The effects of aerobic gymnastics training on performance-related variables in an elite athlete: a 2-year follow-up study.

This study investigates individual performance adaptations on 2 years of training between European Aerobics Championships. An elite, 22-year-old aerobic gymnast performed postural coordination test, Y-Balance test, squat and countermovement jumps, 60 s test of repeated jumps, an isokinetic leg muscle strength test, and the Wingate test. Postural stability and flexibility improved in terms of increased distance achieved in the Y-Balance test in the anterior (by 6.3%), posteromedial (by 2%), and posterolateral (by 4.8%) directions. Lower limb muscular endurance also increased, which can be corroborated by a reduced fatigue index in the 60 s test of repeated jumps (from 42% to 27% after the 1st and to 22% after the 2nd year of training). In addition, mean power increased during dominant (by 23.2% at 60°/s and by 18.5% at 180°/s) and non-dominant leg extension (by 4.9% at 180°/s and by 15.5% at 300°/s), plus dominant leg flexion (by 2.0% at 60°/s and by 6.9% at 300°/s). Similarly, peak torque/body weight ratio increased during dominant (by 24.9% at 60°/s, by 11.5% at 180°/s, and by 2.1% at 300°/s) and non-dominant leg extension (by 0.5% at 60°/s and by 6.4% at 300°/s), plus dominant leg flexion (by 1.7% at 60°/s and by 5.4% at 300°/s). However, 2 years of training failed to show any significant improvements in the explosive power of lower limbs and anaerobic performance. These findings indicate that general aerobic gymnastics training without any specific inputs leads to performance adaptation, namely, in abilities closely related to competition routine (dynamic balance and strength endurance of lower limbs).

Investigating the Effects of Diet-Induced Prediabetes on Skeletal Muscle Strength in Male Sprague Dawley Rats.

Type 2 diabetes mellitus, a condition preceded by prediabetes, is documented to compromise skeletal muscle health, consequently affecting skeletal muscle structure, strength, and glucose homeostasis. A disturbance in skeletal muscle functional capacity has been demonstrated to induce insulin resistance and hyperglycemia. However, the modifications in skeletal muscle function in the prediabetic state are not well elucidated. Hence, this study investigated the effects of diet-induced prediabetes on skeletal muscle strength in a prediabetic model. Male Sprague Dawley rats were randomly assigned to one of the two groups (n = 6 per group; six prediabetic (PD) and six non-pre-diabetic (NPD)). The PD group (n = 6) was induced with prediabetes for 20 weeks. The diet that was used to induce prediabetes consisted of fats (30% Kcal/g), proteins (15% Kcal/g), and carbohydrates (55% Kcal/g). In addition to the diet, the experimental animals (n = 6) were supplied with drinking water that was supplemented with 15% fructose. The control group (n = 6) was allowed access to normal rat chow, consisting of 35% carbohydrates, 30% protein, 15% fats, and 20% other components, as well as ordinary tap water. At the end of week 20, the experimental animals were diagnosed with prediabetes using the American Diabetes Association (ADA) prediabetes impaired fasting blood glucose criteria (5.6-6.9 mmol/L). Upon prediabetes diagnosis, the animals were subjected to a four-limb grip strength test to assess skeletal muscle strength at week 20. After the grip strength test was conducted, the animals were euthanized for blood and tissue collection to analyze glycated hemoglobin (HbA1c), plasma insulin, and insulin resistance using the homeostatic model of insulin resistance (HOMA-IR) index and malondialdehyde (MDA) concentration. Correlation analysis was performed to examine the associations of skeletal muscle strength with HOMA-IR, plasma glucose, HbA1c, and MDA concentration. The results demonstrated increased HbA1c, FBG, insulin, HOMA-IR, and MDA concentrations in the PD group compared to the NPD group. Grip strength was reduced in the PD group compared to the NPD group. Grip strength was negatively correlated with HbA1c, plasma glucose, HOMA-IR, and MDA concentration in the PD group. These observations suggest that diet-induced prediabetes compromises muscle function, which may contribute to increased levels of sedentary behavior during prediabetes progression, and this may contribute to the development of hyperglycemia in T2DM.

