Restauração indireta em resina composta: um relato de prontuário / Indirect resin composite restoration: a dental record report

Restaurações diretas em resina composta são amplamente utilizadas em odontologia para restaurar dentes posteriores. Todavia, quando há grande destruição coronária, onde a distância do istmo excede dois terços da distância intercuspídea, as restaurações indiretas em resina composta são indicadas. O presente estudo teve como objetivo relatar a análise de um prontuário de um paciente que recebeu uma restauração indireta em resina composta em dente posterior amplamente destruído. Através da análise de prontuários de pacientes atendidos nas disciplinas de Estágios Supervisionados do Curso de Odontologia da FSG Centro Universitário no ano de 2023, foi selecionado um prontuário de um paciente que compareceu a clínica odontológica da FSG com uma restauração em amálgama fraturada com reparo em resina composta que apresentou sintomatologia dolorosa. O procedimento diagnóstico ocorreu através de exame clínico e radiográfico, que constatou a indicação de substituição da restauração insatisfatória e realização de uma restauração indireta em resina composta. Os resultados estéticos e funcionais apresentados demostraram a viabilidade da técnica restauradora indireta em resina composta para reabilitar dentes posteriores com ampla destruição coronária(AU)

Direct composite resin restoration are widely used in dentistry to restore posterior teeth. However, when there is large coronary destruction, that the distance from the isthmus exceeds two- thirds of the intercuspal distance, indirect composite resin restorations are indicated. This study aimed to report the analysis of a dental record of a patient who received an indirect restoration in composite resin in a badly destroyed posterior tooth. Through the analysis of dental records of patients seen in the disciplines of Supervised Internship of the Dentistry Course at FSG Centro Universitário in the year 2023, the dental record of a patient who attended the FSG dental clinic with fractured amalgam restoration with composite resin repair was selected who had painful symptoms. The diagnostic procedure took place through clinical and radiographic examination, which revealed the indication of replacing the unsatisfactory restoration and carrying out an indirect restoration in composite resin.The aesthetic and functional results presented demonstrated the viability of the indirect composite resin restoration technique for rehabilitating posterior teeth with extensive coronal destruction(AU)

Combining Orthodontic and Restorative Care with Novel Workflows.

This report describes multidisciplinary care combining orthodontics and restorative dentistry for a patient with Class II occlusion and stained mandibular and maxillary resin composite veneers. The orthodontic treatment improved severe overjet and malocclusion prior to restorative care. Occlusal assessment was provided with a novel digital device (PlaneSystem, Zirkonzahn) that is integrated with digital workflows for the evaluation of the occlusal plane and condylar path inclination. Diagnostic digital impressions and digital wax-up for intraoral mock-ups led to the patient's treatment acceptance. Minimally invasive tooth preparation, final digital impressions, and bonding under dental dam isolation fulfilled the patient's esthetic and functional demands with all-ceramic restorations.

Topographic analysis of fiber posts after surface disinfection with different methods

Aims: This study aims to comprehensively examine the surface morphology of fiber posts after undergoing various disinfection methods, utilizing scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Materials and Methods: Twenty-one fiber posts were randomly allocated into seven experimental groups, each consisting of three samples. The disinfection methods employed were as follows: GC - no disinfection treatment; GAL - immersion in 70% alcohol, following the manufacturer's recommended protocol; GHP - soaking in 2.5% sodium hypochlorite for a duration of 10 minutes; GCL - soaking in 2% chlorhexidine gluconate for a period of five minutes; GAC - 30-second etching with 35% phosphoric acid; GPH - soaking in 10% hydrogen peroxide for a duration of 20 minutes; and GSL - autoclave sterilization. Following the disinfection procedures, SEM was employed to scrutinize the surface topography of the posts, while EDX was utilized to identify the chemical elements present on the sample surfaces. Subsequently, a descriptive analysis was conducted on the SEM images and EDX data. Results: SEM analysis revealed that all groups exhibited regions with epoxy resin-coated fibers alongside sections with exposed glass fibers. Analysis of the EDX data indicated that there were no significant differences in the predominant chemical elements across the groups. Carbon (C) and oxygen (O) registered the highest peaks, followed by silicon (Si), zirconium (Zr), sodium (Na), aluminum (Al), and calcium (Ca). Conclusions: The disinfection methods under investigation did not induce substantial alterations in the surface morphology of the fiber posts.

