Effect of lysozyme combined with hydrothermal pretreatment on excess sludge and anaerobic digestion.

Anaerobic digestion (AD) is widely employed for sludge stabilization and waste reduction. However, the slow hydrolysis process hinders methane production and leads to prolonged sludge issues. In this study, an efficient and eco-friendly lysozyme pre-treatment method was utilized to address these challenges. By optimizing lysozyme dosage, hydrolysis and cell lysis were maximized. Furthermore, lysozyme combined with hydrothermal pretreatment enhanced overall efficiency. Results indicate that: (1) When lysozyme dosage reached 90 mg/g TS after 240 min of pretreatment, SCOD, soluble polysaccharides, and protein content reached their maxima at 855.00, 44.09, and 204.86 mg/L, respectively. This represented an increase of 85.87%, 365.58%, and 259.21% compared to the untreated sludge. Three-dimensional fluorescence spectroscopy revealed the highest fluorescence intensity in the IV region (soluble microbial product), promoting microbial metabolic activity. (2) Lysozyme combined with hydrothermal pretreatment significantly increased SCOD, soluble proteins, and polysaccharide release from sludge, reducing SCOD release time. Orthogonal experiments identified Group 3 as the most effective for SCOD and soluble polysaccharide release, while Group 9 released the most soluble proteins. The significance order of factors influencing SCOD, soluble proteins, and polysaccharide release is hydrothermal temperature > hydrothermal time > enzymatic digestion time.(3) The lysozyme-assisted hydrothermal pretreatment group exhibited the fastest release and the highest SCOD concentration of 8,135.00 mg/L during anaerobic digestion. Maximum SCOD consumption and cumulative gas production increased by 95.89% and 130.58%, respectively, compared to the control group, allowing gas production to conclude 3 days earlier.

Iron-promoted zirconia-alumina supported Ni catalyst for highly efficient and cost-effective hydrogen production via dry reforming of methane.

Developing cost-effective and high-performance catalyst systems for dry reforming of methane (DRM) is crucial for producing hydrogen (H2) sustainably. Herein, we investigate using iron (Fe) as a promoter and major alumina support in Ni-based catalysts to improve their DRM performance. The addition of iron as a promotor was found to add reducible iron species along with reducible NiO species, enhance the basicity and induce the deposition of oxidizable carbon. By incorporating 1 wt.% Fe into a 5Ni/10ZrAl catalyst, a higher CO2 interaction and formation of reducible "NiO-species having strong interaction with support" was observed, which led to an ∼80% H2 yield in 420 min of Time on Stream (TOS). Further increasing the Fe content to 2wt% led to the formation of additional reducible iron oxide species and a noticeable rise in H2 yield up to 84%. Despite the severe weight loss on Fe-promoted catalysts, high H2 yield was maintained due to the proper balance between the rate of CH4 decomposition and the rate of carbon deposit diffusion. Finally, incorporating 3 wt.% Fe into the 5Ni/10ZrAl catalyst resulted in the highest CO2 interaction, wide presence of reducible NiO-species, minimum graphitic deposit and an 87% H2 yield. Our findings suggest that iron-promoted zirconia-alumina-supported Ni catalysts can be a cheap and excellent catalytic system for H2 production via DRM.

Integrity at stake: confronting "publish or perish" in the developing world and emerging economies.

The scientific community faces significant ethical challenges due to the "publish or perish" culture, particularly in developing and emerging economies. This paper explores the widespread unethical practices in scientific publishing, including the sale of authorships, the proliferation of "paper mills," and the misuse of artificial intelligence to produce fraudulent research. These practices undermine the integrity of scientific research, skew publication metrics, and distort academic rankings. This study examines various instances of academic fraud, emphasizing the impact on low-income countries, with specific cases from Latin America. Recommendations include stricter verification of authorship, disciplinary measures for scientific fraud, and policies promoting transparency and accountability in research. Addressing these challenges is crucial for maintaining the integrity and credibility of scientific endeavors globally.

