ABSTRACT
Glioblastoma multiforme (GBM) is the most severe form of brain cancer in adults, characterized by its complex vascular network that contributes to resistance to conventional therapies. Thermal therapies, such as magnetic hyperthermia (MHT), emerge as promising alternatives, using heat to selectively target tumor cells while minimizing damage to healthy tissues. The organ-on-a-chip can replicate this complex vascular network of GBM, allowing for detailed investigations of heat dissipation in MHT, while computational simulations refine treatment parameters. In this in silico study, tumor-on-a-chip models were used to optimize MHT therapy by comparing heat dissipation in normal and abnormal vascular networks, considering geometries, flow rates, and concentrations of magnetic nanoparticles (MNPs). In the high vascular complexity model, the maximum velocity was 19 times lower than in the normal vasculature model and 4 times lower than in the low-complexity tumor model, highlighting the influence of vascular complexity on velocity and temperature distribution. The MHT simulation showed greater heat intensity in the central region, with a flow rate of 1 µL/min and 0.5 mg/mL of MNPs being the best conditions to achieve the therapeutic temperature. The complex vasculature model had the lowest heat dissipation, reaching 44.15 °C, compared to 42.01 °C in the low-complexity model and 37.80 °C in the normal model. These results show that greater vascular complexity improves heat retention, making it essential to consider this heterogeneity to optimize MHT treatment. Therefore, for an efficient MHT process, it is necessary to simulate ideal blood flow and MNP conditions to ensure heat retention at the tumor site, considering its irregular vascularization and heat dissipation for effective destruction.
ABSTRACT
This review reports recent advances in polysaccharide-based magnetic hydrogels as smart platforms for different biomedical applications. These hydrogels have proved to be excellent, viable, eco-friendly alternative materials for the biomedical field due to their biocompatibility, biodegradability, and possibility of controlling delivery processes via modulation of the remote magnetic field. We first present their main synthesis methods and compare their advantages and disadvantages. Next, the synergic properties of hydrogels prepared with polysaccharides and magnetic nanoparticles (MNPs) are discussed. Finally, we describe the main contributions of polysaccharide-based magnetic hydrogels in the targeted drug delivery, tissue regeneration, and hyperthermia therapy fields. Overall, this review aims to motivate the synthesis of novel composite biomaterials, based on the combination of magnetic nanoparticles and natural polysaccharides, to overcome challenges that still exist in the treatment of several diseases.
Subject(s)
Biocompatible Materials , Hydrogels , Drug Delivery Systems , Magnetic Fields , PolysaccharidesABSTRACT
Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.
Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.
Subject(s)
Enzyme Immobilizing Agents , NanoparticlesABSTRACT
Abstract Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.
Resumo Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.
ABSTRACT
Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.(AU)
Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.(AU)
Subject(s)
Enzyme Immobilizing Agents , NanoparticlesABSTRACT
Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.
Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.
Subject(s)
Enzymes, Immobilized/metabolism , Magnetite Nanoparticles , Enzyme Stability , Adsorption , Hydrogen-Ion ConcentrationABSTRACT
The purpose of this study was to synthesize a new magnetic material with antimicrobial properties, incorporated into a biopolymer and containing silver nanoparticles (Ag NP) prepared extract of Eugenia umbelliflora as a reducing agent. Silver nanoparticles incorporated into magnetic nanocomposite O-carboxymethylchitosan/y-Fe2O3/Ag0 (CMAgE) composite were synthesized using an extract of E. umbelliflora. The antimicrobial activity of the pathogenic microorganism is reported here. The synthesized nanoparticles were also characterized, and quantified by Ag analysis. The minimum inhibitory concentrations (MIC) of CMAgE against Staphylococcus aureus, Escherichia coli, and Candida albicans were 16.5, 1000 and 500 µg/mL, respectively. The results show that these materials have significant synergistic effect on each other. The potential phytotoxic effect of the nanocomposites was evaluated using Cucumis sativus seeds. The positive values for seedling elongation inhibition (SEI) show that CMAgE and methanol extract of Eugenia umbelliflora (Eug) cause growth inhibition at a concentration of 1000 mg/L. The germination index (GI) values of 40% and 80% at 1000 mg/L, for CMAgE and Eug, respectively, showed inhibition of germination. CMAgE and Eug showed cytotoxic effects against Artemia salina nauplii, with LC50 values of 72.5 µL/mL and < 5.0 µL/mL respectively, after 48 h.
