Optimization of Ultrasonic-Assisted Extraction of Phenolic Compounds and Antioxidant Activity from Araticum Peel Using Response Surface Methodology.

The peel represents a significant portion of the araticum fruit (about 40%), which becomes waste after its consumption or processing. Previous studies have shown that the araticum peel is rich in phenolic compounds; however, little is known about the ideal conditions for recovering these compounds. Therefore, response surface methodology, using a central composite rotatable design, was employed to optimize the extraction process to maximize the total phenolic compounds (TPCs) and enhance the Trolox equivalent antioxidant capacity (TEAC) from araticum peel. The variables optimized were ethanol concentration (EC; 20-80%, v/v), extraction time (ET; 5-45 min), and solid-solvent ratio (SSR; 10-100 mg/mL). Additionally, condensed tannins, antioxidant capacity against synthetic free radicals (TEAC and FRAP) and reactive oxygen species (ROS), and the phenolic compounds profile, were evaluated. Optimum extraction conditions were 50% (v/v) ethanol concentration, 5 min of extraction time, and 10 mg/mL solid-solvent ratio. Under these conditions, experimental TPCs and TEAC values were 70.16 mg GAE/g dw and 667.22 µmol TE/g dw, respectively, comparable with predicted models (68.47 mg GAE/g dw for TPCs and 677.04 µmol TE/g dw for TEAC). A high condensed tannins content (76.49 mg CE/g dw) was also observed and 12 phenolic compounds were identified, predominantly flavonoids (97.77%), including procyanidin B2, epicatechin, and catechin as the major compounds. Moreover, a potent antioxidant activity was observed against synthetic free radicals and ROS, especially in scavenging peroxyl and hydroxyl radicals. From this study, we obtained the ideal conditions for recovering phenolic compounds from araticum peel using a simple, fast, sustainable, and effective method, offering a promising opportunity for the management of this plant byproduct.

A novel laser resection approach: efficacy of rotatable bi-channel en bloc resection of bladder tumor in a pilot in-vivo study.

En bloc resection of bladder tumor (ERBT) involves removing bladder tumors and their base. Laser resection has been used to reduce complications including bleeding and obturator nerve reflex (ONR). We developed a novel approach (rotatable bi-channel en bloc resection of bladder tumor (RBC-ERBT)) and assessed its efficacy in a pilot in-vivo study to enhance laser ERBT's applicability in challenging bladder regions. In the laser RBC-ERBT procedure, lesions were excised by inserting a holmium laser through the rotating external working channel, while forceps were inserted through the internal working channel provided traction on the tissue. Fifteen laser RBC-ERBT procedures were performed in five different bladder areas of three live pigs. The technical success rate (TSR), procedure time, lesion size, occurrence of complications (bleeding, perforation, ONR), and detrusor muscle (DM) presence rate and DM thickness were evaluated. All 15 procedures were performed with a 100% TSR. The resections were successful in all bladder regions (posterior, left, right and anterior walls and dome). Median procedure time was 20 min. The resected specimen size was 10 mm × 7 mm to 17 mm × 13 mm. Mild bleeding occurred in two procedures (13.3%) but was effectively managed. No incidents of ONR or perforation were observed. Histological examination confirmed presence of DM in all specimens with a median DM thickness of 1.26 mm. Our pilot in-vivo study suggested the feasibility and effectiveness of laser RBC-ERBT for bladder tumors in various locations. This technique offers effective traction, improved visualization, and enhanced laser accessibility. Further studies are required to validate its effectiveness in humans.

A practical and eco-friendly method for the determination of polycyclic aromatic hydrocarbons in açaí-based food products by vacuum-assisted sorbent extraction coupled to gas chromatography-mass spectrometry.

