Sustained release of brimonidine from conjunctival sac insert to reduce intraocular pressure for glaucoma treatment.

BACKGROUND: Glaucoma is one of the major irreversible blinding eye diseases in the world. Reducing intraocular pressure (IOP) is the primary treatment option, and taking eye drops daily is the common method. However, short drug duration and poor bioavailability of eye drops may lead to unsatisfied therapeutic effects and inadequate patient compliance. METHODS: A brimonidine-loaded silicone rubber insert (BRI@SR@PT) was prepared by loading brimonidine into a surface-modified silicone rubber ring, followed by polydopamine/thermoplastic polyurethane coatings. The physical properties, in vitro cytocompatibility and drug release of BRI@SR@PT were investigated. The BRI@SR@PT was administrated in the conjunctival sac of rabbit eyes and its in vivo drug release, IOP-lowering efficacy and biosafety were assessed. RESULTS: The BRI@SR@PT presented great thermal stability and excellent elasticity. The BRI@SR@PT was able to release BRI sustainably for 28 days with little toxicity in vitro. Compared to BRI eye drops, the BRI@SR@PT effectively lowered IOP for 21 days based on the sustained BRI release with great biosafety when administrated in conjunctival sac of rabbit eyes in a noninvasive fashion. CONCLUSIONS: The conjunctival sac insert (BRI@SR@PT), as a promising drug-delivery platform, may provide a sustained IOP-lowering treatment for patients with ocular hypertension or glaucoma, without need for invasive procedures.

Sustained Release of Liposomal Curcumin: Enhanced Periodontal Outcomes in Diabetic Patients.

OBJECTIVE: To evaluate the effect of entrapment of curcumin within liposomal formulation and the sustained release attitude of the formulated liposomal gel on periodontal defects in diabetic patients in clinical and biochemical terms. METHODS: Thirty diabetic patients with periodontitis were randomly assigned to three equal groups and ten healthy participants were assigned as the control group. Group I was subjected to scaling and root planing (SRP) with application of sustained release liposomal curcumin gel. Group II was subjected to scaling and root planning with application of curcumin gel. Group III was subjected to scaling and root planning with application of placebo gel. Group IV (control group), no intervention was done. The following parameters were evaluated before treatment and after 6 and 12 weeks: plaque index (PI), gingival index (GI), probing depth (PD), clinical attachment level (CAL), tumour necrosis factor alpha (TNF-α), interleukin 1 beta (IL-1ß) and total antioxidant capacity (TAC). RESULTS: All study groups showed improvement in clinical and biochemical parameters that are statistically significant. Upon comparing the results of treatment modalities, the highest improvement was achieved in group I followed by group II then group III. CONCLUSION: Sustained release liposomal curcumin gel enhanced the antioxidant capacity, decreased the inflammatory mediators and showed more improvement in clinical outcome for treatment of periodontitis in diabetic patients.

Injectable long-acting formulations (ILAFs) and manufacturing techniques.

INTRODUCTION: Most therapeutics delivered using short-acting formulations need repeated administration, which can harm patient compliance and raise failure risks related to inconsistent treatment. Injectable long-acting formulations (ILAFs) are controlled/sustained-release formulations fabricated to deliver active pharmaceutical ingredients (APIs) and extend their half-life over days to months. Longer half-lives of ILAFs minimize the necessity for frequent doses, increase patient compliance, and reduce the risk of side effects from intravenous (IV) infusions. Using ILAF technologies, the immediate drug release can also be controlled, thereby minimizing potential adverse effects due to high initial drug blood concentrations. AREA COVERED: In this review, we have discussed various ILAFs, their physiochemical properties, fabrication technologies, advantages, and practical issues, as well as address some major challenges in their application. Especially, the approved ILAFs are highlighted. EXPERT OPINION: ILAFs are sustained-release formulations with extended activity, which can improve patient compliance. ILAFs are designed to deliver APIs like proteins and peptides and extend their half-life over days to months. The specific properties of each ILAF preparation, such as extended-release and improved drug targeting capabilities, make them an effective approach for precise and focused therapy. Furthermore, this is especially helpful for biopharmaceuticals with short biological half-lives and low stability since most environmental conditions can protect them from sustained-release delivery methods.

Evaluating the effect of sodium alginate and sodium carboxymethylcellulose on pulmonary delivery of levofloxacin spray-dried microparticles.

