Surgical Orthodontic Treatment for Skeletal Maxillary Protrusion in Sturge-Weber Syndrome: A Case Report and Review of the Literature.

Sturge-Weber syndrome (SWS) is characterized by hemangiomas, glaucoma, and central nervous system disorders. Here, we report the case of a 15-year-old boy with SWS and upper-lip hypertrophy who underwent surgical orthodontic treatment for correction of a large overjet and deep overbite. In addition to the a large overjet and deep overbite, interdental spacing was observed in both the arches. The mandible was retrognathic and deviated to the right side. No maxillary occlusal canting or temporomandibular joint symptoms were observed. The patient was diagnosed with skeletal maxillary protrusion with spaced dentition and mandibular deviation to the right due to SWS. After presurgical orthodontic treatment using a multibracket appliance, we performed a sagittal split ramus osteotomy (SSRO) alone due to the presence of a hemangioma around the maxilla. No abnormal bleeding or cerebral hemorrhage due to increased blood pressure was observed during the SSRO. Postoperatively, the maxillary and mandibular arches were well-aligned, the deep overbite and excessive overjet improved, and bilateral angle class I molar and canine relationships were established. Furthermore, mandibular deviation improved, and the midlines of both arches approximately coincided with the facial midline. In conclusion, orthognathic surgery is feasible in patients with SWS after carefully evaluating the sites and sizes of the hemangiomas.

Minimally invasive sagittal osteotomy-technical note.

This article describes a novel minimally invasive technique for bilateral sagittal split osteotomy (BSSO) that aims to reduce surgical trauma while maintaining bone overlap and rigid internal fixation for proper consolidation of the bone segments. The technique involves a small vestibular mucoperiosteal incision made on the lateral aspect of the mandible between the first and second molars, enabling a standard ramus split, surgical segment movement, and miniplate fixation. A retrospective evaluation of 67 consecutive patients who underwent BSSO using this protocol showed favorable split of the mandible with no unfavorable splits or non-union. Patients were discharged from hospital within an average of 17 h with minimal postoperative complications. This technique provides good surgical visualization with a very small incision and allows standard BSSO surgery without difficulty.

Change in taste sensation after orthognathic surgery.

OBJECTIVE: The objective of this study was to evaluate the effect of orthognathic surgery on taste sensation. MATERIALS AND METHODS: Thirty-five patients scheduled to undergo Le Fort I osteotomy (LFIO), sagittal split ramus osteotomy (SSRO), and bimaxillary surgery (BMS) were evaluated by administering localized and whole-mouth taste tests preoperatively and postoperatively at months 1, 3, and 6. The patients were asked to identify the quality of four basic tastes applied to six locations on the palate and tongue and to rate the taste intensities they perceived. Taste recognition thresholds and taste intesity scores were evaluted according to operation groups and follow-ups. RESULTS: There were significant decreases in the quinine HCl recognition thresholds at the postoperative follow-ups compared to the preoperative in LFIO patients (p = 0.043). There were significant decreases in sucrose taste intensity scores in the right posterolateral part of the tongue at months 3 and 6 compared to preoperative in SSRO patients (p = 0.046), and significant increases in quinine HCL taste intensity scores in the right and left anterior parts of the tongue at month 6 compared to preoperative in LFIO patients (p < 0.05). CONCLUSION: Taste perception is affected due to potential damage to the chemosensory nerves during orthognathic surgical procedures. Generally, non-significant alterations have been observed in taste perception after orthognathic surgery, except for significant alterations in bitter and sweet taste perceptions. CLINICAL RELEVANCE: Maxillofacial surgeons should be aware of taste perception change after orthognathic surgery procedures and patients should be informed accordingly. THE TRIAL REGISTRATION NUMBER (TRN): NCT06103422/Date of registration: 10.17.2023 (retrospectively registered).

Anesthetic management of a patient with Sturge-Weber syndrome in sagittal split ramus osteotomy surgery.

Sturge-Weber syndrome (SWS) is a neurocutaneous syndrome characterized by angiomas. This report presents airway management using submental intubation in sagittal split ramus osteotomy under general anesthesia and aimed to explore better anesthetic management for avoiding the rupture of angiomas in a patient with SWS.

