A Systematic Literature Review on the Composition, Health Impacts, and Regulatory Dynamics of Vaping.

This comprehensive review deals with the multifaceted aspects of electronic cigarettes (e-cigarettes), examining their composition, health implications, regulatory challenges, and market dynamics. E-cigarettes, also known as vaping devices, function by warming a solution of liquid containing flavors, nicotine, and various other compounds to produce an aerosol for users to inhale. This review underscores the evolution and widespread adoption of e-cigarettes since their introduction in 2003, highlighting their appeal as alternatives to traditional tobacco smoking. The essential parts of e-cigarettes are the battery, heating element, e-liquid (or e-juice), and mouthpiece. Propylene glycol and vegetable glycerin are common ingredients in e-liquids, along with nicotine and other flavors. Concerns over the health impacts of e-cigarettes have grown, particularly in light of incidents like the e-cigarette or vaping-associated lung injury outbreak in 2019 linked to vaping-associated lung injuries. Evidence suggests that while e-cigarettes may pose fewer risks than conventional cigarettes, they are not without health consequences, including potential respiratory and cardiovascular effects. Regulatory efforts worldwide have struggled to keep pace with the rapid evolution of e-cigarettes, exacerbated by their diverse flavors and marketing strategies that appeal to youth. The review discusses global regulatory responses, including bans and restrictions, to curb youth uptake and address public health concerns. Furthermore, the rise of a black market for e-cigarettes poses additional challenges to effective regulation and tobacco control efforts. In conclusion, while e-cigarettes offer potential harm reduction benefits for adult smokers seeking alternatives to traditional tobacco products, their widespread availability and evolving landscape necessitate vigilant regulatory oversight to protect public health, especially among youth. Future research should continue to explore the long-term health impacts and efficacy of e-cigarettes as smoking elimination aids, informing evidence-based policies and interventions.

Enhanced forward osmosis desalination of brackish water using phase-separating ternary organic draw solutions of hydroxypropyl cellulose and propylene glycol propyl ether.

This study introduces draw solutions for application in forward osmosis (FO) processes, combining mono propylene glycol propyl ether (PGPE) with the cellulose derivative hydroxypropyl cellulose (HPC). A total of 16 unique single-solute and ternary organic draw solutions were prepared and evaluated, leading to the selection of three promising solutions for further investigation. Notably, eight of the initial organic draw solutions demonstrated osmotic pressures exceeding 2.4 MPa. The dynamic viscosities of all draw solutions exhibited a significant reduction with increasing temperature. Among the investigated solutions, the 0.25HPC-3.75PGPE demonstrated the most favorable FO performance, achieving average experimental water fluxes of 11.062 and 9.852 Lm-2 h-1 (LMH) against a 1 g/L NaCl brackish feed solution across two FO runs. PRACTITIONER POINTS: Hydroxypropyl cellulose (HPC, MW ~100,000) was mixed with propylene glycol propyl ether (PGPE) as draw solutes for FO processes. Seven combinations of HPC and PGPE produced osmolalities greater than 1000 mOsm/kg. 0.5HPC-7.5PGPE ternary draw solution achieved experimental water fluxes of 11.062 and 9.852 LMH against 1 g/L NaCl brackish feed solution. Leveraging the LCSTs of these ternary organic solutions holds promise for improved separation and regeneration processes.

Propylene glycol alginate sodium sulfate suppressed lung metastasis by blocking P-selectin to recruit CD4 regulatory T cells.

