Effect of impacted mandibular third molar extraction on periodontal microbiota and clinical parameters of adjacent teeth: A randomized clinical trial.

It is urgently necessary to clarify the effect of extraction of impacted mandibular third molar (IMTM) on the periodontal tissue of adjacent second molars (ASMs). In this study, the ASM periodontal condition and pathogenic microbes were assessed before IMTM extraction and at 1, 4, 8 and 12 weeks postoperatively. Based on the inclusion and exclusion criteria, our study revealed that IMTM extractions adversely affected distal － periodontal probing depth (dPPD), attachment loss (dAL), plaque index (dPLI) and bleeding on probing (dBOP) within 8 weeks, but these indices gradually normalize after 12 weeks. The subgingival pathogens near the ASMs distal surface, Porphyromonas and Pseudomonas, were significantly increased postoperatively. Moreover, relevance of ASMs clinical indices and subgingival microbes after IMTM extractions was found. In contrast to the situation in chronic periodontitis, the effects of IMTM extraction on dPPD, dAL, dPLI and dBOP of ASMs were mainly correlated with Pseudomonas. Additionally, while the IMTM extractions have adverse distal periodontal indices of ASMs within 8 weeks and increase subgingival pathogens, the modified triangular flap (MTF) had fewer distal periodontal indices and less Pseudomonas. Compared to the traditional envelope flap and triangular flap, the MTF benefits the periodontal health, which could be considered as the priority option for IMTM extractions.

Brass wire ligation for treatment of the ectopic eruption of the mandibular second molar: a case report.

Ectopic eruption of the second permanent molar is a tooth replacement disorder during adolescence. If not treated in time, it can cause hard tissue of the adjacent first molar resorption, early tooth loss, decreased chewing efficiency, and other serious malocclusions. Timely detection and treatment of ectopic eruption of the second permanent molar are of great significance in preventing malocclusions in adolescents and establishing normal occlusion relationships. However, current case reports on the ectopic eruption of the mandibular second molar are relatively rare and are mostly concentrated on surgical and orthodontic treatments, and long-term follow-up is lacking. This paper reports a case in which brass wire ligation was used to treat ectopic eruption of the mandibular second permanent molar, allowing the permanent teeth to erupt smoothly and establish a normal occlusion. The patient was observed for five years after the operation. The occlusion was stable, and the tooth root development, pulp vitality, and periodontal conditions were normal. This paper provides a clinical approach that is short in treatment duration, simple, and minimally invasive for young mandibular second permanent molars with moderate mesial inclination and partial eruption. This method is of importance in helping children establish physiological occlusion.

Diving Deep: Exploring Dual Palatal Canals in the Upper Second Molar.

Dental anatomy exhibits considerable variation with the presence of additional canals being a common occurrence. The upper second molar typically presents with three canals and three roots; however, variations such as the existence of an extra canal or a root can pose challenges during endodontic treatment. Maxillary molar is characterized by an additional canal located within the palatal root, often exhibiting complex configurations and variations in morphology. Access refinement is critical to gaining adequate visibility and facilitating instrumentation. Meticulous exploration of the pulp chamber floor and careful examination of radiographs from different angles are essential for accurate diagnosis. Careful negotiation and cleaning of the extra canal with appropriate files and irrigants are essential to remove pulp tissue and debris effectively. Furthermore, obturation of the canal space with biocompatible materials is crucial to ensure a three-dimensional seal and prevent bacterial ingress. Clinically, the inability to detect and treat the extra palatal canal can lead to persistent infection, incomplete debridement, and compromised treatment outcomes. This case report delves into the significance of this anatomical variation, diagnostic modalities, and effective management strategies.

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation.

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Endodontic Treatment of a Mandibular Second Molar Featuring Vertucci Type V Configuration in the Distal Root: A Case Report.

Successful root canal treatment relies primarily on thorough shaping, cleaning, and filling of the entire root canal system. Neglecting even a single canal can significantly raise the risk of post-treatment apical periodontitis. While the distal root of mandibular second molars typically has one canal, they can also present with anatomical variations, including the presence of a Vertucci Type V configuration. This article discusses a case in which a Vertucci Type V configuration in a mandibular second molar was effectively identified and treated.

Endodontic Treatment of a Maxillary Second Molar With Five Canals: A Case Report and a Literature Review.

