A Comparison of Polysorbates and Alternative Surfactants for Interfacial Stress Protection and Mitigation of Fatty Acid Particle Formation in the Presence of an Esterase.

The hydrolysis of polysorbate surfactants in large molecule drug product formulations caused by residual host cell proteins presents numerous stability concerns for pharmaceuticals. The fatty acids (FA) released by polysorbate hydrolysis can nucleate into particulates or challenge the conformational stability of the proteinaceous active pharmaceutical ingredient (API). The loss of intact polysorbate may also leave the Drug Product (DP) vulnerable to interfacial stresses. Polysorbate 20 and 80 are available in several different quality grades (Multi-compendial, Super Refined, Pure Lauric Acid (PLA)/Pure Oleic Acid (POA)). All variations of polysorbate as well as three alternative surfactants: Brij L23, Brij O20 and Poloxamer 188 were compared for their ability to protect against air-water interfacial stresses as well as their risk for developing particulates when in the presence of lipoprotein lipase (LPL) (Pseudomonas). Results show a meaningful difference in the timing and morphology of FA particle formation depending on the type of polysorbate used. All grades of polysorbate, while susceptible to hydrolysis, still offered sufficient protection to interfacial stresses, even when hydrolyzed to concentrations as low as 0.005% (w/v). Alternative surfactants that lack an ester bond were resistant to lipase degradation and showed good protection against shaking stress.

Solid lipid nanoparticle: A potent vehicle of the kaempferol for brain delivery through the blood-brain barrier in the focal cerebral ischemic rat.

Kaempferol is major flavonoid present in Convolvulus pluricaulis. This phytochemical protects the brain against oxidative stress, neuro-inflammation, neurotoxicity, neurodegeneration and cerebral ischemia induced neuronal destruction. Kaempferol is poorly water soluble. Our study proved that solid lipid nanoparticles (SLNs) were efficient carrier of kaempferol through blood-brain barrier (BBB). Kaempferol was incorporated into SLNs prepared from stearic acid with polysorbate 80 by the process of ultrasonication. Mean particle size and zeta potential of kaempferol loaded solid lipid nanoparticles (K-SLNs) were 451.2 nm and -15.0 mV. Atomic force microscopy showed that K-SLNs were spherical in shape. Fourier transformed infrared microscopy (FTIR) showed that both stearic acid and kaempferol were present in K-SLNs. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) revealed that the matrices of K-SLNs were in untidy crystalline state. Entraptment efficiency of K-SLNs was 84.92%. In-vitro drug release percentage was 93.24%. Kaempferol loaded solid lipid nanoparticles (K-SLNs) showed controlled release profile. In-vitro uptake study showed significant efficiency of K-SLNs to cross blood-brain barrier (BBB). After oral administration into the focal cerebral ischemic rat, accumulation of fluorescent labeled K-SLNs was observed in the brain cortex which confirmed its penetrability into the brain. It significantly decreased the neurological deficit, infarct volume and level of reactive oxygen species (ROS) and decreased the level of pro-inflammatory mediators like NF-κB and p-STAT3. Damaged neurons and brain texture were improved. This study indicated increased bioavailability of kaempferol into the brain tissue through SLNs formulation.

Influence of Surfactant on the Skin Permeation of Methylisothiazolinone and Methylchloroisothiazolinone.

Patch tests are often used in safety evaluations to identify the substance causing skin irritation, but the same substance can sometimes give positive or negative results depending on the test conditions. Here, we investigated differences in the skin penetration of two test compounds under different application conditions. We studied the effects of the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic surfactant polysorbate 80 (PS) on skin penetration of the preservatives methylisothiazolinone (MT) and methylchloroisothiazolinone (MCT), which are used in cosmetics such as shampoos. The skin permeation of MT was enhanced by SDS but was unchanged by PS. Skin impedance decreased in the presence of SDS whereas PS had the same effect as the control aqueous solution, suggesting that SDS reduction of the barrier function of skin affects the permeation of MT, a hydrophilic drug. Application of a mixture of MCT and MT in the presence of SDS did not affect the skin permeation of MCT whereas the permeation of MT was enhanced by SDS, indicating that the skin permeation of MCT is less affected by SDS than is MT. Thus, attention should be paid to the possible effect of co-solutes, especially hydrophilic drugs.