Fast Reduction of 4-Nitrophenol and Photoelectrochemical Hydrogen Production by Self-Reduced Bi/Ti3C2Tx/Bi2S3 Nanocomposite: A Combined Experimental and Theoretical Study.

The distinctive properties of 2D MXenes have garnered significant interest across various fields, including wastewater treatment and photo/electro-catalysis. The integration of inexpensive semiconductor nanostructures with 2D MXenes offers a promising strategy for applications such as wastewater treatment and photoelectrochemical hydrogen production. In this study, we employed an in situ hydrothermal method to immobilize 1D Bi2S3 nanorods and self-reduced metallic bismuth nanoparticles (Bi NPs) onto Ti3C2Tx MXene nanosheets, resulting in the formation of a Bi/Bi2S3/Ti3C2Tx (0D/1D/2D) composite catalyst, which demonstrates an outstanding efficacy in both the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) and photoelectrochemical hydrogen production. Remarkably, a 4-NP reduction efficiency of 100% was achieved only in 4 min with a reduction rate of 1.14 min-1, which is outstanding, and it is ∼3.8 times faster than pristine Bi2S3 nanorods (0.3 min-1). Furthermore, the photoelectrochemical assessment reveals that the Bi/Bi2S3/Ti3C2Tx catalyst displays remarkable hydrogen evolution reaction (HER) efficiency in an alkaline electrolyte. It exhibits a significantly lower overpotential and Tafel slope of 73 mV and 84 mV/dec, respectively, compared to pristine Bi2S3 nanorods, which are found to be 129 mV and 145 mV/dec under light illumination. The superior reduction performance of 4-NP and charge transfer mechanism is further investigated through density functional theory (DFT) calculations, alongside validation using various microscopic and spectroscopic techniques. Interestingly, the DFT analysis revealed modifications in the partial density of states of Bi2S3 within the band gap region due to the successful anchoring of Ti3C2Tx nanosheets and metallic Bi NPs, facilitating efficient charge transport and separation across the local junctions. Ultraviolet photoelectron spectroscopy provided insights into band alignment and interfacial charge transfer across the Bi/Bi2S3/Ti3C2Tx junction on a microscopic scale. This work is significant for the development of MXene-based hybrid catalysts, and it provides a deeper understanding of the reduction mechanism of organic pollutants and superior charge transport in the hybrid system for photoelectrochemical hydrogen production.

Quantifying HONO Production from Nitrate Photolysis in a Polluted Atmosphere.

The photolysis of particulate nitrate (pNO3-) has been suggested to be an important source of nitrous acid (HONO) in the troposphere. However, determining the photolysis rate constant of pNO3- (jpNO3-) suffers from high uncertainty. Prior laboratory measurements of jpNO3- using aerosol filters have been complicated by the "shadow effect"─a phenomenon of light extinction within aerosol layers that potentially skews these measurements. We developed a method to correct the shadow effect on the photolysis rate constant of pNO3- for HONO production (jpNO3- â†’ HONO) using aerosol filters with identical chemical compositions but different aerosol loadings. We applied the method to quantify jpNO3- â†’ HONO over the North China Plain (NCP) during the winter haze period. After correcting for the shadow effect, the normalized average jpNO3- â†’ HONO at 5 °C increased from 5.89 × 10-6 s-1 to 1.72 × 10-5 s-1. The jpNO3- â†’ HONO decreased with increasing pH and nitrate proportions in PM2.5 and had no correlation with nitrate concentrations. A parametrization for jpNO3- â†’ HONO was developed for model simulation of HONO production in NCP and similar environments.

Validation of Serbian version of the LittlEARS® Early Speech Production Questionnaire for the assessment of early language development in typically developing children.