P-selectin has been shown to enhance growth and metastasis of mouse tumors by promoting regulatory T cell (Treg) infiltration into the tumors. Theoretically, a P-selectin antagonist could suppress the process. Popylene glycol alginate sodium sulfate (PSS) is a heparin-like marine drug, which was originally approved to treat cardiovascular disease in China. Previously, we reported that PSS was an effective P-selectin antagonist in vitro. However, it is unknown whether PSS can regulate Treg infiltration and its effect on lung metastasis in vivo. Our results showed that PSS at 30 mg/kg significantly suppressed lung metastasis and improved overall survival, with potency comparable to the positive control LMWH. Mechanistic study indicated that PSS blocked tumor cells adhesion and activated platelets by directly binding with activated platelet's P-selectin. Compared to the model group, PSS decreased the percent of Tregs by 63 % in lungs after treating for 21 days while increasing CD8+ T cells (1.59-fold) and Granzyme B+ CD8 T cells (2.08-fold)' percentage for generating an adaptive response for systemic tumor suppression. The study indicated that the P-selectin antagonist, PSS, suppressed lung metastasis by inhibiting the infiltration of regulatory T cells (Treg) into the tumors.

Acute exposure to electronic cigarette components alters mRNA expression of pre-osteoblasts.

The use of traditional nicotine delivery products such as tobacco has long been linked to detrimental health effects. However, little work to date has focused on the emerging market of aerosolized nicotine delivery known as electronic nicotine delivery systems (ENDS) or electronic cigarettes, and their potential for new effects on human health. Challenges studying these devices include heterogeneity in the formulation of the common components of most available ENDS, including nicotine and a carrier (commonly composed of propylene glycol and vegetable glycerin, or PG/VG). In the present study, we report on experiments interrogating the effects of major identified components in e-cigarettes. Specifically, the potential concomitant effects of nicotine and common carrier ingredients in commercial "vape" products are explored in vitro to inform the potential health effects on the craniofacial skeleton through novel vectors as compared to traditional tobacco products. MC3T3-E1 murine pre-osteoblast cells were cultured in vitro with clinically relevant liquid concentrations of nicotine, propylene glycol (PG), vegetable glycerin (VG), Nicotine+PG/VG, and the vape liquid of a commercial product (Juul). Cells were treated acutely for 24 h and RNA-Seq was utilized to determine segregating alteration in mRNA signaling. Influential gene targets identified with sparse partial least squares discriminant analysis (sPLS-DA) implemented in mixOmics were assessed using the PANTHER Classification system for molecular functions, biological processes, cellular components, and pathways of effect. Additional endpoint functional analyses were used to confirm cell cycle changes. The initial excitatory concentration (EC50) studied defined a target concentration of carrier PG/VG liquid that altered the cell cycle of the calvarial cells. Initial sPLS-DA analysis demonstrated the segregation of nicotine and non-nicotine exposures utilized in our in vitro modeling. Pathway analysis suggests a strong influence of nicotine exposures on cellular processes including metabolic processes and response to stimuli including autophagic flux. Further interrogation of the individual treatment conditions demonstrated segregation by treatment modality (Control, Nicotine, Carrier (PG+VG), Nicotine+PG/VG) along three dimensions best characterized by: latent variable 1 (PLSDA-1) showing strong segregation based on nicotine influence on cellular processes associated with cellular adhesion to collagen, osteoblast differentiation, and calcium binding and metabolism; latent variable 2 (PLSDA-2) showing strong segregation of influence based on PG+VG and Control influence on cell migration, survival, and cycle regulation; and latent variable 3 (PLSDA-3) showing strong segregation based on Nicotine and Control exposure influence on cell activity and growth and developmental processes. Further, gene co-expression network analysis implicates targets of the major pathway genes associated with bone growth and development, particularly craniofacial (FGF, Notch, TGFß, WNT) and analysis of active subnetwork pathways found these additionally overrepresented in the Juul exposure relative to Nicotine+PG/VG. Finally, experimentation confirmed alterations in cell count, and increased evidence of cell stress (markers of autophagy), but no alteration in apoptosis. These data suggest concomitant treatment with Nicotine+PG/VG drives alterations in pre-osteoblast cell cycle signaling, specifically transcriptomic targets related to cell cycle and potentially cell stress. Although we suspected cell stress and well as cytotoxic effects of Nicotine+PG/VG, no great influence on apoptotic factors was observed. Further RNA-Seq analysis allowed for the direct interrogation of molecular targets of major pathways involved in bone and craniofacial development, each demonstrating segregation (altered signaling) due to e-cigarette-type exposure. These data have implications directed toward ENDS formulation as synergistic effects of Nicotine+PG/VG are evidenced here. Thus, future research will continue to interrogate how varied formulation of Nicotine+PG/VG affects overall cell functions in multiple vital systems.