BACKGROUND: Patients with cystic fibrosis commonly suffer from lung infections caused by Pseudomonas aeruginosa. Recently, the Levofloxacin (LVF) nebulizing solution (Quinsair®) has been prescribed for the antimicrobial management. The sustained-release (SR) dry powder formulation of LVF is a convenient alternative to Quinsair®. It has the potential to enhance patient convenience and decrease the likelihood of drug resistance over time. OBJECTIVE: In this paper, we set forth to formulate and evaluate the potential application of sodium alginate (SA) and sodium carboxymethylcellulose (SCMC) for sustained pulmonary delivery of LVF. METHODS: The spray-dried (SD) LVF microparticles were formulated using SCMC and SA along with L-leucine (Leu). The microparticles were analyzed in terms of particle size, morphology, x-ray diffraction (XRD), in-vitro drug release, and aerodynamic properties. Selected formulations were further proceeded to short-term stability test. RESULTS: The polymer-containing samples displayed process yield of 33.31%-39.67%, mean entrapment efficiency of 89% and volume size within the range of 2-5 µm. All the hydrogel microparticles were amorphous and exhibited rounded morphology with surface indentations. Formulations with a drug-to-excipient ratio of 50:50 and higher, showed a 24-h SR. The aerodynamic parameters were fine particle fraction and emitted dose percentage ranging between 46.21%-60.6% and 66.67%-87.75%, respectively. The short-term stability test revealed that the formulation with a 50:50 drug-to-excipient ratio, containing SA, demonstrated better physical stability. CONCLUSION: The selected formulation containing SA has the potential to extend the release duration. However, further enhancements are required to optimize its performance.

Paravertebrally-Injected Multifunctional Hydrogel for Sustained Anti-Inflammation and Pain Relief in Lumbar Disc Herniation.

Pain caused by lumbar disc herniation (LDH) severely compromises patients' quality of life. The combination of steroid and local anesthetics is routinely employed in clinics to alleviate LDH-induced pain. However, the approach only mediates transient efficacy and requires repeated and invasive lumbar epidural injections. Here a paravertebrally-injected multifunctional hydrogel that can efficiently co-load and controlled release glucocorticoid betamethasone and anesthetics ropivacaine for sustained anti-inflammation, reactive oxygen species (ROS)-removal and pain relief in LDH is presented. Betamethasone is conjugated to hyaluronic acid (HA) via ROS-responsive crosslinker to form amphiphilic polymer that self-assemble into particles with ropivacaine loaded into the core. Solution of drug-loaded particles and thermo-sensitive polymer rapidly forms therapeutic hydrogel in situ upon injection next to the herniated disc, thus avoiding invasive epidural injection. In a rat model of LDH, multifunctional hydrogel maintains the local drug concentration 72 times longer than free drugs and more effectively inhibits the expression of pro-inflammatory cytokines and pain-related molecules including cyclooxygenase-2 (COX-2) and prostaglandin E2 (PGE2). Therapeutic hydrogel suppresses the LDH-induced pain in rats for 12 days while the equivalent dose of free drugs is only effective for 3 days. This platform is also applicable to ameliorate pain caused by other spine-related diseases.

Advances in Ophthalmic Therapeutic Delivery: A Comprehensive Overview of Present and Future Directions.

Ophthalmic treatment demands precision and consistency in delivering therapeutic agents over extended periods to address many conditions, from common eye disorders to complex diseases. The diversity of conditions necessitates a range of delivery strategies, each tailored to specific needs. This comprehensive paper delves into various delivery cargos that are pivotal in ophthalmic care. These cargos encompass biodegradable implants that gradually release medication, nonbiodegradable implants for sustained drug delivery, refillable tools allowing flexibility in treatment, hydrogels capable of retaining substances while maintaining ocular comfort, and advanced nanotechnology devices that precisely target eye tissues. Within each cargo category, we explore cutting-edge research-level approaches and FDA-approved methods, providing a thorough overview of the current state of ophthalmic drug delivery. In particular, our focus on nanotechnology tools reveals the promising potential for gene delivery, cell therapy administration, and the implantation of active devices directly into the retina. These advancements hold the key to more effective, personalized, and minimally invasive ophthalmic treatments, revolutionizing the field of eye care.

Polystyrene sulfonate resin as an ophthalmic carrier for enhanced bioavailability of ligustrazine phosphate controlled release system.