Subject(s)
Anti-Bacterial Agents/pharmacology , Artemia/growth & development , Chitosan/analogs & derivatives , Eugenia/chemistry , Ferrous Compounds/chemistry , Metal Nanoparticles/administration & dosage , Plant Extracts/pharmacology , Silver/chemistry , Animals , Anti-Bacterial Agents/chemistry , Artemia/drug effects , Bacteria/drug effects , Bacteria/growth & development , Chitosan/chemistry , Metal Nanoparticles/chemistry , Nanocomposites/administration & dosage , Nanocomposites/chemistryABSTRACT
This in vitro study aimed to find the best method of granulocyte isolation for subsequentlabeling with multimodal nanoparticles (magnetic and fluorescent properties) to enable detectionby optical and magnetic resonance imaging (MRI) techniques. The granulocytes were obtained fromvenous blood samples from 12 healthy volunteers. To achieve high purity and yield, four differentmethods of granulocyte isolation were evaluated. The isolated granulocytes were labeled withmultimodal superparamagnetic iron oxide nanoparticles (M-SPIONs) coated with dextran, and theiron load was evaluated qualitatively and quantitatively by MRI, near-infrared fluorescence (NIRF)and inductively coupled plasma mass spectrometry (ICP-MS). The best method of granulocyteisolation was Percoll with Ficoll, which showed 95.92% purity and 94% viability. After labeling withM-SPIONs, the granulocytes showed 98.0% purity with a yield of 3.5 × 106 cells/mL and more than98.6% viability. The iron-loading value in the labeled granulocytes, as obtained by MRI, was 6.40 ±0.18 pg/cell. Similar values were found with the ICP-MS and NIRF imaging techniques. Therefore,our study shows that it is possible to isolate granulocytes with high purity and yield and labelingwith M-SPIONs provides a high internalized iron load and low toxicity to cells. Therefore, these MSPION-labeled granulocytes could be a promising candidate for future use ininflammation/infection detection by optical and MRI techniques.
Subject(s)
Cell Separation/methods , Ferric Compounds/chemistry , Granulocytes , Magnetite Nanoparticles/chemistry , Staining and Labeling , Analysis of Variance , Cell Survival , Granulocytes/metabolism , Humans , Immunophenotyping , Magnetic Resonance Spectroscopy , Molecular Imaging/methodsABSTRACT
Novel core-shell superparamagnetic nanofluids composed of magnetic iron oxide (Fe3O4, MION) and cobalt-doped (CoxFe3-xO4, Co-MION) nanoparticles functionalized with carboxymethyl cellulose (CMC) ligands were designed and produced via green colloidal aqueous process. The effect of the degree of substitution (DSâ¯=â¯0.7 and 1.2) and molecular mass (Mw) of CMC and cobalt doping concentration on the physicochemical and magnetic properties of these nanoconjugates were comprehensively investigated using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction, transmission electron microscopy (TEM) with selected area electron diffraction, X-ray fluorescence, dynamic light scattering (DLS), zeta potential (ZP) analysis, vibrating sample magnetometry (VSM) and electron paramagnetic resonance spectroscopy (EPR). The results demonstrated the effect of concentration of carboxylate groups and Mw of CMC on the hydrodynamic dimension, zeta potential, and generated heat by magnetic hyperthermia of MION nanoconjugates. Co-doping of MION showed significant alteration of the electrostatic balance of charges of the nanoconjugates interpreted as effect of surface interactions. Moreover, the VSM and EPR results proved the superparamagnetic properties of these nanocolloids, which were affected by the presence of CMC and Co-doping of iron oxide nanoparticles. These magnetic nanohybrids behaved as nanoheaters for killing brain cancer cells in vitro with prospective future applications in oncology and nanomedicine.
