Evaluation of the efficacy and quality of life in patients with temporomandibular joint disorders treated with Kovacs digital occlusal splint: a pilot study.

BACKGROUND: Few studies have been conducted on treating temporomandibular disorders (TMDs) with new digital occlusal splints, which has increasingly attracted wide attention. METHODS: To evaluate the clinical efficacy and quality of life (QoL) of Kovacs digital occlusal splint (KDOS) treatment in patients with TMD. MATERIALS AND METHODS: Eighty-nine patients with TMD who were treated using KDOS were analyzed. The patients were divided into three groups according to the Wilkes stage. The clinical symptoms and QoL scores of the patients in each group were recorded before and at least three months after treatment, and the data were statistically analyzed and compared. The relationships between the disease severity, sex, age, and level of QoL before treatment and improvement in the clinical symptoms were analyzed using binary logistic regression. RESULTS: The mean age and follow-up period of the patients were 28.0 ± 10.4 years and 4.9 ± 2.1 months, respectively. After KDOS treatment, the improvement rates of joint noise and pain were 80.4% and 69.8%, respectively. Additionally, the patients' maximum mouth opening and global QoL mean scores significantly improved compared to those before treatment (p < 0.001). Binary logistic regression analysis revealed that the factors affecting the improvement in the clinical symptoms were disease severity and level of QoL before treatment. CONCLUSIONS: KDOS can improve the clinical symptoms and QoL of patients with TMD. Moreover, patients without osteoarthritis and with low pretreatment QoL levels are more likely to demonstrate clinical improvement. TRIAL REGISTRATION: The trial was registered with Chinese Clinical Trial Registry (ChiCTR) (ID: ChiCTR2300076518) on 11/10/2023.

Oral Health Assessment in Cleft Lip & Palate Patients During Orthodontic Treatment for Maxillary Protraction: A Periodontal & Microbiological Study.

OBJECTIVE: To assess the oral health status and microbiota of subgingival plaque in patients with surgically repaired cleft lip and palate (CLP) during orthodontic treatment for maxillary protraction with two different orthodontic appliances. DESIGN: Randomized controlled trial. SETTING: Institutional. PARTICIPANTS: A total of 90 patients with surgically repaired Unilateral Cleft Lip and Palate, out of initially enrolled 120 patients, were divided into 3 groups: experimental group I, experimental group II and control group, with 30 subjects each. Patients with a history of oral prophylaxis in last 6 months or antibiotic therapy within 3 months were excluded from the study. INTERVENTIONS: Bone Anchored Maxillary Protraction was done in experimental group I, while facemask with acrylic occlusal splint was used for maxillary protraction in experimental group II and no orthodontic intervention in control group. MEAN OUTCOME MEASURES: Plaque Index (PI), Gingival Index (GI), Gingival Bleeding Index (GBI), Probing Depth (PD), and microbiota of subgingival plaque (P. gingivalis, P. intermedia, Veillonella and Capnocytophaga) were compared at baseline (T0) and after 8 months (T1). RESULTS: The PI, GI, GBI and PD were observed to be significantly higher in experimental group II followed by experimental group I as compared to control group at 8 months interval (P < .001). The microbiota counts increased significantly in experimental group II and experimental group I (P < .001), as compared to control group. CONCLUSION: Maxillary protraction with facemask and bone plates was found to be a better alternative than facemask with occlusal splint, considering the overall oral health of patients with CLP.

Lifespan of Splints in a Sample of German Soldiers Hospitalised with Post-traumatic Stress Disorder (PTSD) in Combination with Sleep Bruxism and Painful Temporomandibular Disorder (TMD).