Dessecting the toxicological profile of polysorbate 80 (PS80): comparative analysis of constituent variability and biological impact using a zebrafish model.

Polysorbate 80, commonly abbreviated as PS80, is a widely used pharmaceutical excipient renowned for its role as a solubilizer and stabilizer in drug formulations. Although PS80 is essential for various pharmaceutical applications, particularly in the formulation of injectable drugs, it has been implicated in a range of adverse reactions. However, due to the complexity of the composition of PS80, the differences in the types and contents of the constituents of PS80 from different manufacturers increase the probability or likelihood of their uneven quality. Addressing the complete spectrum of PS80's components is challenging; thus, most studies to date have examined PS80 as a singular entity. This approach, however, carries a degree of uncertainty, as it overlooks the unique composition and concentration of components within the PS80 used in experiments, which may not reflect the actual diversity in commercially available PS80 products. Recognizing the critical need to understand how PS80's composition influences biological effects and toxicity, our study aims to bridge this knowledge gap. By doing so, we can clarify how different PS80 compositions from various manufacturers might affect the quality of pharmaceutical formulations, and also guide excipient manufacturers toward producing higher-quality PS80. Such insights could further facilitate a more targeted application of PS80 in drug development. Building on our previous work, we isolated and prepared two key components of PS80-polyoxyethylene sorbitan monooleate (PSM) and polyoxyethylene isosorbide monooleate (PIM)-and conducted a systematic comparison. We evaluated the acute, hemolytic, and target organ toxicity of two different PS80 samples, as well as PSM and PIM, using a zebrafish model. Our research also delved into the potential mechanisms behind the observed toxicological effects, providing an in-depth understanding of PS80's impact on biological systems.The results show that PS80, PSM, and PIM resulted in developmental anomalies in larval zebrafish. The primary organs of acute toxicity in zebrafish exposed to PS80 and its typical components PSM and PIM include the cardiovascular system, kidneys, intestines, skin, and liver. Notably, PIM further induced severe pericardial edema and erythrocyte hemolysis, thereby affecting blood flow. The samples also instigated oxidative damage by disrupting the redox equilibrium in the larvae. Compared to PS80, both PSM and PIM induced greater oxidative damage, with PIM notably causing significantly higher lipid oxidation, suggesting that oxidative stress may play a crucial role in polysorbate80-induced toxicity. Furthermore, our study found that PS80 could induce alterations in DNA conformation. The findings underscore the necessity for excipient regulators to establish comprehensive quality standards for Polysorbate 80 (PS80). By implementing such standards, it is possible to minimize the clinical risks associated with the variability in PS80 composition, ensuring safer pharmaceutical products for patients.

Polysorbate 80 coated chitosan nanoparticles for delivery of α-melanocyte stimulating hormone analog (NDP-MSH) to the brain reverse cognitive impairment related to neuroinflammation produced by a high-fat diet (HFD).

This study aimed to develop polysorbate 80-coated chitosan nanoparticles (PS80/CS NPs) as a delivery system for improved brain targeting of α-Melanocyte Stimulating Hormone analog (NDP-MSH). Chitosan nanoparticles loaded with NDP-MSH were surface-modified with polysorbate 80 ([NDP-MSH]-PS80/CS NP), which formed a flattened layer on their surface. Nanoparticle preparation involved ionic gelation, followed by characterization using scanning electron microscopy (SEM) for morphology, dynamic light scattering (DLS) for colloidal properties, and ATR-FTIR spectroscopy for structure. Intraperitoneal injection of FITC-PS80/CS NPs and [NDP-MSH]-PS80/CS NP in rats demonstrated their ability to cross the blood-brain barrier, reach the brain, and accumulate in CA1 neurons of the dorsal hippocampus within 2 h. Two experimental models of neuroinflammation were employed with Male Wistar rats: a short-term model involving high-fat diet (HFD) consumption for 5 days followed by an immune stimulus with LPS, and a long-term model involving HFD consumption for 8 weeks. In both models, [NDP-MSH]-PS80/CS NPs could reverse the decreased expression of contextual fear memory induced by the diets. These findings suggest that [NDP-MSH]-PS80/CS NPs offer a promising strategy to overcome the limitations of NDP-MSH regarding pharmacokinetics and enzymatic stability. By facilitating NDP-MSH delivery to the hippocampus, these nanoparticles can potentially mitigate the cognitive impairments associated with HFD consumption and neuroinflammation.

