Microstructural analysis applied to carbonate matrix acidizing: An overview and a case study.

Carbonate formations constitute the primary source of hydrocarbon reservoirs worldwide, highlighting the importance of gaining a deeper understanding of matrix acidizing phenomena to enhance well productivity in these formations. Microstructural analysis of acidified cores is a key method to assess acidizing systems in carbonate rock samples. X-ray computed microtomography (Micro-CT) has significantly contributed to this field, primarily focusing on the qualitative and quantitative characterization of the profiles of carbonate mineral dissolution, also known as wormholes, created during matrix acidizing. This non-destructive evaluation technique allows the internal analysis of a sample without altering its internal structure or chemical composition. This work focuses on a comprehensive review of the research studies and the main applications of micro-CT for evaluating and characterizing matrix acidizing in carbonates. First, an overview of the fundamentals of micro-CT and acid stimulation in carbonates is provided. Next, the applications of micro-CT are discussed and grouped into microstructural characteristics of wormholes, dynamic in-situ experiments, and pore-scale modeling topics. A case study is presented with a methodology based on micro-CT analysis for matrix acidizing. Finally, future work and current challenges, such as 4D CT and CT-based acidizing models, are discussed.

Comparative Evaluation of Supplementary Cleaning Techniques for Removal of Bio-C Sealer and AH-Plus from Oval Root Canals: A Micro-CT Analysis.

Introduction: This study aimed to compare the effectiveness of two endodontic cleaning techniques, passive ultrasonic irrigation (PUI) and the XP-endo Finisher R (XPR) system, in removing residual filling material during endodontic retreatment procedures. Materials and Methods: Forty mandibular premolars with oval canals were divided into four groups based on the sealer used (AH-Plus or Bio-C Sealer) and the cleaning technique employed (PUI or XPR). To ensure uniformity of canal volume among groups, initial micro-CT scans were conducted. The canals were instrumented, filled, and then re-instrumented before undergoing either PUI or XPR cleaning techniques. Residual filling material volumes were assessed through micro-CT scans, and statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Following instrumentation, there was no significant difference in residual filling material volumes between AH-Plus and Bio-C Sealer groups (1.35 mm3and 1.02 mm3, respectively; P>0.05). However, after supplementary cleaning techniques, XPR-cleaned specimens exhibited significantly less residual material compared to PUI-cleaned specimens (0.01 mm3 and 0.29 mm3 for Bio-C Sealer, and 0.07 mm3 and. 0.30 mm3 for AH-Plus, P<0.05). Conclusion: The XPR system was found to be more effective than PUI in removing residual filling material from Bio-C Sealer-filled root canals. This highlights its potential as a useful supplementary cleaning technique in endodontic retreatment procedures.

Effect of estrogen depression on alveolar bone microarchitecture and periodontal ligament cells during orthodontic movement.

This study aimed to evaluate the effects of the estrogen depression during orthodontic tooth movement on alveolar bone microarchitecture and periodontal ligament. Female Wistar rats were divided into two groups, one consisting of non-ovariectomized animals subjected to orthodontic tooth movement, and one comprising ovariectomized animals subjected to orthodontic tooth movement. Micro-CT assessment of bone volume to total volume (BV/TV), total porosity, trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) in the alveolar bone of the orthodontically moved tooth was performed. Histomorphometric analyses were made in the periodontal ligament, and immunoexpression of RANK, RANKL, OPG, and TUNEL were quantified. Orthodontic tooth movement in the group of ovariectomized rats was faster than in non-ovariectomized animals. The alveolar bone area showed lower values of BV/TV and trabecular thickness, and higher bone porosity and trabeculae numbers in the ovariectomized rats. Histological analyses in the ovariectomized group revealed an increase in collagen fibers in the periodontal ligament. The apoptotic cell counts in the periodontal ligament were higher in the group of ovariectomized rats than in the sham-operated rats. Ovariectomy resulted in an increase in tooth movement and alteration of the alveolar bone microstructure in the first 7 day of orthodontic tooth movement, and in the presence of apoptotic cells in the periodontal ligament.