A thorough understanding of both common and uncommon root canal anatomies is crucial for the success of root canal treatments, as missing a canal can lead to treatment failure. Although the maxillary second molar typically features three canals, the occurrence of five canals, particularly a mesial buccal third canal (MB3) canal in the mesiobuccal root, is extremely rare. This case report documents such a rare occurrence in a maxillary second molar with five canals. With the assistance of a dental operating microscope, all canals were successfully located, and root canal preparation, irrigation, and filling were accomplished. This case report underscores the significance of in-depth knowledge of root canal anatomy and the invaluable aid of a dental operating microscope in achieving successful root canal treatments.

A clinical case concerning an extraordinary maxillary second molar having two separate palatal roots.

Key Clinical Message: Main objective of root canal therapy is to locate all the canals, cleaning and shaping, and obturation to obtain fluid tight seal. Failure to locate all canals can lead to the failure of root canal therapy. Abstract: Variation of pulp aperture, among teeth with multiple roots, constitutes recurring issue during diagnosing and completing efficient endodontic procedures. Understanding normal anatomy features and associated likely modifications is critical in the effective execution of the dental procedure, since the inability to effectively treat simply one canal may end up into endodontic unsuccessful therapy. The paper covers a procedure whereby the root pattern and canals of the maxillary second molar were modified employing an operative microscope and verified with cone-beam computed tomography (CBCT). Cone-beam computed tomography revealed that the maxillary second molar containing two different palatal roots and canals and two distinct buccal roots and canals. This Research paper presents and investigates the morphological difference observed on the maxillary second molar in order to guarantee the effectiveness of root canal treatment examined utilizing imaging techniques like CBCT.

Identification of Root Canal Morphology in Fused-rooted Mandibular Second Molars From X-ray Images Based on Deep Learning.

INTRODUCTION: Understanding the intricate anatomical morphology of fused-rooted mandibular second molars (MSMs) is essential for root canal treatment. The present study utilized a deep learning approach to identify the three-dimensional root canal morphology of MSMs from two-dimensional X-ray images. METHODS: A total of 271 fused-rooted MSMs were included in the study. Micro-computed tomography reconstruction images and two-dimensional X-ray projection images were obtained. The ground truth of three-dimensional root canal morphology was determined through micro-computed tomography images, which were classified into merging, symmetrical, and asymmetrical types. To amplify the X-ray image dataset, traditional augmentation techniques from the python package Augmentor and a multiangle projection method were employed. Identification of root canal morphology was conducted using the pretrained VGG19, ResNet18, ResNet50, and EfficientNet-b5 on X-ray images. The classification results from convolutional neural networks (CNNs) were then compared with those performed by endodontic residents. RESULTS: The multiangle projection augmentation method outperformed the traditional approach in all CNNs except for EfficientNet-b5. ResNet18 combined with the multiangle projection method outperformed all other combinations, with an overall accuracy of 79.25%. In specific classifications, accuracies of 81.13%, 86.79%, and 90.57% were achieved for merging, symmetrical, and asymmetrical types, respectively. Notably, CNNs surpassed endodontic residents in classification performance; the average accuracy for endodontic residents was only 60.38% (P < .05). CONCLUSIONS: CNNs were more effective than endodontic residents in identifying the three-dimensional root canal morphology of MSMs. The result indicates that CNNs possess the capacity to employ two-dimensional images effectively in aiding three-dimensional diagnoses.

Bilateral distalization of maxillary first molars in a group of adult patients after extraction of maxillary second molars using infra-zygomatic mini-implants: A prospective clinical trial.

BACKGROUND: It is now possible to predictably distalize maxillary first molars in nongrowing patients with the infra-zygomatic gear distalizer and to improve malocclusions without having to extract the premolars and regardless of the patient's compliance. The purpose of this study was to investigate the amount and rate of distal movement of the maxillary first molars using our proposed appliance after extraction of maxillary second molars. METHODS: Ten nongrowing female patients successfully treated with our proposed appliance were the subjects of this study. The amount, rate, and type of distalization, were analyzed through upper jaw cone beam computed tomography (pre- and post-treatment) and scanned casts taken on a monthly interval. RESULTS: The average amount of distalization of the maxillary first molars was 4.03 mm at the crown level and 2.88 mm at the root level. The rate of distalization had an average of 0.61 mm per month with a maximum of 0.79 mm in the first month because of the regional acceleratory phenomena after extracting the maxillary second molar. CONCLUSIONS: The maxillary first molars were distalized in a significant manner and all patients reached a Class I relation within an average duration of 6.4 months. The proposed appliance proved to be a viable noncompliance modality to distalize maxillary first molars correcting maxillary Class II malocclusions characterized by maxillary protrusion or maxillary incisor crowding.