For the first time, a method for the simultaneous analysis of fifteen polycyclic aromatic hydrocarbons (PAHs), including light and heavy PAHs, in açaí-based food products (AFPs) was developed using vacuum-assisted sorbent extraction (VASE) combined with gas chromatography-mass spectrometry (GC-MS). The method requires no organic solvents and is amenable to full automation. To achieve optimal analytical extraction conditions, VASE parameters including stirring rate, extraction time, desorption temperature, desorption time, preheat time, and preheat temperature were optimized using sequential multivariate optimization. The method was validated and yielded limits of quantification below 1 µg kg-1 for all analytes, with recoveries ranging from 65 % to 112 % and good precision (≤11 % relative standard deviation). Additionally, the greenness and practical aspects of the method were investigated using the Green Analytical Procedure Index (GAPI), eco-scale, and the Blue Applicability Grade Index (BAGI), respectively. The VASE-GC-MS approach is suitable for routine analysis and exhibits characteristics of a green analytical method. No PAHs were detected above the limits of detection in thirty samples of AFPs.

Ultrasound-assisted extraction and concentration of phenolic compounds from jabuticaba sabará (Plinia peruviana (Poir.) Govaerts) peel by nanofiltration membrane.

Jabuticaba peel, rich in antioxidants, offering health benefits. In this study, the extraction of phenolic compounds from jabuticaba peel using ultrasound-assisted (UA) and their subsequent concentration by nanofiltration (NF) employing a polyamide 200 Da membrane was evaluated. The UA extractions were conducted using the Central Composite Rotatable Design (CCRD) 22 methodology, with independent variables extraction time (11.55 to 138 min) and temperature (16.87 to 53.3 °C), and fixed variables mass to ethanol solution concentration at pH 1.0 (1:25 g/mL), granulometry (1 mm), and ultrasonic power (52.8 W). The maximum concentrations obtained were 700.94 mg CE/100 g for anthocyanins, 945.21 mg QE/100 g for flavonoids, 133.19 mg GAE/g for phenols, and an antioxidant activity IC50 of 24.36 µg/mL. Key phenolic compounds identified included cyanidin-3-glucoside, delphinidin-3-glucoside, and various acids like syringic and gallic. NF successfully concentrated these compounds, enhancing their yield by up to 45%. UA and NF integrate for sustainable extraction.

An essentially radiation-transparent body coil integrated with a patient rotation system for MR-guided particle therapy.

BACKGROUND: The pursuit of adaptive radiotherapy using MR imaging for better precision in patient positioning puts stringent demands on the hardware components of the MR scanner. Particularly in particle therapy, the dose distribution and thus the efficacy of the treatment is susceptible to beam attenuation from interfering materials in the irradiation path. This severely limits the usefulness of conventional imaging coils, which contain highly attenuating parts such as capacitors and preamplifiers in an unknown position, and requires development of a dedicated radiofrequency (RF) coil with close consideration of the materials and components used. PURPOSE: In MR-guided radiation therapy in the human torso, imaging coils with a large FOV and homogeneous B1 field distribution are required for reliable tissue classification. In this work, an imaging coil for MR-guided particle therapy was developed with minimal ion attenuation while maintaining flexibility in treatment. METHODS: A birdcage coil consisting of nearly radiation-transparent materials was designed and constructed for a closed-bore 1.5 T MR system. Additionally, the coil was mounted on a rotatable patient capsule for flexible positioning of the patient relative to the beam. The ion attenuation of the RF coil was investigated in theory and via measurements of the Bragg peak position. To characterize the imaging quality of the RF coil, transmit and receive field distributions were simulated and measured inside a homogeneous tissue-simulating phantom for various rotation angles of the patient capsule ranging from 0° to 345° in steps of 15°. Furthermore, simulations with a heterogeneous human voxel model were performed to better estimate the effect of real patient loading, and the RF coil was compared to the internal body coil in terms of SNR for a full rotation of the patient capsule. RESULTS: The RF coil (total water equivalent thickness (WET) ≈ 420 µm, WET of conductor ≈ 210 µm) can be considered to be radiation-transparent, and a measured transmit power efficiency (B1 +/ P $\sqrt {\mathrm{P}} $ ) between 0.17 µT/ W $\sqrt {\mathrm{W}} $ and 0.26 µT/ W $\sqrt {\mathrm{W}} $ could be achieved in a volume (Δz = 216 mm, complete x and y range) for the 24 investigated rotation angles of the patient capsule. Furthermore, homogeneous transmit and receive field distributions were measured and simulated in the transverse, coronal and sagittal planes in a homogeneous phantom and a human voxel model. In addition, the SNR of the radiation-transparent RF coil varied between 103 and 150, in the volume (Δz = 216 mm) of a homogeneous phantom and surpasses the SNR of the internal body coil for all rotation angles of the patient capsule. CONCLUSIONS: A radiation-transparent RF coil was developed and built that enables flexible patient to beam positioning via full rotation capability of the RF coil and patient relative to the beam, with results providing promising potential for adaptive MR-guided particle therapy.