Food additives impair gut microbiota from healthy individuals and IBD patients in a colonic in vitro fermentation model.

Intestinal fibrosis is a long-term complication of inflammatory bowel diseases (IBD). Changes in microbial populations have been linked with the onset of fibrosis and some food additives are known to promote intestinal inflammation facilitating fibrosis induction. In this study, we investigated how polysorbate 80, sucralose, titanium dioxide, sodium nitrite and maltodextrin affect the gut microbiota and the metabolic activity in healthy and IBD donors (patients in remission and with a flare of IBD). The Simulator of the Human Intestinal Microbial Ecosystem (SHIME®) with a static (batch) configuration was used to evaluate the effects of food additives on the human intestinal microbiota. Polysorbate 80 and sucralose decreased butyrate-producing bacteria such as Roseburia and Faecalibacterium prausnitzii. Both compounds, also increased bacterial species positively correlated with intestinal inflammation and fibrosis (i.e.: Enterococcus, Veillonella and Mucispirillum schaedleri), especially in donors in remission of IBD. Additionally, polysorbate 80 induced a lower activity of the aryl hydrocarbon receptor (AhR) in the three groups of donors, which can affect the intestinal homeostasis. Maltodextrin, despite increasing short-chain fatty acids production, promoted the growth of Ruminococcus genus, correlated with higher risk of fibrosis, and decreased Oscillospira which is negatively associated with fibrosis. Our findings unveil crucial insights into the potential deleterious effects of polysorbate 80, sucralose and maltodextrin on human gut microbiota in healthy and, to a greater extent, in IBD patients.

Identification of Surfactant Impact on a Monoclonal Antibody Characterization via HPLC-Separation Based and Biophysical Methods.

PURPOSE OR OBJECTIVE: Surfactants, including polysorbates and poloxamers, play a crucial role in the formulation of therapeutic proteins by acting as solubilizing and stabilizing agents. They help prevent protein aggregation and adsorption, thereby enhancing the stability of drug substance and products., However, it is important to note that utilizing high concentrations of surfactants in protein formulations can present significant analytical challenges, which can ultimately affect the product characterization. METHODS: In our study, we specifically investigated the impact of elevated surfactant concentrations on the characterization of monoclonal antibodies. We employed various analytical techniques including size-exclusion chromatography (SEC), capillary electrophoresis (CE-SDS), a cell based functional assay, and biophysical characterization. RESULTS: The findings of our study indicate that higher levels of Polysorbate 80 (PS-80) have adverse effects on the measured purity, biological activity, and biophysical characterization of biologic samples. Specifically, the elevated levels of PS-80 cause analytical interferences, which can significantly impact the accuracy and reliability of analytical studies. CONCLUSIONS: Our study results highlight a significant risk in analytical investigations, especially in studies involving the isolation and characterization of impurities. It is important to be cautious of surfactant concentrations, as they can become more concentrated during common sample manipulations like buffer exchange. Indeed, the research presented in this work emphasizes the necessity to evaluate the impact on analytical assays when there are substantial alternations in the matrix composition. By doing so, valuable insights can be gained regarding potential challenges associated with assay development and characterization of biologics with complex formulations.

Small-angle X-ray scattering unveils the internal structure of lipid nanoparticles.

