A comparative study on grasping-related muscles in five Accipitriformes species.

Accipitriformes are diverse in their prey preferences and use their grasping feet for hunting. Little is known about the architectural design of muscles related to grasping among species of different sizes, diets, and foraging behaviors. In the present study, we report quantitative data and analysis of the pelvic musculature of the Japanese sparrowhawk (Accipiter gularis), Eurasian sparrowhawk (Accipiter nisus), common buzzard (Buteo buteo), northern goshawk (Accipiter gentilis), and cinereous vulture (Aegypius monachus). As expected, mass and architecture of the considered muscles were very different between the cinereous vulture and the four other species. The cinereous vulture allocates more mass and physiological cross-sectional area (PCSA) to the proximally inserted flexor muscles, which indicates the rudimentary grasping ability of the foot and is a myological reflection of its carrion preference. Furthermore, in the cinereous vulture, muscles were built with the lowest architectural index (AI) compared with the other species, and the intrinsic foot muscles were short-fibered, which is disadvantageous for rapid manipulation and foot dexterity. The other four species, as a whole, featured large flexor hallucis longus (FHL) muscles and better development of distally inserted flexors, reflecting their predatory lifestyle. Some differences were also found between the species that consumed birds and those that consumed mammals. The two avivorous species were superior in AI and fiber length of the intrinsic foot muscles which are suitable for good hunting speed and digit flexibility, the prerequisition for hunting agile prey.

Effect of low back pain on the kinetics and kinematics of the lumbar spine - a combined in vivo and in silico investigation.

Lifting is a significant risk factor for low back pain (LBP). Different biomechanical factors including spinal loads, kinematics, and muscle electromyography (EMG) activities have previously been investigated during lifting activities in LBP patients and asymptomatic individuals to identify their association with LBP. However, the findings were contradictory and inconclusive. Accurate and subject-specific prediction of spinal loads is crucial for understanding, diagnosing, planning tailored treatments, and preventing recurrent pain in LBP patients. Therefore, the present study aimed to estimate the L5-S1 compressive and resultant shear loads in 19 healthy and 17 non-specific chronic LBP individuals during various static load-holding tasks (holding a 10 kg box at hip, chest, and head height) using full-body and personalized musculoskeletal models driven by subject-specific in vivo kinematic/kinetic, EMG, and physiological cross-sectional areas (PCSAs) data. These biomechanical characteristics were concurrently analyzed to identify potential differences between the two groups. Statistical analyses showed that LBP had almost no significant effect on the range of motion (trunk, lumbar, pelvis), PCSA, and EMG. There were no significant differences (p > 0.05) in the predicted L5-S1 loads. However, as the task became more demanding, by elevating the hand-load from hip to head, LBP patients experienced significant increases in both compressive (33 %, p = 0.00) and shear (25 %, p = 0.02) loads, while asymptomatic individuals showed significant increases only in compressive loads (30 %, p = 0.01). This suggests that engaging in more challenging activities could potentially magnify the effect of LBP on the biomechanical factors and increase their discrimination capacity between LBP and asymptomatic individuals.

Quantitative assessment of grasping strength in platyrrhine monkeys.

