Using the Assembly Time as a Tool to Control the Surface Morphology and Separation Performance of Membranes with a Tannic Acid-Fe3+ Selective Layer.

Thin-film composite (TFC) membranes containing a metal-polyphenol network (MPN)-based selective layer were fabricated on a porous polyacrylonitrile support. The MPN layer was formed through coordination-based self-assembly between plant-based tannic acid (TA) and an Fe3+ ion. For the first time, we demonstrate that TFC membranes containing TA-Fe3+ selective layers can separate small organic solutes in aqueous media from equimolar mixtures of solutes. The effect of the assembly time on the characteristics and performance of the fabricated selective layer was investigated. An increase in the assembly time led to the formation of selective layers with smaller effective pore sizes. The tannic acid-Fe3+ selective layer exhibited a low rejection towards neutral solutes riboflavin and poly(ethylene glycol) while high rejections were observed for anionic dyes of orange II and naphthol green B. Permeation selectivities in the range of 2-27 were achieved between neutral and charged dyes in both single- and mixed-solute experiments, indicating the significant role of Donnan exclusion and the charge-selective nature of the membranes. The rejection efficiency improved with an increasing assembly time. Overall, this study demonstrates that the assembly time is a vital casting parameter for controlling the permeance, rejection and selectivity of thin-film composite membranes with a tannic acid-Fe3+ selective layer.

Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal.

The removal of toxic heavy metal ions from water resources is crucial for environmental protection and public health. In this study, we address this challenge by developing a surface functionalization technique for the selective adsorption of these contaminants. Our approach involves atomic layer deposition (ALD) followed by vapor-phase silanization of porous substrates. We utilized porous silica gel powder (∼100 µm particles, 89 m2/g surface area, ∼30 nm pores) as an initial substrate. This powder was first coated with ∼0.5 nm ALD Al2O3, followed by vapor-phase grafting of a thiol-functional silane. The modified powder, particularly in acidic conditions (pH = 4), showed high selectivity in adsorbing Cd(II), As(V), Pb(II), Hg(II), and Cu(II) heavy metal ions in mixed ion solutions over common benign ions (e.g., Na, K, Ca, and Mg). Langmuir adsorption isotherms and breakthrough adsorption studies were conducted to assess heavy metal binding affinity and revealed the order of Cd(II) < Pb(II) < Cu(II) < As(V) < Hg(II), with a significantly higher affinity for As(V) and Hg(II) ions. Time-dependent uptake studies demonstrated rapid removal of heavy metal ions from aqueous environments, with Hg(II) exhibiting the fastest adsorption kinetics on thiol-modified surfaces. These findings highlight the potential of ALD and vapor-phase silanization to create effective adsorbents for the targeted removal of hazardous contaminants from water.

Improving Aqueous Zinc Ion Batteries with Alkali Metal Ions.

Aqueous zinc (Zn) ion batteries have received broad attention recently. However, their practical application is limited by severe Zn dendrite growth and the hydrogen evolution reaction. In this study, three alkali metal ions (Li+, Na+, and K+) are added in ZnSO4 electrolytes, which are subjected to electrochemical measurements and molecular dynamics simulations. The studies show that since K+ has the highest mobility and self-diffusion coefficient among the four ions (Li+, Na+, K+, and Zn2+), it enables K+ to preferentially approach a zinc dendrite at an earlier time, driven by a negative electric field during a cathodic process. The electric double layer, with K+ around the negatively charged Zn dendrite, inhibits dendrite growth and mitigates the hydrogen evolution reaction on the Zn anode. Under this kinetic effect, the Zn-Zn symmetric cell with K+ exhibits a long cycling stability of 1000 h at 1 mA·cm-2 of 1 mAh·cm-2 and 190 h at 30 mA·cm-2 of 2 mAh·cm-2. Such a kinetic effect is also observed with additives Na+ and Li+, though less profound than that of K+.

Application of catalytic technology based on the piezoelectric effect in wastewater purification.