Lipid nanoparticles own a remarkable potential in nanomedicine, only partially disclosed. While the clinical use of liposomes and cationic lipid-nucleic acid complexes is well-established, liquid lipid nanoparticles (nanoemulsions), solid lipid nanoparticles, and nanostructured lipid carriers have even greater possibilities. However, they face obstacles in being used in clinics due to a lack of understanding about the molecular mechanisms controlling their drug loading and release, interactions with the biological environment (such as the protein corona), and shelf-life stability. To create effective drug delivery carriers and successfully translate bench research to clinical settings, it is crucial to have a thorough understanding of the internal structure of lipid nanoparticles. Through synchrotron small-angle X-ray scattering experiments, we determined the spatial distribution and internal structure of the nanoparticles' lipid, surfactant, and the bound water in them. The nanoparticles themselves have a barrel-like shape that consists of coplanar lipid platelets (specifically cetyl palmitate) that are covered by loosely spaced polysorbate 80 surfactant molecules, whose polar heads retain a large amount of bound water. To reduce the interface cost of bound water with unbound water without stacking, the platelets collapse onto each other. This internal structure challenges the classical core-shell model typically used to describe solid lipid nanoparticles and could play a significant role in drug loading and release, biological fluid interaction, and nanoparticle stability, making our findings valuable for the rational design of lipid-based nanoparticles.

Apolipoprotein E3 functionalized lipid-drug conjugated nanoparticles of Levetiracetam for enhanced delivery to the brain: In-vitro cell line studies and in-vivo study.

A significant portion of brain-tumor patients suffer from 'brain-tumor-related epilepsy (BTE)' which results in depression, anxiety and hampered quality of life. Conventional anti-epileptic drugs indicate negative interaction with other drugs augmenting the poor outcome of overall therapy. Levetiracetam (LVM) has evidenced effectiveness for BTE but its hydrophilicity restricts the passage into blood-brain barrier. The majority of lipid nanoparticles fails to load hydrophilic drug sufficiently. Therefore, lipid-drug conjugates (LDC) were synthesized using stearic acid via amide bond formation confirmed by FTIR and NMR. The nanoparticles of synthesized LDC were prepared by solvent injection method followed by functionalization with Apolipoprotein E3 (ApoE3@LDC-NP). The nanoparticles were characterized by DSC, XRD, particle size (131.6 ± 1.24 nm), zeta potential (-15.6 ± 0.09 mV), and for storage stability. In-vitro release study indicated initial burst release of 20 ± 0.63 % followed by sustained release up to 30 h (66 ± 1.40 %) for ApoE3@LDC-NP. The cell-line study on HEK293 indicated no significant cytotoxic effect and greater cell uptake through U87MG cell line. The pharmacokinetic and bio-distribution study indicated 2.5-fold greater brain-targeting of ApoE3@LDC-NP as compared to LVM solution. It proved safe in the haemolysis study and exhibited the absence of tissue necrosis. Thus, ApoE3@LDC-NP might be a promising approach for effective brain-targeting of LVM for improved clinical response in BTE.

Effects of food emulsifiers on high fat-diet-induced obesity, intestinal inflammation, changes in bile acid profile, and liver dysfunction.

Obesity has become one of the most prevalent health concerns of our time. A long-term high-fat diet is closely related to obesity. Food emulsifiers are incorporated into high-fat foods to enhance the texture and stability. Whether food emulsifiers exacerbate obesity and metabolic disorders induced by a high-fat diet remains unclear. This study aimed to investigate the effects of polysorbate-80 (P80) and polyglycerol polyricinoleate (PGPR) on lipid metabolism, bile acid profile, and gut microbiota in normal and high-fat-diet-induced obesity in mice. The results of this study showed that P80 and PGPR had little effect on body weight but significantly increased epididymal-fat weight, total energy intake, and blood lipid levels. P80 and PGPR stimulated colon inflammation and improved the expression of inflammatory factors in the colon and liver significantly. P80 and PGPR changed the bile acid profile. However, P80 and PGPR did not aggravate inflammation, obesity and alter bile acid profile by altering the composition of the gut microbiota. The results of this study provide an experimental reference for the rational use of food additives and the adjustment of dietary structure, which are important and have application value.

Polysorbate 80 surface modified PLGA nanoparticles: an in-vitro evaluation of cellular uptake and cytotoxicity on neuro-2a cells.