Diagnostic Strategies for Restorations Management: A 70-Month RCT.

We aimed to evaluate the impact of 2 visual diagnostic strategies for assessing secondary caries and managing permanent posterior restorations on long-term survival. We conducted a diagnostic cluster-randomized clinical trial with 2 parallel groups using different diagnostic strategies: (C+AS) based on caries assessment, marginal adaptation, and marginal staining aspects of the FDI (World Dental Federation) criteria and (C) based on caries assessment using the Caries Associated with Restorations or Sealants (CARS) criteria described by the International Caries Detection and Assessment System (ICDAS). The treatment for the restoration was conducted based on the decision made following the allocated diagnostic strategy. The restorations were then clinically reevaluated for up to 71 mo. The primary outcome was restoration failure (including tooth-level failure: pain, endodontic treatment, and extraction). Cox regression analyses with shared frailty were conducted in the intention-to-treat population, and hazard ratios (HRs) and 95% confidence intervals (95% CIs) were derived. We included 727 restorations from 185 participants and reassessed 502 (69.1%) restorations during follow-up. The evaluations occurred between 6 and 71 mo. At baseline, C led to almost 4 times fewer interventions compared with the C+AS strategy. A total of 371 restorations were assessed in the C group, from which 31 (8.4%) were repaired or replaced. In contrast, the C+AS group had 356 restorations assessed, from which 113 (31.7%) were repaired or replaced. During follow-up, 34 (9.2%) failures were detected in the restorations allocated to the C group and 30 (8.4%) allocated to the C+AS group in the intention-to-treat population, with no significant difference between the groups (HR = 0.83; 95% CI = 0.51 to 1.38; P = 0.435, C+AS as reference). In conclusion, a diagnostic strategy focusing on marginal defects results in more initial interventions but does not improve longevity over the caries-focused strategy, suggesting the need for more conservative approaches.

Stress distribution in peri-implant bone, implants, and prostheses: 3D-FEA of marginal bone loss and prosthetic design / Distribuição de estresse no osso peri-implantar, implantes e próteses: análise 3D-FEA de perda óssea marginal e design protético

Objective: In response to the demand for dental implants, extensive research has been conducted on methods for transferring load to the surrounding bone. This study aimed to evaluate the stresses on the peripheral bone, implants, and prostheses under scenarios involving of the following variables: prosthesis designs, vertical bone heights, load angles, and restorative materials. Material and Methods: Three implants were inserted in the premolar and molar regions (5-6-7) of the two mandibular models. Model 1 represented 0 mm marginal bone loss and Model 2 simulated 3 mm bone loss. CAD/CAM-supported materials, hybrid ceramic (HC), resin-nano ceramic (RNC), lithium disilicate (LiSi), zirconia (Zr), and two prosthesis designs (splinted and non-splinted) were used for the implant-supported crowns. Forces were applied vertically (90°) to the central fossa and buccal cusps and obliquely (30°) to the buccal cusps only. The stresses were evaluated using a three-dimensional Finite Element Analysis. Results: Oblique loading resulted in the highest stress values. Of the four materials, RNC showed the low stress in the restoration, particularly in the marginal area. The use of different restorative materials did not affect stress distribution in the surrounding bone. The splinted prostheses generated lower stress magnitude on the bone, and while more stress on the implants were observed. Conclusion: In terms of the stress distribution on the peri-implant bone and implants, the use of different restorative materials is not important. Oblique loading resulted in higher stress values, and the splinted prosthesis design resulted in lower stress (AU)

