Long-term efficiency of cataract surgery with hydrophilic acrylic Ioflex intraocular lens.

OBJECTIVE: To evaluate the efficiency of long-term cataract surgery using low-cost intraocular lens implantation in community campaigns. METHODS: Fifty-eight randomly selected patients were evaluated four years after phacoemulsification and Ioflex intraocular lens implantation. Causes of low visual acuity related to the intraocular lens were evaluated, and treatment costs were calculated. RESULTS: The mean age of patients was 72±10.2 years. Four years after surgery, 25 eyes (43.0%) had decreased visual acuity related to the intraocular lens: posterior capsule opacification was noted in 24 eyes (41.3%), and intraocular lens opacification was noted in one eye (1.7%). The total cost of the post-surgical complication treatments represented 6.3% of the initial budget of the entire surgical patient group. CONCLUSIONS: The efficiency of cataract surgery with low-cost Ioflex intraocular lens implantation was significantly reduced in a long-term follow-up study because postoperative complications related to intraocular lenses emerged at higher rates than when the gold-standard treatment was used.

Long-term efficiency of cataract surgery with hydrophilic acrylic Ioflex intraocular lens

OBJECTIVE: To evaluate the efficiency of long-term cataract surgery using low-cost intraocular lens implantation in community campaigns. METHODS: Fifty-eight randomly selected patients were evaluated four years after phacoemulsification and Ioflex intraocular lens implantation. Causes of low visual acuity related to the intraocular lens were evaluated, and treatment costs were calculated. RESULTS: The mean age of patients was 72±10.2 years. Four years after surgery, 25 eyes (43.0%) had decreased visual acuity related to the intraocular lens: posterior capsule opacification was noted in 24 eyes (41.3%), and intraocular lens opacification was noted in one eye (1.7%). The total cost of the post-surgical complication treatments represented 6.3% of the initial budget of the entire surgical patient group. CONCLUSIONS: The efficiency of cataract surgery with low-cost Ioflex intraocular lens implantation was significantly reduced in a long-term follow-up study because postoperative complications related to intraocular lenses emerged at higher rates than when the gold-standard treatment was used.

A cost-effective treatment for severe generalized erosion and loss of vertical dimension of occlusion: laboratory-fabricated composite resin restorations.

This case report describes preventive and restorative treatment planning for a 56-year-old female patient with severe, chronic, poorly controlled gastroesophageal reflux disease and resulting loss of vertical dimension of occlusion. First, the demineralization process was controlled through collaboration with the patient's physician, and measures were taken to restore adequate stimulated salivary flow. Then, for financial reasons, indirect laboratory-fabricated composite resin restorations were adhesively bonded to replace lost tooth structure and reestablish the patient's collapsed vertical dimension. Indirect-laboratory fabricated restorations can be a cost-effective alternative to direct composite resin or all-ceramic restorations for the treatment of chronic severe erosion, but there are no long-term clinical reports in the current literature to support or contraindicate the use of indirect composites for this type of clinical application. Therefore, careful, long-term follow-up evaluations are planned for this patient.

Evaluation of several flocculants for flocculating microalgae.

Flocculation of microalgae with chitosan, polyacrylamide, Al2(SO4)3, NaOH and HNO3 was evaluated. Their flocculation efficiencies and optimal dosages were discussed. The effects of the flocculants on cells viability were also investigated and the cells were found to be intact during the flocculation process. Moreover, the effects of flocculants on the extractions were evaluated. Lipid content after flocculants treatments showed no significant differences. Carbohydrate content was lower but protein content was higher after NaOH treatment than those after other treatments. Furthermore, the five flocculated media maintained approximate growth yields to that of the fresh medium in microalgal cultivation, indicating the five flocculated media could be recycled, thereby reducing the cost of biodiesel production from microalgae. Finally, economic comparison of the flocculants was made and the cost of using HNO3, including flocculating cells and recycling medium, was found to be the lowest.

A simplified approach for the rehabilitation of an auricular defect: a case report.

BACKGROUND AND AIM: Replacement of missing ear is a challenging task in which extensive array of materials and techniques have been employed. Materials such as silicones and methacrylate acrylic resins have been widely used for auricular prosthesis. This article describes a simplified procedure for fabricating resilient heat-cured acrylic resin auricular prosthesis, retained with a custom-made acrylic bar with ball attachments. CASE DESCRIPTION AND METHODS: A male patient was reported with right ear loss. A modified technique was preferred to fabricate ear prosthesis with resilient heat-cured acrylic resin in which heat-cured acrylic retentive bar was incorporated. FINDINGS AND OUTCOMES: Contrary to silicones, resilient heat-cured acrylic resin was more economical and compatible with acrylic retentive bar and resulted in a more long-lasting auricular prosthesis. CONCLUSION: Resilient heat-cured acrylic resin was proven to be a better alternative in terms of strength and durability. CLINICAL RELEVANCE: This article presents an economical and simplified approach for the fabrication of prosthesis for a missing ear.