Modeling and development of technology for smelting a complex alloy (ligature) Fe-Si-Mn-Al from manganese-containing briquettes and high-ash coals.

Investigation of the possibility of obtaining a complex master alloy used in the deoxidation of steel, smelted from substandard manganese-containing materials, briquettes, and high-ash coals in ore-thermal electric furnaces. Thermodynamic modeling was carried out using the HSC Chemistry software package to determine the optimal process parameters using a second-order rotatable plan (Box-Hunter plan). Thermodynamic modeling improves the understanding of physical and chemical processes, allows making predictions about the behavior of the system under various conditions, optimizing processes and saving time and resources necessary for experiments. Electric smelting of the briquette was carried out with coal and quartzite (to adjust the chemical composition and neutralize residual carbon) in an ore-thermal electric furnace with a power of up to 150 kV*A. The influence of temperature on the equilibrium distribution of silicon, manganese, and aluminum in the «briquette-coal-quartzite¼ system, the degree of transition of silicon and manganese into a complex ligature and the content of these metals in the alloy are determined by the method of thermodynamic modeling. As a result of experiments on ore-thermal electric smelting of a briquette with high-ash coal, a complex ligature was obtained with an average content of 45.92-53.11% silicon, 27.72-34.81% manganese and 5.60-6.91% aluminum.

Multivariate optimization for extraction of 2-methylimidazole and 4-methylimidazole from açaí-based food products using polymeric ionic liquid-based sorbent coatings in solid-phase microextraction coupled to gas chromatography-mass spectrometry.

In this study, polymeric ionic liquids featuring different functional moieties were applied as sorbent coatings in direct-immersion solid-phase microextraction (DI-SPME) for the extraction of 2-methylimidazole (2-MI) and 4-methylimidazole (4-MI) from açaí-based food products followed by gas chromatography-mass spectrometry (GC-MS) analysis. The analytical method was optimized using a sequential experimental design. Variables used in GC-MS such as desorption time, as well as for SPME-DI, including extraction time, extraction temperature, incubation time of extraction, amount of NaCl in the extract, and stirring rate, were optimized. The fitness-for-purpose of the method was verified by the linearity of matrix-matched calibration curves (R2 ≥ 0.9921), adequate recoveries (81.7-89.7 %), and precision (relative standard deviations ≤11.2 %). The method was applied to twenty-five samples of açaí-based food products. 4-MI was found in four samples whereas 2-MI was not detected above the limit of detection. The method was found to be suitable for quality control analysis.

Application of sequential design for enhanced L-asparaginase synthesis from Ganoderma australe GPC191.

