Lithium inelastic cross-sections and their impact on micro and nano dosimetry of boron neutron capture.

Objective.To present a new set of lithium-ion cross-sections for (i) ionization and excitation processes down to 700 eV, and (ii) charge-exchange processes down to 1 keV u-1. To evaluate the impact of the use of these cross-sections on micro a nano dosimetric quantities in the context of boron neutron capture (BNC) applications/techniques.Approach.The Classical Trajectory Monte Carlo method was used to calculate Li ion charge-exchange cross sections in the energy range of 1 keV u-1to 10 MeV u-1. Partial Li ion charge states ionization and excitation cross-sections were calculated using a detailed charge screening factor. The cross-sections were implemented in Geant4-DNA v10.07 and simulations and verified using TOPAS-nBio by calculating stopping power and continuous slowing down approximation (CSDA) range against data from ICRU and SRIM. Further microdosimetric and nanodosimetric calculations were performed to quantify differences against other simulation approaches for low energy Li ions. These calculations were: lineal energy spectra (yf(y) andyd(y)), frequency mean lineal energyyF-, dose mean lineal energyyD-and ionization cluster size distribution analysis. Microdosimetric calculations were compared against a previous MC study that neglected charge-exchange and excitation processes. Nanodosimetric results were compared against pure ionization scaled cross-sections calculations.Main results.Calculated stopping power differences between ICRU and Geant4-DNA decreased from 33.78% to 6.9%. The CSDA range difference decreased from 621% to 34% when compared against SRIM calculations. Geant4-DNA/TOPAS calculated dose mean lineal energy differed by 128% from the previous Monte Carlo. Ionization cluster size frequency distributions for Li ions differed by 76%-344.11% for 21 keV and 2 MeV respectively. With a decrease in theN1within 9% at 10 keV and agreeing after the 100 keV. With the new set of cross-sections being able to better simulate low energy behaviors of Li ions.Significance.This work shows an increase in detail gained from the use of a more complete set of low energy cross-sections which include charge exchange processes. Significant differences to previous simulation results were found at the microdosimetric and nanodosimetric scales that suggest that Li ions cause less ionizations per path length traveled but with more energy deposits. Microdosimetry results suggest that the BNC's contribution to cellular death may be mainly due to alpha particle production when boron-based drugs are distributed in the cellular membrane and beyond and by Li when it is at the cell cytoplasm regions.

PVA-assisted spray deposited porous Li4Ti5O12 thin film as high-rate and long-cycle anode for lithium-ion thin-film batteries.

Spinel Li4Ti5O12 (LTO), a zero-strain material, is a promising anode material for solid-state thin-film lithium-ion batteries (TFB). However, the preparation of high-performance Li4Ti5O12 thin-film electrodes through facile methods remains a significant challenge. Herein, we present a novel approach to prepare a binder- and conductor-free porous Li4Ti5O12 (P-LTO) thin-film. This approach polyvinyl alcohol (PVA)-assisted spray deposition and does not require the use of complex or expensive methods. Adding PVA to the precursor solution effectively prevents thin-film cracking during high-temperature annealing, enhances adhesion, and forms a highly interconnected porous structure. This unique structure shortens the lithium-ion diffusion pathways and facilitates electron transport. Therefore, P-LTO thin film electrodes demonstrate exceptional rate capacity of 104.1 mAh/g at a current density of 100C. In addition, the electrodes exhibit ultra-long cycle stability, retaining 80.9 % capacity after 10,000 cycles at 10C. This work offers a novel approach for the preparation of high-performance thin-film electrodes for TFBs.

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes.