Topical ocular sustained-release drug delivery systems represent an effective strategy for the treatment of ocular diseases, for which a suitable carrier has yet to be sufficiently developed. Herein, an eye-compatible sodium polystyrene sulfonate resin (SPSR) was synthesized with a uniform particle size of about 3 µm. Ligustrazine phosphate (LP) was adsorbed to SPSR by cation exchange to form LP@SPSR. LP@SPSR suspension eye drops were further developed using the combination of Carbopol 934P and xanthan gum as suspending agents. The LP@SPSR suspension showed a sustained release in vitro, which was consistent with the observed porcine corneal penetration ex vivo. Pharmacokinetics in tear fluid of rabits indicated that LP@SPSR suspension led to prolonged ocular retention of LP and a 2-fold improved the area under the drug concentration-time curve (AUC0-t). Pharmacokinetics in the aqueous humor of rabbits showed 2.8-fold enhancement in the AUC0-t compared to LP solution. The LP@SPSR suspension exhibited no cytotoxicity to human corneal epithelial cells, nor irritation was observed in rabbit eyes. Thus, the LP@SPSR suspension has been validated as a safe and sustained release system leading to enhanced ophthalmic bioavailability for treating ocular diseases.

Clinical Application of Different Doses of Hydromorphone Slow-Release Analgesia in Lumbar Fusion in Elderly Patients.

INTRODUCTION: The aim of this study is to examine the analgesic efficacy of varying doses of hydromorphone hydrochloride in conjunction with absorbable gelatin sponge for postoperative pain management in elderly individuals undergoing lumbar fusion surgery. Additionally, the study aims to assess the sustained release analgesic properties of this combination and to determine the optimal dosage of hydromorphone hydrochloride for effective pain relief. METHODS: A total of 113 elderly patients (aged ≥ 65 years old) meeting the criteria for 1-2-level posterior lumbar fusion surgery at Ganzhou City People's Hospital between July 2022 and August 2023 were randomly assigned to four groups: group A (0.2 mg hydromorphone hydrochloride 1 ml), group B (0.3 mg hydromorphone hydrochloride 1.5 ml), group C (0.4 mg hydromorphone hydrochloride 2 ml), and group D (0.9% normal saline 2 ml) for standard anesthesia induction and maintenance. Prior to suturing the incision, gelfoam was utilized to administer epidural analgesia to each group. Following the surgical procedure, an intravenous analgesia pump was utilized for pain management. The baseline infusion rate was set at 0.5 ml/h. Patient-controlled analgesia (PCA) was administered at a dose of 2 ml, with a lockout interval of 20 min, allowing the patient to self-administer as needed. Pain relief was assessed using the visual analogue scale (VAS) prior to surgery, as well as at 1 day and 3 days post-operation. The frequency of PCA requests within the initial 48-h postoperative period, the remedial analgesia with dezocine, postoperative adverse reactions, and duration of hospitalization were documented for analysis. RESULTS: The VAS scores of groups B and C were found to be significantly lower than those of group D 1 day after the operation. Additionally, VAS scores at 3 days post-operation, remedial rate of dezocine and PCA follow-up times at 48 h in groups A, B, and C were significantly lower compared to group D (P < 0.001). There was no statistically significant difference between group B and group C in VAS scores at 1 day and 3 days post-operation, as well as PCA follow-up times at 48 h post-operation (P < 0.001). Furthermore, the VAS scores of groups B and C were lower than those of group A at 1 day and 3 days post-operation (P < 0.05). The PCA frequency of group C was also lower than that of group A at 48 h post-operation (P < 0.05). CONCLUSION: The combination of hydromorphone hydrochloride and absorbable gelatin sponge epidural analgesia has been shown to enhance postoperative pain management. A dosage of 0.4 mg of hydromorphone hydrochloride may be considered an appropriate analgesic dose, as it can provide effective pain relief without eliciting adverse reactions. TRIAL REGISTRATION: ChiCTR.org.cn(ChiCTR2200064863). Registered on October 20, 2022.

Design of berberine hydrochloride sustained-release cold sol using hydroxypropyl methyl cellulose K100M to achieve superior drug dissolution and transdermal absorption.