Análise de custo-efetividade de métodos preventivos para superfície oclusal de acordo com o risco de cárie: resultados de um ensaio clínico controlado / Cost-effectiveness analysis of preventive methods for occlusal surface according to caries risk: results of a controlled clinical trial / Análisis del coste-efectividad de los métodos preventivos para una superficie oclusal según el riesgo de caries: resultados de un ensayo clínico controlado

Este estudo apresenta o resultado de uma avaliação de custo-efetividade conduzida ao longo de um ensaio clínico controlado para avaliar a efetividade do selamento com ionômero de vidro modificado por resina (Vitremer, 3M ESPE) e da aplicação de verniz fluoretado (Duraphat, Col-gate) em superfícies oclusais de primeiros molares permanentes, em crianças de 6 a 8 anos (N = 268), segundo o risco de cárie (alto risco; baixo risco). As crianças foram examinadas semestralmente, ao longo de 24 meses, pelo mesmo dentista calibrado, após alocação em seis grupos: controle alto risco e baixo risco (educação em saúde bucal trimestral); verniz alto risco e baixo risco (educação em saúde bucal trimestral + aplicação semestral de verniz); e selante alto risco e baixo risco (educação em saúde bucal trimestral + única aplicação do selante). A análise mostrou que o selamento de primeiros molares permanentes em crianças de alto risco apresentou razão de C/E de R$ 225,21(US$ 119,80) por superfície oclusal salva, e razão incremental de C/E de R$ 203,71(US$ 108,36) por superfície oclusal adicional salva. Conclui-se que uma única aplicação de selante, em escolares de alto risco, foi a intervenção mais custo-efetiva.

This study presents the results of a cost-effectiveness analysis in a controlled clinical trial on the effectiveness of a modified glass ionomer resin sealant ( Vitremer, 3M ESPE) and the application of fluoride varnish (Duraphat, Colgate) on occlusal surfaces of first permanent molars in children 6-8 years of age (N = 268), according to caries risk (high versus low). Children were examined semiannually by the same calibrated dentist for 24 months after allocation in six groups: high and low risk controls (oral health education every three months); high and low risk with varnish (oral health education every three months + varnish biannually); and high and low risk with sealant (oral health education every three months + a single application of sealant). Economic analysis showed that sealing permanent first molars of high-risk schoolchildren showed a C/E ratio of US$ 119.80 per saved occlusal surface and an incremental C/E ratio of US$ 108.36 per additional saved occlusal surface. The study concluded that sealing permanent first molars of high-risk schoolchildren was the most cost-effective intervention.

En este estudio se presentan los resultados de una evaluación de costo-efectividad (C/E) durante un ensayo clínico controlado para evaluar la efectividad de la obturación con ionómero de vidrio modificado con resina (Vitremer, 3M ESPE) y la aplicación de barniz de flúor (Duraphat, Colgate) en las superficies oclusales de los primeros molares permanentes, para niños de 6-8 años (N = 268) de edad, de acuerdo con el riesgo de caries (alto riesgo-bajo riesgo). Los niños fueron examinados cada seis meses por el mismo dentista calibrado, durante 24 meses, después de haberle sido asignados seis grupos: control alto riesgo y bajo riesgo (educación de salud bucal cada tres meses); barniz alto riesgo y bajo riesgo (educación de salud bucal cada tres meses + barniz semestralmente); obturación alto riesgo y bajo riesgo (educación de salud bucal cada tres meses + una sola aplicación de ionómero de vidrio). El análisis económico mostró que la obturación de los primeros molares permanentes de escolares de alto riesgo presenta una relación C/E de US$ 119.80 de ahorro por superficie oclusal y una ratio C/E incremental de US$ 108.36 de ahorro adicional por superficie oclusal.

[Cost-effectiveness analysis of preventive methods for occlusal surface according to caries risk: results of a controlled clinical trial]. / Análise de custo-efetividade de métodos preventivos para superfície oclusal de acordo com o risco de cárie: resultados de um ensaio clínico controlado.