Morphology of the Second Mesiobuccal Canal in the Maxillary Second Molar

SUMMARY: Failure to locate a complete canal system affects the prognosis of root canal treatment. A missed root canal is one of the most common reasons for failed root canal treatment. The prevalence of the second mesiobuccal canal in the maxillary second molar is relatively high and has a variety of configurations. Therefore, knowledge of its morphology is required in clinical endodontics. This review presented the canal in terms of its prevalence, classification, anatomical features, and the method for locating the second mesiobuccal canal in the maxillary second molar. Root canal treatment requires knowledge of tooth morphology, appropriate access preparation, and a thorough examination of the tooth's interior. Thus, clinicians should carefully employ various methods for assessing the anatomy of the entire root canal system to prevent failure in locating the second mesiobuccal canal. This canal can be located by modifying the access cavity design and utilizing specific instruments to improve the second mesiobuccal canal system visualization.

La falta de localización de un sistema completo de canal afecta el pronóstico del tratamiento de éste. La omisión de un tratamiento de canal es uno de los motivos más frecuentes por las que el tratamiento de canal fracasa. La prevalencia del segundo canal mesiovestibular en el segundo molar superior es relativamente alta y tiene una variedad de configuraciones. Por tanto, el conocimiento de su morfología es necesario en endodoncia clínica. Esta revisión presentó el canal en términos de su prevalencia, clasificación, características anatómicas y el método para localizar el segundo canal mesiovestibular en el segundo molar superior. El tratamiento de canal requiere conocimiento de la morfología del diente, una preparación adecuada del acceso y un examen exhaustivo del interior del diente. Por lo tanto, los dentistas deben emplear cuidadosamente varios métodos para evaluar la anatomía de todo el sistema de canales radiculares para evitar fallas en la localización del segundo canal mesiovestibular. Este canal se puede localizar modificando el diseño de la cavidad de acceso y utilizando instrumentos específicos para mejorar la visualización del sistema del segundo canal mesiovestibular.

Risk factors and treatments for impacted permanent second molars.

Background/purpose: Impaction of permanent second molar (PM2) is found occasionally. This study tried to explore the risk factors associated with the impacted PM2 teeth and show how to use different treatment modalities to correct the impaction of PM2 teeth. Materials and methods: This study used three cases of PM2 impaction to show how to identify the risk factors of PM2 impaction and how to remove these risk factors to facilitate the eruption of impacted PM2 teeth to the correct occlusal positions. Results: The first and second cases both showed delayed eruptions of two maxillary PM2 teeth. After resection of the dense fibrotic gingival tissues on the tooth eruption pathway, these two impacted maxillary PM2 teeth finally erupted to the normal occlusal positions by their inherent tooth eruption potential. The second case also had mesioangular impaction of two mandibular PM2 teeth. After odontectomy of teeth 38 and 48, the two impacted mandibular PM2 teeth also erupted to the normal occlusal positions by their inherent tooth eruption potential. The third case had impaction of teeth 17, 27 and 47. After extraction of four third molars and four selected premolars, orthodontic mesialization of four permanent first molars, and orthodontic traction using a mini-screw, the three impacted teeth finally erupted to the normal occlusal positions. Conclusion: We conclude that after removing the obstacles on the tooth eruption pathway, the impacted PM2 teeth usually can erupt to their normal occlusal positions by their inherent tooth eruption potential with or without the assistance of orthodontic traction.

Clinical strategies for successful palato-mesiobuccal canal management-Report of 2 cases.