PURPOSE: This cross-sectional longitudinal observational study aimed to clarify the question of whether painful temporomandibular disorders (TMD) in psychiatrically confirmed patients hospitalised for post-traumatic stress disorder (PTSD) therapy after using splint therapy (ST) show long-term therapeutic effects in the case of functional disorders. MATERIALS AND METHODS: One hundred fifty-three (153) inpatients (123 male and 20 female soldiers, age 35.8 ± 9.2 years, 26.6 ± 2.2 teeth) with confirmed PTSD (Impact of Event Scale - Revised ≥33), grade 3 to 4 chronic pain according to von Korff's Chronic Pain Scale and the research diagnostic criteria of painful TMD (RDC-TMD) were recorded. All participants received a maxillary occlusal splint that was worn at night. Control check-ups of the therapeutic effect of the splint were conducted for up to 9 years during psychiatric follow-ups. RESULTS: TMD pain worsened in 22 (14.4%) patients within the first 6 weeks and led to the removal of the splint. The pain intensity (PI) at BL was reported to be a mean of VAS 7.7 ± 1.1. Six weeks after ST (n = 131), the average PI was recorded as VAS 2.6 ± 1.3. Based on the last examination date of all subjects, the average PI was recorded as 0.7 ± 0.9. Seventy-two (72) patients used a second stabilisation splint in the maxilla after 14.4 ± 15.7 months, and 38 patients used between 3 and 8 splints during their psychiatric and dental treatment time (33.7 ± 29.8 months). CONCLUSION: The presented data shows that therapeutic pain reduction remained valid in the long term despite continued PTSD. The lifespan of a splint seems to be dependent on individual factors. Long-term splint therapy appears to be accepted by the majority of patients with PTSD and painful TMD.

Evaluation of intra-articular injection of injectable platelet-rich fibrin, anterior repositioning splint and arthrocentesis in treatment of temporomandibular joint internal derangement.

The current research paper was designed to assess the impact of an intra-articular injection of injectable platelet-rich fibrin (I-PRF) following arthrocentesis and the use of an anterior repositioning splint (ARS) as a proposed treatment approach for addressing symptomatic internal derangement of the temporomandibular joint (TMJ). This study comprised thirty patients who presented with bilateral disc displacement without reduction. The patients were evenly distributed into two groups: Group I underwent treatment involving ARS and arthrocentesis alone, while Group II underwent treatment with ARS, arthrocentesis, and the injection of I-PRF. Clinical assessment of all patients was done postoperatively in the following intervals; first week, first month, third month, and six months for maximum mouth opening (MMO), right and left lateral excursion, and pain score. Magnetic resonance imaging (MRI) assessment for all joints was done at the sixth month postoperatively. Both groups demonstrated improvement in MMO, lateral excursion, and pain. Significant statistical differences were observed in the mean values of MMO and Visual Analogue Scale (VAS), favouring the I-PRF group. MRI postoperatively showed no significant changes in disk position or morphology at the end of the sixth month. Administering an intra-articular I-PRF injection subsequent to arthrocentesis demonstrates effectiveness as a treatment approach for alleviating the signs and symptoms associated with internal derangement of the TMJ.

Clinical outcomes of patients with unilateral internal derangement of the temporomandibular joint following arthrocentesis and stabilization splint therapy.

BACKGROUND: The management of internal derangement (ID) of the TMJ is challenging because of multiple etiologic factors and varying degrees of severity. The aim of this study was to evaluate the clinical outcomes of patients with unilateral ID treated with arthrocentesis and stabilization splint therapy during a 6-month period. METHODS: A total of 105 patients (87 females, 18 males) with unilateral ID were included in this study. Patients were divided into unilateral anterior disc displacement with reduction (ADDwR) and unilateral anterior disc displacement without reduction (ADDwoR). Patients with ADDwoR were subdivided according to the erosive bone changes. Objective parameters on mandibular movement and subjective parameters on pain were obtained and assessed. Their clinical outcomes before and after arthrocentesis and stabilization splint therapy were compared with the chi-square, Fisher's exact test, paired t-test, or Wilcoxon singed-rank test. RESULTS: All objective parameters of unilateral ID patients significantly increased at the 6-month follow-up. The differences in mean visual analog scale (VAS) pain scores were statistically significant in all subjective variables (p < 0.01). In joints with ADDwoR, preoperative maximal mouth opening, and maximal protrusive movement in both groups, with erosive and non-erosive changes were significantly increased after 6 months (p < 0.01). However, right and left maximal lateral movement increased after treatment in both groups but without significant differences. All VAS pain scores on jaw movement and palpation of associated muscles showed a significant decrease regardless of erosive changes. CONCLUSIONS: The combination of arthrocentesis and subsequent stabilization splint therapy was shown to be highly effective in pain reduction and improvement of mandibular movements in both unilateral ADDwR and ADDwoR, as well as in cases with both erosive and non-erosive bony changes associated with unilateral ADDwoR.

