Effect of Micro-Nanobubbles on Arsenic Removal by Trichoderma atroviride for Bioscorodite Generation.

The global environmental issue of arsenic (As) contamination in drinking water is a significant problem that requires attention. Therefore, the aim of this research was to address the application of a sustainable methodology for arsenic removal through mycoremediation aerated with micro-nanobubbles (MNBs), leading to bioscorodite (FeAsO4·2H2O) generation. To achieve this, the fungus Trichoderma atroviride was cultivated in a medium amended with 1 g/L of As(III) and 8.5 g/L of Fe(II) salts at 28 °C for 5 days in a tubular reactor equipped with an air MNBs diffuser (TR-MNBs). A control was performed using shaking flasks (SF) at 120 rpm. A reaction was conducted at 92 °C for 32 h for bioscorodite synthesis, followed by further characterization of crystals through Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and X-ray diffraction (XRD) analyses. At the end of the fungal growth in the TR-MNBs, the pH decreased to 2.7-3.0, and the oxidation-reduction potential (ORP) reached a value of 306 mV at 5 days. Arsenic decreased by 70%, attributed to possible adsorption through rapid complexation of oxidized As(V) with the exchangeable ferrihydrite ((Fe(III))4-5(OH,O)12), sites, and the fungal biomass. This mineral might be produced under oxidizing and acidic conditions, with a high iron concentration (As:Fe molar ratio = 0.14). The crystals produced in the reaction using the TR-MNBs culture broth and characterized by SEM, XRD, and FTIR revealed the morphology, pattern, and As-O-Fe vibration bands typical of bioscorodite and römerite (Fe(II)(Fe(III))2(SO4)4·14H2O). Arsenic reduction in SF was 30%, with slight characteristics of bioscorodite. Consequently, further research should include integrating the TR-MNBs system into a pilot plant for arsenic removal from contaminated water.

Assessing three industrially produced fungi for the bioremediation of diclofenac.

Diclofenac is an emerging pollutant: toxic, persistent, and bioaccumulative, present in several environmental niches in a concentration of parts per million. This pharmaceutical's biological removal was reported with various fungal species, showing promissory results. This work aimed at diclofenac removal by individually challenging the fungal species Pleurotus ostreatus, Aspergillus niger, and Penicillium roquefortii but triying to lower the biosorption nature of cell walls by NaCl addition. P. ostreatus removed 100% of the initial diclofenac concentration, whereas A. niger and P. roqueforti removed 74% and 32%, respectively. In all three cases, biosorption by polar interactions was negligible. We demonstrated that stressful environments, such as mineral media, force the fungus to take advantage of its metabolic tools to survive, hence showing higher removal capacity when limiting growth conditions. Bioremediation is an excellent alternative to give residual fungal biomass a secondary use.

Fungal bioproducts for petroleum hydrocarbons and toxic metals remediation: recent advances and emerging technologies.

Petroleum hydrocarbons and toxic metals are sources of environmental contamination and are harmful to all ecosystems. Fungi have metabolic and morphological plasticity that turn them into potential prototypes for technological development in biological remediation of these contaminants due to their ability to interact with a specific contaminant and/or produced metabolites. Although fungal bioinoculants producing enzymes, biosurfactants, polymers, pigments and organic acids have potential to be protagonists in mycoremediation of hydrocarbons and toxic metals, they can still be only adjuvants together with bacteria, microalgae, plants or animals in such processes. However, the sudden accelerated development of emerging technologies related to the use of potential fungal bioproducts such as bioinoculants, enzymes and biosurfactants in the remediation of these contaminants, has boosted fungal bioprocesses to achieve higher performance and possible real application. In this review, we explore scientific and technological advances in bioprocesses related to the production and/or application of these potential fungal bioproducts when used in remediation of hydrocarbons and toxic metals from an integral perspective of biotechnological process development. In turn, it sheds light to overcome existing technological limitations or enable new experimental designs in the remediation of these and other emerging contaminants.

N-acetylation of toxic aromatic amines by fungi: Strain screening, cytotoxicity and genotoxicity evaluation, and application in bioremediation of 3,4-dichloroaniline.