Lithium metal is highly favored as an ideal anode material in future high-capacity lithium batteries due to its appealing properties. Nevertheless, the implementation of lithium metal batteries (LMBs) is severely plagued by challenges such as instable solid electrolyte interface (SEI), uncontrolled growth of dendrite, and severe volume expansion. Herein, to address the aforementioned issues, an artificial SEI layer is fabricated, which is comprised of LixSi alloy and Li3N. The in-situ generated LixSi/Li3N interface is formed on the carbon fiber (denoted as CF/LixSi/Li3N) through a spontaneous reaction between molten Li and Si3N4. Density functional theory (DFT) calculations reveal that LixSi alloy has low ion diffusion energy barrier, which facilitates the low nucleation overpotential of Li+ and enables homogeneous lithium deposition. Li3N can further promote the rapid Li+ transport due to the excellent Li+ conductivity. In addition, the reserved 3D space effectively mitigates the volume change along cycling procedure. Owing to the synergistic effect of the LixSi/Li3N protective layer and the 3D structure, the composite anode shows higher cycling stability with a lifetime of more than 3000 cycles at 1 mA cm-2. Furthermore, matched with commercial LiFePO4 (LFP) and LiNi5Co2Mn3O2 (NCM523) cathodes, the full cells also exhibit impressive electrochemical properties. This work introduces an ingenious approach for constructing stable lithium metal anodes and effective lithium metal batteries.

Cleaner separation and recovery of valuable metals from spent ternary cathode via carbon dioxide synergetic thermite reduction strategy.

The low-carbon recycling of spent lithium-ion batteries has become crucial due to the increasing need to address resource shortages and environmental concerns. Herein, a low-carbon, facile, and efficient method was developed to separate and recover Li, Al, and transition metals from spent ternary cathodes. Initially, the cathode materials post-discharge and disassembly do not require pre-sorting. Instead of using carbonaceous materials, the Al foil in the cathode serves as the reducing agent during reduction roasting. The impact of different roasting atmospheres (air, N2, CO2) on phase transitions and the extraction of valuable metals was examined. The findings revealed that after synergistic thermite reduction in a carbon dioxide atmosphere, the cathode material is completely dissociated. Li is selectively converted to Li2CO3 rather than LiAlO2, and the reduced reactivity of the Al foil encourages the formation of lower-valence oxides of Ni and Co, rather than their metallic forms. Under optimal roasting conditions at 650 °C for 1.0 h, 91.4% of Li can be preferentially and selectively extracted through carbonation water leaching, with less than 0.1% of Al and transition metals dissolving. Subsequently, ∼98% of Al and ∼99% of Ni, Co, and Mn can be leached using alkaline and acidic solutions, respectively. Compared to the traditional carbon thermal reduction process, this process offers several advantages including the elimination of pre-sorting and additional reducing agents, lower carbon emissions, and higher recovery rates of valuable metals. Thus, this process makes the recovery of metals from spent lithium-ion batteries more environmentally sustainable, simple, cost-effective, and adaptable.

Regulating Anode-electrolyte Interphasial Reactions by Zwitterionic Binder Chemistry in Lithium-ion Batteries with High-nickel Layered Oxide Cathodes and Silicon-Graphite Anodes.

The practical application of silicon (Si)-based anodes faces challenges due to severe structural and interphasial degradations. These challenges are exacerbated in lithium-ion batteries (LIBs) employing Si-based anodes with high-nickel layered oxide cathodes, as significant transition-metal crossover catalyzes serious parasitic side reactions, leading to faster cell failure. While enhancing the mechanical properties of polymer binders has been acknowledged as an effective means of improving solid-electrolyte interphase (SEI) stability on Si-based anodes, an in-depth understanding of how the binder chemistry influences the SEI is lacking. Herein, a zwitterionic binder with an ability to manipulate the chemical composition and spatial distribution of the SEI layer is designed for Si-based anodes. It is evidenced that the electrically charged microenvironment created by the zwitterionic species alters the solvation environment on the Si-based anode, featuring rich anions and weakened Li+-solvent interactions. Such a binder-regulated solvation environment induces a thin, uniform, robust SEI on Si-based anodes, which is found to be the key to withstanding transition-metal deposition and minimizing their detrimental impact on catalyzing electrolyte decomposition and devitalizing bulk Si. As a result, albeit possessing comparable mechanical properties to those of commercial binders, the zwitterionic binder enables superior cycling performances in high-energy-density LIBs under demanding operating conditions.