AIM: Present study focuses on the development of P80 coated PLGA Nanoparticles loaded with drugs, paroxetine (P80-Par-PLGA-NPs) and clonidine (P80-CLD-PLGA-NPs) for in-vitro evaluation of Cellular Uptake & Cytotoxicity on Neuro-2a cells. METHOD: P80-Par-PLGA-NPs and P80-CLD-PLGA-NPs were developed and characterised for zeta size, potential, PDI, EE%, DL%, TEM, SEM, FTIR, DSC, in-vitro release, cytotoxicity, histopathological and cell uptake studies using rhodamine loaded P80-NPs. RESULT: Mean particle diameter of P80-Par-PLGA-NPs and P80-CLD-PLGA-NPs was 204; 182.7 nm, ZP of -21.8; -18.72 mV and 0.275; 0.341 PDI, respectively. TEM and SEM images revealed homogenous surface morphology. In-vitro drug release showed sustained and complete release in 72 h. Cell viability (>90%) at Cmax and no cytotoxicity in histopathology was observed. Significant higher uptake (96.9%) of P80-modified-NPS was observed as compared to unmodified-NPs (81%) (p < 0.05). CONCLUSION: The finding clearly indicated a higher cell uptake of drugs via surface modified P80-coated PLGA-NPs as compared to unmodified particles.

Mechanisms of gut epithelial barrier impairment caused by food emulsifiers polysorbate 20 and polysorbate 80.

BACKGROUND: The rising prevalence of many chronic diseases related to gut barrier dysfunction coincides with the increased global usage of dietary emulsifiers in recent decades. We therefore investigated the effect of the frequently used food emulsifiers on cytotoxicity, barrier function, transcriptome alterations, and protein expression in gastrointestinal epithelial cells. METHODS: Human intestinal organoids originating from induced pluripotent stem cells, colon organoid organ-on-a-chip, and liquid-liquid interface cells were cultured in the presence of two common emulsifiers: polysorbate 20 (P20) and polysorbate 80 (P80). The cytotoxicity, transepithelial electrical resistance (TEER), and paracellular-flux were measured. Immunofluorescence staining of epithelial tight-junctions (TJ), RNA-seq transcriptome, and targeted proteomics were performed. RESULTS: Cells showed lysis in response to P20 and P80 exposure starting at a 0.1% (v/v) concentration across all models. Epithelial barrier disruption correlated with decreased TEER, increased paracellular-flux and irregular TJ immunostaining. RNA-seq and targeted proteomics analyses demonstrated upregulation of cell development, signaling, proliferation, apoptosis, inflammatory response, and response to stress at 0.05%, a concentration lower than direct cell toxicity. A proinflammatory response was characterized by the secretion of several cytokines and chemokines, interaction with their receptors, and PI3K-Akt and MAPK signaling pathways. CXCL5, CXCL10, and VEGFA were upregulated in response to P20 and CXCL1, CXCL8 (IL-8), CXCL10, LIF in response to P80. CONCLUSIONS: The present study provides direct evidence on the detrimental effects of food emulsifiers P20 and P80 on intestinal epithelial integrity. The underlying mechanism of epithelial barrier disruption was cell death at concentrations between 1% and 0.1%. Even at concentrations lower than 0.1%, these polysorbates induced a proinflammatory response suggesting a detrimental effect on gastrointestinal health.

Maternal polysorbate 80 exposure causes intestinal ILCs and CD4+ T cell developmental abnormalities in mouse offspring.

This study aimed to investigate the transgenerational impacts of maternal intake of polysorbate 80 (P80), an emulsifier widely used in modern society, on the development of offspring immunity. Our results revealed that maternal P80 treatment led to impaired differentiation of innate lymphoid cells (ILCs) and CD4+ T cells in the small intestinal lamina propria (SiLP), resulting in intestinal dyshomeostasis in female offspring. Furthermore, we found that SiLP ILCs abundances were significantly altered in 0-day-old fetuses from P80-treated mothers, indicating a prenatal impact of P80-treated mothers on offspring immunity. Additionally, cesarean section and foster-nursing studies demonstrated that P80-induced altered SiLP ILCs in 0-day-old fetuses could further induce dysregulation of ILCs and CD4+ T cells in the SiLP, thus promoting intestinal dysregulation in offspring later in life. Overall, our findings suggest that maternal P80 intake could prenatally program the development of offspring immunity, exerting a significant and long-lasting impact.