Which factors affect the lingual fracture pattern in sagittal split ramus osteotomy?

The purpose of this study was to elucidate the effects of mandibular anatomy and osteotomy technique on lingual fracture patterns in SSRO. The predictor variables were: length of horizontal medial osteotomy; type of border osteotomy; buccolingual width; and vertical length of the basal cortex. The outcome variable was the type of lingual split pattern. This was categorized into four types according to a lingual split scale (LSS): LSS 1, true Hunsuck; LSS 2, fracture line to posterior border of the ramus; LSS 3, through to mandibular canal; LSS 4, unfavorable fracture pattern. Data were analyzed using analysis of variance and the Pearson χ2 test. Values of p < 0.05 were considered statistically significant. The study sample comprised 312 lingual split patterns in 156 patients. The most common type of lingual split pattern was LSS 1 (n = 204). There was a significant relationship between inferior border osteotomy type and LSS type (p = 0.001). Whilst LSS 1 was the most common among all border osteotomy types. LSS 4 was most frequently observed in cases where the lower border osteotomy remained in the buccal surface. According to the results of this study, the likelihood of an unfavorable split pattern increases when the lower border osteotomy remains in the buccal surface.

Contrast-enhanced computed tomography of retromandibular vein position and course patterns relative to the mandible during sagittal split ramus osteotomy.

Background: Sagittal split ramus osteotomy is an established procedure used in oral and maxillofacial surgery. Major bleeding is representative intraoperative complication involves vessels such as the inferior alveolar, facial, and maxillary arteries and accompanying veins, in particular the retromandibular vein (RMV). We previously described the RMV course patterns using embalmed cadavers. However, owing to the possible influence of formalin fixation and unclear skeletal classification of the jaws, the present study aimed to use contrast-enhanced computed tomography to confirm the RMV in patients with defined jaw deformities. Methods: Twenty patients with orthognathic jaw deformities (40 sides) were included. The RMV and the lateral and posterior views of the mandible were evaluated using contrast-enhanced computed tomography. Course patterns and RMV positions were classified as previously reported. Results: Three patterns were identified in the lateral view. Type A: RMV posterior to the posterior border of the ramus (n=25; 62.5%). Type B: adjoining the posterior border of the ramus (n=12; 30.0%). Type C: anterior to the posterior border of the ramus (n=3; 7.5%). Five course patterns were identified in the posterior view. Pattern I: rectilinear course running medial to the posterior border of the ramus (n=3; 7.5%). Pattern II: diagonal course running medially from immediately posterior to posterior border of the ramus (n=11; 27.5%). Pattern III: rectilinear course running immediately posterior to the posterior border of the ramus (n=12; 30.0%). Pattern IV: diagonal course running from lateral to medial relative to the posterior border of the ramus (n=8; 20.0%). Pattern V: diagonal course running from lateral to immediately posterior relative to the posterior border of the ramus (n=6; 15.0%). In the no-course pattern group, the RMV inferior to the lingula was lateral to its position and superior to that of the lingula. In half of the cases, the left and right sides exhibited different running patterns. We observed no correlation between the skeletal patterns of jaw deformities and the course of the RMV. Conclusions: Type B/Pattern II that runs in a straight line bordering the posterior margin of the ramus requires the most attention during surgery. These findings suggest the possibility of predicting intraoperative bleeding risk.

Simultaneous standard total joint prosthesis reconstruction with SSRO and Le Fort I osteotomy in the treatment of unilateral temporomandibular joint ankylosis with jaw deformity: a case cohort study.