Incorporación de Tecnología Tridimensional mediante Tomografía Microcomputarizada en el Estudio de la Anatomía de Salmónidos: Una Evaluación de Utilidad / Integration of Three-Dimensional Technology through Microcomputed Tomography in the Study of Salmonid Anatomy: A Utility Evaluation

Los salmónidos, durante su desarrollo, pueden experimentar ocasionalmente deformaciones esqueléticas. Para su diagnóstico se emplean diversas metodologías, entre las que se incluyen radiografías, técnicas histológicas, diafanización con tinciones de alizarina y azul de alcián, así como el uso del microscopio electrónico de barrido (SEM), cada una con sus inherentes ventajas y desventajas. Este estudio tuvo como finalidad evaluar y comparar la eficacia de la tomografía microcomputarizada (Micro-CT) para el análisis anatómico, reconstruyendo tridimensionalmente las imágenes y contrastándolas con los resultados obtenidos mediante la técnica de diafanización. Se analizaron las aletas caudales de cinco ejemplares de salmón Oncorhynchus kisutch: dos sujetos a diafanización y tres procesados para análisis mediante Micro-CT utilizando el equipo BRUKER SkyScan 1272. La técnica de Micro-CT demostró superioridad en la resolución de las estructuras óseas, facilitando una exploración detallada de las variaciones morfológicas y la distribución de la densidad mineral. Este enfoque permitió identificar anomalías en la morfología y crecimiento de las últimas vértebras y lepidotriquias dorsales, así como una densidad incrementada en lepidotriquias dorsales malformadas. La mayor resolución proporcionada por la Micro-CT no solo potencia nuestra comprensión de la ontogenia piscícola y su adaptación a ambientes diversos, sino que además inaugura perspectivas innovadoras para el estudio de la evolución de las estrategias locomotoras y las respuestas adaptativas frente a cambios ambientales a través del tiempo.

SUMMARY: During their development, some species of salmonids may occasionally experience skeletal deformations. Several methodologies are currently being used for the diagnosis of such malformations, among which X-rays, histological techniques, diaphanization coupled either with Alizarin Red or Alcian Blue stains, as well as Scanning Electron Microscopy (SEM) can be mentioned. Each one of those methods presents inherent advantages and disadvantages. The purpose of this study was twofold: Firstly, to evaluate and compare the effectiveness of microcomputed tomography (Micro-CT) technology for anatomical analysis, three-dimensionally reconstructing the obtained images; and secondly, to contrast those images with the results obtained through the diaphanization technique. The caudal fins of five specimens of the Oncorhynchus kisutch salmon were analyzed: Two specimens were subjected to diaphanization and three were processed for Micro-CT analysis, using the BRUKER SkyScan 1272 equipment. The Micro-CT technology demonstrated superiority in the resolution of bone structures, facilitating a detailed exploration of morphological variations, as well as the distribution of mineral density. This experimental approach allowed us to identify anomalies in the morphology and growth of the last vertebrae and dorsal lepidotrichiae, as well as an increased mineral density in the malformed dorsal lepidotrichiae. The higher resolution provided by Micro-CT not only enhances our understanding of the fish ontogeny and its adaptation to diverse environments, but also opens innovative perspectives for the study of the evolution of locomotor strategies and adaptive responses to environmental changes.

Comparative osteology of the skull of cowbirds (Icteridae: Molothrus).

Detailed osteological descriptions of the craniomandibular complex of passerine birds are lacking for most species, limiting our understanding of their diversity and evolution. Cowbirds (genus Molothrus) are a small but widespread group of New World nine-primaried songbirds, well-known for their unique brooding parasitic behavior. However, detailed osteological data for cowbirds and other Icteridae are currently scarce and several features of their skulls remain undescribed or poorly known. To address this issue, a detailed comparative osteology of cowbird skulls is presented here for the first time based on data from x-ray microcomputed tomography, dry skeletal data, and multivariate analyses of linear morphometric data. Cowbird skulls offer some functional insights, with many finch-like features probably related to a seed-rich diet that distinguishes them from most other icterids. In addition, features previously overlooked in earlier studies might provide valuable phylogenetic information at different levels of passerine phylogeny (Passerida, Emberizoidea, Icteridae, and Agelaiinae), including some of the otic region and nasal septum. Comparisons among cowbirds show that there is substantial cranial variation within the genus, with M. oryzivorus being the most divergent cowbird species. Within the genus, distantly related species share similar overall skull morphology and proportions, but detailed osteological data allow species identification even in cases of strong convergence. Further efforts are warranted to furnish baseline data for future studies of this iconic group of Neotropical birds and to fully integrate it into phylogenetic comparative frameworks.

