Comparative performance of liquid chromatography and spectrophotometry in determining metformin hydrochloride within pharmaceutical formulations.

The present study compared the performance of Ultra-high performance liquid chromatography (UHPLC) and UV-Vis spectrophotometry for the quantification of metformin hydrochloride in five commercially available metformin hydrochloride products with different strengths. The metformin hydrochloride was measured in the UHPLC with a mobile phase consisting of a mixture of 0.05 M phosphate buffer solution and methanol (35:65, v/v) with a pH of 3.6. Metformin hydrochloride was determined spectrophotometrically at 234 nm using a mixture of methanol and water as a blank. The methods' linearity for metformin hydrochloride was within the concentration range of (2.5-40 µg/ml) in both techniques. The validation process encompassed assessments of specificity, selectivity, linearity, accuracy, precision, the lower limit of quantification (LLOQ), the lower limit of detection (LLOD), robustness, and system suitability. For the UHPLC validation method, the repeatability and reproducibility (expressed as relative standard deviation) were less than 1.578 and 2.718 %, respectively. The LLOQ for metformin hydrochloride was 0.625 µg/ml, and the LLOD was 0.156 µg/ml. For the UV-Vis spectrophotometric validation method, the repeatability and reproducibility (stated as relative standard deviation) were less than 3.773 and 1.988 %, respectively. The percentage recovery results for the five brands of metformin hydrochloride tablets were (98-101 %) and (92-104 %) for the UHPLC and UV-Vis spectrophotometric methods, respectively. In conclusion, the described methodologies were successfully employed for the quantitative analysis of metformin hydrochloride in different pharmaceutical tablet products.

Acupotomy combined with metformin hydrochloride tablet for type 2 diabetes mellitus and its effect on serum inflammatory factors. / é’ˆåˆ€è”åˆç›é ¸äºŒç”²åŒèƒç‰‡æ²»ç–—2åž‹ç³–å°¿ç— çš„ä¸´åºŠç–—æ•ˆåŠå¯¹è¡€æ¸ ç‚Žæ€§å› å­å«é‡çš„å½±å“.

OBJECTIVES: To observe the clinical efficacy of acupotomy combined with metformin hydrochloride tablet for type 2 diabetes mellitus (T2DM) and its effect on serum levels of inflammatory factors. METHODS: A total of 68 patients with T2DM were randomized into an acupotomy group (34 cases, 2 cases dropped out) and a western medication group (34 cases, 2 cases dropped out). Metformin hydrochloride tablet was given orally in the western medication group, 0.5-1 g each time, twice a day, for continuous 8 weeks. On the basis of the treatment in the western medication group, acupotomy was applied at bilateral Geshu (BL 17), Weiwanxiashu (EX-B 3), Ganshu (BL 18) in the acupotomy group, once a week for continuous 8 weeks. Before and after treatment, in the two groups, blood glucose (fasting blood glucose [FBG], 2-hour plasma glucose [2 h PG] and glycosylated hemoglobin [HbA1c]), TCM syndrome score, blood lipids (total cholesterol [TC], triglyceride [TG], low density lipoprotein cholesterol [LDL-C] and high density lipoprotein cholesterol [HDL-C]), insulin (fasting insulin [FINS] and 2-hour insulin [2 h INS]), C-peptide indexes (fasting C-peptide [FC-P] and 2-hour C-peptide [2 h C-P]), dosage of metformin hydrochloride tablet and diabetes specific quality of life (DSQL) score were observed, the serum levels of tumor necrosis factor (TNF)-α, interleukin (IL)-6 and IL-17 were measured by ELISA. RESULTS: After treatment, the FBG, 2 h PG, HbA1c, TCM syndrome scores, TC, TG, LDL-C, FINS, 2 h INS, FC-P, 2 h C-P, DSQL scores as well as the serum levels of TNF-α, IL-6, IL-17 were decreased compared with those before treatment (P<0.01), HDL-C was increased compared with that before treatment (P<0.01) in the two groups; the dosage of metformin hydrochloride tablet was decreased compared with that before treatment in the acupotomy group (P<0.01). After treatment, in the acupotomy group, the FBG, HbA1c, TCM syndrome score, TC, TG, LDL-C, FINS, 2 h INS, FC-P, 2 h C-P, dosage of metformin hydrochloride tablet, DSQL score as well as the serum level of TNF-α were lower than those in the western medication group (P<0.05). CONCLUSIONS: Acupotomy combined with metformin hydrochloride tablet can improve the blood glucose, clinical symptoms and quality of life in patients with T2DM, its mechanism may be related to the regulation of inflammatory reaction.