OBJECTIVE: Unilateral temporomandibular joint ankylosis with jaw deformity (UTMJAJD) may require simultaneous total joint prosthesis (TJP) reconstruction, sagittal split ramus (SSRO), and Le Fort I osteotomies. The purpose of this study was to evaluate outcomes in patients treated with these procedures. METHODS: Patients diagnosed UTMJAJD between 2016 and 2018 were selected for the study. Mandible-first procedure was performed after ankylosis release with TJP on the ankylosed side and SSRO on the contralateral side. Le Fort I osteotomy with and without genioplasty was lastly performed. Maximal incisor opening (MIO), facial symmetry, and jaw and condyle stability were compared before, after operation, and during follow-ups. RESULTS: Seven patients were included in the study. Their average chin deviation was 9.5 ± 4.2 mm, and maxillary cant was 5.1 ± 3.0°. After operation, jaw deformity significantly improved, with chin deviation corrected 7.6 ± 4.1 mm (p = 0.015) and advanced 5.9 ± 2.5 mm (p = 0.006). After an average follow-up of 26.6 ± 17.1 months, MIO significantly increased from 11.4 ± 9.3 to 35.7 ± 2.6 mm (p = 0.000). The occlusion was stable with no significant positional or rotational changes of the jaw (p > 0.05). There was no obvious condylar resorption during follow-ups. CONCLUSION: Simultaneous TJP reconstruction, SSRO, and Le Fort I osteotomy are reliable and effective methods for the treatment of UTMJAJD.

Mandibular autorotation: a critical virtual parameter in clinical decision-making regarding maxilla-first versus mandible-first sequence.

Large degrees of mandibular autorotation during intermediate splint design are prone to transfer error and decrease accuracy. The purpose of this study was to evaluate the amount of mandibular autorotation necessary to design intermediate splints for maxilla- and mandible-first sequences using virtual planning software, to help the clinical decision-making regarding the most adequate sequence for each patient. The influence of specific orthognathic movements (different vertical and sagittal changes at the Le Fort I level, cant correction) and the type of maxillofacial deformity (skeletal Class II, III, anterior open bite) were evaluated to identify those that would require higher levels of autorotation for each sequence. Three-dimensional virtual surgical planning data of 194 patients were reviewed (126 female, 68 male; mean age 26.5 ± 11.0 years; 143 skeletal Class II, 51 skeletal Class III) and subgroup analyses were conducted using the Kruskal-Wallis test and post-hoc pairwise comparisons. As an additional parameter (mandibular autorotation), maxilla-first is indicated for bimaxillary osteotomies with Le Fort I posterior intrusion, anterior open bite, and skeletal Class III, while mandible-first is recommended for Le Fort I global extrusion, especially with maxillary cant correction.

Long-term evaluation of condylar positional and volumetric parameters and skeletal stability in Class III bimaxillary orthognathic surgery patients.

This retrospective study examined long-term (4-5 years) condylar positional and volumetric changes and skeletal stability after bimaxillary orthognathic surgery in skeletal Class III patients. Pre-surgical (T0: 0.9 ± 1.1 months) and post-surgical (T1: 0.6 ± 0.7 months; T2: 12.8 ± 3.1 months; T3: 56.5 ± 6.5 months) cone beam computed tomography (CBCT) images of 22 patients were obtained. CBCT multiplanar reformation (MPR) images were generated, and three-dimensional (3D) condylar models were constructed and superimposed to compare changes in condylar volume from pre- to postoperative. Condylar position in the sagittal and coronal planes altered immediately after surgery; however at long-term follow-up, the condyles had returned to their pre-surgical position. The condyles remained slightly inwardly rotated at short-term (-2.6°, 95% confidence interval -3.5° to -1.7°) and long-term (-1.9°, 95% confidence interval -2.8° to -1.0°) follow-up. Changes in condylar volume were insignificant after surgery. Condylar positional changes had no effect on skeletal stability. However, patients with an increased face height prior to surgery and more retrusive jaw position postoperatively were more prone to condylar resorption. Surgical changes remained stable 4-5 years after surgery. In conclusion, condylar position changed insignificantly following surgical correction in Class III patients provided that the correct surgical technique was employed.

Investigation of the efficacy of two different laser types in the treatment of lower lip paresthesia after sagittal split ramus osteotomy.

