM in this study was formed using an isonicotinic acid solution. After a light stability test for 68 h at 50 °C under 1 sun illumination, the best cell with C60SAM and GFSAM showed a PCE of 18.68% with a retention rate of over 99%. Moreover, following outdoor exposure for six months, the cells with C60SAM and GFSAM exhibited almost unchanged PCE. From the valence band spectra of the ETLs obtained using hard X-ray photoelectron spectroscopy, we confirmed a decrease in the offset at the ETL/perovskite interface owing to the additional GFSAM treatment on the C60SAM-modified ETL surface. Time-resolved microwave conductivity measurements demonstrated that the additional GFSAM improved electron extraction at the C60SAM-modified ETL/perovskite interface.

Stability Kinetics of Anthocyanins of Grumixama Berries (Eugenia brasiliensis Lam.) during Thermal and Light Treatments.

Grumixama (Eugenia brasiliensis Lam.) are red-colored fruits due to the presence of anthocyanins. In this paper, anthocyanin-rich extracts from grumixama were submitted to different temperatures and light irradiations, with the aim of investigating their stabilities. The thermal stability data indicated that a temperature range from 60 to 80 °C was critical to the stability of the anthocyanins of the grumixama extracts, with a temperature quotient value (Q10) of 2.8 and activation energy (Ea) of 52.7 kJ/mol. The anthocyanin-rich extracts of grumixama fruits showed the highest stability during exposure to incandescent irradiation (50 W), followed by fluorescent radiation (10 W). The t1/2 and k were 59.6 h and 0.012 h-1 for incandescent light, and 45.6 h and 0.015 h-1 for fluorescent light. In turn, UV irradiation (25 W) quickly degraded the anthocyanins (t1/2 = 0.18 h and k = 3.74 h-1). Therefore, grumixama fruits, and their derived products, should be handled carefully to avoid high temperature (>50 °C) and UV light exposure in order to protect the anthocyanins from degradation. Furthermore, grumixama fruits showed high contents of anthocyanins that can be explored as natural dyes; for example, by food, pharmaceutical and cosmetic industries. In addition, the results of this study may contribute to the setting of processing conditions and storage conditions for grumixama-derived fruit products.

Cinnamate-Functionalized Cellulose Nanocrystals as Interfacial Layers for Efficient and Stable Perovskite Solar Cells.

The poor interfacial contact and imperfections between the charge transport layer and perovskite film often result in carrier recombination, inefficient charge collection, and inferior stability of perovskite solar cells (PSCs). Therefore, interface engineering is quite crucial to achieve high-performance and stable PSCs. Here, we introduced a cinnamate-functionalized cellulose nanocrystals (Cin-CNCs) interfacial layer between SnO2 and perovskite active layer for enhancing carrier transport ability and crystal growth of perovskite, meanwhile endowing additional functional of long-term device stability against ultraviolet light. The enhancement of interfacial contact between SnO2 and perovskite layer and cascade energy alignment are realized, which is beneficial for obtaining the desirable perovskite film morphology, passivating the interfacial defects, and restraining charge recombination in the SnO2/perovskite interface. An efficiency as high as 23.18%, with an open-circuit voltage of 1.15 V and a significantly enhanced fill factor of 81.07%, is achieved. In addition, the unencapsulated PSCs maintain 75% of the initial PCE after aging for over 1500 h under 25 °C and 30% relative humidity, with better light-soaking stability. These results exhibit the vital role for Cin-CNCs in interfacial modification and constructing high-performance perovskite solar cells.

Continuous Modification of Perovskite Film by a Eu Complex to Fabricate the Thermal and UV-Light-Stable Solar Cells.