The role of nutraceuticals in the management of temporomandibular disorders.

OBJECTIVES: Temporomandibular disorders (TMDs) are usually treated with occlusal appliances and supportive treatments such as physical therapy and drugs. Supplements can be included among potential supportive therapies, with the aim of reducing the use of drugs. To evaluate the efficacy of nutraceuticals' short-term treatment in subjects with temporomandibular disorders. METHODS: The study started in January 2021 and ended in January 2022. Subjects with temporomandibular disorders and a verbal numeric scale >40 were recruited and randomly assigned to one of the following groups. If waiting to start a therapy, to the nutraceutical group or to the no treatment group, while if already undergoing splint therapy, to nutraceautical+splint group or to splint therapy group. Nutraceutical used was composed by Boswellia Serrata Casperome, Magnesium, Tryptophan and vitamins B2 and D with a posology of one tablet/day before sleep for 40 days. Presence of temporomandibular pain, headache, neck pain and sleep/emotional disorders were assessed at T0 and at T1, after 40 days. ANOVA was performed to compare treatments with nutraceuticals and their respective controls, as for the variables related to painful symptomatology. Chi- Squared was conducted to assess differences in sleep/emotional disorders between groups. The statistical significance was p<0.05. RESULTS: The groups using nutraceuticals showed statistically significant improvements over controls for most of the variables analyzed. CONCLUSIONS: The use of nutraceutical seems to be a valuable support for TMD therapy in the short term either alone or combined with occlusal splint therapy.

Does curve of Spee affect the precision of 3D-printed curvature-adaptive splints?

OBJECTIVES: This study aimed to propose a standardized protocol for the fabrication of three-dimensionally (3D)-printed curvature-adaptive splints (CASs) and assess the precision of CASs on dentitions with different depths of the curve of Spee (COS). METHODS: 76 lower dental resin models, each exhibiting one of the four types of COS (0-, 2-, 4-, and 6-mm deep), were selected and digitally scanned. CASs were designed, 3D printed, and grouped into C0, C2, C4, and C6, corresponding to the four types of COS depths. To assess precision, the CASs occluded with the resin model were scanned as a whole and compared with the originally designed ones. RESULTS: In terms of translational deviations observed in the CASs, the mean value of absolute sagittal deviation (0.136 mm) was significantly higher than those of vertical (0.091 mm) and transversal deviations (0.045 mm) (P < 0.01). Regarding rotational deviations of the CASs, the mean deviation in pitch (0.323°) was significantly higher than those in yaw (0.083°) and roll (0.110°) (P < 0.01). However, when comparing the accuracy of CASs across C0, C2, C4, and C6 groups, no statistically significant difference was found. Additionally, the translational deviations, rotational deviations, and RMSE of all groups were significantly lower than the clinically acceptable limits of 0.5 mm, 1°, and 0.25 mm, respectively (P < 0.01). CONCLUSIONS: The depth of the COS has no significant impact on the precision of CASs, as evidenced by the absence of statistically significant differences in translational, rotational deviations, and RMSE among all groups (C0, C2, C4, and C6). Moreover, despite relatively high deviations in the sagittal dimension and pitch, all dimensional deviations and RMSE remained statistically significantly lower than the corresponding clinically acceptable limits (CALs) in all groups. CLINICAL SIGNIFICANCE: This standardized protocol incorporating "curvature-adaptation" represents an optimized approach to fabricating diverse 3D-printed splints tailored to dentitions with different anatomical features in contemporary digital dentistry.