Orthognathic surgery involves invasive and major surgical procedures commonly used to correct maxillofacial deformities. Bilateral sagittal split ramus osteotomy (BSSO) is often used to treat dentofacial anomalies related to the mandible, but it can result in various complications, the most common of which is inferior alveolar nerve damage. Nerve damage-induced paresthesia of the lower lip significantly affects patient comfort. Medical treatments such as steroids and vitamin B, low-level laser therapy (LLLT), and platelet-rich fibrin (PRF) can be used as supportive therapies for nerve regeneration after damage. This study aimed to investigate the effectiveness of two different types of lasers in treating lower lip paresthesia after BSSO. This clinical trial was a controlled, single-center, prospective, single-blind, randomized study. Thirty patients were included in the study and randomly assigned to three groups: Group I (laser GRR, n = 10) received transcutaneous and transmucosal GRR laser treatment, Group II (Epic10 laser, n = 10) received transmucosal and transcutaneous Epic10 laser treatment, and Group III (vitamin B, n = 10) received B-complex vitamin tablets orally once a day. Two-point and brush tests were performed six times at specific intervals, and a visual analog scale was used to evaluate pain and sensitivity. Both vitamin B and laser therapies accelerated nerve regeneration. The contribution of the laser groups to the healing rate was better than that of the vitamin B group. Although there was no statistically significant difference between the two laser groups, clinical observations indicated better results in the GRR laser group.

Determining the safety margin of mandibular lingula in sagittal split ramus osteotomy.

PURPOSE: The anatomical position of the lingula is clinically very important to prevent injuries during sagittal split ramus osteotomy. Our study aims to evaluate the localisation of the lingula by cone beam computed tomography (CBCT) and to compare the localisation of the lingula between malocclusion, gender, and lingula types. METHODS: A retrospective study was conducted to evaluate the shape and location of the lingula using CBCT. A total of 250 CBCT images were included in this study. The lingula was classified as nodular, assimilated, truncated, or triangular type. Six defined distances from the top of the lingula were measured: anterior border of the ramus (L-A), posterior border of the ramus (L-P), internal oblique ridge (L-IOR), mandibular notch (L-N), and distal surface of the mandibular second molar (L-M2) and occlusal plane (L-OP). The measured distances were compared between gender, malocclusion, and lingula types. RESULTS: The most common type of lingula was nodular (32.4%). The L-N, L-P, L-M2, and L-OP distances between genders were statistically higher in male patients than in female patients. The L-IOR, L-M2, and L-OP distances exhibited statistically significant differences found between malocclusions. No statistically significant difference was found when the distances of the lingula to the anatomical points were compared between the lingula types. CONCLUSION: These variations in positioning of the lingula depending on the dysmorphoses are developing towards a systematic 3D examination before any mandibular osteotomy to precisely visualize the position and shape of the lingula.

A finite element analysis of stress distribution with various directions of intermaxillary fixation using orthodontic mini-implants and elastics following mandibular advancement with a bilateral sagittal split ramus osteotomy.

OBJECTIVE: This finite element analysis (FEA) aimed to assess the stress distribution in the mandible and fixation system with various directions of the intermaxillary fixation (IMF) using mini-implants (MIs) and elastics following mandibular advancement with a bilateral sagittal split ramus osteotomy (BSSRO). MATERIALS AND METHODS: A total of nine mandibular advancement models were set according to the position of the MIs (1.6 mm in diameter, 8 mm in length) and direction of the IMF elastics (1/4 inch, 5 oz). Major and minor principal stresses in the cortical and cancellous bones, von Mises stresses in the fixation system (miniplate and monocortical screws), and bending angles of the miniplate were analysed. RESULTS: Compressive and tensile stress distributions in the mandible and von Mises stress distributions in the fixation system were greater in models with a Class III IMF elastic direction and a higher IMF elastic force than in models with a Class II IMF elastic direction and a lower IMF elastic force. The bending angle of the miniplate was negligible. CONCLUSIONS: Stress distributions in the bone and fixation system varied depending on the direction, amount of force, and position of IMF elastics and MIs. Conclusively, IMF elastics in the Class II direction with minimal load in the area close to the osteotomy site should be recommended.

Assessment of temporomandibular joint disc position and skeletal stability after bimaxillary surgery.