Exploring access cavity through non-carious cervical lesions: Impacts on instrumentation, obturation, and fracture resistance in mandibular incisors.

AIM: To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors. METHODOLOGY: Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%. RESULTS: Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008). CONCLUSIONS: CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

Effect of the filling technique on the filling removal from oval-shaped canals.

OBJECTIVES: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. METHODS: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). CONCLUSIONS: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. CLINICAL RELEVANCE: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.

Shaping ability of three heat-treated NiTi systems in Vertucci's type III root canals of mandibular incisors: An ex vivo study.

Introduction: The anatomical configuration classified as Vertucci's type III is described as the second most prevalent in mandibular incisors. Methods: Thirty-six Vertucci's type III mandibular incisors were evaluated by micro-computed tomography (micro-CT) and divided into 3 groups (n = 12) according to the root canal preparation protocol (HyFlex CM [HCM], HyFlex EDM [HEDM], and Sequence Rotary File [SRF]). The teeth were scanned before and after performing 0.25 mm and 0.40 mm apical diameter preparations. The canal volume, dentin thickness, percentage of accumulated debris and untouched canal areas, transportation, and centering ability were measured. The data were statistically analyzed by ANOVA, Tukey, Kruskal-Wallis, and Dunn tests (P < 0.05). Results: The volume increase was more evident in the apical third. After 0.40 mm preparation, the SRF system provided a higher reduction (P < 0.05) in dentin thickness on the buccal surface 1 mm from the apex. There was higher canal transportation in the bucco-lingual direction. The 0.40 mm apical preparation reduced the percentage of untouched canal areas. The apical third had the highest percentage of untouched canal areas. The cervical third had the lowest volume of accumulated debris. Conclusions: Increasing the apical preparation to a diameter of 0.40 mm with the HCM, HEDM, and SRF systems in Vertucci's type III root canals of mandibular incisors proved to be safe and effective, reducing untouched canal areas. Clinical relevance: Root flattening can be intense to the point of generating a root canal bifurcation. Despite the decrease in the root canal diameter, a greater enlargement of the apical region is necessary and safe.

Effects of increasing instrument size and taper on the disinfection and shaping of mandibular incisors.

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected. Instruments 30/0.03 (Group 1) and 30/0.05 (Group 2) were employed and a second sample was obtained. Canals were enlarged using instruments 40/0.03 and 40/0.05, respectively, and a third sample was collected. Final irrigation was performed, and sample S4 obtained. A final scan evaluated volume, surface area, unprepared areas, removed dentin and dentin thickness. Data were analysed using Student t-test, Mann-Whitney, Kruskal-Wallis and Dunn tests. A significant difference was observed between S1 and other time points (p < 0.05). Comparison between groups showed no differences in bacterial loads and in the percentage of microbial reduction (p > 0.05). Group 2 exhibited greater reduction in dentin thickness than group 1 in the mesial aspect of the root (p < 0.05). Instrument 30/0.03 might provide effective disinfection and safety during mandibular incisors canal preparation.

A comparative approach employing microCT for the analysis of Cenozoic foraminifera from the Brazilian carbonate equatorial platform.

Worldwide, some of the largest hydrocarbon reservoirs are located in tropical neritic carbonate deposits. Biostratigraphic and paleoenvironmental analyzes of these sedimentary records are often based on the study of foraminiferal assemblage. Foraminifera-based biozones are widely employed in the oil industry to support drilling processes that, alongside petrophysical prospecting, define interval favorable for exploiting hydrocarbon resources. Both scientific research and the petroleum industry, however, usually apply traditional petrographical and paleontological methods to analyze microfossil assemblages, especially for large benthic foraminifera. New, faster, and more accurate methods based on microCT analyzes have emerged as a valuable high-output tool to obtain high-resolution microfossil records for biostratigraphy and paleoenvironmental reconstructions. This method is also useful for the development of digital databases for artificial intelligence applications. MicroCT analyzes, therefore, lead to faster identification of foraminifera assemblage and support digital access to international foraminifera repositories and reference collections, introducing a new dimension in micropaleontological research.

Optical coherence tomography and gray scale digital analysis as noninvasive techniques for evaluating molar-incisor hypomineralization severity: A comparative study with microcomputed tomography.