Objetivo: Em resposta à demanda por implantes dentários, extensa pesquisa foi realizada sobre métodos para transferir carga ao osso circundante. Este estudo buscou avaliar os estresses no osso periférico, implantes e próteses em cenários que envolvem as seguintes variáveis: designs de próteses, alturas ósseas verticais, ângulos de carga e materiais restauradores. Material e Métodos: Três implantes foram inseridos nas regiões dos pré-molares e molares (5-6-7) de dois modelos de mandíbula. O Modelo 1 representou perda óssea marginal de 0 mm e o Modelo 2 simulou perda óssea de 3 mm. Materiais suportados por CAD/CAM, cerâmica híbrida (HC), cerâmica nano-resina (RNC), dissilicato de lítio (LiSi), zircônia (Zr) e dois designs de próteses (sintetizadas e não-sintetizadas) foram utilizados para as coroas suportadas por implantes. Forças foram aplicadas verticalmente (90°) à fossa central e cúspides bucais e obliquamente (30°) apenas às cúspides bucais. Os estresses foram avaliados usando Análise de Elementos Finitos tridimensional. Resultados: Cargas oblíquas resultaram nos valores mais altos de estresse. Entre os quatro materiais, RNC mostrou baixo estresse na restauração, especialmente na área marginal. O uso de diferentes materiais restauradores não afetou a distribuição de estresse no osso circundante. Próteses sintetizadas geraram menor magnitude de estresse no osso, enquanto mais estresse nos implantes foi observado. Conclusão: Em termos de distribuição de estresse no osso peri-implantar e implantes, o uso de diferentes materiais restauradores não é crucial. Cargas oblíquas resultaram em valores mais altos de estresse, e o design de prótese sintetizada resultou em menor estresse. (AU)

Metalloproteinases in Restorative Dentistry: An In Silico Study toward an Ideal Animal Model.

In dentistry, various animal models are used to evaluate adhesive systems, dental caries and periodontal diseases. Metalloproteinases (MMPs) are enzymes that degrade collagen in the dentin matrix and are categorized in over 20 different classes. Collagenases and gelatinases are intrinsic constituents of the human dentin organic matrix fibrillar network and are the most abundant MMPs in this tissue. Understanding such enzymes' action on dentin is important in the development of approaches that could reduce dentin degradation and provide restorative procedures with extended longevity. This in silico study is based on dentistry's most used animal models and intends to search for the most suitable, evolutionarily close to Homo sapiens. We were able to retrieve 176,077 mammalian MMP sequences from the UniProt database. These sequences were manually curated through a three-step process. After such, the remaining 3178 sequences were aligned in a multifasta file and phylogenetically reconstructed using the maximum likelihood method. Our study inferred that the animal models most evolutionarily related to Homo sapiens were Orcytolagus cuniculus (MMP-1 and MMP-8), Canis lupus (MMP-13), Rattus norvegicus (MMP-2) and Orcytolagus cuniculus (MMP-9). Further research will be needed for the biological validation of our findings.

Bonding stability of universal adhesives to feldspathic ceramic with or without prior silane application.

PURPOSE: This study aimed to assess the bonding stability of three universal adhesives to a CAD-CAM feldspathic ceramic with or without prior silane application. MATERIALS AND METHODS: The universal adhesives tested were Ambar Universal (FGM), Single Bond Universal (3M), and Ybond Universal (Yller). Scotchbond Multipurpose Plus (3M) was used as a control. The silane used was RelyX Ceramic Primer (3M). Microtensile bond strength (µTBS) to Vitablocs Mark II was measured after 24 h or 6 months of water aging (n = 20). Failure modes were observed through scanning electron microscopy, and pH and degree of C=C conversion (DC) of the adhesives were measured (n = 3). Data were analyzed using one-, two-, and three-way ANOVA. RESULTS: The pH values differed significantly among the adhesives (p < 0.001), while the DC was similar (p = 0.141). The universal adhesives showed significant differences in µTBS, with higher immediate results when using silane and lower results after aging. Notably, a significant decrease in µTBS was observed after 6 months when silane was applied. In contrast, the control adhesive exhibited consistent results between the 24-h and 6-month storage periods. The universal adhesives showed a decrease in µTBS ranging from 25.5% to 40.1% after prolonged storage. Adhesive failures were predominant in all groups. The presence or absence of silane in the adhesive composition did not affect the bonding performance. CONCLUSIONS: The application of a separate silane coupling agent improved the immediate bond strength of universal adhesives to CAD-CAM feldspathic ceramic. However, this bond strength significantly decreased after 6 months of water aging. The bond strength remained stable for universal adhesives when applied without silane after 6 months of aging.

Soft Tissue Grafting Procedures before Restorations in the Esthetic Zone: A Minimally Invasive Interdisciplinary Case Report.