AIM: To describe the management of the palato-mesiobuccal (PMB) canal in maxillary second molars with fused roots using conventional techniques. SUMMARY: Root canal treatment success hinges upon effectively addressing the intricate and variable anatomy of molar teeth. Failure to do so can lead to persistent infections and treatment failure. Recent advancements in imaging technologies have provided unparalleled insights into dental anatomy, especially in molars. Among these discoveries is the PMB canal, a unique anatomical variant recently reported for the first time in Endodontic literature. This canal, found in maxillary second molars with fused roots and originating from the coronal third of the palatal canal while traversing towards the mesiobuccal root presents challenges in clinical management due to its location. This article is the first to showcase the management of the PMB canal using conventional techniques. In the first case, a 38-year-old male patient presented with asymptomatic irreversible pulpitis in the maxillary second right molar. Following thorough instrumentation and irrigation, the presence of the PMB canal was discovered during root canal preparation. The canal was managed using rotary instruments and obturated successfully, resulting in a symptom-free tooth at an 8-year follow-up. The second case illustrates a similar scenario in a 23-year-old female patient presenting with symptomatic irreversible pulpitis in tooth 17. The PMB canal was identified during treatment and managed using rotary nickel-titanium instruments, leading to a favourable outcome at a 9-year follow-up. KEY LEARNING POINTS: In fused roots of maxillary second molars, a PMB canal might be expected. Exploration of the buccal wall of the palatal canal under magnification after shaping procedures can reveal the PMB canal orifice in fused roots. Small tapers are suggested for the enlargement of the PMB canal. Continuous bleeding spots in the palatal canal might indicate a possible PMB canal orifice in vital cases. The use of an apex locator is suggested for the differential diagnosis of the PMB canal orifice from a perforation site.

Predictor factors of 1-rooted mandibular second molars on complicated root and canal anatomies of other mandibular teeth.

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

Construction of metal endocrown for a short clinical second molar crown.

This case highlights where a metal endocrown was used as a novel technique. The metal endocrown showed promising outcomes during the 5-year follow-up, utilizing a resin base to preserve tissue and act as a stress breaker. This approach was used to preserve the tooth and avoid extraction or periodontal surgery.

Mandibular Third Molar Impaction and Bone Change Distal to the Second Molar: A Panoramic Radiographic Study.

Background: The mandibular third molar is the most frequently impacted tooth. An impacted mandibular third molar (IMTM) can have negative consequences on the adjacent mandibular second molar (MSM), such as bone loss. An IMTM can be identified using orthopantomography (OPG). Our objective is to compare changes in bone level distal to the mandibular second molar (MSM) in patients with an extracted IMTM versus non-extracted IMTM using OPG. Methods: In this retrospective case-control study, 160 orthopantomograms (OPGs) of 80 patients who attended Dental Hospital of the University of Barcelona (HOUB) were randomly selected. Participants were stratified into a study group and control group. Results: Males and females experienced bone gain in the study group and bone loss in the control group. However, the difference in bone-level change was not statistically significant regarding gender in the study group. Within the study group, the age group of 29-39 years demonstrated significant (p-value = 0.042) bone gain after extraction compared to other age groups. However, the control group demonstrated bone loss in all age groups in which the difference is not statistically significant (p-value 0.794). Conclusions: Bone improvements distal to the MSM were observed after the extraction of an IMTM compared to when an IMTM was not extracted.

Endodontic Retreatment of a Mandibular Second Molar With a C-shaped Root Canal Configuration: A Case Report.

Root canal retreatment in mandibular second molars with C-shaped root canal configurations presents notable challenges. This article presents a case of successful root canal retreatment in a mandibular second molar exhibiting this complex configuration. Achieving a successful endodontic outcome in such cases necessitates a comprehensive understanding of the unique root canal anatomy. Moreover, the employment of advanced instruments and techniques is crucial to effectively address the intricacies of the C-shaped root canal system.

Relationship between the impacted mandibular third molar and adjacent second molar' external root resorption by conebean computed tomography analysi / Relación entre la reabsorción de la raíz externa del tercer molar mandibular impactado y el segundo molar adyacente mediante análisis de tomografía computarizada de cono

Background: The relationship between the impacted mandibular third molar (IMTM) and the external root re-sorption (ERR) of the mandibular second molar (MSM) was analysed with cone-beam computed tomography(CBCT). The risk factors affecting the ERR of the MSM were examined to provide a reference.Material and Methods: A total of 327 patients (total: 578 teeth) admitted to the Affiliated Hospital of YanbianUniversity for IMTM extraction from January 2017 to December 2019 was chosen and divided according togender and age. The correlation between the IMTM and ERR of MSM was analysed, including inclination angle,impaction direction and depth. The relationship of mandibular ascending ramus classification with ERR of MSMwas also analysed. In addition, the correlation between the MTM impaction type and the severity of ERR wasanalysed.Results: The incidence of ERR of MSM in male patients was higher than in females (27.9% vs.17.6%, p = 0.018).The occurrence and the site of ERR showed statistical differences in the inclination angle [(≤20°, 3.6%) vs. (21°-40°, 27.1%) vs. (41°-60°, 27.6%) vs. (61°-80°, 25.6%) vs. (>80°, 31.7%), p <0.001], impaction direction [(Vertical,1.1%) vs. (Mesial, 32.7%) vs. (Horizontal, 25.3%), p <0.001] and depth of MTM [(Low position, 38.6%) vs. (Medi-an position, 32.0%) vs. (High position, 13.7%), p <0.001]. Also, there was a significant difference in the mandib-ular ascending ramus type [(Class I, 17.4%) vs. (Class II, 32.3%) vs. (Class III, 44.9%), p <0.001]. In addition, theseverity of ERR showed statistical differences in the mesial (40.9%, p<0.05), lower impaction (54.5%, p<0.05)depth of MTM and type III of mandibular ascending ramus (63.6%, p<0.05).Conclusions: The inclination angle, impaction direction, and depth of MTM were the influencing factors for theoccurrence and site of ERR.(AU)

