Waste Symbiosis through the Synthesis of Highly Crystalline LTA and SOD Zeolites.

In recent years, the demand for natural and synthetic zeolites has surged due to their distinctive properties and myriad industrial applications. This research aims to synthesise crystalline zeolites by co-recycling two industrial wastes: salt slag (SS) and rice husk ash (RHA). Salt slag, a problematic by-product of secondary aluminium smelting, is classified as hazardous waste due to its reactive and leachable nature, though it is rich in aluminium. Conversely, RHA, an abundant and cost-effective by-product of the agro-food sector, boasts a high silicon content. These wastes were utilised as aluminium and silicon sources for synthesising various zeolites. This study examined the effects of temperature, ageing time, and sodium concentration on the formation of different zeolite phases and their crystallinity. Results indicated that increased Na+ concentration favoured sodalite (SOD) zeolite formation, whereas Linde type-A (LTA) zeolite formation was promoted at higher temperatures and extended ageing times. The formation range of the different zeolites was defined and supported by crystallographic, microstructural, and morphological analyses. Additionally, the thermal behaviour of the zeolites was investigated. This work underscores the potential to transform industrial waste, including hazardous materials like salt slag, into sustainable, high-value materials, fostering efficient waste co-recycling and promoting clean, sustainable industrial production through cross-sectoral industrial symbiosis.

High temperature photoluminescence dependence and energy migration of Tb3+-Incorporated K3Y(BO2)6 phosphors.

This study investigates the structural and photoluminescence (PL) characteristics of Tb3+-incorporated K3Y(BO2)6 (KYBO) phosphors synthesized via a microwave-assisted sol-gel technique. X-ray diffraction (XRD) and Rietveld refinement confirmed the formation of a pure hexagonal phase, with lattice expansion due to Tb³âº doping. PL studies revealed strong green emissions centered at 541 nm, attributed to the 5D4 → 7F5 transitions of Tb³âº ions, with the highest intensity observed at 5 wt% Tb³âº. A decrease in emission was observed at higher concentrations due to concentration quenching. Temperature-dependent PL measurements revealed reverse thermal quenching enhancing PL intensity. Chromaticity analysis based on CIE 1931 coordinates showed stable green emission across all concentrations, with a maximum color purity of 89.74% observed for the KYBO:3 wt% Tb³âº sample. The results, along with reverse thermal quenching behavior observed between 470K and 550K, suggest that these phosphors exhibit excellent potential for lighting and display technologies.

Modeling sustainable photocatalytic degradation of acidic dyes using Jordanian nano-Kaolin-TiO2 and solar energy: Synergetic mechanistic insights.

The abstract highlights the global issue of environmental contamination caused by organic compounds and the exploration of various methods for its resolution. One such approach involves the utilization of titanium dioxide (TiO2) as a photocatalyst in conjunction with natural adsorption materials like kaolin. The study employed a modeling-based approach to investigate the sustainable photocatalytic degradation of acidic dyes using a Jordanian nano-kaolin-TiO2 composite material and solar energy. Mechanistic insights were gained through the identification of the dominant reactive oxygen species (ROS) involved in the degradation process, as well as the synergetic effect between adsorption and photocatalysis. The Jordanian nano-kaolin-TiO2 composite was synthesized using the sol-gel method and characterized. The nanocomposite photocatalyst exhibited particle sizes ranging from 27 to 41 nm, with the TiO2 nanoparticles well-dispersed within the kaolin matrix. The efficacy of this nanocomposite in removing Congo-red dye was investigated under various conditions, including pH, initial dye concentration, and photocatalyst amount. The optimal conditions for dye removal were found to be at pH 5, with an initial dye concentration of 20 ppm, and using 0.1 g of photocatalyst, resulting in a 95 % removal efficiency. The mechanistic insights gained from this study indicate that the hydroxyl radicals (•OH) generated during the photocatalytic process play a dominant role in the degradation of the acidic dye. Furthermore, the synergetic effect between the adsorption of the dye molecules onto the photocatalyst surface and the subsequent photocatalytic degradation by the ROS was found to enhance the overall removal efficiency. These findings contribute to the fundamental understanding of the photodegradation mechanisms and guide the development of more efficient photocatalytic systems for the treatment of acidic dye-containing wastewater. The use of solar power during the purification procedure also leads to cost reduction and strengthens sustainability efforts.