OBJECTIVE: The LittlEARS® Early Speech Production Questionnaire (LEESPQ) was developed to provide professionals with valuable information about children's earliest language development and has been successfully validated in several languages. This study aimed to validate the Serbian version of the LEESPQ in typically developing children and compare the results with validation studies in other languages. METHODS: The English version of the LEESPQ was back-translated into Serbian. Parents completed the questionnaire in paper or electronic form either during the visit to the paediatric clinic or through personal contact. A total of 206 completed questionnaires were collected. Standardized expected values were calculated using a second-order polynomial model for children up to 18 months of age to create a norm curve for the Serbian language. The results were then used to determine confidence intervals, with the lower limit being the critical limit for typical speech-language development. Finally, the results were compared with German and Canadian English developmental norms. RESULTS: The Serbian LEESPQ version showed high homogeneity (r = .622) and internal consistency (α = .882), indicating that it almost exclusively measures speech production ability. No significant difference in total score was found between male and female infants (U = 4429.500, p = .090), so it can be considered a gender-independent questionnaire. The results of the comparison between Serbian and German (U = 645.500, p = .673) and Serbian and English norm curves (U = 652.000, p = .725) show that the LEESPQ can be applied to different population groups, regardless of linguistic, cultural or sociological differences. CONCLUSION: The LEESPQ is a valid, age-dependent and gender-independent questionnaire suitable for assessing early speech development in children aged from birth to 18 months.

Photothermal oxidative dehydrogenation of propane to propylene over Cu/BN catalysts.

Oxidative dehydrogenation of propane (ODHP) is a reaction with significant practical significance. As for the industrial application of ODHP, it is challenging to achieve high activity and high propylene selectivity simultaneously. In this study, to overcome this obstacle, we designed a series of Cu/BN catalysts with unique morphologies for establishing a photothermal ODHP system with high efficiency and selectivity. Characterization and evaluation results revealed that Cu/BN-NS and Cu/BN-NF with enlarged specific surface areas exhibited higher catalytic activities. The localized surface plasmon resonance (LSPR) effect of Cu nanoparticles further enhanced the photothermal catalytic performances of Cu/BN catalysts under visible light irradiation. To the best of our knowledge, it is the first time to establish a BN-based photothermal ODHP catalytic system. This study is expected to pave pathways to realize high activity and propylene selectivity for the practical application of ODHP.

Tracing Nitrogen Flows Associated with Beef Supply Chains: A Consumption-Based Assessment.

While highly connected food chains provide numerous benefits, they lack traceability and transparency. As such, understanding the spatial heterogeneity in their environmental burdens is critical for targeted interventions. This is especially important for nutrient-related impacts such as nitrogen since the release of reactive nitrogen has been linked to loss of biodiversity and decrease in water quality in different parts of the world. Animal feed production is heavily dependent on synthetic fertilizers, and the consumption of beef products, in particular, is associated with high nitrogen footprints. Although there is a rich body of work on nutrient footprints of beef production, there is a gap in understanding the spatial distribution of the nutrient releases throughout the beef supply chain in the U.S. We present an optimization-based framework to trace supply chain networks of beef products at the county level. Using publicly available data, we construct a weighted network of nutrient flows based on mass balance, including synthetic fertilizers, manure production, and crop uptake and residues. The results show that beef consumption in a county can be associated with nitrogen losses in hundreds of counties. One year worth of beef consumption in the United States released approximately 1.33 teragrams (Tg) of N to the environment, and most of it as diffuse pollution during the feed production phase. Analysis also revealed the huge disparity between consumption-based and production-based impacts of beef and the need for considering consumption-based accounting in discourse around the environmental sustainability of food systems.

Cyclotron production of manganese-52: a promising avenue for multimodal PET/MRI imaging.