The demands of human life and industrial activities result in a significant influx of toxic contaminants into aquatic ecosystems. In particular, organic pollutants such as antibiotics and dye molecules, bacteria, and heavy metal ions are represented, posing a severe risk to the health and continued existence of living organisms. The method of removing pollutants from water bodies by utilizing the principle of the piezoelectric effect in combination with chemical catalytic processes is superior to other wastewater purification technologies because it can collect water energy, mechanical energy, etc. to achieve cleanliness and high removal efficiency. Herein, we briefly introduced the piezoelectric mechanisms and then reviewed the latest advances in the design and synthesis of piezoelectric materials, followed by a summary of applications based on the principle of piezoelectric effect to degrade pollutants in water for wastewater purification. Moreover, water purification technologies incorporating the piezoelectric effect, including piezoelectric effect-assisted membrane filtration, activation of persulfate, and battery electrocatalysis are elaborated. Finally, future challenges and research directions for the piezoelectric effect are proposed.

A cascade nanosystem with "Triple-Linkage" effect for enhanced photothermal and activatable metal ion therapy for hepatocellular carcinoma.

Due to the limitations of single-model tumor therapeutic strategies, multimodal combination therapy have become a more favorable option to enhance efficacy by compensating for its deficiencies. However, in nanomaterial-based multimodal therapeutics for tumors, exploiting synergistic interactions and cascade relationships of materials to achieve more effective treatments is still a great challenge. Based on this, we constructed a nanoplatform with a "triple-linkage" effect by cleverly integrating polydopamine (PDA), silver nanoparticles (AgNPs), and glucose oxidase (GOx) to realize enhanced photothermal therapy (PTT) and activatable metal ion therapy (MIT) for hepatocellular carcinoma (HCC) treatment. First, the non-radiative conversion of PDA under light conditions was enhanced by AgNPs, which directly enhanced the photothermal conversion efficiency of PDA. In addition, GOx reduced the synthesis of cellular heat shock proteins by interfering with cellular energy metabolism, thereby enhancing cellular sensitivity to PTT. On the other hand, H2O2, a by-product of GOx-catalyzed glucose, could be used as an activation source to activate non-toxic AgNPs to release cytotoxic Ag+, achieving activatable Ag+-mediated MIT. In conclusion, this nanosystem achieved efficient PTT and MIT for HCC by exploiting the cascade effect among PDA, AgNPs, and GOx, providing a novel idea for the design of multimodal tumor therapeutic systems with cascade regulation.

Metal copper and silver revealed potent antimicrobial activity for treating Caenorhabditis elegans infected with carbapenemase-producing Klebsiella pneumonia.

OBJECTIVES: The increasing issue of bacterial resistance, coupled with inadequate progress in developing new antibiotics, necessitates exploring alternative treatments. Antibacterial biomaterials, such as silver and copper, possess advantageous properties such as heat resistance, durability, continuity, and safety. Particularly, they can effectively eliminate pathogenic bacteria while preserving cellular integrity, emphasizing the necessity of identifying optimal metal ion concentrations for practical application. Caenorhabditis elegans (C. elegans) can serve as a noteworthy model in this context. This study employed a C. elegans infection model to assess the efficacy of antibacterial metal ions. METHODS: Hematoxylin-eosin (HE) staining and inductively coupled plasma mass spectrometry (ICP-MS) assay were utilized to determine the toxic levels of metal ions in mice. Additionally, RNA sequencing (RNA-seq) and assessment of reactive oxygen species (ROS) production in the C. elegans model were conducted to elucidate the mechanisms underlying metal ion toxicity. RESULTS: Silver ion concentrations ranging from 10-6 to 10-7 M and copper ion concentrations ranging from 10-4 to 10-5 M exhibited antimicrobial properties without eliciting cytotoxic effects. Analysis of the transcriptome data derived from mRNA isolated from C. elegans indicated that CRKP infection activated the FoxO signaling pathway, potentially leading to ROS accumulation and C. elegans demise. CONCLUSIONS: In conclusion, C. elegans serves as a comprehensive infection model for assessing antibacterial metal ions.