Development of Biotinylated Liposomes Encapsulating Metformin for Therapeutic Targeting of Inflammation-Based Diseases.

Inflammation is a physiological response to a damaging stimulus but sometimes can be the cause of the onset of neurodegenerative diseases, atherosclerosis, and cancer. These pathologies are characterized by the overexpression of inflammatory markers like endothelial adhesion molecules, such as Vascular Cell Adhesion Molecule-1 (VCAM-1). In the present work, the development of liposomes for therapeutic targeted delivery to inflamed endothelia is described. The idea is to exploit a three-step pretargeting system based on the biotin-avidin high-affinity interaction: the first step involves a previously described biotin derivative bearing a VCAM-1 binding peptide; in the second step, the avidin derivative NeutrAvidinTM, which strongly binds to the biotin moiety, is injected; the final step is the administration of biotinylated liposomes that would bind to NeutravidinTM immobilized onto VCAM-1 overexpressing endothelium. Stealth biotinylated liposomes, prepared via the thin film hydration method followed by extrusion and purification via size exclusion chromatography, have been thoroughly characterized for their chemico-physical and morphological features and loaded with metformin hydrochloride, a potential anti-inflammatory agent. The three-step system, tested in vitro on different cell lines via confocal microscopy, FACS analysis and metformin uptake, has proved its suitability for therapeutic applications.

Bioequivalence and Safety Assessment of 2 Formulations of Low-Dose Metformin Hydrochloride under Fasting Conditions in Healthy Chinese Participants: A Randomized Phase 1 Clinical Trial.

The incidence of type 2 diabetes is high, and the existing metformin hydrochloride (MH) tablets of 250 mg cannot meet the demands of the Chinese drug market. This study aimed to evaluate the bioequivalence and safety of generic formulations of MH tablets (test formulation [T], 250 mg/tablet) and innovative products (reference formulation [R], 250 mg/tablet) under fasting conditions. This was an open-label, single-dose, 2-period, 2-sequence crossover, single-center, randomized phase I clinical trial. T and R were considered bioequivalent if the adjusted geometric mean ratios (GMRs) and 90% confidence intervals of the area under the curve (AUC) and maximum concentration (Cmax ) were within the range of 0.8-1.25. Thirty-five participants completed the trial. The T/R adjusted GMRs (95.7% for Cmax , 98.7% for AUC0→t , 98.8% for AUC0→∞ ) were within the acceptable bioequivalence range of 80%-125%. No serious adverse events or suspected or unexpected serious adverse reactions occurred during this trial. The study findings confirmed that generic MH is a well-tolerated and bioequivalent alternative to innovative products under fasting conditions in healthy Chinese participants. (www.chinadrugtrials.org.cn; registration no. CTR20190356).

In vitro release and bioaccessibility of oral solid preparations in a dynamic gastrointestinal system simulating fasted and fed states: A case study of metformin hydrochloride tablets.

Food and formulation characteristics are crucial factors affecting the gastrointestinal release and absorption kinetics of oral solid preparations. In the present study, the dynamic continuous release and bioaccessibility of metformin hydrochloride immediate-release (IR) and sustained-release (SR) tablets were investigated in the dynamic human stomach-intestine (DHSI-IV) system simulating fasted and fed states in healthy adults. Both tablet formulations (particularly IR tablet) exhibited a postponed release in the fed state compared to the fasted state. Correspondingly, the bioaccessible fraction of metformin from IR tablets in the presence of high-fat meal was significantly reduced to 76.2 % of the fasted state. However, the in vitro bioaccessibility was less impaired by food for SR tablets with a fed/fasted ratio of 95.5 %. A convolution-based approach was used to convert in vitro bioaccessibility results to plasma concentration data. The predicted plasma concentration curve showed good agreement with human data in terms of pharmacokinetic (PK) parameters. In the fasted state, the predicted Cmax, Tmax and AUC0-24h of IR tablets were 943.9 ± 25.7 ng/mL, 2.0 ± 0.4 h and 7090.7 ± 112.0 ng.h/mL, respectively, mirroring values observed in healthy subjects. Overall, the DHSI-IV system has demonstrated potential to assess and predict the impact of meal intake on the in vivo release and absorption behaviors of oral solid preparations.