Evaluating the Impact of Various Treatment Modalities on the Chewing Efficiency of Anterior Disc Displacements of Temporomandibular Joint Disorder Cases: A Comparative Study.

Aim: Internal disc displacement of the temporomandibular joint (TMJ) is identified by an anomaly between the condylar-disc assembly, which, in many cases, may lead to discomfort and malfunction of the chewing function. The study's objective was to assess the effects of four distinct treatment approaches on temporomandibular disorder cases with anterior disc displacements focusing on their chewing efficiency. Materials and Methods: One hundred participants suffering from reducible TMJ disc displacement were selected for enrollment in the study. Subjects were divided equally into four groups: group I patients were treated with behavioral therapy; group II patients were treated with low-level laser therapy (LLLT); group III patients were treated with anterior repositioning splints; and group IV patients were treated with flat plane splints. Chewing efficiency was assessed utilizing the fractional sieving method and a synthetic food substitute was created using silicon impression material. The statistical analysis encompassed comparisons of chewing efficiency between groups and between baseline and posttreatment within each group, employing analysis of variance (ANOVA) and paired t tests, respectively. Results: Using the paired t test, a significant difference in chewing efficiency values as expressed by the median particle size was observed between the baseline and 6-month values in all groups (P < 0.05), except for group I where no significant change was noted over the 6 months (P > 0.05). The one-way ANOVA test revealed a statistically significant difference among groups following therapies (P ˂ 0.05). The post hoc Tukey test was employed for pairwise comparisons and revealed statistically significant variances in the main values of chewing efficiency among all groups at a 95% confidence level (P ˂ 0.05). Conclusion: The study's results suggest that occlusal splints and LLLT are more effective in improving chewing efficiency than behavioral interventions.

A Systematic Review of Conservatively Managed Isolated Extra-Articular Proximal Phalanx Finger Fractures in Adults.

Study design: Systematic review. Background: Proximal phalangeal fractures of the hand are challenging to treat, and significantly impact hand function and quality of life if poorly managed. Purpose: A systematic review to determine the efficacy of conservatively managed extra-articular proximal phalanx fractures to optimise recovery and prevent the need for surgical intervention and its associated risks. Methods: A literature search that included variations of the phrases 'proximal phalanx', 'fracture' and 'conservative management' was performed on 17 December 2023 using seven electronic databases and trial registries. Article screening, data extraction and critical appraisal using the Structured Effectiveness Quality Evaluation scale was performed independently. Results: Seven studies that captured 389 fractures from 356 unique patients were included. Studies were of level II to IV evidence and included one comparative cohort study and six prospective case series. Interventions involved timely rehabilitation, a plaster or orthotic device, controlled metacarpophalangeal joint flexion and free mobilisation of the interphalangeal joints. A weighted mean total active motion score of 249° was achieved, with 99.5% (387/389) of fractures achieving union. Conclusions: This systematic review cautions against definitive recommendations on conservative techniques for managing proximal phalanx fractures due to limitations of the available literature. However, our findings tentatively supports non-operative approaches as an alternative to surgery.

The Effect of Build Angle and Artificial Aging on the Accuracy of SLA- and DLP-Printed Occlusal Devices.

The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in comparison to each other and to subtractively manufactured devices. A total of 192 occlusal devices were manufactured by one SLA-printing and two DLP-printing methods in 5 different build angles as well as milling. The specimens were scanned and superimposed to their initial CAD data and each other to obtain trueness and precision data values. A second series of scans were performed after the specimens underwent an artificial aging simulation by thermocycling. Again, trueness and precision were investigated, and pre- and post-aging values were compared. A statistically significant influence was found for all main effects: manufacturing method, build angle, and thermocycling, confirmed by two-way ANOVA. Regarding trueness, overall tendency indicated that subtractively manufactured splints were more accurate than the 3D-printed, with mean deviation values around ±0.15 mm, followed by the DLP1 group, with ±0.25 mm at 0 degree build angle. Within the additive manufacturing methods, DLP splints had significantly higher trueness for all build angles compared to SLA, which had the highest mean deviation values, with ±0.32 mm being the truest to the original CAD file. Regarding precision, subtractive manufacturing showed better accuracy than additive manufacturing. The artificial aging demonstrated a significant influence on the dimensional accuracy of only SLA-printed splints.