Aromatic amines (AA) are one of the most commonly used classes of compounds in industry and the most common pollutants found in both soil and water. 3,4-Dichloaniline (3,4-DCA) is a persistent residue of the phenylurea herbicide in the environment. In this study, we used a colorimetric method as a new approach to screen 12 filamentous fungal strains of the genera Aspergillus, Chaetomium, Cladosporium, and Mucor to assess their capacity to perform AA N-acetylation since it is considered a potential tool in environmental bioremediation. Subsequently, the selected strains were biotransformed with different AA substrates to evaluate the product yield. The strains Aspergillus niveus 43, Aspergillus terreus 31, and Cladosporium cladosporioides showed higher efficiencies in the biotransformation of 3,4-DCA at 500 µM into its N-acetylated product. These fungal strains also showed great potential to reduce the phytotoxicity of 3,4-DCA in experiments using Lactuca sativa seeds. Furthermore, N-acetylation was shown to be effective in reducing the cytotoxic and genotoxic effects of 3,4-DCA and other AA in the immortalized human keratinocyte (HaCaT) cell line. The isolated products after biotransformation showed that fungi of the genera Aspergillus and Cladosporium appeared to have N-acetylation as the first and main AA detoxification mechanism. Finally, A. terreus 31 showed the highest 3,4-DCA bioremediation potential, and future research can be carried out on the application of this strain to form microbial consortia with great potential for the elimination of toxic AA from the environment.

DhDIT2 Encodes a Debaryomyces hansenii Cytochrome P450 Involved in Benzo(a)pyrene Degradation-A Proposal for Mycoremediation.

Pollutants, such as polycyclic aromatic hydrocarbons (PAHs), e.g., benzo(a)pyrene (BaP), are common components of contaminating mixtures. Such compounds are ubiquitous, extremely toxic, and they pollute soils and aquatic niches. The need for new microorganism-based remediation strategies prompted researchers to identify the most suitable organisms to eliminate pollutants without interfering with the ecosystem. We analyzed the effect caused by BaP on the growth properties of Candida albicans, Debaryomyces hansenii, Rhodotorula mucilaginosa, and Saccharomyces cerevisiae. Their ability to metabolize BaP was also evaluated. The aim was to identify an optimal candidate to be used as the central component of a mycoremediation strategy. The results show that all four yeast species metabolized BaP by more than 70%, whereas their viability was not affected. The best results were observed for D. hansenii. When an incubation was performed in the presence of a cytochrome P450 (CYP) inhibitor, no BaP degradation was observed. Thus, the initial oxidation step is mediated by a CYP enzyme. Additionally, this study identified the D. hansenii DhDIT2 gene as essential to perform the initial degradation of BaP. Hence, we propose that D. hansenii and a S. cerevisiae expressing the DhDIT2 gene are suitable candidates to degrade BaP in contaminated environments.

Talaromyces santanderensis: A New Cadmium-Tolerant Fungus from Cacao Soils in Colombia.

Inorganic pollutants in Colombian cocoa (Theobroma cacao L.) agrosystems cause problems in the production, quality, and exportation of this raw material worldwide. There has been an increased interest in bioprospecting studies of different fungal species focused on the biosorption of heavy metals. Furthermore, fungi constitute a valuable, profitable, ecological, and efficient natural soil resource that could be considered in the integrated management of cadmium mitigation. This study reports a new species of Talaromyces isolated from a cocoa soil sample collected in San Vicente de Chucurí, Colombia. T. santanderensis is featured by Lemon Yellow (R. Pl. IV) mycelium on CYA, mono-to-biverticillade conidiophores, and acerose phialides. T. santanderensis is distinguished from related species by its growth rate on CYAS and powdery textures on MEA, YES and OA, high acid production on CREA and smaller conidia. It is differentiated from T. lentulus by its growth rate on CYA medium at 37 °C without exudate production, its cream (R. PI. XVI) margin on MEA, and dense sporulation on YES and CYA. Phylogenetic analysis was performed using a polyphasic approach, including different phylogenetic analyses of combined and individual ITS, CaM, BenA, and RPB2 gene sequences that indicate that it is new to science and is named Talaromyces santanderensis sp. nov. This new species belongs to the Talaromyces section and is closely related to T. lentulus, T. soli, T. tumuli, and T. pratensis (inside the T. pinophilus species complex) in the inferred phylogeny. Mycelia growth of the fungal strains was subjected to a range of 0-400 mg/kg Cd and incorporated into malt extract agar (MEA) in triplicates. Fungal radial growth was recorded every three days over a 13-day incubation period and In vitro cadmium tolerance tests showed a high tolerance index (0.81) when the mycelium was exposed to 300 mg/kg of Cd. Results suggest that T. santanderensis showed tolerance to Cd concentrations that exceed the permissible limits for contaminated soils, and it is promising for its use in bioremediation strategies to eliminate Cd from highly contaminated agricultural soils.