Evaluating the application of an arabinoxylan-rich fraction from brewers' spent grain as a release modifier of drugs.

This study evaluated the possible use of a fraction of brewers' spent grain rich in arabinoxylans (BSG-AX) as an excipient that modifies the release of class III drugs (Biopharmaceutics Classification System), by determining the release profile of metformin hydrochloride (MH), in a water medium. The cumulative percentage of MH release showed the best linear fit when modeled with the cumulative distribution function (CDF) of the Weibull distribution (R2 = 0.993 ± 0.001). According to the Korsmeyer-Peppas model, the first stage of MH release is regulated by a super case-II transport mechanism controlled by the expansion and relaxation of BSG-AX. Finally, with the Hixson-Crowell model, a release rate (kHC) of 0.350 ± 0.026 h-13 was obtained (R2 = 0.996 ± 0.007). BSG-AX constitutes a suitable material for producing prolonged drug release vehicles; however, additional research is required to provide a better encapsulation of the active ingredients to ensure their optimal applicability and performance.

In Vitro and In Vivo Evaluation of Metformin Hydrochloride Hydrogels Developed with Experimental Design in the Treatment of Burns.

Burns alter the normal skin barrier and affect various host defense processes that help prevent infections. An ineffective repair process can lead to serious damage, such as the onset of an infection or skin loss, which can then harm the surrounding tissues and ultimately the entire organism. This study aims to prepare in situ gels containing metformin hydrochloride, a compound known for its wound healing properties. To achieve this, in situ gels were prepared using three different gelling agents (Poloxamer 407®, Carbopol 934®, and sodium carboxymethyl cellulose (Na-CMC)) and three different concentrations of metformin hydrochloride (4 mg/g, 6 mg/g, and 8 mg/g), which were optimized through experimental design. Metformin concentration and gelling agent type were independent variables, and the loaded amount and the percentage of metformin released after 150 min were chosen as dependent variables in the optimization process. After determining the optimum values of the dependent variables according to the ANOVA analysis results, in vivo studies were conducted with optimized hydrogel formulations. Two groups, each consisting of seven Wistar rats with a burn model, were treated with metformin-poloxamer 407® gels at doses of 4 mg/g and 8 mg/g for 29 days. The results were then compared to untreated and placebo gel groups. Rats treated with in situ Poloxamer 407® hydrogels containing metformin hydrochloride showed a significant reduction in the size of the burned area after 29 days of treatment. However, for a comprehensive understanding of the wound healing mechanism, further studies such as immuno-histochemical and cell culture studies are needed.

Effect of antidiabetic drug metformin hydrochloride on micellization behavior of cetylpyridinium bromide in aqueous solution.

Herein, the interaction of an antidiabetic drug, metformin hydrochloride (MHCl), and a cationic surfactant, cetylpyridinium bromide (CPB) is investigated in an aqueous medium. The critical micellar concentration (CMC) of CPB is estimated through conductivity experiments and found to be reduced on adding MHCl and further decreased in the presence of NaCl. The reduced CMC is attributed to the solubilization of MHCl by CPB through micellization and the micellization is found to be thermodynamically spontaneous that experiences an augmentation in the presence of NaCl. This is identified from the negative value of standard free energy (ΔG0m). The higher negative value of ΔG0m (-55.41 kJ mol-1) for CPB + MHCl + NaCl than CPB (-37.89 kJ mol-1) and CPB + MHCl (-34.08 kJ mol-1) is suggestive of the above phenomenon. The positive values of ΔS0m in all three cases confirm that the micellization is entropy driven. The binding of MHCl on CPB is quantified by estimating binding constant using the Benesi-Hildebrand (B-H) plot through UV-visible spectral methods. The binding constant values were calculated to be 2.70 M-1 for CPB + MHCl + NaCl compared to 1.258 M-1 for CPB + MHCl predicting a favoring of micellization in the presence of NaCl which is higher than that in the presence of co-solvents. The molecular interaction of MHCl and CPB is justified using FT-IR and NMR techniques. The surface properties of drug surfactant interactions are assessed using SEM techniques. The point of interaction between the drug and surfactant is visualized through the molecular docking approach. The results suggest that CPB would be an effective solubilizer for developing MHCl drug formulations.Communicated by Ramaswamy H. Sarma.