OBJECTIVES: Despite the longstanding importance of grasping adaptations in theories of primate evolution, quantitative data on primate grasping strength remain rare. We present the results of two studies testing the prediction that callitrichines-given their comparative retreat from a small-branch environment and specialization for movement and foraging on tree trunks and large boughs-should be characterized by weaker grasping forces and underdeveloped digital flexor muscles relative to other platyrrhines. METHODS: First, we directly measured manual grasping strength in marmosets (Callithrix jacchus) and squirrel monkeys (Saimiri boliviensis), using a custom-constructed force transducer. Second, we reanalyzed existing datasets on the fiber architecture of forearm and leg muscles in 12 platyrrhine species, quantifying digital flexor muscle physiological cross-sectional area (i.e., PCSA, a morphometric proxy of muscle strength) relative to the summed PCSA across all forearm or leg muscles. RESULTS: Callithrix was characterized by lower mean and maximum grasping forces than Saimiri, and callitrichines as a clade were found to have relatively underdeveloped manual digital flexor muscle PCSA. However, relative pedal digital flexor PCSA did not significantly differ between callitrichines and other platyrrhines. CONCLUSIONS: We found partial support for the hypothesis that variation in predominant substrate usage explains variation in empirical measurements of and morphological correlates of grasping strength in platyrrhines. Future research should extend the work presented here by (1) collecting morphological and empirical metrics of grasping strength in additional primate taxa and (2) extending performance testing to include empirical measures of primate pedal grasping forces as well.

A comparison of dissection and 3D approaches to estimate muscle physiological cross-sectional area, validated by in vivo bite forces.

Performance traits such as bite forces are crucial to fitness and relate to the niche and adaptation of species. However, for many insects it is not possible to directly measure bite forces because they are too small. Biomechanical models of bite forces are therefore relevant to test hypotheses of adaptation in insects and other small organisms. Although such models are based on classical mechanics, combining forces, material properties and laws of levers, it is currently unknown how various models relate to bite forces measured in vivo. One critical component of these models is the physiological cross-sectional area (PCSA) of muscles, which relates to the maximum amount of force they can produce. Here, using the grasshopper Schistocerca gregaria, we compare various ways to obtain PCSA values and use in vivo measurements of bite forces to validate the biomechanical models. We show that most approaches used to derive PCSA (dissection, 3D muscle convex hull volume, muscle attachment area) are consistent with the expected relationships between PCSA and bite force, as well as with the muscle stress values known for insects. The only exception to this are PCSA values estimated by direct 3D muscle volume computation, which could be explained by noisy variation produced by shrinkage. This method therefore produces PCSA values which are uncorrelated to in vivo bite forces. Furthermore, despite the fact that all other methods do not significantly differ from expectations, their derived PCSA values vary widely, suggesting a lack of comparability between studies relying on different methods.

Reduction of wing area affects estimated stress in the primary flight muscles of chickens.

In flying birds, the pectoralis (PECT) and supracoracoideus (SUPRA) generate most of the power required for flight, while the wing feathers create the aerodynamic forces. However, in domestic laying hens, little is known about the architectural properties of these muscles and the forces the wings produce. As housing space increases for commercial laying hens, understanding these properties is important for assuring safe locomotion. We tested the effects of wing area loss on mass, physiological cross-sectional area (PCSA), and estimated muscle stress (EMS) of the PECT and SUPRA in white-feathered laying hens. Treatments included Unclipped (N = 18), Half-Clipped with primaries removed (N = 18) and Fully-Clipped with the primaries and secondaries removed (N = 18). The mass and PCSA of the PECT and SUPRA did not vary significantly with treatment. Thus, laying hen muscle anatomy may be relatively resistant to changes in external wing morphology. We observed significant differences in EMS among treatments, as Unclipped birds exhibited the greatest EMS. This suggests that intact wings provide the greatest stimulus of external force for the primary flight muscles.

Neuromechanical Properties of the Vastus Medialis and Vastus Lateralis in Adolescents With Patellofemoral Pain.