Subject(s)
Carboxymethylcellulose Sodium/chemistry , Carboxymethylcellulose Sodium/pharmacology , Magnetite Nanoparticles/chemistry , Nanocomposites/chemistry , Carboxymethylcellulose Sodium/chemical synthesis , Cell Line, Tumor , Chemistry Techniques, Synthetic , Humans , Magnetic Phenomena , NanotechnologyABSTRACT
Remotely assisted drug delivery by means of magnetic biopolymeric nanoplatforms has been utilized as an important tool to improve the delivery/release of hydrophobic drugs and to address their low cargo capacity. In this work, MnFe2O4 magnetic nanoparticles (MNPs) were synthesized by thermal decomposition, coated with citrate and then functionalized with the layer-by-layer (LbL) assembly of polyelectrolyte multilayers, with chitosan as polycation and sodium alginate as polyanion. Simultaneous conductimetric and potentiometric titrations were employed to optimize the LbL deposition and to enhance the loading capacity of nanoplatforms for curcumin, a hydrophobic drug used in cancer treatment. ~200â¯nm sized biopolymer platforms with ~12â¯nm homogeneously embedded MNPs were obtained and characterized by means of XRD, HRTEM, DLS, TGA, FTIR, XPS and fluorescence spectroscopy techniques to access structural, morphological and surface properties, to probe biopolymer functionalization and to quantify drug-loading. Charge reversals (±30â¯mV) after each deposition confirmed polyelectrolyte adsorption and a stable LbL assembly. Magnetic interparticle interaction was reduced in the biopolymeric structure, hinting at an optimized performance in magnetic hyperthermia for magneto-assisted drug release applications. Curcumin was encapsulated, resulting in an enhanced payload (~100⯵g/mg). Nanocytotoxicity assays showed that the biopolymer capping enhanced the biocompatibility of nanoplatforms, maintaining entrapped curcumin. Our results indicate the potential of synthesized nanoplatforms as an alternative way of remotely delivering/releasing curcumin for medical purposes, upon application of an alternating magnetic field, demonstrating improved efficiency and reduced toxicity.
Subject(s)
Alginates/chemistry , Chitosan/chemistry , Curcumin/chemistry , Ferric Compounds/chemistry , Magnetite Nanoparticles/chemistry , Manganese Compounds/chemistry , Biocompatible Materials/chemistry , Cell Survival/drug effects , Curcumin/metabolism , Curcumin/pharmacology , Drug Carriers/chemistry , Drug Liberation , Glucuronic Acid/chemistry , Hexuronic Acids/chemistry , Humans , Hydrogen-Ion Concentration , Hydrophobic and Hydrophilic Interactions , MCF-7 Cells , Particle SizeABSTRACT
In the present work, we study the role of different components in the formation of more stable iron oxide magnetic nanoparticles (MNPs): ß-cyclodextrin (BCD), 2-hydroxypropyl-ß-cyclodextrin (HP) and citrate anion. MNPs formulations were characterized by FTIR, particles size measurements, zeta potential based on dynamic light scattering principle technique, X-ray powder pattern diffraction, XPS spectroscopy, transmission electron microscopy and thermogravimetric analysis. The results showed that cyclodextrins and citrate plays a key role in order to obtain a lower size of coated MNPs and proved to be an efficient strategy to obtain a more stable colloidal dispersion, avoiding the nanoparticles oxidation, enhancing the irinotecan incorporation and release. Furthermore, citrate-coated BCD-MNPs showed the same cytotoxicity of the free IRI.