High tolerance and degradation of fungicides by fungal strains isolated from contaminated soils.

The aim of this work was to isolate fungal strains from phytotoxic agricultural soils, screen them, categorize the most tolerant fungi to three fungicides, and identify them by a molecular approach. In this study, 28 fungal strains were isolated from phytotoxic agricultural soil with intensive use of pesticides. The capacity of fungi to resist and degrade different concentrations of carbendazim, captan, and zineb was determined by an exploratory multivariate analysis. Actinomucor elegans LBM 239 was identified as the most tolerant fungus to these fungicides, degrading a 86.62% of carbendazim after 7 days of treatment. In conclusion, A. elegans LBM 239 demonstrated the highest tolerance and capacity to biodegrade carbendazim, becoming a potential candidate for bioremediation of contaminated soils with carbendazim, captan, or zineb.

Vinasse odyssey: sugarcane vinasse remediation and laccase production by Trametes sp. immobilized in polyurethane foam.

Vinasse is a high pollutant liquid residue from bioethanol production. Due to its toxicity, most vinasse is used not disposed of in water bodies but employed for the fertigation of sugarcane crops, potentially leading to soil salinization or heavy metal deposition. The anaerobic digestion of vinasse for energy production is the main alternative to fertigation, but the process cannot eliminate colored compounds such as melanoidins, caramels, or phenolic compounds. The treatment of raw vinasse with white-rot fungi could remove colored and persistent toxic compounds, but is generally considered cost-ineffective. We report the treatment of vinasse by an autochthonous Trametes sp. strain immobilized in polyurethane foam and the concomitant production of high titers of laccase, a high value-added product that could improve the viability of the process. The reuse of the immobilized biomass and the discoloration of raw vinasse, the concentration of phenolic compounds, BOD and COD, and the phytotoxicity of the treated vinasse were measured to assess the viability of the process and the potential use of treated vinasse in fertigation or as a complementary treatment to anaerobic digestion. Under optimal conditions (vinasse 0.25X, 30 °C, 21 days incubation, 2% glucose added in the implantation stage), immobilized Trametes sp. causes a decrease of 75% in vinasse color and total phenolic compounds, reaching 1082 U L-1 of laccase. The fungi could be used to treat 0.50X vinasse (BOD 44,400 mg O2 L-1), causing a 26% decolorization and a 30% removal of phenolic compounds after 21 days of treatment with maximum laccase titers of 112 U L-1, while reducing COD and BOD from 103,290 to 42,500 mg O2 L-1 (59%) and from 44,440 to 21,230 mg O2 L-1 (52%), respectively. The re-utilization of immobilized biomass to treat 0.50X vinasse proved to be successful, leading to the production of 361 U L-1 of laccase with 77% decolorization, 61% degradation of phenolic compounds, and the reduction of COD and BOD by 75% and 80%, respectively. Trametes sp. also reduced vinasse phytotoxicity to Lactuca sativa seedlings. The obtained results show that the aerobic treatment of vinasse by immobilized Trametes sp. is an interesting technology that could be employed as a sole treatment for the bioremediation of vinasse, with the concomitant the production of laccase. Alternatively, the methodology could be used in combination with anaerobic digestion to achieve greater decolorization and reduction of phenolic compounds, melanoidins, and organic load.