Cotton wool-like ion-doped bioactive glass nanofibers: investigation of Zn and Cu combined effect.

Electrospinning is a versatile and straightforward technique to produce nanofibrous mats with different morphologies. In addition, by optimizing the solution, processing, and environmental parameters, three-dimensional (3D) nanofibrous scaffolds can also be created using this method. In this work, the preparation and characterization of bioactive glass (BG) scaffolds based on the SiO2-CaO sol-gel system, a biomaterial with a highly reactive surface, is reported. The electrospinning technique was combined with sol-gel methods to obtain nanofibrous 3D cotton wool-like scaffolds. The addition of zinc and copper ions to the silica-calcia system was examined, and the influence of these ions on the material properties and characteristics was investigated by various characterization techniques, from morphological and chemical properties to antibacterial and wound closure capability, cell viability and ion release. Our findings show that the cotton wool-like ion-doped nanofibers are promising for wound healing applications.

Chiral Nanostructured Glycerohydrogel Sol-Gel Plates of Chitosan L- and D-Aspartate: Supramolecular Ordering and Optical Properties.

A comprehensive study was performed on the supramolecular ordering and optical properties of thin nanostructured glycerohydrogel sol-gel plates based on chitosan L- and D-aspartate and their individual components in the X-ray, UV, visible, and IR ranges. Our comparative analysis of chiroptical characteristics, optical collimated transmittance, the average cosine of the scattering angle, microrelief and surface asymmetry, and the level of structuring shows a significant influence of the wavelength range of electromagnetic radiation and the enantiomeric form of aspartic acid on the functional characteristics of the sol-gel materials. At the macrolevel of the supramolecular organization, a complex topography of the surface layer and a dense amorphous-crystalline ordering of polymeric substances were revealed, while at the nanolevel, there were two forms of voluminous scattering domains: nanospheres with diameters of 60-120 nm (L-) and 45-55 nm (D-), anisometric particles of lengths within ~100-160 (L-) and ~85-125 nm (D-), and widths within ~10-20 (L-) and ~20-30 nm (D-). The effect of optical clearing on glass coated with a thin layer of chitosan L-(D-)aspartate in the near-UV region was discovered (observed for the first time for chitosan-based materials). The resulting nanocomposite shape-stable glycerohydrogels seem promising for sensorics and photonics.

Improving the Catalytic Performance of BaMn0.7Cu0.3O3 Perovskite for CO Oxidation in Simulated Cars Exhaust Conditions by Partial Substitution of Ba.

The sol-gel method, adapted to aqueous media, was used for the synthesis of BaMn0.7Cu0.3O3 (BMC) and Ba0.9A0.1Mn0.7Cu0.3O3 (BMC-A, A = Ce, La or Mg) perovskite-type mixed oxides. These samples were fully characterized by ICP-OES, XRD, XPS, H2-TPR, BET, and O2-TPD and, subsequently, they were evaluated as catalysts for CO oxidation under different conditions simulating that found in cars exhaust. The characterization results show that after the partial replacement of Ba by A metal in BMC perovskite: (i) a fraction of the polytype structure was converted to the hexagonal BaMnO3 perovskite structure, (ii) A metal used as dopant was incorporated into the lattice of the perovskite, (iii) oxygen vacancies existed on the surface of samples, and iv) Mn(IV) and Mn(III) coexisted on the surface and in the bulk, with Mn(IV) being the main oxidation state on the surface. In the three reactant atmospheres used, all samples catalysed the CO to CO2 oxidation reaction, showing better performances after the addition of A metal and for reactant mixtures with low CO/O2 ratios. BMC-Ce was the most active catalyst because it combined the highest reducibility and oxygen mobility, the presence of copper and of oxygen vacancies on the surface, the contribution of the Ce(IV)/Ce(III) redox pair, and a high proportion of surface and bulk Mn(IV). At 200 °C and in the 0.1% CO + 10% O2 reactant gas mixture, the CO conversion using BMC-Ce was very similar to the achieved with a 1% Pt/Al2O3 (Pt-Al) reference catalyst.