Tripeptide-Assisted Gold Nanocluster Formation for Fe3+ and Cu2+ Sensing.

Fluorescent gold nanoclusters (AuNCs) have shown promise as metal ion sensors. Further research into surface ligands is crucial for developing sensors that are both selective and sensitive. Here, we designed simple tripeptides to form fluorescent AuNCs, capitalizing on tyrosine's reduction capability under alkaline conditions. We investigated tyrosine's role in both forming AuNCs and sensing metal ions. Two tripeptides, tyrosine-cysteine-tyrosine (YCY) and serine-cysteine-tyrosine (SCY), were used to form AuNCs. YCY peptides produced AuNCs with blue and red fluorescence, while SCY peptides produced blue-emitting AuNCs. The blue fluorescence of YCY- and SCY-AuNCs was selectively quenched by Fe3+ and Cu2+, whereas red-emitting YCY-AuNC fluorescence remained stable with 13 different metal ions. The number of tyrosine residues influenced the sensor response. DLS measurements revealed different aggregation propensities in the presence of various metal ions, indicating that chelation between the peptide and target ions led to aggregation and fluorescence quenching. Highlighting the innovation of our approach, our study demonstrates the feasibility of the rational design of peptides for the formation of fluorescent AuNCs that serve as highly selective and sensitive surface ligands for metal ion sensing. This method marks an advancement over existing methods due to its dual capability in both synthesizing gold nanoclusters and detecting analytes, specifically Fe3+ and Cu2+.

The Programmable Catalytic Core of 8-17 DNAzymes.

8-17 DNAzymes (8-17, 17E, Mg5, and 17EV1) are in vitro-selected catalytic DNA molecules that are capable of cleaving complementary RNAs. The conserved residues in their similar catalytic cores, together with the metal ions, were suggested to contribute to the catalytic reaction. Based on the contribution of the less conserved residues in the bulge loop residues (W12, A15, A15.0) and the internal stem, new catalytic cores of 8-17 DNAzymes were programmed. The internal stem CTC-GAG seems to be more favorable for the DNAzymes than CCG-GGC, while an extra W12.0 led to a significant loss of activity of DNAzymes, which is contrary to the positive effect of A15.0, by which a new active DNAzyme 17EM was derived. It conducts a faster reaction than 17E. It is most active in the presence of Pb2+, with the metal ion preference of Pb2+ >> Zn2+ > Mn2+ > Ca2+ ≈ Mg2+. In the Pb2+ and Zn2+-mediated reactions of 17EM and 17E, the same Na+- and pH dependence were also observed as what was observed for 17E and other 8-17 DNAzymes. Therefore, 17EM is another member of the 8-17 DNAzymes, and it could be applied as a potential biosensor for RNA and metal ions.

Metal Ion-Induced Acid Hydrolysis Strategy for the One-Step Synthesis of Tough and Highly Transparent Hydrolyzed Polyacrylamide Hydrogels.

Polyacrylamide (PAM) hydrogel is hard to enhance through coordination bonds because amide groups rarely coordinate with metal ions strongly in an aqueous solution. It is known that the aqueous solution of ZrOCl2.8H2O can be strongly acidic depending on its concentration. Consequently, through a facile one-step metal ion-induced acid hydrolysis strategy (MIAHS), tough and highly transparent hydrolyzed PAM physical hydrogels are prepared by using ZrOCl2.8H2O in this work. The formation of the partially hydrolyzed PAM physical hydrogels elucidates that the side reaction of imidization during common acid hydrolysis of PAM can be perfectly overcome because the structure of the Zr(IV) ion and its interaction with amide groups promote selective acidic hydrolysis from amide to carboxyl groups. Compared to most coordination cross-linked hydrogels, which need at least two-step fabrication, the hydrolyzed PAM hydrogel via MIAHS can be obtained by one-step synthesis due to the weak interaction between amide groups and Zr(IV). The obtained PAM hydrogel cross-linked by hydrogen bonds and coordination bond between Zr(IV) and carboxyl is a multibond network (MBN) and can achieve hierarchical energy dissipation, which exhibits excellent mechanical properties (tensile strength of 3.15 MPa, elongation at break of 890%, and toughness of 17.0 MJ m-3), high transparence (transmittance of 95%), and outstanding conductivity (5.6 S m-1) at water content of 80 wt %. The high gauge factor (from 2.24 to 12.8 as the strain increases from 0 to 400%) endows the hydrolyzed PAM hydrogels with promising application as strain sensors. Furthermore, in addition to ZrOCl2.8H2O, the fact that various hydrolyzable compounds of Ti(IV), Zr(IV) Hf(IV), and Sn(IV) can also fabricate tough hydrolyzed PAM hydrogels verifies the universality of MIAHS. Therefore, the simple, efficient, and universal MIAHS will shed new light on preparing functional PAM-based hydrogels.