An esthetically pleasing smile is a valuable aspect of physical appearance and plays a significant role in social interaction. Achieving the perfect balance between extraoral and intraoral tissues is essential for a harmonious and attractive smile. However, certain intraoral deficiencies, such as non-carious cervical lesions and gingival recession, can severely compromise the overall aesthetics, particularly in the anterior zone. Addressing such conditions requires careful planning and meticulous execution of both surgical and restorative procedures. This interdisciplinary clinical report presents a complex case of a patient with esthetic complaints related to asymmetric anterior gingival architecture and severely discolored and eroded maxillary anterior teeth. The patient was treated using a combination of minimally invasive ceramic veneers and plastic mucogingival surgery, resulting in a successful outcome. The report emphasizes the potential of this approach in achieving optimal esthetic results in challenging cases, highlighting the importance of an interdisciplinary team approach in achieving a harmonious balance between dental and soft tissue aesthetics.

Minimally Invasive Laminate Veneer Therapy for Maxillary Central Incisors.

Minimally invasive dentistry is a considered process that requires the clinician to be prepared with the ideal sequence and the tools needed. This report describes a well-planned ultraconservative approach using only two ceramic laminate veneers for the maxillary central incisors to significantly improve the patient's overall smile. A 30-year-old female presented with the chief complaints of having diastemas between the central and lateral incisors as well as incisal wear. Diagnostic wax-up and mock-up were performed, and the patient approved the minimally invasive treatment with veneers only for central incisors. A reduction guide aided the conservative tooth preparations, and hand-crafted feldspathic veneers were bonded under total isolation with a rubber dam. The two final conservative veneers significantly improved the smile and fulfilled the patient's expectations. Following proper planning and sequencing, predictable outcomes were obtained and fulfilled the patient's esthetic demands. Minimally invasive restorative dentistry with only two single veneers can impact the entire smile frame. Overtreatment in the esthetic zone is unnecessary to meet a patient's esthetic expectations.

Efficacy of adhesive strategies for restorative dentistry: A systematic review and network meta-analysis of double-blind randomized controlled trials over 12 months of follow-up.

PURPOSE: The efficacy of etch-and-rinse, selective enamel-etching, and self-etching protocols for universal adhesives in follow-ups of over 12 months was compared in a network meta-analysis. STUDY SELECTION: Randomized controlled trials (RCTs) published from 1998 to 2022 that compared marginal staining, marginal adaptation, retention and fractures, post-operative sensitivity, or recurrence of caries that took place over 12-months post-restoration were selected. A network meta-analysis determined the performance of each adhesive protocol. RESULTS: After screening 981 articles, 16 RCTs were subjected to data extraction. Of which, 674 patients with 2816 restorations, were included in the network meta-analysis. The pooled risk of marginal discoloration following self-etching was significantly higher than that following etch-and-rinse at over 12, 24, and 36 months, which was time-dependent. The pooled risks of unfavorable marginal adaptation and unfavorable retention and fractures following self-etching were also significantly higher than that following etch-and-rinse, with the rates of unfavorable retention and fractures in non-carious cervical lesions increasing in a time-dependent manner. The pooled risks of marginal discoloration, unfavorable marginal adaptation, retention and fractures were similar between etch-and-rinse and selective enamel-etching protocols. Post-operative hypersensitivity and recurrence of caries were not significantly different among etch-and-rinse, selective enamel-etching, and self-etching protocols. CONCLUSIONS: In follow-ups over 12 months, esthetic and functional outcomes of restorations completed with an etch-and-rinse adhesive protocol were superior to the ones achieved with a self-etching strategy without selective enamel-etching. Selective enamel etching is recommended for self-etching systems. Biological responses were similar for all three adhesive strategies.

The possible association between the types of soft palate and gag reflex: a preliminary study / A possível associação entre os tipos de palato mole e o reflexo de vômito: um estudo preliminar

Objective: whether gag reflex, a common problem encountered during dental procedures, is associated with the different types of the soft palate has not been addressed so far. This preliminary study sought to assess the potential association between the different types of soft palate and gag reflex. Material and Methods: one hundred dental patients were recruited. The type of soft palate was determined. Subjective (self-reported) gag reflex was recorded based on many questions and past experience and on a 0-6 VAS. Objective assessment of gag reflex was done using different maneuvers where the posterior part of the tongue and the soft palate were touched by dental mirror, and by taking impression for the upper arch. The association between the types of soft palate and the subjective and objective recorded gag reflex were statistically tested. Results: there were 53 (53%), 33 (33%) and 14 (14%) of the participants with class I, class II and class III soft palate, respectively. A significant association was found between the type of the soft palate and gag reflex in response to one of the subjective items (P= 0.039), more prominent among females (P= 0.009). Concerning the objective assessment, no significant associations were found among males. Meanwhile more females with class II and class III suffered gag reflex and/or actual gagging upon taking the impression (P = 0.001). Conclusion: this study illustrated an association between the type of soft palate and gag reflex, and its severity in females (more specifically soft palate types II and III) more than in males (AU)