Process Optimization and Equilibrium, Thermodynamic, and Kinetic Modeling of Toxic Congo Red Dye Adsorption from Aqueous Solutions Using a Copper Ferrite Nanocomposite Adsorbent.

In the present investigation of copper ferrite, a CuFe2O4 nanocomposite adsorbent was synthesized using the sol-gel method, and its relevance in the adsorptive elimination of the toxic Congo red (CR) aqueous phase was examined. A variety of structural methods were used to analyze the CuFe2O4 nanocomposite; the as-synthesized nanocomposite had agglomerated clusters with a porous, irregular, rough surface that could be seen using FE-SEM, and it also contained carbon (23.47%), oxygen (44.31%), copper (10.21%), and iron (22.01%) in its elemental composition by weight. Experiments were designed to achieve the most optimized system through the utilization of a central composite design (CCD). The highest uptake of CR dye at equilibrium occurred when the initial pH value was 5.5, the adsorbate concentration was 125 mg/L, and the adsorbent dosage was 3.5 g/L. Kinetic studies were conducted, and they showed that the adsorption process followed a pseudo-second-order (PSO) model (regression coefficient, R2 = 0.9998), suggesting a chemisorption mechanism, and the overall reaction rate was governed by both the film and pore diffusion of adsorbate molecules. The process through which dye molecules were taken up onto the particle surface revealed interactions involving electrostatic forces, hydrogen bonding, and pore filling. According to isotherm studies, the equilibrium data exhibited strong agreement with the Langmuir model (R2 = 0.9989), demonstrating a maximum monolayer adsorption capacity (qmax) of 64.72 mg/g at pH 6 and 302 K. Considering the obtained negative ΔG and positive ΔHads and ΔSads values across all tested temperatures in the thermodynamic investigations, it was confirmed that the adsorption process was characterized as endothermic, spontaneous, and feasible, with an increased level of randomness. The CuFe2O4 adsorbent developed in this study is anticipated to find extensive application in effluent treatment, owing to its excellent reusability and remarkable capability to effectively remove CR in comparison to other adsorbents.

Green Synthesis of Er-Doped ZnO Nanoparticles: An Investigation on the Methylene Blue, Eosin, and Ibuprofen Removal by Photodegradation.

We present a study on the green synthesis of undoped and Er-doped ZnO compounds using Mangifera indica gum (MI). A set of tests were conducted to assess the structure of the material. The tests included X-ray diffraction, Raman, and Fourier-transform infrared spectroscopy. Optical properties were studied using diffuse reflectance and photoluminescence. Morphological and textural investigations were done using SEM images and N2 adsorption/desorption. Furthermore, photocatalytic tests were performed with methylene blue (MB), yellow eosin (EY), and the pharmaceutical drug ibuprofen (IBU) under UV irradiation. The study demonstrated that replacing the stabilizing agent with Mangifera indica gum is an effective method for obtaining ZnO nanoparticles. Additionally, the energy gap of the nanoparticles exhibits a slight reduction in value. Photoluminescence studies showed the presence of zinc vacancies and other defects in both samples. In the photocatalytic test, the sample containing Er3+ exhibited a degradation of 99.7% for methylene blue, 81.2% for yellow eosin, and 52.3% for ibuprofen over 120 min. In the presence of methyl alcohol, the degradation of MB and EY dyes is 16.7% and 55.7%, respectively. This suggests that hydroxyl radicals are responsible for the direct degradation of both dyes. In addition, after the second reuse, the degradation rate for MB was 94.08%, and for EY, it was 82.35%. For the third reuse, the degradation rate for MB was 97.15%, and for EY, it was 17%. These results indicate the significant potential of the new semiconductor in environmental remediation applications from an ecological synthesis.