In this study, berberine hydrochloride (Ber) was used as model drug to prepare a sustained-release cold sol using hydroxypropyl methyl cellulose (HPMC) to achieve superior drug dissolution and transdermal absorption effects. For comparison, a Ber cold sol without HPMC was also prepared using the same method. The preparation process was optimized based on the in vitro release and transdermal permeability of the drug. The results indicated that 1.67 wt% Carbomer 940 and 1.33 wt% HPMC K100M were selected as matrix components with the best sustained-release effect, and drug dissolution of cold sol prepared by combination of these two matrices was significantly slower than the cold sol without HPMC. In addition, transdermal absorption result demonstrated that 0.67 wt% glycerin and 1.33 wt% peppermint oil were the best osmotic enhancers for the optimization of Ber sustained-release cold sol. Herein, HPMC K100M performed important functions in the external application of Ber.

Controlled Quercetin Release by Fluorescent Mesoporous Nanocarriers for Effective Anti-Adipogenesis.

Introduction: Quercetin (QUER), a flavonoid abundant in fruits and vegetables, is emerging as a promising alternative therapeutic agent for obesity treatment due to its antioxidant and anti-adipogenic properties. However, the clinical application of QUER is limited by its poor solubility, low bioavailability, and potential toxicity at high doses. To address these challenges, this study aims to develop an advanced drug delivery system using fluorescent mesoporous silica nanoparticles (FMSNs) coated with polydopamine (PDA) for the efficient and sustained delivery of QUER to inhibit adipogenesis. Methods: The research included the synthesis of PDA-coated FMSNs for encapsulation of QUER, characterization of their mesoporous structures, and systematic investigation of the release behavior of QUER. The DPPH assay was used to evaluate the sustained radical scavenging potential. Concentration-dependent effects on 3T3-L1 cell proliferation, cellular uptake and adipogenesis inhibition were investigated. Results: PDA-coated FMSNs exhibited well-aligned mesoporous structures. The DPPH assay confirmed the sustained radical scavenging potential, with FMSNs-QUER@PDA showing 53.92 ± 3.48% inhibition at 72 h, which was higher than FMSNs-QUER (44.66 ± 0.57%) and free QUER (43.37 ± 5.04%). Concentration-dependent effects on 3T3-L1 cells highlighted the enhanced efficacy of PDA-coated FMSNs for cellular uptake, with a 1.5-fold increase compared to uncoated FMSNs. Adipogenesis inhibition was also improved, with relative lipid accumulation of 44.6 ± 4.6%, 37.3 ± 4.6%, and 36.5 ± 7.3% at 2.5, 5, and 10 µM QUER concentrations, respectively. Conclusion: The study successfully developed a tailored drug delivery system, emphasizing sustained QUER release and enhanced therapeutic effects. FMSNs, especially when coated with PDA, exhibit promising properties for efficient QUER delivery, providing a comprehensive approach that integrates advanced drug delivery technology and therapeutic efficacy.

Silk fibroin microspheres loaded Rehmannia Liuwei extract for the protection of endothelial cells from the inhibitory effects.

Liuwei Dihuang (LWDH) is a multi-component and multi-target Chinese herbal compound widely used for treating chronic conditions such as diabetes, diabetic nephropathy, hypertension, osteoporosis, and chronic kidney disease. However, traditional Chinese medicine (TCM) preparations like decoction and pill face limitations, including low active component concentration, limited bioavailability, short half-life, and the need for high dosage, which may increase the burden on liver and kidney functions and reduce clinical efficacy. In this study, LWDH was further purified using D101 macroporous adsorption resin, resulting in a soluble extract with an active component content 53.6 times higher than that of LWDH itself. The freeze-dried LWDH extract was then encapsulated within silk fibroin (SF) microspheres to significantly enhance the sustained release performance of the drug. In a human umbilical vein endothelial cell (HUVEC) model cultured under high glucose conditions, methanol vapor-treated SF/LWDH microspheres demonstrated a decrease in the 24-hour drug release rate from 61.88 % to 34.81 %, augmenting their protective effect on endothelial cells.

Design and Characterization of Chitosan-Based Smart Injectable Hydrogel for Improved Sustained Release of Antinarcotics.