Objetivo: o reflexo de vômito, um problema comum encontrado durante procedimentos odontológicos, está ou não associado aos diferentes tipos de palato mole, não foi ainda abordado até o momento. Este estudo preliminar procurou avaliar a possível associação entre os diferentes tipos de palato mole e o reflexo de vômito. Material e Métodos:cem pacientes odontológicos foram recrutados. O tipo de palato mole foi determinado. O reflexo de vômito subjetivo (auto-relatado) foi registrado com base em muitas perguntas e experiências anteriores e em um VAS de 0-6. A avaliação objetiva do reflexo de vômito foi feita por meio de diferentes manobras onde a parte posterior da língua e o palato mole foram tocados por espelho dental e por meio de moldagem da arcada superior. A associação entre os tipos de palato mole e o reflexo de vômito subjetivo e objetivo registrado foi testada estatisticamente. Resultados: houve 53 (53%), 33 (33%) e 14 (14%) participantes com palato mole classe I, classe II e classe III, respectivamente. Foi encontrada associação significativa entre o tipo de palato mole e o reflexo de vômito em resposta a um dos itens subjetivos (P= 0,039), mais proeminente no sexo feminino (P= 0,009). Em relação à avaliação objetiva, não foram encontradas associações significativas entre os homens. Enquanto isso, mais mulheres com classe II e classe III sofreram reflexo de vômito e/ou engasgo real ao receber a impressão (P = 0,001). Conclusão: este estudo ilustrou uma associação entre o tipo de palato mole e reflexo de vômito e sua gravidade em mulheres (mais especificamente palato mole tipos II e III) mais do que em homens. (AU)

Resin Composites in Posterior Teeth: Clinical Performance and Direct Restorative Techniques.

Resin composites are the most versatile restorative materials used in dentistry and the first choice for restoring posterior teeth. This article reviews aspects that influence the clinical performance of composite restorations and addresses clinically relevant issues regarding different direct techniques for restoring posterior teeth that could be performed in varied clinical situations. The article discusses the results of long-term clinical trials with resin composites and the materials available in the market for posterior restorations. The importance of photoactivation is presented, including aspects concerning the improvement of the efficiency of light-curing procedures. With regard to the restorative techniques, the article addresses key elements and occlusion levels for restoring Class I and Class II cavities, in addition to restorative strategies using different shades/opacities of resin composites in incremental techniques, restorations using bulk-fill composites, and shade-matching composites.

Assessment of the remineralisation induced by contemporary ion-releasing materials in mineral-depleted dentine.

OBJECTIVES: Evaluate the ability of current ion-releasing materials to remineralise bacteria-driven artificial caries lesions. MATERIALS AND METHODS: Standardised class I cavities were obtained in 60 extracted human molars. Specimens underwent a microbiological cariogenic protocol (28 days) to generate artificial caries lesions and then were randomly divided into four restorative groups: adhesive + composite (negative control); glass ionomer cement (GIC); calcium silicate cement (MTA); and resin-modified calcium silicate cement (RMTA). Microhardness analysis (ΔKHN) was performed on 40 specimens (10/group, t = 30 days, 45 days, 60 days in artificial saliva, AS). Micro-CT scans were acquired (3/group, t = 0 days, 30 days, and 90 days in AS). Confocal microscopy was employed for interfacial ultra-morphology analysis (2/group, t = 0 days and 60 days in AS). Additional specimens were prepared and processed for scanning electron microscopy (SEM) and FTIR (n = 3/group + control) to analyse the ability of the tested materials to induce apatite formation on totally demineralised dentine discs (60 days in AS). Statistical analyses were performed with a significance level of 5%. RESULTS: Adhesive + composite specimens showed the lowest ΔKHN values and the presence of gaps at the interface when assessed through micro-CT even after storage in AS. Conversely, all the tested ion-releasing materials presented an increase in ΔKHN after storage (p < 0.05), while MTA best reduced the demineralised artificial carious lesions gap at the interface. MTA and RMTA also showed apatite deposition on totally demineralised dentine surfaces (SEM and FTIR). CONCLUSIONS: All tested ion-releasing materials expressed mineral precipitation in demineralised dentine. Additionally, calcium silicate-based materials induced apatite precipitation and hardness recovery of artificial carious dentine lesions over time. CLINICAL RELEVANCE: Current ion-releasing materials can induce remineralisation of carious dentine. MTA shows enhanced ability of nucleation/precipitation of hydroxyapatite compared to RMTA and GIC, which may be more appropriate to recover severe mineral-depleted dentine.