PLGA-based microspheres loaded with metformin hydrochloride: Modified double emulsion method preparation, optimization, characterization, and in vitro evaluation.

The modified solvent removal method was used to encapsulate metformin hydrochloride (MH) within poly(lactic-co-glycolic acid) (PLGA) microspheres. The study investigated the effect of varying polymer concentrations on the loading and release of the drug from the microspheres. The encapsulation process involved using a double emulsion method, resulting in microspheres with particle diameters ranging from approximately 4.4µm to 2.7µm. The study achieved high encapsulation efficiencies, ranging from 81% to 90%, with drug loadings ranging from 18% to 11%. The release of the drug from the microspheres followed a biphasic pattern over 24 days, with nearly complete release by the end of the study period. Fourier transform infrared spectroscopy (FTIR) analysis indicated that there were no notable differences between PLGA and MH-loaded microspheres, suggesting minimal interactions between MH and PLGA. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) techniques were used to investigate the state of the MH within the microspheres. The results suggested that the MH was dispersed at a molecular level within the spheres and existed in an amorphous state. This amorphous state of the drug may explain the slow and prolonged release observed in the study.

Bioderived cellulose fibre-guar gum grafted poly (N, N'-dimethylacrylamide) polymer network for controlled release of metformin hydrochloride.

An interpenetrating polymer network (IPN) of areca cellulose and guar gum grafted with poly (N, N'-dimethylacrylamide) was made by microwave irradiation technique. N, N-methylenebisacrylamide (MBA) was used as the crosslinking agent. The network polymer was characterised using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Powder X-ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM). The chemical interaction between the drug and the polymer was studied using Differential Scanning Calorimetry (DSC). The swelling of the gel was measured under different pH conditions and the swelling parameters were evaluated. The gel was loaded with an anti-diabetic drug, Metformin Hydrochloride, and the in vitro drug release was studied in gastric and intestinal conditions. The results indicated complete release of the drug in 6 h under pH 1.2 and in 10 h under pH 7.4. The kinetic analysis of release data indicated the drug release to follow Higuchi's model. The release exponent "n" of Korsmeyer-Peppas model was found to be >0.45 indicating the drug diffusion to be a non-Fickian process.

Metformin Hydrochloride Significantly Inhibits Rotavirus Infection in Caco2 Cell Line, Intestinal Organoids, and Mice.

Rotavirus is one of the main pathogens that causes severe diarrhea in children under the age of 5, primarily infecting the enterocytes of the small intestine. Currently, there are no specific drugs available for oral rehydration and antiviral therapy targeting rotavirus. However, metformin hydrochloride, a drug known for its antiviral properties, shows promise as it accumulates in the small intestine and modulates the intestinal microbiota. Therefore, we formulated a hypothesis that metformin hydrochloride could inhibit rotavirus replication in the intestine. To validate the anti-rotavirus effect of metformin hydrochloride, we conducted infection experiments using different models, ranging from in vitro cells and organoids to small intestines in vivo. The findings indicate that a concentration of 0.5 mM metformin hydrochloride significantly inhibits the expression of rotavirus mRNA and protein in Caco-2 cells, small intestinal organoids, and suckling mice models. Rotavirus infections lead to noticeable pathological changes, but treatment with metformin has been observed to mitigate the lesions caused by rotavirus infection in the treated group. Our study establishes that metformin hydrochloride can inhibit rotavirus replication, while also affirming the reliability of organoids as a virus model for in vitro research.

Metformin HCl-loaded transethosomal gel; development, characterization, and antidiabetic potential evaluation in the diabetes-induced rat model.