The treatment adherence of narcotics-addicted individuals with reduced incidences of relapse can be enhanced by a sustained drug release formulation of antinarcotics. So far, different drug formulations have been reported with sustained drug release periods of 28 and 35 days. To further enhance this duration, different formulations of injectable hydrogels (IHs) have been developed by combining low molecular weight (LMW) and high molecular weight (HMW) chitosan (CS) with guar gum (GG) and crosslinking them by sodium bi phosphate dibasic. The structural, morphological, and physicochemical properties of LMW-CS IH, and HMW-CS IH were evaluated using Fourier transform infrared spectroscopy (FT-IR), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), and rheological, swelling, and biodegradation analysis. The HMW-CS IH showed high crosslinking, increased thermal stability, high mechanical strength, elevated swelling, and low biodegradation. The antinarcotic drugs naltrexone (NTX) and disulfiram (DSF) were loaded separately into the HMW-CS IH and LMW-CS IH. The release of NTX and DSF was investigated in phosphate buffer saline (PBS) and ethanol (0.3%, 0.4%, and 0.5%) over a 56-day period using an UV spectrophotometer. The drug release data were tested in zero-order, first-order, and Korsemeyer-Peppas mathematical models. In PBS, all prepared formulations followed non-Fickian drug release, while in ethanol, only NTX HMW-CS IH followed non-Fickian release in all three different concentrations of ethanol.

In Vitro and In Vivo Drug Release from a Nano-Hydroxyapatite Reinforced Resorbable Nanofibrous Scaffold for Treating Female Pelvic Organ Prolapse.

Pelvic prolapse stands as a substantial medical concern, notably impacting a significant segment of the population, predominantly women. This condition, characterized by the descent of pelvic organs, such as the uterus, bladder, or rectum, from their normal positions, can lead to a range of distressing symptoms, including pelvic pressure, urinary incontinence, and discomfort during intercourse. Clinical challenges abound in the treatment landscape of pelvic prolapse, stemming from its multifactorial etiology and the diverse array of symptoms experienced by affected individuals. Current treatment options, while offering relief to some extent, often fall short in addressing the full spectrum of symptoms and may pose risks of complications or recurrence. Consequently, there exists a palpable need for innovative solutions that can provide more effective, durable, and patient-tailored interventions for pelvic prolapse. We manufactured an integrated polycaprolactone (PCL) mesh, reinforced with nano-hydroxyapatite (nHA), along with drug-eluting poly(lactic-co-glycolic acid) (PLGA) nanofibers for a prolapse scaffold. This aims to offer a promising avenue for enhanced treatment outcomes and improved quality of life for individuals grappling with pelvic prolapse. Solution extrusion additive manufacturing and electrospinning methods were utilized to prepare the nHA filled PCL mesh and drug-incorporated PLGA nanofibers, respectively. The pharmaceuticals employed included metronidazole, ketorolac, bleomycin, and estrone. Properties of fabricated resorbable scaffolds were assessed. The in vitro release characteristics of various pharmaceuticals from the meshes/nanofibers were evaluated. Furthermore, the in vivo drug elution pattern was also estimated on a rat model. The empirical data show that nHA reinforced PCL mesh exhibited superior mechanical strength to virgin PCL mesh. Electrospun resorbable nanofibers possessed diameters ranging from 85 to 540 nm, and released effective metronidazole, ketorolac, bleomycin, and estradiol, respectively, for 9, 30, 3, and over 30 days in vitro. Further, the mesh/nanofiber scaffolds also liberated high drug levels at the target site for more than 28 days in vivo, while the drug concentrations in blood remained low. This discovery suggests that resorbable scaffold can serve as a viable option for treating female pelvic organ prolapse.

Fabrication and Optimization of Poly(ε-caprolactone) Microspheres Loaded with S-Nitroso-N-Acetylpenicillamine for Nitric Oxide Delivery.

Heart disease is one of the leading causes of death in the United States and throughout the world. While there are different techniques for reducing or preventing the impact of heart disease, nitric oxide (NO) is administered as nitroglycerin for reversing angina or chest pain. Unfortunately, due to its gaseous and short-lived half-life, NO can be difficult to study or even administer. Therefore, controlled delivery of NO is desirable for therapeutic use. In the current study, the goal was to fabricate NO-releasing microspheres (MSs) using a donor molecule, S-Nitroso-N-Acetyl penicillamine, (SNAP), and encapsulating it in poly(ε-caprolactone) (PCL) using a single-emulsion technique that can provide sustained delivery of NO to cells over time without posing any toxicity risks. Optimization of the fabrication process was performed by varying the duration of homogenization (5, 10, and 20 min) and its effect on entrapment efficiency and size. The optimized SNAP-MS had an entrapment efficiency of ˃50%. Furthermore, we developed a modified method for NO detection by using NO microsensors to detect the NO release from SNAP-MSs in real time, showing sustained release behavior. The fabricated SNAP-MSs were tested for biocompatibility with HUVECs (human umbilical vein endothelial cells), which were found to be biocompatible. Lastly, we tested the effect of controlled NO delivery to human induced pluripotent stem-derived cardiomyocytes (hiPSC-CMs) via SNAP-MSs, which showed a significant improvement in the electrophysiological parameters and alleviated anoxic stress.