Molar-incisor hypomineralization (MIH) is a qualitative defect of dental enamel characterized by demarcated opacities present in permanent first molars and other teeth. It is considered a major clinical challenge in dentistry because it makes affected teeth more susceptible to fractures and dental caries. Its diagnosis is mainly clinical and there are few technological resources that allow for a more accurate diagnosis, especially with respect to the depth of the defect in the dental enamel. In this context, optical coherence tomography (OCT), which is routinely used in ophthalmology, can produce images of the depth of the dental enamel, making it a promising method. In this study, 33 teeth with different MIH severities were evaluated using OCT and microcomputed tomography (microCT). Semi-quantitative methods of grayscale pattern analysis were used to compare images obtained from different severities of MIH with the mineral density obtained through microCT. MicroCT evaluation revealed that hypomineralized enamel had a significantly lower mineral density than intact enamel. However, this difference was not observed between the mild and severe MIH lesions. In the OCT evaluation, significant differences were observed between the intact and hypomineralized enamel, and the gray value comparison provided a method for quantitative differentiation between the two. This study suggests that OCT could be a useful adjunct to traditional diagnostic methods for MIH, offering a noninvasive approach to evaluate enamel defects. RESEARCH HIGHLIGHTS: Combining optical coherence tomography with grayscale digital analysis shows potential as a promising method for diagnosing molar-incisor hypomineralization and assessing its level of severity.

Can the addition of surfactants to NaOCl irrigation impact on the percentage of voids of root canal filling?

This study evaluated the impact of canal irrigation using surfactants associated to NaOCl on the percentage of voids of root canal filling through micro-computed tomographic (micro-CT) analysis. 27 mandibular mesial roots with Vertucci type II canal configuration with isthmus were selected and scanned in a micro-CT device. The specimens were assigned to three groups (n = 9), according to the irrigation solution during instrumentation: 2.5% NaOCl without additives (control), 2.5% NaOCl with 0.1% Benzalkonium Chloride and 2.5% NaOCl with 0.1% Tween 80. After obturation, the specimens were rescanned, and the percentage of voids were calculated. Data were analysed using one-way ANOVA with a significance level of 5%. The percentage of voids were similar among the groups (p > 0.05). None of the specimens showed completely voids-free areas. The addition of surfactants to NaOCl irrigation did not improve the quality of root canal filling of mandibular mesial root canals.

The impact of long-term storage conditions on the development of experimental dentinal microcracks.

This study evaluated the impact of long-term storage conditions (medium and time) on the development of experimental dentinal microcracks through micro-computed tomography. Sixty freshly extracted premolars were stored in formalin, water, or dry conditions (n = 20) and scanned after 72 h, 30 days, 6 months and 3 years of extraction. The effect of the storage medium and time on the occurrence of dentinal defects was statistically evaluated. A total of 211 000 images were screened revealing the existence of 11 519 slices with dentinal defects. Dry conditions significantly contributed to the development of new defects in all time points. During the 3-year follow-up period, no new defects were detected in the teeth that were stored in water and, in a single tooth, in the formalin group, after 6 months of storage.

Immature Stages, Natural History and Population Biology of Opoptera syme (Hübner, 1821), (Lepidoptera: Nymphalidae: Satyrinae) from Southeastern Brazil.

The present study describes the immature stages of Opoptera syme (Hübner, [1821]) using SEM and Micro-CT to generate 2D and 3D models to study the morphology and chaetotaxy, and present information on the natural history, behavior, and population biology. In laboratory, eggs were laid singly, and the isolated larvae passed through six to seven instars. Host plant in the study site is unknown, but larvae are known to feed on bamboos; in laboratory, larvae accepted the ornamental bamboo Bambusa textilis McClure, 1940. Adults are diurnal and univoltine, flying from December to April (the austral summer). The present study adds information to the biology and natural history of Brassolini, an iconic and still poorly known tribe of Neotropical butterflies.

Evaluation of the Ability of 3 Reciprocating Instruments to Remove Obturation Material: A Micro-Computed Tomography Study.