The effect of polysorbate 20 and polysorbate 80 on the solubility of quercetin.

Background: Quercetin acts as an antioxidant, anti-inflammatory, wound healing, and anti-aging so quercetin can be used as a topical preparation. However, it has low solubility in water at 0.01 mg/ml at 25oC. Increasing the solubility of quercetin in water was done by the addition of surfactants. Objective: This study compared the solubility of quercetin in Polysorbate 20 (P20) and Polysorbate 80 (P80) in a citrate buffer medium pH 4.5±0.2. Methods: The surfactants Polysorbate 80 and Polysorbate 20 differ in their alkyl chain length. Polysorbate 80 has an alkyl chain length of 18, while Polysorbate 20 has an alkyl chain length of 12. The concentrations of surfactant are above, below, and at the critical micelle concentration (CMC) values. The concentrations of quercetin were determined at the maximum wavelength by spectrophotometric method. Results: The results of the quercetin solubility test without surfactant were 3.89±0.59 mg/L. The results of the quercetin solubility test by adding Polysorbate 20 at a concentration of 42.0 ppm; 57.5 ppm; and 73.0 ppm were 3.62±0.72, 4.04±0.23 and 8.35±1.97 mg/L, respectively. While the solubility of quercetin by adding Polysorbate 80 at a concentration of 4.0 ppm, 11.5 ppm, and 19.0 ppm was 11.15±0.72, 11.37±1.23 and 14.17±1.96 mg/L, respectively. The solubility of quercetin is greater after the addition of surfactant Polysorbate 20 only at the concentration above the CMC value and the solubility of quercetin is greater with the addition of surfactant Polysorbate 80 at all concentrations. Surfactant Polysorbate 20 increases the solubility of quercetin in citrate buffer pH 4.5±0.2 only at concentrations above the CMC value of 2.14 times. Polysorbate 80 can increase the solubility of quercetin in citrate buffer pH 4.5±0.2 at concentrations below, at, and above CMC by 2.87, 2.92, and 3.63 times, respectively. Conclusion: Polysorbate 80 can increase the solubility of quercetin in citrate buffer pH 4.5±0.2 higher than Polysorbate 20.

Drying behaviour and visualization of surfactants after co-spray drying of surfactant-stabilized aqueous suspensions.

Surfactants are widely used in many industries as dispersants or flocculants for suspensions. As the addition of low concentrations of surfactant is sufficient to execute their effect, they barely alter the formulation composition. In this research it was examined whether surfactants, in particular polysorbate 80 (PS80), were suitable as suspension stabilizers for co-spray drying of drug-filler combinations. Therefore, their drying behaviour at different process and formulation settings was studied and mapped by means of fluorescently labelled PS80. Co-spray drying of 10% w/w aqueous suspensions stabilized with 0.1% w/w PS80 resulted in excessive loss of sticky powder in the conical lower part of the drying chamber and the powder conveyor ducts. Up to 16% of powder was lost in the first transporter (i.e. the first part of the conveyor ducts). The amount of powder deposited in the first transporter, and by extension the stickiness of the recovered powder, was correlated with the presence of PS80 on the surface of the spray dried particles. Redistribution of free surfactant molecules during droplet drying depended on the process and formulation parameters. Enrichment of PS80 at the particle surface was most pronounced after co-spray drying of liquid feedstocks with low suspended fraction at process conditions favouring rapid droplet drying.

Endotyping of IgE-Mediated Polyethylene Glycol and/or Polysorbate 80 Allergy.