BACKGROUND: The integration of positron emission tomography (PET) and magnetic resonance imaging (MRI) holds promise for advancing diagnostic imaging capabilities. The METRICS project aims to develop cyclotron-driven production of 52Mn for PET/MRI imaging. RESULTS: Using the 52Cr(p,n)52Mn reaction, we designed chromium metal targets via Spark Plasma Sintering and developed a separation procedure for isolating 52Mn. Labeling tests were conducted with traditional chelators (i.e. S-2-(4-Isothiocyanatobenzyl)-1,4,7,10-tetraazacyclododecane tetraacetic acid) and the 1.4-dioxa-8-azaspiro[4.5]decane-8- carbodithioate ligand to produce radioactive complexes suitable for PET/MRI applications. Our methodology yielded high-quality 52Mn suitable for PET radiopharmaceuticals and PET/MRI imaging. Preliminary studies on phantom imaging using microPET and clinical MRI demonstrated the efficacy of our approach. CONCLUSIONS: The developed technology offers a promising avenue for producing 52Mn and enhancing PET/MRI imaging capabilities. Further in vivo investigations are warranted to evaluate the potential advantages of this hybrid imaging technique.

S-scheme carbon doped-TiO2/ZnIn2S4 heterojunction for enhanced photocatalytic degradation of microcystin-LR and hydrogen evolution.

Photocatalytic degradation of pollutants coupled with hydrogen (H2) evolution has emerged as a promising solution for environmental and energy crises. However, the fast recombination of photoexcited electrons and holes limits photocatalytic activities. Herein, an S-scheme heterojunction carbon doped-TiO2 /ZnIn2S4 (C-TiO2/ZnIn2S4) was designed by substituting oxygen sites within C-TiO2 by ZnIn2S4. Under visible light irradiation, the optimal C-TiO2/ZnIn2S4 exhibits a higher degradation efficiency (88.6%) of microcystin-LR (MC-LR), compared to pristine C-TiO2 (72.9%) and ZnIn2S4 (66.8%). Furthermore, the H2 yield of the C-TiO2/ZnIn2S4 reaches 1526.9 µmol·g-1·h-1, which is 3.83 times and 2.87 times that of the C-TiO2 and ZnIn2S4, respectively. Experimental and theoretical investigations reveal that an internal electric field (IEF) informed in the C-TiO2/ZnIn2S4 heterojunction, accelerates the separation of photogenerated charge pairs, thereby enhancing photocatalytic efficiency of MC-LR degradation and H2 production. This work highlights a new perspective on the development of high-performance photocatalysts for wastewater treatment and H2 generation.

The sands of time: Discontinuity in time production, or inadequacy of psychophysical fit?

In a recent study employing time production, a number of participants presented aberrant data, which normally would have marked them as being outliers. Given the ongoing discussion in the literature regarding the illusory nature of the flow of time, in this paper we consider whether their data may indicate discontinuity in time perception. We analyze the log-log plots for these outliers, investigating to what degree linearity is preserved for all the data points, as opposed to achieving a better fit using bisegmental regression. The current results, though preliminary, can contribute to the debate regarding the non-linearity of subjective time. It would seem that with longer target durations, the ongoing experience of time can be either one of a subjective slowing down of time (longer time units, increase in slope), or of a subjective speeding up of time (shorter time units, decrease in slope).

Characterization and application of Bacillus velezensis D6 co-producing α-amylase and protease.