In Situ Polymerized Zwitterionic Copolymer Ionic Gel Electrolytes with High Performance for Lithium-Ion Batteries.

Gel electrolytes are a promising research direction due to their high safety. However, its poor room temperature conductivity along with complex preparation process hinder its practical application. In this article, a type of zwitterionic gel electrolyte is prepared by in situ polymerization. The introduction of charged but nonmigrating zwitterionic copolymer in the polymer chain is beneficial to the dissociation of the lithium salt, improving the ion transport of the electrolyte on this account. At room temperature, the conductivity of lithium ion reaches 9.1 × 10-4 S cm-1, which contributes to achieve excellent electrochemical performance at high rates. The assembled Li|LiFePO4 cell also shows a capacity retention rate of 90.5% after 150 cycles at 0.5 C at room temperature as well as remarkable cycle stability at 1 C. These offer a novel tactic for the efficient and safe commercial application of lithium-ion batteries.

Design of High-Performance Formyl-Functionalized COF Aerogels as Quasi-Solid Lithium Battery Electrolyte by a Solvent Substitution Strategy.

Covalent organic framework (COF) aerogels with functional groups offer exceptional processability and functionality for various applications. These hierarchical porous materials combine the advantages of COFs with the benefits of aerogels, overcoming the limitations of conventional insoluble and nonfusible COF powders. However, achieving both high crystallinity and shape retention remains a challenge for functionalized COF aerogels. In this work, we develop a novel and general solvent substitution method for the one-step synthesis of formyl-functionalized COF aerogels without harsh vacuum conditions. These aerogels exhibit excellent processing capabilities, superior mechanical strength, and enhanced functionality. As a proof-of-concept, they were used in adsorption and lithium metal battery applications, significantly maximizing the structural advantages of COFs, e.g.: (i) the hierarchical porous structure is fully wetted by the electrolyte to form continuous transport channels; (ii) the polar groups, which are easier to be acquired, help in desolvation and transfer of Li+; (iii) the regular pore structures stabilize deposition of Li+ and inhibit the growth of lithium dendrites. These combined benefits contribute to a lighter battery with improved energy density and enhanced safety.

Lithiophilic Multichannel Layer to Simultaneously Control the Li-Ion Flux and Li Nucleation for Stable Lithium Metal Batteries.

Although the Li metal has been gaining attention as a promising anode material for the next-generation high-energy-density rechargeable batteries owing to its high theoretical specific capacity (3860 mAh g-1), its practical use remains challenging owing to inherent issues related to Li nucleation and growth. This paper reports the fabrication of a lithiophilic multichannel layer (LML) that enables the simultaneous control of Li nucleation and growth in Li-metal batteries. The LML, composed of lithiophilic ceramic composite nanoparticles (Ag-plated Al2O3 particles), is fabricated using the electroless plating method. This LML provides numerous channels for a uniform Li-ion diffusion on a nonwoven separator. Furthermore, the lithiophilic Ag on the Li metal anode surface facing the LML induces a low overpotential during Li nucleation, resulting in a dense Li deposition. The LML enables the LiNi0.8Co0.1Mn0.1O2|| Li cells to maintain a capacity higher than 75% after 100 cycles, even at high charge/discharge rates of 5.0 C at a cutoff voltage of 4.4 V, and achieve an ultrahigh energy density of 1164 Wh kg-1. These results demonstrate that the LML is a promising solution enabling the application of Li metal as an anode material in the next-generation Li-ion batteries.

Polyacrylonitrile Based Triblock Copolymer Binder Enabling Excellent Performance toward LiNi0.5Mn1.5O4 and Sulfur Based Batteries.