Background: An alteration in the force distribution among quadriceps heads is one possible underlying mechanism of patellofemoral pain. However, this hypothesis cannot be directly tested as there are currently no noninvasive experimental techniques to measure individual muscle force or torque in vivo in humans. In this study, the authors considered a combination of biomechanical and muscle activation measures, which enabled us to estimate the mechanical impact of the vastus medialis (VM) and vastus lateralis (VL) on the patella. Purpose/Hypothesis: The purpose of this study was to determine whether the relative index of torque distribution for the VM and VL differs between adolescents with and without patellofemoral pain. It was hypothesized that, relative to the VL, the VM would contribute less to knee extension torque in adolescents with patellofemoral pain compared with controls. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Twenty adolescents with patellofemoral pain and 20 matched control participants were included (38 female; age, 15.3 ± 1.8 years; weight, 58 ± 13 kg; height, 164 ± 8 cm). Muscle volumes and resting moment arms were quantified from magnetic resonance images, and fascicle lengths were obtained from panoramic B-mode ultrasonography. Muscle activation was estimated using surface electromyography during submaximal isometric tasks (wall-squat and seated tasks). Muscle torque was estimated as the product of muscle physiological cross-sectional area (ie, muscle volume/fascicle length), muscle activation (normalized to maximal activation), and moment arm. Results: Across tasks and force levels, the relative contribution of the VM to the overall medial and lateral vastii torque was 31.0% ± 8.6% for controls and 31.5 ± 7.6% for adolescents with patellofemoral pain (group effect, P > .34). Conclusion: For the tasks and positions investigated in this study, the authors found no evidence of lower VM torque generation (relative to the VL) in adolescents with patellofemoral pain compared with controls.

Influence of internal muscle properties on muscle shape change and gearing in the human gastrocnemii.

Skeletal muscles bulge when they contract. These three-dimensional shape changes, coupled with fiber rotation, influence a muscle's mechanical performance by uncoupling fiber velocity from muscle belly velocity (i.e., gearing). Muscle shape change and gearing are likely mediated by the interaction between internal muscle properties and contractile forces. Muscles with greater stiffness and intermuscular fat, due to aging or disuse, may limit a muscle's ability to bulge in width, subsequently causing higher gearing. The aim of this study was to determine the influence of internal muscle properties on shape change, fiber rotation, and gearing in the medial (MG) and lateral gastrocnemii (LG) during isometric plantar flexion contractions. Multimodal imaging techniques were used to measure muscle shear modulus, intramuscular fat, and fat-corrected physiological cross-sectional area (PCSA) at rest, as well as synchronous muscle architecture changes during submaximal and maximal contractions in the MG and LG of 20 young (24 ± 3 yr) and 13 older (70 ± 4 yr) participants. Fat-corrected PCSA was positively associated with fiber rotation, gearing, and changes in thickness during submaximal contractions, but it was negatively associated with changes in thickness at maximal contractions. Muscle stiffness and intramuscular fat were related to muscle bulging and reduced fiber rotation, respectively, but only at high forces. Furthermore, the MG and LG had varied internal muscle properties, which may relate to the differing shape changes, fiber rotations, and gearing behaviors observed at each contraction level. These results indicate that internal muscle properties may play an important role in mediating in vivo muscle shape change and gearing, especially during high-force contractions.NEW & NOTEWORTHY Here, we measured internal muscle properties in vivo to determine their influence on the varying shape change and gearing behaviors in the synergistic gastrocnemii muscles. These relationships have previously only been hypothesized or examined within isolated muscles during supramaximal contractions. Our results contribute to a more comprehensive understanding of the factors that influence a muscle's mechanical response to force with implications for preventing or treating muscle deficits associated with aging, disease, and disuse.

Behavioral correlates of fascicular organization: The confluence of muscle architectural anatomy and function.

Muscle is a complex tissue that has been studied on numerous hierarchical levels: from gross descriptions of muscle organization to cellular analyses of fiber profiles. In the middle of this space between organismal and cellular biology lies muscle architecture, the level at which functional correlations between a muscle's internal fiber organization and contractile abilities are explored. In this review, we summarize this relationship, detail recent advances in our understanding of this form-function paradigm, and highlight the role played by The Anatomical Record in advancing our understanding of functional morphology within muscle over the past two decades. In so doing, we honor the legacy of Editor-in-Chief Kurt Albertine, whose stewardship of the journal from 2006 through 2020 oversaw the flourishing of myological research, including numerous special issues dedicated to exploring the behavioral correlates of myology across diverse taxa. This legacy has seen the The Anatomical Record establish itself as a preeminent source of myological research, and a true leader within the field of comparative anatomy and functional morphology.