BACKGROUND: Research on the co-production of multiple enzymes by Bacillus velezensis as a novel species is still a topic that needs to be studied. This study aimed to investigate the fermentation characteristics of B. velezensis D6 co-producing α-amylase and protease and to explore their enzymatic properties and applications in fermentation. RESULTS: The maximum co-production of α-amylase and protease reached 13.13 ± 0.72 and 2106.63 ± 64.42 U mL-1, respectively, under the optimal fermented conditions (nutrients: 20.0 g L-1 urea, 20.0 g L-1 glucose, 0.7 g L-1 MnCl2; incubation conditions: initial pH 7.0, temperature 41 °C, 8% inoculation size and 30% working volume). Moreover, the genetic co-expression of α-amylase and protease increased from 0 to 24 h and then decreased after 36 h at the transcriptional level, which coincided with the growth trend of B. velezensis D6. The optimal reaction temperature of α-amylase was 55-60 °C, while that of protease was 35-40 °C. The activities of α-amylase and protease were retained by over 80% after thermal treatment (90 °C, 1 h), which indicated that two enzymes co-produced by B. velezensis D6 demonstrated excellent thermal stability. Moreover, the two enzymes were stable over a wide pH range (pH 4.0-8.0 for α-amylase; pH 4.0-9.0 for protease). Finally, the degrees of hydrolysis of corn, rice, sorghum and soybeans by α-amylase from B. velezensis D6 reached 44.95 ± 2.95%, 57.16 ± 2.75%, 52.53 ± 4.01% and 20.53 ± 2.42%, respectively, suggesting an excellent hydrolysis effect on starchy raw materials. The hydrolysis degrees of mackerel heads and soybeans by protease were 43.93 ± 2.19% and 26.38 ± 1.72%, respectively, which suggested that the protease from B. velezensis D6 preferentially hydrolyzed animal-based protein. CONCLUSION: This is a systematic study on the co-production of α-amylase and protease by B. velezensis D6, which is crucial in widening the understanding of this species co-producing multi-enzymes and in exploring its potential application. © 2024 Society of Chemical Industry.

Electron-Efficient Co-electrosynthesis of Formates from CO2 and Methanol Feedstocks.

The electrochemical conversion of CO2 into valuable chemicals using renewable electricity shows significant promise for achieving carbon neutrality and providing alternative energy storage solutions. However, its practical application still faces significant challenges, including high energy consumption, poor selectivity, and limited stability. Here, we propose a hybrid acid/alkali electrolyzer that couples the acidic CO2 reduction reaction (CO2RR) at the cathode with alkaline methanol oxidation reaction (MOR) at the anode. This dual electro-synthesis cell is implemented by developing Bi nanosheets as cathode catalysts and oxide-decorated Cu2Se nanoflowers as anode catalysts, enabling high-efficiency electron utilization for formate production with over 180% coulombic efficiency and more than 90% selectivity for both CO2RR and MOR conversion. The hybrid acid/alkali CO2RR-MOR cell also demonstrates long-term stability exceeding 100 hours of continuous operation, delivers a formate partial current density of 130 mA cm-2 at a voltage of only 2.1 V, and significantly reduces electricity consumption compared to the traditional CO2 electrolysis system. This study illuminates an innovative electron-efficiency and energy-saving techniques for CO2 electrolysis, as well as the development of highly efficient electrocatalysts.

Uranium mining effluents: What about the re-use of mining wastes to improve the bioproduction of industrially relevant bioactive compounds?

The shift towards a circular economy, where waste generation is minimized through waste re-use and the development of valorization strategies, is crucial for the establishment of a low carbon, sustainable, and resource-efficient economy. However, there is a lack of strategies for re-using and valorizing specific types of waste, particularly those containing naturally occurring radioactive materials (NORM), despite the prevalence of industrial activities that produce such waste due to their chemical and radiological hazards. Living organisms, including fungi, are valuable sources of bioactive compounds with various industrial applications. In this study, we assessed the growth and metabolic profile changes of three white rot fungi species in response to low concentrations of a uranium mine effluent containing NORM and metals to explore their potential for producing biotechnologically relevant bioactive compounds. The growth rate was assessed in three different culture media, with and without the uranium mine effluent (1% V/V)), and the metabolic profile was analyzed using FTIR-ATR spectroscopy. Results suggested an improvement in growth rates in media containing the uranium mine effluent, although not statistically significant. T. versicolor showed promise in terms of bioactive compound production. The production of droplets during growth experiments and significant metabolic changes, associated with the production of bioactive compounds like laccase, melanin, and oxalic acid, were observed in T. versicolor grown in mYEPDA with the uranium mine effluent. These findings present new research opportunities for utilizing waste to enhance the biotechnological production of industrially relevant bioactive compounds and promote the development of circular economy strategies for re-using and valorizing NORM-containing waste.