Elucidating Phase Transformation and Surface Amorphization of Li7 La3 Zr2 O12 by In Situ Heating TEM.

Garnet-type Li7 La3 Zr2 O12 (LLZO) solid-state electrolytes hold great promise for the next-generation all-solid-state batteries. An in-depth understanding of the phase transformation during synthetic processes is required for better control of the crystallinity and improvement of the ionic conductivity of LLZO. Herein, the phase transformation pathways and the associated surface amorphization are comparatively investigated during the sol-gel and solid-state syntheses of LLZO using in situ heating transmission electron microscopy (TEM). The combined ex situ X-ray diffraction and in situ TEM techniques are used to reveal two distinct phase transformation pathways (precursors â†’ La2 Zr2 O7  â†’ LLZO and precursors â†’ LLZO) and the subsequent layer-by-layer crystal growth of LLZO on the atomic scale. It is also demonstrated that the surface amorphization surrounding the LLZO crystals is sensitive to the postsynthesis cooling rate and significantly affects the ionic conductivity of pelletized LLZO. This work brings up a critical but often overlooked issue that may greatly exacerbate the Li-ion conductivity by undesired synthetic conditions, which can be leveraged to ameliorate the overall crystallinity to improve the electrochemical performance of LLZO. These findings also shed light on the significance of optimizing surface structure to ensure superior performance of Li-ion conductors.

Novel NASICON-Type Na-V-Mn-Ni-Containing Cathodes for High-Rate and Long-Life SIBs.

Partial substitution of V by other transition metals in Na3 V2 (PO4 )3 (NVP) can improve the electrochemical performance of NVP as a cathode for sodium-ion batteries (SIBs). Herein, phosphate Na-V-Mn-Ni-containing composites based on NASICON (Natrium Super Ionic Conductor)-type structure have been fabricated by sol-gel method. The synchrotron-based X-ray study, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) studies show that manganese/nickel combinations successfully substitute the vanadium in its site within certain limits. Among the received samples, composite based on Na3.83 V1.17 Mn0.58 Ni0.25 (PO4 )3 (VMN-0.5, 108.1 mAh g-1 at 0.2 C) shows the highest electrochemical ability. The cyclic voltammetry, galvanostatic intermittent titration technique, in situ XRD, ex situ XPS, and bond valence site energy calculations exhibit the kinetic properties and the sodium storage mechanism of VMN-0.5. Moreover, VMN-0.5 electrode also exhibits excellent electrochemical performance in quasi-solid-state sodium metal batteries with PVDF-HFP quasi-solid electrolyte membranes. The presented work analyzes the advantages of VMN-0.5 and the nature of the substituted metal in relation to the electrochemical properties of the NASICON-type structure, which will facilitate further commercialization of SIBs.

Synthesis of a Stable and High-Concentration BaHfxTi1-xO3 Sol-Gel for High Electromechanical Performance of Bulk Ceramics.

Lead-based materials are widely used in piezoceramics due to their high electromechanical properties. However, due to environmental protection and sustainable development, the use of the toxic element lead (Pb) in electronic devices is strictly restricted, therefore requiring the rapid development of piezoelectric-based devices with lead-free ceramics. In this context, a lead-free doped barium titanate was studied with a dual objective. First, a new sol-gel method to synthesize Hf4+-doped BaHfxTi1-xO (BHT) with x = 0.05, 0.075, and 0.10 is presented. Such BHT sols were prepared at high concentrations of up to 1 M. Dilution in ethylene glycol allowed parameters (viscosity, colloid sizes, etc.) to be controlled, which ensured a time-stable sol for several months at room temperature. Second, densified bulk ceramics with attrited powders were obtained from these sols and showed very good electromechanical properties, with a thickness coupling factor of kt = 47% (BaHf0.05Ti0.95O3 sintered at 1500 °C/6 h). These results are a first step that will allow the processing of lead-free piezoelectric thick films using a sol-gel composite method for vibrational energy harvesting applications.