INTRODUCTION: The purpose of this study was to evaluate the ability of the Reciproc, Reciproc Blue, and WaveOne Gold systems to remove filling material during endodontic retreatment of extracted human mandibular premolars. METHODS: Thirty-nine teeth were instrumented with the Protaper Universal System to the F3 file and filled with the Tagger hybrid technique using an F3 gutta-percha cone and AH Plus cement. At the end of this period, the teeth were scanned with micro-computed tomography before and after removal of the filling material from the root canals. The teeth were divided into 3 groups (n = 13) based on the apical volume, depending on the systems used to remove the filling material. Group GR: Reciproc 40/.06; Group GRB: Reciproc Blue 40/.06; and Group GWG: WaveOne Gold 35/.06. The results were statistically analyzed using the tests of Kruskal-Wallis, Duncan, and analysis of variance at a significance level of 5%. RESULTS: The results showed that there were no significant differences between the amounts of filling material removed, either for the apical and middle regions alone or in the overall evaluation for the 3 groups (P = .97). The time evaluation statistically showed that the GR and GWG groups required less time to clean the root canals than the GRB group. CONCLUSIONS: Reciproc R40 files and WaveOne Gold Medium files required less time for endodontic treatment than Reciproc Blue R40 files. There was no difference in the ability to remove obturation material between the 3 instruments. No instrument was able to completely remove the filling material from the root canals.

A Comprehensive Mechanical Characterization of Subject-Specific 3D Printed Scaffolds Mimicking Trabecular Bone Architecture Biomechanics.

This study presents a polymeric scaffold designed and manufactured to mimic the structure and mechanical compressive characteristics of trabecular bone. The morphological parameters and mechanical behavior of the scaffold were studied and compared with trabecular bone from bovine iliac crest. Its mechanical properties, such as modulus of elasticity and yield strength, were studied under a three-step monotonic compressive test. Results showed that the elastic modulus of the scaffold was 329 MPa, and the one for trabecular bone reached 336 MPa. A stepwise dynamic compressive test was used to assess the behavior of samples under various loading regimes. With microcomputed tomography (µCT), a three-dimensional reconstruction of the samples was obtained, and their porosity was estimated as 80% for the polymeric scaffold and 88% for trabecular bone. The full-field strain distribution of the samples was measured using in situ µCT mechanics and digital volume correlation (DVC). This provided information on the local microdeformation mechanism of the scaffolds when compared to that of the tissue. The comprehensive results illustrate the potential of the fabricated scaffolds as biomechanical templates for in vitro studies. Furthermore, there is potential for extending this structure and fabrication methodology to incorporate suitable biocompatible materials for both in vitro and in vivo clinical applications.

Anatomical complexities affecting root canal preparation: a narrative review.

A fundamental aspect of the Endodontic field is the knowledge of root canal anatomy. Using a variety of techniques, the internal and external anatomy of teeth have been extensively investigated throughout the past century. Recent improvements in three-dimensional computed tomography have enabled more detailed evaluations of root canal morphology in both clinical and laboratory settings. Essentially, researches have unveiled that the root canal constitutes a complex system, comprising not only the main root canal but also lateral components, including isthmuses, fins, accessory canals and apical ramifications. Undoubtedly, this intricate morphology poses a significant challenge when it comes to the process of shaping, cleaning and disinfecting the root canal system. This article aims to explore the anatomical aspects of the root canal system that impact the chemomechanical procedures.

Modulation of blood redox status by the progression of induced apical periodontitis in rats.

This study aimed to investigate if apical periodontitis in different periods changes systemic levels of the antioxidant and pro-oxidant parameters in Wistar rats. Twenty-four rats were randomly allocated into healthy animals, apical periodontitis at 14 days (AP14) and apical periodontitis at 28 days (AP28). The first mandibular molars were accessed in the AP groups, and the pulp chamber was exposed to the oral environment, inducing the apical lesion. After 14 and 28 days, the animals were anesthetized, euthanized, and hemimandibles were collected for micro-computed tomography (micro-CT) analysis to measure lesion volume, bone volume (BV), percent of bone to total tissue volume (BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular space (Tb.Sp). A histological examination of the remaining bone was also performed. Finally, blood samples were collected for oxidative biochemistry analysis, investigating glutathione (GSH), Trolox equivalent antioxidant capacity (TEAC), and lipid peroxidation (TBARS). The lesion volume was greater at 28 than at 14 days, as shown by micro-CT. AP14 and AP28 had decreased BV and Tb.Th, but only AP28 showed a reduction in BV/TV. Tb.N and Tb. Sp were increased in apical periodontitis at 28 days. In the histopathological analysis, AP14 had focal regions of moderate mononuclear inflammatory infiltrate, and AP28 had an intense inflammatory infiltrate with bacterial colonies. In the biochemical evaluation, GSH, TEAC, and TBARS were increased after 14 days. However, GSH returned to control levels, TEAC was similar to AP14, and TBARS increased significantly after 28 days. Therefore, the oxidative biochemistry response was modulated according to the progression of periapical damage. After 14 days, the organism could still react to the injury. However, at 28 days, the antioxidant response decreased, associated with an increase in TBARS.