ABSTRACT
Background: Cyclodextrin glycosyltransferase (CGTase) from Amphibacillus sp. NPST-10 was successfully covalently immobilized on aminopropyl-functionalized silica coated superparamagnetic nanoparticles; and the properties of immobilized enzyme were investigated. The synthesis process included preparing of core magnetic magnetite (Fe3O4) nanoparticles using solvothermal synthesis; followed by coating of Fe3O4 nanoparticles with dense amino-functionalized silica (NH2-SiO2) layer using in situ functionalization method. The structure of synthesized Fe3O4@NH2-SiO2 nanoparticles was characterized using TEM, XRD, and FT-IR analysis. Fe3O4@NH2-SiO2 nanoparticles were further activated by gluteraaldehyde as bifunctional cross linker, and the activated nanoparticles were used for CGTase immobilization by covalent attachment. Results: Magnetite nanoparticles was successfully synthesized and coated with and amino functionalized silica layer (Fe3O4/NH2-SiO2), with particle size of 50-70 nm. The silica coated magnetite nanoparticles showed with saturation magnetization of 65 emug-1, and can be quickly recovered from the bulk solution using an external magnet within 10 sec. The activated support was effective for CGTase immobilization, which was confirmed by comparison of FT-IR spectra of free and immobilized enzyme. The applied approach for support preparation, activation, and optimization of immobilization conditions, led to high yields of CGTase immobilization (92.3%), activity recovery (73%), and loading efficiency (95.2%); which is one of the highest so far reported for CGTase. Immobilized enzyme showed shift in the optimal temperature from 50 to 55ºC, and significant enhancement in the thermal stability compared with free enzyme. The optimum pH for enzyme activity was pH 8 and pH 7.5 for free and immobilized CGTase, respectively, with slight improvement of pH stability of immobilized enzyme. Furthermore, kinetic studies revealed that immobilized CGTase had higher affinity toward substrate; with k m values of 1.18 ± 0.05 mg/ml and 1.75 ± 0.07 mg/ml for immobilized and free CGTase, respectively. Immobilized CGTase retained 87% and 67 of its initial activity after 5 and 10 repeated batches reaction, indicating that immobilized CGTase on Fe3O4/NH2-SiO2 had good durability and magnetic recovery. Conclusion: The improvement in kinetic and stability parameters of immobilized CGTase makes the proposed method a suitable candidate for industrial applications of CGTase. To best of our knowledge, this is the first report about CGTase immobilization on silica coated magnetite nanoparticles.
Subject(s)
Enzymes, Immobilized/metabolism , Enzymes, Immobilized/chemistry , Magnetite Nanoparticles/chemistry , Glucosyltransferases/metabolism , Glucosyltransferases/chemistry , Spectrophotometry, Infrared , Temperature , Bacillaceae/enzymology , Kinetics , Silicon Dioxide , Cyclodextrins , Culture Techniques , Glucosyltransferases/isolation & purification , Glucosyltransferases/biosynthesis , Hydrogen-Ion ConcentrationABSTRACT
Gliomas are a group of heterogeneous primary central nervous system (CNS) tumors arising from the glial cells. Malignant gliomas account for a majority of malignant primary CNS tumors and are associated with high morbidity and mortality. Glioblastoma is the most frequent and malignant glioma, and despite the recent advances in diagnosis and new treatment options, its prognosis remains dismal. New opportunities for the development of effective therapies for malignant gliomas are urgently needed. Magnetic hyperthermia (MHT), which consists of heat generation in the region of the tumor through the application of magnetic nanoparticles subjected to an alternating magnetic field (AMF), has shown positive results in both preclinical and clinical assays. The aim of this review is to assess the relevance of hyperthermia induced by magnetic nanoparticles in the treatment of gliomas and to note the possible variations of the technique and its implication on the effectiveness of the treatment. We performed an electronic search in the literature from January 1990 to October 2010, in various databases, and after application of the inclusion criteria we obtained a total of 15 articles. In vitro studies and studies using animal models showed that MHT was effective in the promotion of tumor cell death and reduction of tumor mass or increase in survival. Two clinical studies showed that MHT could be applied safely and with few side effects. Some studies suggested that mechanisms of cell death, such as apoptosis, necrosis, and antitumor immune response were triggered by MHT. Based on these data, we could conclude that MHT proved to be efficient in most of the experiments, and that the improvement of the nanocomposites as well as the AMF equipment might contribute toward establishing MHT as a promising tool in the treatment of malignant gliomas.