Enhancing Photocatalytic Properties of TiO2 Photocatalyst and Heterojunctions: A Comprehensive Review of the Impact of Biphasic Systems in Aerogels and Xerogels Synthesis, Methods, and Mechanisms for Environmental Applications.

This review provides a detailed exploration of titanium dioxide (TiO2) photocatalysts, emphasizing structural phases, heterophase junctions, and their impact on efficiency. Key points include diverse synthesis methods, with a focus on the sol-gel route and variants like low-temperature hydrothermal synthesis (LTHT). The review delves into the influence of acid-base donors on gelation, dissects crucial drying techniques for TiO2 aerogel or xerogel catalysts, and meticulously examines mechanisms underlying photocatalytic activity. It highlights the role of physicochemical properties in charge diffusion, carrier recombination, and the impact of scavengers in photo-oxidation/reduction. Additionally, TiO2 doping techniques and heterostructures and their potential for enhancing efficiency are briefly discussed, all within the context of environmental applications.

Resorcinol-Formaldehyde-Derived Carbon Xerogels: Preparation, Functionalization, and Application Aspects.

Carbon xerogels (CXs) are materials obtained via the pyrolysis of resins prepared via the sol-gel polycondensation of resorcinol and formaldehyde. These materials attract great attention as adsorbents, catalyst supports, and energy storage materials. One of the most interesting features of CXs is the possibility of fine-tuning their structures and textures by changing the synthesis conditions in the sol-gel stage. Thus, the first part of this review is devoted to the processes taking place in the polycondensation stage of organic precursors. The formation of hydroxymethyl derivatives of resorcinol and their polycondensation take place at this stage. Both of these processes are catalyzed by acids or bases. It is revealed that the sol-gel synthesis conditions, such as pH, the formaldehyde/resorcinol ratio, concentration, and the type of basic modifier, all affect the texture of the materials being prepared. The variation in these parameters allows one to obtain CXs with pore sizes ranging from 2-3 nm to 100-200 nm. The possibility of using other precursors for the preparation of organic aerogels is examined as well. For instance, if phenol is used instead of resorcinol, the capabilities of the sol-gel method become rather limited. At the same time, other phenolic compounds can be applied with great efficiency. The methods of gel drying and the pyrolysis conditions are also reviewed. Another important aspect analyzed within this review is the surface modification of CXs by introducing various functional groups and heteroatoms. It is shown that compounds containing nitrogen, sulfur, boron, or phosphorus can be introduced at the polycondensation stage to incorporate these elements into the gel structure. Thus, the highest surface amount of nitrogen (6-11 at%) was achieved in the case of the polycondensation of formaldehyde with melamine and hydroxyaniline. Finally, the methods of preparing metal-doped CXs are overviewed. Special attention is paid to the introduction of a metal precursor in the gelation step. The elements of the iron subgroup (Fe, Ni, Co) were found to catalyze carbon graphitization. Therefore, their introduction can be useful for enhancing the electrochemical properties of CXs. However, since the metal surface is often covered by carbon, such materials are poorly applicable to conventional catalytic processes. In summary, the applications of CXs and metal-doped CXs are briefly mentioned. Among the promising application areas, Li-ion batteries, supercapacitors, fuel cells, and adsorbents are of special interest.

Influence of Ag and/or Sr Dopants on the Mechanical Properties and In Vitro Degradation of ß-Tricalcium Phosphate-Based Ceramics.

ß-tricalcium phosphate has good biodegradability and biocompatibility; it is widely perceived as a good material for treating bone deficiency. In this research, different contents of strontium (Sr) and silver (Ag) ion-doped ß-tricalcium phosphate powders were prepared using the sol-gel method. After obtaining the best ratio of pore-forming agent and binder, the as-synthesized powders were sintered in a muffle for 5 h at 1000 °C to obtain the samples. Then, these samples were degraded in vitro in simulated body fluids. The samples were tested using a series of characterization methods before and after degradation. Results showed that the amount of Sr and/or Ag doping had an effect on the crystallinity and structural parameters of the samples. After degradation, though the compressive strength of these samples decreased overall, the compressive strength of the undoped samples was higher than that of the doped samples. Notably, apatite-like materials were observed on the surface of the samples. All the results indicate that Sr and/or Ag ß-TCP has good osteogenesis and proper mechanical properties; it will be applied as a prospective biomaterial in the area of bone repair.