Clinical performance of posterior resin composite restorations after up to 33 years.

OBJECTIVES: This retrospective study evaluated the performance of posterior composites after up to 33 years of clinical service and investigated factors associated with the risk of failures over time including patient- and tooth-related variables. METHODS: Patients who received at least one Class I or Class II direct composite restoration in a private office in 1986-1992 and had follow-up appointments were included. Failures and interventions over time were investigated using the dental records. A follow-up clinical recall was carried out in 2020. Two scenarios were considered: restorations that did not require any intervention (success) or restorations that were repaired and still functional (survival). Multivariate Cox regression analyses and Kaplan-Meier curves were performed using success and survival rates (p < 0.05). RESULTS: One hundred patient records and 683 restorations were included. A total of 353 failures were reported (success rate= 48%). Main reasons for failure were fracture and secondary caries. Most interventions after failures were repairs. Replacements were registered in 183 cases (survival rate= 73%). Annual failure rates were below 2.5% (success) and 1.1% (survival). Larger restorations and maxillary molars had higher failure risks. No significant differences in success rates among different resin composites was observed. A typical observation in this sample of restorations was the presence of moderate to advanced signs of aging, including marginal and surface staining, wear, chipping, changes in anatomical shape and translucency. Clearly aged restorations were still clinically satisfactory. SIGNIFICANCE: This long-term, practice-based study indicates that resin composites can be used to restore posterior teeth with a long-lasting durability.

Elaboração do manual de introdução à odontologia digital com ênfase na odontologia restauradora / Elaboration of the introductory manual to digital dentistry with emphasis on restorative dentistry

O objetivo deste trabalho foi desenvolver um material instrucional para a Academia Odontológica Digital (AOD) da Odontoclínica Central do Exército (OCEx), na forma de um e-book, direcionado aos alunos dos Estágios de Capacitação Profissional da Diretoria de Saúde do Exército (PROCAP), aos Estágios acadêmicos supervisionados realizados na OCEx e aos Oficiais Dentistas que fazem parte do efetivo da OCEx. A metodologia utilizada para a elaboração deste manual foi o levantamento bibliográfico puramente descritivo que abordasse a tecnologia CAD/CAM e o seu uso na Odontologia, fazendo uma contextualização histórica do surgimento da tecnologia CAD/CAM e descrevendo os conceitos relativos ao assunto, dando ênfase na Odontologia Restauradora. Em complemento ao material instrucional foi editado um vídeo demonstrativo de uma sequência completa de escaneamento e fresagem de uma coroa total em porcelana de um dente preparado em manequim articulado, atingindo desta maneira os objetivos propostos por esta dissertação. (AU)

The objective of this work was to develop an instructional material for the Digital Dental Academy (OAD) of the Central Odontoclinic of the Army ( OCEx) , in the form of an e-book directed to the students of the Professional Training Internshipis of the Army Health Directorate ( PROCAP) to the supervised academic Internshipis carried out at OCEx and to the Dental Officers who are part of the OCEx staff. A methodology used for the preparation of this purely descriptive bibliographic that addressed the CAD/CAM technology and its use in Dentistry, making a historical contextualization of the emergence of CAD/CAM technology describing the concepts related to the subject, emphasizing Restorative Dentistry. In addition to the instructional material, a video demonstrating a complete sequence of scanning and milling of a complete crown of a tooth prepared on an articulated mannequin was edited, thus achieving the objectives proposed by this dissertation. (AU)

Randomized controlled trial comparing glass fiber posts and cast metal posts.