Characterization of Flexural Behavior of Hybrid Concrete-Filled Fiber-Reinforced Plastic Piles.

The reinforcing fibers in filament winding fiber-reinforced polymer (FFRP) are not arranged in the axial direction; thus, the members are vulnerable to bending and shear stresses. To address the limitations, this study evaluated FRP-concrete composite piles with reinforcing fiber arranged in circumferential directions. In particular, modular pultruded FRP (PFRP) members were fabricated with reinforcing fibers arranged in the axial and circumferential directions. The exterior of the fabricated PFRP members was reinforced with FFRP, and the flexural performance of these members was investigated through flexural strength tests. The results obtained from the flexural tests and flexural-stiffness prediction formula differed by approximately 0.72-1.36 times. A comparison between the results of the flexural test and flexural-strength prediction equation showed an error of approximately 1 to 10%.

Evaluation of True Bonding Strength for Adhesive Bonded Carbon Fiber-Reinforced Plastics.

Carbon fiber-reinforced thermoplastics (CFRTPs) have attracted attention in aerospace because of their superior specific strength and stiffness. It can be assembled by adhesive bonding; however, the existing evaluation of bonding strength is inadequate. For example, in a single-lap shear test, the weld zone fails in a combined stress state because of the bending moment. Therefore, the strength obtained experimentally is only the apparent strength. The true bonding strength was obtained via numerical analysis by outputting the local stress state at the initiation point of failure. In this study, the apparent and true bonding strengths were compared with respect to three types of strength evaluation tests to comprehensively evaluate bonding strength. Consequently, the single-lap shear test underestimates the apparent bonding strength by less than 14% of the true bonding strength. This indicates that care should be taken when determining the adhesion properties for use in numerical analyses based on experimental results. We also discussed the thickness dependence of the adhesive on the stress state and found that the developed shear test by compression reduced the discrepancy between apparent and true strength compared with the single-lap shear test and reduced the thickness dependence compared with the flatwise tensile test.

Simply adding oral nutritional supplementation to haemodialysis patients may not be enough: a real-life prospective interventional study.

Introduction: Protein-energy wasting (PEW) is a common and serious co-morbidity in haemodialysis (HD) patients. Its importance as a prognostic factor has been increasingly recognised during the past decades. Much effort has been invested in the improvement of nutritional status and amelioration of consequences through different therapeutic approaches, either intradialytic parenteral nutrition or more commonly oral nutritional supplementation. In the article, we present the results of a prospective study in HD patients after 12 months of therapeutic intervention with oral nutritional supplements (ONS). Methods: A total of 92 HD adult patients were enrolled in the study after 3 months of wash-out period. Baseline nutritional status was assessed using composite scores, laboratory markers, bioelectrical impedance analysis, and hand-grip strength test. Patients recognised as undernourished or at high risk for undernutrition received renal-specific commercially available ONS on HD day in addition to their regular diet. After 12 months, the effect of ONS on surrogate markers of undernutrition, serum albumin level, phase angle, and hand-grip strength was analysed in 71 surviving patients. Results: After 12 months, data for 71 patients, 39 (54.9%) men, 62.4 ± 12.9 years, and median haemodialysis vintage 53.3 (IQR 27.5-92.8) months, were available. Patients were divided into three groups: group A patients were with normal nutritional status at baseline not necessitating ONS; group B patients received ONS; and group C patients were entitled to receive but refused to take ONS. The baseline results showed statistically significant differences between the groups in serum albumin levels and phase angle but not hand-grip strength. Differences between the groups remained statistically significant at month 12; we did not find any statistically significant positive changes within the groups, indicating no positive effect of intervention with ONS. Conclusion: In a prospectively designed interventional single-centre study, we did not find a statistically significant change in surrogate markers of PEW in our cohort of HD patients, receiving ONS for 12 months. Since PEW is an independent risk factor influencing the survival of HD patients, efforts should be directed towards a timely and comprehensive nutritional approach, including intensive, personalised dietary counselling, increase in protein and energy intake and advocating tight control of nutritional status during HD treatment, possibly providing psychological support and motivation.