Case report: Side effects of etomidate in propylene glycol in five Göttingen Minipigs.

Etomidate, an agonist of the GABA A receptors, is available for clinical use either in combination with 35% propylene glycol or in a lipid emulsion. Its recognized ability to minimally impact the cardiovascular system made etomidate a suitable option for cardiac-compromised patients. Myoclonus and pain at the injection site are recognized side effects of etomidate in propylene glycol, affecting both human and veterinary species. There is no information available concerning potential side effect in minipigs. In the present case series, we report the side effects related to the use of etomidate in 35% propylene glycol in five Ellegaard Göttingen Minipigs that underwent general anesthesia for cardiac magnetic resonance imaging days or weeks after experimentally induced myocardial infarction. Following intravenous injection of etomidate, laryngeal edema and hyperemia were observed in one case. In another case, tachycardia, apnea, and decreased oxygen saturation, accompanied by laryngeal edema and hyperemia, were observed, which resolved spontaneously in a few minutes. In the arterial or venous samples collected shortly after the induction of general anesthesia, hemolysis was macroscopically visible and subsequently confirmed with a hematological exam in all five cases, as well as hemoglobinuria. Necropsies carried out immediately after euthanasia confirmed macroscopic laryngeal edema, marked diffuse lung alveolar and interstitial edema and hyperemia at histology in one animal, and marked acute lung congestion in another animal. These side effects were not observed when etomidate in a lipid emulsion was injected into another 24 animals. The role played by the different formulations (propylene glycol versus lipidic formulation) has not yet been fully elucidated. Based on our observations, we recommend caution in using the formulation of etomidate in 35% propylene glycol in Göttingen Minipigs.

Sulfated Alginate for Biomedical Applications.

Alginate (Alg) polymers have received much attention due to the mild conditions required for gel formation and their good bio-acceptability. However, due to limited interactions with cells, many drugs, and biomolecules, chemically modified alginates are of great interest. Sulfated alginate (S-Alg) is a promising heparin-mimetic that continues to be investigated both as a drug molecule and as a component of biomaterials. Herein, the S-Alg literature of the past five years (2017-2023) is reviewed. Several methods used to synthesize S-Alg are described, with a focus on new advances in characterization and stereoselectivity. Material fabrication is another focus and spans bulk materials, particles, scaffolds, coatings, and part of multicomponent biomaterials. The new application of S-Alg as an antitumor agent is highlighted together with studies evaluating safety and biodistribution. The high binding affinity of S-Alg for various drugs and heparin-binding proteins is exploited extensively in biomaterial design to tune the encapsulation and release of these agents and this aspect is covered in detail. Recommondations include publishing key material properties to allow reproducibility, careful selection of appropriate sulfation strategies, the use of cross-linking strategies other than ionic cross-linking for material fabrication, and more detailed toxicity and biodistribution studies to inform future work.

The effects of the feeding duration of propylene glycol on major meat quality parameters and substantial proteins in the muscle of Akkaraman lambs.

In this study, the effects of propylene glycol (PG) on meat quality and molecular pathways related to energy metabolism in longissimus lumborum muscle on lambs were evaluated. Seventy-two lambs were divided into three groups consisting of 60th, 90th, and 120th of slaughter days. The dosage of the PG and slaughter days were the variables used in the study. Eight animals were slaughtered from each group on each day. The meat quality parameters (e.g., pH, protein, fatty acid profile) and IGF-1, IGFBP4, and DGAT1 (i.e., mRNA and protein levels) were evaluated. The pH 45 min post-slaughter was higher in PG groups on 120th day. On the 4th day after slaughter, the b value was the lowest in the PG3, while 7th day after slaughter it was highest in Con and PG3 on 90th day. The total n3 and n6 were lowest and the NV was highest on 120th day. The IGFBP4 was upregulated in the PG groups on all of the slaughter days. The DGAT1 was upregulated in the PG3 on the 90th day. The IGF-1, DGAT1, IGFBP4 protein levels were found to have increased in the PG3 on 90th day. The IGFBP4 was found to have decreased in the PG3 on 120th day. According to the results of the study, the oral administration of the PG at the 3 mL/kg live weight0.75 for at least 120 days may have positive effects on meat quality in lambs through the IGF-1, DGAT1, and IGFBP4 genes and the proteins encoded by these genes.