Perovskite solar cells (PSCs) with simple and low-cost processability have shown promising photovoltaic performances. However, internal defects, external UV light, and heat sensitivity are principal obstacles on their way toward commercialization. Herein, we prepare an Eu complex and directly dope it into the perovskite precursor as a UV filter to decrease the photodegradation of PSCs. The formation of hydrogen bonds between the organic cation of perovskite and the -CF3 in the Eu complex could restrain the escape of organic cations under heating. The Eu complex acts as a redox shuttle to reduce metallic lead (Pb0) and iodine (I0) defects when the PSCs have a long-time operation. Additionally, the ligand-containing aromatic rings could reduce the trace amount of I0 existing as electronic defects in perovskites and together with the long alkyl chain retard the moisture immersion into the PSCs. The best efficiency of PSCs modified by the Eu complex improves up to 20.9%. The excellent thermal stability and UV-light resistance are also realized. This strategy provides a method to design a passivator which continuously modifies the imperfections and inhibits the chemical chain reactions in perovskite film, thereby enhancing the performance and stability of PSCs.

Restricting the Formation of Pb-Pb Dimer via Surface Pb Site Passivation for Enhancing the Light Stability of Perovskite.

Poor light stability hinders the potential applications of perovskite optoelectronic devices. Recent experiments have demonstrated that the passivation surface via forming strong chemical bonds (SO4 -Pb, PO4 -Pb, Cl-Pb, O-Pb, and S-Pb) could effectively improve the light stability of perovskite solar cells. However, the underlying reasons are not clear. Herein, the elusive underlying mechanisms of light stability enhancement are explained in detail using first principles calculations. The small polaron model and self-trapped exciton model demonstrate that an iodine vacancy defect on the surface of perovskite could trap a free electron under light illumination, which leads to a significant rearrangement of the Pb-I lattice and creats a new chemical species, i.e., a Pb-Pb dimer bound in the typical perovskite of CH3 NH3 PbI3 . The Pb-Pb dimer distorts the Pb-I octahedral lattice and reduces the defect formation energy of the I atoms. The surface Pb site passivation can prevent the formation of the Pb-Pb dimer, thereby improving the light stability. In addition, the strong ionic bond could better stabilize the Pb site. The in-depth understanding of the light stability and the passivation mechanism in this study can promote the application of perovskite optoelectronic devices.

Multifunctional Silver(I) Complexes with Metronidazole Drug Reveal Antimicrobial Properties and Antitumor Activity against Human Hepatoma and Colorectal Adenocarcinoma Cells.

Silver salts and azole derivatives are well known for their antimicrobial properties. Recent evidence has demonstrated also their cytotoxic and genotoxic potential toward both normal and cancer cells. Still, little is known about the action of complexes of azoles with silver(I) salts. Thus, the goal of the study was to compare the chemical, cytotoxic and antimicrobial properties of metronidazole complexes with silver(I) nitrate and silver(I) sulfate to metronidazole and pure silver(I) salts. We synthetized a novel complex, [Ag(MTZ)2]2SO4, and confirmed its chemical structure and properties using 1H and 13C NMR spectroscopy and X-Ray, IR and elemental analysis. To establish the stability of complexes [Ag(MTZ)2NO3] and [Ag(MTZ)2]2SO4, they were exposed to daylight and UV-A rays and were visually assessed. Their cytotoxicity toward human cancer cells (HepG2, Caco-2) and mice normal fibroblasts (Balb/c 3T3 clone A31) was determined by MTT, NRU, TPC and LDH assays. The micro-dilution broth method was used to evaluate their antimicrobial properties against Gram-positive and Gram-negative bacteria. A biofilm eradication study was also performed using the crystal violet method and confocal laser scanning microscopy. The photo-stability of the complexes was higher than silver(I) salts. In human cancer cells, [Ag(MTZ)2]2SO4 was more cytotoxic than Ag2SO4 and, in turn, AgNO3 was more cytotoxic than [Ag(MTZ)2NO3]. For Balb/c 3T3 cells, Ag2SO4 was more cytotoxic than [Ag(MTZ)2]2SO4, while the cytotoxicity of AgNO3 and [Ag(MTZ)2NO3] was similar. Metronidazole in the tested concentration range was non-cytotoxic for both normal and cancer cells. The complexes showed increased bioactivity against aerobic and facultative anaerobic bacteria when compared to metronidazole. For the majority of the tested bacterial strains, the silver(I) salts and complexes showed a higher antibacterial activity than MTZ; however, some bacterial strains presented the reverse effect. Our results showed that silver(I) complexes present higher photo-stability, cytotoxicity and antimicrobial activity in comparison to MTZ and, to a certain extent, to silver(I) salts.