PURPOSE: This study aimed to assess the correlation between temporomandibular joint (TMJ) disc position and skeletal stability and identify the cephalometric measurements associated with relapse after bimaxillary surgery. METHODS: The participants were 62 women with jaw deformities (124 joints) who underwent bimaxillary surgery. The TMJ disc position was classified into four types (anterior disc displacement (ADD), anterior, fully covered, and posterior) using magnetic resonance imaging, and cephalometric analysis was performed preoperatively and 1 week and 1 year postoperatively. The differences between pre- and 1-week postoperative values (T1) and 1-week and 1-year postoperative value (T2) were calculated for all cephalometric measurements. Moreover, the relationship between skeletal stability using cephalometric measurements, skeletal class, and TMJ disc position was analyzed. RESULTS: The participants included 28 patients in class II and 34 in class III. There was a significant difference in T2 in SNB between class II mandibular advancement cases and class III mandibular setback cases (P = 0.0001). In T2, in ramus inclination, there was a significant difference between the ADD and posterior types (P = 0.0371). Stepwise regression analysis revealed that T2 was significantly correlated with T1 for all measurements. However, the TMJ classification was not applied to all measurements. CONCLUSION: This study suggested that TMJ disc position, including ADD, could not affect skeletal stability, including the maxilla and distal segment after bimaxillary osteotomy, and short-term relapse could be related to the movement amount or angle change by surgery for all measurements.

Morphological Changes of the Mandibular Angle After Orthognathic Surgery with Class III Deformity in East Asia.

The aims of this study were to analyze the morphological changes of the mandibular angle after orthognathic surgery for mandibular setback and investigate related factors. This retrospective study included patients from January 2017 to December 2021 diagnosed with skeletal class III deformity who underwent BSSRO (Group I) or bimaxillary surgery (Group II). Preoperative (T0), within 1 month postoperatively (T1), and 6 months postoperatively (T2) CT scans were collected from 61 patients to three-dimensionally analyze the proximal segment displacement, the linear and angular changes of the mandibular angle. The gonion points moved posteriorly and laterally (P < 0.001), while the inferior movement was not significant (P = 1.000, P = 0.274). The intergonial width increased by 3.32 ± 1.87 mm and 2.34 ± 1.77 mm as revealed by T2 CTs, respectively, in Group I and Group II. Mandibular angle decreased in both groups and by 1.41 ± 2.95° in Group I and 1.37 ± 3.41° in Group II. The increase in intergonial width between T1 and T0 was negatively correlated with the preoperative mandibular angle (P = 0.003) and positively correlated with the transverse outward movement of the proximal segment (P < 0.001). After surgery, the intergonial width increased and the inferior and posterior border of the proximal segment flared outward. The changes in intergonial width and mandibular angle were mainly related to the rotation of the proximal segment, which has a certain impact on the aesthetics of the lower face. Therefore, controlling the position of the proximal segment is of vital importance to lessen the changes in the mandibular angle area.Level of Evidence III. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Comparison of the skeletal stability after mandibular counter-clockwise rotation in three surgical procedures.

The treatment of mandibular deformities with an anterior open bite is challenging. In this study, skeletal stability after mandibular osteotomies was evaluated to determine the best treatment for mandibular prognathism with an anterior open bite in three procedures: intraoral vertical ramus osteotomy (IVRO), conventional sagittal split ramus osteotomy (conv-SSRO), and SSRO without bone fixation (nonfix-SSRO). Patients who underwent mandibular osteotomy to correct skeletal mandibular protrusion were included. Changes in skeletal and soft tissues were assessed using lateral cephalograms taken before (T1), 3 ± 2 days (T2), and 12 ± 3 months (T3) after surgery. Thirty-nine patients were included: nine in the IVRO group and 11 and 19 in the conv- and nonfix-SSRO groups, respectively. The mandibular plane angles (MPAs) of the T2-T1 were - 2.7 ± 2.0 (p = 0.0040), - 3.7 ± 1.7 (p < 0.0001), and - 2.3 ± 0.7 (p < 0.0001) in the IVRO, conv-SSRO, and nonfix-SSRO groups, respectively. The skeletal relapse of the MPAs was not related to the MPA at T2-T1, and it was approximately 1.3° in the conv-SSRO group. The skeletal relapse of the MAPs was significantly correlated with the MPA of T2-T1 in the IVRO (p = 0.0402) and non-fix-SSRO (p = 0.0173) groups. When the relapse of the MPAs was less than 1.3°, the MPA of T2-T1 was calculated as 2.5° in the nonfix-SSRO group. When the MPA of T2-T1 is less than 2.5°, non-fix SSRO may produce a reliable outcome, and when it is more than 2.5°, conv-SSRO may produce better outcomes.