Bioaugmentation of Native Fungi, an Efficient Strategy for the Bioremediation of an Aged Industrially Polluted Soil With Heavy Hydrocarbons.

The concurrence of structurally complex petroleum-associated contaminants at relatively high concentrations, with diverse climatic conditions and textural soil characteristics, hinders conventional bioremediation processes. Recalcitrant compounds such as high molecular weight polycyclic aromatic hydrocarbons (HMW-PAHs) and heavy alkanes commonly remain after standard soil bioremediation at concentrations above regulatory limits. The present study assessed the potential of native fungal bioaugmentation as a strategy to promote the bioremediation of an aged industrially polluted soil enriched with heavy hydrocarbon fractions. Microcosms assays were performed by means of biostimulation and bioaugmentation, by inoculating a defined consortium of six potentially hydrocarbonoclastic fungi belonging to the genera Penicillium, Ulocladium, Aspergillus, and Fusarium, which were isolated previously from the polluted soil. The biodegradation performance of fungal bioaugmentation was compared with soil biostimulation (water and nutrient addition) and with untreated soil as a control. Fungal bioaugmentation resulted in a higher biodegradation of total petroleum hydrocarbons (TPH) and of HMW-PAHs than with biostimulation. TPH (C14-C35) decreased by a 39.90 ± 1.99% in bioaugmented microcosms vs. a 24.17 ± 1.31% in biostimulated microcosms. As for the effect of fungal bioaugmentation on HMW-PAHs, the 5-ringed benzo(a)fluoranthene and benzo(a)pyrene were reduced by a 36% and 46%, respectively, while the 6-ringed benzoperylene decreased by a 28%, after 120 days of treatment. Biostimulated microcosm exhibited a significantly lower reduction of 5- and 6-ringed PAHs (8% and 5% respectively). Higher TPH and HMW-PAHs biodegradation levels in bioaugmented microcosms were also associated to a significant decrease in acute ecotoxicity (EC50) by Vibrio fischeri bioluminiscence inhibition assays. Molecular profiling and counting of viable hydrocarbon-degrading bacteria from soil microcosms revealed that fungal bioaugmentation promoted the growth of autochthonous active hydrocarbon-degrading bacteria. The implementation of such an approach to enhance hydrocarbon biodegradation should be considered as a novel bioremediation strategy for the treatment of the most recalcitrant and highly genotoxic hydrocarbons in aged industrially polluted soils.

Mycoremediation of oxytetracycline by marine fungi mycelium isolated from salmon farming areas in the south of Chile.

Antibiotics are extensively used for growth promotion purposes in intensive aquaculture. In Chile, the use of antibiotics in salmon farming is excessive, approximately 62 times more than is used in Norway. In the salmon industry, antibiotics such as oxytetracycline (OTC) are administered in the diet, both in the juvenile stage in freshwater and in the fattening process of salmon in marine sectors. We have investigated the fjords of Chile, where many salmon farms are located, searching for fungi able to degrade this tetracycline antibiotic. We have evaluated the OTC degradation ability of the following; Penicillium commune, Epicoccum nigrum, Trichoderma harzianum, Aspergillus terreus and Beauveria bassiana, isolated from sediments in salmon farms from southern Chile. In all these fungal strains, the amount of OTC decreased in the culture medium, as adsorbed in the mycelia, after the third day of exposure. These strains were capable of degrading OTC at remarkable rates up to 78%, by the 15th day. This is the first study showing that the mycelium of these fungal strains has the ability to degrade OTC. We believe the knowledge produced by these results has the potential to serve as a basis for implementing a bioremediation process in the near future.

Comparative study of single cultures and a consortium of white rot fungi for polychlorinated biphenyls treatment.