Imipramine Administration in Brucella abortus 2308-Infected Mice Restores Hippocampal Serotonin Levels, Muscle Strength, and Mood, and Decreases Spleen CFU Count.

Brucellosis infection causes non-specific symptoms such as fever, chills, sweating, headaches, myalgia, arthralgia, anorexia, fatigue, and mood disorders. In mouse models, it has been associated with increased levels of IL-6, TNF-α, and IFN-γ, a decrease in serotonin and dopamine levels within the hippocampus, induced loss of muscle strength and equilibrium, and increased anxiety and hopelessness. Imipramine (ImiP), a tricyclic antidepressant, is used to alleviate neuropathic pain. This study evaluated the effects of ImiP on Balb/c mice infected with Brucella abortus 2308 (Ba) at 14- and 28-days post-infection. Serum levels of six cytokines (IFN-γ, IL-6, TNF-α, IL-12, MCP-1. and IL-10) were assessed by FACS, while the number of bacteria in the spleen was measured via CFU. Serotonin levels in the hippocampus were analyzed via HPLC, and behavioral tests were conducted to assess strength, equilibrium, and mood. Our results showed that mice infected with Brucella abortus 2308 and treated with ImiP for six days (Im6Ba14) had significantly different outcomes compared to infected mice (Ba14) at day 14 post-infection. The mood was enhanced in the forced swimming test (FST) (p < 0.01), tail suspension test (TST) (p < 0.0001), and open-field test (p < 0.0001). Additionally, there was an increase in serotonin levels in the hippocampus (p < 0.001). Furthermore, there was an improvement in equilibrium (p < 0.0001) and muscle strength (p < 0.01). Lastly, there was a decrease in IL-6 levels (p < 0.05) and CFU count in the spleen (p < 0.0001). At 28 days, infected mice that received ImiP for 20 days (Im20Ba28) showed preservation of positive effects compared to infected mice (Ba28). These effects include the following: (1) improved FST (p < 0.0001) and TST (p < 0.0001); (2) better equilibrium (p < 0.0001) and muscle strength (p < 0.0001); (3) decreased IL-6 levels (p < 0.05); and (4) reduced CFU count in the spleen (p < 0.0001). These findings suggest the potential for ImiP to be used as an adjuvant treatment for the symptoms of brucellosis, which requires future studies.

Analysis of grip specificity on force production in grapplers and its effect on bilateral deficit grip specificity and bilateral deficit in force production among grapplers.

The use of strength training is important for athletes in combat sports such as judo and jiu-jitsu. Specificity is key when prescribing strength training programs for athletes, considering maximal strength, muscular power and strength-endurance. Grappling combat sports require grip control, which is necessary to execute throwing techniques and groundwork. The aim of this study was to verify the bilateral strength deficit in general and in grappling combat sport-specific action in the control group and grapplers. A sample of 73 subjects, divided into 2 groups, was used: the Student Group (15 females and 16 males) and the Grappler Group (29 males and 13 females). The male and female participants attended four laboratory sessions over a 48-hour interval, the first two to familiarize themselves with the Electromechanical Functional Dynamometer (EMFD), and the last two to collect maximal isometric strength data, using a standard grip and a judo/jiujitsu specific grip. Significant differences in mean and peak forces (p < 0.001) were found, with high performance combat sport athletes having greater maximal isometric strength compared to students both bilaterally and unilaterally (p < 0.001). All comparisons also indicated higher values for males compared to females (p < 0.001). The results suggest that specific training in combat sports as well as sex differences play a significant role in maximal isometric strength performance. The type of grip used affects the application of force in the upper limb isometric strength tests, finding a main effect of grip type (p < 0.001), with the standard grip obtaining higher levels. However, the dominance between hands remains constant. More research is needed on specific judogi/jiu-jitsu-gi grips and their impact on maximal isometric strength with the EMFD.

Finite element analysis predictions in the canine lumbar spine are useful and correlate with ex vivo biomechanical studies.