There is an urgent need for lithium-ion batteries with high energy density to meet the increasing demand for advanced devices and ecofriendly electric vehicles. Spinel LiNi0.5Mn1.5O4 (LNMO) is the most promising cathode material for achieving high energy density due to its high operating voltage (4.75 V vs Li/Li+) and impressive capacity of 147 mAh g-1. However, the binders conventionally used are prone to high potential and oxidation at the cathode side, resulting in a loss of the ability to bond active material and conductive agent integrity. This can lead to severe capacity fading and irreversible battery failure. This study demonstrates that incorporating acrylic anhydride and methyl methacrylate into conventional acrylonitrile through solution polymerization improves the binding energy and voltage resistance. The results indicate that the triblock poly(acrylonitrile-methyl methacrylate-acrylic anhydride) (PAMA) binder has a much higher peeling strength (0.506 N cm-1) compared to its polyvinylidene fluoride (PVDF) counterpart (0.3 N cm-1), making it a more feasible strategy. When assembled with LiNi0.5Mn1.5O4, the PAMA based electrode maintains a capacity retention of 70.7% after 800 cycles at 0.1 C, which is significantly higher than the 33.9% retention of the PVDFbased electrode. This is due to the large number of polar groups, including ─C≡N and ─C═O, on PAMA, which are conducive to adsorbing lithium polysulfide. The S@PAMA electrode is tested and maintained a capacity value of 628.7 mAh g-1 after long-term cycling, confirming its ability to effectively suppress the shuttle effect.

A dataset of over one thousand computed tomography scans of battery cells.

Battery technology is increasingly important for global electrification efforts. However, batteries are highly sensitive to small manufacturing variations that can induce reliability or safety issues. An important technology for battery quality control is computed tomography (CT) scanning, which is widely used for non-destructive 3D inspection across a variety of clinical and industrial applications. Historically, however, the utility of CT scanning for high-volume manufacturing has been limited by its low throughput as well as the difficulty of handling its large file sizes. In this work, we present a dataset of over one thousand CT scans of as-produced commercially available batteries. The dataset spans various chemistries (lithium-ion and sodium-ion) as well as various battery form factors (cylindrical, pouch, and prismatic). We evaluate seven different battery types in total. The manufacturing variability and the presence of battery defects can be observed via this dataset. This dataset may be of interest to scientists and engineers working on battery technology, computer vision, or both.

[Compressive stress in three types of finishing lines with lithium disilicate crowns in permanent teeth: finite element analysis]. / Tensión compresiva en tres tipos de líneas de terminación con coronas de disilicato de litio en dientes permanentes: análisis de elemento finito.

Introduction: In oral rehabilitation, the use of ceramic restorations is widely accepted due to its aesthetic capacity to mimic the naturalness of the dental tissue, provide longevity of the material, and present a greater marginal fit compared to crowns with a metal structure. Termination lines are biological preparations whose function is to minimize the cervical opening of the marginal seal. Consequently, analyzing the behavior of restorative materials under compressive forces decreases the risk of fracture and increases the success of the treatment. Objective: To compare the compressive stresses of lithium disilicate crowns with three different finishing lines. Methodology: In silico study of the simulation of a dental preparation on a lower right first molar with chamfer (0.6 mm), shoulder (0.5 mm) and deep chamfer (0.5 mm) finish lines. Using the SolidWorks®ï¸ version 2017 software, the maximum stresses, minimum stresses, and location of the compressive force were collected on the Megapascal (Mpa) measurement scale. Results: The chamfer type termination line (0.6mm) obtained a lower compressive stress compared to the other two shoulder type termination lines (0.5mm) and deep chamfer (0.5mm). Conclusions: It was shown that the chamfer type finishing line (0.6mm) presented a better force distribution, determining greater reliability in the selection of this finishing line with the use of a lithium disilicate crown in a unitary manner.