Muscle architecture of the hindlimb of Tyto furcata (Aves Strigiformes): Highlights in owl morphology.

The American barn owl is a nocturnal bird of prey in which hind limb movements are a key factor in obtaining food; however, the architectural properties of its hind limb muscles have not been studied. This study sought to identify functional trends in the Tyto furcata hindlimb muscles by studying muscular architecture. The architectural parameters of the selected hip, knee, ankle, and digit muscles were studied in three specimens of the Tyto furcata and joint muscular proportions with an additional dataset were calculated. Previously published information on Asio otus was used for comparison. The flexor muscles of the digits had the highest muscle mass. Regarding architectural parameters, the main flexor of the digits (flexor digitorum longus) and the muscles that extend the knee and ankle joints (femorotibialis and gastrocnemius) showed a high physiological cross-sectional area (PCSA) and short fibers, allowing powerful digit flexion and knee and ankle extension. These mentioned features are in accordance with hunting behavior, in which prey capture is not only closely linked to the flexion of the digits but also to the movements of the ankle. During hunting, the distal hind limb is flexed and then fully extended at the moment of contact with the prey, whereas the digits are close to grasping the prey. The hip muscles showed a predominance of extensors over flexors, which were more massive, with parallel fibers and without tendons or short fibers. These features lead to a higher capacity to generate velocity to the detriment of forces, as indicated by the high values of the architectural index, their relatively low PCSA, and short or intermediate fiber length, which enhance the control of the joint positions and muscle length. Compared to Asio otus, Tyto furcata showed longer fibers; however, the relationship between fiber length and PCSA was similar for both species.

Reversed sexual dimorphism in the leg muscle architecture of the Eurasian sparrowhawk.

Reversed sexual dimorphism (RSD) in size is a deep issue in evolutionary biology. RSD in body mass and linear measures is pronounced in diurnal predatory bird species, especially in those that feed on other birds. Size differences between males and females in internal organs or systems, such as the appendicular musculature, are less well known. In this study, 14 muscles related to toe closure in the Eurasian sparrowhawk (Accipiter nisus), a bird-eating species, were selected for dissection and architectural measurement. The muscle mass (MM), physiological cross-sectional area (PCSA), and fiber length (FL) were compared between sexes to detect the possible presence and/or degree of RSD. The results revealed significant RSD in MM and PCSA and suggested a higher force-generating capacity in females than in males. In females, greater strength in M. tibialis cranialis, M. iliofibularis, and six digital flexors enabled them to capture and carry larger prey, whereas more massive development in M. abductor digiti II and M. abductor digiti IV provided their feet with greater dexterity to improve the effectiveness of grasping larger mobile prey and preventing escape during capture. Fiber length did not show RSD. Generally, males had longer relative and absolute fiber length, indicative of enhanced working range and speed of contraction that was advantageous when hunting small prey. The differences between the sexes in architectural design and the high degree of RSD in MM and PCSA are correlated with the bird-eating diet and prey size difference of this species.

Anatomically grounded estimation of hindlimb muscle sizes in Archosauria.