OBJECTIVE: This study aimed to assess the survival and success of glass fiber posts compared to cast metal posts in teeth without ferrule. MATERIAL AND METHODS: An equivalency, prospective, double-blind (patient and outcome evaluator) randomized controlled trial (RCT) with parallel groups was designed to compare the clinical performance of cast metal and glass fiber posts cemented in endodontically treated teeth without ferrule (NCT01461239). Teeth were randomly allocated to the glass fiber or cast-metal post groups. All teeth were restored with single metal-ceramic crowns. Kaplan-Meier analysis with the log-rank test was used to test the success and survival between glass fiber and cast metal posts considering a cut-off value of P = 0.05. The annual failure rates were calculated considering the survival data for all restorations and separated by type of post after five years. RESULTS: A hundred and nineteen patients and 183 posts (72 cast metal posts and 111 glass fiber posts) were analyzed. The median follow-up was 62 months (IQR 37-81). The log-rank test for success (P = 0.26) and survival (P = 0.63) analyses did not present statistically significant differences. The AFR of both posts after 5 years was 1.5%. Considering the posts separately and after 5 years, cast metal posts presented AFR of 1.2% and glass fiber posts AFR of 1.7%. Most failures were in posterior teeth (16/23), 10 failures were classified as root fractures and 5 as post debonding. The follow-up rate was 95.3%. CONCLUSIONS: Glass fiber and cast metal posts showed good and similar clinical performance. CLINICAL SIGNIFICANCE: Results of this randomized controlled trial can help dentists to answer how the best technique to rehabilitate endodontically treated teeth with no remaining coronal wall.

Restabelecimento de ponto de contato em dentes com coroas totais posteriores: relato de caso / Reestablishment of contact point on teeth with posterior crowns: case report

A presença do ponto de contato é essencial para manter a saúde das estruturas periodontais, além de evitar inclinações dentárias e desgastes, conservando, assim, uma oclusão ideal. Objetivo: apresentar um relato de caso clínico com restabelecimento dos pontos de contato de forma conservadora, por meio da ortodontia e da dentística restauradora, em dentes com coroas totais. Relato de caso: paciente do gênero feminino, 69 anos de idade, compareceu à clínica odontológica da universidade com queixa de impacção alimentar e desconforto na região superior posterior direita da arcada. Foi observada clinicamente ausência do ponto de contato entre os dentes 15, 16 e 17, optando-se pelo tratamento multidisciplinar envolvendo a ortodontia e a dentística restauradora. Para isso, foram utilizados bráquetes no segundo pré-molar e no primeiro molar superior direito (dentes 15 e 16, respectivamente), e botões ortodônticos nas faces palatinas desses, e do segundo molar superior (dente 17), unidos por elástico corrente tamanho médio. Quando obtidos os pontos de contato, foi realizada a restauração do primeiro pré-molar direito (dente 17) com resina composta. Considerações finais: o uso de elásticos corrente e botões ortodônticos foi satisfatório para a obtenção de pontos de contato entre os dentes.(AU)

The presence of the proximal contact is essential to maintain the periodontal structures health, besides preventing diseases and wastes, thus preserving an ideal occlusion. Aim: the aim of this article is to present a clinical case report with restoration of the proximal contact in a conservative way, through orthodontics and restorative dentistry, in teeth with total crowns. Case report: a 69-year-old female patient attended the university dental clinic with complaint of food impaction and discomfort in the upper right posterior region of the arcade. It was clinically observed absence of the point of contact between the teeth 15, 16 and 17 and opted for the multidisciplinary treatment involving orthodontics and restorative dentistry. For this, brackets were used in the second premolar and first maxillary right molar (teeth 15 and 16, respectively), and orthodontic buttons on the palatal surfaces of the same, and on the second upper molar (tooth 17), joined by the current elastic medium size. When the proximal contact was obtained, the first right premolar restoration was performed with a composite resin. Final considerations: the use of current elastics and orthodontic buttons were satisfactory for obtaining proximal contact between these teeth.(AU)

A randomized clinical trial of class II composite restorations using direct and semidirect techniques.