Evolving Strategies for Extracellular Vesicles as Future Cardiac Therapeutics: From Macro- to Nano-Applications.

Cardiovascular disease represents the foremost cause of mortality and morbidity worldwide, with a steadily increasing incidence due to the growth of the ageing population. Cardiac dysfunction leading to heart failure may arise from acute myocardial infarction (MI) as well as inflammatory- and cancer-related chronic cardiomyopathy. Despite pharmacological progress, effective cardiac repair represents an unmet clinical need, with heart transplantation being the only option for end-stage heart failure. The functional profiling of the biological activity of extracellular vesicles (EVs) has recently attracted increasing interest in the field of translational research for cardiac regenerative medicine. The cardioprotective and cardioactive potential of human progenitor stem/cell-derived EVs has been reported in several preclinical studies, and EVs have been suggested as promising paracrine therapy candidates for future clinical translation. Nevertheless, some compelling aspects must be properly addressed, including optimizing delivery strategies to meet patient needs and enhancing targeting specificity to the cardiac tissue. Therefore, in this review, we will discuss the most relevant aspects of the therapeutic potential of EVs released by human progenitors for cardiovascular disease, with a specific focus on the strategies that have been recently implemented to improve myocardial targeting and administration routes.

Application of Quality by Design in the Development of Hydrogen Sulfide Donor Loaded Polymeric Microparticles.

Hydrogen sulfide (H2S) is a multifaceted gasotransmitter molecule which has potential applications in many pathological conditions including in lowering intraocular pressure and providing retinal neuroprotection. However, its unique physicochemical properties pose several challenges for developing its efficient and safe delivery method system. This study aims to overcome challenges related to H2S toxicity, gaseous nature, and narrow therapeutic concentrations range by developing polymeric microparticles to sustain the release of H2S for an extended period. Various formulation parameters and their interactions are quantitatively identified using Quality-by-Design (QbD) approach to optimize the microparticle-based H2S donor (HSD) delivery system. Microparticles were prepared using a solvent-evaporation coacervation process by using polycaprolactone (PCL), soy lecithin, dichloromethane, Na2S.9H2O, and silicone oil as polymer, surfactant, solvent, HSD, and dispersion medium, respectively. The microparticles were characterized for size, size distribution, entrapment efficiency, and H2S release profile. A Main Effects Screening (MES) and a Response Surface Design (RSD) model-based Box-Behnken Design (BBD) was developed to establish the relationship between critical process parameters (CPPs) and critical quality attributes (CQAs) qualitatively and quantitatively. The MES model identified polymer to drug ratio and dispersion medium quantity as significant CPPs among others, while the RSD model established their quantitative relationship. Finally, the target product performance was validated by comparing predicted and experimental outcomes. The QbD approach helped in achieving overall desired microparticle characteristics with fewer trials and provided a mathematical relationship between the CPPs and the CQAs useful for further manipulation and optimization of release profile up to at least 30 days.

Enhanced ophthalmic bioavailability and stability of atropine sulfate via sustained release particles using polystyrene sulfonate resin.

Atropine sulfate (ATS) eye drops at low concentrations constitute a limited selection for myopia treatment, with challenges such as low ophthalmic bioavailability and inadequate stability. This study proposes a novel strategy by synthesizing ophthalmic sodium polystyrene sulfonate resin (SPSR) characterized by a spherical shape and uniform size for cationic exchange with ATS. The formulation of ATS@SPSR suspension eye drops incorporates xanthan gum and hydroxypropyl methylcellulose (HPMC) as suspending agents. In vitro studies demonstrated that ATS@SPSR suspension eye drops exhibited sustained release characteristics, and tropic acid, its degradation product, remained undetected for 30 days at 40 °C. The ATS levels in the tear fluids and aqueous humor of New Zealand rabbits indicated a significant increase in mean residence time (MRT) and area under the drug concentration-time curve (AUC0-12h) for ATS@SPSR suspension eye drops compared to conventional ATS eye drops. Moreover, safety assessment confirmed the non-irritating nature of ATS@SPSR suspension eye drops in rabbit eyes. In conclusion, the cation-responsive sustained-release ATS@SPSR suspension eye drops enhanced the bioavailability and stability of ATS, offering a promising avenue for myopia treatment.

