Endodontic management of a maxillary first molar with three roots and six root canals.

Variations in the root canal anatomy of a maxillary first molar are often challenging to diagnose and treat; thus, clinicians must have a thorough knowledge of the same. This case report highlights the successful nonsurgical endodontic management of a maxillary first molar with an unusual morphology of three roots and six root canals. A total of six root canals (mesiobuccal [MB] 1, MB2, MB3, distobuccal [DB] 1, DB2, and palatal) were detected after initiating root canal therapy and access cavity preparation. Conventional root canal treatment was completed, and postoperative cone-beam computed tomography scanning was done to verify the total number of canals and ensure the adequacy of root canal fillings. Managing such cases with rare variations in the root canal systems could be arduous and thus, clinicians should be well-versed in the methods to identify and manage such complexities to facilitate the successful outcomes of endodontic treatment.

New Frontiers in Endodontics: Tackling the Mesiobuccal 2 (MB2) Canal Challenge in the Maxillary First Molar.

Molars have been observed to have a variety of morphological forms. The least understood and most treatable tooth in the posterior region is the upper first molar. The maxillary first molar has a complex anatomy with a wide variation in the number, size, and shape of the root canals. The case documentation highlights the endodontic treatment of the upper first molar with an anomalous position of the mesiobuccal 2 (MB2) canal. Endodontic therapy success is contingent upon the awareness of the dentist about the differences i.e. morphology and outline of the root and its canal.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

Complete idiopathic resorption of distobuccal root of a maxillary first molar: A case report.

Key Clinical Message: This case report provides a rare case of idiopathic root resorption in maxillary first molar and suggests the importance of CBCT in the diagnosis and treatment outcome of complex endodontic diseases. Endodontic surgery is an effective method for treating teeth with persistent apical periodontitis. Abstract: Idiopathic root resorption is an unexplained root resorption when the patient experiences root resorption without any local or systemic factors. Early diagnosis and appropriate treatment are crucial for long-term outcomes.

Buccal versus buccal palatal infiltration for pulpal anesthesia using 2% lidocaine and 4% articaine: A randomized controlled trial.

Background: The inability in achieving complete pulpal anesthesia with standard buccal infiltration especially in cases with SIP used for maxillary teeth. The study aimed to compare the anesthetic efficacy of buccal and buccal plus palatal infiltration technique using 2% lidocaine and 4% articaine in permanent maxillary first molars with the diagnosis of symptomatic irreversible pulpitis (SIP). Material and method: One hundred and twenty-three patients with clinical diagnosis of SIP, aged 18-50 years were randomly allocated to three treatment groups (N = 41). Group 1(BIL): Buccal infiltration technique using 2% lidocaine with 1:80,000 adrenaline. Group 2(BPIL): combination of buccal plus palatal infiltration using 2% Lidocaine with 1:80,000 adrenaline. Group 3(BIA): Buccal infiltration using 4% articaine with 1:100,000 adrenaline. Pain intensity of patients were recorded before and after the administration of local anesthesia during endodontic procedure that is during caries removal, access preparation and pulp removal using Heft-Parker Visual Analog Scale (HP-VAS). Success was defined by "no pain (0 mm)" or "mild pain (0-54 mm)" during endodontic procedure. The anesthetic efficacy rates were analyzed using chi-square tests, age differences using one-way ANOVA. Results: The final analysis included total of 117 patients. Higher success was observed in group II (85%) in comparison to group I (69%) and group III (74%), but the difference was statistically nonsignificant (p > 0.05). Our results demonstrated a nonsignificant difference between genders in all three groups (p > 0.05). Conclusion: The use of buccal plus palatal infiltration and 4% articaine can provide effective anesthesia as standard buccal infiltration and 2% lidocaine for patients with SIP in maxillary first molars.

Endodontic Treatment of a Maxillary First Molar With Two Separate Palatal Roots: A Case Report.

Maxillary first molars exhibit considerable anatomical variation, with a single palatal root being the most common occurrence, while two palatal roots are notably less frequent. This case report details the endodontic treatment of a maxillary first molar with two separate palatal roots. It highlights the critical importance of recognizing these anatomical variations and their unique challenges during endodontic procedures. This report emphasizes the essential role of advanced diagnostic methods, such as cone-beam computed tomography, and the use of microscopic techniques in identifying and treating such cases.

Maxillary first molar with two distobuccal root canals and cervical deformity: A case report.