OBJECTIVE: This prospective study evaluated the clinical performance of large class II restorations made with different techniques over 24 months. MATERIALS AND METHODS: Thirty patients received two class II restorations (n = 60) using a nanohybrid composite and different restorative techniques (direct (DT), semidirect (SDT)), in a split-mouth randomized design. The same adhesive system was applied for all restorations. For DT, the restorative material was applied directly inside the tooth preparation. For SDT, a tooth preparation impression was obtained using alginate and a silicone flexible die was prepared. The restoration was made chairside on the model and additionally light cured. After that, it was cemented in preparation using resinous cement. All restorations were evaluated using the FDI criteria after 7 days, 6, 12, and 24 months postoperatively. RESULTS: After 24 months, 24 patients attended the recall and 48 restorations were evaluated. Fisher's statistical analysis (5%) showed no difference between the techniques. Nevertheless, Friedman's test showed significant differences for some criteria after 12 months of evaluation for both techniques. Postoperative sensitivity was reported in one DT restoration. Also, after 24 months, one SDT restoration presented marginal fracture, which was deemed unsatisfactory. CONCLUSIONS: After a 24-month follow-up, no significant difference between the tested techniques was detected. The restorations performed with both techniques produced clinically acceptable restorations. CLINICAL RELEVANCE: This study demonstrated the viability of applying two different operatory techniques (direct and semidirect) for class II resin composite restorations.

One-step fiber post cementation and core build-up in endodontically treated tooth: A clinical case report.

OBJECTIVE: This clinical case report addresses the step-by-step of the application of a core-and-post system that uses a single resin composite material to fiber post cementation and core build-up in a maxillary left central incisor. CLINICAL CONSIDERATIONS: The literature reports several materials and methods for the restoration of endodontically treated teeth with coronal destruction that require an intra-radicular fiber post for the core build-up. The present case report describes a core-and-post or "monoblock" technique. A dual resin composite (Core-X Flow; Dentsply DeTrey) highly filled material and cement was used for luting the fiber post (Blue X-Post) and build-up the core structure in an easy application. CONCLUSIONS: The "core-and-post" technique that uses a single material system protocol minimizes the material interfaces, steps of procedures, and chair-time in comparison to conventional techniques. CLINICAL SIGNIFICANCE: The use of different materials for post cementation and core build-up requires more steps, which increases the chair-time and number of interfaces among the materials. Since the "monoblock" technique uses only one material, it can streamline the clinical procedures, thus, saving time and materials. Moreover, techniques based on core-and-post systems are easily applied, versatile, and esthetics, and can be applicable to posterior and anterior teeth.

Four-year clinical prospective follow-up of resin composite restoration after selective caries removal using Er:YAG laser.

OBJECTIVES: The aim of this study was to longitudinally evaluate, after a 4-year period, the clinical longevity of composite resin restoration compared to the baseline, after selective caries removal in permanent molars using Er:YAG laser or bur preparation with biomodification of dentin with the use of chlorhexidine. METHODS: Selective caries removal was performed on 80 teeth of 20 individuals who each had at least four active carious lesions. These lesions, located on occlusal surfaces of permanent molar counterparts, were removed using (i) Er:YAG laser biomodified with chlorhexidine, (ii) Er:YAG laser and application of deionized water, (iii) bur preparation biomodified with chlorhexidine, and (iv) bur preparation and application of deionized water. At the end of 4 years, 64 of the 80 restorations were evaluated in 16 individuals (n = 16). The restorations were evaluated, both clinically and photographically, using scanning electron microscopy (SEM) and pulp vitality analysis. The experimental data were statistically evaluated by kappa, Fisher's, and chi-square tests, with a significance level of 5%. The Kaplan-Meier test and the Cox regression analysis were used to evaluate the survival of the restorations. RESULTS: After 4 years of follow-up, there was a statistically significant difference in marginal discoloration criteria for all of the groups evaluated. For marginal adaptation criteria, there was a statistically significant difference for the Er:YAG laser group biomodified with chlorhexine (p = 0.050). For clinical and radiographic evaluation of pulp vitality, there were no statistically significant differences among the groups (p = 0.806). CONCLUSION: Er:YAG laser can be used for selective caries removal, regardless of dentin biomodification with chlorhexidine or application of deionized water, once it produced promising results in composite resin restorations after 4 years of follow-up, according to the criteria evaluated. The selective caries removal using Er:YAG laser or bur and the biomodification of dentin with the use of chlorhexidine did not influence the survival of composite resin restorations after the 4-year follow-up period. CLINICAL RELEVANCE: Composite resin restorations applied after selective caries removal using Er:YAG laser or burs, regardless of dentin biomodification with the use of chlorhexidine or application of deionized water, showed adequate clinical behavior after 4 years of follow-up.