With an increasing demand for L-asparaginase in pharmaceutical and food sectors for its cytostatic and acrylamide-reducing qualities, there's a need to discover novel, highly productive enzyme sources with improved pharmacokinetic profiles. Keeping this in mind, the present study aimed at maximizing the potential of Ganoderma australe GPC191 to produce L-asparaginase by fermentation medium optimization using statistical validation. Of the 11 physicochemical parameters evaluated under submerged fermentation conditions through one-factor-at-a-time approach and Plackett-Burman design, only four parameters (inoculum load, L-asparagine, soybean meal, and initial pH) influenced L-asparaginase production, significantly (p < 0.001). The optimal levels and interaction effects of these on the overall production were further evaluated by the central composite rotatable design of response surface methodology. Post-optimization, 27.34 U/mL was predicted as the maximum activity at pH 7 with 5n inoculum load and 15 g/L each of L-asparagine and soybean meal. Experimental validation yielded an activity of 28.52 U/mL, indicating an overall 18.17-fold increase from the unoptimized stage. To our knowledge, this is the first report signifying the L-asparaginase production aptitude of G. australe with sequential statistical validation using agricultural waste, which can serve as a model to enhance its yields, offering a sustainable and cost-effective solution for industrial application.

Optimization of ultrasound - assisted extraction of phenolic compounds and flavonoids from Hortia oreadica leaf / Optimización de la extracción asistida por ultrasonido de compuestos fenólicos y flavonoides de la hoja de Hortia oreadica

Hortia oreadica is indiscriminated used by people from Cerrado. However, vegetable raw material quality is decisive in obtaining inter mediate and final products. So, this study aimed to establish quality parameters of H. oreadica . For this, we performed the phytochemical screening of H. oreadica leaf and identified the best extractive conditions for phenolic compounds and flavonoids usin g factorial experimental design, varying the alcoholic strength, extraction temperature, and solid/liquid ratio in the ultrasound - assisted extraction method. The optimum extraction condition for phenolic compounds and flavonoids was 60% alcoholic strength, 40°C temperature, and a solid/liquid ratio of 8 mg/m L . Under this setting, the phenolic and flavonoid contents were 0.171 ± 0.002 mg/m L (predicted value = 0.165) and 0.087 ± 0.002 mg/m L (predicted value = 0.084), respectively. The optimized extraction par ameters could be upscaled to develop pharmaceutical drugs or nutraceutical products from this non - traditional plant species using an eco - friendly approach.

Hortia oreadica es utilizada indiscriminadamente por la gente del Cerrado. Sin embargo, la calidad de la materia prima vegetal es determinante en la obtención de productos intermedios y finales. Por lo tanto, este estudio tuvo como objetivo establecer parámetros de calidad de H. oreadica . Para ello, realizamos el tamizaje fitoquímico de la hoja de H. oreadica e identificamos las mejores condiciones extractivas para compuestos fenólicos y flavonoides mediante un diseño experimental factorial, variando el grado alcohólico, la temperatura de extracción y la relación sólido/líquido en el método de extracción asistido por ultrasonido. La condición óptima de extracción para compuestos fenólicos y flavonoides fue de 60% de grado alcohólico, 40°C de t emperatura y una relación sólido/líquido de 8 mg/m L . Bajo esta configuración, los contenidos de fenoles y flavonoides fueron 0,171 ± 0,002 mg/m L (valor previsto = 0,165) y 0,087 ± 0,002 mg/m L (valor previsto = 0,084), respectivamente. Los parámetros de ext racción optimizados podrían ampliarse para desarrollar fármacos o productos nutracéuticos a partir de esta especie de planta no tradicional uti lizando un enfoque ecológico .

Optimizing the effect of ultrasonication and germination on antinutrients and antioxidants of kodo (Paspalum scrobiculatum) and little (Panicum sumatrense) millets.