This study presents the results of a cost-effectiveness analysis in a controlled clinical trial on the effectiveness of a modified glass ionomer resin sealant ( Vitremer, 3M ESPE) and the application of fluoride varnish (Duraphat, Colgate) on occlusal surfaces of first permanent molars in children 6-8 years of age (N = 268), according to caries risk (high versus low). Children were examined semiannually by the same calibrated dentist for 24 months after allocation in six groups: high and low risk controls (oral health education every three months); high and low risk with varnish (oral health education every three months + varnish biannually); and high and low risk with sealant (oral health education every three months + a single application of sealant). Economic analysis showed that sealing permanent first molars of high-risk schoolchildren showed a C/E ratio of US$ 119.80 per saved occlusal surface and an incremental C/E ratio of US$ 108.36 per additional saved occlusal surface. The study concluded that sealing permanent first molars of high-risk schoolchildren was the most cost-effective intervention.

eRME--rapid maxillary expansion in the economic way.

AIM AND OBJECTIVES: Rapid Maxillary Expansion constitutes a routine clinical procedure in orthodontics, involving separation of mid-palatine suture which is usually done with help of the Hyrax screw. However, because of its high cost, the use has been limited, especially in institutions. So, the purpose of this study was to construct an economical device which can expand the maxillary arch in growing patients. MATERIALS AND METHODS: Six patients having constricted maxilla and posterior skeletal crossbite were randomly selected from the Department of Orthodontics. A unique, easy and simple alternative device for expanding the maxillary arch called economic Rapid Maxillary Expander (eRME) has been fabricated at about one-tenth the cost of the conventional Hyrax. Pre- and post-treatment effects were statistically tested by using paired t-test at 0.05 level of significance. RESULTS AND CONCLUSION: The study results showed an average expansion in canine, premolar and molar regions of 4.4 mm, 6.8 mm and 9.4 mm, respectively, having significant difference pre-and post-treatment. Thus, it shows that maxillary expansion is efficiently possible with the application of this newly constructed device named eRME. This appliance also acts as a fixed retainer to avoid relapse, hence negating the need for a separate retainer.

Acrylic partial dentures--interim or permanent prostheses?

An acrylic partial denture (APD) is one option for replacing missing teeth and is also the most cost effective treatment option. Dentists are faced with the demand for replacing missing teeth from patients with limited financial resources; therefore the replacement of missingteeth with an APD is a common occurrence. One of the disadvantages of APD's is its poor strength. Dentists and dental technicians tend to design and construct acrylic partial dentures with little or no tooth support. This can have a detrimental effect on the surrounding hard as well as soft tissue. This article argues that APD's can be considered as a permanent prosthesis, provided that proper patient selection, education and the principles of partial denture design are adhered to.

Costs and prices of single dental fillings in Europe: a micro-costing study.

Dental fillings represent an established procedure to treat tooth decay. The present paper provides a cost comparison of dental filling procedures across nine European countries. More specifically, the paper aims to estimate the costs and prices (i.e. reimbursement fees) of a single dental filling procedure in an approximately 12-year-old child with a toothache in a lower molar who presents at a dental practice, as described in a case vignette. Both amalgam and composite fillings were examined. Total costs were determined by identifying resource use and unit costs for the following cost components: diagnostic procedures, labour, materials, drugs, and overheads. Altogether, 49 practices provided data for the cost calculations. Mean total costs per country varied considerably, ranging from 8 euros to 156 euros. Labour costs were the most important cost driver in all practices, comprising 58% of total costs. Overhead costs were the second-most important cost component in the majority of countries. Actual cost differences across practices within countries were relatively small. Cost variations between countries were primarily due to differences in unit costs, especially for labour and overheads, and only to a lesser extent to differences in resource use. Finally, cost estimates for a single dental filling procedure based on reimbursement fees led to an underestimation of the total costs by approximately 50%.

Cost of composite and glass ionomer class II molar restorations and theoretical analyses of cost per year of function at public dental services in Sweden.

The aim was to evaluate the cost of direct composite and glass ionomer class II molar restorations, and the theoretical cost per year of function, at Public Dental Services (PDS) in Sweden, years 2000 and 2005. Costs for patients, Social Insurance Offices (SI; Försäkringskassan), and total cost, were calculated based on fee schedules from all PDS in Sweden. Theoretical cost per year calculations were based on the median survival times (MST) of failed direct composite and glass ionomer class II molar restorations, derived from a set of clinical studies conducted in Nordic general practices. Due to lack of national statistics from SI, the number of direct restorations including more than one surface, made in adults, in general dentistry at PDS in the county of Halland were studied. From the year 2000 to year 2005, the total cost of composite class II molar restorations increased by 25%, whereas the total cost of glass ionomer restorations more than doubled. Theoretical calculations implied a higher cost per year of function for composite restorations in year 2000, whereas in year 2005, glass ionomer restorations had a higher cost per year of function. The cost of direct composite and glass ionomer class II molar restorations increased from year 2000 to 2005, at PDS in Sweden. In the context of planning public health care funding, theoretical models for cost prediction may prove useful.