OBJECTIVE: To verify the validity of finite element analysis (FEA) predictions obtained from a canine lumbar segment model in comparison with experimental biomechanical testing results from the same subjects. ANIMALS: 6 healthy beagle dogs were euthanized for other purposes. METHODS: The L1-2 and L5-6 segments were harvested from euthanized animals and subjected to rotation tests and compression tests, respectively, using both ex vivo mechanical testing and FEA. For each method, we recorded the maximum torque value and angle of vertebral body rotation at rupture observed in rotation tests, as well as the maximum stress value and displacement of the vertebral body endplate at rupture measured from compression tests. We then calculated Pearson's correlation coefficient to determine correlations between the angle of gyration and displacement at rupture determined by mechanical testing and FEA. The study started on March 26, 2021, and ended on March 18, 2023. RESULTS: For the rotation test, correlation coefficients for the maximum torque and rotation angle of the vertebral body at rupture were r = 0.92 and 0.96, respectively. For the compression test, correlation coefficients for the maximum stress and displacement of the vertebral body endplate at rupture were r = 0.73 and 0.94, respectively. All results showed strong correlations between the FEA predictions and ex vivo mechanical test results. CLINICAL RELEVANCE: These findings suggest that FEA predictions are sufficiently reliable for ex vivo mechanical test results for biomechanical studies of canine lumbar segment models.

Effect of Ultrafine Cement (UFC) on the Corrosion Resistance of Cement Soil in Peat Soil Environment.

Many peat soils are distributed around plateau lakes, and the reinforcement of peat soils with high organic matter content by ordinary cement cannot meet the actual engineering requirements. In order to obtain better mechanical properties and durability of the reinforcement, this experiment prepared peat soil by mixing humic acid reagent into the alluvial clay soil with low organic matter content. The cement soil samples were prepared by adding cement and ultrafine cement (UFC) by stirring method; the samples were then soaked in fulvic acid solution to simulate the cement soil in the peat soil environment. Using the unconfined compressive strength (UCS) test, scanning electron microscope (SEM) test, and pores and cracks analysis system (PCAS) test, the effect of UFC content change on cement soil's humic acid erosion resistance was explored, and the optimal UFC content range was sought. The results of the UCS test show that with an increase in immersion time, the strength curves of cement soil samples gradually increase to the peak strength and then decrease. Significant differences in the time correspond to the peak strength, and the overall presentation is two processes: the strength enhancement stage and the corrosion stage of the sample. The incorporation of UFC makes the cement soil in the peat soil environment exhibit excellent corrosion resistance, and the optimal UFC content is 10%. The results of the SEM and PCAS tests show that the microstructure of cement soil after immersion time exceeds 90 days, increases with an increase in immersion time, and its structural connectivity gradually weakens. The excellent characteristics of UFC particles, such as small particle size, narrow particle size distribution, fast hydration reaction rate, high hydration degree, and many hydration products, weakened the adverse effects of humic acid on the cement soil structure to a certain extent. Therefore, although the number of macropores increases, they are not connected. It still presents a relatively compact honeycomb overall structure, which correlates well with the UCS results.

Effects of Different Loading Types on the Validity and Magnitude of Force-Velocity Relationship Parameters.

BACKGROUND: Force-velocity (F-V) relationship models gained popularity as a tool for muscle mechanical assessment. However, it is not clear whether the validity of the F-V relationship parameters (maximal theoretical force [F0], velocity [V0] and power [Pmax]) is affected using different load types: gravitational (W, rubber bands pulling the barbell downward), inertial (I, rubber bands pulling the barbell, which is equalized to the weight of the added plates upward), and combined (W + I, weight of the plates). HYPOTHESIS: Load type would affect both the magnitude and validity of F-V relationship parameters. The highest magnitude and validity was expected for F0 using a W, for V0 using an I, and for Pmax using a W + I load. STUDY DESIGN: Cross-sectional. LEVEL OF EVIDENCE: Level 3. METHODS: A total of 13 resistance-trained men (body mass, 87.7 ± 11.2 kg and body height, 183.9 ± 6.4 cm) performed bench press (BP) throws (BPTs) using 3 types of loads against 30 to 80 kg. The validity of F-V relationship parameters was explored with respect to the tests used traditionally for force (maximal voluntary contraction and 1-repetition maximum [1RM]), velocity (maximal velocity achieved during almost unloaded tasks), and power (BPT against the 50%1RM and medicine ball throws) assessment. RESULTS: The W + I loading promoted the highest values of F0 and Pmax, while the highest magnitude of V0 was promoted by the I loading. The validity was acceptable for F0 obtained using the 3 loading conditions with respect to the BP 1RM (r range, 0.30-0.83), and V0 obtained using the I loading with respect to the stick throw (r = 0.54). CONCLUSION: The magnitude of the F-V relationship parameters is affected by load type, but their validity with respect to standardized tests is comparable, with the exception of the higher validity of V0 when obtained using the I loading. CLINICAL RELEVANCE: Any load type can be used for assessing F0, while I load should be selected when assessing V0.

