The association of severely worn dentition resulting from betel nut chewing with temporomandibular disorders: a cross-sectional study.

BACKGROUND: Most studies support parafunctions play an important role in temporomandibular disorders (TMD), whereas the association between tooth wear and TMD remains controversial. Betel nut chewing as a parafunction is popular in South and Southeast Asia. We therefore investigated the association of severely worn dentition resulting from betel nut chewing with TMD. METHODS: A cross-sectional analysis of 408 control participants (male: 380, female: 28, 43.62 ± 9.54 years) and 408 participants with betel nut chewing related severely worn dentition (male: 380, female: 28, 43.73 ± 8.93 years) who received dental and TMD checkup according to Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) in Health Management Center, Xiangya Hospital was performed. Betel nut chewing related severely worn dentition meant all the natural teeth had moderate to severe tooth wear [Tooth Wear Index (TWI) ≥ 2)] including ≥ 2 severe wear teeth (TWI ≥ 3) due to betel nut chewing. Multivariable logistic regression analysis was used. RESULTS: After adjusting for age, gender, betel nut chewing related severely worn dentition, oral submucosal fibrosis, number of missing teeth, number of dental quadrants with missing teeth, visible third molar and orthodontic history, variables of age, gender and betel nut chewing related severely worn dentition were significant for overall TMD. Multivariable analysis showed betel nut chewing related severely worn dentition was significantly associated with intra-articular TMD [odds ratio and 95% confidence intervals: 1.689 (1.271-2.244), P = 0.001] in a betel nut chewing dose-dependent manner. CONCLUSION: Betel nut chewing related severely worn dentition was associated with intra-articular TMD.

Survival and debonding resistance of posterior cantilever resin-bonded fixed dental prostheses for moderately and severely worn dentition during thermomechanical loading.

OBJECTIVES: The purpose of this study was to investigate the survival rate, the debonding resistance, and the failure modes of different occlusal veneer designs when used as a retainer for posterior cantilever, resin-bonded fixed dental prostheses (RBFDPs) at two tooth wear levels. METHODS: Four test groups were assigned: two groups with occlusal-proximal preparation (PT1 and PT2 for grade 2 and 3 wear), and two groups for occlusal-proximal and lingual preparation (PLT1 and PLT2 for grade 2 and 3 wear) Monolithic zirconia ceramic (3Y-TZP) RBFDPs were luted with an adhesive bonding system (Panavia V5). The specimens underwent a chewing simulation for 1.200.000 cycles with a load of 5 kg and thermocycling for 7500 cycles between 5 °C and 55 °C. The surviving restorations were debonded under quasi-static conditions. The results were analyzed with ANOVA. RESULTS: The specimens exhibited a 100 % survival rate after thermomechanical fatigue loading. The debonding resistance was statistically significant higher for group PLT1 than for group PT1 (P = 0.004), and higher for group PT2 than group PT1 (P ≤ 0.001). However, the debonding resistance showed no statistically significant difference between groups PT2 and PLT2 (P = 0.343), and groups PLT1 and PLT2 (P = 0.222). Groups PT1 and PT2 showed favorable failure modes in 62.5 % and 0.00 % of the specimens, respectively. While groups PLT1 and PLT2 presented 25 % favorable failure modes. SIGNIFICANCE: Occlusal veneers showed promising results as a retainer for cantilever RBFDPs. The lingual extension might increase debonding resistance. Nevertheless, conservative designs with lingual and proximal bevels are to be recommended, irrespective of the level of tooth wear.

Full mouth oral rehabilitation of a severely worn dentition based on a fully digital workflow.

OBJECTIVE: To demonstrate the use of a complete digital workflow for a full mouth rehabilitation in a severely worn dentition. CLINICAL CONSIDERATIONS: The present case report successfully rehabilitated a full-mouth case of a severely worn dentition based on the use of digital technologies, making the diagnosis and treatment process faster, accurate and less expensive. A long-lasting esthetic and functional result are showed after 30-months follow up. CONCLUSIONS: An appropriate knowledge on dental erosion and oral rehabilitation, combined with a digital dentistry approach could lead the clinician to deliver a fast, accurate and predictable noninvasive restorative treatment in cases like the one described. CLINICAL SIGNIFICANCE: Bruxism-based severely worn dentition is being found more often in population. In this situation, a detailed diagnosis and tailored treatment are mandatory to obtain a predictable treatment outcome. In this sense, the development of adhesive dentistry, new restorative materials and the incorporation of digital technologies can create a predictable synergy to rehabilitate these types of patients with a modern and less invasive approach.