Effect of propylene glycol mannate sulfate on non-proliferative diabetic retinopathy.

PURPOSE: To evaluate the effect of propylene glycol mannate sulfate (PGMS) on retinopathy in non-proliferative diabetic patients. METHODS: Eighty patients (111 eyes) with non-proliferative diabetic retinopathy were selected and retrospectively analyzed. Patients were divided into a control group (40 cases, 56 eyes) and an experimental group (40 cases, 55 eyes) using a random number table method. The control group continued had routine blood glucose management, while the experimental group received PGMS 100 mg additionally TID for 60 days. Changes in visual acuity, fundus conditions including hemorrhage points and exudation in each quadrant, and non-perfusion area were revealed through fundus angiography before and after the treatment period. RESULTS: After PGMS treatment, the experimental group demonstrated significant improvements compared to the control group in terms of eyesight improvement (P=0.002), the macular edema and macular retinal thickness (P=0.008). The total clinical efficacy rate of the experimental group was 67.86%, which was higher than 38.18% of the control group (P=0.032). Notably, there was a significant reduction in macular hemorrhage and hard extrusion. CONCLUSION: Oral administration of PGMS is an effective treatment for non-proliferative diabetic retinopathy.

Electrospinning and Partial Etching Behaviors of Core-Shell Nanofibers Directly Electrospun on Mesh Substrates for Application in a Cover-Free Compact Air Filter.

The exposure of workers to propylene glycol monomethyl ether acetate (PGMEA) in manufacturing environments can result in potential health risks. Therefore, systems for PGMEA removal are required for indoor air quality control. In this study, core-shell zeolite socony mobil-5 (ZSM-5)/polyvinylpyrrolidone-polyvinylidene fluoride nanofibers were directly electrospun and partially wet-etched on a mesh substrate to develop a cover-free compact PGMEA air filter. The electrospinning behaviors of the core-shell nanofibers were investigated to optimize the electrospinning time and humidity and to enable the manufacture of thin and light air-filter layers. The partial wet etching of the nanofibers was undertaken using different etching solvents and times to ensure the exposure of the active sites of ZSM-5. The performances of the ZSM-5/PVDF nanofiber air filters were assessed by measuring five consecutive PGMEA adsorption-desorption cycles at different desorption temperatures. The synthesized material remained stable upon repeated adsorption-desorption cycles and could be regenerated at a low desorption temperature (80 °C), demonstrating a consistent adsorption performance upon prolonged adsorption-desorption cycling and low energy consumption during regeneration. The results of this study provide new insights into the design of industrial air filters using functional ceramic/polymer nanofibers and the application of these filters.

A Comparative Evaluation of Contact Angle and Depth of Penetration of Sodium Hypochlorite With Various Surfactants: An In Vitro Study.