Relative Motion Extension Splint after Extensor Tendon Reconstruction.

Recently, the wide-awake local anesthesia no tourniquet (WALANT) technique and relative motion extension (RME) splint changed practice in extensor tendon reconstruction and therapy. We wanted to share our approach for zones 5 to 8 extensor tendon management following the up-to-date developments. The impacts of surgery under WALANT and early active motion therapy with RME splinting were explained frankly and shown in several videos throughout the article.

Effectiveness of Ultrasound Therapy, TheraBite Device, Masticatory Muscle Exercises, and Stabilization Splint for the Treatment of Masticatory Myofascial Pain: A Randomized Controlled Trial.

BACKGROUND: Myofascial pain syndrome (MPS) is a particular type of temporomandibular joint disorder. Research findings comparing various treatment approaches are scarce and controversial. Therefore, this study aimed to compare the effectiveness of ultrasound therapy, stabilization splint, TheraBite device, and masticatory muscle exercises in reducing pain intensity and improving mandibular mobility in patients with MPS. METHODS: It was a single-blind, randomized, parallel-group, active-controlled trial that took place between April 2023 and October 2023 at the Department of Fixed Prosthodontics, Damascus University. Patients older than 18 years old with myofascial pain accompanied by limited jaw opening and pain lasting for at least 6 months were included. Eighty patients were randomly assigned into four groups using online randomization software: ultrasound therapy, stabilization splint, TheraBite device, and masticatory muscle exercises. Only outcome assessors were masked to treatment allocation. The exercise regimen was the exercise program for patients with TMD. The following primary outcome measures were considered at the baseline (t0), at the first (t1), second (t2), and fourth (t3) week of treatment, and at the second (t4) and fifth (t5) month of follow-up: pain intensity using the visual analogue scale, maximum interincisal opening, right lateral movement, and left lateral movement measured in millimeters. RESULTS: The pain level changed from severe to mild at t3 in ultrasound therapy, stabilization splint, and TheraBite device groups. In the masticatory muscle exercises group, it changed to moderate, with a significant difference between ultrasound therapy (p = 0.012) and stabilization splint (p = 0.013) groups. In addition, the mandibular mobility continued to improve at the subsequent follow-up periods (t4 and t5). CONCLUSIONS: All therapies are equally effective after 5-month follow-up. However, ultrasound therapy and stabilization splints have the benefit of achieving rapid improvement. TRIAL REGISTRATION: ISRCTN20833186.

Mechanical and biological properties of polymer materials for oral appliances produced with additive 3D printing and subtractive CAD-CAM techniques compared to conventional methods: a systematic review and meta-analysis.