Kodo (Paspalum scrobiculatum) and little (Panicum sumatrense) millet grains were utilized to minimize their antinutrient content (phytate and tannin) and maximize their antioxidant activity (DPPH) by studying the effect of ultrasonication time, germination time and temperature using central composite rotatable design. Results revealed the optimum conditions for producing ultrasonicated and germinated kodo and little millet flour of the highest antioxidant activity and lowest antinutrient content (phytate and tannin) by using 30 min for ultrasonication, 72 h for germination at 40 °C. Further, a second order model was developed to describe and predict the effect of process variables on antioxidant activity and antinutrient contents. Extended experiments were carried out under the optimized conditions to validate the developed model. The antioxidant activity obtained was 88.46% RSA and 89.06% RSA for kodo and little millet grain flours, respectively whereas antinutrient content for phytate was 0.165 mol/kg and 0.199 mol/kg and for tannin 2.88 mol/kg and 9.51 mol/kg, for kodo and little millet grain flours, respectively. This study provides useful information about the potential utilization of ultrasonicated and germinated kodo and little millet grain flours for the development of functional foods.

Rotatable Bi-Channel En Bloc Resection of Bladder Tumor for Non-Muscle-Invasive Bladder Cancer in an Ex Vivo Porcine Model.

En bloc resection of bladder tumor (ERBT) is a promising alternative for non-muscle-invasive bladder cancer management. However, the tumor characteristics and surgeon's experience influence its application. Therefore, in this pilot study, we developed a technique called "rotatable bi-channel en bloc resection of bladder tumor (RBC-ERBT)" and assessed its feasibility, efficacy, and safety compared with those of conventional ERBT. In an ex vivo porcine bladder model, 160 bladder lesions of varying morphologies (exophytic and flat) and sizes (1 and 2 cm) were created and evenly distributed across different locations. A total of 160 procedures were performed, with the ERBT and RBC-ERBT group each exhibiting 80 lesions. RBC-ERBT had a significantly higher technical success rate than ERBT (98.8% vs. 77.5%) for exophytic and flat lesions of both sizes and dome lesions. The procedure time was significantly shorter in the RBC-ERBT group, particularly for flat lesions, lesions with a 2 cm diameter, and lesions located at the dome. RBC-ERBT had a significantly lower piecemeal resection rate than ERBT (0% vs. 18.8%). The incidence of perforation or detrusor muscle sampling did not differ between the groups. Compared with conventional ERBT, RBC-ERBT offered improved success rates, reduced resection times, and effective management of challenging lesions.

Exploration for cobalt/nitrogen-doped catalyst to creatinine degradation via peroxymonosulfate activation: toxicity evaluation, statistical modeling, and mechanisms study.

Developing multifunctional catalysts applied in diversiform modes via advanced oxidation processes (AOPs) is a promising and attractive approach for organic pollution degradation. Herein, a novel hollow bamboo-like structural cobalt/nitrogen-doped carbonized material (CoC/N) was employed as a catalyst for AOPs, in which CoC/N was prepared in situ through calcining a Co-based coordination polymer. When CoC/N was utilized as a peroxymonosulfate (PMS) activator, the catalyst stood out prominent activities for effective CA oxidation. Furthermore, a five-level central composite rotatable design (CCRD) model describing CA decay as a function of PMS concentration, CoC/N dosage, and solution pH value was successfully constructed and engaged to explore the optimal operating conditions. Finally, the possible degradation mechanism of CA in CoC/N-PMS system was proposed by quantum chemistry calculation and LC/MS analysis. This work shed light on the structural morphology of the catalyst and its PMS synergy degradation pathway, which promotes its applications in miscellaneous pollutant degradation. A new Co/N-doped material was used to degrade unconventionality organic pollutant creatinine (CA) for the first time, in which the scientific approaches of five-level central composite rotatable design (CCRD) model, response surface methodology (RSM) and density function theory (DFT) were employed to evaluate the material performance and CA degradation pathway. The toxicity evaluation, statistical modeling and mechanisms study have been investigated meticulously.

Nanoencapsulation of Phenolic Extracts from Native Potato Clones (Solanum tuberosum spp. andigena) by Spray Drying.