OBJECTIVE: Sodium hypochlorite (NaOCl) is regarded as the most frequently used root canal irrigant. Its high surface tension prevents its penetration into complex canal anatomies. The present study assesses the contact angle and penetration depth of 2.5% NaOCl with 0.2% cetrimide and propylene glycol. MATERIAL AND METHODS: Sixty recently extracted mandibular premolars with a single root were obtained. Thirty were sectioned longitudinally, and the remaining 30 teeth were sectioned transversely. Acrylic blocks were used to mount the parts, and 5 µL of each of the following solutions was placed on the dentin surface: Group 1: 2.5% NaOCl (control), Group 2: 0.2% cetrimide + 2.5% NaOCl, and Group 3: propylene glycol + 2.5% NaOCl. Following this, contact angle analysis was made using a contact angle goniometer. We prepared and instrumented access cavities in 30 teeth to work up to the size of the ProTaper Gold F2 (Dentsply Tulsa Dental Specialties, Tulsa, OK). Samples were allocated to the three groups, and irrigation was done accordingly. They were sectioned at the coronal, middle, and apical thirds and then subjected to confocal laser scanning microscopy. The data were analyzed using a one-way ANOVA and a Tukey multiple comparison test. RESULTS: Group 2 had the least contact angle (35.20°) and the highest depth of penetration (DOP; 752.409 µm) when compared to Groups 1 and 3. The DOP decreased significantly from the coronal, middle, and apical thirds. No discernible variation in the contact angle was found between the radicular and coronal portions. CONCLUSION: 0.2% cetrimide improved the efficiency of 2.5% NaOCl as an irrigant by lowering its contact angle and increasing its DOP.

In vitro toxicity and chemical analysis of e-cigarette aerosol produced amid dry hitting.

Dry hitting, a phenomenon produced by e-cigarettes with refillable cartridges when the liquid in the coil is low, is a common occurrence among regular vapers despite being an unintended consequence of the device. This phenomenon's hazard to public health is still unknown and needs further investigation. Lung cells cultured at the air-liquid interface were exposed to vaped aerosol consisting of 3 % w/v ethyl maltol in propylene glycol for three-second puffs every 30 seconds for 80 total puffs with either dry hit or saturated conditions. Cytotoxicity was measured colorimetrically. The thermal degradation of the heating coils and wicks was visualized using scanning electron microscopy. The chemical byproducts in the aerosol were analyzed using proton nuclear magnetic resonance and inductively coupled plasma mass spectrometry. The results revealed a highly significant increase in cytotoxicity from dry hit treatments. Imaging showed thermal decomposition of the cotton wick after dry hitting, which was confirmed by energy dispersive x-ray spectroscopy with less oxygen in the dry hit cotton. Chemical byproducts were found via unique peaks in the dry hit condensate in the aromatic and alkene regions. Saturated condensate showed higher concentrations of detected metal species than dry-hit condensate. E-cigarette users should avoid dry hitting by refilling tanks or cartridges preemptively or by using disposable coils to avoid increased toxicity during vaping.

Polyols induce acute oxidative stress and mortality in Indian malaria vector Anopheles stephensi (Diptera: Culicidae): potential for use as sugar-cum-toxin source in toxic sugar baits.

BACKGROUND: Development of insecticide resistance in the major malaria vectors has necessitated the development of novel vector control tools. One such strategy involves the use of toxic sugar baits that targets the sugar-feeding behaviour of mosquito vectors. In this study, we investigated the potential of polyols, as a toxic food (sugar) source in toxic sugar baits against the malaria vector Anopheles stephensi Liston. We examined the acute toxicity of six polyols, namely, erythritol, glycerol, mannitol, propylene glycol (PG), sorbitol, and xylitol on adult female An. stephensi mosquitoes at two different concentrations - 2% and 10%. We also studied changes in fecundity, egg hatchability and mid-gut peroxide levels induced by polyol exposure. RESULTS: Among the six polyol compounds tested, PG was most toxic and lethal followed by glycerol and erythritol (P < 0.001) compared to the control (sucrose). PG induced acute mortality at different tested concentrations. In the erythritol- and glycerol-fed groups, a dose-dependent effect on mortality was observed. Glycerol evidently reduced fecundity and egg-hatchability in gonotrophic cycles G1 and G2. Sucrose was the preferred food source (48%), followed by erythritol (18%), PG (10%) and glycerol (8%). Ingestion of polyols increased peroxide levels in mosquito guts, which persisted for extended durations ultimately resulting in rapid mortality (P < 0.05). CONCLUSION: The present study highlights the usefulness of sugar polyols for the development of toxic sugar baits with minimal yet effective ingredients. Further research could be focused on field experiments and on the exploration of synergistic effects of different polyols for optimization of field applications. © 2024 Society of Chemical Industry.