[Several important issues concerning occlusal reconstruction].

Occlusal reconstruction aims to restore the compromised dentition and rehabilitate its function; which is demanding and challenging, even to the well experienced prosthodontists. Analyzing the sophisticate clinical information gives fundamental validity to the subsequent treatment planning. In the whole process, the applied workflow should ensure the transmission of diagnostic information without compromise or error. Certain procedures predetermine the clinical outcome, and they should be given due attention. In this review, the key considerations, including analyzing the pathogenesis for the worn dentition, were briefly addressed to better understand the occlusal reconstruction.

Several important issues concerning occlusal reconstruction / 华西口腔医学杂志

Occlusal reconstruction aims to restore the compromised dentition and rehabilitate its function; which is demanding and challenging, even to the well experienced prosthodontists. Analyzing the sophisticate clinical information gives fundamental validity to the subsequent treatment planning. In the whole process, the applied workflow should ensure the transmission of diagnostic information without compromise or error. Certain procedures predetermine the clinical outcome, and they should be given due attention. In this review, the key considerations, including analyzing the pathogenesis for the worn dentition, were briefly addressed to better understand the occlusal reconstruction.

Minimally invasive rehabilitation of the worn dentition: a case report utilising adhesive additive techniques and digital technologies.

The management of the worn dentition presents an increasing challenge that is encountered more frequently in daily dental practice. The consequences of tooth wear tend to be multifactorial and while they may initially only involve the loss of surface enamel it can progressively lead to significant destruction of the dentition. This paper discusses the management of a tooth wear case where a significant amount of tooth structure has been lost from both the anterior and posterior teeth. Protocols for assessment, treatment planning and restorative management of the tooth wear case are presented demonstrating the use of adhesive additive techniques and digital technologies to achieve functional and aesthetic rehabilitation of the dentition.

Full mouth rehabilitation in a patient with reduced vertical dimension due to numerous tooth loss and excessie worn dentition: A case report / 대한치과보철학회지

As digital dentistry technology is being developed, it is being used in various ways. This case covers how digital dentistry technology is being applied on the treatment of patients with loss of vertical dimension due to worn dentition and multiple loss of teeth. The loss of vertical dimension was carefully assessed and recovered, and implants were placed with surgical guides, designed considering the final restoration. The movement of the mandibular was measured with the electronic instrument for recording mandibular movement. Wax-up process was done with Naturgemäße Aufwachs-Technik (N.A.T.) and Natural functional reconstruction (N.F.R.). It was scanned, and the provisional restoration was fabricated using Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM) technology, and the adjustment process was done at the clinic to meet with the satisfaction both functionally and esthetically, and then, using double scanning and CAD/CAM technology, it was carried out as a final restoration. As a result, the patient obtained satisfying results, utilizing the benefits of digital dentistry technology and traditional methods.

Complete mouth rehabilitation with vertical dimension increase in patient with extremely worn dentition / 대한치과보철학회지

Generalized severely worn dentition causes occlusal disharmony, esthetic problems, and temporomandibular joint disorders. In order to solve these problems, it is necessary to make a precise analysis of vertical dimension and treatment plans considering it. This case report demonstrates the complete mouth rehabilitation of a 58-year-old male patient with a lot of worn teeth by increasing vertical dimension. Provisional restorations were cemented and after 4 months of evaluation for patient's compliance, permanent prostheses were fabricated. With these treatments, functionally and esthetically satisfactory results were obtained.

Full-mouth rehabilitation with vertical dimension increase and computer tomography guided implant surgery in patient with excessive worn dentition and multiple loss of tooth / 대한치과보철학회지

Excessive wear causes many complications when untreated, so that accurate diagnosis, analysis and predictive treatment plan should be made, and through evaluation of vertical dimension and stepwise treatment, a stable inter-arch relationship can be set. For the long-term success of implant treatment, ideal position and angle of implant is important, and its importance increases especially in multiple implant cases. Therefore, thorough diagnosis and planning, accurate surgery and prosthodontic procedures are significant. In this case, a 68-year-old male patient with a loss of vertical dimension due to multiple tooth loss and overall tooth wear was planned with systematic analyses from the pre-treatment stage to rehabilitate vertical dimension. Full-mouth fixed rehabilitation with computer tomography guided implant surgery was performed to the newly set vertical dimension and attained satisfactory outcomes both functionally and esthetically.

