Effect of Surface Topography on the Primary Stability of Miniscrew Implants in Orthodontics-A Systematic Review and Meta-Analysis.

This present study has the purpose of determining how surface topography of implants affects the initial stability of miniscrew implants (MSIs). Electronic databases like PubMed Central, Scopus, Web of Science, Embase, and Cochrane Library, as well as reference lists, were thoroughly searched up until September 2022. Clinical trials involving individuals who got anchorage through mini-implants, along with information on categories of mini-implants dimension, shape, thread design, and insertion site, were required as part of the eligibility criteria. Primary and secondary stability were also assessed. We carried out selection process for the study, extraction of data, quality assessment, and a meta-analysis. The qualitative synthesis included 10 papers: three randomized, four prospective, and four retrospective clinical investigations. The results of this meta-analysis demonstrate that the clinical state of MIs is controlled by their geometrical surface qualities, which are also influenced by their shape and thread design. According to the evidence this meta-analysis produced, this circumstance exists. The duration of the follow-up period and MI success rates did not correlate with one another.

Mechanical stability of orthodontic miniscrew depends on a thread shape.

Background/purpose: Primary stability of orthodontic miniscrew system is of great importance in maintaining stable anchorage during a treatment period. Thus, this study aimed to examine whether the thread shape of orthodontic miniscrew had an effect on its mechanical stability in bone. Materials and methods: Three different types of miniscrews (type A and B with a regular thread shape; type C with a novel thread shape) were placed in artificial bone block with different artificial cortical bone thickness of 1.5, 2.0 and 3.0 mm. Values of maximum insertion torque (MIT), removal torque (RT), torque ratio (TR), screw mobility, static stiffness (K), dynamic stiffness (K∗) and energy dissipation (tan Î´) ability were assessed for each miniscrew system. Results: The MIT, RT, TR and K of type C miniscrew were significantly greater than those of type A and B miniscrews when the miniscrews were placed in the thinner artificial bone. Furthermore, the TR value of type C miniscrew was more than 1, indicating the MRT value was larger than the MIT value in the novel miniscrew. The values of K∗ and tan Î´ were almost similar among the three types of miniscrews. Conclusion: The miniscrew with a novel thread shape showed a higher initial stability compared to those with a regular thread shape. Thus, in order to obtain a sufficient initial stability, it is important to select the type of screw thread that is appropriate for the thickness of the cortical bone.

Collagen Fibres Orientation in the Bone Matrix around Dental Implants: Does the Implant's Thread Design Play a Role?

The aim of this study was to analyse the influence of different thread shapes of titanium dental implant on the bone collagen fibre orientation (BCFO) around loaded implants. Twenty titanium dental implants, divided for thread shapes in six groups (A-F) were analysed in the present study. All implants were immediately loaded and left in function for 6 months before retrieval. The parameters evaluated under scanning electron microscope were the thread width, thread depth, top radius of curvature, flank angle, and the inter-thread straight section. Two undecalcified histological sections were prepared from each implant. Birefringence analysis using circularly polarized light microscopy was used to quantitively measure BCFO. For groups A-F, respectively, transverse BCFO was 32.7%, 24.1%, 22.3%, 18.2%, 32.4%, and 21.2%, longitudinal BCFO was 28.2%, 14.5%, 44.9%, 33.1%, 37.7%, and 40.2%. The percentage differences between transverse and longitudinal orientation were 4.50% (A), 9.60% (B), -22.60% (C), -14.90% (D), -5.30% (E), and -19.00% (F). Following loading, the amount of transverse and longitudinal BCFO were significantly influenced by the thread shape. The greater flank angles and narrower inter-thread sections of the "V" shaped and "concave" shaped implant threads of groups A and B, respectively, promoted the predominance of transverse BCFO, compared to groups C-F (p < 0.05). A narrow inter-thread straight section promotes transverse BCFO, as do "V" shaped and "concave" shaped threads, which can thus be considered desirable design for implant threads.

Effects of Different Implant Design Parameters on Mandibular Tooth Implantation / 医用生物力学

Objective To establish the implant-mandible model with different design parameters, observe stress distributions on the implant and surrounding bone, and analyze the influence of different design parameters on dental implant of the mandible. Methods Eight implant models were designed based on structural characteristic parameters (implant diameter, thread depth, height of abutment through gingiva, thread shape), and assembly of the mandibular model was performed respectively. The models were applied with static 150 N vertical and oblique 45° loads, so as to analyze peak von Mises stress of the implant and bone tissues and explore the structural parameter variables of implant most sensitive to peak von Mises stress. Results The peak stress of the mandible was larger under inclined load than that under vertical load. Implant diameter was the key factor affecting the peak von Mises stress of cortical bone, while thread depth was the key factor affecting the peak von Mises stress of cancellous bone. The peak von Mises stress was also affected by the height of abutment through gingiva, but the effect was not as significant as thread depth and implant diameter. Thread shape had little effect on the peak von Mises stress of the mandible. Conclusions Different implant design parameters can affect the peak stress of different tissues of the mandible, so it is necessary to carefully consider the selection of implant parameters for personalized implants. This study can provide theoretical guidance for structural parameter design of oral implants and provide references for accurate prediction of oral implants.