Pitfalls in the Detection of Volatiles Associated with Heated Tobacco and e-Vapor Products When Using PTR-TOF-MS.

We investigated the applicability of proton transfer reaction-time-of-flight mass spectrometry (PTR-TOF-MS) for quantitative analysis of mixtures comprising glycerin, acetol, glycidol, acetaldehyde, acetone, and propylene glycol. While PTR-TOF-MS offers real-time simultaneous determination, the method selectivity is limited when analyzing compounds with identical elemental compositions or when labile compounds present in the mixture produce fragments that generate overlapping ions with other matrix components. In this study, we observed significant fragmentation of glycerin, acetol, glycidol, and propylene glycol during protonation via hydronium ions (H3O+). Nevertheless, specific ions generated by glycerin (m/z 93.055) and propylene glycol (m/z 77.060) enabled their selective detection. To thoroughly investigate the selectivity of the method, various mixtures containing both isotope-labeled and unlabeled compounds were utilized. The experimental findings demonstrated that when samples contained high levels of glycerin, it was not feasible to perform time-resolved analysis in H3O+ mode for acetaldehyde, acetol, and glycidol. To overcome the observed selectivity limitations associated with the H3O+ reagent ions, alternative ionization modes were investigated. The ammonium ion mode proved appropriate for analyzing propylene glycol (m/z 94.086) and acetone (m/z 76.076) mixtures. Concerning the nitric oxide mode, specific m/z were identified for acetaldehyde (m/z 43.018), acetone (m/z 88.039), glycidol (m/z 73.028), and propylene glycol (m/z 75.044). It was concluded that considering the presence of multiple product ions and the potential influence of other compounds, it is crucial to conduct a thorough selectivity assessment when employing PTR-TOF-MS as the sole method for analyzing compounds in complex matrices of unknown composition.

Propylene glycol toxicity in an adolescent secondary to chronic cornstarch ingestion.

Propylene glycol (PG) is a diol (a double alcohol) that is commonly used as a food additive to preserve shelf life and enhance flavors, texture, and appearance. Although PG makes up only a small percentage of cornstarch, ingestion of large doses can cause lactic acidosis leading to hyperosmolarity, high anion gap metabolic acidosis (HAGMA), and a sepsis-like syndrome. A 17-year-old female presented to our emergency department (ED) with chronic chest pain, dyspnea, nausea, and vomiting. Laboratory testing showed an elevated anion gap of 18 mEq/L with no osmolar gap. Toxicology screening was negative. Twelve hours after ED arrival, she admitted to consuming one box of cornstarch daily for the past 6 months. She was admitted to the intensive care unit (ICU) with multisystem organ failure due to propylene glycol toxicity. After empiric treatment with fomepizole and continuous renal replacement therapy, her clinical status gradually improved. This case highlights the importance of obtaining a thorough dietary history in patients with suspected toxicities, especially when laboratory values demonstrate an unexplained HAGMA and/or lactic acidosis. Prompt recognition and therapeutic intervention with fomepizole, a potent inhibitor of alcohol dehydrogenase, is essential in reducing life-threatening sequelae following toxic alcohol ingestions.

Enhancing the functionality of pea proteins by conjugation with propylene glycol alginate via transacylation reaction assisted with ultrasonication.

Pea proteins lack the desirable functional characteristics for food and beverage applications. In this study, transacylation reaction assisted with ultrasonication was used to glycate pea proteins with propylene glycol alginate to enhance their functional properties. The reaction was carried out at pH 11.0 for different pea protein isolate: propylene glycol alginate mass ratios and time durations in a sonic bath at 40 °C. Glycation was confirmed in gel electrophoresis, and ultrasonication enhanced the glycation, with optimal degrees of glycation observed at 45 min reaction time and mass ratios of 2:1 (37.73%) and 1:1 (35.96%). The transacylation reaction increased random coil content of pea proteins by 28% and enhanced their solubility by 2.02 times at pH 7.0, water holding capacity by >50% at pH 7.0, foaming properties, emulsifying properties, and heat stability. This study offers a novel approach that can enhance functionality and applicability of pea proteins.