Colorimetric and Fluorometric N-Acylhydrazone-based Chemosensors for Detection of Single to Multiple Metal Ions: Design Strategies and Analytical Applications.

The development of optical sensors for metal ions has gained significant attention due to their broad applications in biology, the environment, and medicine. Colorimetric and fluorometric detection methods are particularly valued for their simplicity, cost-effectiveness, high detection limits, and analytical power. Among various chemical probes, the hydrazone functional group stands out for its extensive study and utility, owing to its ease of synthesis and adaptability. This review provides a comprehensive overview of N-acylhydrazone-based probes, serving as highly effective colorimetric and fluorometric chemosensors for a diverse range of metal ions. Probes are categorized into single-ion, dual-ion, and multi-ion chemosensors, each further classified based on the detected metal(s). Additionally, the review discusses detection modes, detection limits, association constants, and spectroscopic measurements.

Rubik's cube PBA frameworks for optimizing the electrochemical performance in alkali metal-ion batteries.

PBA frameworks have stood out among metal-organic frameworks because of their easy preparation, excellent stability, porous structures, and rich redox properties. Unfortunately, their non-ideal conductivity and significant volume expansion during cycling prevent more widespread application in alkali-metal-ion (Li+, Na+, and K+) batteries. By changing the type and molar ratio of metal ions, Rubik's PBA frameworks with infinite structural variations were obtained in this study, just like the Rubik's cube undergoes infinite changes during the rotation. X-ray adsorption fine structure measurements have documented the existence and determined the coordination environment of the metal ions in the Rubik's PBA framework. Benefiting from the more stable Rubik's cube structures with diverse composition, enhanced conductivity, and greater adsorption capacity, the obtained Rubik's cubes CoM-PBA anodes, especially CoZn-PBA deliver the enhanced cycling and rate performance in all the alkali-metal-ion batteries. The findings are supported by density functional theory calculations. Ex-situ X-ray photoelectron spectroscopy, and in-situ X-ray diffraction measurements were undertaken to explore the storage mechanism of CoZn-PBA anodes. Our results further demonstrate that the Rubik's cube PBA framework-based materials could be widely applied in the field of alkali-metal-ion batteries.

Effect of diastereoisomeric composition on the chromatographic retention of phosphorothioated oligonucleotides using three different liquid chromatography systems.