Native potato clones grown in Peru contain bioactive compounds beneficial to human health. This study aimed to optimize the spray-drying nanoencapsulation of native potato phenolic extracts utilizing a central composite design and response surface methodology, obtaining the optimal treatment to an inlet temperature of 120 °C and an airflow of 141 L/h in the nano spray dryer B-90, which allowed maximizing the yield of encapsulation, antioxidant capacity (DPPH), encapsulation efficiency (EE), total phenolic compounds, and total flavonoids; on the other hand, it allowed minimizing hygroscopicity, water activity (Aw), and moisture. Instrumental characterization of the nanocapsules was also carried out, observing a gain in lightness, reddening of the color, and spherical nanoparticles of heterogeneous size (133.09-165.13 nm) with a negative ζ potential. Thermal, infrared, and morphological analyses confirmed the encapsulation of the core in the wall materials. Furthermore, an in vitro release study of phenolic compounds in an aqueous solution achieved a maximum value of 9.86 mg GAE/g after 12 h. Finally, the obtained nanocapsules could be used in the food and pharmaceutical industry.

One-Pot Fabrication of Nanocomposites Composed of Carbon Nanotubes and Alumina Powder Using a Rotatable Chemical Vapor Deposition System.

The fabrication of multi-dimensional nanocomposites has been extensively attempted to achieve synergistic performance through the uniform mixing of functional constituents. Herein, we report a one-pot fabrication of nanocomposites composed of carbon nanotubes (CNTs) and Al2O3 powder. Our strategy involves a synthesis of CNTs on the entire Al2O3 surface using a rotatable chemical vapor deposition system (RCVD). Ehylene and ferritin-induced nanoparticles were used as the carbon source and wet catalyst, respectively. The RCVD was composed of a quartz reaction tube, 5.08 cm in diameter and 150 cm in length, with a rotation speed controller. Ferritin dissolved in deionized water was uniformly dispersed on the Al2O3 surface and calcinated to obtain iron nanoparticles. The synthesis temperature, time, and rotation speed of the chamber were the main parameters used to investigate the growth behavior of CNTs. We found that the CNTs can be grown at least around 600 °C, and the number of tubes increases with increasing growth time. A faster rotation of the chamber allows for the uniform growth of CNT by the tip-growth mechanism. Our results are preliminary at present but show that the RCVD process is sufficient for the fabrication of powder-based nanocomposites.

Optimization of glutathione production in Saccharomyces cerevisiae HBSD-W08 using Plackett-Burman and central composite rotatable designs.

BACKGROUND: Glutathione is an important bioactive tripeptide and is widely used in the food, medicine, and cosmetics industries. The aim of this study was to provide an efficient method for producing GSH and to explore its synthesis mechanism. Saccharomyces cerevisiae strain HBSD-W08 was screened for GSH production, and its fermentation medium was optimized using single-factor experiments of the Plackett-Burman and central composite rotatable designs. This method was used to analyze the effects of the presence and concentration of various carbon sources, organic and inorganic nitrogen sources, metal ions, and precursor amino acids on GSH production and catalase, superoxide dismutase, and γ-glutamylcysteine synthetase activity. RESULTS: The three most significant factors affecting GSH production were peptone (optimal concentration [OC]: 2.50 g L- 1), KH2PO4 (OC: 0.13 g L- 1), and glutamic acid (OC: 0.10 g L- 1). GSH productivity of HBSD-W08 was obtained at 3.70 g L- 1 in the optimized medium. The activity of γ-GCS, which is a marker for oxidative stress, was found to be highly positively correlated with GSH production. CONCLUSIONS: This finding revealed an underlying relationship between GSH synthesis and oxidative stress, providing useful information for developing effective GSH fermentation control strategies.

Optimization of process conditions for effective ohmic heating of greater lizardfish (saurida tumbil) sausage via response surface methodology.