The second distobuccal canal in the maxillary first molar is often missed because of the low prevalence rate (0%-4%). The article reports this kind of variation in one case. Promising outcomes have continued up to the present (2-year follow-up).

Unusual imaging appearance of cemental tear in the maxillary first molar on cone-beam computed tomography: A case report.

A cemental tear (CeT) is a definitive clinical entity and its radiographic appearance is well known in single-rooted teeth. However, the imaging features of CeT in multi-rooted teeth have not been clarified. We report a case of CeT which arose in the maxillary first molar and exhibited an unusual appearance in cone-beam computed tomography images. The torn structure was verified as cementum by micro-computed tomography and histological analysis. The hypercementosis, most likely induced by occlusal force, might have been torn from the root by a stronger occlusal force caused by the mandibular implant. An unusual bridging structure was created between the two buccal roots. These features may occur in multi-rooted teeth with long-standing deep pockets and abscesses that are resistant to treatment.

A Cone-Beam Computed Tomographic Analysis of Mesiobuccal Root Canals of Maxillary First Molars.

INTRODUCTION: The maxillary first molar is crucial for proper bite formation and jaw positioning in adulthood. The prevalence of dental caries in the study's sample population suggests it is a common candidate for endodontic therapy. Multiple studies have shown that the canal and root morphology of the maxillary first molar are abnormal. MATERIALS AND METHODS: The distobuccal and palatal roots of 286 maxillary first molars were removed at the furcation. The mesiobuccal roots were then imaged using cone-beam computed tomography (CBCT) on all specimens. The specimens were analyzed in comparison with one another. The following factors were studied. The number and arrangement of canals, as described by Vertucci; the presence or absence of an isthmus, as described by Kim; the canal curvature angle, as measured by the Schneider method; characteristics such as calcified segments, lateral canals, and an apical delta. For the flow analysis, CBCT was utilized to examine the root channel architecture of 286 mesiobuccal (MB) permanent maxillary first molar. RESULTS: Type I canal arrangement was found in 51.6% of teeth, Type II in 33.3%, Type III in 4.6%, Type IV in 4.2%, Type V in 2.5%, and Type VII in 1.5%. Type I, II, III, and V isthmus were each present in 26%, 6.7%, 9.5%, and 10.2% of the samples, respectively. Teeth with MB1 canal angulations of 0-20 degrees, 21-40 degrees, and more than 40 degrees were found in 56, 188, and 41 teeth, respectively. From 0 to 20 degrees, 21 to 40 degrees, and more than 40 degrees, 15 teeth, 88 teeth, and 25 teeth, respectively, had angulations in their MB2 canals. Only 9.8% of the samples had lateral canals, while 16.1% had both accessory canals and apical deltas. There were 19 cases with calcified segments in the coronal third of the MB1 canal and 13 cases in the middle third. There were no calcifications at the distal end of the MB1 canal. Thirteen of the specimens showed calcification only in the most caudal third of the MB2 canal, whereas the middle and distal thirds were uncalcified. CONCLUSION: Utilizing a noninvasive approach, a CBCT scan has the capacity to provide valuable insights into the root canal configuration.

Quantifiable design and comparative evaluation of straight-line minimally invasive endodontic cavity based on the anatomical features of the coronal part of root canal.

Background/purpose: Minimally invasive endodontics has recently become popular in research. This study aimed to develop a new quantifiable straight-line minimally invasive endodontic cavity (SMIEC) for 3-rooted maxillary first molar based on the anatomical features of the coronal part of root canal. Materials and methods: Cone-beam computed tomography (CBCT) images of 80 teeth were converted into models in Mimics Research software. Anatomical features of the coronal part of root canal were measured to develop SMIECs with straight-line accesses to root canals in 3-matic Research software. Twenty models were randomly sampled and each was duplicated for 8 simulation groups: non-treated (NT), traditional endodontic cavity (TEC), ninja endodontic cavity (NEC) and 5 SMIECs. Post-simulation models were subjected to finite element analysis to detect von-Mises stresses in ABAQUS software. Results: Distributions of straight-line accesses to protogenetic root canals had certain manners, hence we developed 5 SMIECs. NEC and SMIECs had less hard tissue loss than TEC and presented different numerical rankings in different structures (P < 0.05). NEC had a less narrow surgery field than SMIECs except SMIEC2/4 (P < 0.05). The peak pericervical stresses of SMIECs were similar, lower than TEC and higher than NEC and NT (P < 0.05). The stress distributions of the 8 groups had certain manners. Conclusion: Five SMIECs with straight-line accesses to root canals were developed, whose biomechanical properties were worse than NEC but better than TEC. Having appropriate structure preservation and surgery field, SMIEC2/4 was a preferred SMIEC.