Morphology and energy transfer study between conjugated polymers thin films: experimental and theoretical approaches.

In this paper, the effect of a silafluorene derivative copolymer, the poly[2,7-(9,9-dioctyl-dibenzosilole)-alt-4,7-bis(thiophene-2-yl)benzo-2,1,3-thiadiazole] (PSiF-DBT) sensitized by a simpler homopolymer, the poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) were investigated in a bilayer and ternary blend configuration. The energy transfer between the polymers prior to electron transfer to the acceptors can be an efficient alternative to photocurrent improvement in photovoltaic devices. The interactions between the two donor polymer films were evaluated optically and morphologically with several experimental techniques and correlated to the photovoltaic performance. Improved photon to charge conversion was observed in the blend films at different device geometries-considering bilayer devices with fullerene and inverted flexible devices blade coated in air conditions with a non-fullerene small molecule acceptor. Resonant Auger spectroscopy using the core-hole clock method was employed to evaluate the ultrafast charge delocalization times of conjugated polymers in the low-femtosecond regime. Density functional theory and time-dependent DFT methods were used to help understand some experimental observations. The results show that the homopolymer can improve the absorption spectra and the nonradiative-energy transfer from MDMO-PPV to PSiF-DBT and act as a photosensitizer in the copolymer units. In addition, the PSiF-DBT blended with MDMO-PPV exhibits a more organized structure than the neat material resulting in better absorption stability of films kept under continuous illumination.

The formation of phycocyanin-EGCG complex for improving the color protection stability exposing to light.

Phycocyanin (PC) is a natural pigment-protein complex in food dye applications. In this study, a phycocyanin-epigallocatechin gallate (EGCG) complex (PE) was prepared and the effects of EGCG on the structure and color stability of PC were evaluated. The fluorescence results showed that the binding number n was 62.1 ± 3.41 (EGCG/PC) and the binding constant K was 4.39 (±0.2) × 105 M-1, indicating a weak-binding interaction. Fourier transform-infrared analysis showed that EGCG caused structural changes in PC by partially uncoiling α-helix and increasing ß-sheet content. The EGCG induced a PC association at a reaction molar ratio above 40:1 (EGCG/PC). Moreover, EGCG protected phycocyanobilin against color fading, making PE more stable relative to PC under 8-days storage in light. This study provides a novel scheme to stabilize PC by forming a complex with polyphenols, which will facilitate the PC application as a natural blue pigment in food.

Light-Stable Methylammonium-Free Inverted Flexible Perovskite Solar Modules on PET Exceeding 10.5% on a 15.7 cm2 Active Area.

Perovskite solar modules (PSMs) have been attracting the photovoltaic market, owing to low manufacturing costs and process versatility. The employment of flexible substrates gives the chance to explore new applications and further increase the fabrication throughput. However, the present state-of-the-art of flexible perovskite solar modules (FPSMs) does not show any data on light-soaking stability, revealing that the scientific community is still far from the potential marketing of the product. During this work, we demonstrate, for the first time, an outstanding light stability of FPSMs over 1000 h considering the recovering time (T80 = 730 h), exhibiting a power conversion efficiency (PCE) of 10.51% over a 15.7 cm2 active area obtained with scalable processes by exploiting blade deposition of a transporting layer and a stable double-cation perovskite (cesium and formamidinium, CsFA) absorber.

Polysaccharides-Based Complex Particles' Protective Role on the Stability and Bioactivity of Immobilized Curcumin.

The curcumin degradation represents a significant limitation for its applications. The stability of free curcumin (FC) and immobilized curcumin in complex particles (ComPs) based on different polysaccharides was studied under the action of several factors. Ultraviolet-visible (UV-VIS) and Fourier-transform infrared (FTIR) spectroscopy proved the FC photodegradation and its role as a metal chelator: 82% of FC and between 26% and 39.79% of curcumin within the ComPs degraded after exposure for 28 days to natural light. The degradation half-life (t1/2) decreases for FC when the pH increases, from 6.8 h at pH = 3 to 2.1 h at pH = 9. For curcumin extracted from ComPs, t1/2 was constant (between 10 and 13 h) and depended on the sample's composition. The total phenol (TPC) and total flavonoids (TFC) content values increased by 16% and 13%, respectively, for FC exposed to ultraviolet light at λ = 365 nm (UVA), whereas no significant change was observed for immobilized curcumin. Antioxidant activity expressed by IC50 (µmoles/mL) for FC exposed to UVA decreased by 29%, but curcumin within ComPs was not affected by the UVA. The bovine serum albumin (BSA) adsorption efficiency on the ComPs surface depends on the pH value and the cross-linking degree. ComPs have a protective role for the immobilized curcumin.