To increase understanding of the interactions and effects of the diastereoisomeric character of phosphorothioate (PS) oligonucleotides on chromatographic retention, three chromatographic methods [in-series reversed phase-strong anion exchange (RP-SAX), ion pair-reversed phase and metal ion complexation chromatography (MICC)] were applied to the characterization of stereo-enriched compounds. Chromatographic systems are widely available, amenable to routine applications, and simple to deploy in comparison to more advanced instrumentation (e.g., 31P NMR) and procedures (e.g., enzymatic digestion). Analogous diastereoisomeric distribution profiles were obtained by RP-SAX and IP-RP based on their common mechanism of separation involving the combination of hydrophobic and electrostatic interactions. Similar linear relationships between retention time (tR) and the numbers of stereo random, Rp, and Sp PS linkages were obtained with both methods. Sp-enriched diastereoisomers were retained longer than stereo random and Rp-enriched diastereoisomers. MICC produced much broader diastereoisomeric peak distributions than the other two methods due to its more complicated nature of interaction. Average mass spectra showed a smaller number of Ag ions (1-7) complex with early eluting diastereoisomers than with later eluting diastereoisomers (which complex between 6-12 Ag ions). A higher late-to-early peak UV area ratio was obtained for a sample containing 10 Sp linkages vs one containing 10 Rp linkages pointing to the tendency of the Sp diastereoisomers for increased interactions which could be explained by structures with more open or stretched configurations. Consideration of the peak shapes of the MICC distributions led to comparable hierarchical cluster analysis (HCA) classification to that produced by the IP-RP method, indicating a good orthogonality between the two methods. Preliminary analysis of the data using partial least squares showed that it should be possible to determine the diastereoisomeric composition of PS oligonucleotides from chromatographic data following appropriate data training.

Metal Ion Responsive Luminescent Bio-Templated Co-Assemblies: Label-Free Detection of Multi-Metal Ions in Aqueous Media.

Recently, anionic bio-templates have emerged as promising platforms for designing dynamic and stimuli-responsive chromophoric assemblies capable of light harvesting in aqueous media thereby mimicking natural photosynthesis. Here, we present multi-metal ion-responsive luminescent co-assemblies between cationic pyrene-imidazolium amphiphile and anionic bio-templates (ATP, heparin, and DNA) in aqueous media. The anionic bio-templates enhance Förster resonance energy transfer (FRET) in the co-assemblies, with pyrene serving as an excellent donor for generating tunable multi-luminescent materials with embedded acceptor dyes. However, a significant loss in energy transfer towards acceptor dyes was observed in the presence of various metal ions, attributed to excimeric emission quenching facilitated by electron transfer between the pyrene chromophore and metal ions. Interestingly, detailed studies revealed that only ATP-based co-assemblies exhibited quenching phenomena in the presence of metal ions, contrasting with heparin and ctDNA co-assemblies. Additionally, label-free detection of multi-metal ions in aqueous environments, such as Fe2+, Fe3+, and Cu2+ ions, was successfully achieved with lower detection limits of 0.01 µM (3 ppb), 0.12 µM (30 ppb), and 0.58 µM (150 ppb) respectively. These co-assemblies hold significant promise for practical applications in environmental and biomedical sensing, enabling sensitive monitoring of metal ion concentrations.

CardioDPi: An explainable deep-learning model for identifying cardiotoxic chemicals targeting hERG, Cav1.2, and Nav1.5 channels.

The cardiotoxic effects of various pollutants have been a growing concern in environmental and material science. These effects encompass arrhythmias, myocardial injury, cardiac insufficiency, and pericardial inflammation. Compounds such as organic solvents and air pollutants disrupt the potassium, sodium, and calcium ion channels cardiac cell membranes, leading to the dysregulation of cardiac function. However, current cardiotoxicity models have disadvantages of incomplete data, ion channels, interpretability issues, and inability of toxic structure visualization. Herein, an interpretable deep-learning model known as CardioDPi was developed, which is capable of discriminating cardiotoxicity induced by the human Ether-à-go-go-related gene (hERG) channel, sodium channel (Na_v1.5), and calcium channel (Ca_v1.5) blockade. External validation yielded promising area under the ROC curve (AUC) values of 0.89, 0.89, and 0.94 for the hERG, Na_v1.5, and Ca_v1.5 channels, respectively. The CardioDPi can be freely accessed on the web server CardioDPipredictor (http://cardiodpi.sapredictor.cn/). Furthermore, the structural characteristics of cardiotoxic compounds were analyzed and structural alerts (SAs) can be extracted using the user-friendly CardioDPi-SAdetector web service (http://cardiosa.sapredictor.cn/). CardioDPi is a valuable tool for identifying cardiotoxic chemicals that are environmental and health risks. Moreover, the SA system provides essential insights for mode-of-action studies concerning cardiotoxic compounds.