Herein we designed, optimized, and characterized the Metformin Hydrochloride Transethosomes (MTF-TES) and incorporate them into Chitosan gel to develop Metformin Hydrochloride loaded Transethosomal gel (MTF-TES gel) that provides a sustained release, improved transdermal flux and improved antidiabetic response of MTF. Design Expert® software (Ver. 12, Stat-Ease, USA) was applied for the statistical optimization of MTF-TES. The formulation with Mean Particle Size Distribution (MPSD) of 165.4 ± 2.3 nm, Zeta Potential (ZP) of -21.2 ± 1.9 mV, Polydispersity Index (PDI) of 0.169 ± 0.033, and MTF percent Entrapment Efficiency (%EE) of 89.76 ± 4.12 was considered to be optimized. To check the chemical incompatibility among the MTF and other formulation components, Fourier Transform Infrared (FTIR) spectroscopy was performed and demonstrated with no chemical interaction. Surface morphology, uniformity, and segregation were evaluated through Transmission Electron Microscopy (TEM). It was revealed that the nanoparticles were spherical and round in form with intact borders. The fabricated MTF-TES has shown sustained release followed by a more pronounced effect in MTF-TES gel as compared to the plain MTF solution (MTFS) at a pH of 7.4. The MTF-TES has shown enhanced permeation followed by MTF-TES gel as compared to the MTFS at a pH of 7.4. In vivo antidiabetic assay was performed and results have shown improved antidiabetic potential of the MTF-TES gel, in contrast to MTF-gel. Conclusively, MTF-TES is a promising anti-diabetic candidate for transdermal drug delivery that can provide sustained MTF release and enhanced antidiabetic effect.

Interaction of antidiabetic formulation with nanoplastics and its binary influence on plasma protein.

Nanoplastics exposure to humans becomes inevitable due to its prevalence and permanence. Adsorption of emerging pollutant metformin hydrochloride (Met-HCl) -antidiabetic drug, on polystyrene nanoplastics (PSNPs) and influence on plasma protein binding was investigated. Fluorescence studies were carried out for human serum albumin (HSA) binding. Adsorption follows pseudo-second-order kinetics, intraparticle-diffusion, and Langmuir isotherm, undergoing both physisorption and chemisorption which was validated by FE-SEM, FTIR, and HRMS measurements. Complex, experiences static quenching mechanism by hydrogen bonding and VanderWaals force of attraction to HSA. FTIR confirms the secondary structural alteration of HSA. Since Met-HCl covers the NPs' surface, NPs' affinity for HSA is reduced and they might reach the target organs of Met-HCl, disrupt antidiabetic mechanisms and cause far-reaching implications. Results from molecular docking and simulation studies backed up these results as hydrophobic and hydrogen bonds dominate the binding process of the HSA-Met-HCl-PSNPs complex. This work will aid in understanding of the toxico-kinetics/dynamics of binary contaminants.

Ground and Excited State Dipole Moments of Metformin Hydrochloride using Solvatochromic Effects and Density Functional Theory.

In this research, the ground (µg) and excited (µe) state dipole moments of metformin hydrochlorides were determined using Lippert-Mataga, Bakhshiev's, Kawski-Chamma-Viallet, and Reichardt models from fluorescence emission and UV-Vis absorption spectra in various solvents. From solvatochromic effects the calculated excited (µe ) dipole moment of metformin hydrochloride were, 8.55 D, 8.34 D, 6.08 D, and 6.40 D using the Lippert-Mataga, Bakhshiev's, Kawski-Chamma-Viallet and Reichardt models respectively. The results also indicated that the dipole moment at the ground state is smaller than the excited state. This is due to solvent polarity having a stronger effect on fluorescence emission than absorption spectra. Similarly, from density functional theory, the calculated ground and excited states dipole moments of metformin hydrochloride using (DFT-B3LYP- 3-21+G*(µg = 10.02 D and µe = 11.94 D), DFT-B3LYP- 6-31+G (d, p) (µg = 8.44 D and µe = 10.87 D), and DFT-B3LYP- 6-311+G (d, p) (µg = 8.24 D and µe = 18.74 D)) analyzed by Gaussian 09W. From the optimized geometry of the molecule, the HOMO-LUMO energy band gap of metformin hydrochloride were computed using DFT [DFT-B3LYP- 3-21+G*(5.51 eV), DFT-B3LYP- 6-31+G (d, p) (5.66 eV), and DFT-B3LYP- 6-311+G (d, p) (5.70 eV)] respectively.

Valuation of environmental influence of recently invented high-performance liquid chromatographic method for hypoglycemic mixtures of gliflozins and metformin in the presence of melamine impurities: Application of molecular modeling simulation approach.