Biomechanical Evaluation of Temporomandibular Joint Reconstruction Using Individual TMJ Prosthesis Combined with a Fibular Free Flap in a Pediatric Patient.

The main aim of this study was to perform a complex biomechanical analysis for a custom-designed temporomandibular joint (TMJ) prosthesis in combination with a fibular free flap in a pediatric case. Numerical simulations in seven variants of loads were carried out on 3D models obtained based on CT images of a 15-year-old patient in whom it was necessary to reconstruct the temporal-mandibular joints with the use of a fibula autograft. The implant model was designed based on the patient's geometry. Experimental tests on a manufactured personalized implant were carried out on the MTS Insight testing machine. Two methods of fixing the implant to the bone were analyzed-using three or five bone screws. The greatest stress was located on the top of the head of the prosthesis. The stress on the prosthesis with the five-screw configuration was lower than in the prosthesis with the three-screw configuration. The peak load analysis shows that the samples with the five-screw configuration have a lower deviation (10.88, 0.97, and 32.80%) than the groups with the three-screw configuration (57.89 and 41.10%). However, in the group with the five-screw configuration, the fixation stiffness was relatively lower (a higher value of peak load by displacement of 171.78 and 86.46 N/mm) than in the group with the three-screw configuration (where the peak load by displacement was 52.93, 60.06, and 78.92 N/mm). Based on the experimental and numerical studies performed, it could be stated that the screw configuration is crucial for biomechanical analysis. The results obtained may be an indication for surgeons, especially during planning personalized reconstruction procedures.

The Effect of Addition Potassium Permanganate on Bond Strength of Hot-Dip Galvanized Plain Bars with Cement Paste.

In this paper, the effect of gradually increasing amounts of KMnO4 (10-4, 10-3, 10-2 mol·L-1) in cement paste on the bond strength of a plain hot-dip galvanized steel bar was evaluated. The open-circuit potential of HDG samples in cement paste with various additions of MnO4- was monitored in order to follow a transfer of zinc from activity to passivity. Furthermore, the influence of the addition of these anions on the physicochemical properties of normal-strength concrete or cement paste was evaluated by means of hydration heat measurements, X-ray diffraction analysis, and compressive strength. The effective concentration of MnO4- anions prevents the corrosion of the coating with hydrogen evolution and ensures that the bond strength is not reduced by their action, which was determined to be 10-3 mol·L-1. Lower additions of MnO4- anions (10-4 mol·L-1) are ineffective in this respect. On the other hand, higher additions of MnO4- anions (10-2 mol·L-1), although they ensure the corrosion of the coating in fresh concrete without hydrogen evolution, but affect the hydration process of the cement paste that was demonstrated by slight water separation.

Use of force-velocity relationship to estimate the one-repetition maximum leg press exercise among young females.

[Purpose] This study aimed to determine the concurrent validity of using force at a velocity of 0 m/s when estimating the one-repetition maximum leg press and develop and assess the accuracy of an equation to estimate the one-repetition maximum value. [Participants and Methods] Ten untrained healthy females participated. We directly measured the one-repetition maximum during the one leg press exercise and developed the individual force-velocity relationship using the trial with the highest mean propulsive velocity at 20% and 70% of the one-repetition maximum. We then used the force at a velocity of 0 m/s to estimate the measured one-repetition maximum. [Results] The force at a velocity of 0 m/s was strongly correlated with the measured one-repetition maximum. A simple linear regression analysis revealed a significant estimated regression equation. The multiple coefficient of the determination of this equation was 0.77, while the standard error of the estimate of the equation was 12.5 kg. [Conclusion] The estimation method based on the force-velocity relationship was highly valid and accurate at estimating the one-repetition maximum for the one leg press exercise. The method provides valuable information to instruct untrained participants at the start of resistance training programs.