Resurgence of Bordetella pertussis, including one macrolide-resistant isolate, France, 2024.

As other European countries, France is experiencing a resurgence of pertussis in 2024. Between 1 January and 31 May 2024, 5,616 (24.9%) positive Bordetella pertussis qPCR tests were identified, following a 3-year period of almost null incidence. Of 67 cultured and whole genome sequenced B. pertussis isolates, 66 produced pertactin and 56 produced FIM2, in contrast to pre-COVID-19 years. One isolate of genotype Bp-AgST4 was resistant to macrolides. Pertussis resurgence may favour isolates that produce FIM2 and pertactin.

Exploring the intersection of digitalization and sustainability in oil palm production: challenges, opportunities, and future research agenda.

The increasing global demand for palm oil and its derivatives has led to significant environmental and social concerns, prompting the need for sustainable practices in oil palm production. In recent years, digital technologies have emerged as a potential solution to enhance sustainability in this sector. The objective of this review was to provide insights into the potential benefits and limitations of digital technologies in promoting sustainable practices in the oil palm industry, and to identify key challenges that must be addressed to ensure that digitalization contributes to sustainable development in this sector. To obtain valuable insights on this topic, this review employed a thorough analysis and exploration of relevant literature. Our findings highlight the transformative potential of digital technologies such as precision agriculture, data analytics, blockchain, and robotics to optimize resource utilization, improving efficiency, promoting social welfare, improving supply chain transparency, mitigating environmental impacts, and enhancing sustainability in oil palm production. However, the adoption of these technologies is hindered by several challenges, including high cost, lack of knowledge, and inadequate infrastructure. Our findings emphasize the importance of supportive policies, collaborative efforts, and targeted research to promote technology adoption and ensure equitable benefits across the oil palm industry. Recommendations are provided for industry stakeholders, policymakers, and researchers to leverage digitalization effectively and promote sustainable practices in the oil palm industry, ultimately contributing to global sustainability goals.

Facile Preparation and Study of Self-healing Water-absorbing Expanding Elastomers.

The absorbent expansion elastomer plays a crucial role in engineering sealing and holds a promising future in this field as infrastructure continues to develop. Traditional materials have their limitations, especially when used in large construction projects where the integrity and reliability of the material are of utmost importance. In this work, a self-healing water-absorbing expansion elastomer was developed for continuous production at a large scale to monitor the sealing conditions of massive infrastructure projects. At room temperature, the material exhibited a repairing efficiency of 57.77% within 2 h, which increased to 84.02% after 12 h. This extended reaction time allowed for effective repairs when defects were detected. The material's strength reached approximately 3 MPa, making it suitable for a wide range of applications. The volume expansion rate of the material reached 200-400% for effective sealing, and the fictionalization of the packing made it have a good external force sensing effect and prevent heat build-up effect. The conductive detection performance of the absorbent expansion elastomer was improved by utilizing triple self-healing strategies, including dipole-dipole interaction, ion cross-linked network, and externally-aided restoration materials.

Hemoglobin polymorphism and its association with morphometric and egg production traits in Ethiopian indigenous and Sasso chicken breeds.