Molecular modeling is the science of representing molecular structures numerically and simulating their behavior with the equations of quantum and classical physics. Coupling molecular modeling and simulation with chromatographic resolution for pharmaceutical products constitutes a new technique in pharmaceutical analysis. An innovative high-performance liquid chromatographic (HPLC) methodology was developed for the quantification of metformin hydrochloride (MET), empagliflozin (EMP), and canagliflozin (CAN) in bulk, laboratory-developed combinations, pharmaceutical tablets, and in the presence of melamine. Chromatographic separation was accomplished using a Symmetry column with 0.03 M potassium dihydrogen phosphate buffer and 0.02 M heptane sulphonic acid: acetonitrile as the mobile phase. Molecular modeling using molecular operating environment software was applied to properly select the stationary phase suitable for the developed HPLC method. Additionally, molecular modeling estimates and validates binding between the studied analytes and the stationary phase to clarify and explain the chromatographic separation and elution order. In accordance with the International Conference of Harmonization recommendations, the method was validated in terms of linearity, accuracy, precision, and selectivity. The linearity ranges (µg/ml) were 200-1500 (MET), 2-15 (EMP), and 20-150 (CAN) and the limit of detection values were in the ranges of 0.17-54.58 µg/ml. Analysis of pharmaceutical tablets using the suggested approach yielded satisfactory outcomes. As a result, it might be used in quality control laboratories to analyze the aforementioned medications.

Influence of talc and hydrogenated castor oil on the dissolution behavior of metformin-loaded pellets with acrylic-based sustained release coating.

Multi-unit pellet system (MUPS) is of great interest as it is amenable to customization. MUPS comprises multi-particulates, usually as pellets or spheroids, which can be coated with diffusion barrier coatings. One commonly used diffusion barrier coating is the methacrylic acid copolymer, which can be used as a taste masking, enteric or sustained release polymer. While the versatility of methacrylic acid copolymers makes them pliable for pellet coating, there are impediments associated with their use. Additives commonly required with this polymer, including plasticizer and anti-adherent, have been shown to weaken the film strength. The objective of this study was to investigate the impact of osmotic pressure within the core on the sustained release coat integrity and functionality. Hydrogenated castor oil (HCO) was chosen as the additive to be studied. Metformin-loaded pellets, prepared via extrusion-spheronization, were coated with ethyl acrylate and methyl methacrylate copolymer (Eudragit RS 30 D) containing talc, talc-HCO, or HCO to different coat thicknesses. Drug release was investigated using the USP dissolution apparatus 2 and an ultraviolet imager. The swelling of the pellets when wetted was monitored by video imaging through a microscope. When coated to 7.5 % coat weight gain, coats with HCO slowed down drug release more than the other pellets. The pellets also swelled the most, which suggests that they were more resistant to the osmotic pressure exerted by metformin. For drugs which exert high osmotic pressure, HCO can serve as an efficient alternative to talc in the preparation of methacrylic acid copolymer coatings.

[Comparison of therapeutic effect of metformin hydrochloride/vildagliptin and liraglutide on type 2 diabetes mellitus in obese patients].

OBJECTIVE: To evaluate the therapeutic effects of two therapeutic strategies based on metformin hydrochloride/vildagliptin and liraglutide on type 2 diabetes mellitus (T2DM) in obese patients. METHODS: We retrospectively collected the clinical data of 107 obese patients (BMI>25 kg/m2) with T2DM treated in Second Affiliated Hospital of Wannan Medical College (Wuhu, China) during 2019-2021, including 53 patients treated continuously with metformin hydrochloride/vildagliptin and 54 with liraglutide for 3 months. The changes in BMI, waist circumference, fasting blood glucose (FBG), postprandial blood glucose, HbA1C, fasting C-peptide, postprandial C-peptide, fasting insulin and postprandial insulin of the patients after treatment were compared between the two groups. RESULTS: In both of the groups, the patients all showed significant reductions of BMI, waist circumference, FBG, postprandial blood glucose and HbA1C (all P < 0.05) with improved fasting and postprandial C-peptide levels after the treatments (P < 0.05). The two treatment regimens showed comparable blood glucoselowering effects, but liraglutide produced better effect in reducing waist circumference (P < 0.01). Neither of two regimens obviously affected insulin level of the patients (P>0.05). CONCLUSION: Both metformin hydrochloride/vildagliptin and liraglutide have good therapeutic effects on T2DM in obese patients and can achieve good blood glucose and weight control, but liraglutide has a better effect for weight control.

Metformin ameliorates calcium oxalate crystallization and stone formation by activating the Nrf2/HO-1 signaling pathway: Two birds with one stone.