Effect of temperature of preheated soy protein isolate on the structure and properties of soy protein isolate heated-vitamin D3 complex.

In this paper, soy protein isolate (SPI) was preheated and combined with vitamin D3 (VD3 ) to study the protective effect of modified SPI on VD3 . The structure and properties of the SPI with heat treatment-VD3 (SPI(H)-VD3 ) complex were determined. The secondary and tertiary structure of SPI(H)-VD3 results showed that the content of α-helix decreased and the content of random coil increased, indicating that the rigid structure of the protein decreased, the flexibility increased, and the maximum fluorescence intensity wavelength was red shifted. When the heat treatment temperature was 85°C, the embedding rate of SPI(H)-VD3 composite was the highest. As the heat treatment temperature increased, the internal hydrophobic groups of SPI were exposed, and the average particle size decreased significantly. The light stability results showed that the content of VD3 in the SPI(H)-VD3 composite at a heat treatment temperature of 85°C was significantly increased compared with the unheated SPI. PRACTICAL APPLICATIONS: This article mainly discusses the structure and properties of modified soy protein isolates bound to VD3 by preheating soy protein isolates at different temperatures. It provides more possibilities for the application of VD3 in food.

Natural rosin modified carboxymethyl cellulose delivery system with lowered toxicity for long-term pest control.

The increasing world-wide demand for food has prompted the development of efficient and environmentally friendly pesticide formulations. In this article, we have prepared CMC-g-PRSG carrier based on two compounds from natural materials carboxymethyl cellulose (CMC) and rosin (RS). The model pesticide avermectin (AVM) was encapsulated through hydrophobic interaction, and self-assembled to form nanopesticide AVM@CMC-g-PRSG with an average particle size of 167 nm. The prepared nanopesticide displays enhanced dispersibility and stability of AVM in water, and can effectively adhere to the leaves to prevent loss. The release rate of AVM encapsulated in the nanocarrier can be controlled by adjusting pH, and AVM half-life under ultraviolet radiation shows a 3-fold increase allowing control of pests for prolonged periods of time in practical applications. Biological safety tests showed that AVM@CMC-g-PRSG effectively reduces the toxicity of AVM to aquatic animals. Therefore, the cheap and degradable carrier CMC-g-PRSG can improve the effect of hydrophobic pesticides.

Thermal and light stability of anthocyanins from strawberry by-products non-encapsulated and encapsulated with inulin.

BACKGROUND: Strawberry by-products were explored as sources of anthocyanins for the extraction of natural colorants in the development of new value-added products for the food industry. For this purpose, the stability of strawberry anthocyanin extracts was evaluated for color and total anthocyanin content. The anthocyanins were encapsulated with inulin to protect them from processing at high temperatures and exposure to light. Microcapsules were obtained by two drying processes (spray and freeze drying) in order to study their use as coloring ingredients for their use in the food industry. METHODS: Thermal (using the response surface methodology - RSM) and light stability tests were performed, simulating long-term processing and food storage. Antioxidant activity, total anthocyanin content and color analysis were quantified using several methods, and the microcapsules were characterized using scanning electron microscopy. Anthocyanins and their derivatives were identified by high resolution mass spectrometry. RESULTS: The strawberry extracts showed high antioxidant capacity and total anthocyanin content. The RSM of the thermal stability test showed that temperature is the variable with the most significant effect on color stability and total anthocyanin content. The anthocyanins showed more stability at 50°C/60 min, 57°C/102 min, 93°C/18 min and with up to 8 days of light. Microencapsulation of the strawberry extracts with inulin obtained by spray and freeze drying improved the stability of anthocyanins. The spray drying process can offer better applications for the food industry due to the more regular shape of the microcapsules, which supports the potential use of strawberry by-products as coloring ingredients for application in the food industry. CONCLUSIONS: This study can serve as a technical reference for the development of anthocyanin microcapsules with inulin from strawberry by-products obtained by spray drying, resulting in stable natural colorants to be used as ingredients in the food industry.