A SEM-EDX Study on the Structure of Phenyl Phosphinic Hybrids Containing Boron and Zirconium.

The SEM-EDX method was used to investigate the structure and morphology of organic-inorganic hybrids containing zirconium, boron and phosphorus compounds, synthesized by the sol-gel method. We started by using, for the first time together, zirconyl chloride hexa-hydrate (ZrOCl2·6H2O), phenyl phosphinic acid and triethyl borate as precursors and reagents, at different molar ratios. The obtained hybrids showed a very high thermal stability and are not soluble in water or in organic solvents. As a consequence, such hybrid solid materials are suitable for applications at high temperatures. The obtained hybrids have complex 3D structures and form organic-inorganic networks containing Zr-O-Zr, Zr-O-P and Zr-O-B bridges. Such organic-inorganic networks are also expected to form supramolecular structures and to have many potential applications in different fields of great interest such as catalysis, medicine, agriculture, energy storage, fuel cells, sensors, electrochemical devices and supramolecular chemistry.

One-Pot Sol-Gel Synthesis of Highly Insulative Hybrid P(AAm-CO-AAc)-Silica Aerogels with Improved Mechanical and Thermal Properties.

Silica aerogels and their derivatives have outstanding thermal properties with exceptional values in the thermal insulation industry. However, their brittle nature restricts their large-scale commercialization. Thus, enhancing their mechanical strength without affecting their thermal insulating properties is essential. Therefore, for the first time, highly thermally stable poly(acrylamide-co-acrylic acid) partial sodium salt is used as a reinforcing polymer to synthesize hybrid P(AAm-CO-AAc)-silica aerogels via epoxy ring-opening polymerization in the present study. Functional groups in P(AAm-CO-AAc) partial sodium salts, such as CONH2 and COOH, acted as nucleophiles for the epoxy ring-opening reaction with (3-glycidyloxypropyl)trimethoxysilane, which resulted in a seven-fold enhancement in mechanical strength compared to that of pristine silica aerogel while maintaining thermal conductivity at less than 30.6 mW/mK and porosity of more than 93.68%. Moreover, the hybrid P(AAm-CO-AAc)-silica aerogel demonstrated improved thermal stability up to 343 °C, owing to the synergetic effect between the P(AAm-CO-AAc) and the silica aerogel, corresponding to the thermal stability and strong covalent bonding among them. These excellent results illustrate that this new synthetic approach for producing hybrid P(AAm-CO-AAc)-silica aerogels is useful for enhancing the mechanical strength of pristine silica aerogel without impairing its thermal insulating property and shows potential as an industrial heat insulation material.

The Upconversion Luminescence of Ca3Sc2Si3O12:Yb3+,Er3+ and Its Application in Thermometry.

To develop novel luminescent materials for optical temperature measurement, a series of Yb3+- and Er3+-doped Ca3Sc2Si3O12 (CSS) upconversion (UC) phosphors were synthesized by the sol-gel combustion method. The crystal structure, phase purity, and element distribution of the samples were characterized by powder X-ray diffraction and a transmission electron microscope (TEM). The detailed study of the photoluminescence emission spectra of the samples shows that the addition of Yb3+ can greatly enhance the emission of Er3+ by effective energy transfer. The prepared Yb3+ and Er3+ co-doped CSS phosphors exhibit green emission bands near 522 and 555 nm and red emission bands near 658 nm, which correspond to the 2H11/2→4I15/2, 4S3/2→4I15/2, and 4F9/2→4I15/2 transitions of Er3+, respectively. The temperature-dependent behavior of the CSS:0.2Yb3+,0.02Er3+ sample was carefully studied by the fluorescence intensity ratio (FIR) technique. The results indicate the excellent sensitivity of the sample, with a maximum absolute sensitivity of 0.67% K-1 at 500 K and a relative sensitivity of 1.34% K-1 at 300 K. We demonstrate here that the temperature measurement performance of FIR technology using the CSS:Yb3+,Er3+ phosphor is not inferior to that of infrared thermal imaging thermometers. Therefore, CSS:Yb3+,Er3+ phosphors have great potential applications in the field of optical thermometry.