In current research, the optimization of ohmic heating on greater lizardfish (Saurida tumbil) sausage variables was carried out using response surface methodology-central composite design (RSM-CCD). The effect of process variables including voltage gradient (15-60 V/cm), time (1-15 min), and temperature (60-90°C) on the microbial properties, pH, peroxide value, water holding capacity (WHC), and cooking loss of the sausages was evaluated. The results showed that the characteristics of the sausages were dependent on the ohmic heating conditions and these properties can be modulated. As per the results, the voltage gradient and temperature has a significant effect on the total plate count (p < 0.05). The increase in voltage gradient was the most effective on pH (5.63-6.91). The interaction terms of all items had a significant effect (p < 0.05) on the peroxide value of the fish sausages. Higher amount of temperature and process time were resulted in the more cooking loss. Increasing the voltage gradient was more effective on WHC compared to the temperature. Finally, the process was optimized and the optimized condition was achieved by setting the voltage gradient at 30 V/cm, process time at 4 min, and temperature at 66 °C. Also, it was compared with conventional heating. The results were shown that the differences between the mean values of all responses were statistically significant (p < 0.05) except for pH. Therefore, ohmic method was carried out faster, with lower temperature and obtaining the highest WHC and lowest total plate count, peroxide value, cooking loss, and optimized pH. Generally, this study suggested that the ohmic heating can be used as a rapid and homogeneous cooking method for the preparation of sausages from greater lizardfish as a commercial low-valued fish.

Optimization of chemical solution concentration and exposure time in the alkaline pretreatment applied to sugarcane bagasse for methane production.

ABSTRACTSugarcane is the most traded crop in the world, with Brazil being the world's largest producer. Sugarcane processing generates up to 28% of sugarcane bagasse (SB) from the entire plant, with only 50% of it used for energy generation. SB is a lignocellulosic biomass that can be converted into biogas. However, the optimization of pretreatment process parameters is essential for its successful scaling up. This study evaluated the effect of mild alkaline pretreatment of SB using NaOH and KOH at concentrations of 1-10% and exposure time of 1-12 hours) on the biochemical methane potential (BMP) under mesophilic temperature. The central composite rotatable design (CCRD) was applied as statistical tool to generate optimal operating pretreatment conditions. The tests were performed in triplicates totalizing 84 batch bottles. The BMP of the untreated SB varied between 297-306 LN CH4 kg VS-1 while the BMP of the pretreated samples with NaOH and KOH were 19% and 20% higher. The optimized conditions were NaOH at 7.7% and KOH at 8.3% KOH for 12 hours. However, the range indicated by the statistical design with CCRD revealed that there was no statistical difference in terms of methane yield when concentrations between 4-10% NaOH and 6-10% KOH during 12 hours were applied, when compared to the specific optimized points. The optimization of the pretreatment parameters demonstrated to be a key-factor to improve the anaerobic digestion of lignocellulosic substrates, leading to a less chemically dependent and more sustainable approach, while allowing a more profitable process.

Optimization of a novel vacuum sublimation-rehydration thawing process.

To better guarantee the quality of the thawed meat, maximize the thawing rate, and minimize the system energy consumption, the multiparameter and multi-objective coupling optimizations for the newly proposed vacuum sublimation-rehydration thawing (VSRT) process was conducted. The polynomial nonlinear regression equations of single and comprehensive objectives were established by the central composite rotatable design, and the corresponding test of fitting degree and the analysis of influencing factors order were carried out. Furthermore, the interaction effects of influencing factors were investigated through the response surface methodology and were experimentally validated to obtain the optimal process parameters. The results showed that the established regression equations were in good agreement with the experimental values. For the different objectives, there were great differences in the influence order and interaction of factors. In the sublimation and rehydration stages, there existed an optimal region in the response surface to achieve a better value for the single and comprehensive objectives. When the sublimation time was 19 min, the heating plate temperature was 26°C, the rehydration water volume was 1634 ml, the rehydration water temperature was 29°C, the thawing time was relatively short (1.00 h), and the thawing loss (1.19%), the total color difference (1.02), and the system-specific energy consumption (0.026 kW h/kg) were relatively low. The comprehensive performance of the VSRT system reached the best state. PRACTICAL APPLICATION: The purpose of this work is to make the novel vacuum sublimation-rehydration thawing method not only better guarantee the quality of thawed meat but also maximize the thawing rate and minimize the energy consumption of the system, which can provide a new idea and reference for the development of new high-efficiency thawing equipment.