A temperature-responsive release cellulose-based microcapsule loaded with chlorpyrifos for sustainable pest control.

Controlled pesticide release in response to environmental stimuli by encapsulating pesticide in carrier is a feasible approach to improve the effective utilization rate. Here, a temperature-responsive release microcapsule loaded with chlorpyrifos (CPF@CM) was prepared from n-hexadecane-in-water emulsions via interfacial polymerization. The microcapsule was consisted of nanofibrillated cellulose (NFC) as the shell wall material and isophorone diisocyanate (IPDI) as the crosslinker. The prepared CPF@CM had pesticide-loading efficiency (33.1 wt%) and favorable adhesion on the surface of cucumber and peanut foliage compared with conventional formulation. Additionally, CPF@CM could protect chlorpyrifos against photodegradation effectively. The in vitro release test showed that microcapsule had adjustable controlled-release characteristics with the change in temperature based on phase transition of the n-hexadecane core. Bioassay studies showed that control efficacy of CPF@CM microcapsule against P. xylostella was positively correlated with temperature because of temperature-induced changes in release rate. The acute toxicity of CPF@CM to zebrafish was reduced more than 5-fold compared with that of CPF technical. These results indicated that the microcapsule release system has great potential in the development of an effective and environmentally friendly pesticide formulation.

Development of LC-MS/MS method and application to bioequivalence study of a light sensitive drug montelukast.

OBJECTIVE: The aim of the study was to develop a simple, highthroughput and sensitive LC-MS/MS method and apply to a bioequivalence study of montelukast, a light sensitive drug. METHOD: The effects of organic modifiers in mobile phase, protein precipitation agent to plasma sample ratio, and light on montelukast stability in unprocessed and processed human plasma, were evaluated. Validation was conducted in accordance with European Medicines Agency Guideline on bioanalytical method validation. RESULTS: No interference peak was observed when acetonitrile was used as an organic modifier. Acetonitrile to plasma ratio of 4:1 produced clean plasma sample. Approximately 3 % of cis isomer was detected in unprocessed plasma samples while 21 % of cis isomer was detected in processed plasma samples after exposing to fluorescent light for 24h. The standard calibration curve was linear over 3.00-1200.00 ng/mL. All method validation parameters were within the acceptance criteria. CONCLUSION: The validated method was successfully applied to a bioequivalence study of two montelukast formulations involving 24 healthy Malaysian volunteers. The light stability of a light sensitive drug in unprocessed and processed human plasma samples should be studied prior to pharmacokinetic/bioequivalence studies. Measures could then be taken to protect the analyte in human plasma from light degradation.

To Maintain Formulation Composition Similarity of Coated Tablets of Different Strengths: Should Coating be Based on Core Tablet Weight or Surface Area?

PURPOSE: As per the Japanese or SUPAC guidance to maintain formulation composition similarity across tablet strengths, the coating should be applied based on the core tablet surface area or weight, respectively. These two coating approaches were compared by evaluating protective effects of coating on the light stability of three model compounds. METHODS: Core tablets of three light sensitive drugs, nifedipine, rosuvastatin calcium, and montelukast sodium were coated either with PVA-based Opadry® II white or Opadry® II beige. The coated tablets were exposed to light up to three ICH cycles. RESULTS: For Opadry® II white, the surface area based coating provided consistent light protection across tablet strengths when the coating amount was more than 0.1 mg/mm2 compared to that based on core tablet weights. For Opadry® II beige, both approaches gave comparable and better light protection due to presence of iron oxides. The light protection by Opadry® II white could be because of physical barrier of coating, which was uniform across the strengths when it was based on core tablet surface area. CONCLUSION: For a routine tablet formulation development with Opadry color coating, it does not matter whether the coating is applied based on the core tablet surface area or weight.