Novel Sol-Gel Synthesis of TiO2 Spherical Porous Nanoparticles Assemblies with Photocatalytic Activity.

For this study, the synthesis of TiO2 nanomaterials was performed via a novel sol-gel method employing titanium butoxide as a metal precursor, Pluronic F127 as a templating agent, toluene as a swelling agent, and acidic water or ethanol as the reaction solvents. The method was designed by tailoring certain reaction parameters, such as the sequence of toluene addition, magnetic stirring, the type of reaction solvent, and the calcination conditions. Analysis of the specific surface area and porosity was carried out via N2 physisorption, whereas the morphological features of the solids were investigated via transmission electron microscopy. The crystalline structure of both the dried powders and the calcined materials was evaluated using X-ray diffraction analysis. It transpired that the different phase compositions of the solids are related to the specific synthesis medium employed. Under the adopted reaction conditions, ethanol, which was used as a reaction solvent, promoted the local arrangement of dispersed anatase particles, the specific arrangement of which does not lead to rutile transformation. Conversely, the use of water alone supported high-particle packing, evolving into a rutile phase. The photodegradation of Rhodamine B was used as a target reaction for testing the photocatalytic activity of the selected samples.

Sol-Gel Synthesis of Translucent and Persistent Luminescent SiO2@ SrAl2O4 Eu, Dy, B Materials.

This publication offers an economically promising method of persistent luminescent silicate glass synthesis that does not involve high temperatures or ready-made (separately synthesized) PeL particles. In this study, we demonstrate the formation of SrAl2O4 doped with Eu, Dy, and B in a SiO2 glass structure using the one-pot low-temperature sol-gel synthesis method. By varying the synthesis conditions, we can use water-soluble precursors (e.g., nitrates) and a dilute aqueous solution of rare-earth (RE) nitrates as starting materials for SrAl2O4 synthesis, which can be formed during the sol-gel process at relatively low sintering temperatures (600 °C). As a result, translucent, persistently luminescent glass is obtained. The glass shows the typical Eu2+ luminescence and the characteristic afterglow. The afterglow duration is about 20 s. It is concluded that the slow drying procedure (2 weeks) is optimal for these samples to sufficiently get rid of the excess water (mainlyOH groups) and solvent molecules that can influence the strontium aluminate luminescence properties and have a pernicious effect on the afterglow. It can also be concluded that boron is playing a crucial role in the formation of trapping centers needed for PeL processes in the PeL silicate glass.

Unraveling the Mechanism and Practical Implications of the Sol-Gel Synthesis of Spinel LiMn2O4 as a Cathode Material for Li-Ion Batteries: Critical Effects of Cation Distribution at the Matrix Level.

Spinel LiMn2O4 (LMO) is a state-of-the-art cathode material for Li-ion batteries. However, the operating voltage and battery life of spinel LMO needs to be improved for application in various modern technologies. Modifying the composition of the spinel LMO material alters its electronic structure, thereby increasing its operating voltage. Additionally, modifying the microstructure of the spinel LMO by controlling the size and distribution of the particles can improve its electrochemical properties. In this study, we elucidate the sol-gel synthesis mechanisms of two common types of sol-gels (modified and unmodified metal complexes)-chelate gel and organic polymeric gel-and investigate their structural and morphological properties and electrochemical performances. This study highlights that uniform distribution of cations during sol-gel formation is important for the growth of LMO crystals. Furthermore, a homogeneous multicomponent sol-gel, necessary to ensure that no conflicting morphologies and structures would degrade the electrochemical performances, can be obtained when the sol-gel has a polymer-like structure and uniformly bound ions; this can be achieved by using additional multifunctional reagents, namely cross-linkers.