Central Composite Optimization of Glycerosomes for the Enhanced Oral Bioavailability and Brain Delivery of Quetiapine Fumarate.

This study aimed to formulate and statistically optimize glycerosomal formulations of Quetiapine fumarate (QTF) to increase its oral bioavailability and enhance its brain delivery. The study was designed using a Central composite rotatable design using Design-Expert® software. The independent variables in the study were glycerol % w/v and cholesterol % w/v, while the dependent variables were vesicle size (VS), zeta potential (ZP), and entrapment efficiency percent (EE%). The numerical optimization process resulted in an optimum formula composed of 29.645 (w/v%) glycerol, 0.8 (w/v%) cholesterol, and 5 (w/v%) lecithin. It showed a vesicle size of 290.4 nm, zeta potential of -34.58, and entrapment efficiency of 80.85%. The optimum formula was further characterized for DSC, XRD, TEM, in-vitro release, the effect of aging, and pharmacokinetic study. DSC thermogram confirmed the compatibility of the drug with the ingredients. XRD revealed the encapsulation of the drug in the glycerosomal nanovesicles. TEM image revealed spherical vesicles with no aggregates. Additionally, it showed enhanced drug release when compared to a drug suspension and also exhibited good stability for one month. Moreover, it showed higher brain Cmax, AUC0-24, and AUC0-∞ and plasma AUC0-24 and AUC0-∞ in comparison to drug suspension. It showed brain and plasma bioavailability enhancement of 153.15 and 179.85%, respectively, compared to the drug suspension. So, the optimum glycerosomal formula may be regarded as a promising carrier to enhance the oral bioavailability and brain delivery of Quetiapine fumarate.

Unsymmetrical aromatic disulfides as SARS-CoV-2 Mpro inhibitors: Molecular docking, molecular dynamics, and ADME scoring investigations.

COVID-19 pandemic caused by very severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) agent is an ongoing major global health concern. The disease has caused more than 452 million affected cases and more than 6 million death worldwide. Hence, there is an urgency to search for possible medications and drug treatments. There are no approved drugs available to treat COVID-19 yet, although several vaccine candidates are already available and some of them are listed for emergency use by the world health organization (WHO). Identifying a potential drug candidate may make a significant contribution to control the expansion of COVID-19. The in vitro biological activity of asymmetric disulfides against coronavirus through the inhibition of SARS-CoV-2 main protease (Mpro) protein was reported. Due to the lack of convincing evidence those asymmetric disulfides have favorable pharmacological properties for the clinical treatment of Coronavirus, in silico evaluation should be performed to assess the potential of these compounds to inhibit the SARS-CoV-2 Mpro. In this context, we report herein the molecular docking for a series of 40 unsymmetrical aromatic disulfides as SARS-CoV-2 Mpro inhibitor. The optimal binding features of disulfides within the binding pocket of SARS-CoV-2 endoribonuclease protein (Protein Data Bank [PDB]: 6LU7) was described. Studied compounds were ranked for potential effectiveness, and those have shown high molecular docking scores were proposed as novel drug candidates against SARS-CoV-2. Moreover, the outcomes of drug similarity and ADME (Absorption, Distribution, Metabolism, and Excretion) analyses have may have the effectiveness of acting as medicines, and would be of interest as promising starting point for designing compounds against SARS-CoV-2. Finally, the stability of these three compounds in the complex with Mpro was validated through molecular dynamics (MD) simulation, in which they displayed stable trajectory and molecular properties with a consistent interaction profile.