Fibrillation of soy protein isolate in the presence of metal ions: Structure and gelation behavior.

The structure and functional properties of protein fibrils are closely related to environmental factors in fibrillation. Herein, soy protein isolate fibrils (SPIFs, 22 mg/mL) were prepared under acid-heating conditions in the presence of 100 mM metal ions (K+, Na+, Ca2+, Mg2+, and Fe3+). Except for Fe3+, fibrillation and subsequent larger fibril aggregates were promoted, ultimately leading to gel formation. Compared with K+ or Na+, the addition of Ca2+ or Mg2+ resulted in more organized SPIF structures with increased ß-sheet contents and higher ThT fluorescence intensities. Furthermore, both of them resulted in longer fibrils with an average contour length of 700-800 nm, which significantly enhanced the storage modulus. However, the presence of Fe3+ accelerated protein hydrolysis and inhibited SPIF formation, resulting in samples consistently exhibited liquid behavior. These findings provide a foundation for understanding the influence of metal ions on regulating the fibrillation and gelling properties of SPIFs.

Quantum Magnetism of the Iron Core in Ferritin Proteins-A Re-Evaluation of the Giant-Spin Model.

The electron-electron, or zero-field interaction (ZFI) in the electron paramagnetic resonance (EPR) of high-spin transition ions in metalloproteins and coordination complexes, is commonly described by a simple spin Hamiltonian that is second-order in the spin S: H=D[Sz2-SS+1/3+E(Sx2-Sy2). Symmetry considerations, however, allow for fourth-order terms when S ≥ 2. In metalloprotein EPR studies, these terms have rarely been explored. Metal ions can cluster via non-metal bridges, as, for example, in iron-sulfur clusters, in which exchange interaction can result in higher system spin, and this would allow for sixth- and higher-order ZFI terms. For metalloproteins, these have thus far been completely ignored. Single-molecule magnets (SMMs) are multi-metal ion high spin complexes, in which the ZFI usually has a negative sign, thus affording a ground state level pair with maximal spin quantum number mS = ±S, giving rise to unusual magnetic properties at low temperatures. The description of EPR from SMMs is commonly cast in terms of the 'giant-spin model', which assumes a magnetically isolated system spin, and in which fourth-order, and recently, even sixth-order ZFI terms have been found to be required. A special version of the giant-spin model, adopted for scaling-up to system spins of order S ≈ 103-104, has been applied to the ubiquitous iron-storage protein ferritin, which has an internal core containing Fe3+ ions whose individual high spins couple in a way to create a superparamagnet at ambient temperature with very high system spin reminiscent to that of ferromagnetic nanoparticles. This scaled giant-spin model is critically evaluated; limitations and future possibilities are explicitly formulated.

In situ growth of Mn3O4 nanoparticles on accordion-like Ti3C2Tx MXene for advanced aqueous Zn-Ion batteries.

Manganese-based cathodes are competitive candidates for state-of-the-art aqueous zinc-ion batteries (AZIBs) because of their easy preparation method, sufficient nature reserve, and environmental friendliness. However, their poor cycle stability and low rate performance have prevented them from practical applications. In this study, Mn3O4 nanoparticles were formed in situ on the surface and between the interlayers of Ti3C2Tx MXene, which was pretreated by the intercalation of K+ ions. Ti3C2Tx MXene not only provides abundant active sites and high conductivity but also hinders the structural damage of Mn3O4 during charging and discharging. Benefiting from the well-designed K-Ti3C2@Mn3O4 structure, the battery equipped with the K-Ti3C2@Mn3O4 cathode achieved a maximum specific capacity of 312 mAh/g at a current density of 0.3 A/g and carried a specific capacity of approximately 120 mAh/g at a current density of 1 A/g, which remained stable for approximately 500 cycles. The performance surpasses that of most reported Mn3O4-based cathodes. This study pioneers a new approach for building better cathode materials for AZIBs.