Cost-effectiveness analysis of PMMA, silicone, or acrylic intra-ocular lenses in cataract surgery in four European countries.

PURPOSE: To compare the cost-effectiveness of different intra-ocular lens (IOL) materials (Hydrophobic acrylic, Polymethylmethacrylate (PMMA), Hydrophilic acrylic and Silicone) implanted after cataract surgery with reference to Nd:YAG laser capsulotomy and Nd:YAG-related complications in four European countries (France, Italy, Germany and Spain). SETTING: A retrospective review of 1,525 patients (eyes), aged 50 to 80 years, operated with phacoemulsification for cataract in 1996 or 1997 in 16 surgical centres (4 per country). METHODS: The study was conducted using a cost-effectiveness approach. Medical charts were reviewed to collect retrospective information during the 3-year period following cataract surgery in order to identify patients who underwent Nd:YAG laser capsulotomy post-operatively. Clinical data were combined with unit costs assessed by experts for Nd:YAG laser capsulotomy and their complications. A cost-effectiveness ratio (cost per patient without Nd:YAG laser capsulotomy intervention) was estimated in relation to each IOL material used in each of the four European countries. RESULTS: Hydrophobic acrylic, specifically Acrysof, was the most cost-effective IOL material in all the countries except Germany where it was second. PMMA had the best ratio in Germany, was second in Spain and only third in Italy and France. Silicone was second in France and ranked third in the other countries, while hydrophilic acrylic had the worst ratio overall in all countries. CONCLUSIONS: Cost-effectiveness ratios of hydrophobic acrylic (Acrysof) were better than those of other types of IOL materials used in most of the countries. Sensitivity analyses were performed to vary the base case analysis to demonstrate the economic importance of the assumptions. In all cases, hydrophobic acrylic IOL material was shown to be a highly cost-effective option.

Synthetic- and bio-polymer use for runoff water quality management in irrigated agriculture.

Low concentrations of synthetic- or bio-polymers in irrigation water can nearly eliminate sediment, N, ortho- and total-P, DOM, pesticides, micro-organisms, and weed seed from runoff. These environmentally safe polymers are employed in various sensitive uses including food processing, animal feeds, and potable water purification. The most common synthetic polymer is anionic, high purity polyacrylamide (PAM), which typically provides 70-90% contaminant elimination. Excellent results are achieved adding only 10 ppm PAM to irrigation water, applying 1-2 kg ha(-1) per irrigation, costing 4 dollars - 12 dollars kg(-1). Biopolymers are less effective. Using twice or higher concentrations, existing biopolymers are approximately 60% effective as PAM, at 2-3 times the cost. A half million ha of US irrigated land use PAM for erosion control and runoff protection. The practice is spreading rapidly in the US and worldwide. Interest in development of biopolymer surrogates for PAM is high. If the supply of cheap natural gas (raw material for PAM synthesis) diminishes, industries may seek alternative polymers. Also "green" perceptions and preferences favor biopolymers for certain applications.

Bond strengths of two dental bonding systems.

A new bonding system named Kevloc has been introduced. It is based on acrylization of the metal surface with the goal of preventing the occurrence of a marginal gap between the metal and the resin. The purpose of this investigation was to determine the values of the shear bond strength achieved using the Kevloc technique on Ag-Pd (Auropal SE) and Co-Cr (Basil S) alloys and to compare them with those obtained with the OVS technique. The shear bond strengths were measured with the Smitz-Schulmayer shear test in a universal testing machine for polymer materials. A microscope image analyzer was used to measure the thickness of bonding layers and to reveal the possible occurrence of the marginal gap with both techniques. No marginal gap was detected with either technique. Kevloc provided better results than OVS only in a group of specimens tested after polymerization. Immersion in water and thermocycling reduced the initially high bond strength values of Kevloc specimens, whereas the bond strength values of OVS specimens remained unchanged regardless of which aging treatment was used. Microscopic examination did not reveal the existence of the marginal gap for either bonding system. According to the results obtained, it can be concluded that the Kevloc bonding system does not provide better shearing bond strength than the OVS bonding system.

A comparison of Zenoderm with DuoDERM E in the treatment of split skin graft donor sites.

A prospective, randomised, controlled study compared Zenoderm (ZM) with DuoDERM E (DE) in the treatment of split skin graft donor areas in 64 patients. The donor site comfort was similar in the two groups. DE usage resulted in significantly faster healing but also a higher leakage rate than ZM. Two patients in the ZM group developed infection in their donor sites. The cost is significantly less with ZM than DE.