Evaluation of radiographic visibility of root pulp in mandibular second molars using cone beam computed tomography images for age estimation.

The purpose of this study is to estimate chronological age and determine whether individuals were aged under or over 18 years using root pulp visibility (RPV) in cone-beam computed tomography (CBCT) images. The study included CBCT images of 699 individuals aged between 15 and 75 years. One thousand twenty-three mandibular second molar (2M) teeth were evaluated using Olze's RPV method in four stages. Descriptive statistics of the stages and the relationship between the stages and the chronological age were assessed. The distribution of the stages was analyzed according to the 18-year age threshold. There was a positive correlation between RPV stages and chronological ages in both sexes. For females and males, the mean ages of stage 0, stage 1, and stage 2, for females and males, were found as 27.21, 28.93, and 33.68 years, and 37.69, 40.9, and 44.88 years, respectively. Stage 0 and stage 1 were found both in individuals aged under and over 18 years, and stage 2 and stage 3 were not observed in individuals aged under 18 years. The presence of stage 2 and stage 3 may be an indication that an individual is aged over 18 years according to Olze's RPV age estimation method. For more reliable results, 2M teeth should be examined bilaterally in forensic science.

Evaluation of deproteinised bovine bone matrix combined with absorbable biofilm for the preservation of extraction sites of mandibular impacted wisdom teeth.

BACKGROUND: Bone defects and deep periodontal pockets often exist distal to the second molar after mandibular third molar extraction, seriously threatening the periodontal health of the second molar. OBJECTIVE: To evaluate the effect of socket preservation with bone substitute materials on alveolar bone resorption and prevention of the distal periodontal defect of the adjacent tooth after mandibular impacted third molar extraction compared with natural healing. METHODS: Ninety-nine patients with mandibular impacted teeth, treated in our hospital from January 2018 to December 2020, were randomly divided into the control and experimental groups. The experimental group underwent minimally invasive tooth extraction and socket preservation using the deproteinised bovine bone mineral, Bio-Oss and the bioabsorbable collagen membrane, Bio-Gide. The control group healed naturally after minimally invasive tooth extraction. The alveolar ridge dimension of the extraction sites, the probing depth, tooth mobility and gingival index on the distal aspect of the mandibular second molars were examined and recorded before and six months after the operations. RESULTS: There was a significant difference between the experimental group and the control group in the alveolar bone width (P< 0.05) and height (P< 0.05) before and after surgery. The probing depth of the extraction sites in both groups was reduced. CONCLUSION: Using Bio-Oss and Bio-Gide to preserve extraction sites of impacted teeth can promote recovery more effectively than natural healing on the height of the distal alveolar bone and the width of the alveolar crest of the second molar and thus improve the periodontal status of the adjacent second molar.

Does third molar agenesis influence the second lower molar mineralization?

Different studies have established that the mineralization stages of the second mandibular molar can be used in forensic age estimation. Nowadays, the estimate's accuracy is an ethical concern, producing as few false positives (individuals incorrectly classified as older than a determined threshold) and false negatives (individuals incorrectly classified as younger than a determined threshold) as possible. Some have hypothesized that changes in teeth number may influence tooth mineralization, altering the age estimate process. This paper analyzes whether third molar agenesis affects the second mandibular molar mineralization time frame. To do so, 355 orthopantomograms were evaluated for third molar agenesis, and the second mandibular molar mineralization stage was assessed using the Demirjian stages. Student's t-test was used to compare the difference in the mean age at which the various stages of 37 mineralization were reached in the groups with and without third molar agenesis. The level of statistical significance was set at 5%. The results pointed to a delay in second mandibular molar mineralization in the case of agenesis, suggesting the need to consider this when estimating age using dental techniques.