Morphometric relationships in mesio-buccal roots of maxillary first molars in Saudi subpopulation: A CBCT study.

This CBCT-based study analysed morphometric relationships in Mesio-Buccal (MB) roots of maxillary first molars (MFM). 133 MFM with two MB canals were assessed and classified using Vertucci's classification. MB roots' length and MB1-MB2 canals inter-orifice distances (IOD) were noted. The data were analysed using SPSS software. The most frequently present canal was type IV (59.4%) followed by type II (40.6%). Mean MB roots' length for canals exhibiting type IV was 9.26 ± 0.21 mm and of those exhibiting type II was 12.8 ± 0.42 mm. Statistically significant relationship was found between MB root length and canal type. Mean IOD for type II and type IV canals was 2.4 ± 0.47 and 3.8 ± 0.21 mm, respectively. Statistically significant relationship was found between IOD and canal type. Length of MB root and IOD had a significant association with canal type present in MFM. This knowledge can enhance clinicians' understanding of canal morphology which can increase predictability and success rate of endodontic treatment.

Concurrency of additional canals in mandibular incisors and second mesiobuccal canal in maxillary first molars: A cone-beam computed tomography investigation.

This study investigated the concurrency of additional canals in mandibular incisors and the second mesiobuccal canal in maxillary first molars among the Chinese population. In total, 8644 cone-beam computed tomography images from 8644 patients with bilateral mandibular incisors and maxillary first molars were examined. The data were analysed using Chi-square test, binary logistic regression analysis and receiver operating characteristic curve. Among the patients with additional canals in mandibular central and lateral incisors, 96.2% and 95.5% of them had second mesiobuccal canal in maxillary first molars, respectively. Additional canals of mandibular incisors and second mesiobuccal canal in maxillary first molars exhibited a concurrent relationship. The prevalence of second mesiobuccal canal in maxillary first molars increased with the number of mandibular incisors with additional canals. Moreover, when there was at least one mandibular incisor with additional canals, the presence of the second mesiobuccal canal in maxillary first molars could be highly expected.

Non-surgical Root Canal Treatment of an Upper First Molar With an Unusual Morphology: A Case Report.

This paper presents the unusual morphology of an upper right first molar with two roots, each containing a single canal, in a patient seeking emergency endodontic treatment. Clinical and radiographic examinations revealed the unusual root canal morphology of the tooth, which required further investigation using cone beam computed tomography (CBCT) imaging, which confirmed this unusual anatomical structure. It was also noted that the upper right first molar was asymmetrical to the upper left first molar, which had the normal three-root morphology. The buccal and palatal canals were instrumented using ProTaper Next Ni-Ti rotary instruments and enlarged to ISO size 30, with a taper of 0.7; irrigated with 2.5% NaOCl; filled with gutta-percha using the warm-vertical-compaction technique, with the aid of a dental operating microscope (DOM); and then confirmed via periapical radiograph. The DOM and CBCT are valuable aids that helped us to confirm the endodontic diagnosis and treatment of this unusual morphology.

3D occlusal changes of upper first molars after rapid maxillary expansion on permanent versus deciduous teeth: a retrospective multicenter CBCT study.

BACKGROUND: The purpose of this study was to compare the three-dimensional dental changes for the maxillary first molars and the overall skeletal effects achieved after expansion between the rapid maxillary expansion (RME) appliance attached to two different anchor units, the maxillary deciduous molars and the maxillary permanent first molars. METHODS: Patients were retrospectively selected according to the anchorage unit used for RME: deciduous upper second molars (RME-E group; 10 M, 10 F; mean age 8.4 ± 1.1 years) and first upper permanent molars (RME-6 group; 10 M, 10 F; mean age 12.6 ± 1.8 years). CBCT scans were obtained before treatment start (T1) and after retention and removal of the expander (T2). Images were analyzed using a new three-dimensional intra-hemi-maxillary reference system. 3D landmarks were marked to calculate all changes on maxillary first permanent molars; mesio-distal and buccal-lingual inclination and rotation, as well as intermolar and interforaminal distances were calculated. The Wilcoxon test was used to compare within-group changes, whereas the Mann-Whitney test was used to compare between-group differences, with the significance level set at 0.05. RESULTS: In the RME-E group, significant distorotation and lingual inclination of the first permanent molars at T2 were observed (p < 0.01); in the RME-6 group, only the buccolingual inclination of the crossbite side after RME was resulted statistically significant (p < 0.01). In both groups, intermolar and interforaminal values increased significantly (p < 0.01). Intergroup analysis showed a significantly higher distorotation and reduced buccal inclination of maxillary first permanent molars in the RME-E group after RME (p < 0.01). CONCLUSIONS: RME is effective in treating maxillary transverse hypoplasia; RME anchored too deciduous teeth spontaneously reduces buccal inclination and increases distorotation of maxillary first permanent molars, whereas anchorage to permanent molars is associated with increased buccal inclination, albeit with little clinical significance.