Effects of sagittal split Ramus osteotomy on condylar position and Ramal orientation in patients with mandibular asymmetry.

OBJECTIVE: The purpose of this study is to assess the impact of Sagittal Split Ramus Osteotomy (SSRO) on the alignment of the condyle and orientation of the Ramal segment following surgery in patients operated for the correction of mandibular asymmetry. METHODS: A total of 27 patients who underwent SSRO were enrolled in this study, and study groups were defined as asymmetric (study group) and symmetric (control group) using linear measurements from the dental midline based on a three-dimensional coordinate system. Differences on preoperative and postoperative values of anterior (AJS), posterior (PJS) and superior joint spaces (SJS), condylar axial angle (CAA), Sagittal Ramal Angle (SRA), and Coronal Ramal Angles (CRA) of study and control groups were measured and compared. The data was analyzed using the "Wilcoxon signed-ranks test" to identify differences between groups. RESULTS: Differences between preoperative and postoperative values of CRA and SRA of the contralateral group showed statistically significant results with p-values of 0.007 and 0.005, respectively. A statistically significant change in CAA angle was found in the control and deviation groups (p = 0.018 and p = 0.010, respectively). CONCLUSIONS: SSRO has inevitable effects on the condylar and ramal orientation. Individuals with asymmetry require particular attention throughout the planning process and beyond. Conjunctive modalities and modifications should be considered and utilized when necessary. Future studies with larger sample sizes, homogenous follow-up periods, and more comprehensive clinical data are needed to substantiate understanding of the response of the condylar segment. CLINICAL RELEVANCE: Orthognathic surgeries inevitably alter the alignment and harmony of temporomandibular structures and may result in change of AJS, PJS, SJS, CAA, SRA, and LRA, which may change the biomechanics of joint and lead to several complications like temporomandibular disorders. Especially in cases with midline asymmetry needs special consideration from planning till the end of the treatment to achieve best results. In severe cases, conjunctive modalities and modifications and other alternatives such as inverted-L osteotomies should be considered.

Comperative evaluation of the current and new design miniplate fixation techniques of the advanced sagittal split ramus osteotomy using three-dimensional finite element analysis

Background: The aim of this study was to evaluate the stress occurring in the fixation systems both developed in various geometric designs for this study and currently used in sagittal split ramus advancement osteotomy using finite element analysis. Material and Methods: The finite element model that imitates three-dimensional sagittal split advancement osteotomy was fixed in 10 different miniplate fixation methods: one miniplate fixed with four monocortical screws in a horizontal and oblique pattern; four-hole two miniplates with eight monocortical screws; five-hole miniplate fixed with four monocortical and one bicortical screws; six-hole straight and curved miniplates fixed with six monocortical screws in different geometric designs. Unilateral masticatory muscle loads that have previously determined in the literature were applied to the model at the anatomical muscle attachment regions and the data obtained from finite element analysis and static linear analysis methods were recorded as Von mises, maximum principle and minimum principle stress values. Results: It was observed from the results that maximum stress occurred in Group 1, which consisted of double backward T-shaped miniplate with 6-holes and, minimum stress occured in group 10, which mimiced hybrid system with one miniplate and four monocortical and one bicortical screws. Conclusions: Based on our results, the stress on the miniplates changes according to the geometric designs and the stress on the miniplate decreases as the numbers of miniplates and bars increase. The hybrid miniplate may be preferred by the surgeon as it will be exposed to less stress in excessive mandibular advancements by using the advantages of both the miniplate and the bicortical screw. (AU)

Factors affecting progressive facial swelling immediately after orthognathic surgery: A retrospective cohort study.