AIMS: To evaluate the mycoremediation of polychlorinated biphenyls (PCBs) by either single cultures or binary consortia of Pleurotus pulmonarius LBM 105 and Trametes sanguinea LBM 023. METHODS AND RESULTS: PCBs tolerance, removal capacity, toxicity reduction and ligninolytic enzyme expression were assessed when growing single culture and binary consortium of fungus in 217 mg l-1 of a technical mixture of Aroclor 1242, 1254 and 1260 in transformer oil. A decrease in tolerance and variation in ligninolytic enzyme secretion were observed in PCB-amended solid media. Pleurotus pulmonarius LBM 105 mono-culture was able to remove up to 95·4% of PCBs, whereas binary consortium and T. sanguinea LBM 023 could biodegrade about 55% after 24 days. Significant detoxification levels were detected in all treatments by biosorption mechanism. CONCLUSIONS: Pleurotus pulmonarius LBM 105 in single culture had the best performance regarding PCBs biodegradation and toxicity reduction. Ligninolytic enzyme secretion changed in co-culture. SIGNIFICANCE AND IMPACT OF THE STUDY: The evaluation of PCBs bioremediation effectiveness of basidiomycetes consortium in terms of PCB removal, toxicity and ligninolytic enzyme production to unravel the differences between using individual cultures or consortium has not been reported. The results from this study enable the selection of P. pulmonarius LBM 105 mono-culture to bioremediate PCBs as it showed higher efficiency compared to binary consortium with T. sanguinea LBM 023 for potential decontamination of PCB-contaminated transformer oil.

Use of Phanerochaete Chrysosporium in a Semibatch Reactor for Removal of Indigo Carmine from Synthetic Textile Wastewater

Abstract The textile industry demonstrates a polluting potential from the planting of cotton to the release of wastewater. The presence of dyes in water bodies decreases the passage of sun rays and directly affects the photosynthetic organisms and the ecosystem. Fungi have potential in the treatment of wastewater containing dyes with complex organic structures due to enzymes that they produce. This study evaluated the use of Phanerochaete chrisosporium in the treatment of synthetic effluent from textile industry containing indigo carmine (20 mg/L). The fungus was immobilized in a semibatch reactor. Glucose was the cosubstrate employed in the experiment and it was used in the system at 1g/L at the beginning of the process and 0.5 g /L after 24 hours of reaction. Average dye removal was 84±10% and chemical oxygen demand removal was 79±14%. For nitrogen compounds, the removal efficiencies were 87±11%, 81±11% and 91±9% for ammonia, nitrite and nitrate, respectively. The pH of the medium remained in the acidic range (2.57 to 5.00) throughout the process, with the lowest values recorded in the effluent of each cycle, justified by the release of organic acids from fungi metabolism. There was contamination of the medium by bacteria (710,000 CFU/mL), but the colonies count showed a predominance of fungi (1,365,000 CFU/mL). With the use of the semibatch system after reading of glucose it was observed that the efficiency of dye removal evolved from 72±17% to 84±10%, producing a final effluent with 3.35±1.99 mg/L of indigo, which proves that treatment configuration analyzed is satisfactory for dye removal.

Heavy metal tolerance traits of filamentous fungi isolated from gold and gemstone mining sites

Increased environmental pollution has necessitated the need for eco-friendly clean-up strategies. Filamentous fungal species from gold and gemstone mine site soils were isolated, identified and assessed for their tolerance to varied heavy metal concentrations of cadmium (Cd), copper (Cu), lead (Pb), arsenic (As) and iron (Fe). The identities of the fungal strains were determined based on the internal transcribed spacer 1 and 2 (ITS 1 and ITS 2) regions. Mycelia growth of the fungal strains were subjected to a range of (0-100 Cd), (0-1000 Cu), (0-400 Pb), (0-500 As) and (0-800 Fe) concentrations (mgkg-1) incorporated into malt extract agar (MEA) in triplicates. Fungal radial growths were recorded every three days over a 13-days' incubation period. Fungal strains were identified as Fomitopsis meliae, Trichoderma ghanense and Rhizopus microsporus. All test fungal exhibited tolerance to Cu, Pb, and Fe at all test concentrations (400-1000 mgkg-1), not differing significantly (p > 0.05) from the controls and with tolerance index >1. T. ghanense and R. microsporus demonstrated exceptional capacity for Cd and As concentrations, while showing no significant (p > 0.05) difference compared to the controls and with a tolerance index >1 at 25 mgkg-1 Cd and 125 mgkg-1 As. Remarkably, these fungal strains showed tolerance to metal concentrations exceeding globally permissible limits for contaminated soils. It is envisaged that this metal tolerance trait exhibited by these fungal strains may indicate their potentials as effective agents for bioremediative clean-up of heavy metal polluted environments.(AU)