OBJECTIVES: The aim of this review was to analyze mechanical and biological properties of resin materials used with subtractive or additive techniques for oral appliances fabrication and compare them to those conventionally manufactured. MATERIALS AND METHODS: The protocol was registered online at Open Science Framework (OSF) registries ( https://osf.io/h5es3 ) and the study was based on the preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P). An electronic search was conducted on MEDLINE (via PubMed), Scopus, and Web of Science from 1 February 2022 to 1 May 2022. INCLUSION CRITERIA: in vitro and in vivo studies published in the last 10 years, with CAD-CAM or 3D printed resins for occlusal splints. Data considered homogenous were subjected to meta-analysis (95% confidence interval [CI]; α = 0.05) with Stata17 statistical software. Since all variables were continuous, the Hedge g measure was calculated. A fixed-effects model was used for I2 = 0%, while statistical analysis was conducted using a random-effects model with I2 > 0%. RESULTS: 13 studies were included after full-text reading. The mechanical properties most studied were wear, flexural strength, surface hardness and surface roughness, while only 1 study investigated biological properties, performing the XTT viability assay. For the meta-analysis, only surface roughness, volume loss, and flexural strength were selected. Considering surface roughness, the subtractive specimen had a lower average value compared to traditional ones (Hedge's g with 95% CI = -1.25[ -1.84, - 0.66]). No significant difference was detected in terms of volume loss (P > 0.05) between the groups (Hedge's g with 95% CI = -0.01 [-2.71, - 2.68]). While flexural strength was higher in the control group (Hedge's g with 95% CI = 2.32 [0.10-4.53]). CONCLUSION: 3D printed materials showed properties comparable to conventional resins, while milled splint materials have not shown better mechanical performance compared with conventional heat-cured acrylic resin. Polyetheretherketone (PEEK) have great potential and needs to be further investigated. Biological tests on oral cell populations are needed to confirm the long-term biocompatibility of these materials. CLINICAL RELEVANCE: The use of "mixed splints" combining different materials needs to be improved and evaluated in future research to take full advantage of different characteristics and properties.

Efficiency of Glucosamine in Treating Temporomandibular Joint Osteoarthritis: A Systematic Review.

BACKGROUND: Temporomandibular joint osteoarthritis (TMJ OA) is a chronic disease that is a consequence of undue occlusal forces and is characterized by irreversible damage to the articular surfaces. Symptomatic slow-acting so-called nutraceutical drugs have been proposed as a treatment for osteoarthritis in comparison to non-steroidal anti-inflammatory drugs (NSAIDs). Oral glucosamine and chondroitin, slow-acting drugs, have been found to reduce pain and in- crease mouth opening in patients with TMJ OA. However, there is limited scientific evidence to confirm their clinical effectiveness. AIM: This systematic review was conducted to bolster the evidence supporting the assessment of the efficacy of glucosamine in the context of temporomandibular joint osteoarthritis (TMJ OA). METHODOLOGY: This review identified four review articles from databases like Medline (via PubMed), Web of Science, Scopus, and EMBASE till September 2023 after screening at the title, abstract, and full-text level. They were assessed for risk of bias with the JBI risk of bias assess- ment tool. RESULT: This review with meta-analysis focused on pooled estimate mean differences, revealing non-significant but discernible effects of glucosamine on maximum mouth opening (SMD = 0.288, p = 0.15) and pain reduction (SMD = 0.217, p = 0.476) in TMJ-related disorders. CONCLUSION: Compared to control groups with ibuprofen and tramadol, glucosamine showed slightly more favourable outcomes. However, the variability in methodology and study characteristics warrants further longitudinal studies to confirm its efficacy.

Assessing Conservative Treatment Options for Odontogenic Keratocyst in a 12-Year-Old Patient, with 1-Year Follow-up.

The odontogenic keratocyst (OKC) is a frequently developing odontogenic cyst that accounts for 10%-14% of all jaw cysts. Due to the high recurrence rate, aggressive therapeutic techniques such as jaw resection and marsupialization are indicated. Following a conservative marsupialization procedure in which Carnoy's solution and an iodoform packing were used, the clinical, radiological, and histological evaluation of OKC in a 12-year-old female patient revealed no evidence of recurrence over the subsequent year of follow-up.

Effectiveness of conservative approaches on otologic signs and symptoms in patients with temporomandibular disorders and Meniere's disease: A systematic review.