In vertebrates, active movement is driven by muscle forces acting on bones, either directly or through tendinous insertions. There has been much debate over how muscle size and force are reflected by the muscular attachment areas (AAs). Here we investigate the relationship between the physiological cross-sectional area (PCSA), a proxy for the force production of the muscle, and the AA of hindlimb muscles in Nile crocodiles and five bird species. The limbs were held in a fixed position whilst blunt dissection was carried out to isolate the individual muscles. AAs were digitised using a point digitiser, before the muscle was removed from the bone. Muscles were then further dissected and fibre architecture was measured, and PCSA calculated. The raw measures, as well as the ratio of PCSA to AA, were studied and compared for intra-observer error as well as intra- and interspecies differences. We found large variations in the ratio between AAs and PCSA both within and across species, but muscle fascicle lengths are conserved within individual species, whether this was Nile crocodiles or tinamou. Whilst a discriminant analysis was able to separate crocodylian and avian muscle data, the ratios for AA to cross-sectional area for all species and most muscles can be represented by a single equation. The remaining muscles have specific equations to represent their scaling, but equations often have a relatively high success at predicting the ratio of muscle AA to PCSA. We then digitised the muscle AAs of Coelophysis bauri, a dinosaur, to estimate the PCSAs and therefore maximal isometric muscle forces. The results are somewhat consistent with other methods for estimating force production, and suggest that, at least for some archosaurian muscles, that it is possible to use muscle AA to estimate muscle sizes. This method is complementary to other methods such as digital volumetric modelling.

Estimating bite force in extinct dinosaurs using phylogenetically predicted physiological cross-sectional areas of jaw adductor muscles.

I present a Bayesian phylogenetic predictive modelling (PPM) framework that allows the prediction of muscle parameters (physiological cross-sectional area, A Phys) in extinct archosaurs from skull width (W Sk) and phylogeny. This approach is robust to phylogenetic uncertainty and highly versatile given its ability to base predictions on simple, readily available predictor variables. The PPM presented here has high prediction accuracy (up to 95%), with downstream biomechanical modelling yielding bite force estimates that are in line with previous estimates based on muscle parameters from reconstructed muscles. This approach does not replace muscle reconstructions but one that provides a powerful means to predict A Phys from skull geometry and phylogeny to the same level of accuracy as that measured from reconstructed muscles in species for which soft tissue data are unavailable or difficult to obtain.

Glycine receptor subunit-ß-deficiency in a mouse model of spasticity results in attenuated physical performance, growth, and muscle strength.

Spasticity is the most common neurological disorder associated with increased muscle contraction causing impaired movement and gait. The aim of this study was to characterize the physical performance, skeletal muscle function, and phenotype of mice with a hereditary spastic mutation (B6.Cg-Glrbspa/J). Motor function, gait, and physical activity of juvenile and adult spastic mice and the morphological, histological, and mechanical characteristics of their soleus and gastrocnemius medialis muscles were compared with those of their wild-type (WT) littermates. Spastic mice showed attenuated growth, impaired motor function, and low physical activity. Gait of spastic mice was characterized by a typical hopping pattern. Spastic mice showed lower muscle forces, which were related to the smaller physiological cross-sectional area of spastic muscles. The muscle-tendon complex length-force relationship of adult gastrocnemius medialis was shifted toward shorter lengths, which was explained by attenuated longitudinal tibia growth. Spastic gastrocnemius medialis was more fatigue resistant than WT gastrocnemius medialis. This was largely explained by a higher mitochondrial content in muscle fibers and relatively higher percentage of slow-type muscle fibers. Muscles of juvenile spastic mice showed similar differences compared with WT juvenile mice, but these were less pronounced than between adult mice. This study shows that in spastic mice, disturbed motor function and gait is likely to be the result of hyperactivity of skeletal muscle and impaired skeletal muscle growth, which progress with age.

Sex-specific ontogenetic patterns of cranial morphology, theoretical bite force, and underlying jaw musculature in fishers and American martens.