To flat or not to flat? Exploring the impact of flat-side design on rotary instruments using a comprehensive multimethod investigation.

AIM: To assess the influence of a flat-side design on the geometry, metallurgy, mechanical performance and shaping ability of a novel nickel-titanium rotary instrument. METHODOLOGY: Sixty-five new 25-mm flat-side rotary instruments (size 25, taper 0.04) and their nonflat-side prototypes (n = 65) were assessed for major deformations and examined regarding macroscopic and microscopic design, determination of nickel and titanium elements ratio, measurement of phase transformation temperature and evaluation of mechanical performance parameters including time/cycles to fracture, maximum torque, angle of rotation, maximum bending and buckling strengths and cutting ability. Additionally, unprepared canal areas, volume of hard tissue debris and percentage reduction of dentine thickness were calculated for each tested instrument after preparing mesial canals of mandibular molars (n = 12), using micro-CT imaging. Statistical analyses were performed using the U-Mann-Whitney test and independent Student t-test (α = 5%). RESULTS: The number of spirals (n = 8) and blade direction (clockwise) were similar between both flat and nonflat instruments, whilst the helical angles were equivalent (⁓25°). Flat-instruments showed inconsistencies in the homogeneity of the gold colour on the flat-side surface, blade discontinuity, and incomplete and variable S-shaped cross-sections. The titanium-to-nickel ratios were equivalent, but significant differences in the R-phase finish and austenitic start phase transformation temperatures were observed between the flat and nonflat-side instruments. The flat-side instruments demonstrated superior cutting ability compared to the nonflat instruments, as well as, significantly lower values for time to fracture, rotation to fracture and maximum torque to fracture (p < .001). No statistical difference was observed between tested instruments regarding angle of rotation (p = .437), maximum bending (p = .152) and buckling load (p = .411). Preparation protocols using flat and nonflat instruments did not show any statistically significant differences (p > .05). All flat-side instruments exhibited deformation after shaping procedures. CONCLUSIONS: The flat-side instrument showcased enhanced cutting ability compared to its nonflat counterpart. However, it exhibited inferior performance in terms of time, rotation and maximum torque to fracture, along with distinct phase transformation temperatures. No differences were observed in the titanium-to-nickel ratios, angle of rotation, maximum bending, buckling load, preparation time, percentage of untouched canal walls, volume of hard tissue debris and percentage reduction of dentine thickness.

Bone strength is reduced in a neonatal androgenized rat model.

Background: Whether polycystic ovary syndrome (PCOS) affects bone health during a woman's lifespan remains controversial. An androgenized rodent model replicated many metabolic and reproductive features of women with PCOS, and we aimed to use it to investigate the impact of androgens on microarchitecture (by micro-CT), bone mechanical strength, bone formation and resorption markers in rats with intact ovaries (SHAM) who underwent oophorectomy. Methods: Wistar rats (Rattus norvegicus albinus) were employed for the experiments in this study. The protocol of androgenization consisted of the application of 1.25 mg s.c. testosterone propionate beteween days 2-5 of life, while the controls received the same amount of corn oil s.c. as previously established. Androgenized SHAM rats exhibited chronic anovulation identified by vaginal cytology and a reduction in the proportion of corpus luteum in the ovary in comparison to control SHAM rats. The realization of the ovariectomy or SHAM procedure occurred on Day 100 of life. All groups (n = 8) were followed-up for 180 days to address the study endpoints. Results: Micro-CT from androgenized female rats (SHAM) showed a divergence between the trabecular and cortical bone profiles. Compared to SHAM controls, these rats had an increase in trabecular bone mass with a diminution in bone resorption C-terminal telopeptide of type 1 collagen (CTX) (p < 0.05), a concomitant decrease in cortical area and thickness in the femur, and a reduction in the strength of the femur on the mechanical test (p < 0.01). Conclusions: Our results suggest that a reduction in the cortical thickness and cortical area observed in PCOS model rats was associated with a reduced strength of the femur, despite increased trabecular formation. Ovariectomy in the androgenized OVX group limited the progression rate of cortical bone loss, resulting in bone resistance and cortical thickness comparable to those observed in the control OVX group.