Blood compatibility of poly(propylene glycol diester) and its water structure observed by differential scanning calorimetry and 2H-nuclear magnetic resonance spectroscopy.

Recently, we applied solution 2H-nuclear magnetic resonance spectroscopy (2H NMR) to analyze the water (deuterium oxide, D2O) structure in several biopolymers at ambient temperature. We established that polymers with good blood compatibility (i.e. poly(2-methoxyethyl acrylate) (PMEA)) have water observed at high magnetic fields (upfield) compared with bulk water. Polymers containing poly(propylene glycol) (PPG) or poly(propylene oxide) (PPO) exhibit good compatibility; however, the reason for this remains unclear. In addition, reports on the blood compatibility of PPO/PPG are limited. Therefore, PPG diester (PPGest) was prepared as a model polymer, and its blood compatibility and water structure were investigated. PPGest exhibited excellent blood compatibility. The water in PPGest was observed upfield by 2H NMR, and it was defined as non-freezing water via differential scanning calorimetry. Based on these observations, the relationship between the blood compatibility and water structure of PPGest is discussed by comparing with those of PMEA, and the reason for the good performance of PPG/PPO-based polymers is discussed.

Deformable Vesicles with Edge Activators for the Transdermal Delivery of Non-Psychoactive Cannabinoids.

BACKGROUND: Transdermal delivery of highly lipophilic molecules is challenging due to the strong barrier function of the skin. Vesicles with penetration enhancers are safe and efficient systems that could improve the transdermal delivery of non-psychoactive cannabinoids such as cannabidiol and desoxy-cannabidiol. In the last decades, research interest in desoxy-cannabidiol as a potent drug with anti-nociceptive properties has risen. Still, its scarce market availability poses a limit for both research and clinical applications. Therefore, it is necessary to improve the synthesis to produce sufficient amounts of desoxy-cannabidiol. Moreover, also the formulation aspects for this drug are challenging and require to be addressed to meet an efficient delivery to the patients. OBJECTIVE: This work aimed to develop innovative phospholipid-based vesicles with propylene glycol (PG), oleic acid (OA), or limonene as edge activators, for the transdermal delivery of highly lipophilic drugs such as non-psychoactive cannabinoids. In particular, desoxy-cannabidiol was selected thanks to its anti-nociceptive activity, and its synthesis was improved enhancing the stereoselectivity of its synthon's production. METHODS: Desoxy-cannabidiol was synthesized by Lewis acid-mediated condensation of p-mentha-2,8-dien- 1-ol and m-pentylphenol, improving the stereoselectivity of the first synthon's production. Transethosomes containing 20-50% w/w PG, 0.4-0.8% w/w OA, or 0.1-1% w/w limonene were optimized and loaded with cannabidiol or desoxy-cannabidiol (0.07-0.8% w/w, 0.6-7.0 mg/mL). Ex-vivo studies were performed to assess both the skin permeation and accumulation of the cannabinoids, as well as the penetration depth of fluorescein- loaded systems used as models. RESULTS: An enantioselective bromination was added to the pathway, thus raising the production yield of pmentha- 2,8-dien-1-ol to 81% against 35%, and the overall yield of desoxy-cannabidiol synthesis from 12% to 48%. Optimized transethosomes containing 0.6 mg/mL cannabinoids were prepared with 1:10 PG:lipid weight ratio, 0.54 OA:lipid molar ratio, and 0.3 limonene:lipid molar ratio, showing good nanometric size (208 ± 20.8 nm - 321 ± 26.3 nm) and entrapment efficiency (> 80%). Ex-vivo tests showed both improved skin permeation rates of cannabinoids (up to 21.32 ± 4.27 µg/cm2 cannabidiol), and skin penetration (depth of fluorescein up to 240 µm, with PG). CONCLUSION: Desoxy-cannabidiol was successfully produced at high yields, and formulated into transethosomes optimized for transdermal delivery. Loaded vesicles showed improved skin penetration of desoxy-cannabidiol, cannabidiol and a lipophilic probe. These results suggest the potential of these carriers for the transdermal delivery of highly lipophilic drugs.