Clinical protocol with digital cad/cam chairside workflow for the rehabilitation of severely worn dentition patients.

OBJECTIVES: The purpose of this paper is to investigate the effectiveness and to describe a clinical protocol with digital CAD CAM chairside workflow for the rehabilitation of severely compromised and worn dentitions. METHODS: This article reports 4 consecutive cases, where a clinical digital chairside workflow is used for the rehabilitation of severely compromised and worn dentitions. Advantages and limitations of this method compared with the traditional prosthetic protocol are also described and discussed. RESULTS: With all four patients treated with this protocol, we obtained a good aesthetic and functional result, improvement in chewing function, loss of cold sensitivity, better preservation of most of the left hard tissue and a good level of satisfaction. In a two-year follow-up, all patients also maintained the condition obtained with prosthetic chairside rehabilitation, resulting in almost 100% cumulative survival rate. CONCLUSION: Within the limitations of this study, we can assert that the aforementioned restorative treatment with digital CAD/CAM chairside workflow represents a valid alternative to rehabilitate this kind of patients, because it is a safe, predictable and personalized procedure but also it seems easier, faster and cheaper than traditional protocols.

Full mouth rehabilitation using zirconia crown in severe worn dentition: a case report

The progressive attrition of teeth is a normal process by aging. However, excessive tooth wear with decreased vertical dimension of occlusion and collapse of occlusal plane may cause pathologic pulpal condition, occlusal disharmony and functional disorders. In this case, a patient with severely worn dentition was treated. Diagnostic wax-up was performed at the increased vertical dimension. After evaluation of provisional restorations for 12 weeks, final restorations were fabricated with zirconia crown and routine clinical assessments were made. Esthetically and functionally satisfactory results were obtained.

Full mouth rehabilitation in patient with loss of vertical dimension and deep bite due to worn dentition / 대한치과보철학회지

Gradual occlusal attrition is a normal process of aging. However, severe attrition causes pathogenic pulp, occlusal disharmony, functional disorder and esthetic problems. Alteration of vertical dimension should be considered for space regaining for tooth restoration, esthetic improvement or correction of occlusal relationship. Vertical dimension should be determined within the range of minimal invasive process satisfying patient's esthetic requirements and operator's functional goal. And patient's adaptation to newly determined vertical dimension should be assessed simultaneously. Deep overbite is not a simple problem of overbite, instead it is an usually complicated problem with anterior-posterior occlusal relationship. Considering these facts, appropriate restoration of edentulous part as well as improvement of anterior-posterior relationship should be performed to solve this fundamental problems. In this study, a 67 year-old male patient with many worn teeth and loss of posterior teeth was treated with removable partial denture at edentulous mandibular area to increase vertical dimension and fixed prostheses at dentulous maxillary and mandibular area. With these treatments, we attained a satisfactory result in functional and esthetic aspects as a report case.

Overdenture treatment in patient with severely worn dentition: a case report

Overdenture is one of the methods of patients with severely worn dentition. Remaining natural teeth help preserve alveolar bone and proprioception and provide rigid support. Also, overdenture distributes the concentrated stress applied to the abutment tooth and denture supporting tissues. There is an advantage that it can provide long-term stability to denture. In this case, the patient with only a few teeth due to severe wear and caries was satisfied with good function and favorable esthetics by using overdenture.

A treatment protocol for restoring occlusal vertical dimension using an overlay removable partial denture as an alternative to extensive fixed restorations: a clinical report.

Treatment options for patients with severe attrition resulting in reduced occlusal vertical dimension are often limited to fixed prosthesis to reestablish proper occlusal vertical dimension and functional occlusion. In some cases such as when there are limited finances, minimal esthetic concerns, and medical considerations fixed prosthesis may not be the ideal treatment option. Overlay removable partial dentures (ORPDs) can be used as a provisional or interim prosthesis as well as permanent prosthesis in these cases. While ORPDs can provide a reversible and relatively inexpensive treatment for patients with a significantly compromised dental status, there is not much scientific evidence in the literature on ORPDs. Most studies published on ORPDs to date are primarily reviews and clinical reports. In this article, literatures on ORPDs are summarized and a patient treated with interim and permanent ORPDs is presented. This article reviews previously published literatures on the use of ORPDs. Indications, advantages and disadvantages are discussed. Treatment protocol with an example of the prosthodontic treatment of a patient with severely worn dentition with an interim ORPD and later a permanent ORPD are discussed in details.