Lithium carbonate-induced giant goiter and subclinical hyperthyroidism in a patient with schizophrenia: A case report and review of literature.

BACKGROUND: Lithium carbonate is used to manage various mood disorders, but it can cause thyroid abnormalities, including goiter, hypothyroidism, and hyperthyroidism. In rare cases, it can lead to giant goiter and subclinical hyperthyroidism, which may require surgical intervention in severe cases. CASE SUMMARY: This case represents a rare development of giant goiter and subclinical hyperthyroidism in a schizophrenia patient who was subjected to prolonged lithium carbonate treatment. The enlarged thyroid gland caused pressure on the airway and recurrent laryngeal nerve, which led to respiratory distress, hoarseness, and dysphagia. The immediate danger of suffocation required urgent surgical intervention. In this report, we describe the case of a 41-year-old Chinese woman. This sheds light on the etiology and challenges associated with managing a giant goiter. The patient underwent a subtotal thyroidectomy to relieve airway compression and facilitate airway expansion. Prior to the procedure, the patient was given iodine to prepare. Concurrently, changes were made to the psychiatric medication regimen. Following surgery, the patient's respiratory function and vocal cord functionality improved significantly, and her mental state remained stable. CONCLUSION: It is essential to monitor thyroid function, test thyroid antibody levels, and perform thyroid ultrasounds consistently in all patients undergoing long-term lithium carbonate treatment. This vigilance helps prevent severe and potentially life-threatening thyroid enlargement.

Highly tough slide-crosslinked gel polymer electrolyte for stable lithium metal batteries.

Gel polymer electrolytes (GPEs) hold great promise for the practical application of lithium metal batteries. However, conventional GPEs hardly resists lithium dendrites growth and maintains long-term cycling stability of the battery due to its poor mechanical performance. Inspired by the slide-ring structure of polyrotaxanes (PRs), herein we developed a dynamic slide-crosslinked gel polymer electrolyte (SCGPE) with extraordinary stretchability of 970.93% and mechanical strength of 1.15 MPa, which is helpful to buffer the volume change of electrodes and maintain mechanical integrity of the battery structure during cycling. Notably, the PRs structures can provide fast ion transport channels to obtain high ionic conductivity of 1.73×10-3 S cm-1 at 30°C. Additionally, the strong polar groups in SCGPE restrict the free movement of anions to achieve high lithium-ion transference number of 0.71, which is favorable to enhance Li+ transport dynamics and induce uniform Li+ deposition. Benefiting from these features, the constructed Li|SCGPE-3|LFP cells exhibit ultra-long and stable cycle life over 1000 cycles and high-capacity retention (89.6% after 1000 cycles). Even at a high rate of 16C, the cells deliver a high capacity of 79.2 mAh g-1. The slide-crosslinking strategy in this work provides a new perspective on the design of advanced GPEs for LMBs.

Adjusting Ion Diffusion Kinetics of Li Deposition Enabled by an Elastic Porous Melamine Sponge Host for Stable Lithium Metal Anodes.

Lithium (Li) dendritic growth and huge volume expansion seriously hamper Li-metal anode development. Herein, we design a lightweight 3D Li-ion-affinity host enabled by silver (Ag) nanoparticles fully decorating a porous melamine sponge (Ag@PMS) for dendrite-free and high-areal-capacity Li anodes. The compact Ag nanoparticles provide abundant preferred nucleation sites and give the host strong conductivity. Moreover, the high specific surface area and polar groups of the elastic, porous melamine sponge enhance the Li-ion diffusion kinetics, prompting homogeneity of Li deposition and stripping. As expected, the integrated 3D Ag@PMS-Li anode delivered a remarkable electrochemical performance, with a Coulombic efficiency (CE) of 97.14% after 450 cycles at 1 mA cm-2. The symmetric cell showed an ultralong lifespan of 3400 h at 1 mA cm-2 for 1 mAh cm-2. This study provides a facile and cost-effective strategy to design an advanced 3D framework for the preparation of a stable dendrite-free Li metal anode.