Additional Active Movements Are Not Required for Strength Gains in the Untrained during Short-Term Whole-Body Electromyostimulation Training.

Recommendations for conventional strength training are well described, and the volume of research on whole-body electromyostimulation training (WB-EMS) is growing. The aim of the present study was to investigate whether active exercise movements during stimulation have a positive effect on strength gains. A total of 30 inactive subjects (28 completed the study) were randomly allocated into two training groups, the upper body group (UBG) and the lower body group (LBG). In the UBG (n = 15; age: 32 (25-36); body mass: 78.3 kg (53.1-114.3 kg)), WB-EMS was accompanied by exercise movements of the upper body and in the LBG (n = 13; age: 26 (20-35); body mass: 67.2 kg (47.4-100.3 kg)) by exercise movements of the lower body. Therefore, UBG served as a control when lower body strength was considered, and LBG served as a control when upper body strength was considered. Trunk exercises were performed under the same conditions in both groups. During the 20-min sessions, 12 repetitions were performed per exercise. In both groups, stimulation was performed with 350 µs wide square pulses at 85 Hz in biphasic mode, and stimulation intensity was 6-8 (scale 1-10). Isometric maximum strength was measured before and after the training (6 weeks set; one session/week) on 6 exercises for the upper body and 4 for the lower body. Isometric maximum strength was significantly higher after the EMS training in both groups in most test positions (UBG p < 0.001-0.031, r = 0.88-0.56; LBG p = 0.001-0.039, r = 0.88-0.57). Only for the left leg extension in the UBG (p = 0.100, r = 0.43) and for the biceps curl in the LBG (p = 0.221, r = 0.34) no changes were observed. Both groups showed similar absolute strength changes after EMS training. Body mass adjusted strength for the left arm pull increased more in the LBG group (p = 0.040, r = 0.39). Based on our results we conclude that concurring exercise movements during a short-term WB-EMS training period have no substantial influence on strength gains. People with health restrictions, beginners with no experience in strength training and people returning to training might be particularly suitable target groups, due to the low training effort. Supposedly, exercise movements become more relevant when initial adaptations to training are exhausted.

Experimental Study on Silt Soil Improved by Microbial Solidification with the Use of Lignin.

At present, in the field of geotechnical engineering and agricultural production, with increasingly serious pollution an environmentally friendly and efficient means is urgently needed to improve the soil mass. This paper mainly studied the microbial induced calcium carbonate precipitation (MICP) technology and the combined effect of MICP technology and lignin on the improvement of silt in the Beijing area. Through unconfined compressive strength and dynamic triaxial test methods, samples improved by microorganisms were studied to obtain the optimal values of cement concentration and lignin under these two test schemes. The results show that after the incubation time of Sporosarcina pasteurii reached 24 h, the OD600 value was 1.7-2.0 and the activity value (U) was 930-1000 mM ms/min. In the unconfined static pressure strength test, after MICP treatment the optimal concentration of cementitious solution for constant temperature and humidity samples and constant-temperature immersion samples was 1.25 mol/L. The compressive strength of the constant temperature and humidity sample was 1.73 MPa, and the compressive strength of the constant-temperature immersion sample was 3.62 Mpa. At the concentration of 1.25 mol/L of cement solution, MICP technology combined with lignin could improve the constant temperature and humidity silt sample. The optimal addition ratio of lignin was 4%, and its compressive strength was 1.9 MPa. The optimal lignin addition ratio of the sample soaked at a constant temperature was 3%, and the compressive strength was 4.84 MPa. In the dynamic triaxial multi-stage cyclic load test, the optimal concentration of cementation solution for the constant temperature and humidity sample after MICP treatment was 1.0 mol/L, and the failure was mainly inclined cracks. However, in the condition of joint improvement of MICP and lignin, the sample mainly had a drum-shaped deformation, the optimal lignin addition ratio was 4%, and the maximum axial load that the sample could bear was 306.08 N. When the axial dynamic load reached 300 N, the strain accumulation of the 4% group was only 2.3 mm. In this paper, lignin, an ecofriendly material, was introduced on the basis of MICP technology. According to the failure shape and relevant results of the sample, the addition of lignin was beneficial for the improvement of the compressive strength of the sample.