A novel bio-based fluorescent N, P-CDs@CMC/PEI composite hydrogel for sensitive detection and efficient capture of toxic heavy metal ions.

To address the serious environmental pollution problems of toxic heavy metal ions in water bodies, a novel fluorescent composite hydrogel N, P-CDs@CMC/PEI with a bio-based polymer matrix of carboxylmethyl cellulose (CMC), polyethylenimine (PEI) as a second interpenetrating network and N, P-doped carbon dots (N, P-CDs) as a fluorescent probe was prepared for simultaneous detection and capture of HMIs by a facile and simple one-step approach. The morphology, chemical structure, swelling ratio, mechanical strength and fluorescence property of these composite hydrogels were studied through varied characterization methods. The composite hydrogel showed sensitive and selective fluorescence response with Hg(II) and Fe(III) and the according LOD values were 0.48 and 0.27 mg L-1, respectively. The relationship between the types of the adsorbent, pH value, HMIs concentration and temperature on the adsorption capacity of these composite hydrogels were studied. The pseudo-second-order model and Langmuir model were applicable to explain the adsorption process of CPH2 for Hg(II) and Cr(VI). The maximum calculated adsorption capacities for the above targeted HMIs by Langmuir model were 846.7 and 289.5 mg g-1, respectively. Coexisting inorganic salts and organic acids in low concentration had little effects on Hg(II) and Cr(VI) removal and the composite hydrogel showed good recyclability and stability for Hg(II) and Cr(VI) removal after four cycles. The electrostatic attraction and coordination covalent bonds were responsible for the adsorption process.

Single-drop electrodeposition of nanoneedle-like bismuth on disposable graphene electrode for on-site electrochemical detection of cadmium and lead.

A novel cost-effective disposable porous graphene electrode (P-GE) modified with bismuth nanoneedles (nano-BiNDs) is proposed as a "mercury-free" sensor for detecting heavy metals through smartphone-assisted electrochemical sensing. The P-GE was fabricated using screen-printing. Nano-BiNDs were generated on the P-GE by potentiostatic electrodeposition. Using an optimal potential of -1.20 V (vs. pseudo-Ag/AgCl) and a deposition time of 200 s, the nano-BiNDs had an average length and width of 189 ± 5 nm and 20 ± 2 nm, respectively. The analytical performances of the fabricated sensing platform were demonstrated by detecting Cd2+ and Pb2+ using square-wave anodic stripping voltammetry (SWASV) under optimized conditions. In the optimal conditions, the fabricated sensor exhibited sharp, well-defined stripping peaks for Cd2+ and Pb2+ with excellent peak-to-peak separation. The linear detection ranges were from 0.01 to 50 µg mL-1 for Cd2+ and 0.006-50 µg mL-1 for Pb2+. The detection limits for Cd2+ and Pb2+ were 3.51 and 2.10 ng mL-1, respectively. The developed portable sensor demonstrated high sensitivity, good repeatability, reproducibility, and anti-interference properties. The proposed portable sensor quantified Cd2+ and Pb2+ in commercial seaweed products with good accuracy, consistent with the results obtained using the standard ICP-OES method.

Advanced Insights on MXenes: Categories, Properties, Synthesis, and Applications in Alkali Metal Ion Batteries.

The development and optimization of promising anode material for next-generation alkali metal ion batteries are significant for clean energy evolution. 2D MXenes have drawn extensive attention in electrochemical energy storage applications, due to their multiple advantages including excellent conductivity, robust mechanical properties, hydrophilicity of its functional terminations, and outstanding electrochemical storage capability. In this review, the categories, properties, and synthesis methods of MXenes are first outlined. Furthermore, the latest research and progress of MXenes and their composites in alkali metal ion storage are also summarized comprehensively. A special emphasis is placed on MXenes and their hybrids, ranging from material design and fabrication to fundamental understanding of the alkali ion storage mechanisms to battery performance optimization strategies. Lastly, the challenges and personal perspectives of the future research of MXenes and their composites for energy storage are presented.