The carnivoran cranium undergoes tremendous growth in size and development of shape to process prey as adults and, importantly, these ontogenetic processes can also differ between the sexes. How these ontogenetic changes in morphology actually relate to the underlying jaw musculature and overall bite performance has rarely been investigated. In this study, I examined sex-specific ontogenetic changes in cranial morphology, jaw adductor muscles, and theoretical bite force between subadults and adults in the fisher (Pekania pennanti) and American marten (Martes americana). I found evidence that cranial size alone does not completely explain ontogenetic increases in bite forces as found in other mammalian species. Instead, cranial shape development also drives ontogenetic increases in relative bite force by broadening the zygomatic arches and enlargement of the sagittal crest, both of which enable relatively larger jaw adductor muscles to attach. In contrast, examination of sexual dimorphism within each age-class revealed that cranial shape dimorphism did not translate to dimorphism in either size-corrected bite forces or size-corrected physiological cross-sectional area of the jaw adductor muscles. These results reveal that morphological size and shape variation can have different influences on bite performance depending on the level of intraspecific variation that is examined (i.e. ontogenetic versus sexual dimorphism).

Comparative forelimb myology and muscular architecture of a juvenile Malayan tapir (Tapirus indicus).

The absence of preserved soft tissues in the fossil record is frequently a hindrance for palaeontologists wishing to investigate morphological shifts in key skeletal systems, such as the limbs. Understanding the soft tissue composition of modern species can aid in understanding changes in musculoskeletal features through evolution, including those pertaining to locomotion. Establishing anatomical differences in soft tissues utilising an extant phylogenetic bracket can, in turn, assist in interpreting morphological changes in hard tissues and modelling musculoskeletal movements during evolutionary transitions (e.g. digit reduction in perissodactyls). Perissodactyls (horses, rhinoceroses, tapirs and their relatives) are known to have originated with a four-toed (tetradactyl) forelimb condition. Equids proceeded to reduce all but their central digit, resulting in monodactyly, whereas tapirs retained the ancestral tetradactyl state. The modern Malayan tapir (Tapirus indicus) has been shown to exhibit fully functional tetradactyly in its forelimb, more so than any other tapir, and represents an ideal case-study for muscular arrangement and architectural comparison with the highly derived monodactyl Equus. Here, we present the first quantification of muscular architecture of a tetradactyl perissodactyl (T. indicus), and compare it to measurements from modern monodactyl caballine horse (Equus ferus caballus). Each muscle of the tapir forelimb was dissected out from a cadaver and measured for architectural properties: muscle-tendon unit (MTU) length, MTU mass, muscle mass, pennation angle, and resting fibre length. Comparative parameters [physiological cross-sectional area (PCSA), muscle volume, and % muscle mass] were then calculated from the raw measurements. In the shoulder region, the infraspinatus of T. indicus exhibits dual origination sites on either side of the deflected scapular spine. Within ungulates, this condition has only been previously reported in suids. Differences in relative contribution to limb muscle mass between T. indicus and Equus highlight forelimb muscles that affect mobility in the lateral and medial digits (e.g. extensor digitorum lateralis). These muscles were likely reduced in equids during their evolutionary transition from tetradactyl forest-dwellers to monodactyl, open-habitat specialists. Patterns of PCSA across the forelimb were similar between T. indicus and Equus, with the notable exceptions of the biceps brachii and flexor carpi ulnaris, which were much larger in Equus. The differences observed in PCSA between the tapir and horse forelimb muscles highlight muscles that are essential for maintaining stability in the monodactyl limb while moving at high speeds. This quantitative dataset of muscle architecture in a functionally tetradactyl perissodactyl is a pivotal first step towards reconstructing the locomotor capabilities of extinct, four-toed ancestors of modern perissodactyls, and providing further insights into the equid locomotor transition.

Scaling of Anatomically Derived Maximal Bite Force in Primates.