Assessment of the coronal root canal morphology of permanent maxillary first molars using digital 3D-reconstruction technology based on micro-computed tomography data.

Background: The design of minimally invasive access has become a hotspot. This study aimed to evaluate the coronal root canal morphology of permanent maxillary first molars to facilitate the design of endodontic access cavities for minimally invasive linear access. Materials and methods: A selection of 91 permanent maxillary first molars was evaluated. Three-dimensional tooth models were reconstructed using micro-computed tomography data. Root canal prevalence and coronal root canal landmarks were recorded. The positional coordinates of landmarks in the horizontal plane and the angles and directions of coronal root canal curvature in the horizontal and axial planes were also assessed. Results: The detection rates of the mesiobuccal (MB), distobuccal (DB), and palatal (P) canals were 100%, whereas that of the second mesiobuccal (MB2) canals was 68.1%. All landmarks were located near the central fossa. In the axial plane, the average angles of coronal root canal curvature were DB (27.05°) > MB (25.43°) > P (20.71°) in teeth with three canals, and MB2 (33.20°) > MB (29.61°) > DB (28.40°) > P (23.69°) in teeth with four canals. In the horizontal plane, the average angles were P (78.15°) > DB (42.34°) > MB (32.41°) in teeth with three canals, and P (81.26°) > DB (43.44°) > MB (41.22°) > MB2 (9.41°) in teeth with four canals. Conclusion: In maxillary first molars, coronal root canals tend to converge towards the occlusal surface. The results of this study could be applied to improve the precision of endodontic access cavity designs of minimally invasive access.

Descripción de la morfología del sistema de canales radiculares del primer molar maxilar mediante tomografía computarizada cone-beam en una población chilena / Description of the morphology of the root canal system of the maxillary first molar using cone-beam computed tomography in a Chilean population

Describir la morfología del sistema de canales radiculares del primer molar maxilar en una población chilena mediante exámenes de tomografía computarizada Cone-Beam (CBCT). Se realizó un estudio observacional descriptivo en el cual se utilizaron los exámenes CBCT de pacientes que fueron atendidos en un Centro de Radiología Maxilofacial privado durante el período comprendido entre Enero y Diciembre del año 2018 en la ciudad de Temuco, Chile, los cuales fueron observados de manera independiente por dos investigadores previamente calibrados. Se observaron 199 exámenes CBCT. En la raíz mesiobucal,predominaron las morfologías tipo II, I y IV de Vertucci respectivamente, mientras que en la raíz distobucal y palatina predominó la morfología tipo I. El canal MB2 estuvo presente en el 62,3 % de los casos, con una prevalencia significativamente mayor en pacientes jóvenes. En la mayoría de los primeros molares maxilares de los habitantes de la ciudad de Temuco se observaron tres raíces separadas y la presencia de cuatro canales. Se determinó una alta frecuencia del canal MB2 en la raíz MB.

SUMMARY: The objective of this study was to describe the morphology of the root canal system of the maxillary first molar in a Chilean population through Cone-Beam computed tomography (CBCT) examinations. A descriptive observational study was carried out in which the CBCT examinations of patients who were treated in a private maxillofacial radiology center during the period between January and December 2018 in Temuco, Chile, were used which were observed independently by two previously calibrated researchers. In this analysis 199 CBCT exams were observed. In the mesiobuccal root, Type II, I and IV morphologies predominated respectively, while in the distobuccal and palatal root, Type I morphology predominated. The MB2 canal was present in 62.3 % of cases, with a higher prevalence in young patients. Three separate roots and the presence of four canals were observed in most of the maxillary first molars of the patients in Temuco. A high frequency of the MB2 canal was determined in the root MB.

The relationship of tooth crown dimensions between first molar and central incisor in maxilla.