Influence of different tooth etchants on bur-cut and uncut enamel.

This study aimed to evaluate the effect of pre-etching for two-step self-etch adhesive bonding to bur-cut and uncut enamel. Bur-cut and uncut enamel surfaces were assigned to surface treatments of no etchant (CT), Enamel Conditioner (EC; Shofu, Kyoto, Japan), or K-etchant syringe (KE; Kuraray Noritake Dental, Tokyo, Japan). The bonded samples were thermal cycled and evaluated by microshear bond strength (µSBS). The adhesive interface after acid-base challenge and the conditioned enamel surfaces were morphologically analyzed using scanning electron microscopy (SEM). For bur-cut enamel, EC and KE pre-etching significantly improved µSBS. For uncut enamel, KE showed higher µSBS than EC. SEM observation revealed that only KE removed the prismless layer of the uncut enamel surface. EC could improve enamel bonding and appears to be a substitute for phosphoric acid, especially for bur-cut enamel. However, uncut enamel could not be effectively conditioned by EC with a lower bond strength than KE.

Reliability and Validity of Functional Grip Strength Measures Across Holds and Body Positions in Climbers: Associations With Skill and Climbing Performance.

Purpose: In climbing, exceptional levels of fingertip strength across different holds and body positions are considered essential for performance. There is no commonly agreed upon way to measure such "grip strength variability." Furthermore, the accurate and reliable monitoring of strength is necessary to achieve safe, progressive improvement in strength. Therefore, this study aimed to develop reliability and criterion validity for assessment of grip strength across multiple holds and body positions. Methods: Twenty-two advanced toelite climbers (age = 28.5 ± 8.6 years) performed maximal voluntary isometric contractions on two occasions (for test-retest reliability). Conditions included two hold types (edge and sloper) tested in two postures (elbow flexion [90°] and self-preferred). Climbing performance was determined on two "difficulty" routes (difficulty increases with each hold): one route composed of only edges and another only of slopers. Results: Test-retest reliability was high (ICC between 0.94-0.99). Significant positive correlations were observed for the forces produced on the sloper test and climbing distance on the sloper route (r = 0.512,p < .05), and for the forces produced on the edge test and climbing distance on the edge route (ρ = 0.579, p < .01). Conclusion: These findings support reliability and validity of the method used to measure grip strength variability with different holds and body positions and suggest that improving strength across different grasping types supports adaptive climbing performance.

Effect of temporary cements and their removal methods on the bond strength of indirect restoration: a systematic review and meta-analysis.

OBJECTIVES: For a conventional indirect restoration, temporary cementation inevitably contaminated collapsed dentin collagen. The purpose of this review was to evaluate the optimal strategy for minimizing its negative effects. MATERIAL AND METHODS: Databases such as PubMed, Web of Science, EMBASE, and the Cochrane Library were searched for in vitro studies, involving the influence of immediate dentin sealing (IDS), different temporary cements, and their removal strategies on dentin bond strength. The meta-analysis used the inverse variance method with effect method of the standardized mean difference and statistical significance at p ≤ 0.05. The I2 value and the Q-test were used to assess the heterogeneity. RESULTS: A total of 14 in vitro trials were subjected to the meta-analysis. Within the study's limitations, we assumed that IDS eliminated the negative effects of temporary bonding, achieving the comparable immediate bond strength with the control (p = 0.46). In contrast, under delayed dentin sealing (DDS), temporary cementation statistically decreased bond strength (p = 0.002). Compared with resin-based and non-eugenol zinc oxide cements, polycarboxylate and calcium hydroxide cements performed better on bond strength with no statistical difference from the control group (p > 0.05). Among the removal methods of temporary cements, the Al2O3 abrasion restored the decreased bond strength (p = 0.07) and performed better than hand instruments alone (p = 0.04), while pumice removal slightly reduced the bond strength in contrast with the control group (p = 0.05, 95% CI = - 1.62 to 0). CONCLUSIONS: The choices of IDS, polycarboxylate and calcium hydroxide temporary cements, Al2O3 abrasion removal method were feasible and efficient to enhance the bond strength. CLINICAL RELEVANCE: It is worthwhile applying IDS technique, polycarboxylate and calcium hydroxide temporary cements during indirect restoration. The Al2O3 abrasion of cleaning dentin can minimize the negative effects of temporary cement.