By combining muscle architectural data with biomechanical variables relating to the jaw, we produce anatomically derived maximum bite force estimations for 23 species of catarrhine and platyrrhine primates. We investigate how bite force scales across the sample as a whole (and within each parvorder) relative to two size proxies, body mass and cranial geometric mean, and the effect of diet upon bite force. Bite force is estimated at three representative bite points along the dental row: the first maxillary incisor, canine, and third-most mesial paracone. We modeled bite force by combining calculated physiological cross-sectional area of the jaw adductors from Hartstone-Rose et al. [Anat Rec 301 (2018) 311-324] with osteological measurements of lever- and load-arm lengths from the same specimens [Hartstone-Rose et al., Anat Rec 295 (2012) 1336-1351]. Bite force scales with positive allometry relative to cranial geometric mean across our entire sample and tends toward positive allometry relative to body mass. Bite force tends toward positive allometry within platyrrhines but scales isometrically within catarrhines. There was no statistically significant scaling difference with diet. Our findings imply an absence of a dietary signal in the scaling of bite force, a result that differs from the scaling of physiological cross-sectional area alone. That is, although previous studies have found a dietary signal in the muscle fiber architecture in these species, when these are combined with their leverages, that signal is undetectable. On the parvorder level, our data also demonstrate that the platyrrhine masticatory system appears more mechanically advantageous than that of catarrhines. Anat Rec, 2019. © 2019 American Association for Anatomy Anat Rec, 303:2026-2035, 2020. © 2019 American Association for Anatomy.

Dry versus wet and gross: Comparisons between the dry skull method and gross dissection in estimations of jaw muscle cross-sectional area and bite forces in sea otters.

Bite force is a measure of feeding performance used to elucidate links between animal morphology, ecology, and fitness. Obtaining live individuals for in vivo bite-force measurements or freshly deceased specimens for bite force modeling is challenging for many species. Thomason's dry skull method for mammals relies solely on osteological specimens and, therefore, presents an advantageous approach that enables researchers to estimate and compare bite forces across extant and even extinct species. However, how accurately the dry skull method estimates physiological cross-sectional area (PCSA) of the jaw adductor muscles and theoretical bite force has rarely been tested. Here, we use an ontogenetic series of southern sea otters (Enhydra lutris nereis) to test the hypothesis that skeletomuscular traits estimated from the dry skull method accurately predicts test traits derived from dissection-based biomechanical modeling. Although variables from these two methods exhibited strong positive relationships across ontogeny, we found that the dry skull method overestimates PCSA of the masseter and underestimates PCSA of the temporalis. Jaw adductor in-levers for both jaw muscles and overall bite force are overestimated. Surprisingly, we reveal that sexual dimorphism in craniomandibular shape affects temporalis PCSA estimations; the dry skull method predicted female temporalis PCSA well but underestimates male temporalis PCSA across ontogeny. These results highlight the importance of accounting for sexual dimorphism and other intraspecific variation when using the dry skull method. Together, we found the dry skull method provides an underestimation of bite force over ontogeny and that the underlying anatomical components driving bite force may be misrepresented.

Ontogenetic allometry and architectural properties of the paravertebral and hindlimb musculature in Eastern cottontail rabbits (Sylvilagus floridanus): functional implications for developmental changes in locomotor performance.

Due to small body size, an immature musculoskeletal system, and other growth-related limits on performance, juvenile mammals frequently experience a greater risk of predation than their adult counterparts. As a result, behaviorally precocious juveniles are hypothesized to exhibit musculoskeletal advantages that permit them to accelerate rapidly and evade predation. This hypothesis was tested through detailed quantitative evaluation of muscle growth in wild Eastern cottontail rabbits (Sylvilagus floridanus). Cottontail rabbits experience high rates of mortality during the first year of life, suggesting that selection might act to improve performance in growing juveniles. Therefore, it was predicted that muscle properties associated with force and power capacity should be enhanced in juvenile rabbits to facilitate enhanced locomotor performance. We quantified muscle architecture from 24 paravertebral and hindlimb muscles across ontogeny in a sample of n = 29 rabbits and evaluated the body mass scaling of muscle mass (MM), physiological cross-sectional area (PCSA), isometric force (Fmax ), and instantaneous power (Pinst ), along with several dimensionless architectural indices. In contrast to our hypothesis, MM and PCSA for most muscles change with positive allometry during growth by scaling at Mb1.3 and Mb1.1 , respectively, whereas Fmax and Pinst generally scale indistinguishably from isometry, as do the architectural indices tested. However, scaling patterns indicate that the digital flexors and ankle extensors of juvenile S. floridanus have greater capacities for force and power, respectively, than those in adults, suggesting these muscle properties may be a part of several compensatory features that promote enhanced acceleration performance in young rabbits. Overall, our study implies that body size constraints place larger, more mature rabbits at a disadvantage during acceleration, and that adults must develop hypertrophied muscles in order to maintain mechanical similarity in force and power capacities across development. These findings challenge the accepted understanding that juvenile animals are at a performance detriment relative to adults. Instead, for prey-predator interactions necessitating short intervals of high force and power generation relative to body mass, as demonstrated by rapid acceleration of cottontail rabbits fleeing predators, it may be the adults that struggle to keep pace with juveniles.