An in vitro comparison of calcium ions release and diffusion ability of calcium hydroxide-based intracanal medicament in combination with three different vehicles like propolis, chitosan, and propylene glycol.

Context: Calcium hydroxide, which is an intracanal medicament, is widely used in endodontics. Improvements can be made to its effectiveness, as calcium hydroxide is dependent on the vehicle. Aim: The study aims to compare and evaluate the release and diffusion ability of calcium hydroxide when mixed with - propolis, chitosan, and propylene glycol. Methods: For this study, 33 single-rooted extracted premolar teeth have been decoronated. After the working length and enlargement of the canals had been established, different preparations of calcium hydroxide with vehicles such as propolis, chitosan, and propylene glycol were loaded into the canals. Atomic absorption spectrophotometry was used to analyze the release of calcium ions in three groups, while a digital pH meter was used to determine an acid change. Results: Atomic absorption spectrophotometry showed sustained releases of calcium ions and the digital pH meter showed increased diffusion capacity in the propylene glycol paste group in comparison to the other two groups. Conclusion: Propylene glycol vehicle made it easier to enter calcium hydroxide into the dentinal tubules.

Effects of vehicles on the physical properties and biocompatibility of premixed calcium silicate cements.

Premixed calcium silicate cements (pCSCs) contain vehicles which endow fluidity and viscosity to CSCs. This study aimed to investigate the effects of three vehicles, namely, polyethylene glycol (PEG), propylene glycol (PG), and dimethyl sulfoxide (DMSO), on the physicochemical properties and biocompatibility of pCSCs. The setting time, solubility, expansion rate, and mechanical strength of the pCSCs were evaluated, and the formation of calcium phosphate precipitates was assessed in phosphate-buffered saline (PBS). The effects of pCSC extracts on the osteogenic differentiation of mesenchymal stem cells (MSCs) were investigated. Finally, the tissue compatibility of pCSCs in rat femurs was observed. CSC containing PEG (CSC-PEG) exhibited higher solubility and setting time, and CSC-DMSO showed the highest expansion rate and mechanical strength. All pCSCs generated calcium phosphate precipitates. The extract of CSC-PG induced the highest expressions of osteogenic markers along with the greatest calcium deposites. When implanted in rat femurs, CSC-PEG was absorbed considerably, whereas CSC-PG remained relatively unaltered inside the femur.

The effect of three additives on properties of mineral trioxide aggregate cements: a systematic review and meta-analysis of in vitro studies.

BACKGROUND: Several efforts have been made to improve mechanical and biological properties of calcium silicate-based cements through changes in chemical composition of the materials. This study aimed to investigate the physical (including setting time and compressive strength) and chemical (including calcium ion release, pH level) properties as well as changes in cytotoxicity of mineral trioxide aggregate (MTA) after the addition of 3 substances including CaCl2, Na2HPO4, and propylene glycol (PG). METHODS: The systematic review was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Electronic searches were performed on PubMed, Embase, and Scopus databases, spanning from 1993 to October 2023 in addition to manual searches. Relevant laboratory studies were included. The quality of the included studies was assessed using modified ARRIVE criteria. Meta-analyses were performed by RevMan statistical software. RESULTS: From the total of 267 studies, 24 articles were included in this review. The results of the meta-analysis indicated that addition of PG increased final setting time and Ca2+ ion release. Addition of Na2HPO4 did not change pH and cytotoxicity but reduced the final setting time. Incorporation of 5% CaCl2 reduced the setting time but did not alter the cytotoxicity of the cement. However, addition of 10% CaCl2 reduced cell viability, setting time, and compressive strength. CONCLUSION: Inclusion of 2.5% wt. Na2HPO4 and 5% CaCl2 in MTA can be advisable for enhancing the physical, chemical, and cytotoxic characteristics of the admixture. Conversely, caution is advised against incorporating elevated concentrations of PG due to its retarding effect. TRIAL REGISTRATION: PROSPERO registration number: CRD42021253707.