Hypervalent iodine-catalyzed amide and alkene coupling enabled by lithium salt activation.

Hypervalent iodine catalysis has been widely utilized in olefin functionalization reactions. Intermolecularly, the regioselective addition of two distinct nucleophiles across the olefin is a challenging process in hypervalent iodine catalysis. We introduce here a unique strategy using simple lithium salts for hypervalent iodine catalyst activation. The activated hypervalent iodine catalyst allows the intermolecular coupling of soft nucleophiles such as amides onto electronically activated olefins with high regioselectivity.

Ecotoxicological assessment, oxidative response, and enzyme activity disorder of the rotifer Brachionus asplanchnoidis exposed to a toxic cocktail of spent lithium-ion battery leachate.

Spent lithium-ion batteries (LIBs) have emerged as a major source of waste due to their low recovery rate. The physical disposal of spent LIBs can lead to the leaching of their contents into the surrounding environment. While it is widely agreed that hazardous substances such as nickel and cobalt in the leachate can pose a threat to the environment and human health, the overall composition and toxicity of LIB leachate remain unclear. In this study, a chemical analysis of leachate from spent LIBs was conducted to identify its primary constituents. The ecotoxicological parameters of the model organism, rotifer Brachionus asplanchnoidis, were assessed to elucidate the toxicity of the LIB leachate. Subsequent experiments elucidated the impacts of the LIB leachate and its representative components on the malondialdehyde (MDA) level, antioxidant capacity, and enzyme activity of B. asplanchnoidis. The results indicate that both the LIB leachate and its components are harmful to individual rotifers due to the adverse effects of stress-induced disturbances in biochemical indicators, posing a threat to population development. The intensified poisoning phenomenon under combined stress suggests the presence of complex synergistic effects among the components of LIB leachate. Due to the likely environmental and biological hazards, LIBs should be strictly managed after disposal. Additionally, more economical and eco-friendly recycling and treatment technologies need to be developed and commercialized.

A multifunctional solution to enhance capacity and stability in lithium-sulfur batteries: Incorporating hollow CeO2 nanorods into carbonized non-woven fabric as an interlayer.

Lithium-sulfur batteries (LSBs) hold promise as the next-generation lithium-ion batteries (LIBs) due to their ultra-high theoretical capacity and remarkable cost-efficiency. However, these batteries suffer from the serious shuttle effect, challenging their practical application. To address this challenge, we have developed a unique interlayer (HCON@CNWF) composed of hollow cerium oxide nanorods (CeO2) anchored to carbonized non-woven viscose fabric (CNWF), utilizing a straightforward template method. The prepared interlayer features a three-dimensional (3D) conductive network that serves as a protective barrier and enhances electron/ion transport. Additionally, the CeO2 component effectively chemisorbs and catalytically transforms lithium polysulfides (LiPSs), offering robust chemisorption and activation sites. Moreover, the unique porous structure of the HCON@CNWF not only physically adsorbs LiPSs but also provides ample space for sulfur's volume expansion, thus mitigating the shuttle effect and safeguarding the electrode against damage. These advantages collectively contribute to the battery's outstanding electrochemical performance, notably in retaining a reversible capacity of 80.82 % (792 ± 5.60 mAh g-1) of the initial value after 200 charge/discharge cycles at 0.5C. In addition, the battery with HCON@CNWF interlayer has excellent electrochemical performance at high sulfur loading (4 mg cm-2) and low liquid/sulfur ratio (7.5 µL mg-1). This study, thus, offers a novel approach to designing advanced interlayers that can enhance the performance of LSBs.

Topological Transformation of Hydrogen-Terminated Germanium to Germanium Nanosheets for Fast Lithium Storage.