Dietary Correlates of Primate Masticatory Muscle Fiber Architecture.

Analyses of masticatory muscle architecture-specifically fascicle length (FL; a correlate of muscle stretch and contraction speed) and physiological cross-sectional area (PCSA; a correlate of force)-reveal soft-tissue dietary adaptations. For instance, consumers of large, soft foods are expected to have relatively long FL, while consumers of obdurate foods are expected to have relatively high PCSA. Unfortunately, only a few studies have analyzed these variables across large primate samples-an order of particular interest because it is our own. Previous studies found that, in strepsirrhines, force variables (PCSA and muscle masses; MM) scale with isometry or slight positive allometry, while the body size corrected FL residuals correlate with food sizes. However, a study of platyrrhines using different methods (in which the authors physically cut muscles between fascicles) found very different trends: negative allometry for both the stretch and force variables. Here, we apply the methods used in the strepsirrhine study (chemical dissection of fascicles to ensure full length measurements) to reevaluate these trends in platyrrhines and extend this research to include catarrhines. Our results conform to the previous strepsirrhine trends: there is no evidence of negative allometry in platyrrhines. Rather, in primates broadly and catarrhines specifically, MM and PCSA scale with isometry or positive allometry. When examining size-adjusted variables, it is clear that fascicle lengths (especially those of the temporalis muscle) correlate with diet: species that consume soft, larger, foods have longer masticatory fiber lengths which would allow them to open their jaws to wider gape angles. Anat Rec, 301:311-324, 2018. © 2018 Wiley Periodicals, Inc.

Multivariate analysis of variations in intrinsic foot musculature among hominoids.

Comparative analysis of the foot muscle architecture among extant great apes is important for understanding the evolution of the human foot and, hence, human habitual bipedal walking. However, to our knowledge, there is no previous report of a quantitative comparison of hominoid intrinsic foot muscle dimensions. In the present study, we quantitatively compared muscle dimensions of the hominoid foot by means of multivariate analysis. The foot muscle mass and physiological cross-sectional area (PCSA) of five chimpanzees, one bonobo, two gorillas, and six orangutans were obtained by our own dissections, and those of humans were taken from published accounts. The muscle mass and PCSA were respectively divided by the total mass and total PCSA of the intrinsic muscles of the entire foot for normalization. Variations in muscle architecture among human and extant great apes were quantified based on principal component analysis. Our results demonstrated that the muscle architecture of the orangutan was the most distinctive, having a larger first dorsal interosseous muscle and smaller abductor hallucis brevis muscle. On the other hand, the gorilla was found to be unique in having a larger abductor digiti minimi muscle. Humans were distinguished from extant great apes by a larger quadratus plantae muscle. The chimpanzee and the bonobo appeared to have very similar muscle architecture, with an intermediate position between the human and the orangutan. These differences (or similarities) in architecture of the intrinsic foot muscles among humans and great apes correspond well to the differences in phylogeny, positional behavior, and locomotion.