Deposition of calcium oxalate (CaOx) crystals and oxidative stress-induced injury of renal tubular epithelial cell are the primary pathogenic factors of nephrolithiasis. In this study we investigated the beneficial effects of metformin hydrochloride (MH) against nephrolithiasis and explored the underlying molecular mechanism. Our results demonstrated that MH inhibited the formation of CaOx crystals and promoted the transformation of thermodynamically stable CaOx monohydrate (COM) to more unstable CaOx dihydrate (COD). MH treatment effectively ameliorated oxalate-induced oxidative injury and mitochondrial damage in renal tubular cells and reduced CaOx crystal deposition in rat kidneys. MH also attenuated oxidative stress by lowering MDA level and enhancing SOD activity in HK-2 and NRK-52E cells and in a rat model of nephrolithiasis. In both HK-2 and NRK-52E cells, COM exposure significantlylowered the expressions of HO-1 and Nrf2, which was rescued by MH treatment even in the presence of Nrf2 and HO-1 inhibitors. In rats with nephrolithiasis, MH treatment significantly rescued the down-regulation of the mRNA and protein expression of Nrf2 and HO-1 in the kidneys. These results demonstrate that MH can alleviate CaOx crystal deposition and kidney tissue injury in rats with nephrolithiasis by suppressing oxidative stress and activating the Nrf2/HO-1 signaling pathway, suggesting the potential value of MH in the treatment of nephrolithiasis.

Preparation and characterisation of self-emulsifying drug delivery system (SEDDS) for enhancing oral bioavailability of metformin hydrochloride using hydrophobic ion pairing complexation.

AIM: The aim of this study was preparation of a self-emulsifying drug delivery system (SEEDS) containing metformin hydrochloride. METHODS: Hydrophobic ion paired complexes were prepared by electrostatic interaction between metformin and sodium lauryl sulphate (SLS). The nanodroplets were optimised using two-level full factorial methodology and their morphology were examined. In vitro release of metformin from SEDDS was evaluated in simulated gastric and intestinal fluids. Finally, the ex-vivo efficacy of the optimised formulation in enhancing the intestinal permeability of metformin was evaluated using non-everted intestinal sac. RESULTS: The data revealed that in weight ratio 1:4(metformin: SLS), the highest recovery was achieved. The physico-chemical properties of the optimised nano-droplets including size, polydispersity index (PdI), zeta potential, and loading efficiency (%) were 192.33 ± 9.9 nm, 0.275 ± 0.051; -1.52 mV, and 93.75 ± 0.77% (w/w), respectively. CONCLUSIONS: The data obtained from the intestinal transport study demonstrated that SEDDS can significantly enhance the oral permeability of the compound.

Influence of permeability enhancers on the paracellular permeability of metformin hydrochloride and furosemide across Caco-2 cells.

Permeability enhancers can affect absorption of paracellularly transported drugs. This study aims to evaluate effects of permeability enhancers (chitosan, methyl-ß -cyclodextrin, sodium caprate, sodium lauryl sulfate, etc.) on the permeability of paracellularly absorbed furosemide and metformin hydrochloride. Methyl thiazole tetrazolium bromide test was carried out to determine the drug concentrations in permeability study. Trans-epithelial electrical resistance (TEER) values determined to assess the integrity of tight junctions. Permeability enhancers were applied at different concentrations alone, in dual/triple combinations. Permeability was determined using human colorectal adenocarcinoma (Caco-2) cells (TEER > 400 Ω·cm2). Permeability enhancers have no significant effect (<2-fold; p > 0.05) on the permeability of furosemide (1.80 × 10-5 ± 4.55 × 10-7 cm/s); however, metformin permeability (1.36 × 10-5 ± 1.25 × 10-6 cm/s) increased significantly (p < 0.05) with 0.3% and 0.5% (w/v) chitosan (2.0- and 2.7-fold, respectively), 1% methyl-ß -cyclodextrin (w/v) (3.5-fold), 10 and 20 µmol/L sodium caprate (2.2- and 2.8-fold, respectively), and 0.012% sodium lauryl sulfate (w/v) (1.9-fold). Furosemide permeability increased significantly (p < 0.05) with chitosan-sodium lauryl sulfate combination (1.7-fold), and all triple combinations (1.4- to 1.9-fold). Chitosan containing dual/triple combinations resulted in significant increase (p < 0.05) in metformin permeability (1.7 to 2.8-fold). All results indicated that absorption of furosemide and metformin can be improved by the combination of permeability enhancers. Therefore, it can be evaluated for the formulation of development strategies containing furosemide and metformin by the pharmaceutical industry.