OBJECTIVE: This systematic review aimed to evaluate the effectiveness of conservative approaches on otologic signs and symptoms in patients affected by Menière's Disease (MD) and temporomandibular disorders (TMD). METHODS: PubMed, Scopus, and Web of Science were systematically searched to identify studies presenting participants with a diagnosis of MD associated with TMD, conservative approaches as interventions, and modification of the otological signs and symptoms as outcome. RESULTS: Out of 627 articles assessed for eligibility, two studies were included. Both studies showed a significant reduction of Situational Vertigo Questionnaire after treatment, number of vertigo spells, Functional Level Scale, Dizziness Hearing Inventory, and Tinnitus Handicap Inventory, after occlusal splint therapy. No significant differences were found in terms of pure-tone audiometry average. CONCLUSION: Findings of this systematic review suggested that conservative approaches might improve vertigo in patients affected by MD and TMD. However, the low number of included studies makes difficult to draw strong conclusions.

Effectiveness of Occlusal Splint Therapy in Moderating Temporomandibular Joint Disorders With Joint Displacement: A Retrospective Analysis Using Cone Beam Computed Tomography.

Background Temporomandibular joint disorders (TMD) represent a prevalent group of conditions impacting the temporomandibular joint. Among the therapeutic interventions, occlusal splint therapy has gained recognition for its potential to address TMD symptoms, particularly in cases involving joint displacement. Objective This study aims to investigate the effectiveness of occlusal splint therapy in cases of moderate TMD with joint displacement, focusing on changes in condylar position, joint morphology, and patient-reported outcomes. Methods A retrospective analysis was conducted involving 148 participants who underwent occlusal splint therapy between January 2018 and December 2020. Data were collected through cone beam computed tomography (CBCT) imaging for precise assessments of condylar position and joint morphology. Ethical approval was obtained, and participants provided informed consent. Baseline characteristics, medical history, and TMD severity were recorded. Occlusal splint therapy included individualized fabrication, occlusal analysis, adjustments for optimal fit, and prescribed wear schedules. Follow-up included CBCT scans at specified intervals (three months and six months), with participant-reported outcomes collected. The data analysis was conducted using IBM SPSS Statistics for Windows, Version 22.0 (Released 2013; IBM Corp., Armonk, NY, USA). Paired t-tests or nonparametric equivalents were employed to assess changes in condylar position and joint morphology. Subgroup analyses were conducted to explore potential factors influencing treatment outcomes. The significance level was set at p < 0.05 for all statistical tests. Results The entire cohort (n = 148) had a mean age of 32.5 years (± 8.1), with a balanced gender distribution. Changes in condylar position revealed a statistically significant improvement (p = 0.03), with a mean decrease of 0.2 mm posttreatment. Joint morphology changes indicated increased joint space width (p = 0.01), improved disc position (p = 0.02), and nonsignificant alterations in bony structures (p = 0.10). Patient-reported outcomes demonstrated significant improvements in pain levels, jaw functionality, and satisfaction (all p < 0.001). Age and gender subgroup analyses showed consistent improvements in condylar position, joint morphology, and patient-reported outcomes across different groups. Conclusion Occlusal splint therapy demonstrated effectiveness in improving condylar position, joint morphology, and patient-reported outcomes in cases of moderate TMD with joint displacement. The findings underscore the potential of occlusal splint therapy as a viable intervention for managing TMD, providing valuable insights for clinicians and researchers.

Evaluation of functional interaction masseter and sternocleidomastoid muscles affected by TMJ dysfunction.

OBJECTIVE: Aim: To evaluate the functional connection and the bioelectrical state of the m.masseter and m. sternocleidomastoid using functional tests before and after treatment. PATIENTS AND METHODS: Materials and Methods: The sample consisted of 21 individuals with temporomandibular joint dysfunction. Examinations were carried out before and after treatment using repositioning splint therapy and in seated/standing positions. RESULTS: Results: M. masseter - p=0.072 before treatment and p=0.821 after treatment. Symmetry is also maintained after treatment. After treatment, a significant difference is noted at the level of significance p<0.001 for the right chewing muscle. In seated and standing positions before treatment did not reveal a statistically significant difference (p=0.07, p=0.143) and after (p=0.272, p=0.623).M. sternocleidomastoid- p<0.001 when comparing right and left sides. After treatment, there was no difference between the right and left sides (p=0.169). No statistical difference was found when assessing indicators separately for the right and left muscles in seated and standing positions (p=0.304, p=0.611, p=0.089, p=0.869). When comparing the bioelectric potentials of the right muscle before, after treatment, a statistically significant difference was found p=0.001. CONCLUSION: Conclusions: Biostatistical analysis of the indicators of bioelectrical activity of m. masseter and sternocleidomastoid indicates no changes in muscle microvolt indicators with changes in body position in patients. However, repositioning splint therapy is associated with reduced muscle tone in initially more spasmodic muscles. It is worth noting that the symmetry of interaction between muscles improves.