BACKGROUND: Polyethylene glycol (PEG) and polysorbate 80 (PS80) allergy preclude from SARS-CoV-2 vaccination. The mechanism(s) governing cross-reactivity and PEG molecular weight dependence remain unclear. OBJECTIVES: To evaluate PEGylated lipid nanoparticle (LNP) vaccine (BNT162b2) tolerance and explore the mechanism of reactivity in PEG and/or PS80 allergic patients. METHODS: PEG/PS80 dual- (n = 3), PEG mono- (n = 7), and PS80 mono-allergic patients (n = 2) were included. Tolerability of graded vaccine challenges was assessed. Basophil activation testing on whole blood (wb-BAT) or passively sensitized donor basophils (allo-BAT) was performed using PEG, PS80, BNT162b2, and PEGylated lipids (ALC-0159). Serum PEG-specific IgE was measured in patients (n = 10) and controls (n = 15). RESULTS: Graded BNT162b2 challenge in dual- and PEG mono-allergic patients (n = 3/group) was well tolerated and induced anti-spike IgG seroconversion. PS80 mono-allergic patients (n = 2/2) tolerated single-dose BNT162b2 vaccination. Wb-BAT reactivity to PEG-containing antigens was observed in dual- (n = 3/3) and PEG mono- (n = 2/3), but absent in PS80 mono-allergic patients (n = 0/2). BNT162b2 elicited the highest in vitro reactivity. BNT162b2 reactivity was IgE mediated, complement independent, and inhibited in allo-BAT by preincubation with short PEG motifs, or detergent-induced LNP degradation. PEG-specific IgE was only detectable in dual-allergic (n = 3/3) and PEG mono-allergic (n = 1/6) serum. CONCLUSION: PEG and PS80 cross-reactivity is determined by IgE recognizing short PEG motifs, whereas PS80 mono-allergy is PEG-independent. PS80 skin test positivity in PEG allergics was associated with a severe and persistent phenotype, higher serum PEG-specific IgE levels, and enhanced BAT reactivity. Spherical PEG exposure via LNP enhances BAT sensitivity through increased avidity. All PEG and/or PS80 excipient allergic patients can safely receive SARS-CoV-2 vaccines.

Investigation of excipients impact on polysorbate 80 degradation in biopharmaceutical formulation buffers.

A study on the polysorbate 80 stability in various formulation buffers commonly used in biopharmaceuticals was performed, to investigate the excipients influence on polysorbate 80 degradation. Polysorbate 80 is a common excipient in biopharmaceutical products. However, its degradation will potentially impact the drug product quality, and may trigger protein aggregation and particles formation. Due to the heterogeneity of the polysorbates and the mutual effects with other formulation compositions, the study of polysorbate degradation is challenging. Herein, a real-time stability study was designed and performed. The polysorbate 80 degradation trend was monitored by fluorescence micelle-based assay (FMA), reversed-phase-ultra-performance liquid chromatography-evaporative light scattering detector (RP-UPLC-ELSD) assay, and LC-MS assay. These assays provide orthogonal results to reveal both the micelle-forming capability and the compositional changes of polysorbate 80 in different buffer systems. The degradation occurred after a period of storage under 25 °C in different trend, which indicates the excipients could impact the degradation kinetics. Upon comparison, the degradation is prone to happen in histidine buffer than in acetate, phosphate or citrate buffers. LC-MS confirms oxidation as an independent degradation pathway with detection of the oxidative aldehyde. Thus, it is necessary to pay more attention to the excipients selection and their potential impact on polysorbate 80 stability to achieve longer shelf life for the biopharmaceuticals. Besides, the protective roles of several additives were figured out, which could be applied as potential industrial solutions to the polysorbate 80 degradation issues.

Updated guidance regarding the risk of allergic reactions to COVID-19 vaccines and recommended evaluation and management: A GRADE assessment and international consensus approach.