The present study investigated the biochemical polymorphism of hemoglobin (Hb) and its relationship with performance traits of Ethiopian indigenous and Sasso chicken breeds. A total of 284 chickens reared in three agro-ecologies were examined for genetic diversity and associations with productive traits at Hb locus using agarose gel electrophoresis. The results showed that the HbA allele was dominant in both breeds, and a higher proportion of male chickens were HbAA genotypes, while females were predominantly HbBB types. In the highland agro-ecology, chickens with the HbAA genotype were the most dominant, whereas in mid- and low-land agro-ecologies, chickens with HbBB and HbAB genotypes were found to be more frequent. A moderate level of expected heterozygosity was obtained with 0.47 and 0.445 for indigenous and Sasso chickens, respectively, with an average effective number of alleles per locus of 1.89 and 1.80. Moreover, chickens with HbAA genotypes showed significantly (p ≤ 0.05) higher body weight and linear body measurements than those of HbAB and HbBB genotypes. However, for appendage body structures (comb and wattle dimensions), chickens with the HbAB and HbBB genotypes had higher mean values. Additionally, clutch size (14.2 ± 0.4), clutch length (21.8 ± 0.7), and eight-month egg production (84.1 ± 1.2) were significantly (p ≤ 0.05) higher for hens with HbBB genotypes, followed by those with HbAB-types. Therefore, the considerable hemoglobin variability and significant associations of Hb variants with the performance traits can be sought as guiding information for further genetic improvement interventions in the chicken breeds under investigation. Further microsatellite marker-based genotyping is recommended to validate the higher morphometric values for HbAA genotypes and the better egg production for HbBB and HbAB genotypes.

Synergistic manipulation of sulfur vacancies and palladium doping of In2S3 for enhanced photocatalytic H2 production.

In this study, a simple one-pot synthesis process is employed to introduce Pd dopant and abundant S vacancies into In2S3 nanosheets. The optimized Pd-doped In2S3 photocatalyst, with abundant S vacancies, demonstrates a significant enhancement in photocatalytic hydrogen evolution. The joint modification of Pd doping and rich S vacancies on the band structure of In2S3 result in an improvement in both the light absorption capacity and proton reduction ability. It is worth noting that photogenerated electrons enriched by S vacancies can rapidly migrate to adjacent Pd atoms through an efficient transfer path constructed by Pd-S bond, effectively suppressing the charge recombination. Consequently, the dual-defective In2S3 shows an efficient photocatalytic H2 production rate of 58.4 ± 2.0 µmol·h-1. Additionally, further work has been conducted on other ternary metal sulfide, ZnIn2S4. Our findings provide a new insight into the development of highly efficient photocatalysts through synergistic defect engineering.

Growth performance, carcass composition, and qualitative meat features of broiler chickens after galactooligosaccharides and sodium butyrate in ovo administration.

The study aimed to analyze the growth performance, feed indicators, and quantitative and qualitative physicochemical features of carcass and meat from broiler chickens after rearing, stimulated in ovo on d 12 of incubation with various substances. In the experiment, 1,200 hatching eggs from meat-type hen Ross 308 parental flock were incubated. On d 12, the injection was performed. Group CON-0 was noninjected. Group CON-S was injected with saline. In the GOS group, the procedure was performed in ovo with galactooligosaccharides (dissolved 3.5 mg of GOS in 0.2 mL of NaCl). In the SB group, butyric acid sodium salt was administered in a 0.3% SB dissolved in 0.2 mL NaCl. After hatching, 336, 1-day-old chicks per group were transferred to the broiler house and kept in 7 pens with 12 chickens per group for 42 d. The body weight and feed intake indicators were calculated. Next, 40 birds were selected (n = 10 per group) and taken to analyze carcass composition and meat quality (pH, color, WHC, drip loss, chemical composition). Compared to the experimental groups, the highest body weight indicators were found in groups CON-0 and CON-S. The feed conversion ratio was the lowest in the SB group on d 36 to 42 (P < 0.05). The European Efficiency Production Factor in groups GOS and SB was lower than in group CON-S (P = 0.005). The GOS group showed higher pH24hours in the pectoral muscles than the CON-S group (P = 0.011). The leg muscles showed better WHC in the CON-S, GOS, and SB groups than in the CON-0 group (P < 0.001). A lower intramuscular fat of the pectoral and leg muscle content was demonstrated, especially in the SB group. Injection of galactooligosaccharides and sodium butyrate in ovo adversely affected broiler production but did not alter carcass composition. It varied pectoral muscles' pH and chemical composition and improved water holding capacity and chemical composition in leg muscles.