The purpose of this study was to investigate a correlation between the cusp dimensions of the first molar and mesiodistal crown diameters of the central incisors in the maxilla. The study materials were composed of dental casts from 29 modern Japanese female subjects with a mean age of 20 years and 8 months. The mesiodistal crown diameters of the maxillary central incisors were measured. The mesiodistal and bucco-lingual crown diameters and the cusp diameters of the maxillary first molars, such as the paracone, metacone, protocone, and hypocone, were also measured. The crown areas and indices of the first molars were calculated. The Spearman's single rank correlation coefficients between the mean values for the crown dimensions of the first molars and the mesiodistal crown diameters of the central incisors were calculated. The hypocone cusp diameter and the hypocone index were the largest compared to those of the paracone, protocone, and metacone cusps. The bucco-lingual diameter and hypocone cusp diameter of the first molars positively correlated with the mesiodistal crown diameters of the central incisors on the same sides. There were positive correlations between the hypocone index of the first molars and the mesiodistal crown diameters of the central incisors. Based on the results, if a large hypocone is observed in eruption of the maxillary first molars, it will be predictable that of the mesiodistal crown diameter of the maxillary central incisor large.

The morphology of permanent maxillary first molars evaluated by cone-beam computed tomography among a Yemeni population.

BACKGROUND: The study's objective was to use CBCT to ascertain the root and root canal anatomy of the permanent maxillary first molars in a Yemeni population. It was considered how gender affected the prevalence of root canal morphology. METHODS: A sample of 373 CBCT records of maxillary permanent first molars belonging to 373 Yemeni individuals (162 males and 211 females) aged between 12 and 65 years were included in this study. Using CBCT on the teeth, the root form and canal morphology for each root based on Vertucci's classification were evaluated. The distribution of MB2 occurrence was documented. The prevalence and resemblance of the men and females were investigated. The Chi-square test was performed to evaluate the findings. RESULTS: Of the 373 maxillary first molars studied, the three separated root form was found in 94.9% of the studied MFMs while the two fused and one separate root form was found in 4.5%. The majority of the three-rooted MFMs (82.6%) had more than three root canals (four canals in 77.2% and five canals in 5.4%). The prevalence of MB2 was as high as 82.3% of the three-rooted MFMs. Vertucci type II configuration was the most frequent canal type (25%) followed by Vertucci type III (23.1%) and Vertucci type I (17.7%) in the mesiobuccal root. Vertucci type I was the most prevalent canal configuration in the distobuccal root and palatal root of the three-rooted MFMs (96% and 99.5%, respectively). CONCLUSIONS: The maxillary first molars' root canal morphology indicated notable variations among a Yemeni population. The maxillary first molars of most of the Yemeni participants in this study had three roots and four canals. In light of the high occurrence of MB2 (82.3%) in permanent maxillary first molars, our findings emphasize the need of searching for and using cutting-edge techniques to locate the MB2 canals. Males outnumbered females in proportion.

Three-dimensional location and distribution of the center of resistance in the maxillary first molar applied to occlusal force.

We aimed to investigate the center of resistance (CRes) of the maxillary first molar to set the occlusal force through finite element analysis. The inclination of the molar was measured, with loading to the root on the crown, and the position and direction of the load that minimized the inclination were investigated. The CRes was defined as the set of midpoints of the minimum distances between the two lines. Nine hundred and ninety CRes points were estimated from forty-five lines. The CRes was estimated as the point 1.22 mm (Z), -0.74 mm (X), and 0.23 mm (Y) from the origin in the apical, distal, and buccal side directions, respectively, with an ellipsoid area of 1.578 (Z) mm×0.097 (X) mm×0.100 (Y) mm. Further research is required to make effective use of the CRes identified in this study for clinical applications.

Endodontic Retreatment of a Maxillary First Molar With Orthograde Retrieval of a Separated File by a Combination of Ultrasonic and File Braiding Techniques: A Case Report.

The persistence of apical periodontitis after endodontic therapy can be attributed to biological causes or when the treatment approaches have proven insufficient in completely eradicating the intra-radicular infection. This case report describes the endodontic retreatment of a maxillary molar in which file separation occurred during the cleaning and shaping procedure. The separated file was successfully retrieved utilizing a combination of ultrasonic and braiding techniques. The field of ultrasonics has undergone a thorough investigation and has been demonstrated to be a conservative technique with minimal radicular dentin trephination. The braiding technique is also a conservative method that involves the use of several braided H-files to apply a gripping force, facilitating the extraction of foreign bodies. The utilization of this methodology has been documented in the endodontic academic literature.