This guidance updates 2021 GRADE (Grading of Recommendations Assessment, Development and Evaluation) recommendations regarding immediate allergic reactions following coronavirus disease 2019 (COVID-19) vaccines and addresses revaccinating individuals with first-dose allergic reactions and allergy testing to determine revaccination outcomes. Recent meta-analyses assessed the incidence of severe allergic reactions to initial COVID-19 vaccination, risk of mRNA-COVID-19 revaccination after an initial reaction, and diagnostic accuracy of COVID-19 vaccine and vaccine excipient testing in predicting reactions. GRADE methods informed rating the certainty of evidence and strength of recommendations. A modified Delphi panel consisting of experts in allergy, anaphylaxis, vaccinology, infectious diseases, emergency medicine, and primary care from Australia, Canada, Europe, Japan, South Africa, the United Kingdom, and the United States formed the recommendations. We recommend vaccination for persons without COVID-19 vaccine excipient allergy and revaccination after a prior immediate allergic reaction. We suggest against >15-minute postvaccination observation. We recommend against mRNA vaccine or excipient skin testing to predict outcomes. We suggest revaccination of persons with an immediate allergic reaction to the mRNA vaccine or excipients be performed by a person with vaccine allergy expertise in a properly equipped setting. We suggest against premedication, split-dosing, or special precautions because of a comorbid allergic history.

Clozapine-loaded nanocapsules improve antipsychotic activity in rats: building a sequential PopPK/PD model to discriminate nanocarriers in the preformulation step.

PURPOSE: We investigated the impact of nanoformulations on the dose-exposure-response relationship of clozapine (CZP), a low-solubility antipsychotic with serious adverse effects, using a popPK/PD approach. METHODS: We evaluated the pharmacokinetics and PK/PD profiles of three coated polymeric CZP-loaded nanocapsules functionalized with polysorbate 80 (NCP80), polyethylene glycol (NCPEG), and chitosan (NCCS). Data on in vitro CZP release by dialysis bag, plasma pharmacokinetic profiles in male Wistar rats (n = 7/group, 5 mg kg-1, i.v.), and percentage of head movements in a stereotyped model (n = 7/group, 5 mg kg-1, i.p.) were integrated using a sequential model building approach (MonolixSuiteTM-2020R1-Simulation Plus). RESULTS: A base popPK model developed with CZP solution data collected after the i.v. administration of CZP was expanded to describe the changes in drug distribution caused by nanoencapsulation. Two additional compartments were inserted into the NCP80 and NCPEG models, and a third compartment was included in the NCCS model. The nanoencapsulation showed a decrease in the central volume of distribution for NCCS (V1NCpop = 0.21 mL), while for FCZP, NCP80, and NCPEG, it was ~1 mL. The peripheral distribution volume was higher for the nanoencapsulated groups (19.1 and 129.45 mL for NCCS and NCP80, respectively) than for FCZP. The popPK/PD model showed a formulation-dependent plasma IC50, with 20-, 50-, and 80-fold reductions compared to the CZP solution (NCP80, NCPEG, and NCCS, respectively). CONCLUSION: Our model discriminates the coatings and describes the peculiar PK and PD behavior of nanoencapsulated CZP, especially NCCS, making it an exciting tool for evaluating the preclinical performance of nanoparticles.

Polysorbate 80-coated albumin nanoparticles to deliver paclitaxel into the brain to treat glioma.

Aim: To develop stable paclitaxel (PTX)-loaded bovine serum albumin (BSA) nanoparticles (BSA-NPs-PTX) as drug-delivery vehicles for delivering paclitaxel into the brain to treat glioma. Methods: This study used PTX-loaded BSA NPs coated with polysorbate 80 (Ps 80) to enhance PTX concentration in the brain. Results: The low IC50 indicated that the fabricated BSA-NPs-PTX and BSA-NPs-PTX-Ps 80 showed significantly enhanced cytotoxicity. The pharmacokinetic and biodistribution analysis of BSA-NPs-PTX and BSA-NPs-PTX 80 showed comparable pharmacokinetic profiles but were significantly different compared with free PTX. Conclusion: BSA-NPs-PTX-Ps 80 exhibited higher plasma concentration-time curves, as compared with BSA-NPs-PTX and PTX. BSA-NPs-PTX and BSA-NPs-PTX-Ps 80 showed significantly improved PTX distribution in the frontal cortex, posterior brain and cerebellum.