Using the Countermovement Jump Metrics to Assess Dynamic Eccentric Strength: A Preliminary Study.

Background: This study aimed to determine the validity and reliability of the countermovement jump (CMJ) as a dynamic eccentric (Ecc) strength test. Methods: Thirty-three college male student-athletes were recruited to participate in this study. The participants first performed CMJs with the second consisting of one repetition maximum back squat (1RM-BS) test. CMJ and 1RM-BS tests were performed on twin force plates. Results: The CMJ had significant correlations with the Ecc peak force (EccPF), and Ecc mean force (EccMF) of 1RM-BS, respectively (r = 0.61−0.69). Moreover, all parameters had a coefficient of variation (CV) < 10%. The intraclass correlation coefficient (ICC) values were moderate to excellent for each metric using the CMJ (0.94−0.97). The 1RM-BS and CMJ EccPF, EccMF Bland-Altman bias estimate variance ratio is 1.31−1.67, showing a moderate-large correlation in the Bland-Altman plot. Conclusions: CMJ ECC phase kinetics were associated with the 1RM-BS EccPF and EccMF. The CMJ can be an alternative tool for eccentric dynamic strength assessment.

Evaluation of the Chemical, Morphological, Physical, Mechanical, and Biological Properties of Chitosan/Polyvinyl Alcohol Nanofibrous Scaffolds for Potential Use in Oral Tissue Engineering.

Background Chitosan is a biocompatible, biodegradable, and non-toxic natural polymer that can be fabricated by different methods for use in dental and biomedical fields. Electrospinning can produce polymeric nanofibrous scaffolds and membranes with desirable properties for use in tissue engineering. The objectives of this study were to investigate several morphological, physical, and biological characteristics of these nanofibrous scaffolds and evaluate their potential use in tissue engineering. Methodology Chitosan/polyvinyl alcohol nanofibrous scaffolds (CS/PVA NFS) in a ratio of 70/30 were fabricated by conventional electrospinning. The scaffolds were evaluated chemically by Fourier transformed infrared spectroscopy (FTIR) and morphologically by the atomic force microscope (AFM) and the field emission-scanning electron microscope (FE-SEM). These scaffolds were also evaluated mechanically by a tensile strength test and several investigations, including water contact angle, swelling ratio, and degradation ratio. Biological evaluations included protein adsorption, cell culture, and cell viability assay. Results The morphological evaluation revealed a homogenous, bead-free mat with an average fiber diameter of 172.7 ± 56.8 nm, an average pore size of 0.54 ± 0.17 µm, and porosity of 74.8% ± 3.3%; the scaffolds showed a tensile strength of 6.67 ± 0.7 Mpa. Scaffolds showed a desired hydrophilic property, as shown by the water contact angle test with a mean angle of 29.5°, while the swelling ratio was 229%, and degradability in phosphate buffer solution after 30 days was 26.9 ± 2.9%. In-vitro cell culture study with adipose tissue mesenchymal stem cells and cell viability and cytotoxicity tests by MTT assay demonstrated well-attached cells with increasing proliferation rate with no signs of cytotoxicity. Conclusions Assessment of the CS/PVA NFS revealed randomly oriented bead-free and porous mats. The scaffolds were stable at aqueous solutions following thermal treatment. They were hydrophilic, biodegradable, and biocompatible, as shown by the cell culture and MTT assay, which suggest that the fabricated scaffolds have the potential to be used in tissue engineering applications either as scaffolds, bio-grafts, or barrier membranes.