Heavy metal tolerance traits of filamentous fungi isolated from gold and gemstone mining sites

ABSTRACT Increased environmental pollution has necessitated the need for eco-friendly clean-up strategies. Filamentous fungal species from gold and gemstone mine site soils were isolated, identified and assessed for their tolerance to varied heavy metal concentrations of cadmium (Cd), copper (Cu), lead (Pb), arsenic (As) and iron (Fe). The identities of the fungal strains were determined based on the internal transcribed spacer 1 and 2 (ITS 1 and ITS 2) regions. Mycelia growth of the fungal strains were subjected to a range of (0-100 Cd), (0-1000 Cu), (0-400 Pb), (0-500 As) and (0-800 Fe) concentrations (mgkg-1) incorporated into malt extract agar (MEA) in triplicates. Fungal radial growths were recorded every three days over a 13-days' incubation period. Fungal strains were identified as Fomitopsis meliae, Trichoderma ghanense and Rhizopus microsporus. All test fungal exhibited tolerance to Cu, Pb, and Fe at all test concentrations (400-1000 mgkg-1), not differing significantly (p > 0.05) from the controls and with tolerance index >1. T. ghanense and R. microsporus demonstrated exceptional capacity for Cd and As concentrations, while showing no significant (p > 0.05) difference compared to the controls and with a tolerance index >1 at 25 mgkg-1 Cd and 125 mgkg-1 As. Remarkably, these fungal strains showed tolerance to metal concentrations exceeding globally permissible limits for contaminated soils. It is envisaged that this metal tolerance trait exhibited by these fungal strains may indicate their potentials as effective agents for bioremediative clean-up of heavy metal polluted environments.

Heavy metal tolerance traits of filamentous fungi isolated from gold and gemstone mining sites.

Increased environmental pollution has necessitated the need for eco-friendly clean-up strategies. Filamentous fungal species from gold and gemstone mine site soils were isolated, identified and assessed for their tolerance to varied heavy metal concentrations of cadmium (Cd), copper (Cu), lead (Pb), arsenic (As) and iron (Fe). The identities of the fungal strains were determined based on the internal transcribed spacer 1 and 2 (ITS 1 and ITS 2) regions. Mycelia growth of the fungal strains were subjected to a range of (0-100 Cd), (0-1000 Cu), (0-400 Pb), (0-500 As) and (0-800 Fe) concentrations (mgkg-1) incorporated into malt extract agar (MEA) in triplicates. Fungal radial growths were recorded every three days over a 13-days' incubation period. Fungal strains were identified as Fomitopsis meliae, Trichoderma ghanense and Rhizopus microsporus. All test fungal exhibited tolerance to Cu, Pb, and Fe at all test concentrations (400-1000mgkg-1), not differing significantly (p>0.05) from the controls and with tolerance index >1. T. ghanense and R. microsporus demonstrated exceptional capacity for Cd and As concentrations, while showing no significant (p>0.05) difference compared to the controls and with a tolerance index >1 at 25mgkg-1 Cd and 125mgkg-1 As. Remarkably, these fungal strains showed tolerance to metal concentrations exceeding globally permissible limits for contaminated soils. It is envisaged that this metal tolerance trait exhibited by these fungal strains may indicate their potentials as effective agents for bioremediative clean-up of heavy metal polluted environments.

Degradation of the herbicide paraquat by macromycetes isolated from southeastern Mexico.