The aim of this study was to identify clinical factors associated with progressive facial swelling after orthognathic surgery. Patients diagnosed with jaw deformities and undergoing orthognathic surgery were retrospectively evaluated, and those with surgical site infection, Le Fort I osteotomy, or genioplasty only were excluded. Facial swelling volume was calculated by comparing facial volume preoperatively and three days postoperatively using 3D images and image analysis software (VECTRA H2). FXIII was measured within three days after surgery in only patients with unexplained postoperative bleeding or hematoma. The correlation between facial swelling volume and clinical factors was statistically analyzed. Facial swelling volume was examined in 78 patients. Univariate analysis showed a significant difference between facial swelling volume (mean = 41.6 cm3) and operation time (mean = 209.3 min, r = 0.283, p = 0.012), ΔHb level (mean = 1.18 g/dL, r = 0.235, p = 0.039), as well as decreased factor XIII activity (mean = 75.3%, p = 0.012). Multivariate analysis showed a significant difference between facial swelling volume and FXIII deficiency (standard error = 6.44, p = 0.031).Progressive facial swelling immediately after orthognathic surgery may be due to factor XIII deficiency.

Risk factors for postoperative infection after bilateral sagittal split ramus osteotomy: A retrospective analysis.

BACKGROUND: This retrospective clinical study investigated risk factors for infection following bilateral sagittal split ramus osteotomy (BSSO) as orthognathic surgery, including the patients' general condition, local factors, and surgical factors. PATIENTS AND METHODS: The cases of 160 mandibular sites of 80 Japanese patients (26 males, 54 females; mean ± SD age: 25.3 ± 7.7 years, range 16-55 yrs) with a jaw deformity who underwent BSSO orthognathic surgery at our Department of Oral and Maxillofacial Surgery between Jan. 2017 and Dec. 2022 were analyzed. Potential risk factors were classified as clinical predictive variables. Descriptive and univariate statistics were computed. A multivariate analysis was performed with logistic regression. RESULTS: Fifteen mandibular sites (9.4 %) were complicated with postoperative infection. The multivariate analysis revealed significant differences in facial asymmetry (OR 24.0, p = 0.0002) and the amount of mandibular movement (OR 0.664, p = 0.011) between the sites with and without infection. CONCLUSIONS: Among clinical variables, facial asymmetry was the strongest risk factor for post-BSSO infection, followed by the amount of mandibular movement.

Impact of the lateral skeletal stability following bilateral sagittal split ramus osteotomy for mandibular asymmetry.

This study evaluated the stability of bilateral sagittal split ramus osteotomy (BSSRO) associated with positional plagiocephaly and temporal and masseter muscles using posteroanterior cephalogram analysis and three-dimensional computed tomography (3D-CT). This retrospective cohort study included 31 patients who underwent BSSRO for mandibular asymmetry. The cranial vault asymmetry index (CVAI) and the cephalic index were used as indicators of positional plagiocephaly. The distance from the vertical reference line to the menton (Me) was measured on posteroanterior cephalograms immediately and 1 year after surgery, and postoperative stability was assessed. Temporal and masseter muscles were constructed from 3D-CT data and their volumes were measured. Simple regression analysis showed a significant correlation between postoperative changes in the vertical reference line to the Me and the CVAI (R = 0.56, p = 0.001), the amount of surgical movement in the vertical reference line to the Me (R = 0.41, p = 0.023), and the variable temporal muscle volume (R = 0.27, p = 0.028). There was no significant correlation between postoperative changes in the vertical reference line to the Me and the cephalic index (R = 0.093, p = 0.62) and variable masseter muscle volume (R = 0.16, p = 0.38). According to multivariate analysis, CVAI (p = 0.003) and amount of surgical movement in the vertical reference line to the Me (p = 0.014) were significant predictors of postoperative change in the vertical reference line to the Me. Positional plagiocephaly and amount of surgical movement influence lateral skeletal stability following BSSRO for mandibular asymmetry.