Evaluation of stability of three different mini-implants, based on thread shape factor and numerical analysis of stress around mini-implants with different insertion angle, with relation to en-masse retraction force

ABSTRACT Objectives: Assess the stability of three different mini-implants, based on thread shape factor (TSF), and evaluate stresses at the mini-implant site and surrounding cortical bone on application of retraction force, at two different insertion angles. Methods: Mini-implants of three different diameters (M1 - Orthoimplant, 1.8mm), (M2 - Tomas, 1.6mm) and (M3 - Vector TAS, 1.4mm) and length of 8mm were used. Using scanning electronic microscopy, the mean thread depth, pitch and relationship between the two (TSF) were calculated. The mini-implants were loaded into a synthetic bone block and the pull-out strength was tested. One way ANOVA and Tukey post-hoc tests were used to compare the pull-out strength of mini-implants. P values < 0.05 were considered statistically significant. Finite element models (FEM) were constructed with insertion angulation at 90° and 60°, with retraction force of 150 g. The results were analyzed using ANSYS software. Results: Statistically significant difference was found among all the three mini-implants for thread depth and pitch (< 0.001). Statistically significant higher pull-out force value was seen for Orthoimplant. The stress distribution level in mini-implant and surrounding bone was observed to be smaller for Orthoimplant. Conclusion: Orthoimplant mini-implants have more favorable geometric characteristics among the three types, and less stress with 90°angulation.

RESUMO Objetivos: Avaliar a estabilidade de três diferentes tipos de mini-implantes, com base no fator formato da rosca (thread shape factor, TSF), e avaliar a tensão no local de inserção e no osso cortical ao redor dos mini-implantes inseridos com dois ângulos diferentes, durante a aplicação de força para retração. Métodos: Foram usados três diferentes diâmetros de mini-implantes, sendo eles 1,8 mm (M1, ORTHO Implant), 1,6 mm (M2, Tomas) e 1,4 mm (M3, Vector TAS), todos com comprimento de 8 mm. Por meio da microscopia eletrônica de varredura, foram calculados a profundidade da rosca, o passo da rosca (distância entre os filetes da rosca) e a relação entre os dois (TSF). Para realização do teste de tração (pull-out), os mini-implantes foram inseridos em um bloco de osso sintético. Os testes ANOVA de uma via e post-hoc de Tukey foram usados para comparar as forças de resistência à tração dos mini-implantes, considerando-se estatisticamente significativos valores de p< 0,05. Modelos de elementos finitos (MEF) foram gerados com ângulos de inserção dos mini-implantes a 90° e 60°, com força de retração em 150g. Os resultados foram analisados usando-se o software ANSYS. Resultados: Diferenças estatisticamente significativas foram encontradas entre os três mini-implantes quanto à profundidade da rosca e o passo da rosca (p< 0,001). O ORTHO Implant apresentou a maior força de resistência à tração, com significância estatística. O nível de distribuição das tensões no mini-implante e no osso circundante também foi menor para o ORTHO Implant. Resultados: Entre os diferentes tipos de mini-implantes analisados, o ORTHO Implant apresentou as características geométricas mais favoráveis e a menor tensão com o ângulo de inserção de 90°.

Thread shape affects the stress distribution of torque force on miniscrews: a finite element analysis.

This study aimed to investigate the effect of miniscrews thread shape on the stress distribution receiving a torque load. Seven thread shapes (S,V1,V2,B1,B2,R1,R2) models were constructed and a 6 Nmm-torque load was applied. The order of maximum equivalent stress (EQV) value was V1 > V2 > B1 > R1 > R2 > B2 > S. The order of maximum displacement of miniscrew (Max DM) value was S > B2 > R1 = V1 > B1 > V2 > R2. Model R2 may be the most appropriate thread shape affording a torque force.

Biomechanical Properties of Implants with Different Thread Shapes and Depths in Dental Immediate Implantation / 医用生物力学

Objective To analyze stress distributions of alveolar bone around implants with different types of implant thread shapes and thread depths during dental immediate implantation, so as to provide references for the design and selection of implants. Methods The simplified model of mandible bone block, implants and mandibular molar were established by Geomagic Studio, SolidWorks and ANSYS Workbench, and vertical and oblique loads were applied on this model, respectively. Stress distributions on implants with different thread shape and thread depth as well as alveolar bone around implants were calculated. Results Under vertical loading, the peak stresses of implants, cortical bone and cancellous bone were in the range of 120.51-129.63 MPa, 9.94-13.25 MPa and 3.92-8.01 MPa, respectively. And the stress of cortical bone around V-shaped, rectangular, buttress or reverse buttress implant remained stable in the range of 0.40-0.45 mm thread depth. Under oblique loading, the peak stresses of implants, cortical bone and cancellous bone were in the range of 220.23-286.51 MPa, 33.39-45.08 MPa, 4.96-12.5 MPa, respectively. Among the models, V-shaped, buttress, reverse buttress implant with 0.45 mm thread depth showed the minimum stress. Conclusions The V-shaped, buttress or reverse buttress implant with a thread depth of 0.45 mm, or the rectangular implant with a thread depth of 0.40 mm had better biomechanical properties.