Fifty-four macromycetes, isolated from southeastern Mexico, were used in order to evaluate their capacity for degradation and tolerance to the herbicide paraquat. Ten of these strains were capable of growing in a solid culture medium in the presence of 200 ppm paraquat. Subsequently, assays to evaluate the degradation of the xenobiotic in a liquid medium were carried out. Of the ten strains evaluated, three presented the highest levels of degradation of the compound, which were Trametes pavonia (54.2%), Trametes versicolor (54.1%) and Hypholoma dispersum. They presented the highest overall degradation percentage (70.7%) after 12 days culture. The presence of ligninolytic enzymes in these strains was evaluated. H. dispersum only presented aryl alcohol oxidase activity; however, with the data obtained, it was not possible to conclude whether this specific enzyme is responsible for paraquat degradation. The level of degradation obtained is above the one reported for Pseudomonas putida, one of the few reports on paraquat degradation. This is the first report on the contaminant degradation capacity of H. dispersum.

Atrazine degradation by fungal co-culture enzyme extracts under different soil conditions.

This investigation was undertaken to determine the atrazine degradation by fungal enzyme extracts (FEEs) in a clay-loam soil microcosm contaminated at field application rate (5 µg g(-1)) and to study the influence of different soil microcosm conditions, including the effect of soil sterilization, water holding capacity, soil pH and type of FEEs used in atrazine degradation through a 2(4) factorial experimental design. The Trametes maxima-Paecilomyces carneus co-culture extract contained more laccase activity and hydrogen peroxide (H2O2) content (laccase = 18956.0 U mg protein(-1), H2O2 = 6.2 mg L(-1)) than the T. maxima monoculture extract (laccase = 12866.7 U mg protein(-1), H2O2 = 4.0 mg L(-1)). Both extracts were able to degrade atrazine at 100%; however, the T. maxima monoculture extract (0.32 h) achieved a lower half-degradation time than its co-culture with P. carneus (1.2 h). The FEE type (p = 0.03) and soil pH (p = 0.01) significantly affected atrazine degradation. The best degradation rate was achieved by the T. maxima monoculture extract in an acid soil (pH = 4.86). This study demonstrated that both the monoculture extracts of the native strain T. maxima and its co-culture with P. carneus can efficiently and quickly degrade atrazine in clay-loam soils.

Degradation and detoxification of three textile Azo dyes by mixed fungal cultures from semi-arid region of Brazilian Northeast

The aim of this work was to study the degradation and detoxification of three textile azo dyes (Reactive Red 198, Reactive Red 141 and Reactive Blue 214) by mixed fungal cultures from semi-arid region of Brazilian Northeast. Sediment samples of twenty water reservoirs in the surroundings of Serra da Capivara National Park, area of environmental preservation in the caatinga in the State of Piauí, with semi-arid climate, were evaluated in order to select the consortia of fungi capable to degrade and detoxify these dyes. The mixed fungal culture from Caldeirão Escuridão (CE) reservoir was the most efficient in the degradation and detoxification of the dyes tested.

Mycoremediation of congo red dye by filamentous fungi.

Azo, anthroquinone and triphenylmethane dyes are the major classes of synthetic colourants, which are difficult to degrade and have received considerable attention. Congo red, a diazo dye, is considered as a xenobiotic compound, and is recalcitrant to biodegradative processes. Nevertheless, during the last few years it has been demonstrated that several fungi, under certain environmental conditions, are able to transfer azo dyes to non toxic products using laccases. The aim of this work was to study the factors influencing mycoremediation of Congo red. Several basidiomycetes and deuteromycetes species were tested for the decolourisation of Congo red (0.05 g/l) in a semi synthetic broth at static and shaking conditions. Poor decolourisation was observed when the dye acted as the sole source of nitrogen, whereas semi synthetic broth supplemented with fertilizer resulted in better decolourisation. Decolourisation of Congo red was checked in the presence of salts of heavy metals such as mercuric chloride, lead acetate and zinc sulphate. Decolourisation parameters such as temperature, pH, and rpm were optimized and the decolourisation obtained at optimized conditions varied between 29.25- 97.28% at static condition and 82.1- 100% at shaking condition. Sodium dodecyl sulphate polyacrylamide gel electrophoretic analysis revealed bands with molecular weights ranging between 66.5 to 71 kDa, a characteristic of the fungal laccases. High efficiency decolourisation of Congo red makes these fungal forms a promising choice in biological treatment of waste water containing Congo red.