Pulmonary delivery of icariin-phospholipid complex prolongs lung retention and improves therapeutic efficacy in mice with acute lung injury/ARDS.

Icariin has been shown the promising therapeutic potential to treat inflammatory airway diseases, yet its poor lung distribution and retention restrict the clinical applications. To this end, this work aimed to prepare an icariin-phospholipid complex (IPC) formulation for sustained nebulization delivery that enabled excellent inhalability, improved lung exposure and prolonged duration of action. Icariin was found to react with soybean phospholipid to form supramolecular IPC, which was able to self-assemble into nanoparticle suspension. The suspension was stable during steam sterilization and nebulization processes, and its aerosols generated by a commercial nebulizer exhibited excellent aerodynamic properties and delivery efficiency. In vitro studies showed that the formation of complex sustained drug release, enhanced lung affinity and slowed lung clearance. The drug distribution in lung epithelial lining fluid (ELF) also demonstrated in vivo sustained release after intratracheal administration to mice. In addition, compared to free icariin, IPC improved the drug exposure to lung tissues and immune cells in the ELF by 4.61-fold and 39.5-fold, respectively. This resulted in improved and prolonged local anti-inflammatory effects up to 24 h in mice with lipopolysaccharide (LPS)-induced acute lung injury. Moreover, IPC improved survival rate of mice with acute respiratory distress syndrome (ARDS). Overall, the present phospholipid complex represented a promising formulation of icariin for the treatment of acute lung injury/ARDS by nebulization delivery.

Characterization and in vitro calcium release of the novel calcium-loaded complexes using Antarctic krill protein and pectin: Effect of different blending sequences.

Food-grade biopolymer-based complexes are of particular interest in the field of biologic ingredient delivery owing to unique controlled-release properties. Herein, three calcium-loaded complexes using Antarctic krill protein (P) and pectin (HMP) with different blending sequences were designed, named P + Ca + HMP, P + HMP + Ca and HMP + Ca + P, respectively. The calcium-loaded capacity, structural properties, and in vitro gastrointestinal calcium release of the complexes were investigated. The results demonstrated that the calcium binding rate and content of the P + Ca + HMP complex were the highest, reaching to 90.3 % and 39.0 mg/g, respectively. Particularly, the P + Ca + HMP complex exhibited a more stable fruit tree-like structure. Furthermore, the structural analysis confirmed that the primary interaction forces involved hydrogen bond, electrostatic, hydrophobic and ionic bond interaction. Ultimately, the P + Ca + HMP complex demonstrated superior calcium delivery. In conclusion, a novel calcium delivery system was successfully developed based on optimized the self-assembly sequence, which held significant importance in promoting the high-value utilization of Antarctic krill protein and enhancing the in vitro bioaccessibility of calcium.

Dual-functional lignocellulosic mulch as agricultural plastic alternative for sustained-release of photosensitive pesticide and immobilizing heavy metal ions.

The extensive utilization of non-biodegradable plastic agricultural mulch in the past few decades has resulted in severe environmental pollution and a decline in soil fertility. The present study involves the fabrication of environmentally friendly paper-based mulch with dual functionality, incorporating agrochemicals and heavy metal ligands, through a sustainable papermaking/coating technique. The functional paper-based mulch consists of a cellulose fiber web incorporated with Emamectin Benzoate (EB)@ Aminated sodium lignosulfonate (ASL). The spherical microcapsules loaded with the pesticide EB exhibited an optimal core-shell structure for enhanced protection and controlled release of the photosensitizer EB (Sustained release >75 % in 50 h). Meanwhile, the ASL, enriched with metal chelating groups (-COOH, -OH, and -NH2, etc.), served as a stabilizing agent for heavy metal ions, enhancing soil remediation efficiency. The performance of paper-based mulch was enhanced by the application of a hydrophobic layer composed of natural chitosan/carnauba wax, resulting in exceptional characteristics such as superior tensile strength, hydrophobicity, heat insulation, moisture retention, as well as compostability and biodegradability (biodegradation >80 % after 70 days). This study developed a revolutionary lignocellulosic eco-friendly mulch that enables controlled agrochemical release and soil heavy metal remediation, leading to a superior substitute to conventional and non-biodegradable plastic mulch used in agriculture.