Germanium has been recognized as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity and excellent lithium-ion diffusivity. Nonetheless, it is challenging to enhance both the high-rate performance and long-term cycling stability simultaneously. This study introduces a novel heterostructure composed of germanium nanosheets integrated with graphene (Ge NSs@Gr). These nanosheets undergo an in situ phase transformation from a hydrogen-terminated multilayer germanium compound termed germanane (GeH) derived via topochemical deintercalation from CaGe2. This approach mitigates oxidation and prevents restacking by functionalizing the exfoliated germanane with octadecenoic organic molecules. The resultant germanium nanosheets retain their structural integrity from CaGe2 and present an exposed, active (111) surface that features an open crystal lattice, facilitating swift lithium-ion migration conducive to lithium storage. The composite material delivers a substantial reversible capacity of 1220 mA h g-1 at a current density of 0.2 C and maintains a capacity of 456 mA h g-1 even at an ultrahigh current density of 10 C over extended cycling. Impressively, a capacity of 316 mA h g-1 remains after 5000 cycles. The exceptional high-rate performance and durable cycling stability underscore the Ge NSs@Gr anode's potential as a highly viable option for LIBs.

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor.

The foreseeable global cobalt (Co) crisis has driven the demand for cathode materials with less Co dependence, where high-nickel layered oxides are a promising solution due to their high energy density and low cost. However, these materials suffer from poor cycling stability and rapid voltage decay due to lattice displacement and nanostrain accumulation. Here, we introduced an exothermic TiN dopant via a scalable coating method to stabilize LiNi0.917Co0.056Mn0.026O2 (NCM92) materials. The exothermic reaction of TiN conversion generates extra heat during the calcination process on the cathode surface, promotes the lithiation process, and tunes the morphology of the cathode material, resulting in compact and conformal smaller particle sizes to provide better particle integration and lithium diffusion coefficient. Moreover, the Ti dopant substitutes the Ni3+ site to generate stronger Ti-O bonding, leading to higher structural stability and extended cycle life. The Ti-doped NCM (NCM92_TiN) shows a remarkable cycling stability of maintaining 80% capacity retention for 400 cycles, while bare NCM92 can only reach 88 cycles. Furthermore, the NCM92_TiN cathodes demonstrate an enhanced rate capability and achieve a discharge capacity of over 168 mAh g-1 at 5C.

Modulating porous silicon-carbon anode stability: Carbon/silicon carbide semipermeable layer mitigates silicon-fluorine reaction and enhances lithium-ion transport.

Silicon-based material is regarded as one of the most promising anodes for next-generation high-performance lithium-ion batteries (LIBs) due to its high theoretical capacity and low cost. Harnessing silicon carbide's robustness, we designed a novel porous silicon with a sandwich structure of carbon/silicon carbide/Ag-modified porous silicon (Ag-PSi@SiC@C). Different from the conventional SiC interface characterized by a frail connection, a robust dual covalent bond configuration, dependent on SiC and SiOC, has been successfully established. Moreover, the innovative sandwich structure effectively reduces detrimental side reactions on the surface, eases volume expansion, and bolsters the structural integrity of the silicon anode. The incorporation of silver nanoparticles contributes to an improvement in overall electron transport capacity and enhances the kinetics of the overall reaction. Consequently, the Ag-PSi@SiC@C electrode, benefiting from the aforementioned advantages, demonstrates a notably elevated lithium-ion mobility (2.4 * 10-9 cm2·s-1), surpassing that of silicon (5.1 * 10-12 cm2·s-1). The half-cell featuring Ag-PSi@SiC@C as the anode demonstrated robust rate cycling stability at 2.0 A/g, maintaining a capacity of 1321.7 mAh/g, and after 200 cycles, it retained 962.6 mAh/g. Additionally, the full-cell, featuring an Ag-PSi@SiC@C anode and a LiFePO4 (LFP) cathode, exhibits outstanding longevity. Hence, the proposed approach has the potential to unearth novel avenues for the extended exploration of high-performance silicon-carbon anodes for LIBs.