Clinical effect of digitalized designed and 3D-printed repositioning splints in the treatment of anterior displacement of temporomandibular joint disc.

OBJECTIVE: To compare the treatment effectiveness of digitized and 3D-printed repositioning splints with that of conventional repositioning splints in the treatment of anterior displacement of the temporomandibular joint disc. METHODS: This retrospective study included 96 patients with disc displacement of the anterior temporomandibular joint. They were treated with either digitally designed and 3D-printed repositioning splints or traditional splints and followed up for at least six months. Changes in signs and symptoms such as pain and mouth opening before and after treatment were recorded to evaluate treatment outcomes. RESULTS: During the first month of treatment, both the digitally designed and 3D-printed repositioning splint groups (Group B) and the traditional repositioning splint group (Group A) showed significant increases in mouth opening, with increases of 4.93 ± 3.06 mm and 4.07 ± 4.69 mm, respectively, and there was no significant difference between the two groups. Both groups had a significant reduction in visual analog scale (VAS) pain scores, with Group B showing a greater reduction of 1.946 ± 1.113 compared to 1.488 ± 0.978 in Group A (P < 0.05). By the sixth month, Group B's mouth opening further improved to 38.65 ± 3.22 mm (P < 0.05), while Group A's mouth opening did not significantly improve. Regarding pain, Group A's VAS score decreased by 0.463 ± 0.778 after one month, and Group B's score decreased by 0.455 ± 0.715; both groups showed significant reductions, but there was no significant difference between the two groups. CONCLUSION: Compared with traditional repositioning splints, digitally designed and 3D-printed repositioning splints are more effective at reducing patient pain and improving mouth opening. 3D-printed repositioning splints are an effective treatment method for temporomandibular joint disc displacement and have significant potential for widespread clinical application.

Comparison of the forearm rotation restriction capacities of four upper-extremity immobilization methods: there is no difference between single and double sugar tong splinting.

BACKGROUND: The aim of this study was to compare the effects of four different immobilization methods [single sugar tong splint (SSTS), double sugar tong splint (DSTS), short arm cast (SAC), and long arm cast (LAC)] commonly used for restricting forearm rotation in the upper extremity. METHODS: Forty healthy volunteers were included in the study. Dominant extremities were used for measurements. Basal pronation and supination of the forearm were measured with a custom-made goniometer, and the total rotation arc was calculated without any immobilization. Next, the measurements were repeated with the SAC, LAC, SSTS and DSTS. Each measurement was compared to the baseline value, and the percentage of rotation restriction was calculated. RESULTS: The most superior restriction rates were observed for the LAC (p = 0.00). No statistically significant difference was detected between the SSTS and DSTS in terms of the restriction of supination, pronation or the rotation arc (p values, 1.00, 0.18, and 0.50, respectively). Statistically significant differences were not detected between the SAC and the SSTS in any of the three parameters (p values, 0.25; 1.00; 1.00, respectively). When the SAC and DSTS were compared, while there was no significant difference between the two methods in pronation (p = 0.50), a statistically significant difference was detected in supination (p = 0.01) and in the total rotation arc (p = 0.03). CONCLUSION: The LAC provides superior results in restricting forearm rotation. The SAC and SSTS had similar effects on forearm rotation. The DSTS, which contains, in addition to the SSTS, a sugar tong portion above the elbow, does not provide additional rotational stability.